IMS INSTITUTE PROVIDER PROGRAMME FOR 2018
|
|
- Adelia Hoover
- 6 years ago
- Views:
Transcription
1 () PIO TIZ/fm PIO KER/f Type of PT activity domain Period of implementation : testing/ EN 822 EN 825 EN 13, Methods A & thermal C in buildings EN 14 ceramic tiles EN 826 EN 15 length, width, thickness, squareness and flatness compression behaviour dimensional stability under laboratory dimensional stability under specified deformation under specified compressive load & temperature dea EN bending behaviour linear thermal expansion * only for particular sequential s
2 () PIO CEM/h PIO OTP/h PIO BIT/f PIO BUK/a Type of PT activity domain Period of implementation : testing/ (sequential cement CRM solid waist (flying ash) solid waist based on flying ash from eluate bitumen environment noise level (indoors) EN a. 4 EN a. 5 EN dea wet chemistry 150 chemical analyses XRF spectroscopy 150 chemical analyses Al, As, Ba, Cd, Ca, Cr, Cu, Fe, Pb, Mg, Mn, Se, Ni, K, Ag, 5 20 Na, V, Zn Al, Sb, As, Ba, Be, Bi, B, Cd, Ca, Cr, Co, Cu, Ga, In, Fe, Pb, Li, Mg, Mn, Mo, Ni, P, K, 3 10 Se, Si, Ag, Na, Sr, S, Sn, Ti, W, V, Zn, Zr EN density EN 1426 needle penetration EN 1427 softening point ISO , 2 frequency analysis on third frequency band (50 Hz 10 khz) to to * only for particular sequential s
3 () PIO KAG/fm PIO ZIZ/a PIO CEM/fm 02/18 Type of PT activity domain Period of implementation : testing/ (sequential * only for particular sequential s stone aggregate 0 16 mm field measureme nt of sound cement EN EN ISO ISO SRPS B.C8.023 shape index resistance to wear (micro-deval) airborne sound impact sound bulk density dea to to weight of prism 30 flexural strength (after EN , 7 & 28 days) 120 compressive strength (after 2, 7 & 28 days) 120 standard consistency water content EN determination of setting times determination of soundness 30 sieving method ( EN t.3 and 45 µm) 30 EN t.4 air permeability
4 () PIO PPZ/p PIO PIV/fm PIO VPS/f Type of PT activity domain Period of implementation : testing/ mineral wool wood based panels (uncoated panels) air permeability of buildings dea Blaine method EN heat of hidratation EN heat of hidratation 1182 non-combustibility test EN 311 surface soundness EN 317 swelling in thickness after immersion in water tensile strength EN 319 perpendicular to plane of board EN 321 moisture resistance 120 EN formaldehyde content 250 number of air changes by fan 15. to 15. to pressurization method * only for particular sequential s
5 () PIO OPC/f PIO KAG/f 02/18 Type of PT activity domain Period of implementation : testing/ formatted split sample clay pavers natural stone aggregate 4 16 mm EN 1344, Annex C EN freeze/thaw resistance particle size distribution - sieving method dea * only for particular sequential s
PT PROVIDER IMS INSTITUTE REGISTER OF ISSUED REPORTS
PT PROVIDER IMS INSTITUTE REGISTER OF ISSUED REPORTS 1. 2. BUK/a 01/15 CEM/fhm 01/15 environmental noise level (outdoors) cement CEM I 42,5 R ISO 1996-2 EN 196-1 EN 196-2, t. 4 EN 196-2, t. 5 EN 196-3
