TECHNICAL SPECIFICATION Conductive Elastomer Extruded Gaskets
|
|
|
- Roy Sanders
- 6 years ago
- Views:
Transcription
1 Pag. 1/10 TECHNICAL SPECIFICATION Conductive Elastomer Extruded Gaskets Electrically conductive silicone gaskets are manufactured in different standard profiles and upon client request, in silicone and fluorosilicone, loaded with conductive fillers such as Nickel Graphite, Silver Aluminium, Silver Copper, etc The material is identified among those listed above based upon the resistance to corrosion characteristics and the shielding level required. The characteristics that define the choice of materials are: IP 65/66/67 sealing grade; minimum and maximum temperature; type of assembly: the compressibility of the material and its elastic recovery; number of pieces to be produced; the consequent choice of tools and equipment; the need for a sample for shielding trials; UL 94 fire resistance; EMP and Tempest requirements (blends according to MIL-G-83528). Applications Conductive silicone gaskets are utilized to obtain a combination of electromagnetic shielding and IP environmental sealing, also in critical situations. Materials according to MIL-G for use in military and industrial field. Provision In rolls or pieces cut to size. Standard section (par.3) or custom section to produce on client drawing.
2 Pag. 2/10 1. Material Electrically conductive extruded profiles are composed of 2 components: Elastomer Binder Conductive filler Silicone Excellent high and low temperature properties. Fair physical properties ELASTOMER BINDER Fluorosilicone Resistant to oils and solvents of fluorinated rubber. Good for special applications where general resistance to oxidizing chemicals, aromatic and chlorinated solvent bases are required Typical Elastomer Fluid Resistance Fluid Silicone Fluorosilicone High Temperature Excellent Good Low Temp Excellent Excellent ASTM 1 Oil Fair/Good Good Hydraulic Fluids (Phosphate Ester) Poor Poor Hydrocarbon Fuels Poor Good Ozone, Weather Good Good STB (NBC Decontamination Fluid) Poor Fair/Good Dilute Acids Fair Good FREQUENCY TYPICAL SHIELDING EFFECTIVENESS (db) Silver TEST METHOD Silver Nickel Silver Glass Aluminum Silver Copper 200 KHz (H) MIL G MHz (E) MIL G MHz (E) MIL G GHz (Plane Wave) MIL G Nickel Graphite 10 GHz (Plane Wave) MIL G These are typical values, to know the specific values of the compounds mentioned in par. 3, even beyond 10 GHz, please contact directly our technical department
3 Pag. 3/10 2. Environmental Compatibility ENCLOSURE MATERIAL : Good : Satisfactory : Not Recomended Aluminium alloys Magnesium Alloys Stainless Steel Copper Alloys Cadmiun plating Tin Plating Nickel Plating Chromium plating Silver Plating Zinc Plated Galvanized Steel FILLER TYPE Pure Silver Silver Aluminium Silver Copper Silver Glass Nickel Graphite Titanium
4 Pag. 4/10 3. Elastomer characteristics Codice Elastomer binder Conductive filler Color Hardness (Shore A) +/-5 ASTM S2240 Specific Gravity (g/cm3) +/-5% ASTM D792 Max Volume Resistivity (Ohm-cm) ASTM D991 Min Elongation (%) ASTM D412 MinTensile PSI (PSI) ASTM D412 Operating Temperature Range ( C) Flammability rating AGNIS1 Silicone Silver Nichel Tan 65,0 4,32 0, ,0 181, N/A 30,0 AGALS1 Silicone Silver Aluminum Tan 70,0 2,11 0, ,0 130, N/A 30,0 AGALS2 Silicone Silver Aluminum Tan 65,0 2,00 0, ,0 130, N/A 30,0 AGCUS1 Silicone Silver