PSG, TSG, SGS, SR Corrosion-resistant PFA and PTFE lining Indication of flow even at very low flow rates Optionally with integrated check valve

Richter Bellows-sealed Globe Control Valves

Richter Bellows-sealed Globe Control Valves RSS NEW: Size DN 50/6 Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty bellows Special designs for chlorine and high-purity media

Safety down to the last detail

Safety down to the last detail THE RICHTER PRODUCT RANGE Chemical process pumps, shut-off, control and safety valves for corrosive, hazardous, contaminated, pure and high-purity fluids Our contribution

Richter Heavy Duty Lined Mag-Drive ASME/ANSI Pumps

Richter Heavy Duty Lined Mag-Drive ASME/ANSI Pumps MNKA Dry-run optimised SAFEGLIDE PLUS plain bearings Corrosion-resistant PFA/PTFE -3 to 8 C (- to 36 F) MNKA Richter heavy duty lined mag-drive ASME/ANSI

Chlor-alkali Electrolysis

Chlor-alkali Electrolysis Richter Process Pumps, Valves and Control Equipment Highly corrosion resistant Raw to ultra-pure NaCl, NaOH, NaOCl, H2SO4, HCl, wet and dry Cl2 gas -75 to +400 F (-60 to +200

Diaphragm seal with flange connection With internal diaphragm, threaded design Model

Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,

Diaphragm seal with flange connection With internal diaphragm Model

Diaphragm seals Diaphragm seal with flange connection With internal diaphragm Model 990.26 WIKA data sheet DS 99.26 for further approvals see page 7 Applications Aggressive, highly viscous, crystallising

- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.

PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically

GD Valves Rubber Lined - Centric EVS. Wouter Witzel - EVS /

DESIGN Body Flangeless wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E JIS 5K/10K/16K Face to Face EN558-1/2

Worcester Controls E51/52. Enviro-Safe High Integrity Flanged Ball Valves

Worcester Controls E1/2 Enviro-Safe High Integrity Flanged Ball Valves General Description With environmental protection and control established as a major issue for the future, Flowserve Worcester Controls

KLINGER Ballostar KHE: This ball valve offers more

KLINGER Ballostar KHE Split body ball valve DN (1/2 ) 0 ( ) Edition 10 Tel. + (0)2252 600-0 Fax + (0)2252 600- Web: www.klinger.kfc.at KLINGER Ballostar KHE: This ball valve offers more The design of

AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS)

AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS) Double Flanged type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16 DESIGN Body Double Flanged type End Connection EN 1092 PN

XMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor

Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 00 mbar up to 0... 00 bar Output

XMP i. Precision Pressure Transmitter for the Process Industry with HART -Communication. Stainless Steel Sensor

Precision Pressure Transmitter for the Process Industry with HART -Communication Stainless Steel Sensor accuracy according to IEC 0770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 00 bar Output

Weir Valve Selections

Unlined Metal Excellent Cvs Complete Selection of End Connections ASTM Materials Include: Cast Iron ASTM A-126 Class B Ductile Iron ASTM A-395 Grade 60-40-18 Cast Steel ASTM A-216 Grade WCB 316 Stainless

Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body

Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications : Ductile iron disc All positions Low

Process Inline Filter, Change-Over

Process Inline Filter, Change-Over -503-130x -520x 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Inline filters, types PRFL and duplex inline filters are designed for process engineering and chemical plants.

JACOBY-TARBOX. Compliance Out of the Box ASTM PED CRN. 100 years of Quality! DIN. Increase duty cycle Minimize down time

NEW JACOBY-TABOX 100 years of Quality! Increase duty cycle Minimize down time Maximize process output Consistent performance Compliance Out of the Box Section VIII B2.1 B16.5 B31.1 B31.3 ASTM ASME BPE

DISCOCHECK Dual-Plate Check Valves BB Short overall length according to DIN EN 558-1, table 11, series 16 (=^ DIN 3202, part 3, series K3)

pplication and Type PN pplication for liquids, gases and vapours Ø D 80 BB EN BB SME PN Class 150 suitable for heating, air-conditioning, water supply and cooling installations,for applications where minimum

SECTION TAPPING SLEEVES AND VALVES

SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK

UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves

UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.

