SP3S-AQ2-01 AIR QUALITY SENSOR S March, 2004

Size: px
Start display at page:

Download "SP3S-AQ2-01 AIR QUALITY SENSOR S March, 2004"

Transcription

1 SP3S-AQ2-01 SPECIFICATIONS MODEL: TYPE: SPECIFICATION No. DATE OF ISSUE SPECIFICATIONS FOR: SP3S-AQ2-01 AIR QUALITY SENSOR S March, 2004 Dimensions 0.7 Status Name Date Original Junko Yanagitani 18 March, 2004 Confirmed by Date of issue Sensing element Metal housing Plastic base Electrode pin Distribution Number of copies Date User Distributor FIS Signatures Scale: mm 0.8 Date: User: Date: FIS: FIS Inc Kitazono, Itami, Hyogo , Japan Tel: , Fax: / 6

2 Table of contents 1. Application Page 3 2. Parts Name/Number Page 3 3. Sensing element,dimensions and materials Page 3 4. Absolute Maximum Ratings Page 4 5. Standard Circuit and operating conditions Page 4 6. Sensitivity Characteristics Page 5 7. Mechanical Characteristics Page 5 8. Handling of this Specification Page 6 9. Supplementary items Page 6 History of revisions Ref.No. Date Notes Proposed by Approved by Original 18 March, 2004 Standard specification Junko Yanagitani FIS Q.A.G 2 / 6

3 1. Application This specification is with regards to the SP3S-AQ2-01 which is specified for Air Quality Controls (e.g. for air purifiers, ventilation control systems, etc.)for. 2. Parts Name/Number Type: Model: Air Quality Sensor SP3S-AQ Sensing element,dimensions and materials Alumina substrate Sensing material Heater Sensing element Lead wires Metal housing Sensing element Electrodes Plastic base Electrode pin R H R S 1 2 Equivalent circuit Dimensions materials NO. Parts Materials Conditions 1 Sensing material Metal oxide semiconductor Activated tin dioxide (SnO 2 ) 2 Substrate Alumina (Al 2 O 3 ) High purity alumina ceramic 3 Heater Ruthenium oxide (RuO 2 ) Thick film printed heater 4 Electrode Gold (Au) Thick film printed electrode 5 Lead wire Gold-palladium-molybdenum alloy 50 µm ø 6 Metal housing Brass 7 Plastic base PBT (UL 94HB) 3 / 6

4 4. Absolute Maximum Ratings4. Absolute Maximum Ratings Parameter Symbol Maximum Rating Remark Heater Power Consumption P H Average heater power consumption is 210mW (pin 1-3) Circuit Voltage V C Maximum 5.5 V DC Load Resistance R L Variable (P S < 10mW) Ps=(V S -1/2VH) 2 /R S OperatingTemperaturerange T OP 0 C to 40 C Condensation must be avoided StorageTemperature range Tst 0 C to 60 C Condensation must be avoided Note Avoid any contamination by organic solvents (e.g.ipa: isoprophyl alcohol) 5. Standard Circuit and operating conditions Parameters Conditions Remarks Standard temperature and humidity Test gas 20 C ± 2 C, 65% RH ± 5% 1) Clean air 2) Hydrogen( purity > 99% ) 10ppm (+) 1 Standard operating condition: DC R H V C /V H 3 RL 2 RS V RL V C = Circuit Voltage V H = Heater Voltage R H = Heater Resistance R L = Load Resistance (-) R S = Sensor Resistance V C : 5.0 V ± 0.1V V H : 5.0 ± 0.05V R L : 10 kω ± 1% Pre-heating time more than 48hours At 20 C ± 10 C, 65% RH ± 15% in clean environment 4 / 6

5 6. Sensitivity Characteristics No Parameter Conditions Specifications Remark 1 Sensor resistance in air R S (air) 5kΩ to 20kΩ 2 Sensitivity to H 2 R S (H 2 10ppm) R S (air) 0.30 ± C, 65% RH 3 Heater current Is 42 ma at V H = DC 5.0V 4 Heater resistance R H 91 Ω± 5% at room temperature Note-1: The above characteristics are specified using the Standard Circuit and operating conditions shown in section 5. Note-2: Recommended load resistance (RL) value for actual application is 3.9kΩ (the RL value can be valuable depending on the type of application). Note-3: The specification of 1. sensor resistance in air is based on the atmospheric conditions at FIS. The resistance range in different conditions may vary from the above values. 7. Mechanical characteristics No Parameter Conditions Specifications 1 Strength on the base - housing connection Pulling the housing from plastic base vertically More than 29.4N (3 kgf) 2 Vibration Acceleration: 12.7m/s2 (1.3G) Frequency range: 5 to 500 Hz Condition of changing the sweep: Logarithmic Duration of sweep: 40min. Direction of vibration: 3 dimensions (X,Y,Z) Duration: 6hr of each direction Should satisfy the specifications shown in 6.Characteristics 3 Drop and impact Natural drop from the height of 1m Floor material: Concrete Number of drops: 3 (three) times Should satisfy the specifications shown in 6.Characteristics 4 Soldering specifications Standard: JISC0050 (1997) Soldering iron: Trowel point B Soldering times: 2~3 seconds More than 68.6 N (7kgf) Good fluidity should be kept for easy soldering 5 Insulation resistance 6 Dielectric strength when DC 500 V is applied between the live parts and a metric port without electric current when 1000 V is applied between the live parts and a metal part without electric current for 1 minute 5MΩ or more Dielectric breakdown should not occur (leak current: less than 1 ma) 5 / 6