Copper Tan 75,0 3,32 0, ,0 181, N/A 30,0 AGCUS2 Silicone Silver Copper Tan 60,0 3,02 0, ,0 145, N/A 30,0 AGGLS1 Silicone Silver Glass Tan 65,0 1,85 0,050 60,0 80, N/A 30,0 AGGLS3 Silicone Silver Glass Tan 65,0 1,80 0,005 75,0 51, N/A 30,0 AGGLS4 Silicone Silver Glass Tan 60,0 7,75 0,05-0,1 80,0 130, N/A 30,0 NIGS2 Silicone Nickel Graphite Gray 80,0 2,45 0, ,0 290, N/A 30,0 NIGS3 Silicone Nickel Graphite Gray 60,0 1,99 0,1-0,5 100,0 145, N/A 30,0 NIGSUL5 Silicone Nickel Graphite Gray 60,0 2,14 0,1-0,5 100,0 145, UL 94-V1 35,0 NIGSUL8 Silicone Nickel Graphite Gray 75,0 2,30 0,05-0,1 125,0 203, UL 94-V1 30,0 AGNIF2A Fluorosilicone Silver Nickel Tan 80,0 4,60 0, ,0 181, N/A 30,0 AGCUF2B Fluorosilicone Silver Copper Tan 75,0 5,00 0, ,0 181, N/A 30,0 AGALF2D Fluorosilicone Silver Aluminum Light Green 70,0 2,70 0, ,0 80, N/A 30,0 NIGFJ Fluorosilicone Nickel Graphite Dark Green 80,0 3,25 0, ,0 108, N/A 30,0 NIGS390 Silicone Nickel Graphite Dark Gray 70,0 2,37 0, ,0 217, N/A 30,0 CARBON-S Silicone Carbon Black 70,0 1,19 9, ,0 725, N/A 20,0 Table 1: Elastomer Characteristics Compression Set (%) ASTM D395
5 Pag. 5/10 4. Standard Section NOTE: General tolerances are +/-0.15 mm, or specified in the technical documentation SOLIANI REF. SO SOLIANI REF. SH O SECTION SOLIANI Ref. A (mm) SOLIANI Ref. A(mm) SP SP SP SP HOLLOW O SECTION SOLIANI Ref. A(mm) B(mm) 467** SP* ** ,03 1, ** SP *made of AGALS1 **MADE OF NIGS2
6 Pag. 6/10 D SECTION SOLIANI REF. SD SOLIANI Ref. A(mm) B(mm) r(mm) HOLLOW D SECTION SOLIANI REF. SDH SOLIANI REF. SF SOLIANI Ref. A(mm) B(mm) C(mm) r(mm) ,00 12, ,00 15,00 1,50/1,80 5, ,00 10,00 1,65 9,00 FLAT STRIP SECTION SOLIANI Ref. A(mm) B(mm)
7 Pag. 7/10 CHANNEL SECTION SOLIANI REF. SU SOLIANI Ref. A(mm) B(mm) C(mm) D(mm) HOLLOW P SECTION SOLIANI REF. SL SOLIANI Ref. A(mm) B(mm) C(mm) D(mm) HOLLOW RECTANGULAR SECTION SOLIANI REF. SR SOLIANI Ref. A(mm) B(mm) C(mm) HOLLOW SPECIAL SECTION 1 SOLIANI REF. SP SOLIANI Ref. A(mm) B(mm) C(mm) D(mm)
8 Pag. 8/10 HOLLOW SPECIAL SECTION 2 SOLIANI REF. SP SOLIANI Ref. A(mm) B(mm) C(mm) D(mm) E (mm) HOLLOW SPECIAL SECTION 3 SOLIANI REF. SP SOLIANI Ref. A(mm) B(mm) C(mm) D(mm) HOLLOW SPECIAL SECTION SKETCH 1 ( TOOL NOT AVAILABLE) SOLIANI REF. SP SOLIANI Ref. SK951 HOLLOW SPECIAL "Ω" SECTION SOLIANI REF. SP SOLIANI Ref. A(mm) B(mm) C(mm) D(mm) E (mm)
9 Pag. 9/10 SOLIANI REF. SP HOLLOW SPECIAL SECTION SKETCH 2 SOLIANI Ref. SK986 SOLIANI REF. SP DUO SEAL SECTION SOLIANI Ref. A(mm) B(mm) SOLIANI REF. SP SOLIANI Ref.753
10 Pag. 10/10 5. Extruded Jointed gaskets Extruded profiles can be mitre jointed to ease assembly and prevent leakage (both RF and Environmental). Extruded profiles can be butt jointed in the form of O rings to ease assembly, prevent emissions, susceptibility and effects on environmental sealing. EXAMPLE OF P/N CONFIGURATION: SO.018.NIGS3 means extruded round cross section 2.84 mm diameter, made of silicone Nickel Graphite NIGS3. SO.018.NIGS3.L400 means extruded round cross section 2.84 mm diameter, made of silicone Nickel Graphite NIGS3, cut to length 400 mm. PB700.O.927.SO.018.NIGS3 means extruded round cross section 2.84 mm diameter, made of silicone Nickel Graphite NIGS3, butt jointed Developed length 927 mm. PB700.F SP.759.NIGS3 means extruded cross section shape 759, made of silicone Nickel Graphite NIGS3, mitre jointed as per customer drawing 500x500 mm outer size.
