AQA GCSE Design and Technology 8552
|
|
- Noah Walsh
- 6 years ago
- Views:
Transcription
1 AQA GCSE Design and Technology 8552 Metals and alloys Unit 3 Materials and their working properties 3
2 Objectives Know the primary sources of materials for producing metals and alloys Be able to recognise and characterise different types of metals and alloys Understand how the physical and working properties of a range of metals and alloys affect their performance
3 Metal Metals have been essential in the development of civilisation The word metal comes from the ancient Greek word metallon which means to mine, excavate or extract from the ground Prehistoric man used metals to make tools and weapons Which common metals would you find in a domestic kitchen?
4 Ore The Earth s crust contains many types of rock Metallic minerals are found naturally in rock or ore Ore is obtained by mining and the metals within it are extracted The method used for extraction depends on the metal s reactivity with air, water or acids The more reactive the metal, the more expensive it is to extract
5 Finding metal Some naturally occurring metals are found as lumps in the rock and don t require a chemical extraction Why is gold expensive in comparison to aluminium?
6 Extraction processes Some metals exist as oxides Metals such as copper, iron and zinc are oxides. These are heated with carbon to extract the metal Electrolysis is used to extract metals such as aluminium Are metals a renewable resource? How can man reduce the speed at which we will run out of natural resources?
7 Iron ore Iron can be extracted from iron ore by using a blast furnace and the process of smelting Smelting extracts common industrial metals such as iron The extreme heat draws off the metals in a liquid state called hot metal The impurities are removed and the iron mixed or alloyed with a small amount of carbon to create steel The amount of added carbon affects the strength of the steel
8 Ferrous metals Ferrous metals contain iron and may rust Iron and steel can corrode this is known as rust Rust is a compound called iron oxide and is formed when iron and oxygen react in the presence of moisture or water Most ferrous metals are magnetic Name two types of protective layer that could be added to metal to help prevent rust
9 Ductility and malleability Ductile metals Will stretch without being damaged Can be drawn or stretched out into long wires Copper is highly ductile and can be drawn into long, thin wires Malleable metals Can be hammered into a shape without breaking Can be rolled or pressed into sheets Will deform under compression
10 Hard or tough? Hardness a material s ability to withstand abrasion A very hard metal is likely to crack or shatter upon impact or force. Cast iron would be described as hard and brittle Toughness metal requires strength and ductility This is how well a metal can absorb energy and resist fracturing without deforming
11 Tensile strength Tensile strength is the amount of tensile stress (stretching) a material can withstand before breaking or failing Testing for tensile strength is crucial in industry Suggest two uses for metals with high tensile strength Why is destructive testing so important?
12 Hard as nails Steel is a ferrous metal available in different forms Steel has a high resistance to corrosion, staining and friction which makes it suitable for a wide range of uses These elements give steel its characteristic properties of hardness and toughness High speed steel is formed by alloying elements of carbon, tungsten, vanadium, cobalt, chromium or molybdenum Name three everyday applications of stainless steel
13 Material selection Ferrous metals have varying properties making them suitable for different uses Low carbon steel is tough, ductile and easily welded High carbon steel is very hard wearing, but less ductile or malleable Cast iron is hard and easily cast into shapes, but brittle Suggest two items made from each of these metals?
14 Non-ferrous properties Non-ferrous metals don t contain iron They are often more expensive than ferrous metals owing to their desirable properties which include: Lightweight Good conductivity Ductile and malleable Resistant to corrosion The process of galvanising adds a protective coat of zinc to iron and steel to help prevent rusting
15 Electrical conductivity Conductivity is how easily an electrical current can flow through a metal As copper is such an efficient conductor, it s most common use is in electrical cabling
16 Thermal conductivity Thermal conductivity measures the ability of a metal to conduct heat Copper is also an excellent conductor of heat and is commonly used in air conditioning, water tanks, saucepan bases and water heaters In what environment would it be more appropriate to use steel than copper?
17 Non-ferrous metals Aluminium, copper, tin and zinc are all non-ferrous metals List a selection of household items that may be made from non-ferrous metals In what way do non-ferrous metals differ from ferrous metals?
18 Tin Tin is commonly associated with a tin can In fact, the can is steel, with a thin coating of tin, tin plating, which helps preserve the contents Tin is soft, ductile and malleable Alloys of tin include pewter, copper, bronze and soft solder What other non-ferrous metal is associated with the production of cans?