6 8. Handling of this specification Modifications or amendments of this specifications shall be made based on the agreement between the user and FIS. Modifications or amendments of this specifications shall be confirmed by all concerned parties. This specification should not be disclosed to any other parties without agreement. 9. Supplementary items 1. Storage condition In order to avoid any possible influence during the storage period, the following storage conditions are recommended. - keep in the sealed plastic package supplied from FIS. - keep in a clean environment for avoiding any solvents or aggressive gases (i.e. hydrogen sulfide: H 2 S, sulphur dioxide: SO 2, chlorine: Cl). If the sensors are exposed to such gases (i.e. > 100ppm), sensitivity characteristics may be affected. - contact with silicone compounds must be avoided. - avoid condensation. 2. Marking - The model name and production lot number are printed as below: : July - 1st production lot model Serial number: 1-9, A-Z Month: 1-9, X, Y, Z (from Jan to Dec) Year: 1st digit of year (e.g.3: 2003) QS production lot number 3. Application guidelines - Sensors must be used under the operating conditions shown in 4. Absolute Maximum Ratings and 5. Standard Circuit and operating conditions on page 4. - Use the SP3S-AQ2 sensors in the specified temperature/humidity range shown in 4. Absolute Maximum Ratings. - Avoid vibration shock and dropping it. - Burn-in and calibration must be carried out in a clean environment. - For soldering sensors on PCBs, we recommend manual soldering. If flow soldering is used, fume and flux may contaminate the sensors. - Do not bend or cut sensor pins before or after assembly for avoiding shocks which may damage the sensing element. - Do not apply any solvents on the sensor units. - In case of using any gases such as butane from a cigarette lighter, spray or alcohol vapour for testing purposes, do not apply such gas/solvent directly on the sensor unit (keep a distance of more than 10 cm and apply gas/solvent gently). 6 / 6

an ISO9001 company TECHNICAL INFORMATION FOR TGS2600 Technical Information for Air Quality Control Sensors

an ISO9001 company TECHNICAL INFORMATION FOR TGS2600 Technical Information for Air Quality Control Sensors Technical Information for Air Quality Control Sensors an ISO900 company The Figaro 2600 series is a new type thick film metal oxide semiconductor, screen printed gas sensor which offers miniaturization

More information

an ISO9001 company TECHNICAL INFORMATION FOR TGS2602 Technical Information for Air Quality Control Sensors

an ISO9001 company TECHNICAL INFORMATION FOR TGS2602 Technical Information for Air Quality Control Sensors Technical Information for Air Quality Control Sensors an ISO900 company The Figaro 2600 series is a new type thick film metal oxide semiconductor, screen printed gas sensor which offers miniaturization

More information

Cal-Chip Electronics, Incorporated Thick Film Chip Resistors - RM Series

Cal-Chip Electronics, Incorporated Thick Film Chip Resistors - RM Series Thick Film Chip Resistors - RM Series Fixed Chip Resistors manufactured for more compact electronic components and automatic mounting system. These Chip Resistors have electrical stability and mechanical

More information

TECHNICAL INFORMATION FOR TGS2611

TECHNICAL INFORMATION FOR TGS2611 TECHNICAL INFORMATION FOR TGS26 an ISO900 and 400 company Technical Information for Methane Gas Sensors The Figaro 2600 series is a new type thick film metal oxide semiconductor, screen printed gas sensor

More information

an ISO9001/14001 company

an ISO9001/14001 company an ISO91/141 company Technical Information for Hydrogen Gas Sensors The Figaro TGS6812 catalytic type gas sensor can detect levels of hydrogen up to 1%LEL. This sensor features high accuracy, good durability

More information

an ISO9001/14001 company

an ISO9001/14001 company an ISO91/141 company Technical Information for Hydrogen Gas Sensors The Figaro TGS6812 catalytic type gas sensor can detect levels of hydrogen up to 1%LEL. This sensor features high accuracy, good durability

More information

Reference Only. DC Resistance Impedance at 100MHz (mω) Rated Current *1 MURATA (A) Part Number. (Ω) Tolerance Typ. Max.

Reference Only. DC Resistance Impedance at 100MHz (mω) Rated Current *1 MURATA (A) Part Number. (Ω) Tolerance Typ. Max. Spec No. JENF243J-0002B-01 P1/8 CHIP NOISE FILTER NFZ2MSM SN10L REFERENCE SPECIFICATION 1. Scope This reference specification applies to NFZ2MSM_SN10L, Chip Noise Filter.. 2. Part Numbering (ex) NF Z 2M

More information

Sn-Pb plating or Tin plating

Sn-Pb plating or Tin plating 2/14 Unit mm L a a Code letter Dimension L 2..2 W 1.25.2 W t a b.4.1.4.2.4.2 t b b Fig.1 Construction and dimensions NOTE : Resistive element Electrode Protective coat Substrate Nichrome alloy thin film

More information

1/2W, 0805 Low Resistance Chip Resistor (Lead / Halogen free)

