WB produces >>> 1. TANK FITTING PRODUCTS 2. ALUMINUM DOME COVERS 3. INTERNAL FLOATING ROOF SYSTEMS 4. EXTERNAL FLOATING ROOF SEAL SYSTEMS

94115 Vacuum Vent (Side Mounted) Features. Vacuum Vent (Side Mounted) Side Mounted

94115 The Shand & Jurs 94115 Vacuum Vent has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum

94020 Conservation Vent (Pressure & Vacuum) Features

The Shand & Jurs Model Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation fittings. Continued design improvements provide these vents

94130 Pressure Relief Vent (Open or Closed Vent Option) Features

94130 (Open or Closed Vent Option) The Shand & Jurs 94130 is designed to provide pressure relief with high efficiency, maximum flow capacity and minimum leakage. The easily serviceable configuration and

94020 Conservation Vent (Pressure & Vacuum) Features

The Shand & Jurs Model Conservation Vent is designed utilizing over 90 years of experience in producing high quality and dependable conservation fittings. Continued design improvements provide these vents

94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature

The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fittings. The function of this vent is to relieve vacuum conditions in

Varec 2010B/2020B Pressure and Vacuum Relief Valves 2010B

Varec 0B/B The Varec 0B/B protects tanks from damage or deformation, and minimizes emissions to the environment, as well as loss of product due to evaporation. Introduction The Varec 0B and B and Relief

94110 Vacuum Vent. Features. Vacuum Vent. Less need for special materials in corrosive and extreme temperature

The Shand & Jurs 94110 has been designed utilizing over 90 years experience in the development of quality safety and conservation fi ttings. The function of this vent is to relieve vacuum conditions in

94160 Pressure Relief Vent. Features. Pressure Relief Vent. Designed for high efficiency & economy. Provides maximum flow capacity

The Shand & Jurs provides pressure relief for storage tanks and low pressure vessels. Utilizing a flange mounted design, this economical vent provides maximum flow capacity and high efficiency. The improved

VAREC SERIES 2010B/2020B/3500B PRESSURE AND VACUUM RELIEF VALVE INSTRUCTION, OPERATION AND MAINTENANCE MANUAL

Before installation these instructions must be fully read and understood 2010B 3500B 2020B The VAREC Vapor Control Inc. 2010B/2020B/3500B Series pressure and/or vacuum relief valves have not been tested

VAREC 3600B/3650B SERIES PRESSURE OR VACUUM RELIEF VALVES INSTRUCTION, OPERATION AND MAINTENANCE MANUAL

Before installation these instructions must be fully read and understood 3600B 3650B DISCLAIMER OF WARRANTIES The contract between Varec Vapor Control Inc. and our customer states Varec Vapor Control Inc.

WB produces >>> FLOATING ROOF DRAIN SYSTEMS 2. ALUMINUM DOME COVERS 3. INTERNAL FLOATING ROOF SYSTEMS 4. EXTERNAL FLOATING ROOF SEAL SYSTEMS

WB produces >>> 1. 3+1 2. ALUMINUM 3. 4. SEAL 5. WB, World Best Products, World Best Service, World Best Technology INDEX >>> 1. WB Patented Twin Access Type FSJ 03 2. Demonstration Works and Pictures

General Service Butterfly Valves. Series 120, 140, 160, 300

General Service Butterfly Valves Series 0, 0, 0, 00 Av-Tek Butterfly Valves Concentric Series Technical Data Size Range: Series 0 - " to " Wafer Series 0 - " to 0" Lug Series 0 - " to " Flanged Series

METAL & DUAL SEATED PISTON VALVES

VP Series VESSEL & REACTOR VALVES METAL & DUAL SEATED PISTON VALVES PROCESS VALVES HIGH PERFORMANCE PISTON VALVES Dual Seal Piston Valve Code: VP4D-VP6D High sealing performance of Dual Seal specially

VESSEL & REACTOR VALVES. VR Series RISING DISC PROCESS VALVES. Sold by: G&W Industrial Sales

