Shrink-Kon Thin Wall Heat Shrinkable Tubing
|
|
- Chester Doyle
- 6 years ago
- Views:
Transcription
1 Shrink Ratio 2:1 Shrink-Kon Thin Wall Tubing Styles 2:1 Shrink Ratio, Non-Lined Flame retardant. Resistant to common fluids and solvents. Meets UL 224, 125 C; CSA C22.2 No , 125 C; MIL-DTL-23053/5 Class 1&2; AMS 3636 & 3637; DEF STAN 59-97, Issue 3, Type 2a. Continuous Operating Temperature: -55 C to 135 C. Shrink temperature: 120 C. (See sample Minimum Maximum Nom. Recovered order below) Expanded I.D. Reduced I.D. Wall Thickness Code Cable Cat. No. in. (mm) in. (mm) in. (mm) Size CPO63-_-_.063 (1.6).031 (.8).017 (.4) - CPO93-_-_.093 (2.4).046 (1.2).020 (.5) - CPO125-_-_.125 (3.2).062 (1.6).020 (.5) #24-#30 AWG CPO187-_-_.187 (4.7).093 (2.4).020 (.5) #14-#22 AWG CPO250-_-_.250 (6.4).125 (3.2).025 (.6) #10-#16 AWG CPO375-_-_.375 (9.5).187 (4.7).025 (.6) #6-#12 AWG CPO500-_-_.500 (12.8).250 (6.4).025 (.6) #1-#6 AWG CPO750-_-_.750 (19.1).375 (9.5).030 (.8) 4/0-#2 AWG CPO1000-_-_ (25.4).500 (12.8).035 (.9) 350-#2/0 MCM CPO1500-_-_ (38.1).750 (19.0).040 (1.02) MCM CPO2000-_-_ (50.8) (25.9).045 (1.14) MCM Sample Orders Available Package Final Series Colour Size Order No. CP063 + O + 25 = CP Available Available Colours Packaging 0 = Black 25 = 25 reel C = Clear 6 = 6 2 = Red A = 4 4 = Yellow B = Bulk (see next page 5 = Green for length) 6 = Blue C = = White S = Green & Yellow Striped Note: Minimum order quantity s required. Contact your Regional Sales Office. Available in reels of 100' and 1000' and in other colours. Contact your Regional Sales Office. Material: Cross-linked Polyolefin. Temp. Rating: 125 C. Meets MIL /5 (no marking on tubing). When ordering standard package, order by package not feet. Use feet and inches only when ordering special cut lengths. Larger diameters available upon special request. Contact your Regional Sales Office., 6 in. Lengths Minimum Maximum Nominal Recovered Expanded I.D. Reduced I.D. Wall Thickness Cat. No. Colour Inches (mm) Inches (mm) Inches (mm) CPO Black.063 (1.6).031 (.8).017 (.4) CPO Black.093 (2.4).046 (1.2).020 (.5) CPO Black.125 (3.2).062 (1.6).020 (.5) CPO Black.187 (4.7).093 (2.4).020 (.5) CPO Black.250 (6.4).125 (3.2).025 (.6) CPO Black.375 (9.5).187 (4.7).025 (.6) CPO Black.500 (12.8).250 (6.4).025 (.6) CPO Black.750 (19.1).375 (9.5).030 (.8) CPO Black (25.4).500 (12.8).035 (.9) 11
2 Shrink-Kon Shrink Ratio 2:1 Custom Cut Lengths Thin Wall Tubing To best meet your requirements for thin wall heat shrinkable tubing, Thomas & Betts welcomes the opportunity to cut bulk reels of tubing. Minimum order requirement is one standard bulk reel and multiples thereof. Tubing cannot be cut smaller than 1 /2 inch. When ordering custom cut lengths of tubing, order by piece, not by length. To determine the minimum number of pieces to order, simply figure how many pieces of a specific length of tubing is required to make use of a complete bulk reel. Ordering Information Bulk Reel Family Expanded ID Qty Ft. Colour Packaging CPO = Cross Link 63 = 1 /16" = Black A = 4' Modified 93 = 3 /32" 1000 C = Clear B = Bulk Polyolefin 125 = 1 /8" = Red 187 = 3 /16" = Yellow 250 = 1 /4" = Green 375 = 3 /8" = Blue C = 100' 500 = 1 /2" = White 25 = 25' Reel 750 = 3 /4" N/A S = Green & 1000 = 1" N/A Yellow Striped 1500 = 1 1 /2" N/A 2000 = 2" N/A Example Material Size Colour Package CPO C Minimum order quantity: Standard case quantities and multiples thereof. No broken packages may be ordered. To order colours other than black and clear 3 /64" tubing or specials/cut lengths, contact your Regional Sales Office for minimum order quantities, price and availability. Example 1 If a bulk length of tubing is 1000 feet and the desired length of each individual piece is 6 inches, the minimum order requirement is 2000 pieces. Given (length of reel) 1000 Feet Convert to inches by multiplying by x 1000 Length of reel in inches = Divide by desired length Total number of 6 inch pieces in a 1000 foot reel (Minimum Order) = 2000 Example 3 CPO CPO material, size 125 ( 1 8"), black, 3 4 inches long. Example 2 If a bulk reel of tubing is 400 feet and the desired length of each individual piece is 2 inches, the minimum order requirement is 2400 pieces. Given (length of reel) 400 Feet Convert to inches by multiplying by x 400 Length of reel in inches = 4800 Divide by desired length Total number of 2 inch pieces in a 400 foot reel (Minimum Order) = 2400 Example 4 CPO CPO material, size 500 ( 1 2"), blue, 1 1 2" inches long. Tensile Strength ASTM D2671, ISO psi (15.0 MPa) Elongation ASTM D2671, ISO % Longitudinal Change on Recovery ASTM D %, -10% 2% Secant Modulus ASTM D psi (110 MPa) Specific Gravity ASTM D792, ISO/R " (colours) 0.95" (Clear) Restricted Shrinkage ASTM D2671 No Cracking Elongation after Heat Aging (168 hrs at 175 C) ASTM D % Heat Shock (4 hrs at 250 C) ASTM D2671 No Cracking or Flowing Low Temperature Flexibility (4 hrs at -55 C) ASTM D2671 No Cracking or Splitting Flammability ASTM D2671 Flame Retardant (except Clear) Volume Resistivity ASTM D ohm-cm Fluid Resistance MIL-DTL-23053/5, Good to Excellent Water Absorption ASTM D % 12