TECHNICAL SPECIFICATION Conductive Elastomer Molded Gaskets
Pag. 1/6 TECHNICAL SPECIFICATION Conductive Elastomer Molded Gaskets This category of items is in continuous evolution. The raw material from which it is made is the first component that must be analyzed
CORROSION-RESISTANT SILICONE GASKETS
CORROSION-RESISTANT SILICONE GASKETS 2 www.getelec.com 43 CORROSION-RESISTANT SILICONE GASKETS Guide to corrosion-resistant conductive materials by industry sector GETELEC has been developing its own MIL
CORROSION-RESISTANT SILICONE GASKETS
CORROSION-RESISTANT SILICONE GASKETS CORROSION-RESISTANT SILICONE GASKETS 63 GETELEC - 375 avenue Morane Saulnier - CS 34030-78535 Buc Cedex - France Tel. +33 1 39 20 42 42 - Fax: +33 1 39 20 42 43 - Email:
& CHO-SIL Conductive Elastomers
CONDUCTIVE ELASTOMERS CHO-SEAL & CHO-SIL Conductive Elastomers Since 1961, Chomerics has invented and extended virtually every aspect of conductive elastomer materials technology from the earliest silver
Conductive Elastomers
Elastomer is an exceptional versatile EMI shield material providing extremely low contact resistance between mating surfaces. By loading highly conductive metal fillers into silicone or fuel resistant
EMI ESSENTIALS ELECTROSEAL CONDUCTIVE ELASTOMER MATERIAL
ELECTROSEAL CONDUCTIVE ELASTOMER MATERIAL SHEET MATERIAL The Table below lists thicknesses and sizes for our molded sheet material, while Table 3, page 82, shows the compounds available for all of our
EMI Conductive Elastomer CSM Series
TDS EMI Shielding Material V.A. EMI Conductive Elastomer CSM Series Product Technical Datasheet General Introduction The electrically conductive elastomers are composed by adding conductive particles into
Conductive Elastomers
Electrically Conductive Elastomers EMC and Thermal Management Solutions Fothershield UNIT 3 GORRELLS WAY, TRANPENNINE TRADING ESTATE, ROCHDALE, LANCS, UK. OL11 2PX E info@fothershield.co.uk T + 44 (0)1706
HISTORY STATE OF THE ART MANUFACTURING METHODS ALL THE BENEFITS OF A LARGE BUSINESS FROM A SMALL FAMILY OWNED BUSINESS
HISTORY SAS Industries, Inc. (SAS) has been producing gasketing products for all industries since 1973. In 1987 after noticing the lack of market options for EMI/RFI Shielding Materials SAS began to develop
Conductive Elastomer EMI Gaskets. Molded and Extruded Materials Selection Guide. Chomerics ENGINEERING YOUR SUCCESS.
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Conductive Elastomer EMI Gaskets Molded and Extruded Materials Selection
TechSIL CONDUCTIVE ELASTOMERS
TechSIL ONDUTIVE ELSTOMERS Introduction EMI Shielding Gaskets for Electronic Enclosures Shielding gaskets are, very simply, connectors of two opposing metallic planes which make them appear as one continuous
Shielding Effectiveness Measurement of EMI Gaskets and Flange Treatments Subjected to Salt Fog Exposure (20 x 20 Aperture)
CHO-TM201 July/1992 Shielding Effectiveness Measurement of EMI Gaskets and Flange Treatments Subjected to Salt Fog Exposure (20 x 20 Aperture) Prepared By: David C. Inman Test Service Technical Manager
Elastomeric EMI Shielding Solutions
Elastomeric EMI Shielding Solutions ET lectrically conductive elastomers provide environmental sealing, and excellent mechanical and electromagnetic shielding properties. They are ideal for applications
Elastomeric EMI Shielding
Elastomeric EMI Shielding Solutions Innovative Technology for a Connected World ANTENNAS & RECEPTION WIRELESS REMOTE CONTROL EMI SOLUTIONS THERMAL MANAGEMENT WIRELESS M2M & TELEMATICS ABOUT LAIRD TECHNOLOGIES
Elastomeric EMI Shielding
Elastomeric EMI Shielding SOLUTIONS ABOUT LAIRD TECHNOLOGIES Laird Technologies designs and manufactures customized, performance-critical products for wireless and other advanced electronics applications.
We practice environmental protection. Elastomeric EMI Shielding Solutions
We practice environmental protection Elastomeric EMI Shielding Solutions ET lectrically conductive elastomers provide environmental sealing, and excellent mechanical and electromagnetic shielding properties.
Elastomeric EMI Shielding SOLUTIONS
Elastomeric EMI Shielding SOLUTIONS ABOUT LAIRD Laird designs and manufactures customized, performance-critical products for wireless and other advanced electronics applications. The company is a global
Extruded EMI Gaskets Products & Custom Solutions Catalog. Chomerics ENGINEERING YOUR SUCCESS.
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Extruded EMI Gaskets Products & Custom Solutions Catalog Chomerics
Come And Visit Us At: UNIT 2, ASHBURTON INDUSTRIAL ESTATE ROSS-ON-WYE, HEREFORDSHIRE HR9 7BW.
