Annex to the Accreditation Certificate D-PL
|
|
- Jonah Randall
- 6 years ago
- Views:
Transcription
1 c GmbH Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005 period ofvalidity: to Dateofissue: Certificate Holder: IFO - Institut für Oberflächentechnik GmbH Alexander-von-Humboldt-Straße 19, Schwäbisch Gmünd Tests in the fields: Testing of coatings or metal and plastic surfaces against corrosion, climatic or environmental impact and other contamination factors; Corrosion analyses, including chemicat, physico-chemical tests on metallic and non-metallic coatings and structural elements äs well äs metallic and plastic surfaces and coatings; Testing of mechanical properties of coatings; Testing of performance properties of coatings with selected non-destructive testing Abbreviations used : please referto the last page The testing laboratory is permitted, without being required to inform and obtain prior approval from, to use Standards or equivalent testing methods listed here with different issue dates. This document is a translation. The definitive version is the original German annex to the accreditation certificate. 1/8
2 Annex to accredltation certificate D-PL c l. Chemical and physico tests testing on coatings and corrossion DINEN ISO DIN EN Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zincaluminium alloys - Test methods Determination of hexavalent chromium in corrosion protection layers - Qualitative analysis (withdrawn Standard) HausmethodeOB Residual soiling for particle greater 150 \i m in metallic components DIN EN ISO Determination of ph DIN Determination oftemperature (C 4) DIN EN Water quality; determination of electrical conductivity DIN EN ISO DIN EN ISO Aluminium and aluminium alloys - Anodizing - Part 4: Estimation of loss of absorptive power of anodic oxidation coatings after sealing by dye Spot test with prior acid treatment (withdrawn Standard) Anodizing of aluminium and its alloys - Estimation of loss of absorptive power of anodic oxidation coatings after sealing - Dye- Spot test with prior acid treatment DIN EN DIN EN ISO Aluminium and aluminium alloys - Anodizing - Part 7: Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution with prior acid treatment (withdrawn Standard) Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in phosphoric acid/chromic acid solution Perlod ofvalidity: to Transtation - 2/8
3 Annextoaccreditation certificate D-PL c 2. Testing of mechanical properties of coatings 2.1 Mechanical properties in air mechanical and physical testing of deformation behaviour and failure limits of aluminium and steel coatings in air DIN EN ISO Paints and varnishes - Bend test (cylindrical mandrel) DIN EN ISO Paints and varnishes - Cupping test (withdrawn Standard) DIN EN ISO Paints and varnishes - Cupping test DIN EN ISO Paints and varnishes - Cross-cut test (withdrawn Standard) DIN EN ISO Paints and varnishes - Cross-cut test DIN EN ISO Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter DIN EN ISO Paints and varnishes - Buchholz indentation test RAL-GZ Applicable test guideline Clause Cleaning and protection - Fa^ade and monument - Quality assurance ASTM D Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact) BS 6161 Part Methods of test for anodic oxidation coatings on aluminium and its alloys. Determination ofsurface abrasion resistance GSBAL631 Part VII Clause 10 International high-class directive for the component coating of aluminium - behaviour compared with drilling and milling -Translation - 3/8
4 Annex to accreditation certiflcate D-PL Clause 2.18 Sawing, milling and drilling / regulation for determining the adhesion strength of an organic coating during mechanical processing 2.2. Mechanical properties in media mechanical testing of properties GSB ST 663 Part VII Clause 8.2 Crosslinking test / polymerization test / wiping test International quality guideline for component coatings made of steel GSBAL631 Part VII Clause 8.2 Cross-linking test / Polymerization lest / Wiping test International quality guideline for component coatings made of aluminium QIB Clause2.10 Cross-linking test - Test for the determination of the degree of curing of liquid paints Clause2.14 Cross-linkingtest GSBAL631 PartVIICIauselS Resistance to boiling water / Cooking test International quality guideline for the component coating made of aluminium QIB Clause 2.12 Cooking test to check the pre-treatment Clause2.16 Resistance to boiling water / cooking test Period ofvalidity: OS to Dateofissue: Translation - 4/8