19 Alloys Metals are rarely used in their pure form. Alloys are made by combining two or more elements This helps improve the working properties and appearance Brass and steel are common alloys Stainless steel is made by combining iron, with a small amount of carbon and chromium This protects the alloy from oxygen what will this help prevent? What are the advantages of creating alloys?
20 Worksheet Complete Tasks 1 and 2 on your worksheet
21 Uses of metals Given the various properties of metals, list as many metals as you can that are used to make this bicycle
22 Uses of metals Answers A vast range of metals may be used to create a single product Twisted strands of steel in the brake cables, aluminium and steel in the brake handle Aluminium or stainless steel shopping basket Steel or aluminium spokes Steel wire in the tyres, zinc in the manufacture of rubber Fused or welded joints are usually brass (a copper / zinc alloy) Frame could be low carbon steel, aluminium alloy Aluminium alloy in the pedals Steel springs Aluminium mud guards Chain made of carbon steel High speed steel in ball bearings, pedals, wheel hubs, headstocks, cranks
23 Worksheet Complete Task 3 of the worksheet
24 Everything but tin? Tin probably didn t feature in your bicycle list Working with recycled cans is a technique called Kapoaka Used in Madagascar by small scale workshops, crafters make decorative objects and toys for sale It has created sustainable employment and helps the poorest in Africa attain a living from the profits
25 Oxidisation Non ferrous metals such as copper and bronze, don t rust, but may oxidise Oxidising can be caused by corrosion or weather exposure over a period of time A thin layer of tarnish that appears on the surface of the metal is known as a patina A natural patina occurring on copper is called Verdigris The green hue can be manufactured by adding acetic acid to copper and is often used in architecture for aesthetic purposes
26 Plenary What are metals commonly extracted from? Name three ferrous metals Which metal would you select for high conductivity? Explain the term alloy Describe the difference between hard and tough How can you protect metal from oxidisation? Justify one metal used to manufacture cutting tools
27 Copyright 2017 PG Online Limited The contents of this unit are protected by copyright. This unit and all the worksheets, PowerPoint presentations, teaching guides and other associated files distributed with it are supplied to you by PG Online Limited under licence and may be used and copied by you only in accordance with the terms of the licence. Except as expressly permitted by the licence, no part of the materials distributed with this unit may be used, reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic or otherwise, without the prior written permission of PG Online Limited. Licence agreement This is a legal agreement between you, the end user, and PG Online Limited. This unit and all the worksheets, PowerPoint presentations, teaching guides and other associated files distributed with it is licensed, not sold, to you by PG Online Limited for use under the terms of the licence. The materials distributed with this unit may be freely copied and used by members of a single institution on a single site only. You are not permitted to share in any way any of the materials or part of the materials with any third party, including users on another site or individuals who are members of a separate institution. You acknowledge that the materials must remain with you, the licencing institution, and no part of the materials may be transferred to another institution. You also agree not to procure, authorise, encourage, facilitate or enable any third party to reproduce these materials in whole or in part without the prior permission of PG Online Limited.
FACTFILE: GCE TECHNOLOGY & DESIGN
FACTFILE: GCE TECHNOLOGY & DESIGN 1.3 METAL PART 1 Metal Part 1 Learning outcomes Students should be able to: Demonstrate knowledge of the available form of supply of metals; Understand the difference
More informationMetals Ferrous and Non - Ferrous Icons key:
1 of 9 Metals Ferrous and Non - Ferrous Icons key: Flash activity. These activities are not editable. Accompanying worksheet. Teacher s notes included in the Notes Page. Useful websites for further information.