VR Series VESSEL & REACTOR VALVES RISING DISC PROCESS VALVES CRUST BREAKING BOTTOM OUTLET VALVES Rising Disc Valves M Seal for high Pressure & Temperature. Dual Seal, Soft Seal, M Ring and M Control are

vapor control systems Quality, Dependability, Service. Reputation Built on Valve Concepts, Inc. com A Cashco, Inc.

vapor control A Cashco, Inc. Company systems Reputation Built on Quality, Dependability, Service. Get Consistent Quality By involving every employee in our ISO 9001:2000 Quality Assurance Program, you

VESSEL & REACTOR VALVES. VD Series DISC VALVES PROCESS VALVES

VD Series VESSEL & REACTOR VALVES DISC VALVES PROCESS VALVES FULL FLOW BOTTOM OUTLET VALVES Tank Bottom Disc Valve M Ring for high temperature & vacuum. Other sealing systems are available Code: VD4R-VD6R

450 and 550 Series Pressure/Vacuum Relief Valve (ATEX Approved)

Instruction Manual 450 and 550 Series March 2015 450 and 550 Series Pressure/Vacuum Relief Valve (ATEX Approved) Table of Contents Introduction...1 Specifications...2 Principle of Operation...4 Installation...4

P600 Pressure Regulator

P00 Pressure Regulator The BelGAS P00 series is a direct operated, pressure reducing regulator that can be used as a pressure loaded regulator, switching valve, or monitoring regulator. Available with

vapor control systems Quality, Dependability, Service. Reputation Built on Valve Concepts, Inc. com A Cashco, Inc.

vapor control A Cashco, Inc. Company systems Reputation Built on Quality, Dependability, Service. Get Consistent Quality By involving every employee in our ISO 9001:2000 Quality Assurance Program, you

TOTAL PIPING SOLUTIONS, INC. Quick Cam. Rapid Seal Repair Clamp. Patent Pending Technical Specifications

TOTAL PIPING SOLUTIONS, INC. Quick Cam Rapid Seal Repair Clamp Technical Specifications Rev B July 2017 1. Pressure Rating: Quick Cam Rapid Seal Repair Clamps by when properly installed are capable of

Table of Contents Scope of Design. Scope of Design Materials Dimensions & Weights Orifice Capacities

Scope of Design CONSOLIDATED Type 1511 safety valves are designed for low pressure, steam heating boilers and steam generators as well as air service applications. Table of Contents Scope of Design......................1511.1

WaTER & WasTEWaTER Since 1978

WaTER & wastewater Since 1978 About HMT HMT has been providing quality products and services for liquid storage to the global market for over 30 years. Our success is attributed to our exceptionally customer-oriented

Operating Instructions

Operating Instructions A-2600 SERIES AWWA SWING CHECK VALVE 500 West Eldorado Street Decatur, Illinois 62522 www.muellercompany.com! WARNING! 1. Read and follow all pertinent instructions carefully. Proper

Varec 3500B, 3600B and 3650B Series Weight Loaded Vacuum or Pressure Relief Valves. 3500B Series

Varec 00B, 00B and 0B Series Weight Loaded or Pressure Relief Valves The 00B, 00B and 0B vacuum breakers are designed to provide superior seat tightness while protecting liquid storage vessels, vapor recovery

1511 Series. Consolidated * Valves. Safety Valve

GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1511 Series Safety Valve Offering proven, high-performance design for low-pressure, steam heating boilers and steam generators, as well

RSCV1 AMERICAN DARLING MARK 73 2 FIRE HYDRANT AMERICAN FLOW CONTROL. It s What We Know. SERIES 2100 RESILIENT SEATED CHECK VALVE

3 16 SERIES 2100 RESILIENT SEATED CHECK VALVE AMERICAN FLOW CONTROL It s What We Know. AMERICAN DARLING MARK 73 2 FIRE HYDRANT CONSTRUCTION SERIES 2100 RESILIENT SEATED CHECK VALVE DROP-TIGHT SEATING at

Arms Group Drainage System. 1. Swivel Joint Type 2. Pivot Joint Type 3. Flexible Hose Type 4. Swing Master Joint Type 5. Floating Check Valve

Arms Group Drainage System 1. Swivel Joint Type 2. Pivot Joint Type 3. Flexible Hose Type 4. Swing Master Joint Type 5. Floating Check Valve Swivel Joint Type Model No. 1010 Sizes 3in through 8in Heavy

info@atecotank.com 1 The ATECO Aluminium Geodesic Dome features a clear-span, all-aluminium, lightweight, corrosion-resistant structure which sets a new standard for performance in aluminium geodesic domes.