3 NEW Shrink-Kon Thin Wall Insulation Kits Shrink-Kon Thin Wall Insulation Kits Catalog No. Description Weight Each Kit UPC CHS-KIT 43' Assorted Colors, Sizes - 1 lb Thin Wall Heat Shrink Tubing in plastic reusable case HS-KIT 37' Assorted Sizes, Black Color 1 lb Thin Wall Heat Shrink Tubing in plastic reusable case CHS-KIT Thin Wall Insulation Kit Shrink-Kon thin wall heat shrink kits feature useful colors and sizes in a convenient resealable storage box. Now brought to you in color! Shrink-Kon s new Thin Wall Heat Shrink Kit features a large assortment of practical colors and sizes for your demanding jobs. Great for identification and adding a professional, finishing touch on wire termination projects. Over 43' of multi-colored polyolefin thin wall heat shrink Convenient plastic kit for single storage location Individual 6" pieces for easy installation 2:1 shrink ratio UL Recognized and CSA approved Wide range of sizes - 3 /16" to 1" Product included in CHS-KIT Color Quantity Per Kit Qty/Kit Size Part Number* Black Clear Blue Yellow Red Green White 36 3/16 CPO /4" CPO /8" CPO /2" CPO /4" CPO " CPO *Actual Part Numbers require suffix for appropriate color. The Original Black Version HS-KIT Over 37' of black polyolefin thin wall heat shrink Convenient plastic kit for single storage location Individual 6" pieces for easy installation 2:1 shrink ratio UL Recognized and CSA approved Product included in HS-KIT Qty/Kit Size Part Number 32 CPO CPO CPO CPO CPO CPO
4 Shrink-Kon Shrink Ratio 3:1 CPO-A Series Thin Wall 3:1, Adhesive Lined Adhesive lined heat shrink tubing with environmental sealing capability for general purpose commercial and industrial applications. Moisture-proof environmental seal. Flexible. High 3:1 shrink ratio for covering irregularly shaped objects. Continuous operating temperature: -55 C to 110 C. Shrink temperature: 120 C. Minimum Maximum Nominal Standard Expanded I.D. Recovered I.D. Recovered Wall Length Cat. No. (in.) (mm) (in.) (mm) (in.) (mm) (in.) (m) CPO-A CPO-A CPO-A CPO-A CPO-A CPO-A CPO-A CPO-A CPO-A Standard colour: Black NOTE: Non-standard colours, sizes and lengths available. Contact your Regional Sales Office. Minimum orders may be required. Tensile Strength ASTM D2671, ISO psi (15.0 MPa) Elongation ASTM D2671, ISO % Heat Shock (4 hrs. at 250 C) ASTM D2671 No Cracking or Flowing Longitudinal Change on Recovery ASTM D %/-5% Low Temperature Flexibility (4 hrs. at -55 C) ASTM D2671 No Cracking Specific Gravity ASTM D792, ISO R % Secant Modulus ASTM psi (11.0 MPa) Heat Resistance Properties (168 hrs. at 175 C) MIL-DTL-23053/4 240% Flammability ASTM D2671 Moderately Flame Retardant Volume Resistivity ASTM D ohm-cm Fluid Resistance MIL-DTL-23053/4, Good to Excellent Water Absorption ASTM D % 14
5 Shrink Ratio 2:1 Shrink-Kon CPO-HF Series Thin Wall, Halogen Free Zero halogen, heat shrink tubing for use in contained areas including underground transportation systems, shipboard, offshore, military and aerospace applications. Low smoke generation excellent fire safety characteristics. Flexible. Flame retardant. Abrasion resistant. Meets DEF STAN 59-97, Issue 3, Type 8. Continuous operating temperature: -40 C to 105 C. Shrink temperature: 120 C. Shrink ratio: 2:1. Minimum Maximum Nominal Minimum Expanded I.D. Recovered I.D. Recovered Wall Standard Length order Cat. No. (in.) (mm) (in.) (mm) (in.) (mm) (in.) (m) requirements CPO-HF (250) CPO-HF (250) CPO-HF (250) CPO-HF (250) CPO-HF (250) CPO-HF (250) CPO-HF (250) CPO-HF (250) CPO-HF (50) CPO-HF (50) CPO-HF (50) CPO-HF (50) CPO-HF (30) CPO-HF (30) NOTE: Available subject to quotation. Contact your Regional Sales Office. Standard colour: Black Minimum orders may be required. Tensile Strength ASTM D2637, ISO psi (10.0 MPa) Elongation ASTM D2671, ISO % Elongation after Heat Aging (168 hrs. at 135 C) ASTM D % Heat Shock (4 hrs. at 150 C) ASTM D2671 No Cracking or Flowing Longitudinal Change on Recovery ASTM D %, -10% Low Temperature Flexibility (4 hrs. at -40 C) ASTM D2671 No Cracking or Splitting Specific Gravity ASTM D792, ISO R % Secant Modulus ASTM psi (11.0 MPa) Restricted Shrinkage ASTM 2671 No Cracking Smoke Index NES Toxicity Index NES Flame Temperature Index NES Flammability ASTM D2671 Flame Retardant Volume Resistivitfly ASTM D ohm-cm Fluid Resistance DEF STAN 59-97, Good to Excellent Water Absorption ASTM D % 15