More information5072 CHEMISTRY (NEW PAPERS WITH SPA) TOPIC 9: METALS 5067 CHEMISTRY (NEW PAPERS WITH PRACTICAL EXAM) TOPIC 9: METALS
5072 CHEMISTRY (NEW PAPERS WITH SPA) TOPIC 9: METALS 5067 CHEMISTRY (NEW PAPERS WITH PRACTICAL EXAM) TOPIC 9: METALS SUB-TOPIC 9.3 TO 5 EXTRACTION OF METALS; RECYLING OF METALS; IRON LEARNING OUTCOMES
More informationSAMPLE. MEM05051A Select welding processes. MEM05 Metal and Engineering Training Package. Learner guide Version 1
MEM05 Metal and Engineering Training Package MEM05051A Select welding processes Learner guide Version 1 Training and Education Support Industry Skills Unit Meadowbank Product Code: 5721 Acknowledgments
More informationMetal and Non Metals
Metal and Non Metals Malleable Ductile Sonorous Conductor Insulator KEYWORDS Rusting Brass Calcium Chloride Galvanising Reactivity Metals on the Periodic table Metals Non Metals Metals and their properties
More informationOman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS
Oman College of Management & Technology COURSE NAME: MATERIALS SCIENCE PROPOSED BY: DR.MOHAMED ALNEJEM SEMESTER: SECOND 2015/2016 CHAPTER (7): METALS 1 CHAPTER 7 : 2 METALS 3 Which of these things are
More informationEngineering Materials
Engineering Materials Lecture 2 MEL120: Manufacturing Practices 1 Selection of Material A particular material is selected is on the basis of following considerations 1. Properties of material 1. Properties
More information10.4 Uses of Metals. Question Paper. Save My Exams! The Home of Revision. Subject Chemistry (0620) Cambridge International Examinations (CIE)
For more awesome GSE and level resources, visit us at www.savemyexams.co.uk/ 10.4 Uses of Metals Question Paper Level IGSE Subject hemistry (0620) Exam oard ambridge International Examinations (IE) Topic
More informationAQA GCSE Design and Technology 8552
AQA GCSE Design and Technology 8552 Polymers Unit 3 Materials and their working properties 4 Objectives Know the primary sources of materials for producing polymers Be able to recognise and characterise
More informationINDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION METALS CHEMICAL ELEMENTS FOUND IN NATURE IN SOLID STATE AT ROOM
More informationI. PHYSICAL PROPERTIES PROPERTY METALS NON-METALS
Elements can be classified as metals and non-metals on the basis of their properties. Example of some metals are : Iron (Fe), Aluminium (Al), Silver (Ag), Copper (Cu) Examples of some non-metals are :
More informationMetals. General information
Metals. General information Read and copy the following text: Metals are divided into two groups: Metals that contain iron are called Ferrous Metals (Alloys). Metals that do not contain iron are called
More informationEngineering Materials
Engineering Materials Learning Outcome When you complete this module you will be able to: Describe the mechanical properties of ferrous and non-ferrous engineering materials, plus the effects and purposes
More information1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION
METALS: 1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION 1. METALS: Metals are chemical elements found in nature
More informationTopic 9 National 4 Chemistry Summary Notes. Metals and Alloys. Materials
Topic 9 National 4 Chemistry Summary Notes Metals and Alloys LI 1 Materials Materials are all substances and include: metals ceramics plastics natural substances novel substances. Materials can be used
More informationGlossary of Steel Terms
Glossary of Steel Terms Steel Terms Explained. Below we list some of the most common steel terms and explain what they mean. AISI Alloy Alloy Steel Annealing ASTM Austenitic Bar Brinell (HB) Bright Drawn
More information9 Materials. Vocabulary Properties and processes. Kick off
9 Materials Kick off 1 Look at the pictures. Use two words from the list to say why each material has been used. cheap flexible light stiff strong Vocabulary Properties and processes 1 Look at the definitions.
More informationAQA GCSE Design and Technology 8552
AQA GCSE Design and Technology 8552 Unit 2 Energy, materials, systems and devices 3 Objectives Be able to recognise a range of modern materials Describe developments made through the invention of new or
More informationI. PHYSICAL PROPERTIES. PROPERTY METALS NON-METALS 1.Lustre Metals have shining surface. They do not have shining surface.
Elements can be classified as metals and non-metals on the basis of their properties. Example of some metals are : Iron (Fe), Aluminium (Al), Silver (Ag), Copper (Cu) Examples of some non-metals are :
More informationMaterials are all substances and include metals, ceramics and plastics as well as natural and new substances.
National 4 Materials It is hard to imagine life without mobile gadgets such as iphones, ipads and MP3 players. Yet twenty years ago these handy gadgets such as the mobile phone where bigger and cost five
More informationQ1.A student investigated simple cells using the apparatus shown in the figure below.