5 Annex to accreditation certificate D-PL [( Testing of optical properties /colour fastness DI N Colorimetry - Part 4: CIE 1976 L*a*b* Colour space DINEN ISO Reflectometer äs a means for gloss assessment of plane surfaces of paint coatings and plastics DINEN ISO Paints and varnishes - Determination of specular gloss of nonmetallic paint films at 20, 60 and 85" (withdrawn Standard) ISO Paints and varnishes; Colorimetry; Part 2 : Colour measurement (withdrawn Standard) 2.3. Testing of media resistance due to aging, climatic and environmental impact äs well äs other contamination factors on laminated aluminium and steel and galvanic coatings DINEN ISO Paints and varnishes - Determination of resistance to humidity Part 2: Procedure for exposing test specimens in condensationwateratmospheres DIN Condensation water test atmospheres (withdrawn Standard) DINEN ISO Corrosion tests in artificial atmospheres - Salt spray tests DIN Spray tests with different sodium chloride solutions (withdrawn Standard) DIN EN ISO Metallic and other non-organic coatings - Sulphur dioxide test with general condensation of moisture DINEN ISO Paints and varnishes - Determination of resistance to humid atmospheres containing sulphur dioxide DIN Testing in a saturated atmosphere in the presence ofsulphur dioxide DIN EN ISO Paints and varnishes - Determination of resistance to neutral salt spray (fog) (withdrawn Standard) -Translation- 5/8
6 Annex to accred itation certificate D-PL <^ RAL-GZ Applicable test guideline Clause Cleaning of metal facades- alternative immersion test (Testing of cleaning agents for cleaning metal facades) RAL-GZ Applicable test guideline Clause Cleaning of metal facades - cotton ball test (Testing of cleaning agents for cleaning metal facades) RAL-GZ Applicable test guideline Clause Cleaning of metal facades - immersion test (Testing of cleaning agents for cleaning metal facades) GSBAL631 PartVIICIauselS International quality guideline for component coating made of aluminium - resistance to mortar GSB ST 663 PartVIICIauselS QIB Clause2.11 International quality guideline for component coatings made of steel - resistance to mortar Resistance to mortar Clause 2.15 Resistance to mortar DIN EN ISO 105-B DIN EN ISO QIB Clause2.9 Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps Machu test (short-term corrosion test for aluminium, steel and galvanized steel) Clause2.11 Machu test (short-term corrosion lest, only on profile pieces) -Translation - 6/8
7 Annex to accreditation certificate D-PL ^=^ Akkredltierungsstelle DINEN ISO ISO Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance Anodizing of aluminium and its alloys - Assessment of quality of sealed anodic oxidation coatings by measurement of admittance Caterpillar Specifications 1E2732 ( ) 1E4093 ( ) Laboratory Cyclic Corrosion Test according to SÄE J 2334 ( ) - resistance against fluids (MG ) 3. Testing of performance properties of coatings or metallic, plastic surfaces with selected non-destructive testing ISO Metallic coatings - Measurement of coating thickness - Coulometric method by anodic dissolution Hausmethode Materialography - General Joint Preparation / Coating Thickness Determination DINEN ISO DIN EN ISO Hausmethode Non-magnetic coatings an magnetic Substrates - Measurement of coating thickness - Magnetic method (withdrawn Standard) Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitudesensitive eddy current method Conductance measurement: The process is used to differentiate aluminium alloys by different conductivities Abbreviations used: ASTM American SocietyforTesting and Materials BS British Standard Caterpillar Published test guidance on coatings of U.S. American Company Caterpillar Inc. Specifications Manufacturerofconstruction machinery DIN German Institut ofstandardisation EN European Standard ISO International Organization for Standardization GSB ST Quality community of coatings of steel structural elements Quality community of organic coatings of aluminium structural elements in Architecture Dateofissue: Translation - 7/8
8 Annex to accreditation certificate D-PL / QIB Quality communitv Industrial coating Hausmethode In-house test method of ifo - Institut für Oberflächentechnik GmbH RAL-GZ RAL-QualityLabel SÄE Standard from ANSI - American National Standards Institute -Translation - 8/8
QUALANOD SPECIFICATIONS UPDATE SHEET Nº 1 Edition page 1/5 REVISED APPENDIX VII LIST OF RELEVANT STANDARDS
page 1/5 REVISED APPENDIX VII LIST OF RELEVANT STANDARDS Proposal: R. Furneaux QUALANOD resolution: Input by e-mail, 13.09.2010 - including the new ISO standards (replacing the EN 12373 series) - not refer
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Q-LAB DEUTSCHLAND GMBH In den Hallen 30 66115 Saarbrücken, Germany Markus Weyland Phone: +49 681 857470 Email: mweyland@q-lab.com Website: www.q-lab.com MECHANICAL