6 Shrink-Kon Shrink Ratio 2:1 CHS Series Clear Thin Wall PVC Heat Shrink Flexible PVC Heat Shrink Tubing suitable for industrial and electronic applications. Allows user to inspect die and crimp details after installation of heat shrinkable insulation. UL standard UL224, VW-1 rated. CSA standard C22.2 no Highly flame retardant. Flexible. Low shrink temperature of 110 C. Dielectric strength 600 volts/mil. Allows visual inspection of completed crimp. Minimum Maximum Nominal Code Standard Expanded I.D. Recovered I.D. Recovered Cable Length Cat. No. (in.) (mm) (in.) (mm) (in.) (mm) Size (ft) CHS #22-#18 AWG 50 CHS18B #22-#18 AWG 250 CHS #16-#10 AWG 50 CHS14B #16-#10 AWG 250 CHS #8-#6 AWG 50 CHS38B #8-#6 AWG 250 CHS #4-#2 AWG 50 CHS12B #4-#2 AWG 250 CHS #1-3/0 MCM 50 CHS34B #1-3/0 MCM 250 CHS /0-300 MCM 25 CHS100B /0-300 MCM 100 CHS MCM 25 CHS112B MCM 100 CHS MCM 25 CHS200B MCM 100 Standard colour: Clear Allows visual inspection of embossed die code. Inspection of cable through peep hole, shows that cable is properly positioned. Tensile Strength ASTM D2671, ISO psi (23.0 MPa) Elongation ASTM D2671, ISO % Longitudinal Change ASTM D2671 +/-10% 2% Secant Modulus ASTM psi (110 MPa) Specific Gravity ASTM D792, ISO R Elongation after Heat Aging (168 hrs. at 136 C) ASTM 2671, ISO % Heat Shock (4 hrs. at 250 C) ASTM D2671 No Cracking or Flowing Low Temperature Flexibility (1 hrs. at 10 C) ASTM D2671 No Cracking or Splitting Flammability ASTM D2671 Self Extinguishing Volume Resistivity ASTM D ohm-cm Fluid Resistance MIL-DTL-23053, Good to Excellent Water Absorption ASTM D % 16
Heat-Shrinkable Tubing
CPO 2:1 Shrink Ratio Thin-Wall Tubing, Non-Lined Flame-retardant, cross-linked polyolefin Continuous operating temperature: -55 C to 135 C Shrink temperature of 120 C Meets UL and CSA standards; MIL-DTL-23053/5
More informationFlame-retardant, cross-linked polyolefin. Shrink temperature of 120 C. Cat. No.*
2:1 Shrink Ratio CPO Series Thin-Wall Tubing, Non-Lined CATALOGUE NUMBER CONSTRUCTION Final Series Colour ft Order No. CPO63 + 0 + C = CPO63-0-C Available Colours 0 Black 5 Green C Clear 6 Blue 2 Red 9
More informationFP30112WHITE100 Heat Shrink TW Tubing 100' Spool
FP30112WHITE100 Heat Shrink TW Tubing Minnesota Mining (3M) Catalog Number FP30112WHITE100 Manufacturer Minnesota Mining (3M) Description Tubing, Heat; ; 600 V; Cable Size 1/2 Inch; Thin Wall; Shrink Temperature
More informationShinn Thon UK Ltd 1 st Floor, 223 Dalton Road, Barrow in Furness, Cumbria. LA14 1PQ Tel: Fax:
I. Single Wall Tubing (Thin Wall) (Product No. : W-1-PT) 1.General Description: Flexible, Flame-Retardant, General Purpose, Polyolefin Tubing Product Facts 1) 2:1 & 3:1 shrink ratio; 2) Super abrasion
More informationHeavy Wall Heat Shrinkable Tubing 5-7. Flame Retardant Heavy Wall Heat Shrinkable Tubing 8. Heat Shrinkable Ends Caps 9
Heavy Wall Heat Shrinkable Tubing 5-7 Flame Retardant Heavy Wall Heat Shrinkable Tubing 8 Heat Shrinkable Ends Caps 9 Heat Shrinkable Breakout Boots 10 Shrink Ratio 3:1 Shrink-Kon Heavy Wall Heat Shrinkable
More informationTHE POWER OF T&B ENGINEERED PRODUCTS AND SERVICES
Thomas & BettsMORE POWER TO YOU For over 70 years, Canadian electrical contractors, plant engineers and engineering consultants have placed their trust in Thomas & Betts electrical components. Today, Thomas
More informationData Sheet Flexible Polyolefin Heatshrink Tubing 3:1
RS Stock No.700-4453 RS Stock No.700-4456 RS Stock No.700-4450 Data Sheet Flexible Polyolefin Heatshrink Tubing 3:1 Applications Designed to provide specially expansion ratio for applications of military
More informationHalogen Free Environmentally Friendly Heat Shrinkable Wire Identification Sleeves
MSVLU MSVLU(C) Halogen Free Environmentally Friendly Heat Shrinkable Wire Identification Sleeves Description MSVLU series is halogen free, environmentally friendly, heat shrinkable identification sleeves.