1/2W, 0805 Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope 1/2W, 0805 (Lead / Halogen free) This specification applies to 1.2mm x 2.0mm size 1/2W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL

More information

AMOTECH SPECIFICATION MULTILAYER CHIP VARISTOR TYPE : AVLC 5S July 3, 2001 MULTILAYER CHIP VARISTOR SHEET 1/6 DESIGNED CHECKED APPROVED

AMOTECH SPECIFICATION MULTILAYER CHIP VARISTOR TYPE : AVLC 5S July 3, 2001 MULTILAYER CHIP VARISTOR SHEET 1/6 DESIGNED CHECKED APPROVED SPECIFICATION MULTILAYER CHIP VARISTOR TYPE : AVLC 5S 02 050 July 3, 2001 CO., LTD. 17-2, JAMWON-DONG, SEOCHO-GU, SEOUL, KOREA TEL : 82-2-544-1351 FAX : 82-2-517-7183 DESIGNED CHECKED APPROVED MULTILAYER

More information

RESP_IRR_20 P Package

RESP_IRR_20 P Package 15x15 Respiratory Irritant Sensor 20 ppm P Package 110-901 DESCRIPTION SPEC Sensors RESP_IRR_20 is a Screen Printed ElectroChemical sensor component specifically designed for the broad detection of respiratory

More information

RF Transformer (Stabilized Matching Device) SMST18 series

RF Transformer (Stabilized Matching Device) SMST18 series 1 Features RF Transformer Stabilized Matching Device is RF impedance matching component. You can adjust impedance matching easily between antenna and feeding point, when you use RF Transformer. RF Transformer

More information

Cover. Wiper. Base. Shaft

Cover. Wiper. Base. Shaft TURNS INTERNAL STRUCTURE!! FEATURES Lead-free soldering, Cadmium-free Fine adjustment is possible Automatic mounting is possible (Taping) Flow/reflow soldering is possible Sealed construction (Washable)

More information

TECHNICAL INFORMATION FOR TGS203. Technical Information for Carbon Monoxide Sensors

TECHNICAL INFORMATION FOR TGS203. Technical Information for Carbon Monoxide Sensors Technical Information for Carbon Monoxide Sensors The marketing of TGS203 started in 980 as a semiconductive type carbon monoxide sensor featuring high selectivity and stability. Since then, this sensor

More information

Features. FX22 Series NEW

Features. FX22 Series NEW NEW FX22 Series Floating range: ±.6mm Z X Fig.1 Features 1. The floating design Structure provides for an mis-alignment of ±.6mm in both X and Z directions in.5mm pitch product. (Fig.1) 2. A double-beam

More information

Topview 5630 Red SMD LED

Topview 5630 Red SMD LED Topview 5630 Red SMD LED 1. Features - Chip High-Luminosity SMD LED - 5.6 x 3.0 x 0.9 mm (L x W x H), 4-Pin, Small Size Surface Mount Type - Wide Viewing Angle - Long Operating Life - MSL 3 2. Applications

More information

Reference Only. 2.Part Numbering (ex) NF Z 5B BW 2R9 L N 1 0 L

Reference Only. 2.Part Numbering (ex) NF Z 5B BW 2R9 L N 1 0 L SpecNo.JENF243J-0011A-01 P1/10 CHIP NOISE FILTER NFZ5BBW LN10 REFERENCE SPECIFICATION 1.Scope This reference specification applies to NFZ5BBW_LN10L Series, Chip Noise Filter. 2.Part Numbering (ex) NF Z

More information

3SP_CO_1000 Package

3SP_CO_1000 Package 15x15 CO Sensor 1000 ppm Package 110-102 BENEFITS Small Size with Low Profile (20x20x3.8 mm) Long Life (10 years expected life) Fast Response (< 15 seconds) Robust (passes 5000 ppm overload) Low Power

More information

Reference Only. Spec. No. JENF243D-0006K-01 P 1/ 8

Reference Only. Spec. No. JENF243D-0006K-01 P 1/ 8 Spec. No. JENF243D-0006K-01 P 1/ 8 Chip EMIFIL LC Combined Monolithic NFL21SP X1C Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Monolithic Type NFL21S

More information

TBF R1N THIN FILM BAND PASS FILTER. Insertion Loss 1.7dB Max. at +25

TBF R1N THIN FILM BAND PASS FILTER. Insertion Loss 1.7dB Max. at +25 TBF-1608-245-R1N THIN FILM BAND PASS FILTER 1. Feature 1-1 Thin Film Band Pass Filter 1-2 WLAN Band Application. 1-3 Ultra Low Profile 1-4 Lead Free, RoHS compliance 2. Part Number TBF 1608 245 R1N (1)

More information

Amphenol Amphenol Taiwan Corporation Sheet 1 of 7

Amphenol Amphenol Taiwan Corporation Sheet 1 of 7 Amphenol Amphenol Taiwan Corporation Sheet 1 of 7 Title: Part Number: Description: Micro SD Card Connectors Product Specification GTFP08 SERIES Micro SD Card Connectors push-push type Revisions Control

More information

Ceramic ESD Protection Device LXES15GAA1-155 For Automotive

Ceramic ESD Protection Device LXES15GAA1-155 For Automotive Ceramic ESD Protection Device LXES15AA1-155 For Automotive 1. This specification shall be applied to the ESD Protection Device. p1/15 LXES15AA1-155 ( car accessory, Vehicle interior ) 2. Part Number Configuration

