CB x 33 x 70 cm

Size: px
Start display at page:

Download "CB x 33 x 70 cm"

Transcription

1

2 MECHANICAL TESTERS The Mechanical Tester has been designed with leading edge technologies in order to give the highest accuracy and repeatability on the widest range of measurements. This focus on quality ensures durability with the lowest cost of ownership in the industry. The Nano and Micro Modules perform all modes of testing including indentation, scratch and wear; no interchange of modules needed and with true feedback load control from independent load and depth sensors. With indentation testing, users obtain depth versus load curves giving hardness, elastic modulus, yield strength, loss and storage modulus and many others. While with scratch testing, users can quantify the scratch and marring resistance of coatings and substrates in addition to measuring plastic and elastic deformations. With wear testing at constant load, users can precisely measure coefficient of friction and wear properties. The powerful software offers a unique combination of features for each test modes. A complete system, the Mechanical Tester is the ideal solution for determining the full range of mechanical properties of thin or thick, soft or hard coatings, films and substrates. Many advanced software features including Fast Map, Tracking zoomed View, Navigation Plus, Broadview Map Selection and Single Indent Area Function (EP No ) makes the Mechanical Tester the most automated and user-friendly system on the market.

3 The CB500 allows a single module, either the nano or micro, each with the full range of testing modes including hardness, scratch and wear. Nowhere else can you find this wide use with a single module and at competitive compact price. It is equipped with automated 50mm x 100mm X-Y stages, a 50mm Z stage and a video zoom microscope. A CB500 version with manual X-Y table offers full indentation capabilities at the most affordable price. All CB500 bases can also accommodate the heating oven and the cooling/humidity control chamber for environmental control testing. It is the ideal solution for quality control and research applications with focus in one broad load range. Compact & modern design, broad application use, robust with low cost of ownership and a highly competitive price. CB500 BASE Maximum # of Modules X&Y Motorized Stages XY Lateral Accuracy Z Motorized Approach (range) Base Type Desktop Dimensions Stand-Alone Dimensions Zoom Video Microscope 3D Optical Profiler AFM High Speed Fretting Wear CB500 1 (Nano or Micro) 100 x 50mm 1μm 50mm Desktop 38 x 33 x 70cm 1600 x 1200 Camera Automated 50mm Z control 38 x 33 x 70 cm Color video zoom option 3 MODES NANO OR MICRO Standard or custom sample stage and Indentation temperature and humidity control options Nano or Micro Module Spacious and open platform Scratch Wear Compact base Automated 50mmx100mm X-Y control

4 The PB1000 allows up to two modules on a single system providing the widest load and most accurate testing capabilities available. Equipped with automated 200mm x 150mm XY motorized tables and a 50mm Z motorized table. A gas-spring slide allows adjusting of the height clearance to up to a total of 140mm for varying sample sizes. This base can also accommodate the heating oven and the cooling/humidity chamber for environmental control testing. In addition to the full video zoom, an AFM and an Optical Profiler are optional. The Platform is the ideal option for diverse and expanding measurement needs. Nano to micro range with no need to exchange, spacious platform with adjustable height clearance, fully upgradeable, robust and low cost of ownership. PB x 62 x 82 cm BASE Maximum # of Modules X&Y Motorized Stages XY Lateral Accuracy Z Motorized Approach (range) Base Type Desktop Dimensions Stand-Alone Dimensions Zoom Video Microscope 3D Optical Profiler AFM High Speed Fretting Wear PB (Nano & Micro) 200 x150mm 0.25μm 50mm (+ 140mm manual extra slide) Desktop or Stand-Alone 62 x 62 x 82cm 92 x 92 x 183cm 1600x1200 Camera Optional Optional Custom up to 40 Hz Color video camera Adjustable height clearance AFM or optical profiler integration Nano & Micro on a single system Microscope video zoom imaging with options Automated 50mm Z control 6 MODES NANO & MICRO Indentation Automated 200 x150mm XY control Scratch Standard or custom sample stage and temperature and humidity control options Spacious and open platform Joypad stage control Wear

5 Microscope Video Imaging Available on both the CB500 and PB1000. The system is offset to the indenter with a calibrated distance for precise repositioning from one to the other. 12X Ultra zoom Lens with coax lighting & detent. Color Video Camera (PAL 1200x1600). Objectives up to 100x available for maximum magnification of 8000X. Auto-Focus with image stacking capability ensures user-friendliness with clarity of image. Broadview Map Selection allows user to take a picture of the surface and stitch multiple images together for broad surface view. Multiple areas can then be selected for automatic recipe testing. OPTICS Broadview Map Selection Tool FastMap with speed as fast as 3 seconds per indent Full Scratch Image for post inspection using tracking zoomed view.

6 NANO MODULE Designed with the vision of providing clients high accuracy with ease of use, longevity with low maintenance cost; the nano module achieves this with its unique combination of piezo actuator, ultra sensitive load cell and a large surface capacitor ring, all vertically aligned for maximum stiffness. The unique use of independent depth and load sensors ensure high accuracy in all conditions but also provide excellent point of contact detection as the load applied is measured directly by the independent sensor when the indenter first touches the surface. The module also provides true closed control feedback loop using data from independent depth or load sensor. This feature is essential to react quickly and accurately to fast events such as during scratch and wear testing or when fractures occur during indentation. The measurement of the actual load applied ensures also accuracy during fast DMA testing and allows automatic. The ultra sensitive load cell is also straightforward to calibrate with a direct weight scale. Therefore, every Nano module can be quickly calibrated, by the user, in less than 15minutes for Load, Depth and Compliance. This ensures constant accuracy of the data through time and from one instrument to another. Nanovea achieves this high accuracy with some of the best comparative noise levels in the industry. The module provides nanometer scale testing during indentation, scratch and wear testing modes. Each mode of testing provides wide range of testing that can provide properties such as hardness, creep, elastic modulus, stress-strain curves, yield strength, fatigue, loss and storage modulus, fracture toughness, wear rate, friction coefficient, scratch and marring resistance, plastic/elastic deformation among other tests. In combination with integrated x-y motorized table, one can test at very specific locations or do a full mapping of properties across a chosen area. In fact, the unique design of the nano module with the piezo actuator allows accurate indents to be performed in less than 3 seconds making mapping possible within minutes. The Nano module is ideal for accurately characterizing thin industrial coatings or films. Examples include thin polymer coatings for the medical device industry and various thin coatings for the solar and optical lens industries. Another major application of the nano module is the marring of top surfaces such as varnish clear coats used in the automobile industry and other protective coatings used on portable devices such as mobile electronics. The Nano Module has been designed for high thermal stability with raw data uncorrected thermal drift of < 0.02 nm/sec. At high temperature, the oven provides uniform temperature of the tip and the sample for increased accuracy and lower levels of drift with no compensation. When used with the high temperature oven, the Nano module is designed with MACOR with low thermal expansion coefficient material of < 10-6 / C. This reduces any thermal drift at high temperature. Nanoindentation Scratch Adhesion Wear Friction