More informationUL RATED HEAT SHRINK TUBING
UL RATED HEAT SHRINK TUBING POLYOLEFIN SINGLE WALL TUBING POLYOLEFIN DUAL WALL TUBING www.heatshrinkdirect.net CB-HFT(600) UL/CUL NON-ADHESIVE HEAT SHRINKABLE TUBING CB-HFT(600) is UL/CUL rated halogen-free,
More informationThermofit MIL-LT Tubing Low Shrink-Temperature Polyolefin, Flexible, Heat-Shrinkable
Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-1171 Issue 7 December 5, 2001 Issue 6 Thermofit MIL-LT Tubing Low Shrink-Temperature
More informationinsulate Seal Protect Single Wall ProductS
In s u l at e Se a l Pr o t e c t Single Wall Products Table of Contents Single Wall Products CHM 140...3 Semi-rigid tubing CPX 100...5 Flexible, multi-purpose tubing CPX 201...7 Flexible, colour coded
More informationHeatshrink & Cable Repair Solutions
PAGE EASI-SHRINK HEATSHRINK SLEEVING ZERO-HALOGEN HEATSHRINK SLEEVING DR-25 HEATSHRINK TUBING KYNAR HIGH TEMPERATURE HEATSHRINK HEATSHRINK KITS ADHESIVE LINED HEATSHRINK SLEEVING 347-348 349-350 351 352
More informationVERSAFIT V2 AND V4 TUBING Polyolefin, Flexible, Heat-Shrinkable, Flame-Retardant
TE Connectivity 300 Constitution Drive Menlo Park, CA 94025 USA Raychem Tubing Specification This Issue: Date: Replaces: RW-3023 Issue 9 Nov 21, 2016 Issue 8 VERSAFIT V2 AND V4 TUBING Polyolefin, Flexible,
More informationSWFR. Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing PRODUCT DESCRIPTION KEY FEATURES
SWFR Place hero product image here shorter square image space available. Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing PRODUCT DESCRIPTION SWFR tubing from TE Connectivity
More informationSWFR. Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing PRODUCT DESCRIPTION KEY FEATURES
SWFR Place hero product image here shorter square image space available. Single Wall, Heat Shrink Tubing Highly flame-retardant, UL VW-1 rated, Zerohal tubing PRODUCT DESCRIPTION SWFR tubing from TE Connectivity
More informationAMS-Military Grade Heat Shrinkable Wire Identification Sleeves
MS-VLA MS-VLA(C) AMS-Military Grade Heat Shrinkable Wire Identification Sleeves Description MSVLA series is the military grade cable and wire identification sleeves, which is made of cross-linked environmentally
More informationTHERMOFIT RNF-100 TUBING Polyolefin, Flexible, Heat-Shrinkable
Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-350 Issue 17 April 9, 2004 Issue 16 THERMOFIT RNF-100 TUBING Polyolefin, Flexible,
More informationTermco Heatshrink.
Termco Heatshrink Thin Wall Tubing (Flame Retardant) Clear Thin Wall Tubing Green/Yellow Thin Wall Tubing Dual Wall Tubing Medium Wall Tubing Cable End Caps Heat Shrink Miniature End Cap Heat Shrinkable
More informationHongshang Heat Shrinkable Materials Co., Ltd Issue No.9 Qilin Rd, Nankeng Cun, Bantian, Longgang, Shenzhen Date TECHNICAL REPORT ON
Spec.H-2 (3X) Issue 2011 Page 1 /5 Hongshang Hongshang Heat Shrinkable Materials Co., Ltd Issue 2011 No.9 Qilin Rd, Nankeng Cun, Bantian, Longgang, Shenzhen Date 2011-9-7 China, 518129 Spec. H-2 (3X) TECHNICAL
More information3M Heavy Wall Heat Shrink Tubing ITCSN
3M Heavy Wall Heat Shrink Tubing ITCSN Data Sheet September 2013 Description 3M Heavy Wall Heat Shrink Tubing ITCSN is designed to provide reliable performance for electrical splices, connections, and
More informationRAYCHEM NT-MIL TUBING Modified Chlorinated Polyolefin, Elastomeric, Flexible, Flame Retarded, Heat Shrinkable
Tyco Electronics Corporation 305 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RW-3030 Issue 3 16-Jun-15 Issue 2 RAYCHEM NT-MIL TUBING Modified Chlorinated Polyolefin,
More informationRAYCHEM TAT-125 ADHESIVE LINED TUBING Polyolefin, Flexible, Heat-Shrinkable, Dual Wall
Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RW-3032 Issue 1 June 9, 2004 RAYCHEM TAT-125 ADHESIVE LINED TUBING Polyolefin, Flexible,
More informationTHERMOFIT CRN TUBING Polyolefin, Semirigid, Heat-Shrinkable
TE Connectivity 300 Constitution Drive Menlo Park, CA 94025 USA Raychem Tubing Specification This Issue: Date: Replaces: RT-360 Issue 10 30-Jan-15 Issue 9 THERMOFIT CRN TUBING Polyolefin, Semirigid, Heat-Shrinkable
More informationProtection of A/C connection using a heat shrinkable jacket
Protection of A/C connection using a heat shrinkable jacket 1. Position the heat-shrinkable jacket after the cutting, deburring, inserting of standardized brass nut and flaring operations. 2. Connect the
More informationSPEIFICATION RW-2530 Document No TMS 90 SCE Marker
SPECIFICATION: RW 2530 THIS ISSUE: ISSUE 2 DATE: February 2014 SPEIFICATION RW-2530 Document No. 108-121029 TMS 90 SCE Marker TMS 90 SCE Markers are for use in permanent marking applications up to 135
More informationTHERMOFIT RNF-150 TUBING Flexible, Heat-Shrinkable, Flame-Retarded Modified Fluoropolymer
TE Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Raychem Specification This Issue: Date: Replaces: RT-370 Issue 6 24-Sep-12 Issue 5 1. SCOPE THERMOFIT RNF-150 TUBING Flexible, Heat-Shrinkable,
More informationProtect. Heatshrink and cable repair solutions
Protect Heatshrink and cable repair solutions 316 A premium selection of heatshink sleevings and cable repair products including moisture barrier kits, heatshrink repair sleeves, end caps and breakout
More informationRaychem RT-555 TUBING Modified Fluoropolymer, Radiation Crosslinked, Flexible, Abrasion Resistant, Flame Retardant, Heat Shrinkable
TE Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Raychem Specification This Issue: Date: Replaces: RT-555 Issue 7 29-Apr-14 Issue 6 Raychem RT-555 TUBING Modified Fluoropolymer, Radiation
More informationT&B Catalog Number: TY15X2SPG6 UPC Number: Description: Nominal Width (inches) 1.5 Nominal Height (inches) 2
T&B Catalog Number: TY15X2SPG6 UPC Number: 78621095980 Description: Wiring Duct Solid Wall 1-1/2"x2" Rigid PVC Gray Status: Active General Style Nominal Width (inches) 1.5 Nominal Height (inches) 2 Material
More informationShrink-Kon. Shrink-Kon. In This Section.