More information

2W, 2512, 4-Terminal, Low Resistance Chip Resistor (Lead / Halogen Free)

2W, 2512, 4-Terminal, Low Resistance Chip Resistor (Lead / Halogen Free) 2W, 2512, 4-Terminal, Low Resistance Chip Resistor (Lead / Halogen Free) 1. Scope This specification applies to 3.2mm x 6.4mm size 2W, fixed metal foil with ceramic carrier current sensing resistors used

More information

Reference Only. Spec. No. JENF243D-0003J-01 P1/ 8

Reference Only. Spec. No. JENF243D-0003J-01 P1/ 8 Spec. No. JENF243D-0003J-01 P1/ 8 Chip EMIFIL LC Combined Monolithic NFL18SP X1A3 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Monolithic Type NFL18SP

More information

CHEQUERS ELECTRONIC (CHINA) LIMITED. Quartz Crystal Oscillator Specification

CHEQUERS ELECTRONIC (CHINA) LIMITED. Quartz Crystal Oscillator Specification CHEQUERS ELECTRONIC (CHINA) LIMITED Quartz Crystal Oscillator Specification Part No.: CO12.0000SMM23 Page(s) : 1of 6 Address : Room 1101-3, Mongkok Commercial

More information

PART MATERIAL REMARK Metal Case with Pig-tail. Brass (Metal Case) Copper (Pig-tail) Star Contact Copper Silver Plated

PART MATERIAL REMARK Metal Case with Pig-tail. Brass (Metal Case) Copper (Pig-tail) Star Contact Copper Silver Plated 1. SCOPE This specification defines the technical requirements of TZ-D series thermal-link with PROFFUSE brand that are produced according to IEC 60691, UL 60691,GB 9816. 2. APPLICABLE STANDARDS IEC 60691,

More information

Datasheet RS Pro RS Series Thick Film Surface Mount Resistor 0603 Case 330Ω ±5% 0.1W ±200ppm/ C RS Stock No:

Datasheet RS Pro RS Series Thick Film Surface Mount Resistor 0603 Case 330Ω ±5% 0.1W ±200ppm/ C RS Stock No: Datasheet RS Pro RS Series hick Film Surface Mount Resistor 0603 Case 330Ω ±5% 0.1 ±200ppm/ C RS Stock No: 713-4129 Product Details RS Pro 0603 thick film surface mount resistor with ±5% tolerance, provides

More information

Floating Stacking 0.5mm Pitch Board to Board Connector

Floating Stacking 0.5mm Pitch Board to Board Connector Floating Stacking 0.5mm Pitch Board to Board Connector FX20 Series X direction Floating range : 0.6 to 0.8mm Y direction Floating range : 0.6mm Features 1. 0.5mm pitch 2. Connection type: Stacking 3. Number

More information

Reference Only. SpecNo.JELF243A-0122C-01 P1/8. Inductance DC Resistance Self. Tolerance (%)

Reference Only. SpecNo.JELF243A-0122C-01 P1/8. Inductance DC Resistance Self. Tolerance (%) SpecNo.JELF243A-0122C-01 P1/8 CHIP COIL(CHIP INDUCTORS) LQH5BPN 38 REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQH5BP_38 Series, Chip coil (Chip Inductors). 2. Part Numbering

More information

Metal Film Leaded Precision Resistor-MFR Series

Metal Film Leaded Precision Resistor-MFR Series Metal Film Leaded Precision ResistorMFR Series Construction 5 6 1 2 3 4 7 d D L H 1 Insulation Coating (Expose resin) 5 Resistor Layer (Nickel alloy) 2 Trimming Line 6 Marking (Expose) 3 Ceramic Rod (Alumina

More information

Reference Only. *B:Bulk packing also available. Inductance DC Resistance ( m ohm)

Reference Only. *B:Bulk packing also available. Inductance DC Resistance ( m ohm) P.1/9 CHIP COIL (CHIP INDUCTORS) LQM18PN FHD REFERENCE SPECIFICATION 1.Scope This reference specification applies to LQM18PN_FH series, Chip Coil (Chip Inductors). 2. Part Numbering (ex) LQ M 18 P N 2R2

More information

MAY-16 REV B2

MAY-16 REV B2 Product Specification 108-20025 06-MAY-16 REV B2 The product described in this document has not been fully tested to ensure conformance to the requirements outlined below. Therefore, TE Connectivity (TE)

More information

P/N: RGTCM H0T. Halogens Free Product. RGTCM Series 0806(3025)- RoHS Compliance THIN FILM CERAMIC COMMON MODE FILTER.