7 During Nanoindentation, an indenter tip is driven into the sample by applying an increasing load up to a targeted value. The measured load is then gradually decreased until partial, or complete, relaxation of the sample has occurred. The load and depth from independent sensors are recorded continuously throughout this process to produce a load-displacement curve. Adding a pause at maximum load allows studying of creep properties. DMA (Dynamic Mechanical Analysis) and Continuous Stiffness Measurement (CSM) Oscillation mode allows the measurements of visco-elastic properties, stress-strain curves and all properties versus depth. NANOINDENTATION Standards: ASTM E384 ASTM G171 ASTM E2546 ASTM B933 ASTM D4065 ISO DIN Properties Analyzed During Nanoindentation: Hardness Elastic modulus Hardness & Elastic Modulus vs Temperature or Humidity Creep & Stress Relaxation with constant load and depth control Stress-Strain Curve from Continuous Stiffness (CSM) and Multi-Load Cycles Recovery Depth Restoration Ratio Loss and Storage Modulus Fracture Toughness Yield Strength Compression Fatigue Puncture Resistance Adhesion Stickiness Frequency & Temperature Sweep DMA Martens Hardness vs Depth Plastic & Elastic Deformations Visual Vickers Hardness and many others possible Powerful DMA analysis at constant loading with frequency and temperature sweep Nanoindentation Software Features: Recipes Export Raw Data and Images Real Time Display Automatic Reporting Multi-Language Support Compare Curves and Results on Same or Multi Samples DMA and Continuous Stiffness True Depth and Load Feedback Control Loading Advanced Nanoindentation Automation: FastMap: Mapping of Hardness & Elastic Modulus (3 sec per indent) Broadview Map Selection Tool: Advanced Mapping on stitched image Automated multi-sample testing (handles height variance of up to 50mm) Navigation Plus: User Friendly surface navigation imaging Quick Approach, Auto Surface Detection and Auto Analysis Direct Easy Calibration Tools for Load & Depth Single Indent Area Function (European Patent No ) Quantifiable quality check for indenter (European Patent No ) Wizard (Patent Pending): Automatic Test Parameter generator Savable recipes of all macros programmed Low load depth versus load indentation 1mN with capability to go down to 40microN Indenters: (Diamond, WC and many other materials) Berkovich Vickers Cube Corner Conical-Spherical Knoop Knife 1 to 6mm balls Environmental Conditions & Sample(s) Holders: 275 C & 450 C Oven Down to -10 C Cooling Chamber Humidity Chamber Liquid Cups Custom 3 Point Bending or Puncture Custom Sample & Indenter Holders Unique 1 or 3mm ball holder for test on soft gels down to the single kpa

8 During Nano Scratch Testing, a conical spherical tip, diamond or WC, is drawn across the coated surface with an increasing load, resulting in various types of failure at specific critical loads. Nano Scratch Adhesion Testing identifies critical loads optically using a built-in video zoom microscope. These critical loads are used to quantify the adhesive and cohesive properties of different film/substrate combinations. In addition, failure points can be determined using frictional force and depth measurements. True Depth Measurements based on (European Patent No ) providing accurate elastic and plastic deformation. NANO SCRATCH Standards: ASTM D7187 ASTM C1624 ASTM D7027 ASTM G171 ISO ISO 1518 DIN EN 1071 Properties Analyzed During Nano Scratch: Cohesive & Adhesive failure Adhesion Strength Marring (Resistance) and Crack/Fracture initiation Plastic & Elastic Deformation depth and others Software Features: Recipes Export Raw Data and Images Real Time Display Automatic Reporting Multi-Language Support Failure Comparison Mapping Full Scratch Image for post inspection using tracking zoomed view Tracking Zoomed View for easy post inspection with data depth, friction analysis Advanced Nano Scratch Automation: Broadview Map Selection Tool: Advanced Mapping on stitched image Automated multi-sample testing (handles height variance of up to 50mm) Navigation Plus: User Friendly surface navigation imaging Quick Approach, Auto Surface Detection and Auto Analysis Direct Easy Calibration Tools for Load & Depth Single Indent Area Function (European Patent No ) Quantifiable quality check for indenter (European Patent No ) Wizard (Patent Pending): Automatic Test Parameter generator Savable recipes of all macros programmed Highly accurate friction force & coefficient measurements Highly accurate surface profile, scratch depth & residual depth measurements Indenters: (Diamond, WC and many other materials) Vickers Cube Corner Conical-Spherical Knife Environmental Conditions & Sample(s) Holders: 275 C & 450 C Oven Down to -10 C Cooling Chamber Humidity Chamber Liquid Cups Custom Sample & Indenter Holders Full scratch imaging for failure identification & analysis

9 During Nano Wear a pin or a ball is loaded onto a test sample with a stable weight with feedback control. Depth change is recorded precisely during the test using a precision capacitor. Wear rate is calculated with this information. Wear rates for the pin and the sample can also be calculated from the volume of material loss with an attached AFM or Optical Profilometer. Linear mode with friction measurement is possible with the standard x-y motorized table. The nano module can also be used to measure friction coefficient at very low loads. NANO WEAR Standards: ASTM G133 Properties Analyzed During Nano Wear: Wear Rates Fretting Wear Friction Coefficient Software Features: Recipes Export Raw Data and Images Real Time Display Automatic Reporting Multi-Language Support Fixed cycle view for friction/depth data at a specific chosen position versus cycle count Depth at various cycles during wear test Advanced Nano Wear Automation: Broadview Map Selection Tool: Advanced Mapping on stitched image Automated multi-sample testing (handles height variance of up to 50mm) Navigation Plus: User Friendly surface navigation imaging Quick Approach, Auto Surface Detection and Auto Analysis Direct Easy Calibration Tools for Load & Depth Savable recipes of all macros programmed Indenters: (Diamond, WC and many other materials) Conical-Spherical Vickers Knife 1 to 6mm balls Environmental Conditions & Sample(s) Holders: 275 C & 450 C Oven Down to -10 C Cooling Chamber Humidity Chamber Liquid Cups Custom Sample & Indenter Holders Highly accurate low load capacitive wear depth measurement Submerged nano friction test

10 MICRO MODULE Now the world s leading micro mechanical testing. Automatic, accurate and fast hardness and elastic modulus results obtained from depth versus load data are truly a giant leap compared to traditional hardness testers. This past century technology was based on visual inspection when accurate depth sensors were not available. Therefore, today there is absolutely no advantage with using outdated traditional hardness testers. The Micro Module is faster, easier, more accurate particularly at low loads, and more repeatable. Testing can be performed on any material including very elastic material or on surfaces where identifying the indent is challenging. Not only providing hardness and elastic modulus but also a wide range of testing such as creep, stress-strain curves, yield strength, fatigue, fracture toughness, scratch and marring resistance, plastic/elastic deformation, wear rate and friction coefficient. And for those using antiquated scratch testing instruments. These systems have a limited range of load and use cantilever load cells prone to side bending that can be seen in observing wavy scratches at high loads. Unlike the micro module that has been designed with a rigid compressive load cell and measures depth using a capacitor directly connected to the shaft holding the indenter. The result is the highest accuracy available on the market. The wide usable range of loads (5 orders of magnitude) of a single micro module makes it possible to do a high load scratch test, at up to 200N for a 5micron and up on a DLC, TiN, TiC coating, and then use a 50mN load to measure hardness and elastic modulus without the influence of the substrate. For thinner coatings down to sub microns, the 20N can be used in the same way with depth versus load down to the single digit mn but still do excellent scratch testing up to 20N. These more sensitive loads are ideal for the characterization of industrial coatings; ranging from plasma processed layers used in semiconductor and optical technology, to decorative and protective coatings used for automobile parts and consumer goods. Easy and fast to calibrate, the accuracy of the data through time and from one instrument to another is insured. High performance longevity with low maintenance cost and especially high accuracy comes standard. Microindentation Scratch Adhesion Wear Friction