In This Section Shrink-Kon Overview...F2 F3 Heavy-Wall Heat-Shrinkable Tubing...F4 F7 Heat-Shrinkable End Caps...F8 Heat-Shrinkable Breakout Boots...F9 Medium-Wall Heat-Shrinkable Tubing...F10 Thin-Wall
More informationLow Voltage Live Pot End Kits
Low Voltage Live Pot End Kits Standard heat shrink end caps are often used to seal cable ends. However where cables are live, heat shrink live pot end kits should be used. Each core is separately sealed
More informationTTMS MARKER SYSTEM TTMS
RW 2517 Revision 2 Page 1 of 7 Date Printed 29Apr10 Tyco Electronics Cheney Manor, Swindon. UK SPECIFICATION: RW 2517 THIS ISSUE: ISSUE 2 DATE: 08 September 2009 REPLACES: RW 2517 ISSUE 1 TTMS MARKER SYSTEM
More information3M Medium-Wall Heat Shrink Tubing IMCSN
3M Medium-Wall Heat Shrink Tubing IMCSN Data Sheet April 2017 Product Description 3M Medium-Wall Heat Shrink Tubing IMCSN is designed to provide reliable performance for electrical splices, connections,
More informationSpecification This Issue: Date: Replaces: RT-780_Type-I Issue 5 November 10, 2009 Issue 4. Raychem
Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Raychem Specification This Issue: Date: Replaces: RT-780_Type-I Issue 5 November 10, 2009 Issue 4 Raychem RT-780 Type I Tubing
More informationRaychem Fluoroelastomer Tubing Flexible, Fluid Resistant, Heat-Shrinkable
Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RW-3037 Issue 2 July 26, 2006 Issue 1 Raychem Fluoroelastomer Tubing Flexible, Fluid
More informationTHERMOFIT SFR TUBING Modified Silicone Elastomer, Flame-Retarded, Heat-Shrinkable
Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-1140 Issue 6 August 20, 2014 Issue 5 THERMOFIT SFR TUBING Modified Silicone Elastomer,
More informationHeat-Shrinkable Tubing
Table of Contents Overview... C2C3 Heavy-Wall... C4C9 Medium-Wall... C10 Thin-Wall...C11C16 Splice Insulators and Insulating Covers...C17C22 Installation Tools...C23 Installation Guidelines and Cross Reference...C24
More informationTyco Fluoroelastomer Tubing Flexible, Fluid Resistant, Heat-Shrinkable
RT-1146 Page 1 of 7 Rev 7 RT-1146 Tyco Fluoroelastomer Tubing Flexible, Fluid Resistant, Heat-Shrinkable SCOPE: This specification covers the requirements for one type of highly flexible, electrical-insulating
More information3M Medium-Wall Heat Shrink Tubing IMCSN
3M Medium-Wall Heat Shrink Tubing IMCSN Data Sheet November 2017 Product Description 3M Medium-Wall Heat Shrink Tubing IMCSN is designed to provide reliable performance for electrical splices, connections,
More informationELECTRICAL SOLUTIONS
Ties HSTTP PVC Heat Shrink Applications include insulating and protecting wires and cables Good resistance to most fuels and oils Shrink ratio: 2:1 Flammability: Meets UL 224 VW-1 UL Recognized, CSA Certified
More informationES2000 TUBING Environmental Sealing, Polyolefin, Semirigid, Adhesive-Lined
Tyco Electronics Corporation 305 Constitution Drive Menlo Park, CA 94025 USA Raychem Tubing SPECIFICATION: THIS ISSUE: DATE: REPLACES: RT-1112 Issue 5 April 22, 2008 Issue 4 ES2000 TUBING Environmental
More informationProtective Tubing. Comprehensive range of HEAT-SHRINKABLE and COLD APPLIED TUBING
INTRODUCTION Comprehensive range of HEAT-SHRINKABLE and COLD APPLIED TUBING Performance tubing for extreme environments and commercial applications Heat-shrinkable tubing is available in an extensive range
More informationTHERMOFIT SCL TUBING Polyolefin, Selectively Crosslinked, Semirigid, Heat Shrinkable
Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-1301 Issue 7 October 3, 2003 Issue 6 THERMOFIT SCL TUBING Polyolefin, Selectively
More informationDETAIL SPECIFICATION SHEET CABLE, ELECTRICAL, -20 C TO +105 C, 1000 VOLTS, TYPE LSFSGU
INCH-POUND MIL-DTL-24643/17F 1 October 2009 SUPERSEDING MIL-DTL-24643/17E 22 August 2002 DETAIL SPECIFICATION SHEET CABLE, ELECTRICAL, -20 C TO +105 C, 1000 VOLTS, TYPE LSFSGU This specification is approved
More informationRouting, Protection and Insulation. Heat Shrink Tubing. Protection and insulation of wires and cables
Routing, Protection and Insulation Heat Shrink Tubing Protection and insulation of wires and cables Heat Shrink Tubing Heat shrink tubing is an excellent solution for providing strain relief, insulation
More informationHeatshrink and cable repair solutions
Protect Heatshrink and cable repair solutions A premium selection of cable repair solutions incorporating insulated sleeving, heatshink sleeving, cable jointing and heatshrink repair solutions including
More information3.1 Heat shrinkable tubing 3.2 Braided sleeving
Protection 3 Page 3.1 Heat shrink tubing selection guide 144 Application overview heat shrinkable tubing 146 The right heat shrink tube 147 TCN20, 2:1, fast shrinkable, self-extinguishing 148 TCN20, 3:1,
More information1Heat-shrinkable Tubing
SCL Semirigid, Encapsulant-Lined, Polyolefin Tubing Product Facts 3:1 shrink ratio Splash-resistant, moistureresistant covering; not intended for use where immersion in fluids is required Rugged protection
More informationBURNDY. Accessories TABLE OF CONTENTS. Heavy Wall Heat Shrinkable End Cap... F-9. Introduction... F-2. Clear Heat Shrink Tubing...