Compact CATALOG. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com

Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Valve Finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High

Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1

87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4

Baumann 24000F Wafer Body Control Valve

24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide

D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves

TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed

Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2

88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM

corrosive applications

Vanéflex Expansion Joints Maintenance and downtime in various industries are unwelcome due to significant amount of wasted capital. Vanéflex multi-laminated PTFE expansion joints are designed for corrosive

Regulating valves REG 6-65, REG-SS 15-40

MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves

12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping

MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including

87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1

87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316

87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -

87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball

KEYSTONE SWING TYPE WAFER CHECK VALVE FIGURE 86

High capacity, spring loaded swing type wafer check valve FEATURES Lightweight, wafer type check valve with face-to-face dimensions according ISO 5752, table 5 long High flow capacity featuring a special

VIKING BOLTED-LID BASKET-TYPE LINE STRAINERS

Page 642.1 LOW PRESSURE DROP EASY TO CLEAN LIGHT IN WEIGHT SMALL IN OVERALL DIMENSION VIKING QUALITY DUCTILE CONSTRUCTION Series Description Viking Bolted-Lid Simplex Strainers provide protection for your

CONA -Universal ANSI / CONA -Connector ANSI

CONA -Universal ANSI for quick assembly/disassembly on CONA -Connector or foreign system connectors CONA -Universal ANSI / CONA -Connector ANSI CONA B-Universal ANSI Bimetallic steam trap ANSI CONA M-Universal

ISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries

INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries

brands you trust. Tufline Lined Ball Valves

brands you trust. Tufline Lined Ball Valves Materials Of Construction Part 911 &944 911XP & 944XP Valves Only Ball PFA Lined Steel or Ductile Iron PFA Lined Steel or Ductile Iron Body & Tail PFA

We Offer Both Cast Ball Valves & Forged Ball Valves.

11 GENEL SCREWED END BALL VALVES / FORGED BALL VALVES V-155 THREE PIECES BALL VALVES V-255 Full port : 1/4 2-1/2 (DN8-DN65) : 3/8 2-1/2 (DN10-DN65), Anti-static design ASTM A351 Gr.CF8M (1.4408) Full port

THE MICROFLOW SENSOR MICROFLOW SENSOR WITH A WIDE RANGE OF APPLICATIONS THANKS TO THE AVAILABILITY OF DIFFERENT CONNECTION TYPES

THE MICROFLOW SENSOR MICROFLOW SENSOR WITH A WIDE RANGE OF APPLICATIONS THANKS TO THE AVAILABILITY OF DIFFERENT CONNECTION TYPES The manufacturer guarantees only English text. Available on our web site:

COMBINATION AIR VALVE

MINING DIVISION COMBINATION AIR VALVE FOR HIGH FLOW D-6NS SERIES DESCRIPTION The D-6NS Series Combination Air Valve has the features of both an air release valve and an air & vacuum valve. The air release

CROSBY H-SERIES DIRECT SPRING SAFETY VALVES

DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications

x act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.

Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output

Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification

Immersion Assembly for ph and Redox Sensors DipFit P CPA 140

Technical Information TI 178C/07/en No. 5008898 Immersion Assembly for ph and Redox Sensors DipFit P CPA 10 Immersion assembly with flange connection for demanding processes. Sensor holder with bayonet

Penberthy models RH and TH direct reading liquid level gages

High pressure flat glass gages in reflex and transparent styles Features General application RH High pressure gages are designed to be used in direct reading liquid level measurement for high pressure

Mechatronic pressure measurement. Applications. Special features. Description

Mechatronic pressure measurement Diaphragm pressure gauge with switch contacts Model 432.56, high overload safety up to 100 bar Model 432.36, safety version, high overload safety up to 400 bar WIKA data

PTFE BELLOWS POLY FLUORO LTD. POLY FLUORO LTD.260A. Bommasandra Industrial Area, Hosur Road, Bangalore TECHNICAL SPECIFICATION

PTFE BELLOWS TECHNICAL SPECIFICATION 1. MATERIALS 1.1 PTFE Only virgin (not reprocessed) PTFE conforming to ASTM D 1457, type III, IV or V shall be used for the production of bellows; the PTFE raw material

x act i Precision Pressure Transmitter for Food Industry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to IEC 60770: 0.

Precision Pressure Transmitter for Food ndustry, Pharmacy and Biotechnology Stainless Steel Sensor accuracy according to EC 60770: 0. % FSO Nominal pressure from 0... 400 mbar up to 0... 40 bar Output

Corrosion Resistant Products for the Chlor-Alkali Industry

Corrosion Resistant Products for the Chlor-Alkali Industry PureFlex, Inc. Founded in 1994 Products Fluoropolymer Hoses Composite Valves Specialty PTFE Gaskets FEP Sight Tube Composite Flanges Ethylene,

Engineering Data Pack HD Industrial Duty Pumps

Engineering Data Pack HD Industrial Duty Pumps Version. Excellence at work. Excellence in life. Table of Contents 0A Pump Mounting Dimensions 0A Pump Mounting Dimensions with Flanged Ports Flanged Port

1301 Series High-Pressure Regulators

1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk

ASME B31.3 Process Piping

ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. Nonmetallic Piping - 1 Piping Development Process 1. Establish applicable system standard(s)

Butterfly Valves - Figure 611 & 612

F611 Wafer style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. F612 Lugged style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. Features

Cast Iron Sluice Gates Rugged Dependability in Demanding Applications

Cast Iron Sluice Gates Rugged Dependability in Demanding Applications A Proud Tradition Since 1840, the team at Rodney Hunt has pioneered safe and reliable flow control systems to help communities and

Float Flow Meters series NF

Float Flow Meters series NF - Quality design - High corrosion resistance - Reliable measurement principle - Low weight and small dimensions Doc. no.: 22, en_cat_nf, 8/2015 Usage Flowmeters type NF are

PARTS & ACCESSORIES: EATON DUPLEX BASKET STRAINERS FEATURES OPTIONS MODEL 53BTX DUPLEX (3/4 TO 4 ) MODEL 50 DUPLEX (5, 6, 8 )

PARTS & ACCESSORIES: MODEL BTX & 0 Section 64 Page 64. Issue E FEATURES MODEL BTX DUPLEX (/4 TO 4 ) Dynamic sealing design for long life Easy-to-operate lever handle no gear box required Unique seat and

BULLETIN MARCH DeZURIK VPB V-PORT BALL VALVES TECHNICAL SPECIFICATIONS

BULLETIN.00-2 MRCH 20 ezurik VPB V-PORT BLL VLVES TECHNICL SPECIFICTIONS 2 20 ezurik, Inc. Materials of Construction Flanged Construction 1 20" (25 500mm) Class 0 1 (25 300mm) Class 300 etailed (Enlarged)

OPTIMASS 7400 Technical Datasheet

OPTIMASS 7400 Technical Datasheet Sensor for mass flow The optimum meter for demanding applications A single straight measuring tube Choice of 4 tube materials The documentation is only complete when used

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape

NOTICE OF DISCONTINUATION,

Sizes ", ", ", 6", 8", " NOTICE OF DISCONTINUATION, Effective May st Mueller Systems is discontinuing our current line of strainers. We will continue to offer our plate strainers on a first come, first