Q1.A student investigated simple cells using the apparatus shown in the figure below. If metal 2 is more reactive than metal 1 then the voltage measured is positive. If metal 1 is more reactive than metal
More informationAQA GCSE Design and Technology 8552
AQA GCSE Design and Technology 8552 Smart materials Unit 2 Energy, materials, systems and devices 4 Objectives Be able to recognise a range of smart materials Understand how the functional properties of
More informationChapter 3 Metals and Non-metals
Chapter 3 Metals and Non-metals Intext Questions On Page 40 Question 1: Give an example of a metal which (i) (ii) (iii) (iv) Is a liquid at room temperature Can be easily cut with a knife. Is the best
More information001- Engineering Skills Principles-1. Chapter - 03 Material
001- Engineering Skills Principles-1 Chapter - 03 Material 1 Objective of Chapter 3.0 (Material) The aim of this section is to enable the candidate to: 1. Identify metals and compare their properties.
More informationExtracting and using metals. ores. native. Only the most unreactive metals such as gold and platinum are found as native metals.
Extracting and using metals Only the most unreactive metals such as gold and platinum are found as native metals. ores All the other metals we use are extracted from their ores by chemical processes. native
More informationThe table shows the students suggestions about the identity of P.
1 Three students, X, Y and Z, were told that solid P reacts with dilute acids and also conducts electricity. The table shows the students suggestions about the identity of P. Which of the students are
More informationPreliminary Chemistry
Name: Preliminary Chemistry Lesson 1: Metals (Theory Booklet) www.hscsynergyeducation.weebly.com Summary of Key Words Account Account for: state reasons for, report on. Give an account of: narrate a series
More informationDraw a ring around the correct word in the box to complete the sentence.
Q. Iron is the main structural metal used in the world. (a) The diagram represents the particles in iron, Fe. Draw a ring around the correct word in the box to complete the sentence. Iron is described
More informationGRADE 8: Materials 3. UNIT 8M.3 10 hours. Uses of metals. Resources. About this unit. Previous learning. Expectations
GRADE 8: Materials 3 Uses of metals UNIT 8M.3 10 hours About this unit This unit is the third of four units on materials for Grade 8. It is desirable that students should have studied Unit8P.3 on heat
More informationMetals. Key Concepts. Name Date Class. Chapter 4 Elements and the Periodic Table Section 3 Summary
Chapter 4 Elements and the Periodic Table Section 3 Summary Metals Key Concepts What are the physical properties of metals? How does the reactivity of metals change across the periodic table? How are synthetic
More informationATOM STRUCTURE AND BONDING OF METALS
ATOM STRUCTURE AND BONDING OF METALS The atom is composed of a small, central nucleus, which contains protons and neutrons. Shells, or energy levels of electrons surround this nucleus. These electrons
More informationأت ارش. Dr. Abdel-Wahab El-Morsy Faculty of Engineering - Rabigh
Basic Workshop 1 أت ارش There are thousands of materials available for use in engineering applications. Most materials fall into one of three classes that are based on the atomic bonding forces of a particular
More informationUses of metals. Question Paper 2. Chemistry (0620/0971) Cambridge International Examinations (CIE) Topic. Metals Sub-Topic. Uses of metals.
For more awesome resources, visit us at www.savemyexams.co.uk/ Uses of metals Question Paper Level IGSE Subject hemistry (060/097) Exam oard ambridge International Examinations (IE) Topic Metals Sub-Topic
More informationNATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 3 NOVEMBER
MARKING GUIDELINE NATIONAL CERTIFICATE (VOCATIONAL) NQF LEVEL 3 NOVEMBER 2009 This memorandum consists of 5 pages. MARKING GUIDELINE -2- NC1520(E)(N3)/V QUESTION 1: GENERAL 1.1.1 True 1.1.2 True 1.1.3
More information7.3 Bonding in Metals > Chapter 7 Ionic and Metallic Bonding. 7.3 Bonding in Metals. 7.1 Ions 7.2 Ionic Bonds and Ionic Compounds
Chapter 7 Ionic and Metallic Bonding 7.1 Ions 7.2 Ionic Bonds and Ionic Compounds 7.3 Bonding in Metals 1 Copyright Pearson Education, Inc., or its affiliates. All Rights Reserved. CHEMISTRY & YOU What
More informationProperties A Metal B Non- metal Electronic configuration?? Nature of oxides?? Oxidizing or reducing action?? Conduction of heat and electricity??