BURNDY Accessories TABLE OF CONTENTS Introduction........................ F-2 PENETROX (Install Connections)................ F-2 PENETROX A, PENA-1 LB, PENETROX A-13, PENETROX E... F-3 PENETROX Technical
More informationSPECIFICATION RW-2514 Document Number NBC MARKER SYSTEM (Ladder Form) NBC-SCE
SPECIFICATION: RW 2514 THIS ISSUE: ISSUE 2 DATE: February 2014 SPECIFICATION RW-2514 Document Number 108-121017 NBC MARKER SYSTEM (Ladder Form) NBC-SCE 1. SCOPE NBC-SCE Markers are designed for use where
More informationF = Polyethylene R = Fire Resistant Polyethylene FR = Flame Retardant Polyethylene N = Nylon Q = 25' L = 50' C = 100' 50 = 1/2"
Pan-Wrap Installation Tools Patented installation ol with 180 opening allows easy loading of maximum bundle diameters speed installation, providing the lowest installed cost Part Number Color For Use With
More informationApplications. Features
GSHS 1625 FLEXIBLE, FLAMERETARDANT POLYOLEFIN 600V, 125 O C, 2:1 Applications GSHS1625 is a flexible, flameretardant heat shrinkable polyolefin tube. It is designed for a vide range of application including
More informationThermofit Polyolefin Molded Components Flame-Retarded. Semi-Rigid, Heat-Shrinkable
Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-301 Issue 12 March 2, 1999 Issue 11 Thermofit Polyolefin Molded Components Flame-Retarded.
More informationTRSA Sleeving SCOPE. This Quality Assurance Specification establishes the quality standard for a heat-shrinkable, flexible polyolefin sleeving.
RK 6743 Revision 4 Page 1 of 7 Date Printed 31-Mar-14 RK 6743 Revision 4 TRSA Sleeving SCOPE This Quality Assurance Specification establishes the quality standard for a heat-shrinkable, flexible polyolefin
More informationDCPT SLEEVING SCOPE. This document is electronically reviewed and approved and so no signatures will appear.
RW 2056 Revision 4 Page 1 of 10 Date Printed 3/3/2014 RW 2056 Revision 4 DCPT SLEEVING SCOPE This Quality Assurance Specification establishes the quality standard for a heat-shrinkable, electrically-insulating,
More informationRaychem brand Moulded Components Flame Retarded, Semi-Rigid, Heat Shrinkable, Elastomer (-25)
RW-2070 Revision 2 Page 1 of 8 Date Printed 18-Jul-12 RW-2070 Revision 2 Raychem brand Moulded Components Flame Retarded, Semi-Rigid, Heat Shrinkable, Elastomer (-25) SCOPE This Quality Assurance Specification
More informationTHE POWER OF T&B ENGINEERED PRODUCTS AND SERVICES
Thomas & Betts MORE POWER TO YOU For over 70 years, Canadian electrical contractors, plant engineers and engineering consultants have placed their trust in Thomas & Betts electrical components. Today,
More informationIEEE 1580 Type P MOR Polyrad XT-125 Multi Conductor
TABLE OF CONTENTS SECTION SUBJECT PAGE I. SCOPE...1 II. APPLICABLE DOCUMENTS...1 III. CONDUCTOR...2 IV. SEPARATOR...2 V. INSULATION...2 A. Physical Properties...2 B. Electrical Properties...3 C. Qualification
More informationHeat Shrink Technology
Heat Shrink Technology Welcome to SG-Canusa Leading in Heat Shrink Technology You will find inside a full package of SG-Canusa product information. There s a Selection Chart for a quick overview of all
More informationVERSAFIT-1/2-KT2-REFILL Product Details
TE Connectivity My Cart My Part Lists Sign In/Register English (Change) Have a Question? Chat with a Product Information Specialist What can we help you find? Products Industries Resources About TE My
More informationBURNDY Products. Accessories TABLE OF CONTENTS. Heavy Wall Heat Shrinkable End Cap...M-9. Introduction...M-2. Clear Heat Shrink Tubing...