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Q-LAB DEUTSCHLAND GMBH In den Hallen 30 66115 Saarbrücken, Germany Markus Weyland Phone: +49 681 857470 Email: mweyland@q-lab.com Website: www.q-lab.com MECHANICAL
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18716-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.11.2014 to 13.05.2018 Holder of certificate: Institut
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ATLAS WEATHERING SERVICES GROUP 1500 Bishop Court Mt. Prospect, IL 60056 Lorenzo Tyler Phone: 305 245 3659 Fax: 773-327-5787 MECHANICAL Valid To: May 31, 2018
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that University of Dayton Research Institute Coatings,
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13438:2005 Paints and varnishes - Powder organic coatings for galvanized or sherardised steel products for construction purposes Paints and varnishes - Powder organic coatings for
More informationInspection Report. IGP Pulvertechnik AG Industrie Stelz, Ringstraße Wil Schweiz. Job number: Samples receipt:
Inspection Report Referred to: AAMA 2604-13, Voluntary Specification, Performance Requirements and Test Procedures for High Performance Organic Coatings on Aluminium Extrusions and Panels Coating name:
More informationInternational Quality Regulations For The Coating of Building Components
International Quality Regulations For The Coating of Building Components Aluminium GSB AL 631 Edition April 2017 Effective: 11.12.2017 Editor: GSB International e. V. Am Bonneshof 5 D-40474 Düsseldorf
More informationISO 7599 INTERNATIONAL STANDARD. Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium
INTERNATIONAL STANDARD ISO 7599 Second edition 2010-07-01 Anodizing of aluminium and its alloys General specifications for anodic oxidation coatings on aluminium Anodisation de l'aluminium et de ses alliages
More informationDrylac Product data sheet
Drylac Product data sheet SERIES 59 weather RESISTaNT A POWDER COATING FOR EXTERIOR APPLICATION (NON-ARCHITECTURAL APPLICATION) BASED ON POLYESTER Typical application ACE (agricultural and construction
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18053-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 02.08.2018 to 26.07.2022 Holder of certificate: F
More informationQUALICOAT SPECIFICATIONS UPDATE SHEET No th Edition Page 1/15. Chapter 4 Approval of coatings
Page 1/15 Subject: Proposal: CLASS 3 POWDERS and SAMPLING OF POWDERS POWDERS Working Group QUALICOAT resolution: Meeting in November 2006 (ratified on 21 June 2007) Date of application: July 2007 Chapter
More informationChapter 7 APPROVAL OF COATINGS
Chapter 7 APPROVAL OF COATINGS 7.1 Terminology of the process steps In the following figure, the definition of the several preparations and layers is visual: The substrate is always STEEL Before the eventual
More informationAS AS Australian Standard. Metal finishing Thermoset powder coatings
AS 4506 2005 AS 4506 2005 Australian Standard Metal finishing Thermoset powder coatings This Australian Standard was prepared by Committee MT-009, Metal Finishing. It was approved on behalf of the Council
More informationSULPHURIC ACID ANODIZING KJ ATTACHMENT NO. 2 TO KJ-06
KJ 06.02 ATTACHMENT NO. 2 TO KJ-06 KJ-06.02 translated by: Justyna Kilian; Date: 02/22/2017 Compiled by: Małgorzata Groele Dział Techniczny DTT-8 Approved by: Dariusz Nykiel Process Engineering Office
More informationApproval of Powder Coatings Quick Guide
1. Definitions 2. Powder system for approval versus Corrosivity Class achievable The powder supplier can only request an approval for a Coating System Type defined in the table below. (yellow fieds) He
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche kkreditierungsstelle GmbH nnex to the ccreditation Certificate D-PL-14564-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 07.04.2016 to 06.04.2021 Holder of certificate: totech
More informationCorrosion tests in artificial atmospheres
www.chinesestandard.net --> Buy GB/T True-PDF 10125-2012 --> Auto-delivered in 0~10 minutes. Translated English of Chinese Standard: GB/T10125-2012 Sales@ChineseStandard.net ICS 25.220.40 A 29 NATIONAL
More informationOptimised coating solution
Optimised coating solution Jotun Facade Optimised coating solution Powder Coatings Architectural QUICK FACTS: Jotun Facade Colours: 220* Finishes: 4 Warranty: 10 Years** For Buildings People Remember At
More informationOXYPLAST BELGIUM N.V./S.A. OXYPLAST POLYESTER POWDER COATING PE50
OXYPLAST BELGIUM N.V./S.A. Hulsdonk 35, B-9042 Gent-Mendonk, Belgium Phone +32 (0)9 326 79 20 - Telefax +32 (0)9 337 01 59 E-mail: info@oxyplast.be - Website: http://www.oxyplast.com OXYPLAST POLYESTER
More informationFriendly on design. Tough on protection.