11 During the Microindentation process an indenter tip is driven into the sample by applying an increasing load up to a targeted value. The measured load is then gradually decreased until partial, or complete, relaxation of the sample has occurred. The load and displacement are recorded continuously throughout this process to produce a load-displacement curve. Adding a pause at maximum load allows studying of creep properties. Other loading modes are possible including constant load multi-cycle for measuring fatigue or plastic-elastic deformation; and increasing load multi-cycle for obtaining properties versus depth. MICROINDENTATION Standards: ASTM E384 ASTM G171 ASTM E2546 ASTM B933 ISO DIN DIN ASTM D2240 ISO 7619 JISK7215 Properties Analyzed During Microindentation: Hardness Elastic Modulus Creep Stress-Strain Curve Fracture Toughness Yield Strength Compression Fatigue Puncture Resistance Martens Hardness vs Depth Plastic & Elastic Deformations Visual Hardness, Shore Hardness and many others possible. The widest & most accurate range of Microindentation available Software Features: Recipes Export Raw Data and Images Real Time Display Automatic Reporting Multi-Language Support Compare Curves and Results on Same or Multi Samples Advanced Microindentation Automation: FastMap: Mapping of Hardness & Elastic Modulus (3 sec per indent) Broadview Map Selection Tool: Advanced Mapping on stitched image Automated multi-sample testing (handles height variance of up to 50mm) Navigation Plus: User Friendly surface navigation imaging Quick Approach, Auto Surface Detection and Auto Analysis Direct Easy Calibration Tools for Load & Depth Single Indent Area Function (European Patent No ) Quantifiable quality check for indenter (European Patent No ) Wizard (Patent Pending): Automatic Test Parameter generator Savable recipes of all macros programmed Unique Yield Strength technique using a flat diamond indenter Indenters: (Diamond, WC and many other materials) Berkovich Vickers Cube Corner Conical-Spherical Knoop Knife 1 to 6mm balls Shore Hardness Tips Environmental Conditions & Sample(s) Holders: 275 C & 450 C Oven Down to -10 C Cooling Chamber Humidity Chamber Liquid Cups Custom 3 Point Bending or Puncture Custom Sample & Indenter Holders Multi cycle fatigue and failure

12 During Micro Scratch Testing, a conical spherical tip, diamond or WC, is drawn across the coated surface with an increasing load, resulting in various types of failure at specific critical loads. Micro Scratch Adhesion Testing identifies critical loads optically using a built-in video microscope. These critical loads are used to quantify the adhesive and cohesive properties of different film/substrate combinations. In addition, failure points can be determined using frictional force and depth measurements. Depth measurements provide the plastic and elastic portion of the deformation. Constant load scratch testing can be used, in mapping, to check the surface uniformity. True Depth Measurements based on (European Patent No ) providing accurate elastic and plastic deformation. MICRO SCRATCH Standards: ASTM D7187 ASTM C1624 ASTM D7027 ASTM G171 ISO ISO 1518 DIN EN 1071 Properties Analyzed During Micro Scratch: Cohesive & Adhesive failure Adhesion Strength Marring (Resistance) and Crack/Fracture initiation Plastic & Elastic Deformation depth and others Highly accurate friction, true depth & acoustic emissions measurement Software Features: Recipes Export Raw Data and Images Real Time Display Automatic Reporting Multi-Language Support Failure Comparison Mapping Full Scratch Image for post inspection using tracking zoomed view Tracking Zoomed View for easy post inspection with data depth, friction and AE analysis Advanced Micro Scratch Automation: Broadview Map Selection Tool: Advanced Mapping on stitched image Automated multi-sample testing (handles height variance of up to 50mm) Navigation Plus: User Friendly surface navigation imaging Quick Approach, Auto Surface Detection and Auto Analysis Direct Easy Calibration Tools for Load & Depth Single Indent Area Function (European Patent No ) Quantifiable quality check for indenter (European Patent No ) Wizard (Patent Pending): Automatic Test Parameter generator Savable recipes of all macros programmed Full scratch imaging for failure identification & analysis Indenters: (Diamond, WC and many other materials) Vickers Cube Corner Conical-Spherical Knife Environmental Conditions & Sample(s) Holders: 275 C & 450 C Oven Down to -10 C Cooling Chamber Humidity Chamber Cylinder over Cylinder Custom Sample & Indenter Holders Mapping with various loading options for failure identification

13 During Micro Wear Testing a pin or a ball is loaded onto a test sample with a stable weight with feedback control. Depth change is recorded precisely during the test using a precision capacitor. Wear rate is calculated with this information. Wear rates for the pin and the sample can also be calculated from the volume of material measured with an attached AFM or Optical Profilometer. Linear mode with friction measurement is possible with the standard x-y motorized table. The micro module can also be used to measure friction coefficient at very high loads. MICRO WEAR Standards: ASTM G133 Properties Analyzed During Micro Wear: Wear Rates Fretting Wear Friction Coefficient Software Features: Recipes Export Raw Data and Images Real Time Display Automatic Reporting Multi-Language Support Fixed cycle view for friction/depth data at a specific chosen position versus cycle count 3D surface measurement of freeting volume wear marks Advanced Micro Wear Automation: Broadview Map Selection Tool: Advanced Mapping on stitched image Automated multi-sample testing (handles height variance of up to 50mm) Navigation Plus: User Friendly surface navigation imaging Quick Approach, Auto Surface Detection and Auto Analysis Direct Easy Calibration Tools for Load & Depth Savable recipes of all macros programmed Indenters: (Diamond, WC and many other materials) Conical-Spherical Vickers Knife 1 to 6mm balls Environmental Conditions & Sample(s) Holders: 275 C & 450 C Oven Down to -10 C Cooling Chamber Humidity Chamber Liquid Cups Custom Sample & Indenter Holders Highly accurate wear rate measurement Friction at various cycles during wear test

14 Nanovea Mechanical Testers provide the widest range of accurate testing on a single system. And because so, the mechanical properties of virtually any coating, film or substrate material can be tested, whether hard or soft, thin or thick. Industries include: Bio & Biotechnology, Building Materials, Consumer Products, Medical, Metals, Oil & Mines, Optics, Paint & Coating, Pharmaceutical, Semiconductor/Electronic/Solar, Textiles/Leather/Paper, Tooling & Machinery and Transportation. APPLICATIONS

15 BASE Maximum # of Modules X&Y Motorized Stages XY Lateral Resolution Z Motorized Approach (range) Base Type Desktop Dimensions Stand-Alone Dimensions Zoom Video Microscope 3D Optical Profiler AFM High Speed Fretting Wear CB500 1 (Nano or Micro) 100 x 50mm 0.4µm (opt. 0.1µm) 50mm Desktop 38 x 33 x 70cm 1600 x 1200 Camera PB (Nano & Micro) 200x150mm 0.1µm 50mm (+ 140mm manual extra slide) Desktop or Stand Alone 62 x 62 x 82cm 92 x 92 x 183cm 1600 x 1200 Camera Optional Optional Custom up to 40 Hz MODULES Acquisition Rate Modes of Testing Loading System Load Sensor (independent from depth sensor) Force Range Force Resolution Force Noise Floor rms FastMap Depth Sensor Range Displacement Resolution Displacement Noise Floor rms Indenter Geometries Including Flat or Balls Up To* Friction Range Force Resolution Friction Noise Floor RMS Acoustic Emission Frequencies** Sensitivity of AE Absolute Energy DMA / CSM Frequencies Frequency & Temperature Sweep at Constant Load Temperature Oven*** Humidity Cold Temperature NANO 24bit Indentation, Scratch & Wear Piezo Electric Utra Sensitive Compressive Load Cell mN µN µN 5min (100 indents) Capacitor Ring µm 0.003nm 0.04nm 6mm mN µN µN kHz 0.005aJ 0.1 to 100Hz Yes C 20-80% Down to -10 C MICRO 24bit Indentation, Scratch & Wear Ball Screw Servo Motor Compressive Load Cell N µN µN 12min (100 indents) Large Area Capacitor 1mm w/ 50mm motor encoder 0.01nm 0.15nm 25mm N µN 1.2 2mN kHz 0.005aJ C 20-80% Down to -10 C *Larger balls or geometries with lighter materials are available **Other frequency range available, Nano only available under sample***specifications subject to change, please contact Nanovea for latest.