TABLE OF CONTENTS Introduction...M-2 PENETROX (Install Connections)...M-2 PENETROX A, PENA-1 LB, PENETROX A-13, PENETROX E...M-3 PENETROX Technical & Ordering Information...M-4 Thin Wall Heat Shrink Tubing
More information4Molded Parts. Molded Parts. Table of Contents
Molded Parts Table of Contents Overview 4-2 General Information 4-3, 4-4 Selection Tables 4-5, 4-6 Part Numbering System 4-7 Visual Selection Guide 4-8 to 4-20 Boot Adapter Selection Tables 4-21 to 4-23
More informationParflex/Atlantic. Fluoropolymer Tubing Products. Catalog 4150/USA March 2003 revised Sept. 2003
Fluoropolymer Tubing Products Catalog 4150/USA March 2003 revised Sept. 2003 Table of Contents Fluoropolymer Tubing Products Introduction... 3 Matrix... 3 Summary of Properties... 4 Fluid Handling Tubing
More informationTAT-125-3/16-0-STK Product Details
TE Connectivity My Cart My Part Lists Sign In/Register English (Change) What can we help you find? Products Industries Resources About TE My Account Innovation Support Center TAT-125-3/16-0-STK Product
More informationTHERMOFIT RT-218 TUBING Modified Polyvinylidene Fluoride, Low Outgassing, Heat-Shrinkable
Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-218 Issue 4 July 3, 1997 Issue 3 THERMOFIT RT-218 TUBING Modified Polyvinylidene
More informationMaxCell Technical Manual. Design Parameters 4G Product Line
MaxCell Technical Manual Design Parameters 4G Product Line 4G Materials of Construction 4G Fabric Warp - Polyester Monofilament Diameter = 0.23 +/- 0.02 mm Denier = 520 +/- 25 Filling - Nylon 6 Monofilament
More informationDETAIL SPECIFICATION SHEET CABLE, ELECTRICAL, -20 C TO +90 C, TYPE LS3SWU (INCLUDING VARIATION LS3SWUS)
INCH-POUND 11 July 2011 USED IN LIEU OF MIL-DTL-24643/36F 01 October 2009 DETAIL SPECIFICATION SHEET CABLE, ELECTRICAL, -20 C TO +90 C, TYPE LS3SWU (INCLUDING VARIATION LS3SWUS) This specification is approved
More informationSPECIFICATION CONTROL DRAWING
SPECIFICTION CONTROL DRWING Product Dimensions Product Rev s Received fter Free Recovery Maximum Weight Product ±2.54 øb W øb W Pounds/mpc Name (±0.00) min min max min D-300-0 E 25.40 4.45 0.25 2.03 0.76.5
More informationPotting & Encapsulating
Potting & Encapsulating Potting and encapsulating compounds are used to provide mechanical reinforcement to housed assemblies, to fill large voids, and to protect components from the effects of exposure
More informationRBK-ILS-125 SCOPE. This Quality Assurance Specification establishes the quality standard for RBK-ILS-125.
RK 6638 Revision 9 Page 1 of 22 Date Printed 30-Apr-10 RK 6638 Revision 9 RBK-ILS-125 SCOPE This Quality Assurance Specification establishes the quality standard for RBK-ILS-125. The objective of this
More informationRaychem S1297 and /97 Hot Melt Adhesive
Tyco Electronics Corporation 300 Constitution Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RW-2019 ISSUE 1 November 16, 2005 None Raychem S1297 and /97 Hot Melt Adhesive 1.0
More informationRW 2201 Revision 3 Page 1 of 6 Date Printed 3/13/2014 TUGA-GP SLEEVING SCOPE
RW 2201 Revision 3 Page 1 of 6 Date Printed 3/13/2014 RW 2201 Revision 3 TUGA-GP SLEEVING SCOPE This Quality Assurance Specification establishes the quality standard for a heat-shrinkable, non-flame-retarded,
More informationPERFORMANCE SPECIFICATION SHEET
METRIC MIL-PRF-85045/17C 17 June 2014 SUPERSEDING MIL-PRF-85045/17B 16 September 1999 PERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, EIGHT FIBERS, ENHANCED PERFORMANCE, CABLE CONFIGURATION TYPE 2
More informationSPECIFICATION RW-2525 Document Number TMS - CCUV SLEEVING
SPECIFICATION: RW 2525 THIS ISSUE: ISSUE 2 DATE: February 2014 SPECIFICATION RW-2525 Document Number 108-121025 TMS - CCUV SLEEVING 1. SCOPE This Quality Assurance Specification establishes the quality
More information3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series
3M Cold Shrink Silicone Rubber Connector Insulators 8440 Series Data Sheet May 2014 Product Description 3M Cold Shrink Connector Insulators 8440 Series are open-ended, silicone rubber, tubular sleeves.
More informationGeneral Information CROSS REFERENCE GUIDE 1 SELECTION GUIDE 2-3 PART NUMBER GUIDE 4. Product Type Heat Shrink Thin Wall Tubing
INDEX General Information Page CROSS REFERENCE GUIDE 1 SELECTION GUIDE 2-3 PART NUMBER GUIDE 4 Product Type Heat Shrink Thin Wall Tubing Page Q2-CB ULTRA THIN WALL, FLEXIBLE, ENVIRONMENT FRIENDLY, FLAME
More informationSilicone Material Selection Guide
Silicone Material Selection Guide MARKETS Aircraft Rail Automotive Telecommunications & Electrical Enclosures Portable Communications Exterior Lighting Medical Devices Wire, Cable & Fiberoptics Manufacturing
More informationOLFLEX TUBING & SLEEVING
OLFLEX TUBING & SLEEVING Lada sin costo 0 800-024-5277 ventas@lappmexico.com www.lappmexico.com Table of Contents GENERAL PURPOSE HEAT SHRINKABLE TUBING OLFLEX TWPVC 4 High Strength, Extra Durable, Irradiated
More informationDETAIL SPECIFICATION SHEET CABLE, ELECTRICAL, TYPE LSC5FS (INCLUDING VARIATIONS LSC5FSW, LSC5OS, AND LSC5OSW)
INCH-POUND MIL-DTL-24643/59 9 September 2005 DETAIL SPECIFICATION SHEET CABLE, ELECTRICAL, TYPE LSC5FS (INCLUDING VARIATIONS LSC5FSW, LSC5OS, AND LSC5OSW) This specification is approved for use by all
More informationTable of Contents. Applications...3. Extruded Sizes...7. Value Added Services Heat Shrinkable Extrusions Technical Information...