Friendly on design. Tough on protection. Jotun Super Durable Friendly on design. Tough on protection. Powder Coatings Architectural For Buildings People Remember QUICK FACTS: Jotun Super Durable Colours:
More information13 th Edition
QUALICOAT SPECIFICATIONS List of current update sheets UPDATE SHEET (No.) DATE OF APPLICATION DELTA E Limits (Appendix A7) PERMANENT 1 LIST OF STANDARDS (Appendix A9) PERMANENT 1 1. WET ADHESION TEST 1
More informationCOMMON STANDARDS IN THE PAINT AND COATING INDUSTRY AND ASSOCIATED INSTRUMENTS
COMMON STANDARDS IN THE PAINT AND COATING INDUSTRY AND ASSOCIATED INSTRUMENTS Standard Title Product Sector ACI ACI 318 Rebar Locators & Concrete Covermeters - ACI 503-1 Covermeters Adhesion ACI 503-2
More informationAgenda ISO Corrosion Protection Of steel Structures
Introduction to Control Corrosion in line with ISO 12944 latest edition 2018 Agenda ISO 12944 Corrosion Protection Of steel Structures Introduction to Jotun Cost Of Corrosion Corrosion mechanism Introduction
More informationTEST PROCEDURE SUMMARY
TEST PROCEDURE SUMMARY 1. Compressive Strength - ASTM D695 The compressive strength of a product is determined by subjecting a solid cylinder of material whose length is equal to twice its diameter to
More informationISO 9227 INTERNATIONAL STANDARD. Corrosion tests in artificial atmospheres Salt spray tests
INTERNATIONAL STANDARD ISO 9227 Second edition 2006-07-15 Corrosion tests in artificial atmospheres Salt spray tests Essais de corrosion en atmosphères artificielles Essais aux brouillards salins Reference
More informationFriendly on design. Tough on protection.
Friendly on design. Tough on protection. Jotun Super Durable Friendly on design. Tough on protection. Powder Coatings Architectural THE FREEDOM OF DESIGN Jotun Super Durable offers multiple colours, gloss
More informationOptimised coating solution
Optimised coating solution Jotun Facade Optimised coating solution Powder Coatings Architectural CHOICES FOR THE FINAL TOUCH Jotun Facade offers a wide range of finishes so you can select one that best
More informationP R O D U C T D E S C R I P T I O N
Product : SIGNICOLOR Page: 1/7 This product description is valid for coil coating aluminium sheets for the manufacturing of signs, e.g. advertising signs. 1. Metal Substrate 1.1 Alloy and Temper Mechanical
More informationPOWDER COATINGS- GENERAL SPECIFICATIONS
THOMAS HOWSE LIMITED PRODUCT SPECIFICATION SHEET Tel: 1215591451 Website: www.howsepaints.co.uk POWDER COATINGS- GENERAL SPECIFICATIONS TYPES POLYESTER Thermosetting resins giving hard durable protective
More informationSpecifications for the QUALANOD Quality Label for Sulfuric Acid-Based Anodizing of Aluminium
Specifications for the QUALANOD Quality Label for Sulfuric Acid-Based Anodizing of Aluminium Edition 01.01.2017 Updated 21.11.2017; effective from 1 January 2018 This edition supersedes the previous edition
More informationASTM Volume 02.05, May 2017 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products
1 B136-84(2013) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum 2 B137-95(2014) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated
More informationThermal spraying Zinc, aluminium and their alloys. Part 1: Design considerations and quality requirements for corrosion protection systems
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 2063-1 First edition 2017-09 Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion
More informationNational Standard of the People's Republic of China
ICS 77.150.10 H 61 National Standard of the People's Republic of China GB5237.3-200X Replaces GB 5237.3-2004 Wrought aluminium alloy extruded profiles for architecture Part 3: Electrophoretic coating profiles
More informationWHAT IS INDUSTRIAL PAINT?