4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT

AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design

Series 5500 Bellows Pump Connectors Catalog 474E

Series 5500 Bellows Pump Connectors Catalog 474E Series 5500 Bellows Pump Connectors Sizes 1-1 /2 through 24 Design Conditions: full vacuum to 150 and 300 psig at 500 F Compact design with maximum flexibility

Tubes et tuyaux techniques Polígono Indutrial O Rebullón s/n Mos - España -

Technical Tubes et tuyaux techniques Tubing & Hose Flexible Tubes souples Calibrated calibrés Tubing 3-13 Polígono Indutrial O Rebullón s/n. 31 - Mos - España - rodavigo@rodavigo.com Fireproof High Resistance

VersaFlow Coriolis 1000 Mass Flow Sensor Specifications

VersaFlow Coriolis 1000 Mass Flow Sensor Specifications 34-VF-03-03 June 2012 The Superior Solution The VersaFlow mass flow sensor is the only mass flow sensor with a straight measuring tube that is available

ASME B31.3 Process Piping. 19. What s Different in B31.1

ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. What s Different in B31.1-1 19. What s Different in B31.1 Scope Organization of the Code

www.polyvalveusa.com 1 Why use Polyvalve Poly-Gas Valves? Polyvalve Poly-Gas valves are everything you d expect from the company that invented polyethylene valves. Millions of Polyvalve Poly-Gas valves

H series. for upper balconies DN 100. DN 100 Vers. a X X. Partial unit Side drain

instructions LORO direct balcony drains with connecting sleeve, EN 123-compliant, Steel, hot-dip galvanised, additionally coated, and DN 100 System overview for balcony storeys one-piece for upper balconies

1/2 2-1/2 (DN 15 65) STANDARD PORT AND 1/2 2 (DN 15 50) FULL PORT SERIES 4000 BALL VALVES Threaded End Socket Weld Butt Weld

1/ -1/ (DN 1 ) STANDARD PORT AND 1/ (DN 1 ) FULL PORT SERIES 000 BALL VALVES Threaded End Socket Weld Butt Weld The JAMESBURY Series 000 ball valves offer the three most desirable attributes of high-quality

diaphragm valves DV1 Series 2-Way Diaphragm Valves Typical Applications Analytical Instrumentation Petrochemical Pharmaceutical Chemical

DV1 Series 2-Way Diaphragm Valves The DV1 Series Diaphragm Valves are totally free of springs, bellows, packing, o-rings and lubricants in the process wetted area. Metal-to-metal seals to atmosphere ensure

289 Series Spring-Loaded Relief Valves

89 Series Spring-Loaded Relief Valves Bulletin 71.4:89 April 1 W187_1 W1871 type 89L 1 NPT TYPEs 89H and 89HH W187 NPT TYPE 89H Figure 1. Types 89H, 89L, and 89U Relief Valves W187_ types 89U and 89A Introduction

WILLBRANDT PTFE Expansion Joint Type 80

WILLBRANDT PTFE Expansion Joint Type 0 00 Type 0 is a 3 or corrugated PTFE expansion joint that is hotformed under pressure from extruded PTFE tubing. The fibers are executed without interruption. It is

Autogas Series. Regenerative Turbine Coro-Flo Pumps For High Differential Pressure Applications Using LPG and Other Liquefied Gases.

Autogas Series Regenerative Turbine Coro-Flo Pumps For High Differential Pressure Applications Using LPG and Other Liquefied Gases motralec 4 rue Lavoisier. ZA Lavoisier. 95223 HERBLAY CEDEX Tel. : 01.39.97.65.10

SEALING SOLUTIONS FOR THE PROCESS INDUSTRY

SEALING SOLUTIONS FOR THE PROCESS INDUSTRY INDUSTRY KNOW-HOW AND SPECIFIC SEALING SOLUTIONS THROUGH MARKET SEGMENT ORIENTATION SOLUTIONS FOR THE FOOD INDUSTRY The food industry includes a wide variety