P/N: RGTCM H0T. Halogens Free Product. RGTCM Series 0806(3025)- RoHS Compliance THIN FILM CERAMIC COMMON MODE FILTER. RGTCM Series 0806(3025)- RoHS Compliance THIN FILM CERAMIC COMMON MODE FILTER Halogens Free Product P/N: RGTCM0806650H0T *Contents in this sheet are subject to change without prior notice. Page 1 of 7

More information

Reference Only. Spec. No. JENF243E-0002Q-01 P1 / 8

Reference Only. Spec. No. JENF243E-0002Q-01 P1 / 8 Spec. No. JENF243E-0002Q-01 P1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE31PT 1E9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for Large

More information

Ceramic ESD Protection Device LXES**A series Document No. LX Rev1.0

Ceramic ESD Protection Device LXES**A series Document No. LX Rev1.0 Ceramic ESD Protection Device LXES**A series Document No. LX 1-1111 Rev1.0 1. This specification shall be applied to the ESD Protection Device. p1/18 LXES03AAA1-098 LXES15AAA1-117 LXES15AAA1-153 LXES03AAA1-154

More information

PRODUCT SPECIFICATION FOR APPROVAL

PRODUCT SPECIFICATION FOR APPROVAL Issue No. : 151EX008060 Date of Issue : November 26.2008 DIGI-KEY CORPORATION Classification : New Changed PRODUCT SPECIFICATION FOR APPROVAL Product Description Product Part Number : Chip Resistor Array

More information

CHIP TECHNOLOGIES INC. Chip Resistor Specification

CHIP TECHNOLOGIES INC. Chip Resistor Specification CHIP TECHNOLOGIES INC. Chip Resistor Specification Utech Electronics 1-5250 Finch Ave. East Scarborough, Ontario Canada, M1S 5A4 1-800-268-8832 www.utech.ca 1 1.0 SCOPE... 3 2.0 Part Number Designation.

More information

5W, 4527, SL Type Low Resistance Chip Resistor (Lead / Halogen Free)

5W, 4527, SL Type Low Resistance Chip Resistor (Lead / Halogen Free) 5W, 4527, (Lead / Halogen Free) 1. Scope This specification applies to 7.1mm x 12mm size 5W, fixed metal foil current sensing resistors used in electronic equipment. 2. Type Designation RL4527JW (1) (2)

More information

DATA SHEET Metal Element Current Sensing Chip Resistor CLS Series

DATA SHEET Metal Element Current Sensing Chip Resistor CLS Series DATA SHEET Metal Element Current Sensing Chip Resistor 0.5% TO 5%, TCR ±25 TO ±450 SIZE: 1206/2010/2512/2725/2728/4527/4527S RoHs Compliant 14 October, 2016 V.4 DS-ENG-007 23 Page: 2 of 1. SCOPE 1.1 This

More information

Reference Only. 1. Scope This reference specification applies to Wire Wound Chip Common Mode Choke Coil DLW5AT_SQ Series.

Reference Only. 1. Scope This reference specification applies to Wire Wound Chip Common Mode Choke Coil DLW5AT_SQ Series. Spec No. JEFL243C 0017H-01 P 1/10 Wire Wound Chip Common Mode Choke Coil DLW5ATN SQ2 Reference Specification 1. Scope This reference specification applies to Wire Wound Chip Common Mode Choke Coil DLW5AT_SQ

More information

Reference Only. SpecNo.JELF243A-0030T-01 P1/8

Reference Only. SpecNo.JELF243A-0030T-01 P1/8 SpecNo.JELF243A-0030T-01 P1/8 CHIP COIL (CHIP INDUCTORS) LQH32CN 53L REFERENCE SPECIFICATION 1. Scope This reference specification applies to LQH32CN_53 Series, Chip coil (Chip Inductors). 2. Part Numbering

More information

PRODUCT SPECIFICATION SHEET

PRODUCT SPECIFICATION SHEET 5F, NO. 16, Sec. 2 Chung Yang S Rd., Peitou, Taipei, Taiwan. TEL : 886228941202, 886228952201 FAX : 886228941206, 886228956207 www.txccorp.com PRODUCT SPECIFICATION SHEET PRODUCT TYPE : SMD TA TYPE NOMINAL

More information

PSE Technology Corporation

PSE Technology Corporation PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY PRODUCT TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 32.768 KHz TYPE G8 SMD CRYSTAL 0 Jun.16,2016 A APPROVED PREPARED

More information

2 of 13 pages Directory 1. Outline Drawing 3/13 2. Features 3/13 3. Typical Applications 3/13 4. Specifications 3/13 5. Capacitor series code informat

2 of 13 pages Directory 1. Outline Drawing 3/13 2. Features 3/13 3. Typical Applications 3/13 4. Specifications 3/13 5. Capacitor series code informat 1 of 13 pages Product specifications Product name CL21 Type Film Capacitor Specifications Series Parts origin China Shantou 汕头高新区松田实业有限公司 SHANTOU HIGH-NEW ZONE SONGTIAN ENTERPRISE CO., LTD Add:9,kejixi

More information

Reference Only. Spec No. JENF243G-0003E-01 P 1 / 6

Reference Only. Spec No. JENF243G-0003E-01 P 1 / 6 Spec No. JENF243G-0003E-01 P 1 / 6 1.Scope Ferrite Bead Inductor BL01RN1A Reference Specification This reference specification applies Ferrite Bead Inductor. 2.Part Numbering (Ex.) BL 01 RN 1 A1 F 1 A

More information

2.4 GHz ISM Band Working Frequency

2.4 GHz ISM Band Working Frequency RGBPB 2520(1008) Series RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER - Balanced Type 2.4 GHz ISM Band Working Frequency P/N: RGBPB2520090A5T *Contents in this sheet are subject to change without

More information

MULTILAYER CERAMIC BAND PASS FILTER - Balanced Type

MULTILAYER CERAMIC BAND PASS FILTER - Balanced Type RFBPB Series 2012(0805)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER - Balanced Type Halogens Free Product 2.4 GHz ISM Band Working Frequency P/N: RFBPB2012090AM8T62 *Contents in this sheet are

More information

Features. FX22 Series

Features. FX22 Series FX22 Series Floating range: ±.6mm Z X Features 1. The floating design Structure provides for an mis-alignment of ±.6mm in both X and Z directions in.5mm pitch product. (Fig.1) 2. A double-beam contact

More information

The MiCS-4514 is a compact MOS sensor with two fully independent sensing elements on one package.