WHAT IS INDUSTRIAL PAINT? BASIC CONCEPTS (see also Paint Systems) Preparation is very important to get a good result. A badly prepared surface painted with a high quality paint has normally worse results
More informationHar-Conn Chrome Co. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Har-Conn Chrome Co 603 New Park Ave 06110 United States This certificate demonstrates conformance and recognition
More informationProduct Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90701) Typical applications. Features. Finish and Colour. TIGER Shield
Product Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90701) Epoxy zinc-rich powder coating primer. Part of a two-coat TIGER Shield system. Designed to impart superior corrosion protection to steel
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11325-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 23.01.2017 to 22.01.2022 Holder of certificate: INDUSTRIE-LABOR
More informationDNVGL-CP-0086 Edition March 2016
CLASS PROGRAMME Type approval DNVGL-CP-0086 Edition March 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationPrevention Strategies Design and Coatings
Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique
More informationBarry Avenue Plating Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Barry Avenue Plating Inc 2210 Barry Ave 90064 United States This certificate demonstrates conformance and recognition
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18478-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 01.09.2014 to 31.01.2018 Holder of certificate: MT
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationResicoat R4-FB for Fluidized Bed Application on Preheated Surfaces Code: HKC71R
Product Datasheet Resicoat R4-FB for Fluidized Bed Application on Preheated Surfaces Code: HKC71R Product Description Product Features Resicoat R4 is a high quality thermosetting epoxy powder coating for
More informationMagnetic Inspection Laboratory Inc. Chemical Processing
This certificate is granted and awarded by the authority of the Nadcap Management Council to: Magnetic Inspection Laboratory Inc. 1401 Greenleaf Avenue Elk Grove Village, IL 60007-5522 United States This
More informationValspar InspireME Coil and Extrusion Product Guide Specification Section Shop-Applied Coatings for Metal
When you re looking for inspiration you have a new source. valsparinspireme.com is an online experience brimming with ideas and possibilities to fuel your creativity. Valspar InspireME Coil and Extrusion
More informationNylofor Swing Gate. Figure 1: Single Nylofor Swing Gate
1 Scope This specification specifies requirements for swing gates with Nylofor infill. The gate consists of different components: - Gate posts with square fixation strip (hinge post and latch post) - Wing
More informationThin Film Internal Epoxy Coating for Pipelines
Technical and professional requirements TR1114, Version 1.01, Valid from 13.11.2003 Validity area: Classification: Open Contents 1 Introduction...3 1.1 Objective...3 1.2 Warrant...3 1.3 Publication and
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 62561-2 Edition 1.0 2012-02 Lightning protection system components (LPSC) Part 2: Requirements for conductors and earth electrodes INTERNATIONAL ELECTROTECHNICAL COMMISSION PRICE
More informationAustralian Standard. Metal finishing Thermoset powder coatings for architectural applications of aluminium and aluminium alloys AS AS 3715
AS 3715 2002 AS 3715 Australian Standard Metal finishing Thermoset powder coatings for architectural applications of aluminium and aluminium alloys This Australian Standard was prepared by Committee MT-009,
More informationProduct Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90500) Typical applications. Features. Finish and Color. TIGER Shield
Product Data Sheet SERIES 69 - DRYZINC ZINC-RICH PRIMER (69/90500) Epoxy zinc-rich powder coating primer. Part of a two-coat TIGER Shield system. Designed to impart superior corrosion protection to steel
More informationInternational Quality Regulations For The Coating of Building Components
International Quality Regulations For The Coating of Building Components Steel and Galvanized Steel Edition April 2017 Effective: 11.12.2017 Editor: GSB International e. V. Am Bonneshof 5 D-40474 Düsseldorf