More informationPT PROVIDER IMS INSTITUTE REGISTER OF ISSUED REPORTS
PT PROVIDER IMS INSTITUTE REGISTER OF ISSUED REPORTS 1. 2. BUK/a CEM/fhm environmental noise level (outdoors) cement CEM I 42,5 R ISO 19962 EN 1961 EN 1962, t. 4 EN 1962, t. 5 EN 1963 EN 1966, t. 3 EN
More informationRaicon Labs Pvt. Ltd., Plot No. 140, HSIIDC, Rai Industrial Area, Sonepat, Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 9 I. BUILDING MATERIALS 1. Cement Fineness by Blain Air Permeability IS 4031 (Part 2): 1999 (RA 2013) 100 m 2/ kg to 500 m 2/ kg Consistency IS 4031 (Part 4): 1988 (RA 2014)
More informationAccepted time needed. Quantity needed. 1 Analysis of clay, additives and solutions. General: Sample preparation and removal contribution (per sample)
1 Analysis of clay, additives and solutions General: Sample preparation and removal contribution (per sample) 1.1. Physical analyses 1.1.1. Moisture content and/or density TCKI method 3 weekdays 150 g
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 19 Wildmere Road Banbury Oxfordshire OX16 3JU Contact: Mr J Guntrip Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail: qualityuk@wmtr.com
More informationDiscipline Mechanical Testing Issue Date Certificate Number T-2522 Valid Until Last Amended on - Page 1 of 13
Bureau Veritas (India) Pvt. Ltd. - Construction Services, Last Amended on - Page 1 of 13 I. MECHANICAL PROPERTIES OF MATERIALS 1. Steel Reinforcement Weight/meter IS 1786: 2008 (RA 2013) 0.1 kg to 20 kg
More informationNational Test House (N.W.R.), E-763, Road No. 9F-1, VKI Area, Jaipur, Rajasthan. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 12 I. MECHANICAL PROPERTIES OF MATERIALS 1. Ferrous & Non Ferrous Tensile Test Tensile strength/breaking strength/load Proof load % Elongation % Reduction in Area Yield Stress
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WESTMORELAND MECHANICAL TESTING & RESEARCH, INC. 221 Westmoreland Drive Youngstown, PA 15696 Michael Self Phone: 724 537 3131 E-mail: mself@wmtr.com CHEMICAL
More information- Particulate matter (PM10, 2.5, 1) -Coarse region (2.5µm < dp <10µm)
- Particulate matter (PM10, 2.5, 1) The Suspension of fine solids particles or liquid droplets or mixture of them in the gas or liquid -Coarse region (2.5µm < dp
More informationLi Mass = 7 amu Melting point C Density 0.53 g/cm 3 Color: silvery
Blackline Master B02: Mendeleev s Element Cards H Mass = 1 amu Melting point -259 0 C Density 0.0909 g/cm 3 Color: colorless Li Mass = 7 amu Melting point 180.5 0 C Density 0.53 g/cm 3 Be Mass = 9 amu
More informationExporter: SEISHIN Trading Co., Ltd.
Exporter: SEISHIN Trading Co., Ltd. Reference materials 2009/8/1 Seishin Trading Co., Ltd. (Manufacturer: Japan Society for Analytical Chemistry) Environment (Plastics) CRM 0601-3 (chips) Plastics (polyester)
More informationExporter: SEISHIN Trading Co., Ltd.