COMBINATION AIR VALVE

MINING DIVISION COMBINATION AIR VALVE FOR HIGH FLOW D-6NS SERIES DESCRIPTION The D-6NS Series Combination Air Valve has the features of both an air release valve and an air & vacuum valve. The air release

M15 ISO Ball Valve DN¼" to DN2½"

Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

VAPOR CONTROL SYSTEMS QUALITY, DEPENDABILITY, SERVICE. REPUTATION BUILT ON. Valve Concepts, Inc. www.

VAPOR CONTROL A Cashco, Inc. Company SYSTEMS REPUTATION BUILT ON QUALITY, DEPENDABILITY, SERVICE. www.cashco co com w ons Get Consistent Quality By involving every employee in our ISO 9001:2000 Quality

1982 Series. Consolidated * Valves. Safety Relief Valve

GE Oil & Gas Technical Specifications 08/2014 Consolidated * Valves 1982 Series Safety Relief Valve A unique design that combines top performance, capabilities and features within an economical, modular

Model 1220A PRESSURE / VACUUM RELIEF VALVE PRESSURE / VACUUM RELIEF VALVE WITH PIPE-AWAY FEATURE SPECIAL FEATURES GROTH,THE CAPABILITY COMPANY

Sizes 2 through 12 Pressure settings 0.5 oz/in 2 to 15 PSIG Vacuum settings 0.5 oz/in 2 to 12 PSIG PRESSURE / VACUUM RELIEF VALVE Model 1220A with Pipe-Away Feature Available in aluminum (type 356), carbon

SECTION TAPPING SLEEVES AND VALVES

SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK

P630 HIGH FLOW GAS REGULATOR

P60 HIGH FLOW GAS REGULATOR P60 HIGH FLOW GAS REGULATOR Stainless Steel Internals are Standard Steel Units comply with NACE MR0 Durable Powder Coated Exterior Wide Range of Flow Capacities The P60 is a

Cryogenic Metal Seated Butterfly Valves

Cryogenic Metal Seated Butterfly Valves The Key to Cryogenic Valve Solutions VELAN S.A.S VELAN Inc Group VELAN inc is one of the world's leading independent manufacturer of steel gate, globe, check, butterfly

1.2 REFERENCES.1 American National Standards Institute (ANSI)/American Society of Mechanical Engineers (ASME)

Issued 2005/06/01 Section 15113 Valves Cast Steel: Gate, Globe, Check, Ball Page 1 of 5 PART 1 GENERAL 1.1 RELATED SECTIONS.1 Section 01355 Waste Management and Disposal 1.2 REFERENCES.1 American National

Cover Page - Series 60 Wafer Check Valves

DESCRIPTION Cover Page - Series 60 Wafer Check Vs Standard Features Section 2 Index BULLETIN NO. CV-100 CV-101R3 VALVE DIMENSIONS - DIN 3202 DRAWING NO. 2 to 12 (Inches) / CV Values & Construction Materials

Pressure Relief Valves. 1900/P Series. Consolidated Safety Relief Valve

Pressure Relief s 1900/P Series Consolidated Safety Relief Table of Contents Conversion Table..................................................... 1900/P.2 Features & Benefi ts...................................................