More informationOVERVIEW OF CORROSION PROTECTION ALLOY MP-ACQ FASTENER COATING SYSTEM FOR USE IN ACQ-PRESSURE TREATED LUMBER
OVERVIEW OF CORROSION PROTECTION ALLOY MP-ACQ FASTENER COATING SYSTEM FOR USE IN ACQ-PRESSURE TREATED LUMBER Arnold Satow, President Satow Global Technologies, LLC Corrosion is the electrochemical reaction
More informationInternational Quality Regulations For The Coating of Building Components GSB AL 631 GSB ST 663
International Quality Regulations For The Coating of Building Components Aluminium Steel and Galvanized Steel GSB AL 631 Edition May 2015 Effektive: 10.03.2016 Editor: GSB International e. V. Am Bonneshof
More informationCUP - Sealed blind rivet
made of stainless steel A2 AISI 304 or made of stainless steel A4 AISI 316 with mandrel made of stainless steel Maximum corrosion protection! Survey on CUP sealed blind rivet of stainless steel Increasing
More informationThis document is a preview generated by EVS
TECHNICAL REPORT ISO/TR 16689 First edition 2012-05-01 Anodizing of aluminium and its alloys Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid/chromic
More informationDraft Sri Lanka Standard SPECIFICATION FOR ALUMINIUM/ZINC ALLOY COATED STEEL SHEETS FOR ROOFING AND CLADDING
Draft Sri Lanka Standard SPECIFICATION FOR ALUMINIUM/ZINC ALLOY COATED STEEL SHEETS FOR ROOFING AND CLADDING SLS. : 2018 Gr. Copyright Reserved SRI LANKA STANDARDS INSTITUTION No. 17, Victoria Place, Elvitigala
More informationSapa Surface Treatments. Anodising, powder coating and Decoral
Sapa Surface Treatments Anodising, powder coating and Decoral Anodising Anodising is the strongest surface finish available for aluminium profiles. This is an electrolytic process that builds up the surface
More informationPAINT, COATING AND POLYMER TESTING. SINCE 1999 Our business : Providing Results and Value ISO Accredited
PAINT, COATING AND POLYMER TESTING SINCE 1999 Our business : Providing Results and Value ISO 17025 Accredited Micom Laboratories Inc. is established in Dorval, Quebec, since 1999. Micom offers a complete
More informationJSCE-K Test methods for weathering resistance of. concrete surface coating materials
JSCE-K 511-2007 Test methods for weathering resistance of concrete surface coating materials JSCE-K 511-2007 Test methods for weathering resistance of concrete surface coating materials 1. Scope This JSCE
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18064-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 04.12. to 03.12.2022 Holder of certificate: Buderus
More informationWEATHERING AND CORROSION TESTING IN THE AUTOMOTIVE INDUSTRY: AN OVERVIEW OF TODAY S REQUIREMENTS. Andy Francis, Q-Lab Corporation
WEATHERING AND CORROSION TESTING IN THE AUTOMOTIVE INDUSTRY: AN OVERVIEW OF TODAY S REQUIREMENTS Andy Francis, Q-Lab Corporation 17M-0479 1 Weathering and Corrosion Weathering (Atmospheric) Corrosion Changes
More informationThis is to certify that All Metals Processing of Orange County, LLC 8401 Standustrial Street Stanton, CA USA
This is to certify that 8401 Standustrial Street Stanton, CA 90680 USA is registered as a Single Site quality management system in conformance with ISO 9001:2008 and AS9100C The audit was conducted in
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11278-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 12.05.2016 to 11.05.2021 Holder of certificate: Salzgitter
More information13 th Edition
QUALICOAT SPECIFICATIONS List of current update sheets 13 th Edition 12.12.13 UPDATE SHEET (No.) DATE OF APPLICATION DELTA E Limits (Appendix A7) PERMANENT 1 LIST OF STANDARDS (Appendix A9) PERMANENT 1
More informationCoating Specifications
Quadax Series Butterfly Valves Version May 2011 müller co-ax ag Gottfried-Müller-Str. 1 74670 Forchtenberg Germany Tel. +49 7947 828-0 Fax +49 7947 828-11 E-Mail info@co-ax.com Internet www.co-ax.com Table
More informationAluminium and aluminium alloys. Castings. Chemical composition and mechanical
BSI titles relevant to the cast metals industry (as at 20/5/9) BSI Title International Equiv Aluminium and aluminium alloys. Castings. Chemical composition and mechanical where known 94/713477DC properties
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19221-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.04.2017 to 19.05.2019 Holder of certificate: DEKRA