Exporter: SEISHIN Trading Co., Ltd. Reference materials December 21, 2015 Seishin Trading Co., Ltd. (Manufacturer: Japan Society for Analytical Chemistry) Environment (Plastics) CRM 0601-3 (chips) Plastics
More informationAccepted time needed. Quantity needed. 1 Analysis of clay, additives and solutions. General: Sample preparation and removal contribution (per sample)
time 1 Analysis of clay, additives and solutions General: Sample preparation and removal contribution (per sample) 1.1. Physical analyses 1.1.1. Moisture content and/or density TCKI method 3 weekdays 150
More informationXRF DRIFT MONITORS DATA CALIBRATION MATERIAL
UNIQUE PRODUCTS FROM ONE SOURCE XRF DRIFT MONITORS DATA CALIBRATION MATERIAL KEY FEATURES Monitor Composition The monitors are manufactured as stable fortified glass discs that are used to correct for
More informationLIST OF TESTING SERVICES
Soil 1 In-situ Density by Sand Replacement Method Using Large / Small Pouring Cylinder BS 1377 Part 9 2 In-place Density Test by Sand Cone Method ASTM D 1556 3 In-situ Density Test Using Nuclear Densitometer
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: San Nicolás de los Garza, N.L. 66460 (Hereinafter
More informationExtending the Capability of Portable XRF Smarter, Smaller and Faster GALM 2016
Extending the Capability of Portable XRF Smarter, Smaller and Faster GALM 2016 Chris Calam, Regional Sales Manager, EMEA Portable Analytical Instruments chris.calam@thermofisher.com The world leader in
More informationElvaX ProSpector in Exploration & Mining
ElvaX ProSpector in Exploration & Mining Introduction ElvaX ProSpector is a fast, accurate and easy tool for different mining applications. It provides onsite analysis of ore samples with minimal sample
More informationS-65 BERYLLIUM GRADE. Effective: April 11, SCOPE
S-65 BERYLLIUM GRADE Effective: April 11, 2018 Rev. E 1. SCOPE This specification defines the requirements for a structural grade of hot pressed beryllium block which is designated S-65. This material
More informationCHM101 SECOND EXAM 162. Chemistry 101 SECOND Exam (162) Name: Date: 30/4/2017
Chemistry 101 SECOND Exam (162) Name: Date: 30/4/2017 Student no. Section: Useful Information:Gas Constant R= 0.08206 L.atm/K.mol, Specific heat of H 2 O=4.18 J/g. C 1 atm. = 760 mmhg. H 1 He 2 1.000 4
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationGeotech Services, X-18, MIDC, Hingna, Nagpur, Maharashtra. Discipline Mechanical Testing Issue Date
Last Amended on 11.01.2014 Page 1 of 14 I. BUILDING MATERIALS 1. Soil / Rock Plate Load Test IS 1888 1982 (Reaffirmed-2007) Cyclic Plate Load Test IS 5249 1992 Clause 6 (Reaffirmed-2010) Load Test On In-Situ
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationLIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING. Determination of sulphate content of soil and ground water testing
LIST OF DAC (17025) ACCREDITED TESTS CONSTRUCTION MATERIALS TESTING WATER: Material / Product Description Chemical Water Determination of ph Value 02 Chemical Water Determination of sulphate content of
More informationATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of
A2LA has accredited Brackenridge, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005
More informationCEN/TC 88 - Thermal insulating materials and products
C/TC 88 - Thermal insulating materials and Standard reference CR 245:1986 822:1994 823:1994 824:1994 825:1994 826:1996 1602:1996 1602:1996/AC: 1603:1996 1603:1996/A1: 1603:1996/AC: 1604:1996 1604:1996/A1:
More informationLower Cost Higher Performance Graphite for LIBs. Prepared by: Dr. Edward R. Buiel President and CEO Coulometrics, LLC. Date: March 23, 2017
Lower Cost Higher Performance Graphite for LIBs Prepared by: Dr. Edward R. Buiel President and CEO Coulometrics, LLC. Date: March 23, 2017 Outline Company overview Review of natural graphite resources
More informationUK Baseline Geochemistry: A Key Environmental Yardstick
UK Baseline Geochemistry: A Key Environmental Yardstick Geochemical Baselines and Medical Geology Team Content Geochemical baselines G-BASE project Applications how the data have been used and what can
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 4155 Lisa Drive Tipp City, OH 45371 Craig Riviello Phone: 937 669 4500 MECHANICAL Valid To: December 31, 2017 Certificate Number: 2633.01 In recognition of