LEADING THE STORAGE TANK INDUSTRY IN EFFECTIVE SOLUTIONS

INNOVATION GEODESIC DOME ROOF - INTERNAL FLOATING ROOF FLOATING ROOF SEAL FLOATING ROOF DRAIN SYSTEM FLOATING SUCTION UNITS VENTS EMISSION CONTROL SOLUTIONS - LIGHTNING PROTECTION SYSTEMS LEADING THE STORAGE

SPECIFICATIONS FOR HONEYCOMB INTERNAL FLOATING ROOFS

PETREX SPECIFICATIONS FOR HONEYCOMB INTERNAL FLOATING ROOFS APPLICATION: REGULAR HYDROCARBONS SCOPE The roof shall be full-surface contact type designed to eliminate the presence of air-vapor mixture under

SAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200

SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on

P133 Pressure Regulator

P33 Pressure Regulator Suitable for Monitoring Balanced Supply Valve Wide Pressure Range Offering The P33 is a direct operated pressure reducing regulator with external pressure registration used in commercial

Trunnion Ball Valves

Trunnion Ball Valves Trunnion Ball Valves Our Trunnion Ball Valve is designed for use in gas applications. This full bore, through conduit valve utilizes a 3 piece, forged steel body, trunnion supported

ATECO TANK TECHNOLOGIES ENGINEERING CO.LTD. ALUMINIUM HONEYCOMB FULL-CONTACT TYPE ULTIMATE DESIGN SUPERIOR STRUCTURE.

ALUMAX-HEXCORE FULL CONTACT IINTERNAL FLOATIING ROOF ALUMINIUM HONEYCOMB FULL-CONTACT TYPE ULTIMATE DESIGN SUPERIOR STRUCTURE www.atecotank.com OUR ALUMINIUM HONEYCOMB PANEL PRODUCTION LINE ALUMINIUM HONEYCOMB

VAREC SERIES 711 PRESSURE RELIEF VENT

VAREC SERIES PRESSURE RELIEF VENT A spring-loaded vent designed to protect low and medium pressure storage tanks, gas headers, process vessels and waste gas collection systems from overpressure FEATURES

Section 11. API 7500lb Mud Gate Valves

Section 11. API 7500lb Mud Gate Valves Section 11a API 7500lb Rubber Seated Mud Gate Valves Gate Valves are designed and manufactured in accordance with the following specifications:- API 6A ANSI B31.3

Tel. : , Fax : W.Site :

Training Course : Bulk Storage Tanks In Service Training Course For One Week In UAE, Dubai, Cityseason Suites Hotel Which Be Held As Under Details : Tel. : 00965 22610021 99600277, Fax : 00965 22630021

SQUARE PORT KNIFE GATE VALVE

SQUARE PORT KNIFE GATE VALVE The SERIES 90 knife gate is a square port low-pressure valve for solid loaded fluids, mainly used in bulk handling and silo outlet applications in industries such as: Power

The Sta-Saf. System. Reverse Buckling Technology , Section D Rev. 1

77-4001, Section D Rev. 1 BS&B SAFETY SYSTEMS, L.L.C. BS&B SAFETY SYSTEMS, LTD.. The Sta-Saf System Reverse Buckling Technology Visit our websites at www.bsbsystems.com and www.bsb.ie for the most complete,

Underground fire hydrants

Underground fire hydrants The company was founded in 987 by transforming the former CSA, which was a trading company dealing with pipes and valves for water networks, into a manufacturing company, through

1071 Cast Steel Globe Steam Stop Valve (Flanged)

1071 Cast Steel Globe Steam Stop Valve (Flanged) Flanged Ends to DIN 2545 PN 40. Straight Pattern, Outside Screw, Yoke Type, Rising Stem, Bolted Bonnet. Renewable 13% Cr. Stainless Steel (S.S 410) working

RHINO VALVES WORLDWIDE. Cryogenic C44/C600 CRYOGENICS

RHINO VALVES WORLDWIDE Cryogenic C44/C600 CRYOGENICS Based on the Series 44, this valve has an extended stem to move away the drops cryogenic temperatures of the operator (human or automatic). This valve

Masoneilan * Series Control Valve

GE Oil & Gas Masoneilan * 72000 Series Control Valve Large Mass Flow Energy Management Control Valves Technical Specifications 05/2013 Table of Contents Introduction...3 Product Features...3 General Data...5