E M TCS Come And Visit Us At: www.tcshielding.com UNIT 2, ASHBURTON INDUSTRIAL ESTATE ROSS-ON-WYE, HEREFORDSHIRE HR9 7BW Tel. 01989 563941 Fax. 01989 566874 email: sales@tcshielding.com Company Profile
MESH STRIP Metal Mesh EMI Gasketing
MESH STRIP Metal Mesh EMI Gasketing Customer Value Proposition: MESH STRIP gaskets are cost effective, resilient, highly conductive, knitted wire mesh strips used to provide electromagnetic interference
Transfer Impedance Test Method. & Conclusion
Part 3 of 3: Transfer Impedance Test Method & Conclusion Educational Seminar 3-1 by George M. Kunkel Spira Manufacturing Corporation www.spira-emi.com Transfer Impedance Test Method per SAE, ARP-1705,
global solutions : local support Knitted Conductive EMI Gaskets
global solutions : local support Knitted Conductive EMI Gaskets engineered antenna, emi, telematics and thermal applications Laird Technologies is committed to providing the world s leading OEMs with comprehensive
Beryllium Copper (BeCu) Fingerstrip Gaskets
Beryllium Copper (BeCu) Fingerstrip Gaskets EMC and Thermal Management Solutions Fothershield UNIT 3 GORRELLS WAY, TRANSPENNINE TRADING ESTATE, ROCHDALE, LANCS, UK. OL11 2PX E info@fothershield.co.uk T
Since 1968, our expertise and innovation and our customers' satisfaction have been at the heart of Getelec's business.
EDITORIAL Since 1968, our expertise and innovation and our customers' satisfaction have been at the heart of Getelec's business. Your satisfaction has been our raison d'être for nearly 45 years. Unwaveringly
Electromagnetic Compatibility EMC Components and Gaskets for RFI/EMI Shielding
Electromagnetic Compatibility EMC Components and Gaskets for RFI/EMI Shielding For the latest up to date information and news please visit our web site 1 Introduction Exceptional EMC shielding and environmental
Beryllium-Copper Gaskets
STOCK SPRING-LINE Beryllium-Copper Gaskets SPRING-LINE Beryllium-Copper Gaskets SPRING-LINE beryllium-copper gaskets combine high levels of EMI shielding effectiveness with springfinger wiping and low
KNITTED CONDUCTIVE EMI GASKETS
KNITTED CONDUCTIVE EMI GASKETS CAPABILITIES At Laird Technologies our commitment to providing design engineers with a variety of solutions for controlling electromagnetic leakage is evident in the knitted
Connexion Developments Ltd + Solenoid Valves (UK) Ltd Unit 3, Rainbow Court, Armstrong Way, Great Western Business Park, Yate, Bristol, BS37 5NG,
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 THERMOPLASTICS & ELASTOMERS ABS Acrylonitrile Butadiene Styrene Class 32222 conforming to ASTM D3965 is a time-proven material. The smooth
RITES Lab, Western Region, 210, Amit Industrial Estate, 61, Dr. S.S. Rao Road, Parel, Mumbai, Maharashtra
Last Amended on - Page 1 of 5 I. METALS & ALLOYS 1. Low-Alloy Steel Carbon ASTM E 415-08/ Manganese ASTM E 415-08/ Silicon ASTM E 415-08/ Sulphur ASTM E 415-08/ Phosphorous ASTM E 415-08/ Chromium ASTM
Spira s Connector-Seal Gaskets
s Connector-Seal Gaskets offers the best Connector-Seal gaskets on the market, providing an excellent, durable and reusable EMI and/or Environmental seal in flange-mounted connectors for the life of a
Leak Detectors, Lubricants, and Sealants
www.swagelok.com Leak Detectors, Lubricants, and Sealants Products Snoop liquid leak detectors Goop thread lubricants SWAK, PTFE Tape, and PTFE-Free pipe thread sealants 2 Leak Detectors, Lubricants, and
CARBON-GRAPHITE PRODUCTS PERMA-FOIL Graphite Sheet
CARBON-GRAPHITE PRODUCTS Graphite Sheet (1) (2) (3) (1) Roll Products (2) Punching Processed Product Samples (3) Punching Processed Product Samples Features of is a generic term for the flexible graphite
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD. ANSI/SCTE (Formerly IPS SP 100)
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 15 2006 (Formerly IPS SP 100) Specification for Trunk, Feeder and Distribution Coaxial Cable NOTICE The Society
Rubber 101: How to Choose Elastomers
While there are many formulations or recipes of rubber available, the following text contains essential information to assist you in choosing the elastomer that will work best for your project. If you
3M Electrically Conductive Adhesive Transfer Tape 9707
Technical Data May 2014 3M Electrically Conductive Adhesive Transfer Tape 9707 Product Description 3M Electrically Conductive Adhesive Transfer Tape (ECATT) 9707 is a pressure sensitive adhesive (PSA)
EMI/RFI/ESD SHIELDING
EMI/RFI/ESD SHIELDING DESIGN, DEVELOPMENT, ND MNUFCTURING MDE FROM CONDUCTIVE ELSTOMERS, METLIZED FBRICS, ND WIRE MESH - MOLDED COVERS/PLTE SELS - CUSTOM MOLDED COMPONENTS - MOLDED ND STMPED GSKETS - MOLDED
FINGERSTOCK GASKETS. Physical Characteristics. Specific weight: 8.4g/cm 3 Melting point: 900 C Coefficient to expansion:
FINGERSTOCK GASKETS Application Due to their outstanding material and electrical characteristics, beryllium copper finger of different shapes and dimension are used in the following industries: Broadcasting,
Gasket Material Type - Galvanic compatablity and Voltage differential
Galvanic relationship of Metals Gasket Material Type - Galvanic compatablity and Voltage differential Group Metallurgical Category EMF (Volt) Graphite Silver Glass Silver Aluminium Nickel Monel Stainless
MIL-DTL Series I Connectors
RUGGED Self-locking bayonet coupling system 100% scoop proof 500-mating-cycle durability Excellent shock and vibration resistance Environmentally sealed and hermetic versions available VERSATILE Available
Zippertubing (Japan), Ltd.