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 4155 Lisa Drive Tipp City, OH 45371 Craig Riviello Phone: 937 669 4500 CHEMICAL Valid To: November 30, 2017 Certificate Number: 2633.02 In recognition of the
More informationISL Mining in Kazakhstan and Technology Development Vienna, IAEA, April 2013
ISL Mining in Kazakhstan and Technology Development Vienna, IAEA, 15-18 April 2013 O. Gorbatenko Uranium resources in Kazakhstan Kazakhstan Identified Resources of uranium amount to 900 thousand tons,
More informationLake Victoria Mining Co. Gravity, Flotation and Cyanide Leach Test Work. Prepared for:
Lake Victoria Mining Co. Gravity, Flotation and Cyanide Leach Test Work Prepared for: Dave Kalenuik Lake Victoria Mining Co. #810-675 West Hastings St. Vancouver, BC Canada V6B 1N2 (604) 719-2896 dkalenuik@gmail.com
More informationCenter for By-Products Utilization
Center for By-Products Utilization DRAFT Evaluation of Biron #5 Boiler Ash from Stora Enso North America By Tarun R. Naik and Rudolph N. Kraus REP-500 February 2003 Submitted to Mr. John Michalsen, Stora
More informationApplication of PMF analysis for assessing the intra and inter-city variability of emission source chemical profiles
Application of PMF analysis for assessing the intra and inter-city variability of emission source chemical profiles E. Diapouli, M. Manousakas and K. Eleftheriadis Environmental Radioactivity Laboratory
More information10.6 Schedule of Accreditation
Testing Laboratory is accredited by the GCC Accreditation Center () in accordance with the recognised International Standard, General requirements for the competence of testing and calibration laboratories
More informationSUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
More informationAccepted time needed. Quantity needed. 1 Analysis of clay, additives and solutions. General: Sample preparation and removal contribution (per sample)
time 1 Analysis of clay, additives and solutions General: Sample preparation and removal contribution (per sample) 1.1. Physical analyses 1.1.1. Moisture content and/or density TCKI method 3 weekdays 150
More informationAdvanced Materials Analysis with Micro-XRF for SEM
Advanced Materials Analysis with Micro-XRF for SEM Birgit Hansen, Application Scientist EDS and Micro-XRF for SEM Stephan Boehm, Product Manager Micro-XRF for SEM Bruker Nano GmbH, Berlin, Germany Innovation
More informationGallium Arsenide monocrystalline
Gallium Arsenide CMK manufacture Semi-insulating and Semiconducting Gallium Arsenide wafers and ingots by LEC (Liquid Encapsulated Czochralsky) or VGF (Vertical Gradient Freeze) growth method. Required
More informationEvidence of Performance regarding the requirements for float glass according to EN 572
Evidence of Performance regarding the requirements for float glass according to EN 572 Test Report 605 32401 Client Noval Glass Industrial Group (China) Co., Ltd. Noval Glass Industiral Zone Qingdao, 523965
More informationRadial, Axial or Dual View ICP: Which Do You Choose? Manny Almeida Teledyne Leeman Labs, Inc. Hudson, NH
Radial, Axial or Dual View ICP: Which Do You Choose? Manny Almeida Teledyne Leeman Labs, Inc. Hudson, NH 03031 Manuel.Almeida@Teledyne.com Teledyne Leeman Labs, Inc. US based manufacturer of Elemental
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Metals and Minerals Division 2 Perry Road Witham Essex CM8 3TU Contact: Mrs C Hargreaves Tel: +44 (0)1376 536800 Fax: +44 (0)1376 520819 E-Mail:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Element Materials Technology Sheffield Ltd, Trading as Element ccredited to 3
More informationAPPLICATION OF STAINLESS STEEL SLAG WASTE AS A PARTIAL REPLACEMENT TO MANUFACTURE CEMENT MORTARS
International Conference Industrial Waste & Wastewater Treatment & Valorisation APPLICATION OF STAINLESS STEEL SLAG WASTE AS A PARTIAL REPLACEMENT TO MANUFACTURE CEMENT MORTARS Julia Rosales, University
More informationSorting and Drying Code Price Unit. Sorting and Boxing of Samples, received as pulps SORTBOX 0.00 Sample
Sample Preparation Sorting and Drying Sorting and Boxing of Samples, received as pulps SORTBOX 0.00 Sample Sorting and Drying of Samples, prior to preparation SORTDRY 0.00 Sample Reporting of Sample Weight,
More information5th International Conference on Sustainable Solid Waste Management, Athens, June M. Contreras, M.J. Gázquez, J.P.