CLASS: X NCERT (CBSE) SCIENCE: Chemistry Page: 1 Question 1: Compare the properties of a typical metal and a non-metal on the basis of the following. Fill in Column A, B. Properties A Metal B Non- metal
More informationSAMPLE PAGES PAGES. Extraction of metals from metal oxides. mixture of iron sand and coal are heated as they move down kiln, by force of gravity
Unit 11.5 Metals and Non-metals Topic 3: Extraction of metals and corrosion In the previous two Topics we looked at the physical and chemical properties of metals. In Topic 3 we now examine how metals
More information17/05/2016 cgrahamphysics.com Extracting Metals
Extracting Metals Which country is the leading producer? Copper Philippines Chile Gold China Nickel Mexico Platinum Titanium Silver South Africa Australia Diamond Australia, Chile, China, Mexico, Philippines,
More informationAQA GCSE Design and Technology 8552
AQA GCSE Design and Technology 8552 1 Energy generation Unit 2 Energy, materials, systems and devices Objectives Understand how power is generated from fossil and nuclear fuels Understand how power is
More informationHistory of the Periodic Table
Periodic Trends History of the Periodic Table Many scientists suspected a pattern in the order of the elements, but were not able to exactly figure it out. Dmitri Mendeleev was the first to create an accurate
More informationEngineering Materials
Engineering Materials Module 1: Introduction to Engineering Materials PREPARED BY IAT Curriculum Unit August 2010 Institute of Applied Technology, 2010 2 Module 1: Introduction to Engineering Materials
More informationPage 1 of 15. Website: Mobile:
Question 1: Give an example of a metal which (i) is a liquid at room temperature. (ii) can be easily cut with a knife. (iii) is the best conductor of heat. (iv) is a poor conductor of heat. (i) Metal that
More informationContact us:
Class X Chapter 3 Metals and Non-metals Science Question 1: Give an example of a metal which (i) is a liquid at room temperature. (ii) can be easily cut with a knife. (iii) is the best conductor of heat.
More informationGeek weekly June 2016
1 1 Geek weekly June 2016 Blessed Ministry P.O. Box 2096 Madison, Al 35758 blessedministrieshsv@gmail.com http://blessedministryhsv.com 256-783-9943 1 A metal is one of the basic elements in nature. Of
More informationScheme of work Cambridge IGCSE Chemistry (0620)
www.xtremepapers.com Scheme of work Cambridge IGCSE Chemistry (0620) Unit 6: Metals and the Reactivity Series Recommended prior knowledge Knowledge on particle theory and atomic structure and the reaction
More information1. What are amphoteric oxides? Give two examples of amphoteric oxides.
1. What are amphoteric oxides? Give two examples of amphoteric oxides. Amphoteric oxides are the oxides, which react with both acids and bases to form salt and water. E.g. ZnO and Al 2 O 3. 2. Name two
More informationPESIT Bangalore South Campus Hosur road, 1km before ElectronicCity, Bengaluru -100 Department of Basic Science and Humanities
USN 1 P E PESIT Bangalore South Campus Hosur road, 1km before ElectronicCity, Bengaluru -100 Department of Basic Science and Humanities CONTINUOUS INTERNAL EVALUATION TEST-3 Date : 15/05/2018 Marks: 60
More informationWhat Are Metal Standards and Why Are They Important?
What Are Metal Standards and Why Are They Important? Table of Content Metallurgy101...3 Pure Metals...3 Component Metals...4 Characteristics of Metal Standards...5 Metal Standards and Testing Standards...6
More informationKey Points. ATOMIC STRUCTURE Atom: the smallest part of an element that still has the characteristics/ properties of that element.
The Periodic Table Learning Objective Red Yellow Green Date Completed OC3 understand what an element is and recall that all known elements are listed in the Periodic Table; (also know how to use the Table;
More informationGroup A Good Earth School Naduveerapattu Chemistry Worksheet Class X Metallurgy (1) Name a metal which has the following properties.
Group A Good Earth School Naduveerapattu Chemistry Worksheet Class X Metallurgy (1) Name a metal which has the following properties. 1. Is a liquid at ordinary temperatures. 2. Has a low boiling point
More informationMathematics and Science in Schools in Sub-Saharan Africa
Mathematics and Science in Schools in Sub-Saharan Africa MATERIAL SCIENCE METAL ALLOYS Metals have many advantages Strong Malleable Conductors Shiny Metal Customizing Cold-working and heat treating metals
More informationCopper is an element mineral called native copper. Found in chile, indonasia and USA. Also found in Loei and Khonkhan but not in much quantity.