Manufactured by Sold by Vanguard (Japan), Co., Ltd. Zippertubing (Japan), Ltd. East sales office TEL +81-3-3544-0096 West sales office TEL +81-6-6457-3135 2013.12 High Shielding Performance Water and Drip-Proof
STAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
PTFE semi-finished products and finished parts
Material characteristics PTFE = Polytetrafluorethylene PTFE is excellently suited as a construction material for the chemicals industry. It temperature resistance ranges from -190 C to +250 C, and it can
Conductive Elastomer Extruded Strips
Conductive Elastomer Extruded Strips Extruded Strips Chomerics extruded conductive elastomer gaskets are solid and hollow strips which are available in a variety of cross section configurations. Sizes
The industrial distribution market needs top quality silicone sealants, lubricants and related products at a reasonable price in a timely manner.
PRODUCT GUIDE Silicone Sealants Silicone Compounds Silicone Greases Anti-Seize Pastes Aerosol Lubricants Silicone Fluids Contract Packaging Private Label Turnkey Packaging The industrial distribution market
Bellofram Silicones Inc Ohio River Boulevard Newell, West Virginia Toll-free: Fax:
TM Silicones Bellofram Silicones Inc. 8019 Ohio River Boulevard Newell, West Virginia 26050 www.belloframsilicones.com Bellofram Closed Cell Silicone Sponge Extrusion Products Bellofram Silicones closed
Form-in-Place Conductive Gasket
Form-in-Place Conductive Gasket Design Guidelines Material Specifications Jim Skelly President Cybershield 308 Ellen Trout Drive Lufkin, TX 75904 Tel: 214-227-3680 Email: jim.skelly@cybershieldinc.com
Extended-Frequency SMA Connectors
Extended-Frequency SM Connectors Extended-Frequency SM Connectors This brochure introduces two new series of connectors that extend SM performance beyond the MIL-PRF-39012 upper frequency limit of 18 GHz,
Features Conductive Room Temperature Cure. Product Ref IP 4525IP Low viscosity adhesive & coating. High thermal conductivity
Properties and Part Selection Overview Selection Table - Epoxy-Based Adhesive Properties Features Conductive Room Temperature Cure Product Ref 120 132 4461IP 42IP 438 700 Properties High electrical conductivity
Light Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
EMI Shielding Foam Gasket
www.nkcorp-inc.com NK CORPORATION INC. Acoustic Damping & Insulation Cleanroom Product EMI Conductive Elastomer EMI Shielding Molded & Extruded Rubber Thermal Management RFI Absorption 01 EMI Shielding
FLANGEINSULATION. COBALCH Flange Insulation provides a possibility to convert a normal flange connection to an
FLANGEINSULATION COBALCH Flange Insulation provides a possibility to convert a normal flange connection to an ELECTRICALLY INSULATION Flange Connection COBALCH Flange Insulation is not only suitable for
Heat Curing Application Methods. Fastelek Temp. Optimal Heating Temp o F to 270 o F 3 ~ 10 seconds 6 ~ 8 seconds 20 ~ 30 seconds
Fastelek is a customizable heat activated electrically conductive adhesive available in a few performance fillers, thicknesses and phase-change (melt point) temperatures. Fastelek is designed to adhere
Silicone Rubber Sheet
Silicone Rubber Sheet High grade silicone.generally resistant to moderate or ozidizing chemicals,ozone,concentrated sodium hydroxide. Standard Size : 1M X 2M (Width by Length) 2 M Any length longer than
Table of CONTENTS AB AB AB AB BLAST - REGULAR SECTION 2 : SBR (Packing and Skirtboard)...2.