Type 56 Butterfly Valve

Standard Features (Sizes -/2" ") Standard model (-/2" ") has Body and Disc for better chemical resistance at temperatures higher than can be achieved with. " has body and disc as standard. Our 3/3 stainless

Code. 1) Code. Standard or Specification. Bolting

Code 1. Code 1) Code (1) ASME B 31.1 : Power Piping (2) ASME B 31.3 : Process Piping (3) ASME B 31.4 : Pipeline Transportation Systems for Liquid Hydrocarbons and Other Liquids 2) Material Code Bolting

Section 20. Globe Valves

Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are

Swing Check Valve. Valve Standards: Complies with EN 12334, BS 5153, MSS SP-71 or AWWA C508

Swing Check Valve PN16/PN25/Class125/Class250 Valve Standards: Complies with EN 12334, BS 5153, MSS SP-71 or AWWA C508 Size 50 to 600 working pressure PN16/Class125. Size 50 to 300 working pressure is

L104 PTFE L120 PTFE. Type S Gasket. applications. For use on ASME B 16.5 flanges. May be used for above ground or subsea

The DEFENDER TM RG sealing gasket has been designed to offer a positive high integrity sealing solution for use on flange faces that have been subjected to erosion, corrosion, chemical attack and/or abrasion

Combination Air Valves - Stainless Steel/ Sanitary Sewer/ For 2 Thru 12 Mains

D 1 D 1.1 D 1.2 D 1.3 D 1.4 D 1.5 D 2 D 3 D 3.1 D 3.2 D 4 D 4.1 D 5 D 6 D 7 D 8 Valves- Resilient Seat/ 2 (FIPT X FIPT) Valves - AWWA C509/ Resilient Seat/ 2 Thru 12 (MJ X MJ) Tap Valves - AWWA C509/ Resilient

CAST IRON NON-RETURN VALVE SWING TYPE (Reflux Valve)

about us With the "COMMITMENT TO EXCELLENCE" drive, NVR is becoming a foremost name in bronze, brass, cast iron, cast seel and forged steel valves for domestic and industrial applications. Having the most

All our products Quality Assurance QUALITY Ensure quality control and it strive for the following:

ALTOWS COMPANY ABOUT US ALTOWS CO. is a premium supplier of top quality piping components and fittings which include various pipes, tubes, threaded fittings, flanges, fasteners, bars, rods etc. Our products

All definitions are defined according to ANSI/AWWA C

SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR REDUCED-WALL, RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE 4 IN. THROUGH 48 IN. ANSI/AWWA C515-01 July 2017 1. SCOPE This product specification

Preparation and Installation of the FA, FAV, and FAS Type Rupture Discs in Forward Acting Insert, Full Bolted, and Union Type Holders

GEP-6050 Rev. F 23777 Ref. I.D.: 8681 Preparation and Installation of the FA, FAV, and FAS Type Rupture Discs in Forward Acting Insert, Full Bolted, and Union Type Holders WARNING USER SHOULD READ AND

SPECIFICATIONS - DETAILED PROVISIONS Section Stainless Steel Sluice Gates C O N T E N T S

SPECIFICATIONS - DETAILED PROVISIONS Section 11294 - Stainless Steel Sluice Gates C O N T E N T S PART 1 - GENERAL... 1 1.01 SUMMARY... 1 1.02 REFERENCES... 1 1.03 DEFINITIONS... 1 1.04 DESIGN REQUIREMENTS...

This specification describes the minimum requirements for piping systems for the following service:

1.0 APPLICATION 1/8 This specification describes the minimum requirements for piping systems for the following service: Gland Water Design Condition Operating Conditions 50 PSIG @ 150 F 0 to 5 PSIG @ 35

WYATT Orifice flow PrOducTs

WYATT Orifice Differential producers, specifically orifice plates, are used in flow measurement due to their simplicity, ease of installation, tolerance to extreme atmospheric and process conditions, and

Table of Contents Scope of Design

1 Scope of Design Table of Contents Scope of Design Table of Contents.............................................................. 1.1 Introduction..................................................................