The MiCS-4514 is a compact MOS sensor with two fully independent sensing elements on one package. The is a compact MOS sensor with two fully independent sensing elements on one package. The is a robust MEMS sensor for the detection of pollution from automobile exhausts. Features Smallest footprint

More information

Product Specification JUL 14 Rev. A1

Product Specification JUL 14 Rev. A1 Industrial SCSI Connector 1. Scope 1.1 Contents This specification covers the requirements for product performance, test methods and quality assurance provisions of SCSI Connector. 2. Applicable Documents

More information

Reference Only. SpecNo.JELF243A-0041N-01 P1/10

Reference Only. SpecNo.JELF243A-0041N-01 P1/10 SpecNo.JELF243A-0041N-01 P1/10 CHIP COIL(CHIP INDUCTORS)LQH32MN 23L REFERENCE SPECIFICATION 1.Scope This reference specification applies to LQH32MN Series, Chip coil (Chip Inductors). 2.Part Numbering

More information

HIGH VOLTAGE RESISTOR HVR

HIGH VOLTAGE RESISTOR HVR HIGH VOLTAGE RESISTOR FEATURES Metal film technology High pulse loading capability Small size Meeting safety requirements of: UL1676 (37 and 68, range 510 KΩ ~ 11 MΩ) - pending IEC 60065 EN 60065 VDE 0860

More information

P/N: RFBPF C07B1U. Halogens Free Product. 1125~1675MHz Band Application. RFBPF Series 3225(1210)- RoHS Compliance

P/N: RFBPF C07B1U. Halogens Free Product. 1125~1675MHz Band Application. RFBPF Series 3225(1210)- RoHS Compliance RFBPF Series 3225(1210)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER Halogens Free Product 1125~1675MHz Band Application P/N: RFBPF3225180C07B1U *Contents in this sheet are subject to change without

More information

Part No.: ZLMR1608 Series Specification

Part No.: ZLMR1608 Series Specification 1. Scope This Specification is applied to the Pb free SMD Chip Ferrite bead for ZLMR1608 Series Product. 2. Part Number Code ZLMR 1608 D 121 G T (1) (2) (3) (4) (5) (6) (1) Series Number: ZLMR-Magnetic

More information

P/N: RBBPF C67B1U. Halogens Free Product. RBBPF Series 3225(1210)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER

P/N: RBBPF C67B1U. Halogens Free Product. RBBPF Series 3225(1210)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER RBBPF Series 3225(1210)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER Halogens Free Product 1125 ~ 1675 MHz RF Application 50 ohm impedance with DC blocking caps in I/O pins P/N: RBBPF3225180C67B1U

More information

NARROW PITCH (0.4mm) CONNECTORS P4S SERIES

NARROW PITCH (0.4mm) CONNECTORS P4S SERIES FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION AXT3, 4 NARROW PITCH (0.4mm) CONNECTORS P4S SERIES NEW 2. Strong resistance to adverse environments! Utilizes construction for high contact reliability. 1)

More information

PSE Technology Corporation

PSE Technology Corporation PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY PRODUCT TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 32.768 KHz TYPE G9 SMD CRYSTAL G93270002 0 Oct.31,2013 C

More information

Nemoto Sensor Engineering Company Ltd

Nemoto Sensor Engineering Company Ltd Nemoto Sensor Engineering Company Ltd 4-10-9 Takaido-Higashi Suginami-ku Tokyo 168-0072 Japan Web: www.nemoto.eu E-mail: sensor2@nemoto.co.jp Technical Information and User Manual NE4-CO-SI Electrochemical

More information

PSE Technology Corporation

PSE Technology Corporation PSE Technology Corporation SPECIFICATION FOR APPROVAL CUSTOMER NOMINAL FREQUENCY PRODUCT TYPE SPEC. NO. ( P/N ) CUSTOMER P/N ISSUE DATE VERSION 32.768 KHz TYPE G9 SMD CRYSTAL G93270004 0 Oct.25,2013 B

More information

32507-MP. Research Kit of Gas Sensor Modules. Sensitivity Adjustment. Vcc GND Digital OUT Analog OUT LM393

32507-MP. Research Kit of Gas Sensor Modules. Sensitivity Adjustment. Vcc GND Digital OUT Analog OUT LM393 -/4 32507-MP Research Kit of Gas Sensor Modules Ideal for schools, research labs & experimenters. State of the art MQ-Series gas sensors coupled with a simple adjustable comparator circuit using a LM393