(4-2-202) Table of CONTENTS SECTION : NATURAL (NR)... SECTION 7 : FABRIC REINFORCED RUBBER...7. AB-3... AB-35...2 AB-37...3 AB-38...4 BLAST - REGULAR...5 C.I. PACKING AB-95...7. IM-950...7.2 AB-984...7.3
RUBBER MATERIAL COMMERCIAL and MIL SPEC
RUBBER MATERIAL COMMERCIAL and MIL SPEC NEOPRENE BUNA-N FDA BUNA-N VITON EPDM SILICONE CLOTH INSERTED RUBBER NYLON INSERTED RUBBER RED RUBBER PURE GUM CLOSED CELL SPONGE OPEN CELL SPONGE CORK and RUBBER
Aero s experienced sales engineers stand ready to guide you towards the best solution for your specific requirements.
While there are many formulations or recipes of rubber available, the following text contains essential information to assist you in choosing the elastomer that will work best for your project. If you
EMC & RFI Products. EMC & RFI Products. OEM Electrical Insulation Tapes. OEM Liquid Resins. Heat Shrink
EMC & RFI Products For more than 40 years 3M Company has been one of the foremost sources of effective electromagnetic compatible (EMC) solutions. Many of the world s leading electronic and electrical
Uni-Seals Product Catalog
Uni-Seals Product Catalog www.uni-seals.com 0 Index Spiral Wound Gaskets GA9100 Spiral wound gasket. 3 GA9101 Spiral wound gasket basic style. 3 GA9102 Spiral wound gasket with inner ring. 3 GA9103 Spiral
SILVER LINE BUILDING PRODUCTS. Series 1700 Heavy Commercial Aluminum Double Hung. HC65 48 x84 / HC50 60 x96 Replacement Window
DIVISION 08 / SECTION 08505 METAL WINDOWS SILVER LINE BUILDING PRODUCTS SPECIFICATIONS: GENERAL Series 1700 Heavy Commercial Aluminum Double Hung 1. SECTION INCLUDES 2. RELATED SECTIONS 3. QUALITY ASSURANCE
ISMAT SPECIFICATIONS
ISM-FKM-7512 Technical Datasheet ISM-FKM-7512 base polymer is an Engineering purpose Fluorocarbon compound. FKM O Rings can be used in petroleum products and solvent resistant applications such as Valve
ATI 201 HP /ATI 201L HP
Stainless Steel: Austenitic (UNS S20100 and S20103) GENERAL PROPERTIES and L austenitic stainless steels belong to the 200 series of Cr-Mn-Ni stainless alloys, which are similar to the 300 series of Cr-Ni
OETIKER. Technical Data Sheet. 1-Ear Clamps. 1-Ear Clamps with Insert. 2-Ear Clamps. Connecting Technology. Dimple. Ear. Ear width.
OETIKER width Technical Data Sheet 1- Clamps Product Group 153 Insert width 1- Clamps with Insert Product Group 154 width (Double clamping range) 2- Clamps Product Group 101 & 151 Connecting Technology
SPECIFICATION FOR NICKEL ALLOY FORGINGS
SPECIFICATION FOR NICKEL ALLOY FORGINGS 01 (Identical with ASTM Specification B 564-00 except that certification has been made mandatory.) 1. Scope 1.1 This specification covers forgings of nickel alloy
GASKET ASME Standards
GASKET GASKET A gasket is a mechanical seal which fills the space between two or more mating surfaces, generally to prevent leakage while under compression. Gaskets allow perfect mating surfaces on machine
Specification Product Form ASTM ASME AMS Federal or Military Plate, Sheet and Strip B 127 SB QQ-N-281 B 163 B165 B164 B564
ATI 400 Nickel-Base Alloy (UNS N04400) INTRODUCTION ATI 400 alloy (UNS N04400) is a ductile nickel-copper alloy with resistance to a variety of corrosive conditions. The alloy is most frequently applied
PERMABOND HH190 High Strength, High Viscosity Anaerobic Gasketmaker
PERMABOND HH190 High Strength, High Viscosity Anaerobic Gasketmaker Ref #: 022708PBHH190 TYPICAL APPLICATIONS General Maintenance Flange sealant Replaces traditional, pre-cut gaskets General Assembly Non-sag,
Film PEEK and Kapton. Rod / Tube PEEK, OFE Copper, and 304 Stainless Steel
UHV s UHV s Film PEEK and Kapton Features Ultrahigh vacuum compatible Cleaned for vacuum service Temperature specified for each material Specifications Vacuum Range UHV, Ultrahigh vacuum HV, High vacuum
.050" 4 thru 25 Contacts
.050" 4 thru 25 Contacts MM-11... MM-12... MM-12, MK-16, MK-18 receptacles MM-11, MK-15, MK-17 plugs PAGE 1 OF 4 PAGES BODY CONTACTS OPTIONS SERIES SIZE HARDWARE MM.050" Rugged Metal I/O Connector (MM
DETAIL SPECIFICATION SHEET CABLE, ELECTRICAL, -20 C TO +90 C, TYPE LS3SWU (INCLUDING VARIATION LS3SWUS)