16 Today's Standard For Tomorrow's Materials. Firmly aligned with our vision, Nanovea aims to simplify advanced measurement technologies to stimulate materials engineering for the common good. Ease of use, advanced automation and the dedication to superior accuracy are the driving forces behind its full range of precision instruments. As a Trusted Quality Manufacturer, our Profilometers, Mechanical Testers & Tribometers can be found internationally in distinguished educational and industrial organizations ranging from automotive to cosmetic, biotechnology to medical devices and from microelectronics to space applications. Thousands of clients rely on our accurate & honest solutions, superior instruments and experienced laboratory and consulting services. The Profilometers are designed with leading edge Chromatic Confocal optical technology (axial chromatism) both ISO and ASTM compliant. Only Nanovea s Nano and Micro module on the Mechanical Testers have all modes of testing including indentation, scratch and wear; no interchange of modules needed. In order to give accurate and repeatable data, the Nanovea modules are designed with high quality leading edge technologies. This ensures durability with low cost of use. While the Tribometer provides highly accurate and repeatable wear and friction testing compliant to ISO and ASTM standards. Designed, at the core, with a self-tuned high quality motor with a 20bit internal speed and a 16bit external position (>0.006 ) encoder, the Tribometer provides an unmatched range of rotational speeds from 0.01 to 5000rpm.

HONEYCOMB MECHANICAL BEHAVIOR USING MACROINDENTATION

HONEYCOMB MECHANICAL BEHAVIOR USING MACROINDENTATION HONEYCOMB MECHANICAL BEHAVIOR USING MACROINDENTATION. Prepared by Duanjie Li, PhD 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials.

More information

EDGE CHIPPING RESISTANCE USING MACROINDENTATION TESTING

EDGE CHIPPING RESISTANCE USING MACROINDENTATION TESTING EDGE CHIPPING RESISTANCE USING MACROINDENTATION TESTING Prepared by Ali Mansouri 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials.

More information

Scratch Testers. Coating Adhesion, Scratch and Mar Resistance. ::: World Leader in Scratch Testing

Scratch Testers. Coating Adhesion, Scratch and Mar Resistance. ::: World Leader in Scratch Testing Scratch Testers Coating Adhesion, Scratch and Mar Resistance ::: World Leader in Scratch Testing Anton Paar Scratch Testers Anton Paar is the world leader in the field of material characterization of surfaces,

More information

T50 MODULE OPTIONS. 60 x 39 x 62cm

T50 MODULE OPTIONS. 60 x 39 x 62cm TRIBOMETERS The Tribometers provide highly accurate and repeatable wear and friction testing compliant to ISO and ASTM standards. Now available as a stand alone dual controlled load or traditional desktop

More information

YIELD & TENSILE STRENGTH OF STEEL & ALUMINIUM USING MICROINDENTATION

YIELD & TENSILE STRENGTH OF STEEL & ALUMINIUM USING MICROINDENTATION YIELD & TENSILE STRENGTH OF STEEL & ALUMINIUM USING MICROINDENTATION Prepared by Duanjie Li, PhD & Pierre Leroux 6 Morgan, Ste156, Irvine CA 9618 P: 949.461.99 F: 949.461.93 nanovea.com Today's standard

More information

Nano Puncture Resistance Using Nanoindentation

Nano Puncture Resistance Using Nanoindentation Nano Puncture Resistance Using Nanoindentation Prepared by Jorge Ramirez 6 Morgan, Ste156, Irvine CA 9618 P: 949.461.99 F: 949.461.93 nanovea.com Today's standard for tomorrow's materials. 011 NANOVEA

More information

CONTROLLED HUMIDITY NANOINDENTATION OF POLYMER FILMS

CONTROLLED HUMIDITY NANOINDENTATION OF POLYMER FILMS CONTROLLED HUMIDITY NANOINDENTATION OF POLYMER FILMS Load (mn) 10 8 6 4 5 % Humidity 35 % Humidity 45 % Humidity 55 % Humidity 65 % Humidity 75 % Humidity 0 0.0 0. 0.4 0.6 0.8 1.0 1. 1.4 1.6 Displacement

More information

ELASTIC-PLASTIC RESPONSE OF POLYMER COATING UNDER REPETITIVE IMPACT

ELASTIC-PLASTIC RESPONSE OF POLYMER COATING UNDER REPETITIVE IMPACT ELASTIC-PLASTIC RESPONSE OF POLYMER COATING UNDER REPETITIVE IMPACT Prepared by Duanjie Li, PhD & Braden Altstatt 6 Morgan, Ste156, Irvine CA 9618 P: 949.461.99 F: 949.461.93 nanovea.com Today's standard

More information

INDIAN INSTITUTE OF TECHNOLOGY BOMBAY MATERIALS MANAGEMENT DIVISION

INDIAN INSTITUTE OF TECHNOLOGY BOMBAY MATERIALS MANAGEMENT DIVISION Micro-hardness and scratch testing system with Video Microscope Motion table performance We intend to purchase Micro-hardness and scratch testing system with Video Microscope Motion table performance testing

More information

NANOINDENTATION CREEP MEASUREMENT

NANOINDENTATION CREEP MEASUREMENT NANOINDENTATION CREEP MEASUREMENT Prepared by Jorge Ramirez 6 Morgan, Ste156, Irvine CA 9618 P: 949.461.99 F: 949.461.93 nanovea.com Today's standard for tomorrow's materials. 010 NANOVEA INTRO Creep can

More information

AMMONITE FOSSIL MECHANICAL PROPERTIES USING NANOINDENTATION

AMMONITE FOSSIL MECHANICAL PROPERTIES USING NANOINDENTATION AMMONITE FOSSIL MECHANICAL PROPERTIES USING NANOINDENTATION Prepared by Duanjie Li, PhD 6 Morgan, Ste156, Irvine CA 9618 P: 949.461.99 F: 949.461.93 nanovea.com Today's standard for tomorrow's materials.

More information

CORROSION HARDNESS EFFECT OF STEEL SCREWS BY NANOINDENTATION

CORROSION HARDNESS EFFECT OF STEEL SCREWS BY NANOINDENTATION CORROSION HARDNESS EFFECT OF STEEL SCREWS BY NANOINDENTATION Prepared by Duanjie Li, PhD 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials.

More information

CSM Nano-Tribometer *

CSM Nano-Tribometer * CSM Nano-Tribometer * Features of the Nano-Tribometer CALL US for a DEMO! Laboratory Service Also Available High Resolution attained with unique glass spring force sensor design Ultra-precision piezo actuated

More information

Evaluation of Mechanical Properties of Hard Coatings

Evaluation of Mechanical Properties of Hard Coatings Evaluation of Mechanical Properties of Hard Coatings Comprehensive mechanical testing of two coated metal samples was performed on the UNMT- 1. The tests clearly distinguished brittle and ductile samples,

More information

NANOINDENTATION OF SILICON CARBIDE WAFER COATINGS

NANOINDENTATION OF SILICON CARBIDE WAFER COATINGS NANOINDENTATION OF SILICON CARBIDE WAFER COATINGS Prepared by Jesse Angle 6 Morgan, Ste156, Irvine CA 9618 P: 949.461.99 F: 949.461.93 nanovea.com Today's standard for tomorrow's materials. 010 NANOVEA

More information

M3 Review Automated Nanoindentation

M3 Review Automated Nanoindentation M3 Review Automated Nanoindentation Prepared by Duanjie Li, PhD & Pierre Leroux 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials.