5th International Conference on Sustainable Solid Waste Management, Athens, 21 24 June 2017 M. Contreras, M.J. Gázquez, J.P. Bolívar Group of Radiations Physics and Environment (FRYMA) University of Huelva,
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited PIONEER LABORATORY Doha, Qatar for technical competence in the field of Construction Materials Testing This laboratory is accredited in accordance with the recognized
More informationMETAL RECOVERY WITH CH COLLECTOR SOLUTION
METAL RECOVERY WITH CH COLLECTOR SOLUTION CH COLLECTOR SOLUTIONS UNIQUE METAL RECOVERY FROM WATERS, HIGHLY SELECTIVE ON: Basic metals; Antimony, Copper, Lead, Mercury, Nickel and Zinc Rare Earth Elements
More informationChemistry*120* * Name:! Rio*Hondo*College* * * EXAMPLE*EXAM*1*!
Chemistry*120* * Name: EXAMPLE*EXAM*1* Exam)#1 100)points) Directions:)Answereachquestionbelowtothebestofyourability.Showallworkwherecalculations arerequired.aninformationsheetwithaperiodictableisattachedtothebackoftheexam;youmay
More informationSTANDARDISATION OF SRF. Basic information for producers and users of SRF, public authorities and other stakeholders
STANDARDISATION OF SRF Basic information for producers and users of SRF, public authorities and other stakeholders Introduction Since the 1980 s the use of waste as a fuel has been an appealing idea to
More informationTrace elements leaching from cement mixtures containing fly ash. Nadya Teutsch and Olga Berlin Geological Survey of Israel
Trace elements leaching from cement mixtures containing fly ash Nadya Teutsch and Olga Berlin Geological Survey of Israel WEACAU-III: Workshop on Environmental Aspects of Coal Ash Uses 12 December 2012
More informationAppendix C Groundwater Quality
Appendix C Groundwater Quality TABLE GW1.1 TABLE C1 Groundwater Quality Results - Field Parameters Monitoring Sample MSI Sample Field Temp Field ph Field EC 25 Field DO% Field Turbidity Well Date Number
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ssay Office and nchorcert nalytical (trading names of The Guardians of the Standard
More informationE3 Redox: Transferring electrons. Session one of two First hour: Discussion (E1) 2nd and 3rd hour: Lab (E3, Parts 1 and 2A)
E3 Redox: Transferring electrons Session one of two First hour: Discussion (E) 2nd and 3rd hour: Lab (E3, Parts and 2A) Oxidation-Reduction (Redox) Reactions involve electron transfer. Change in charge
More informationChem : Oct. 1 - Oct. 7
Chem. 125-126: Oct. 1 - Oct. 7 Preparation Pre-lab Report (p.90) for E3 completed Discussion Presentation for E2 completed Pre-lab reading and studies for E3 completed Agenda One hour discussion of E2(Questions,
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11299-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.10.2016 to 16.10.2021 Holder of certificate: Salzgitter
More information1997 UBC Standard Test method for compressive strength of masonry prisms
IAS Accreditation Number TL-196 Company Name Address 3310 Airport Way Long Beach, California 90806 Contact Name Steve Crumb Lab Manager Telephone (562) 426-3355 Effective Date of Scope April 20, 2017 Accreditation
More informationX-Ray Fluorescence Lab Report
X-Ray Fluorescence Lab Report Arena Holguin, Sylvia Navidad, Gabriel Gonzalez MME5401/MASE 6390 11/14/11 1. Introduction X-Ray fluorescence (XRF) is a popular, nondestructive analytical method for elemental
More informationCertificate N : C7
Page N : 1/ 7 Job File No.181202/ 71088-0031/M-NK-2015 INSPECTION REPORT In pursuance of an order for inspection given to us BY : " CARBO ONE LIMITED " TO INSPECT : Coal Sample 0-50 mm, grade Washed T-coal