More informationNCI for Industrial Applications. Restore Highly Oxidized & Colors. Extend Freshly Painted or Existing Paint by 10+ Years
NCI for Industrial Applications Restore Highly Oxidized & Colors Du Extend Freshly Painted or Existing Paint by 10+ Years Industrial Market Before After with NCI Industrial asset owners commonly apply
More informationCoating Thickness Meter Data Sheet / Instructions
Paint Test Equipment Coating Thickness Meter Data Sheet / Instructions Information The Paint Test Equipment Coating Thickness Meter easily measures all coatings on metallic substrates using the magnetic
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Midwest Testing Laboratories, Inc. 1072 Wheaton
More informationSPECIFICATIONS FOR A QUALITY LABEL FOR LIQUID AND POWDER ORGANIC COATINGS ON ALUMINIUM FOR ARCHITECTURAL APPLICATIONS
SPECIFICATIONS FOR A QUALITY LABEL FOR LIQUID AND POWDER ORGANIC COATINGS ON ALUMINIUM FOR ARCHITECTURAL APPLICATIONS 14 th Edition Master version approved by the QUALICOAT Executive Committee on 6 November
More informationOpen to bring alive in technicolour
Open to bring alive in technicolour with Essar Steel Colour Coated Sheets Essar Steel Colour Coated Sheets Simplified production. Durability in harsh conditions. Choice and convenience. These are some
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-19890-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.11.2016 to 14.04.2020 Holder of certificate: Aktien-Gesellschaft
More informationProduct Data Sheet. Suitable for electrostatic spray Specific gravity g/cm³ Storage
Product Data Sheet AL113D Product Description Interpon BPP 330 is a barrier protective powder primer that is designed to give enhanced corrosion protection of mild steel and hot dip galvanized steel. Interpon
More informationISO INTERNATIONAL STANDARD. Safety colours and safety signs Classification, performance and durability of safety signs
INTERNATIONAL STANDARD ISO 17398 First edition 2004-08-15 Safety colours and safety signs Classification, performance and durability of safety signs Couleurs de sécurité et signaux de sécurité Classification,
More informationLUX Specifications. Section S - Preformed Steel Siding
Part 1 General.1 System-1: Installation over building paper or air barrier membrane, on exterior grade gypsum board or exterior grade wood sheathing. 1.2 RELATED SECTIONS.1 Section 01 11 00 Summary of
More informationISO INTERNATIONAL STANDARD. Thermal spraying Characterization and testing of thermally sprayed coatings
INTERNATIONAL STANDARD ISO 14923 First edition 2003-07-01 Thermal spraying Characterization and testing of thermally sprayed coatings Projection thermique Caractérisation et essais des revêtements obtenus
More informationAccelerated Performance Evaluation of Railcar Coatings: A State of the Art Update
Accelerated Performance Evaluation of Railcar Coatings: A State of the Art Update Brian Skerry The Sherwin-Williams Company October 4 th, 2016 Omaha, Nebraska RSI/CMA 2016 1 Testing Paints Fitness for
More informationinformative Article By Dr. Santosh Gupte
SURFACE PREPARATION, PAINTING- COATING TO PREVENT CORRORSION IN OIL & GAS informative Article By Dr. Santosh Gupte Overview: In recent years the importance of surface finish- roughness, painting- coating
More informationSURFACE PREPARATION BEFORE PAINTING
SURFACE PREPARATION: For any given paint system, surface preparation is the single important factor which would determine its performance. Various surface preparation methods are adopted depending on the
More informationMoisture curing paint systems. (Moisture Curing Urethanes) MCU
Moisture curing paint systems (Moisture Curing Urethanes) MCU Moisture curing paint systems (Moisture Curing Urethanes) MCU What are moisture curing paint systems or MCU s? One pack systems have the advantage
More informationAS/NZS 2728:2013. Prefinished/prepainted sheet metal products for interior/exterior building applications Performance requirements AS/NZS 2728:2013
AS/NZS 2728:2013 Australian/New Zealand Standard Prefinished/prepainted sheet metal products for interior/exterior building applications Performance requirements Superseding AS/NZS 2728:2007 AS/NZS 2728:2013
More informationSEALER 700 W. SEALER 700 W is a water dilutable, inorganic sealing system based on silicon.