More information

Nano Wear Testing Polymer Coated Glass

Nano Wear Testing Polymer Coated Glass Nano Wear Testing Polymer Coated Glass Prepared by Jorge Ramirez 6 Morgan, Ste56, Irvine CA 9268 P: 949.46.9292 F: 949.46.9232 nanovea.com Today's standard for tomorrow's materials. 2 NANOVEA INTRO New

More information

Friction, Wear, and Lubrication

Friction, Wear, and Lubrication Friction, Wear, and Lubrication Product Tribometers name Unique Portfolio Biggest Influencing Factors Anton Paar develops, produces, distributes, and provides support for analytical instruments used in

More information

Center for Tribology, Inc. COMPREHENSIVE MATERIALS TESTING FOR MECHANICAL AND TRIBOLOGICAL PROPERTIES

Center for Tribology, Inc. COMPREHENSIVE MATERIALS TESTING FOR MECHANICAL AND TRIBOLOGICAL PROPERTIES C ET R WWW.CETR.COM Center for Tribology, Inc. COMPREHENSIVE MATERIALS TESTING FOR MECHANICAL AND TRIBOLOGICAL PROPERTIES Micro/Nano Indentation Micro/Nano Scratch Wear Friction Lubrication Environmental

More information

Tablet Coating Failure Using Micro Scratch Testing

Tablet Coating Failure Using Micro Scratch Testing Tablet Coating Failure Using Micro Scratch Testing Prepared by Jorge Ramirez 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials. 2011

More information

CSM Instruments. //// Instrumented Indentation, Scratch and Tribology

CSM Instruments. //// Instrumented Indentation, Scratch and Tribology CSM Instruments //// Instrumented Indentation, Scratch and Tribology 1 12 //// CSM Instruments CSM Instruments SA is a Swiss company based in Peseux, Switzerland. All instruments are Swiss made and tested

More information

Installation, Commissioning and Acceptance Testing of a High Temperature Ultra Nanoindentation Tester

Installation, Commissioning and Acceptance Testing of a High Temperature Ultra Nanoindentation Tester JRC Technical Systems Installation, Commissioning and Acceptance Testing of a High Temperature Ultra Nanoindentation Tester A. Ruiz Moreno, S. Ripplinger 2015 Report EUR 26988 EN European Commission Joint

More information

MICROINDENTATION & FRACTURE OF MINERAL ROCK

MICROINDENTATION & FRACTURE OF MINERAL ROCK MICROINDENTATION & FRACTURE OF MINERAL ROCK Prepared by Jorge Ramirez 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today s standard for tomorrow s materials. INTRO The

More information

Hysitron TI 980 TriboIndenter. Innovation with Integrity. Tribology and Mechanical Testing

Hysitron TI 980 TriboIndenter. Innovation with Integrity. Tribology and Mechanical Testing Hysitron TI 980 TriboIndenter World s Most Advanced Nanomechanical and Nanotribological Testing Innovation with Integrity Tribology and Mechanical Testing Hysitron TI 980 TriboIndenter Accelerate Nanomechanical

More information

Hysitron TI 980 TriboIndenter. Innovation with Integrity. Tribology and Mechanical Testing

Hysitron TI 980 TriboIndenter. Innovation with Integrity. Tribology and Mechanical Testing Hysitron TI 980 TriboIndenter World s Most Advanced Nanomechanical and Nanotribological Testing Innovation with Integrity Tribology and Mechanical Testing Hysitron TI 980 TriboIndenter Accelerate Nanomechanical

More information

ARC RECIPROCATING WEAR AT HIGH TEMPERATURE

ARC RECIPROCATING WEAR AT HIGH TEMPERATURE ARC RECIPROCATING WEAR AT HIGH TEMPERATURE Prepared by Duanjie Li, PhD 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials. 2016 NANOVEA

More information

Vickers Berkovich Knoop Conical Rockwell Spherical Figure 15 a variety of different indenter's shapes and sizes

Vickers Berkovich Knoop Conical Rockwell Spherical Figure 15 a variety of different indenter's shapes and sizes Hardness Test of Ceramic materials Hardness is a measure of a materials resistance to penetration by a hard indenter of defined geometry and loaded in prescribed manner, it is one of the most frequently

More information

Mechanical Characterization of Sol-Gel Coatings Using a Nano Indenter G200

Mechanical Characterization of Sol-Gel Coatings Using a Nano Indenter G200 Mechanical Characterization of Sol-Gel Coatings Using a Nano Indenter G200 Application Note Jennifer Hay Agilent Technologies Introduction This application note presents the results of nanomechanical tests

More information

UMT TriboLab TM for Automotive Applications Suresh Kuiry, Ph.D.

UMT TriboLab TM for Automotive Applications Suresh Kuiry, Ph.D. UMT TriboLab TM for Automotive Applications Suresh Kuiry, Ph.D. Introduction Safety Energy Efficiency Environmental Concerns Innovation in Automotive 2 Testing Introduction Product Differentiation Extent

More information

Identifying Cohesive Failure of Screen Protectors with Acoustic Emission

Identifying Cohesive Failure of Screen Protectors with Acoustic Emission Identifying Cohesive Failure of Screen Protectors with Acoustic Emission Prepared by Frank Liu 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's

More information

Full Nanomechanical Characterization of Ultra-Thin Films

Full Nanomechanical Characterization of Ultra-Thin Films APPLICATION NOTE By: Jeffrey Schirer and Julia Nowak, Ph.D. Hysitron, Inc. Eiji Kusano and Mune-aki Sakamoto Department of Chemistry, Kanazawa Institute of Technology, Japan Full Nanomechanical Characterization

More information

Center for Tribology, Inc. COMPREHENSIVE MATERIALS TESTING FOR MECHANICAL AND TRIBOLOGICAL PROPERTIES

Center for Tribology, Inc. COMPREHENSIVE MATERIALS TESTING FOR MECHANICAL AND TRIBOLOGICAL PROPERTIES C ET R WWW.CETR.COM Center for Tribology, Inc. COMPREHENSIVE MATERIALS TESTING FOR MECHANICAL AND TRIBOLOGICAL PROPERTIES Micro/Nano Indentation Micro/Nano Scratch Wear Friction Lubrication Environmental

More information

Tribological Characterization of Ti-WS2 Coating

Tribological Characterization of Ti-WS2 Coating Tribological Characterization of Ti-WS2 Coating Prepared by Johans Restrepo 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials. 2010

More information

INTEGRATED TRIBO-SPM FOR NANO-TRIBOLOGY

INTEGRATED TRIBO-SPM FOR NANO-TRIBOLOGY INTEGRATED TRIBO-SPM FOR NANO-TRIBOLOGY N. GITIS, A. DAUGELA, J. XIAO Center for Tribology Inc., 1715 Dell Ave., Campbell, CA 95008, USA, e-mail: info@cetr.com SUMMARY A novel quantitative nano+micro-tribometer

More information

NANO SCRATCH TESTING OF THIN FILM ON GLASS SUBSTRATE

NANO SCRATCH TESTING OF THIN FILM ON GLASS SUBSTRATE NANO SCRATCH TESTING OF THIN FILM ON GLASS SUBSTRATE Prepared by Jesse Angle 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials. 2010

More information

Rubber Hardness: Gibitre developments and technical market tendencies

Rubber Hardness: Gibitre developments and technical market tendencies VKRT Seminar 10-02-2011 Rubber Hardness: Gibitre developments and technical market tendencies Eng. Mauro Belloni Index Introduction about rubber hardness measure Available Instrument Configurations Technology

More information

Application Note #1007 All-Inclusive Scratch Testing of Coatings and Thin Films Using Bruker's Universal Test System

Application Note #1007 All-Inclusive Scratch Testing of Coatings and Thin Films Using Bruker's Universal Test System Scratch with ECR Scratch with E UMT TriboLab pplication Note #1007 ll-inclusive Scratch Testing of Coatings and Thin Films Using ruker's Universal Test System Coatings and thin films are being used increasingly

More information

NANO SCRATCH/MAR TESTING OF PAINT ON METAL SUBSTRATE

NANO SCRATCH/MAR TESTING OF PAINT ON METAL SUBSTRATE NANO SCRATCH/MAR TESTING OF PAINT ON METAL SUBSTRATE Prepared by Susana Cabello 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials.