Wide-Range Restraint Solutions

HYMAX GRIP Wide-Range Restraint Solutions HYMAX GRIP. THE TEETH MAKE THE DIFFERENCE. There are many situations that require couplings with additional restraining power. HYMAX restraint products combine

º to 150º F In accordance with this specification and

SPEC-3006 2016/0/18 1/10 1.0 PURPOSE This specification describes the minimum requirements gland water piping systems operating at or below 400 PSIG. Gland water systems are to be constructed either of

High Temperature Aging Cell Instruction Manual

High Temperature Aging Cell Instruction Manual Part No. 760140001EA Rev. D TABLE OF CONTENTS Section Page Figure 1 General Information... 1 2 Safety Considerations... 3 3 Un-pressurized Testing Procedure...

CROSBY H-SERIES DIRECT SPRING SAFETY VALVES

DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications

Light-Metal Roof Edge, Raised

NAIL WOOD CANT TO BLOCKING 2 ROWS STAGGERED EACH ROW 24 O.C. 1/2 MIN. 10 0 MAX. FASTEN 18 O.C. WITH NEOPRENE GASKETED FASTENERS 3-1/2 MIN. 4 6 JOINT COVER PLATE SET IN TWO BEADS OF SEALANT 4 MIN. SPECIFIED

A Quick Look at Essential Oil Extraction Solutions

A Quick Look at Essential Oil Extraction Solutions Swagelok Penn Swagelok Penn is the authorized sales and service center for southeastern Pennsylvania, southern New Jersey and the entire state of Delaware.

Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN Working Pressure: PN16

Class 125S/200WOG Bronze Gate Valve Non-Rising Stem, Threaded Ends Testing: BS EN 12288, BS 5154, BS EN 12266 Working Pressure: PN16 FIG. 201 WORKING PRESSURE Working Pressure Non-Shock (psi) Saturated

Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications.

Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications. Features Heavy integral Stellite hardfacing on both body and disc seating surfaces. Conical

Iron Check Valves & Y-Strainers Illustrated Index

Iron Check Valves & Y-Strainers Illustrated Index Iron Body Swing Check Valve Bronze Mounted or All Iron 125 lb. SWP 200 lb. CWP Iron Body Swing Check Valve Bronze Mounted 250 lb. SWP 500 lb. CWP Lead

KEYSTONE SWING TYPE WAFER CHECK VALVE FIGURE 86

High capacity, spring loaded swing type wafer check valve FEATURES Lightweight, wafer type check valve with face-to-face dimensions according ISO 5752, table 5 long High flow capacity featuring a special

NEOTECHA NXR PFA LINED BALL VALVES

These PFA lined ball valves are used in a wide variety of applications in many industries FEATURES GENERAL APPLICATION The valves are ideally suited for corrosive applications, requiring reliable performance,

KEYSTONE SLIDE GATE VALVES FIGURE 215

Slide through, O-port gate design for severe service applications FEATURES GENERAL APPLICATION For severe service and specialty applications Pulp and paper Recycle paper Chemical Petrochemical Power Mining

Figure 215. Slide through, O-port gate design for severe service applications. Features

Slide through, O-port gate design for severe service applications Features General Application For severe service and specialty applications Pulp and paper Recycle paper Chemical Petrochemical Power Mining

D-060 PN 16 D-060-C PN 16 D-062 PN 25 D-065 PN 40. A.R.I. FLOW CONTROL ACCESSORIES Ltd. Combination Air Valve for High Flow. Description.

D-00 PN Water Supply D-00- PN D-0 PN D-0 PN 0 ombination ir Valve for High Flow us-d00wtr- Description The D-00 series ombination ir Valve has the features of both an air release valve and an air & vacuum

American Flow control 2-12 Series 2500

American Flow control 2-12 Series 2500 Resilient wedge gate valve FLOW CONTROL Construction Ductile iron operating nut Provides strength and durability. Upper O-ring seals Can be replaced while the valve

THE WORLD LOOKS UP TO COMPOSITE ELEVATED TANK

THE WORLD LOOKS UP TO COMPOSITE ELEVATED TANK or our breadth of capability. Of all the storage tank manufacturers doing business today, no other offers Caldwell s range of capability. We are the only manufacturer

This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG.