More information

Amphenol Amphenol Taiwan Corporation Sheet 1 of 9

Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Amphenol Amphenol Taiwan Corporation Sheet 1 of 9 Title: Part Number: Description: Micro Power Wafer Product Specification G881A / G881B / G881MA / G881H / G881C 3.0 mm Pitch, PCB Mount / SMT Type / CRIMPING

More information

General Purpose Chip Resistors MCMR Series

General Purpose Chip Resistors MCMR Series Description The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface

More information

MULTILAYER CERAMIC NOTCH FILTER. RFDIP Series 1608(0603)- RoHS Compliance

MULTILAYER CERAMIC NOTCH FILTER. RFDIP Series 1608(0603)- RoHS Compliance MULTILAYER CERAMIC NOTCH FILTER RFDIP Series 1608(0603)- RoHS Compliance Halogens Free Product 2.4 GHz & 5 GHz ISM Band Working Frequency P/N: RFDIP1608060L3T *Contents in this sheet are subject to change

More information

Novel Technique for Flip Chip Packaging of High power Si, SiC and GaN Devices. Nahum Rapoport, Remtec, Inc.

Novel Technique for Flip Chip Packaging of High power Si, SiC and GaN Devices. Nahum Rapoport, Remtec, Inc. Novel Technique for Flip Chip Packaging of High power Si, SiC and GaN Devices Nahum Rapoport, Remtec, Inc. 1 Background Electronic Products Designers: under pressure to decrease cost and size Semiconductor

More information

Reference Only. Spec. No. JENF243H-0005H-01 P 1/ 7

Reference Only. Spec. No. JENF243H-0005H-01 P 1/ 7 Spec. No. JENF243H-0005H-01 P 1/ 7 1. Scope Block Type EMIFIL BNX003-01 Reference Specification This reference specification applies to Block Type EMIFIL. 2. Rating 2.1 Customer Part Number 2.2 Murata

More information

Spec. No. JENF243H-0006H-01 P 1/ 7

Spec. No. JENF243H-0006H-01 P 1/ 7 Spec. No. JENF243H-0006H-01 P 1/ 7 1. Scope 2. Rating Block Type EMIFIL BNX005-01 Reference Specification This reference specification applies to Block Type EMIFIL. 2.1 Customer Part Number 2.2 Murata

More information

NARROW PITCH (0.4mm) CONNECTORS P4S SERIES

NARROW PITCH (0.4mm) CONNECTORS P4S SERIES FOR BOARD-TO-BOARD AND BOARD-TO-FPC CONNECTION NARROW PITCH (0.4mm) CONNECTORS P4S SERIES Compliance with RoHS Directive http://www.mew.co.jp/ac/e/ FEATURES 1. Space saving Compared to the currently sold

More information

MULTILAYER CERAMIC BAND PASS FILTER

MULTILAYER CERAMIC BAND PASS FILTER RFBPF Series 2520(1008) - RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER 2.4 GHz ISM Band Working Frequency P/N: RFBPF2520080AUT *Contents in this sheet are subject to change without prior notice.

More information

RF Transformer (Stabilized Matching Device) SMST21NMHB series

RF Transformer (Stabilized Matching Device) SMST21NMHB series 1 Features RF Transormer Stabilized Matching Device is RF impedance matching components. You can adjust impedance matching easily between antenna and eeding point, when you use RF Transormer. RF Transormer

More information

Nemoto Sensor Engineering Company Ltd

Nemoto Sensor Engineering Company Ltd Nemoto Sensor Engineering Company Ltd 4-10-9 Takaido-Higashi Suginami-ku Tokyo 168-0072 Japan Web: www.nemoto.eu E-mail: sensor2@nemoto.co.jp Technical Information and User Manual NE4-HCHO-S Electrochemical

More information

P/N: RFBPF Y07B1U. Halogens Free Product. 475~675 MHz Band Application. RFBPF Series 3225(1210)- RoHS Compliance

P/N: RFBPF Y07B1U. Halogens Free Product. 475~675 MHz Band Application. RFBPF Series 3225(1210)- RoHS Compliance RFBPF Series 3225(1210)- RoHS Compliance MULTILAYER CERAMIC BAND PASS FILTER Halogens Free Product 475~675 MHz Band Application P/N: RFBPF3225200Y07B1U *Contents in this sheet are subject to change without

More information

Thick film rectangular

Thick film rectangular Thick film rectangular (3225 size: 1 / 4W)!Features 1) Made of same material as the general purpose chip resistors (MCR1 / 18). 2) Highly reliable chip resistor Ruthenium oxide resistive material offers

More information

NTC Thermistors for automotive devices (chip type)

NTC Thermistors for automotive devices (chip type) Multilayer NTC Thermistors Series: ERTJ Handling Precautions Safety Precautions The, hereafter referred to as Thermisotrs, is designed for use in automotive devices. When subjected to severe electrical,

More information

Design Objective

Design Objective Design Objective 108-115096 Low profile 5A battery connector 2015.03.03 REV:A 1.0 Scope: 1.1 Content: This specification covers the requirements for product performance, test methods and quality assurance

More information

JN FPC P CONNECTOR MANUFACTURER SIGNATURE

JN FPC P CONNECTOR MANUFACTURER SIGNATURE DOC. NO.: - ISSUE DATE: 20 / / CUSTOMER: PART NAME: PART NO.: FPC P CONNECTOR 1 APP. DATE: MANUFACTURER SIGNATURE P-TWO INDUSTRIES INC. NO. 9, SHIN HWA RD, KWEI SHAN IND. PARK TAOYUAN, 330 TAIWAN, R.O.C.