More information

Nanoindentation, Scratch and nanodma : Innovations for Atomic Force Microscopes. Ryan Stromberg

Nanoindentation, Scratch and nanodma : Innovations for Atomic Force Microscopes. Ryan Stromberg Nanoindentation, Scratch and nanodma : Innovations for Atomic Force Microscopes Ryan Stromberg 09-07-2017 2 Outline Hysitron TriboScope Technology Mechanical Testing Indenter Stylus vs. AFM Cantilever

More information

Exceptional Technology for Material Science TT DMA. Dynamic Mechanical Analyser

Exceptional Technology for Material Science TT DMA. Dynamic Mechanical Analyser Exceptional Technology for Material Science TT DMA Dynamic Mechanical Analyser The Company Triton Technology Ltd was first established in 1997 to design, manufacture and sell a range of instrumentation

More information

Automatic hardness testing devices

Automatic hardness testing devices Automatic hardness testing devices The measure of hardness, applied to rubber and plastic, is a measure of stiffness obtained from an indentation test. An indentor is pressed into the sample under a given

More information

Tennessee State University College of Engineering and Technology Department of Mechanical Engineering

Tennessee State University College of Engineering and Technology Department of Mechanical Engineering Tennessee State University College of Engineering and Technology Department of Mechanical Engineering The Impact of Modeling, Simulation, and Characterization of the Mechanical Properties of Nano-materials

More information

Impact Tester. Ball Drop Easy operating falling dart instrument according ASTM D 1709 and ISO Instruments for mechanical testing.

Impact Tester. Ball Drop Easy operating falling dart instrument according ASTM D 1709 and ISO Instruments for mechanical testing. Ball Drop Easy operating falling dart instrument according ASTM D 1709 and ISO 7765-1 This testing instrument covers the determination of the energy that causes plastic film to fail under specified conditions

More information

High temperature nanoindentation up to 810 C: Experimental Optimization

High temperature nanoindentation up to 810 C: Experimental Optimization High temperature nanoindentation up to 810 C: Experimental Optimization N. X. Randall, M. Conte, B. Bellaton, Jarod Zhao Anton Paar TriTec SA, Rue de la Gare 4, Peseux CH2034, Switzerland nicholas.randall@anton-paar.com

More information

NanoForce -short note - Ilja Hermann October 24,

NanoForce -short note - Ilja Hermann October 24, www.bruker.com NanoForce -short note - Ilja Hermann October 24, 2016 1 System overview Microscope for inspection pre- and pre- and post-test Actuator housing Specimen tray Thermal/Acoustic/ Seismic hood

More information

Dynamic Nanoindentation Characterization: nanodma III. Ude Hangen, Ph.D

Dynamic Nanoindentation Characterization: nanodma III. Ude Hangen, Ph.D Dynamic Nanoindentation Characterization: nanodma III Ude Hangen, Ph.D. 2017-11-02 Displacement 11/02/2017 Bruker Confidential 2 nm mm mm Outline Elastic-Plastic vs. Viscoelastic Materials Response nanodma

More information

Small-Scale Mechanical Testing at Michigan Technological University Houghton, MI

Small-Scale Mechanical Testing at Michigan Technological University Houghton, MI Small-Scale Mechanical Testing at Michigan Technological University Houghton, MI The small-scale mechanical testing systems at Michigan Tech enable state-of-the-art ambient, non-ambient, in-operando and

More information

Nanoindentation. Kathy Walsh, Ph.D. Frederick Seitz Materials Research Laboratory University of Illinois at Urbana-Champaign

Nanoindentation. Kathy Walsh, Ph.D. Frederick Seitz Materials Research Laboratory University of Illinois at Urbana-Champaign Nanoindentation Kathy Walsh, Ph.D. Frederick Seitz Materials Research Laboratory University of Illinois at Urbana-Champaign Mechanical Testing: How does it respond when you poke it, squish it, or stretch

More information

Good Practice Guide for nanoindentation of nanoparticles embedded in a layer using an SEM in situ technique

Good Practice Guide for nanoindentation of nanoparticles embedded in a layer using an SEM in situ technique Sample preparation The particles to be tested were two sizes of silica spherical particles, nominally sized 300 nm and 100 nm in diameter, gold spherical particles, nominally sized 60 nm in diameter, and

More information

Transients of deformation at nanoscale observed in displacement controlled nanoindentation testing

Transients of deformation at nanoscale observed in displacement controlled nanoindentation testing Transients of deformation at nanoscale observed in displacement controlled nanoindentation testing Ude D. Hangen Hysitron Inc., Gottfried Hagen Strasse 60, 51105 Köln, Germany E-mail: uhangen@hysitron.com

More information

NEXUS 4000 SERIES. Vickers Hardness Tester

NEXUS 4000 SERIES. Vickers Hardness Tester NEXUS 4000 SERIES Vickers Hardness Tester VICKERS HARDNESS TESTERS NEXUS 4000 SERIES NEXUS 4000 LOAD CELL, CLOSED LOOP SYSTEM FEATURES High-end Vickers/Knoop/Brinell tester with low and high force ranging

More information

ME -215 ENGINEERING MATERIALS AND PROCESES

ME -215 ENGINEERING MATERIALS AND PROCESES ME -215 ENGINEERING MATERIALS AND PROCESES Instructor: Office: MEC325, Tel.: 973-642-7455 E-mail: samardzi@njit.edu PROPERTIES OF MATERIALS Chapter 3 Materials Properties STRUCTURE PERFORMANCE PROCESSING

More information

LINEAR RECIPROCATING TRIBOMETER

LINEAR RECIPROCATING TRIBOMETER LINEAR RECIPROCATING TRIBOMETER Materials, coatings and lubricants often encounter situations involving repeated back and forth (reciprocating) movements during operation. Such situations are seen in various

More information

Hardness Testing Instruments Product Line Overview

Hardness Testing Instruments Product Line Overview Hardness Testing Instruments Product Line Overview Bulletin 300 (US) FH-1 series combined hardness testers FH-001-0000 Rrockwell Load cell, closed loop Advanced user interface Scales A, B, C, D, E, F,

More information

Keysight T150 UTM. Universal Testing Machine. Data Sheet

Keysight T150 UTM. Universal Testing Machine. Data Sheet Keysight T150 UTM Universal Testing Machine Data Sheet Overview The Keysight Technologies, Inc. T150 UTM is a universal testing machine that offers researchers a superior means of nanomechanical characterization.

More information

Vickers Hardness Tester (Automatic Turret)

Vickers Hardness Tester (Automatic Turret) Vickers Hardness Tester (Automatic Turret) Micro-Vickers Hardness Tester (Automatic Turret) Micro-Vickers Hardness Tester (Automatic Turret) Vickers Hardness Tester (Automatic Turret) DIGITAL VHT-A9010ED

More information

Rubber Low Temperature Brittleness Tester TRBT-A10

Rubber Low Temperature Brittleness Tester TRBT-A10 No Rotor Rheometer TNRR-A10 Rubber Low Temperature Brittleness Tester TRBT-A10 DIN Abrasive Tester TDAT-A10 Mooney Viscometer TMV-A10 Rubber-Weiss plasticity Testing Machine TRWM-A10 www.labtron.com info@labtron.com

More information

Evaluation of Failure in Low-k Films Using Stiffness Mapping and Dynamic Imaging

Evaluation of Failure in Low-k Films Using Stiffness Mapping and Dynamic Imaging Evaluation of Failure in Low-k Films Using Stiffness Mapping and Dynamic Imaging Application Note Introduction Fracture toughness and scratch failure of thin films on the nano-scale is of particular interest

More information

Facilitating Sustainability through Surface Engineering by Measurement and Standards

Facilitating Sustainability through Surface Engineering by Measurement and Standards Facilitating Sustainability through Surface Engineering by Measurement and Standards M G Gee National Physical Laboratory 14 th June 2011 IMF Fair Thursday, 02 June 2011 1 Sustainability and Surface Engineering

More information

Brinell Rockwell Vickers. Hardness Tester (Manual)