SPEC-3501 2016/11/0 1/9 1.0 APPLICATION This specification describes the minimum requirements for piping systems for the following service: Plant air systems operating up to 125 PSIG. Design Conditions

Kor Inc. FLOCENTRIC TM ECCENTRIC PLUG

Kor Inc. FLOCENTRIC TM ECCENTRIC PLUG ECCENTRIC PLUG VALVE FLOCENTRIC TM The FLOCENTRIC Eccentric Plug Valve is manufactured using CNC equipment in a world class facility using the finest materials available.

All definitions are defined according to ANSI/AWWA C b. Flanged Joint: The flanged and bolted joint as described in ANSI/AWWA C110/A21.10.

21-02 SAN ANTONIO WATER SYSTEM SPECIFICATIONS FOR RESILIENT-SEATED GATE AND TAPPING VALVES FOR WATER SUPPLY SERVICE ANSI/AWWA C509-01 3 IN., 4 IN., 6 IN., 8 IN., 10 IN., 12 IN., 16 IN., & 20 IN. Revised

ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500#

ALLOY BALL VALVES 7000 SERIES METAL AND SOFT SEATED 150# TO 2500# The Jarecki 7000 Series ball valves are available in a variety of materials, end connections, and seat materials. They are a proven in

Diffused Aeration Piping Equipment

1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections

NAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments

NAVSEA STANDARD ITEM ITEM NO: 009-50 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Horizontal Swing Check Valve; repair 2. REFERENCES: 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other

Carbon steel or Stainless steel

MADE OF STAINLESS... Size : Ends : Min Temperature : Max Temperature : DN 8 to DN 50 Butt Welding, Socket welding or straight welding - 30 C in stainless steel and -20 C in carbon steel + 180 C Max Pressure

Roof Accessories. Division Roof Hatches Roof Safety Rails Safety Posts. Division Smoke Vents

Roof Accessories Distributed by: BEST MATERIALS Ph: 800-474-7570, 602-272-8128 www.bestmaterials.com Email: Sales@BestMaterials.com Division 07 72 33 Roof Hatches Roof Safety Rails Safety Posts Division

Subpart C Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120)

Subpart C Specifications for Pressure Tank Car Tanks (Classes DOT-105, 109, 112, 114 and 120) 179.100 General specifications applicable to pressure tank car tanks. 179.100-1 Tanks built under these specifications

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING. A. This Section includes the following storm drainage piping specialties:

SECTION 221423 - STORM DRAINAGE PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following storm drainage piping specialties: 1. Backwater valves. 2. Cleanouts. 3. Roof drains.

SECTION PIPING SPECIALS

PART 1 GENERAL 1.01 DESCRIPTION A. Work Included The Contractor shall furnish, install, and test the miscellaneous pipeline equipment, complete with accessories, and special equipment as shown on the Contract

SECTION GROUND WATER STORAGE TANKS

SECTION 33 16 13 GROUND WATER STORAGE TANKS PART 1: GENERAL 1.01 SCOPE A. Section includes requirements for designing, fabricating, and erecting a welded steel ground storage tank. 1.02 SYSTEM DESCRIPTION

M33H ISO Full Bore Ball Valve DN50 to DN200 Flanged ASME 150 and ASME 300

Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE

AMERICAN FLOW CONTROL 2"-12" SERIES 2500 RESILIENT WEDGE GATE VALVE CONSTRUCTION DUCTILE IRON OPERATING NUT Provides strength and durability. UPPER O-RING SEALS Helps isolate the lubrication chamber as

4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT

AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design

SECTION ALUMINUM GEODESIC DOME. This section includes materials, fabrication and erection of the aluminum geodesic dome.

SECTION 133310 ALUMINUM GEODESIC DOME PART 1 - GENERAL A. Description This section includes materials, fabrication and erection of the aluminum geodesic dome. B. Related Work Specified Elsewhere 1. General