INCH-POUND 11 July 2011 USED IN LIEU OF MIL-DTL-24643/36F 01 October 2009 DETAIL SPECIFICATION SHEET CABLE, ELECTRICAL, -20 C TO +90 C, TYPE LS3SWU (INCLUDING VARIATION LS3SWUS) This specification is approved
Straightway Valves. Sec 2: Products. Dia-Flo Diaphragm Valves /15
Features and Benefits Ideal for slurry, abrasive and corrosive applications, the Dia-Flo Straightway Diaphragm Valve provides the following benefits: Slurry Applications Due to the streamlined fluidpassage,
3M Electromagnetic Compatible Products
3M Electromagnetic Compatible Products Selection Guide Revision E 3 Innovation Faster, smaller, lighter, easier the skyrocketing development of today s electronics requires new solutions for significant
Engineered Gasketing Products
Engineered Gasketing Products Gasketing Products Engineering Data C-1 Notes: C-2 706 5500 5507 Color Binder Temperature Pressure, P x T, max Sealability ASTM Fuel A Nitrogen Creep Relaxation Compressibility
Silicone Material Selection Guide
Silicone Material Selection Guide MARKETS Aircraft Rail Automotive Telecommunications & Electrical Enclosures Portable Communications Exterior Lighting Medical Devices Wire, Cable & Fiberoptics Manufacturing
ATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)
ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper
Paper, Cork & Rubber. Sheet Material. Telephone : Fax : E- mail :
Paper, Cork & Rubber 165 Paper, Rubber & Cork Gasket Materials Rubber, cork and paper-based gasket materials offer a low cost sealing solution for applications where the additional strength offered by
dalcon PHYSICAL PROPERTIES (Typical) DESCRIPTION
dalcon PHYSICAL PROPERTIES (Typical) DESCRIPTION PAGE Table of contents 1 dalcon 001 3 dalcon 006 9 dalcon 018 15 dalcon 020 17 dalcon 021 19 dalcon 025 23 dalcon 086 59 Page 1 of 16 ClactononSea dalcon
3M Electromagnetic Compatible Products
3M Electromagnetic Compatible Products 3Innovation Faster, smaller, lighter, easier the skyrocketing development of today s electronics requires new solutions for significant new problems. These solutions
PRODUCT FORM APPLICATIONS THERMAL PROPERTIES CHEMICAL COMPOSITION GENERAL INFORMATION
ISSUE NO: 4 ISS DATE: 2013 APPROVED: NJRS Certificate No. 03 TECHNICAL DATA SHEET SILICONE RUBBER SPONGE GRADES: SIL10, SIL16, SIL, SIL33 PRODUCT FORM Profile extrusions, sheeting, cord, joined rings,
GASKET MATERIALS. Click the Product Name to go Directly to Any Page Expanded PTFE Sheet Material QUIMFLEX SH 100% Expanded PTFE Sheet...
GASKET MATERIALS Click the Product Name to go Directly to Any Page Expanded PTFE Sheet Material QUIMFLEX SH 100% Expanded PTFE Sheet.... 2 Tealon Sheet Material Tealon TF1590........ 3 Tealon TF1580........
Qualification Reference: AA/ Cage Code: MIL-C Cables NEMA WC27500 Part Number Builder
Qualification Reference: 15404201.AA/1-20-2015 Cage Code: 67050 MIL-C-27500 Cables NEMA WC27500 Part Number Builder MIL-C-27500 Cables NEMA WC 27500 Part Number Builder MIL-C-27500 (M27500 Cable) MIL Spec
Turcon AQ-Seal 5. Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer
Double Acting Rubber Energized Plastic Faced Seal Material: Turcon, Zurcon and Elastomer 41 42 Turcon AQ-Seal 5* Description The Turcon AQ-Seal 5 is a patented development of the proven standard Turcon
50948-RHN Putney. Friday, 15 December This document includes: Code Section Revision Dated
50948-RHN Putney Friday, 15 December 2017 This document includes: Code Section Revision Dated Z11 Purpose made metalwork 1 Table of Contents Title Z11 Purpose made metalwork Page 3 Z11 Purpose made metalwork
Conductive Compounds Selector Guide
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Conductive adhesives, conductive sealants/gap fillers, and conductive
BondaTherm Key Features of the BondaTherm Equalizer Kits: Eliminates improper ratios and mixing errors Reduces material waste Eliminates employee contact with resins Eliminates messy hand mixing and transferring
Hollow O Profiles TechSeal Configuration B Designation Table 11