Brinell Rockwell Vickers. Hardness Tester (Manual) Brinell Rockwell Vickers Hardness Tester (Manual) Brinell Rockwell Vickers Hardness Tester (Electric) Brinell Hardness Tester (Electronic) Brinell Rockwell Vickers Hardness Tester MANUAL BRV-9000M Test

More information

1. SCOPE 2. REFERENCED DOCUMENTS

1. SCOPE 2. REFERENCED DOCUMENTS Illinois Test Procedure 405 Effective Date: January 1, 2016 Determining the Fracture Potential of Asphalt Mixtures Using the Illinois Flexibility Index Test (I-FIT) 1. SCOPE 1.1. This test method covers

More information

stationary and portable hardness testers devices for testing layer thickness scratching resistance coating adhesion strength

stationary and portable hardness testers devices for testing layer thickness scratching resistance coating adhesion strength Automation and quality assurance in material testing BAQ stationary and portable hardness testers devices for testing layer thickness abrasion resistance scratching resistance coating adhesion strength

More information

Universal Cyclic Triaxial System

Universal Cyclic Triaxial System IPC Global Universal Cyclic Triaxial System The science of testing made easy EARTHQUAKE SIMULATION BLASTING SIMULATION WIND SIMULATION ROAD TRAFFIC SIMULATION RAIL TRAFFIC SIMULATION OCEAN WAVES SIMULATION

More information

Developing Positioning Systems for Pathology Scanners

Developing Positioning Systems for Pathology Scanners Developing Positioning Systems for Pathology Scanners By Boaz Eidelberg, Ph.D., Jim Monnich, Parker Daedal Engineered Solutions, Electromechanical Automation North America Pathological scanners have unique

More information

TRIBOCORROSION EVALUATION OF PROTECTIVE COATING

TRIBOCORROSION EVALUATION OF PROTECTIVE COATING TRIBOCORROSION EVALUATION OF PROTECTIVE COATING Prepared by Duanjie Li, PhD 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials. 2014

More information

The Thin-Film Experts MAKE GREAT PRODUCTS EVEN BETTER WITH VAPORTECH THIN-FILM DEPOSITION SYSTEMS

The Thin-Film Experts MAKE GREAT PRODUCTS EVEN BETTER WITH VAPORTECH THIN-FILM DEPOSITION SYSTEMS The Thin-Film Experts MAKE GREAT PRODUCTS EVEN BETTER WITH VAPORTECH THIN-FILM DEPOSITION SYSTEMS { Thin-Film Deposition / THin, film depә zish(ә) n/ DEFINED A vacuum process using an energy source to

More information

Enquiry Letter for Quotation of Bio-Tribometer

Enquiry Letter for Quotation of Bio-Tribometer Enq. No.: DST/MET/2017476/BIOT Enquiry Dated: Apr. 04, 2018 Closing Date: May 04, 2018 Page 1 Enquiry Letter for Quotation of Bio-Tribometer Sealed quotations (in two separate envelops namely TECHNICAL

More information

Repetition: Adhesion Mechanisms

Repetition: Adhesion Mechanisms Repetition: Adhesion Mechanisms a) Mechanical interlocking b) Monolayer/monolayer c) Chemical bonding d) Diffusion e) Psedo diffusion due to augmented energy input (hyperthermal particles) Repetition:

More information

WDW-100 Computerized Electronic Universal Testing Machine

WDW-100 Computerized Electronic Universal Testing Machine WDW-100 Computerized Electronic Universal Testing Machine 1. Application: It is applicable for wide range of material for tension, compression, bending, shearing and low cycle test. Suitable for metal,

More information

Mechanical Testing at UCSB

Mechanical Testing at UCSB Mechanical Testing at UCSB Mechanical Test Lab Mission The Mechanical Testing Laboratory is a campus-wide testing resource providing users from many departments access to physical test equipment to characterize

More information

BMS-500 / BMS-500E Computerized Electronic Universal Testing Machine

BMS-500 / BMS-500E Computerized Electronic Universal Testing Machine BMS-500 / BMS-500E Computerized Electronic Universal Testing Machine OPERATIONAL MANUAL BMS Bulut Makina Sanayi Ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No :

More information

BMS-300 / BMS-300E Computerized Electronic Universal Testing Machine

BMS-300 / BMS-300E Computerized Electronic Universal Testing Machine BMS-300 / BMS-300E Computerized Electronic Universal Testing Machine OPERATIONAL MANUAL BMS Bulut Makina Sanayi Ve Ticaret Ltd. Şti. İkitelli Organize Sanayi Bölgesi Dolapdere Sanayi Sitesi Ada 4 No :

More information

Series Rheometers for Controlled Rate/Stress Measurement

Series Rheometers for Controlled Rate/Stress Measurement BROOKFIELD _ VISCOMETERS / RHEOMETERS R/S Plus Series Rheometers for Controlled Rate/Stress Measurement R/S Plus Series of rheometers represent the best that Brookfield has to offer instruments that operate

More information

Servo-hydraulic Universal Testing Machine HUT Type B

Servo-hydraulic Universal Testing Machine HUT Type B Do Our Best for Your Test Servo-hydraulic Universal Testing Machine HUT Type B Load Frame Configuration: 6 columns, servo-controlled hydraulic Capacity: 300kN, 600kN, 1000kN, 3000kN Test Space: Dual zone

More information

High Temperature Mechanical Characterization of Tin (Sn) Using Nanoindentation

High Temperature Mechanical Characterization of Tin (Sn) Using Nanoindentation High Temperature Mechanical Characterization of Tin (Sn) Using Nanoindentation Application Note Bryan Crawford Agilent Technologies Introduction Soft metals that exhibit time dependent deformation can

More information

SERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES A

SERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES A SERVO-HYDRAULIC UNIVERSAL TESTING MACHINE SERIES A RoboTest Series A Servo-Hydraulic Universal Testing Machine feature servo-valve control of hydraulic power to perform accurate and reliable tension and

More information

#1Selling in. AMPT/SPT Asphalt Mixture Performance Tester. The Most Useful Tool Available for Evaluating HMA (Hot Mix Asphalt) IPC Global.

#1Selling in. AMPT/SPT Asphalt Mixture Performance Tester. The Most Useful Tool Available for Evaluating HMA (Hot Mix Asphalt) IPC Global. IPC Global AMPT/SPT Asphalt Mixture Performance Tester The Most Useful Tool Available for Evaluating HMA (Hot Mix Asphalt) #1Selling in USA and Worldwide The science of testing made easy INNOVATIVE DESIGN

More information

#1Selling in. AMPT/SPT Asphalt Mixture Performance Tester. The Most Useful Tool Available for Evaluating HMA (Hot Mix Asphalt) IPC Global.

#1Selling in. AMPT/SPT Asphalt Mixture Performance Tester. The Most Useful Tool Available for Evaluating HMA (Hot Mix Asphalt) IPC Global. IPC Global AMPT/SPT Asphalt Mixture Performance Tester The Most Useful Tool Available for Evaluating HMA (Hot Mix Asphalt) #1Selling in USA and Worldwide The science of testing made easy INNOVATIVE DESIGN

More information

IMPACT TESTER CONTACT CYCLIC TESTING

IMPACT TESTER CONTACT CYCLIC TESTING IMPACT TESTER CONTACT CYCLIC TESTING A.Kriz P. Benes Research Centre of Rail Vehicles, University of West Bohemia, Faculty of Mechanical Engineering Czech Republic The components in many industrial aplications

More information

FORCES IN BIOLOGY NANOINDENTER

FORCES IN BIOLOGY NANOINDENTER FORCES IN BIOLOGY NANOINDENTER COMPACT & POWERFUL MECHANICAL ANALYSIS IN PHYSIOLOGICAL CONDITIONS PICO-NEWTON FORCE RESOLUTION EXPLORE THE MECHANICS OF NATIVE AND ENGINEERED TISSUES MICRON-SCALE CONTACT

More information

Tribology Advanced Scratch Testing Applications -Suresh Kuiry, Ph.D.