Table of Contents Applications...3 Medical...4 Industrial...5 Extruded Sizes...7 PTFE Sub-Lite-Wall Extruded&HeatShrinkableTubing...8 ExtrudedTubing(AWG)...10 HeavyConstructionTubing...14 HeavyWallTubing...15
More informationTable of Contents. Applications...3 Medical...4 Industrial...5
Table of Contents Applications...3 Medical...4 Industrial...5 Extruded Sizes...7 PTFE Sub-Lite-Wall Extruded&HeatShrinkableTubing...8 ExtrudedTubing(AWG)...10 HeavyConstructionTubing...14 HeavyWallTubing...15
More informationABRASION PROTECTION ELECTRICAL SOLUTIONS
ABRASION PROTECTION Panduit abrasion protection products provide an economical and easy way to insulate, protect, bundle and color-code components and cable. A wide variety of sizes and materials are available
More informationHeat Shrink Technology
Heat Shrink Technology SG-Canusa A Global Success SG-Canusa provides electrical and mechanical insulation solutions for the Automotive, /Utility, Electronics and Communications markets. Founded in 1972,
More informationYOUR PARTNER FOR. fluoropolymer products
YOUR PARTNER FOR fluoropolymer products ScanTube has been manufacturing tubes and profiles from fluoropolymers such as PTFE, FEP, PFA, PVdF, ETFE and E-CTFE for more than 30 years. In 2015 ScanTube became
More informationSection 14. Shrink & Non-Shrink Tubing
Section 14. 253 Table of Contents PVC...256 HS-101...256 HS-105...257 HS-105 x.032...258 4900...259 4900 X.032...260 TE Connectivity...261 Single Wall RNF-100...261 RNF-150...262 Versafit...263 Versafit
More informationHeat Shrink Tubing Selection Guide Use our flow chart to find the correct heat shrink tubing for your particular application.
2.1 Insulation Products Technical Information Heat Shrink Tubing Selection Guide Use our flow chart to find the correct heat shrink tubing for your particular application. Begin your search in the flow
More informationRail Wire Guide. Harnessing and Electro-Mechanical Solutions for Demanding, Harsh Environment Applications... LFH FREE
Harnessing and Electro-Mechanical Solutions for Demanding, Harsh Environment Applications... Railway Market: 100E Wire ZHPCG Cable SHF260 Flexible Cable Rail Wire Guide LFH Low Fire Hazard HALOGEN FREE
More informationWire and Cable SPEC 44 Wire and Cable
High-performance wire and cable sulation system for 65 C to Wire and Cable SPEC 44 Wire and Cable Applications Hookup and signal wire and cable used aircraft, avionics, military electronics, satellites,
More informationPERFORMANCE SPECIFICATION SHEET
METRIC MIL-PRF-85045/25B 17 June 2014 SUPERSEDING MIL-PRF-85045/25A 19 January 2010 PERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, SEVEN TUBE, BLOWN OPTICAL FIBER, STANDARD AND ENHANCED PERFORMANCE,
More informationMolded Parts. Table of Contents
Molded Parts Table of Contents Overview 4-2 General Information 4-3, 4-4 Selection Tables 4-5, 4-6 Part Numbering System 4-7 Visual Selection Guide 4-8 to 4-20 Boot Adapter Selection Tables 4-21 to 4-23
More informationHeat-Shrinkable Tubing
Table of Contents Note: Users should independently evaluate the suitability of the product for their application. Before ordering, check with Tyco Electronics for most current data. Overview.....................................................3-3
More informationWhen a standard or other referenced document referred to in this specification is superseded by an approved revision, the revision shall apply.
I. References When a standard or other referenced document referred to in this specification is superseded by an approved revision, the revision shall apply. II. Listing The conduit shall be listed by
More informationBundling, Insulating and Sealing Products
Product Facts Plastic cable wrap provides an easy way to bundle cable, wire, tubing or hoses Helps protect bundles against abrasion caused by vibration Coiled wrap allows wiring harness breakouts Nylon
More informationFLAME RETARDANT POLYPROPYLENE SHEET
FORMEX TM GK/FORMEX PRODUCT DATA FLAME RETARDANT POLYPROPYLENE SHEET FRP Products 847 299 2222 FAX 847 390 8727 TEST METHOD FORMEX-10 FORMEX GK-10 FORMEX GK-17 FORMEX GK-30 FORMEX GK-40 COLOR NATURAL NATURAL/BLACK
More informationPOTTING & ENCAPSULATING
POTTING & ENCAPSULATING ASSEMBLY PRODUCTS 38 POTTING & ENCAPSULATING Potting and Encapsulating Compounds are used to provide mechanical reinforcement to housed assemblies, to fill large voids, and to protect
More information*** Supercedes: BECO E and COM , , & ***
7/27/09 Page 1 of 9 R5 *** Supercedes: BECO E2.9-27.4 and COM 1-0696, 2-0196, & 5-0385 *** 1.0 Scope #2 AWG to 1000 KCMIL CONCENTRIC NEUTRAL JACKETED CABLES RATED 5-35 kv These Specifications cover single
More informationPERFORMANCE SPECIFICATION SHEET
METRI MIL-PRF-85045/29B 9 June 2014 SUPERSEDING MIL-PRF-85045/29A 14 May 2009 PERFORMANE SPEIFIATION SHEET ABLE, FIBER OPTI, TWELVE/EIGHTEEN FIBER BUNDLE, BLOWN OPTIAL FIBER, ABLE ONFIGURATION TYPE 3 (ABLE
More informationMecoline IS RDX 5241 F
Radiation cross-linkable PVDF flame retardant compound Compound class Compound category Flame retardant Insulation / sheathing Standards Halogenated NEMA WC 27500 SAE AS 81044/9 SAE AS 81044/12 SAE AS
More informationWhen a standard or other referenced document referred to in this specification is superseded by an approved revision, the revision shall apply.
I. References When a standard or other referenced document referred to in this specification is superseded by an approved revision, the revision shall apply. II. Listing The conduit shall be listed by
More informationHeat Shrink Technology
Heat Shrink Technology Welcome to SG-Canusa Leading in Heat Shrink Technology You ill find inside a full package of SG-Canusa product information. There s a Selection Chart for a quick overvie of all products
More information