SEALER 700 W PHYSICAL PROPERTIES: Clear, colourless, ph neutral liquid DESCRIPTION: SEALER 700 W is a water dilutable, inorganic sealing system based on silicon. SEALER 700 W contains no chromates in the
More informationApplied Materials. The Power of Trust. The Future of Energy.
Applied The Power of Trust. The Future of Energy. Applied EXTENDING EQUIPMENT LIFE Fluorescent magnetic particle inspection Assessment of fracture features by scanning electron microscopy Failure analysis,
More informationComparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited PIONEER LABORATORY Doha, Qatar for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized
More informationSpecial Coatings Special Materials
Special Coatings Special Materials Foreword Special coatings Special materials In order that standard components can function for long periods, without maintenance and reliably even under extreme operating
More informationPRESS RELEASE
PRESS RELEASE 14-01-53 dated 15 January 2014 Vacuum Insulation Panels (VIP) stress test Research report demonstrates the suitability of use of Since the subjects of energy conservation and reducing CO
More informationBinding protection at different levels
Binding protection at different levels Primax The core of protection Powder Coatings Keeping corrosion away The use of steel is increasing in many industries due to the numerous and flexible design options
More informationPaper presented at First International Symposium on Environmental Testing Engineering November 2007 Royal Military Academy, Brussels, Belgium
Paper presented at First International Symposium on Environmental Testing Engineering 22-24 November 2007 Royal Military Academy, Brussels, Belgium Accelerated corrosion testing for product qualification
More informationAustralian Standard. Self-drilling screws for the building and construction industries. Part 2: Corrosion resistance requirements AS 3566.
AS 3566.2 Australian Standard Self-drilling screws for the building and construction industries Part 2: Corrosion resistance requirements This Australian Standard was prepared by Committee ME-029, Fasteners.
More informationChromium (VI)-free surface technology for hydraulic fittings
Chromium (VI)-free surface for hydraulic fittings VOSS Fluid GmbH for hydraulic fittings 01.11.2006 Page 1 F-GM / Sl X Structure of the A3C surface (with hexavalent chromium) Zinc coating applied by electroplating
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11299-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.10.2016 to 16.10.2021 Holder of certificate: Salzgitter
More informationProposal for amendments to Regulation No. 110 (CNG and LNG vehicles) Submitted by the expert from the International Organization for Standardization
Submitted by the expert from ISO Informal document GRSG-113-38 (113 th GRSG, 10-13 October 2017 agenda item 6.(b)) Proposal for amendments to Regulation No. 110 (CNG and LNG vehicles) Submitted by the
More informationMosaic 100gr/m 2 /layer 125gr/m 2 /layer Ceramic Tiles 100gr/m 2 /layer 125gr/m 2 /layer Cementitious high porosity. Gloss 75Α:25Β
Product Description Neopox Special is a two-component solvent-based epoxy paint suitable for use on construction, metallic & GRP surfaces that undergo significant mechanical stress and need chemical resistance.
More informationJanuary Last date for receipt of comments is
FOR BIS USE ONLY DOC:CHD 20(2031)C January 2013 BUREAU OF INDIAN STANDARDS Draft Indian Standard POWDER COATINGS SPECIFICATION (first revision of IS 13871) (Not to be reproduced without the permission
More informationASTM D256 Standard test methods for determining the izod pendulum impact resistance of plastics
IAS Accreditation Number Company Name Address Contact Name Telephone +91-80-40697707 Effective Date of Scope November 15, 2018 Accreditation Standard ISO/IEC 17025:2005 TL-385 Bangalore Research & Development
More informationANSI-ASQ National Accreditation Board/ACLASS
ANSI-ASQ National Accreditation Board/ACLASS SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 Midwest Testing Laboratories, INC 1072 Wheaton Street, Troy, MI 48083 Cherie Ulatowski Phone: 248-689-9262 info@midwesttesting.com
More information