Tribology Advanced Scratch Testing Applications -Suresh Kuiry, Ph.D. Tribology 101 - Advanced Scratch Testing Applications -Suresh Kuiry, Ph.D. Introduction Scratch Test - Introduction Various Types of scratch tests Brief description of Bruker UMT- Scratch Test Module Deciding

More information

Evaluation of surface coatings and layers by modern methods

Evaluation of surface coatings and layers by modern methods Evaluation of surface coatings and layers by modern methods Kříž A., Beneš P., Sosnová M., Hrbáček P. University of West Bohemia - Pilsen Department of Material Science and Technology 13th International

More information

Weight (%) Temperature ( C)

Weight (%) Temperature ( C) Weight (%) 100 80 60 40 20 0 0 100 200 300 400 500 600 Temperature ( C) Supplementary Figure 1. Thermal analysis of (UPyU) 3 TMP. Thermogravimetric analysis (TGA) curve of (UPyU) 3 TMP from 25 to 600 C.

More information

Zhafir Venus Series. Haitian Partner: ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee Ebermannsdorf Germany

Zhafir Venus Series. Haitian Partner: ZHAFIR PLASTICS MACHINERY GMBH Jubatus-Allee Ebermannsdorf Germany HAITIAN INTERNATIONAL HOLDINGS LIMITED Unit 1105 Level 11 Metroplaza Tower 2 223 Hing Fong RD Kwai Fong N.T haitian@mail.haitian.com www.haitian.com Haitian Partner: HT 070905-IV ZHAFIR PLASTICS MACHINERY

More information

METALS TESTING TECHNOLOGIES 1 (888)

METALS TESTING TECHNOLOGIES 1 (888) METALS TESTING TECHNOLOGIES 1 (888) 332-3582 METALS TESTING TECHNOLOGIES 1 (888) 332-3582 ELECTROMECHANICAL UNIVERSAL TESTING MACHINES 3 SERVO-HYDRAULIC - STATIC - UNIVERSAL TESTING MACHINES 4 PORTABLE

More information

Tribomechanical Properties of DLC Coatings Deposited by Magnetron Sputtering on Metallic and Insulating Substrates

Tribomechanical Properties of DLC Coatings Deposited by Magnetron Sputtering on Metallic and Insulating Substrates Tribomechanical Properties of DLC Coatings Deposited by Magnetron Sputtering on Metallic and Insulating Substrates Dr. Iván Fernández Martínez Indianapolis, May 10th, 2016 Diamond Like Carbon (DLC) Diamond-like

More information

Closed-loop system. Video imaging. Windows based. Touch screen. Super quality mechanics

Closed-loop system. Video imaging. Windows based. Touch screen. Super quality mechanics Closed-loop system Video imaging Windows based Touch screen Super quality mechanics CV Instruments Europe, latest addition on UNIVERSAL HARDNESS TESTING. Measuring hardness in various scales with ONE single

More information

surface metrology. As the world s leader in precise, noncontact, 3-D surface metrology, Zygo has continually

surface metrology. As the world s leader in precise, noncontact, 3-D surface metrology, Zygo has continually N E W V I E W 5 0 0 0 As the world s leader in precise, noncontact, 3-D surface metrology, Zygo has continually provided new advanced measurement capabilities to its existing line of powerful and reliable

More information

ROTARY SCRATCH TESTERS

ROTARY SCRATCH TESTERS ROTARY SCRATCH TESTERS Abstract The abrasion resistance of coated and uncoated surfaces is of great interest to experimental scientists. Scratches not only alter the surface properties and aesthetics,

More information

Keysight Technologies Laser Heated Tip and High Temperature Stage for G200 Nano Indenter. Data Sheet

Keysight Technologies Laser Heated Tip and High Temperature Stage for G200 Nano Indenter. Data Sheet Keysight Technologies Laser Heated Tip and High Temperature Stage for G200 Nano Indenter Data Sheet Overview The Nano Indenter G200 from Keysight Technologies, Inc. is the world s most flexible, and user-friendly

More information

ENGLISH UNIVERSAL BRINELL UNIVERSAL BRINELL UNIVERSAL BRINELL UNIVERSAL BRINELL UNIVERSAL BRINELL 75 YEARS HARDNESS TESTING

ENGLISH UNIVERSAL BRINELL UNIVERSAL BRINELL UNIVERSAL BRINELL UNIVERSAL BRINELL UNIVERSAL BRINELL 75 YEARS HARDNESS TESTING ENGLISH UNIVERSAL BRINELL UNIVERSAL BRINELL UNIVERSAL BRINELL UNIVERSAL BRINELL UNIVERSAL BRINELL WOLPERT GROUP WOLPERT Group manufactures a comprehensive range of hardness testers for over 75 years. Our

More information

GURU JAMBHESHWAR, UNIVERSITY OF SCIENCE & TECHNOLOGY, HISAR Department of Bio & Nano Tech. GJUS&T, Hisar.

GURU JAMBHESHWAR, UNIVERSITY OF SCIENCE & TECHNOLOGY, HISAR Department of Bio & Nano Tech. GJUS&T, Hisar. GURU JAMBHESHWAR, UNIVERSITY OF SCIENCE & TECHNOLOGY, HISAR INVITATION FOR QUOTATION You are invited to submit your most competitive quotation for the following goods with item wise detailed specifications

More information

MRSI-175Ag Epoxy Dispenser

MRSI-175Ag Epoxy Dispenser MRSI-175Ag Epoxy Dispenser Applications: Microwave & RF Modules MEMS Semiconductor Packaging Multi-Chip Modules Hybrid Circuits Optical Modules Overview The MRSI-175Ag Conductive Epoxy Dispenser handles

More information

Thermal Analysis Excellence

Thermal Analysis Excellence Thermal Analysis Excellence DMA 1 STAR e System Innovative Technology Versatile Modularity Swiss Quality Dynamic Mechanical Analysis Comprehensive Materials Characterization DMA Excellence Multipurpose

More information

Roboze one. Roboze. The only Beltless 3D printer with a real 25 micron layer THE MOST ACCURATE FFF 3D PRINTER NOW WITH 10 MATERIALS CAPABILITY

Roboze one. Roboze. The only Beltless 3D printer with a real 25 micron layer THE MOST ACCURATE FFF 3D PRINTER NOW WITH 10 MATERIALS CAPABILITY Roboze one THE MOST ACCURATE FFF 3D PRINTER NOW WITH 10 MATERIALS CAPABILITY Roboze The only Beltless 3D printer with a real 25 micron layer Roboze 2 Beltless Roboze Technology New stainless steel extruder

More information

1 nanometer can be the difference ELECTRONICS COATINGS XRF ANALYZERS

1 nanometer can be the difference ELECTRONICS COATINGS XRF ANALYZERS 1 nanometer can be the difference ELECTRONICS COATINGS XRF ANALYZERS 1 nanometre can be the difference Drawing on our 40 years experience of providing coatings analysis solutions to a range of industries,

More information

AUSTRACK -Accelerated Pavement Tester (APT)

AUSTRACK -Accelerated Pavement Tester (APT) IPC Global AUSTRACK -Accelerated Pavement Tester (APT) Full Scale / Extra Large / Large - Wheel Tracker & Roller Compactor The science of testing made easy LABORATORY SIZED ACCELERATED PAVEMENT TESTER

More information

For handling vibration, negative-stiffness isolators can offer big improvement over air tables

For handling vibration, negative-stiffness isolators can offer big improvement over air tables R&D Magazine June 2010 Test, Measurement & Analysis - Tools of the Trade For handling vibration, negative-stiffness isolators can offer big improvement over air tables By Jim McMahon For almost forty years

More information