COPPER Copper is an element mineral called native copper. Found in chile, indonasia and USA. Also found in Loei and Khonkhan but not in much quantity. Copper is an industrial metal widely used in unalloyed
More informationLOW HEAT INPUT WELDING ALLOYS
ASTRALOY 662 CHARACTERISTICS: An all position AC/DC electrode for high strength, crack free joining of low/medium carbon, and medium tensile steels of various compositions. Low alloy medium carbon steels,
More informationWorkshop Practice TA 102
Workshop Practice TA 102 Lec 2 & 3 :Engineering Materials By Prof.A.Chandrashekhar Engineering Materials Materials play an important role in the construction and manufacturing of equipment/tools. Right
More informationUse the arrow keys to easily navigate through the course.
STEEL Use the arrow keys to easily navigate through the course. Back Next 1 STEEL 2 A BRIEF HISTORY OF STEEL The history of steel is closely connected to the development of human culture and civilization.
More informationThe table below gives information about milk bottles. Raw materials Sand, limestone, salt Crude oil. Bottle material Soda-lime glass HD poly(ethene)
Q1.Plastic and glass can be used to make milk bottles. The figure below shows the percentage of milk bottles made from glass between 1975 and 2010. (a) Plot the points and draw a line on the figure above
More informationSteel Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore
Steel Haseeb Ullah Khan Jatoi Department of Chemical Engineering UET Lahore Recap Eutectic phase diagram Eutectic phase diagram Eutectic isotherm Invariant point Eutectic Reaction Compositions of components
More informationSteel Properties. History of Steel
History of Steel Steel Properties Cast Iron Cast iron preceded wrought iron. It is brittle, has high carbon content with low tensile strength. It has excellent casting properties. It was mainly used to
More informationStainless Steel St St Introduction
Stainless steel is not a single material but the name for a family of corrosion resistant steels. Like many scientific discoveries the origins of stainless steel lies in a serendipitous accident. In 1913
More informationNONFERROUS METALS AND ALLOYS
NONFERROUS METALS AND ALLOYS Chapter 7 7.1 Introduction Usage of nonferrous metals and alloys has increased due to technology Possess certain properties that ferrous materials do not have Resistance to
More informationChapter 11 Part 2. Metals and Alloys
Chapter 11 Part 2 Metals and Alloys Nomenclature of Steels Historically, many methods for identifying alloys by their composition have been developed The commonly used schemes in this country are those
More informationChapter 3: Metals and Non-metals Question 1: Define amphoteric oxides. Give two examples. Answer: Oxides that react with both acids and bases to form
Chapter 3: Metals and Non-metals Question 1: Define amphoteric oxides. Give two examples. Oxides that react with both acids and bases to form salt and water are known as amphoteric oxides. Examples: PbO
More informationMachinability is the ease with which a given material may be worked with a cutting tool
Machinability Machinability is the ease with which a given material may be worked with a cutting tool Machinability ratings (MR) provide and understanding of the severity of a metalworking operation in
More informationTechnology Education Grade 7 Review Packet #2-3D Printing, Plastics & Metallurgy D Printing
Scarsdale Middle School Technology Education Mr. Rambone Name Technology Education Grade 7 Review Packet #2-3D Printing, Plastics & Metallurgy -------------------------------------------------------- 3D
More informationCHAPTER 3 METALS AND NON-METALS About 118 elements are known today. There are more than 90 metals, 22 non metals and a few metalloids. Sodium (Na), potassium (K), magnesium(mg), aluminium(al), calcium(ca),
More informationTAP 229-2: Introduction to materials selection charts
TAP 229-2: Introduction to materials selection charts Mechanical properties in physics, and design Materials selection charts are a novel graphical way of presenting material property data. Most mechanical
More informationProperties of Metals and Alloys
Properties of Metals and Alloys 1 of 19 Boardworks Ltd 2016 Properties of Metals and Alloys 2 of 19 Boardworks Ltd 2016 What is the structure of metals? 3 of 19 Boardworks Ltd 2016 Metal particles are
More informationWhat is Steel? Prepared By: John Cawley
What is Steel? Prepared By: John Cawley Presentation Objectives Describe the composition of steel. Identify the differences between steel and iron. Use the steel numbering system to identify various types
More informationProperties of metals
For more awesome resources, visit us at www.savemyexams.co.uk/ Properties of metals Question Paper Level IGSE Subject hemistry (060/097) Exam oard ambridge International Examinations (IE) Topic Metals
More informationMetals. N4 & N5 Homework Questions
St Peter the Apostle High School Chemistry Department Metals N4 & N5 Homework Questions Answer questions as directed by your teacher. National 4 level questions are first followed by National 5 level questions.