Hollow O Profiles TechSeal Configuration B Designation Table 11 TechSeal Profile Part Number A Outside Diameter Nominal B Inside Diameter Min Gland Depth Max Groove Width Vacuum & Gases Min Max Groove
O-Ring Surface Coatings
O-Ring Surface Coatings Surface Coating Solutions Material Comparisons Technical Data Sheet: PTFE 1909 Product Description 1909 is a PTFE dispersion in a thermosetting resin designed to provide lubrication
COMPANY Euro Technologies Euro Technologies Euro Technologies Euro Technologies Rosenheim Sales Office Paris Sales Office China Facility
COMPANY Euro Technologies was founded at Concorezzo (Milan) on July 2007. We are the main European distributor and converter of Shielding, RFI and Thermal products. Our staff belongs to this industrial
Material Name Durometer Notes Food Contact Momentive SE Base 35 Used in blend of 6035 & 6075 to provide custom. Yes Momentive SE Base
Technical Reference Bulletin Elastomer Library C&M Rubber Co. has a longstanding business relationship with many polymer suppliers, including Momentive (Formerly GE Silicone), Wacker Silicone, US Silicones,
3M Electrically Conductive Cushion Gasket Tape
Technical Data December 2013 3M Electrically Conductive Cushion Gasket Tape ECG7033H ECG7053H ECG7073H Product Description 3M Electrically Conductive Cushion Gasket Tapes ECG7033H, ECG7053H, and ECG7073H
PEGASUS SERIES GUIDE Amphenol Pcd
GUIDE 2018 Amphenol Pcd Description: The Pegasus Series is Amphenol PCD s latest innovation in small, lightweight, rugged connectors. Designed for use in harsh environments, Pegasus builds on the successful
Innovative, decorative grills & Screens
Innovative, decorative grills & Screens Sales@niduae.com Aluminum Stainless Steel Copper Brass MR Composite panels PVC FOrex Gypsum CNC Cut Laser Cut Waterjet Cut Najib Build Maint T +971-6-7430267 M +971-55-9446222
material specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
HIGH QUALITY THERMALLY CONDUCTIVE MATERIALS
14.february.2011 HIGH QUALITY THERMALLY CONDUCTIVE MATERIALS Table of contents Non-silicone compounds (Tim4xx series)... section 1 Silicone compounds (Tim5xx series)... section 1 Dielectric silicone grease
DETAIL SPECIFICATION SHEET. CLAMP, LOOP, TUBE-17-7 PH CRES, 500 o F
INCH-POUND MIL-DTL-85052/3C 30 March 2005 SUPERSEDING MIL-C-85052/3B 30 MAY 1984 DETAIL SPECIFICATION SHEET CLAMP, LOOP, TUBE-17-7 PH CRES, 500 o F This specification is approved for use by all Departments
BELLOFRAM SILICONES INC OHIO RIVER BOULEVARD NEWELL, WEST VIRGINIA TOLL-FREE: FAX:
TM Silicones BELLOFRAM SILICONES INC. 8019 OHIO RIVER BOULEVARD NEWELL, WEST VIRGINIA 26050 TOLL-FREE: +1.800.727.5646 FAX: +1.304.387.1212 www.belloframsilicones.com BELLOFRAM Closed Cell Silicone Sponge
Taiwan Off ice 5F, No.41, Lane 76, Rei Kuan
Taiwan Office 5F, No.41, Lane 76, Rei Kuang Rd. Nei Hu Dist, Taipei, Taiwan R.O.C Postal Code: 11466 Tel No: +886-2-2793 9055 Fax No: +886-2-2793 9501 2014 (II) Schlegel EMI Fabric Over Foam Fabric-Over-Foam
ANSI and IEC Color Codes for Thermocouples, Wire and Connectors
ANSI and IEC Col Codes f Thermocouples, Wire and Connects Thermocouple Wire, Probes and Connects are available with either ANSI IEC Col Codes. In this Handbook, model numbers in the To Order tables reflect
Services SAMPLE SUMMARY REPORT DR. PUMP, LLC Isuzu Rodeo. Atlanta, GA 05/24/2007
SAMPLE SUMMARY REPORT 7 Portage Trail 8.48.R 7 E A L 5.6.7 Fax:.6.7 44. 57 Report Date: 5/4/7 Primay Contact: Dr. Lev Nelik, PhD 977 Four Oaks Drive 6-75 Secondary Contact: None Provided Voice: None Provided
Conductive Classification & Testing
THERM0PLASTIC ELASTOMERS STRUCTURAL WEAR CONDUCTIVE COLOR FLAME RETARDANT Conductive & EMI Thermoplastic Technologies Conductive Classification & Testing Overview of Conductive Modifiers EMI Shielding
PERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, SINGLE (ONE) FIBER, CABLE CONFIGURATION TYPE 2 (OFCC), TIGHT BUFFER, CABLE CLASS SM AND MM
METRIC MIL-PRF-85045/16C 17 June 2014 SUPERSEDING MIL-PRF-85045/16B 16 September 1999 PERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, SINGLE (ONE) FIBER, CABLE CONFIGURATION TYPE 2 (OFCC), TIGHT BUFFER,