More information

FrelTec GmbH. Cement Fixed Resistors

FrelTec GmbH. Cement Fixed Resistors GmbH Mathildenstr. 10A 82319 Starnberg Germany 9/21/2014 1/17 Freltec GmbH www.freltec.com SPECIFICATION Part Number 060 WC 05 * W * J * 0 P05 * Type Version / Type Wattage production type Value Tolerance

More information

Multilayer NTC Thermistors

Multilayer NTC Thermistors Multilayer NTC Thermistors Series: ERTJ Handling Precautions Safety Precautions Multilayer NTC Thermistors (hereafter referred to as Thermistors ) should be used for general purpose applications found

More information

Reference Only. This reference specification applies to Wire Wound Chip Common Mode Choke Coil.

Reference Only. This reference specification applies to Wire Wound Chip Common Mode Choke Coil. Spec. No. JEFL243C-0025G-01 P 1/10 Wire Wound Chip Common Mode Choke Coil DLW5BTM TQ2 Reference Specification 1. Scope This reference specification applies to Wire Wound Chip Common Mode Choke Coil. 2.

More information

Reference Only. Spec. No. JENF243E-0003Q-01 P 1 / 8. Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification

Reference Only. Spec. No. JENF243E-0003Q-01 P 1 / 8. Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification Spec. No. JENF243E-0003Q-01 P 1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for

More information

Miniature High Power Relay SRRHN/SRP

Miniature High Power Relay SRRHN/SRP www.industrialcontroldirect.com Tel: 817-37-23 Fax: 817-49-249 info@industrialcontroldirect.com SRRHN/SRP Low height 1.7mm 16A switching capabilities 1 & 2 pole configuration KV dielectric coil to contacts

More information

M16 M20 M25 M207 M51 M100 M200

M16 M20 M25 M207 M51 M100 M200 Metal Film Fixed Resistor Specifications Per IEC 60115-1 MIL-R-10509 d L H D Features Conformal multi-layer coating Color code per MIL & EIA standards Special tin-plated electrolytic copper lead wire Products

More information

Reference Only. (8)Numbers of Circuit. Impedance. (at 100MHz, Under Standard Testing Condition) 33±25%

Reference Only. (8)Numbers of Circuit. Impedance. (at 100MHz, Under Standard Testing Condition) 33±25% P.1/9 Chip Ferrite Bead BLM31 SN1 Reference Specification 1. Scope This reference specification applies to Chip Ferrite Bead BLM31_SN Series. 2. Part Numbering (ex.) BL M 31 PG 601 S N 1 L (1) (2) (3)

More information

Reference Only. Spec. No. JENF243H-0003G-01 P 1/ 9

Reference Only. Spec. No. JENF243H-0003G-01 P 1/ 9 Spec. No. JENF243H-0003G-01 P 1/ 9 Block Type EMIFIL BNX01-01 Reference Specification 1. Scope 2. Rating This reference specification applies to Block Type EMIFIL. 2.1 Customer Part Number 2.2 Murata Part

More information

Current Sensing Resistor Thick Film Type > SK Series

Current Sensing Resistor Thick Film Type > SK Series Page: 1 of 7 General Chipsizefrom0603to2512 Resistance value from 10m to 1000m Compatible with Reflow and Wave Soldering processes Lead free, ROHS compliant for global Applications and halogen free Application

More information

Sensor Cartridge SC2 for toxic gases and oxygen

Sensor Cartridge SC2 for toxic gases and oxygen Page 1 Dec. 2016 Exchangeable sensor including digital value processing, temperature compensation and self control for the continuous monitoring of the ambient air. The sensor cartridge SC2 includes an

More information

Sensing distance. 5 mm (slot width) Emitter Forward voltage Reverse current Peak emission wavelength Detector. Duty ratio: 1% Puls width: 0.

Sensing distance. 5 mm (slot width) Emitter Forward voltage Reverse current Peak emission wavelength Detector. Duty ratio: 1% Puls width: 0. Photomicrosensor (Transmissive) EE-SX35 Compact Slot / SMD Type (Slot width: 5 mm) Unique 5 mm Slot width. PCB surface mounting type. High resolution with a.5-mm-wide aperture. Be sure to read Safety Precautions

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 1 of 21 B 1.0 OBJECTIVE This specification defines the performance, test, quality and reliability requirements of the slotted and vertical staking header connectors. 2.0 SCOPE This specification covers

More information

Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W ppm/ C RS Stock No:

Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W ppm/ C RS Stock No: Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W -500 +350ppm/ C RS Stock No: 707-8861 Product Details RS Pro axial carbon resistor with ±5% tolerance, provides 1 kω resistance and is power

More information

Sales: Technical: Fax:

Sales: Technical: Fax: DATA SHEET Order code Manufacturer code Description 62-7265 n/a 1R 2W 1% METAL FILM RESISTOR RC 62-7266 n/a 2R2 2W 1% METAL FILM RESISTOR RC 62-7267 n/a 3R3 2W 1% METAL FILM RESISTOR RC 62-7268 n/a 4R7

More information