More informationMetals in building. Introduction. Joining metals. Metals have the following properties:
Metals in building Introduction Metals have the following properties: malleability able to be hammered or ductility drawn out as wire able to be melted and formed into shapes in moulds. most metals can
More informationINTRODUCTION. Think HSS
INTRODUCTION Think HSS SUMMARY METALLURGY 2 Excellent strength 3 A super sharp edge 4 Safe and reliable tools Alloy elements 6 The influence of alloy elements 7 Standard compositions of HSS 8 The HSS-PM
More informationMetals and Non-metals
Metals and Non-metals Q.1. Define amphoteric oxides. Give two examples. Oxides that react with both acids and bases to form salt and water are known as amphoteric oxides. Examples: PbO and Al2O3. Q.2.
More informationMATERIALS AND TECHNOLOGY
S56 Coimisiún na Scrúduithe Stáit State Examinations Commission JUNIOR CERTIFICATE EXAMINATION, 2006 MATERIALS AND TECHNOLOGY METALWORK - ORDINARY LEVEL 100 Marks Tuesday, 20 June, Afternoon, 00 to 30
More informationStainless Steel - St St Introduction
Stainless steel is not a single material but the name for a family of corrosion resistant steels. Like many scientific discoveries the origins of stainless steel lies in a serendipitous accident. In 1913
More informationSTEEL- A CONSTRUCTION
STEEL- A CONSTRUCTION MATERIAL GROUP MEMBERS -Aayush nair -Anushka Juneja -Bhavya Soni -Dhruvi Galiara -Harshil Shah -Nishikesh Tathe 14SA105 14SA110 14SA117 14SA123 14SA126 14SA156 ORIGIN Steel has been
More informationIron is found in an oxidized state and is mined from the ground as an iron ore.
Iron is found in an oxidized state and is mined from the ground as an iron ore. Energy is used to convert this iron oxide into steel. Ore is loaded into a blast furnace where heat energy removes the oxygen
More informationThe Technological World. Chapter 12
The Technological World Chapter 12 Chapter 12 Manufacturing Technical Objects There have been many inventions that have improved the quality of our lives. We will refer to these inventions as technical
More informationลวดเช อมพ เศษ. Weld Mold / USA. Tool and Die Alloy Welding Materials
ลวดเช อมพ เศษ Weld Mold / USA Tool and Die Alloy Welding Materials High-strength alloys for bearing surfaces and tools that must work-harden, for the joining of cracked die sections and for applications
More informationMetals And Their Properties- Physical and Chemical
Metals And Their Properties- Physical and Chemical All the things around us are made of 100 or so elements. These elements were classified by Lavoisier in to metals and non-metals by studying their properties.
More informationTheir widespread use is accounted for by three factors:
TYPES OF METAL ALLOYS Metal alloys, by virtue of composition, are often grouped into two classes ferrous and nonferrous. Ferrous alloys, those in which iron is the principal constituent, include steels
More informationNatural Science and Technology Grade 5 Term 2
1 Natural Science and Technology Grade 5 Term 2 Matter and materials and processing Contents Topic 6: Metals and non-metals... 3 Unit 1: Properties of metals... 3 What are metals?... 3 General properties
More informationStudent Activity: Identifying Matter
When you have completed this activity, go to Status Check. Physical Science A Unit 1 Student Activity: Identifying Matter Name Date Objectives In this activity, you will: evaluate data on different physical
More informationME -215 ENGINEERING MATERIALS AND PROCESES
ME -215 ENGINEERING MATERIALS AND PROCESES Instructor: Office: MEC325, Tel.: 973-642-7455 E-mail: samardzi@njit.edu PROPERTIES OF MATERIALS Chapter 3 Materials Properties STRUCTURE PERFORMANCE PROCESSING
More informationENGINEERING COUNCIL CERTIFICATE LEVEL ENGINEERING MATERIALS C102 TUTORIAL 2 THE STRUCTURE OF MATERIALS
ENGINEERING COUNCIL CERTIFICATE LEVEL ENGINEERING MATERIALS C102 TUTORIAL 2 THE STRUCTURE OF MATERIALS OUTCOMES On successful completion of the unit the candidate will be able to: 1. Recognise the structures
More information1. Hardness 2. Streak 3. Density 4. Crystal structure 5. A mineral must be a naturally occurring, inorganic. 7. c 8. f 9. a 10. d 11. g 12. e 13.