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
This annex is valid from: 16-08-2017 to 01-08-2020 Replaces annex dated: 23-05-2016 Vlamoven 41 6826 TM Arnhem The Netherlands Location(s) where activities are performed under accreditation Head Office
More informationCertificate N : E
Page N : 1/ 6 Job File No.: 181202/65467-1269/M-NK-2015 ANALYTICAL REPORT In pursuance of an order for inspection given to us BY : " CARBO ONE LIMITED " TO ANALYZE : Coal Sample 0-100 mm, grade HV PCI
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationCertificate N : C
Page N : 1/ 7 Job File No.: 181202/65647-1407/M-NK-2015 CERTIFICATE OF SAMPLING AND ANALYSIS In pursuance of an order for inspection given to us BY : " CARBO ONE LIMITED " TO INSPECT : Coal 0-50 mm, grade
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY HOUSTON REGAL ROW 1 9925 Regal Row Houston, TX 77040 Richard Green Phone: 281 848 0270 MECHANICAL Valid To: January 31, 2020 Certificate
More informationEOS Aluminium AlSi10Mg
is an aluminium alloy in fine powder form which has been specially optimised for processing on EOSINT M systems This document provides information and data for parts built using powder (EOS art.-no. 9011-0024)
More informationCERTIFICATE OF ANALYSIS
in cooperation with the WG Aluminium of the Committee of Chemists of GDMB CERTIFICATE OF ANALYSIS ERM -EB312a AlMgSi0,5 Certified value 1) Uncertainty 2) Element Mass fraction in % Si 0.403 0.008 Fe 0.198
More informationCertificate N :
Page N : 1/ 6 Job File No.: 181202/65467-1063/M-NK-2015 INSPECTION REPORT In pursuance of an order for inspection given to us BY : " CARBO ONE LIMITED " TO INSPECT : Coal 25-50 mm, grade Washed SS - coal
More informationCertificate N :
Page N : 1/ 8 Job File No.: 181202/65647-1077/M-NK-2015 INSPECTION REPORT In pursuance of an order for inspection given to us BY : " CARBO ONE LIMITED " TO INSPECT : Coal 0-13 mm, grade MV SS-Coal (as
More informationCertificate N :
Page N : 1/ 6 Job File No.: 181202/65647-1481-1/M-NK-2015 INSPECTION REPORT In pursuance of an order for inspection given to us BY : " CARBO ONE LIMITED " TO INSPECT : Coal 50-200 mm, grade Washed SS -
More informationBottom Ash Data Week 45
Bottom Ash Data 2018 Week 45 The following analytical report was sent to the Ministry of Environment and Climate Change Strategy on November 21, 2018. The data represents bottom ash composite results for
More informationBottom Ash Data Week 52
Bottom Ash Data 2018 Week 52 The following analytical report was sent to the Ministry of Environment and Climate Change Strategy on January 10, 2019. The data represents bottom ash composite results for
More informationBhumi Research Centre (Civil Engineering Testing Laboratory), 2/1362, 'Bhumi House', Sagrampura, Ring Road, Surat, Gujarat
Bhumi Research Centre (Civil Engineering Testing ), Last Amended on - Page 1 of 6 AT LABORATORY I. SOIL & ROCK 1. Soil Grain Size Analysis IS 2720 (Part 4): 1985 Rev. 2, (RA 2007) Hydrometer Analysis IS
More informationSIMPLIFIED MATERIALS ANALYSIS VIA XRF. Ravi Yellepeddi and Didier Bonvin Thermo Fisher Scientific (Ecublens) SARL, Ecublens/Switzerland
SIMPLIFIED MATERIALS ANALYSIS VIA XRF Ravi Yellepeddi and Didier Bonvin Thermo Fisher Scientific (Ecublens) SARL, Ecublens/Switzerland SIMPLIFIED MATERIALS ANALYSIS VIA XRF Ravi Yellepeddi and Didier Bonvin
More informationBottom Ash Data Week 47
Bottom Ash Data 2018 Week 47 The following analytical report was sent to the Ministry of Environment and Climate Change Strategy on December 6, 2018. The data represents bottom ash composite results for