Properties of Guided Reading and Study Use Target Reading Skills Properties of I. What Is a Mineral? A. Naturally Occurring B. Inorganic C. Solid D. Crystal Structure E. Definite Chemical Composition II.
More informationNatural Science. and. Technology. Grade 5
1 Natural Science and Technology Grade 5 2 Contents Topic 6 Metals and Non-metals Unit 1 Properties of metals Unit 2 Properties of non- metals Topic 7 Uses of metals Unit 1 Other properties of metals Unit
More informationAlloy Steels. Chapter 7. Copyright 2007 Dr. Ali Ourdjini.
7 Alloy Steels At the end of this lesson students should be able to: Classify alloy steels Explain: effects of alloying elements to steel properties Discuss: composition, microstructure, mechanical properties
More informationCorrosion and batteries
Corrosion and batteries Corrosion is a process of gradual destruction of metal from its surface due to its unwanted chemical or electrochemical interaction of metal. Ore of metal which is stable and is
More informationPlasma Heat and Surface Treatment
Plasma Heat and Surface Treatment Plasmait is a supplier of heat and surface treatment solutions based on plasma technology. We design, build, deploy and support production machinery for continuous and
More informationProperties of Metals
Properties of Metals Alessandro Anzalone, Ph.D. Hillsborough Community College Brandon Campus 1. Mechanical Properties 2. Physical Properties 3. Metallurgical Microscopy 4. Nondestructive Testing 5. References
More informationCoimisiún na Scrúduithe Stáit State Examinations Commission
M72 Coimisiún na Scrúduithe Stáit State Examinations Commission LEAVING CERTIFICATE EXAMINATION, 2006 ENGINEERING - MATERIALS AND TECHNOLOGY (Ordinary Level - 200 marks) FRIDAY, 23 JUNE, MORNING 9.30 12.00
More informationTechnology Education Grade 7 Review Packet #2-3D Printing, Plastics & Metallurgy D Printing
Scarsdale Middle School Technology Education Mr. Rambone Name Technology Education Grade 7 Review Packet #2-3D Printing, Plastics & Metallurgy -------------------------------------------------------- 3D
More informationConnexion Developments Ltd + Solenoid Valves (UK) Ltd Unit 3, Rainbow Court, Armstrong Way, Great Western Business Park, Yate, Bristol, BS37 5NG,
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 THERMOPLASTICS & ELASTOMERS ABS Acrylonitrile Butadiene Styrene Class 32222 conforming to ASTM D3965 is a time-proven material. The smooth
More informationWe have a good understanding of the markets we operate in; we understand the products and production processes, we understand the needs of the
Who we are 2 We are a non-ferrous metals merchant set up in early 2016 by its management with offices in Singapore, Hong Kong, Switzerland and Shanghai. We are expanding our presence through new offices
More informationAlloy Steels. Engineering Materials. Introduction : Msc. Shaymaa Mahmood
Alloy Steels Introduction : Steels are, essentially, alloys of iron and carbon, containing up to 1.5 % of carbon. Steel is made by oxidizing away the impurities that are present in the iron produced in
More informationThe table gives some information about a family of molecules in crude oil. Show information from the table in the most appropriate way on the grid.
## The table gives some information about a family of molecules in crude oil. NUMBER OF CARBON ATOMS IN MOLECULE MASS OF MOLECULE (atomic units) 1 16 2 30 4 58 Show information from the table in the most
More informationGCSE BITESIZE Examinations
GCSE BITESIZE Examinations General Certificate of Secondary Education AQA SCIENCE A CHY1A Unit Chemistry C1a (Products from Rocks) AQA Chemistry Unit Chemistry C1a (Products from Rocks) FOUNDATION TIER
More informationHSS rolled. HSS ground. HSS Co 5 ground. HSS-TiN ground. Twist drills DIN 338 type N. Point cuts:
Twist drills DIN 338 type N High performance twist drill suitable for all normal drilling in conventional materials. Point cut: helical point Helix angle: 20-30 tolerance: h8 Right-hand cutting 1,0 up
More informationWJEC England GCSE Chemistry. Topic 11: Production, use and disposal of important chemicals and materials. Notes
WJEC England GCSE Chemistry Topic 11: Production, use and disposal of important chemicals and materials Notes (Content in bold is for Higher Tier only) The Haber process Used to manufacture ammonia, which
More information