More informationVHG Labs/LGC Standards Wear Metals Performance Testing Program (PTP)
VHG Labs/LGC Standards Wear Metals Performance Testing Program (PTP) Featuring Real-Time On-Line Result Evaluation General Instructions Table of Contents Introduction.. 3 PTP Test options. 4 Ordering a
More informationfermacell AESTUVER Fire-protection board
fermacell AESTUVER Fire-protection board European Technical Assessment Datum: 30.09.2014 European Technical Assessment ETA-11/0458 of 30 September 2014 General Part Technical Assessment Body issuing the
More informationCertificate of Analysis Work Order : LK [Report File No.: ]
Certificate of Analysis Work Order : LK40078 [] To: Mike Koziol COD SGS MINERALS Unit 7 3C Kelly Lake Road Sudbury ON P3E P Date: Dec 3, 204 P.O. No. Project No. No. Of Samples Date Submitted Report Comprises
More informationTHE SPRINGBACK ANALYSE ON SHEET ALUMINUM V BENDING USING AN SYSTEMIC ANALYSIS ON BENDING OPERATION
THE SPRINGBACK ANALYSE ON SHEET ALUMINUM V BENDING USING AN SYSTEMIC ANALYSIS ON BENDING OPERATION Mihalache Ștefan 1, Nagîț Gheorghe 2, Chiorescu Dan 3 59 A, Dimitrie Mangeron street, IASI-700050, ROMANIA
More informationChem : Feb.12-17
Chem. 25-26: Feb.2-7 Preparation Pre-lab Report (p.90) for E3 completed Discussion Presentation for E2 completed Pre-lab reading and studies for E3 completed Lab Agenda One hour discussion of E 2(Questions,
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited WESTMORELAND MECHANICAL TESTING & RESEARCH Youngstown, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance
More informationOPTIMIZATION OF PROCESS PARAMETERS OF FRICTION STIR WELDED JOINT BY USING TAGUCHI METHOD
OPTIMIZATION OF PROCESS PARAMETERS OF FRICTION STIR WELDED JOINT BY USING TAGUCHI METHOD Vanita S.Thete Department o Mechanical Engg,, S.V.I.T COE,Nashik Prakash. N. Wakchaure Department o Mechanical Engg,,
More informationTechnical Report (example)
Technical Report (example) Food safety test Carried out for: Company name Attn.: Contact person TZ/MSO/BBJ date Certificate ID: ID number Materials Testing Kongsvang Allé 29 8000 Århus C Tel.: +45 72 20
More informationTesting of Johnson Matthey s control samples
Appendix 13. Report by Nikolay Kharkov on the 2003 JM test entitled: Testing of Johnson Matthey s control samples. FSS Criminalistics Institute of Russia Testing of Johnson Matthey s control samples Moscow
More informationApplication of Drilling Mud Waste as Raw Material In Building Brick Making
International journal of scientific and technical research in engineering (IJSTRE) www.ijstre.com Volume 2 Issue 3 ǁ March 2017. Application of Drilling Mud Waste as Raw Material In Building Brick Making
More informationLecture Document for Metal Analysis (by the JICA Expert Team) Theoretical Training for AAS
31 3 1 32 1000/1 1000000/1 100000/1 01 31 01 ppm 1000 ppm 20 15 10 05 20 ppm ppm 05 10 05 31 4 2 1 41 1 41 1 2 41 42 2 41 x 100 42 30 20 10 0 ppm 100 Mg 10 ppm 10 Mg 100 03+x 02+x 01+x x x ppm 2 42 10
More informationMark Litchy Gary VanSchooneveld CT Associates, Inc. Juergen Hahn Levitronix GmbH. Levitronix Ultrapure User Conference 2013 April 11, 2013
Evaluation of Particle Shedding and Trace Metal Extraction from Centrifugal Pumps Mark Litchy Gary VanSchooneveld CT Associates, Inc. Juergen Hahn Levitronix GmbH Levitronix Ultrapure User Conference 2013
More informationSCOPE OF ACCREDITATION TO ISO GUIDE 34:2009
SCOPE OF ACCREDITATION TO ISO GUIDE 34:2009 SCP SCIENCE 21800 Clark Graham Baie d'urfe, Quebec H9X 4B6 CANADA David Smith Phone: 514 457 0701 dsmith@scpscience.com REFERENCE MATERIAL PRODUCER Valid To:
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Annex to declaration accreditation (scope accreditation) Location(s) where activities are performed under accreditation Head Office Vlamoven 41 6826 TM Arnhem The Netherlands Location Abbreviation/ location
More informationSUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV"
SUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV" Fe 100 low alloy steel Fe 150 free cutting steel Fe 200 cast iron Fe 250 Cr-Hard/Ni.Resist Fe 300 stainless steel Fe 400 tool steel Fe 500
More informationTechnical references for mortar and associated topics
CI/SfB Yq4 (Agm) Issue 7 May 2009 (SUPERSEDES Issue 6 January 2008) Technical references for mortar and associated topics DATA SHEET 9 Mortar Industry Association (MIA) Publications Data Sheet No. 1: January
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11325-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 23.01.2017 to 22.01.2022 Holder of certificate: INDUSTRIE-LABOR
More informationTrace metal contamination of soils and sediments in the Port Kembla area, New South Wales, Australia
University of Wollongong Thesis Collections University of Wollongong Thesis Collection University of Wollongong Year 9 Trace metal contamination of soils and sediments in the Port Kembla area, New South
More informationIssue February 2016 Valid to December ISO 9001 Registered Quality Management
Issue February 2016 Valid to December 2016 ISO 9001 Registered Quality Management 015 Index January 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 46
More informationAdvanced Energy Storage and the Importance of Graphite Anode Materials
Advanced Energy Storage and the Importance of Graphite Anode Materials Dr. John C. Burns CEO Novonix, Canada Dr. Edward R. Buiel CEO PUREgraphite, USA July 19, 2017 1 Overview LIB Raw Materials + How much
More informationSTUDY OF ELEMENT FINGERPRINTING IN GOLD DORÉ BY GLOW DISCHARGE MASS SPECTROMETRY
STUDY OF ELEMENT FINGERPRINTING IN GOLD DORÉ BY GLOW DISCHARGE MASS SPECTROMETRY MICHAEL W. HINDS, Ph.D. 1 ELEMENT FINGERPRINTING In 1994, John Whatling* used laser ablation inductively coupled mass spectrometry
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Wenkebachstraat 1 1951 JZ Velsen-Noord The Netherlands Location Abbreviation/ location code Wenkebachstraat 1 1951 JZ Velsen-Noord
More informationIPSCO Research & Development Center. Commercial Testing Capabilities
IPSCO Research & Development Center Commercial ing Capabilities A Wide Range of ing IPSCO s 70,000 square foot Research & Development Center combines the most advanced virtual and physical testing equipment
More informationUsing Mass Metrology for Process Monitoring and Control During 3D Stacking of IC s
Metryx Copyright 1 Using Mass Metrology for Process Monitoring and Control During 3D Stacking of IC s SEMATECH 3D Interconnect Workshop 11 th July 2012 Metryx Copyright 2 Mass Metrology Less Mass More
More informationIllinois State Water Survey Division
Illinois State Water Survey Division ATMOSPHERIC CHEMISTRY SECTION SWS Contract Report 482 SURFACE DUST ELEMENTAL PROFILES - GRANITE CITY by Stephen J. Vermette and Allen L. Williams Sponsored by the Illinois
More informationArihant Analytical Laboratory Pvt. Ltd., Plot No. 272, Sector-57, Phase-IV, HSIIDC, Kundli, Sonepat, Haryana
Arihant Analytical Pvt. Ltd., Plot No. 272, Sector-57, Last Amended on - Page 1 of 19 I. MECHANICAL PROPERTIES OF MATERIALS 1. High Strength Deformed Bars Mass Per Meter Run IS 1786: 2008 Tensile Strength
More information