Available End Connections & Size Range

ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412

Fisher EZ Sliding-Stem Control Valve

EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style

Cash Valve. Type C-776. ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve. Flow Control

Cash Valve Type C-776 ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve Issued - April 2000 CAVMC-0515-US-1202 ISO 9001 Certified Flow Control Type C-776 - Cryogenic Safety

WP-SDC COPPER CAN REGISTER WOLTMAN WATER METER

WP-SDC COPPER CAN REGISTER WOLTMAN WATER METER WP-SDC Copper Can Register Woltman (Turbine) Belanto WP-SDC is TURBINE Woltman water meter with magnetic transmission, super dry type register for industrial

D1 Series Multi-hole Cage Guided Control Valves

D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal

Uni-Seals Product Catalog

Uni-Seals Product Catalog www.uni-seals.com 0 Index PTFE Sheet/Rod/Tube GS4000 Pure PTFE sheet.. 2 GS4010 PTFE molded sheet 2 GS4020 PTFE skived sheet.. 2 GS4100 Expanded PTFE sheet.. 3 RO4000 PTFE rod.

Worcester 5 Series. BS 5351 Approved Flanged Ball Valves

Worcester 5 Series S 5351 pproved Flanged all Valves Flowserve Worcester is proud to announce the introduction of its new 519/529 range of ball valves which replaces the DN 15 - sizes of the proven Series

POLYFLURON -E PTFE and POLYFLURON -P PTFE. The Right Column and Vessel Lining to Meet any Need. Process Technology. Broad Base. Best Solutions.

POLYFLURON -E PTFE and POLYFLURON -P PTFE The Right Column and Vessel Lining to Meet any Need Process Technology Broad Base. Best Solutions. SGL Group The Carbon Company SGL Group The Carbon Company is

High-Tech with History

High-Tech with History The story of Schmierer GmbH has a very long tradition. Anna + Eugen Schmierer founded the company in Frankfurt/Main in the year 1932; first starting with a repair shop for measuring

special male. Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions

82-200 special male Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions Solder end, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Designed for soft

Visual Level Indicators VLI

WEKA Visual Level Indicators VLI Certified according ISO 9001:2000 Certified according PED 97/23/EC Member of the Group Certified according ATEX 94/9/EC Principles of design Single-pole Magnet System The

C. ASSE 1013 Performance Requirements for Reduced Pressure Principle Backflow Preventers.

PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is

Let s move the medium! check valves / gate valves / strainers

Let s move the medium! check valves / gate valves / strainers BV 49 gate valve flange connections according PN10/16 and A-150 face to face dimension according DIN 3202 F4/F5, ANSI B16.10 easy to regulate

Dorot Irrigation Meter

DIM-A Irrigation Meter Application The DIM meter is designed for agriculture control applications. The turbine is located at the top of the pipe. Major section of the pipe is free for water flow. Features

A Comparison: ASME B31.1 Power Piping versus ASME B31.3 Process Piping

A Comparison: ASME B31.1 Power Piping versus ASME B31.3 Process Piping Don Frikken, PE BECHT ENGINEERING COMPANY, INC. 1 Topics Discussed B31 History Scopes Organization of the Codes Bases for Allowable

Model B. Thermostatic Control Valves. Typical applications

Thermostatic Control Valves Model B Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications

289 Series Spring-Loaded Relief Valves

February 1 89 Series Spring-Loaded Relief Valves W187_1 W1871 TYPE 89L 1 NPT TYPES 89H AND 89HH W187 NPT TYPE 89H W187_ TYPES 89U AND 89A Figure 1. Types 89H, 89L, and 89U Relief Valves Introduction The

8.27/210 * 7.28/ / / /108. n x d. b f ML00343b. Dimensions are in inches/millimeters *8.86/225 for Pg 13.5 with adapter 2.

SITRANS P DSIII Pressure Transmitters All versions of the SITRANS P transmitter, DS III series, are smart two-wire transmitters The output signal is a load-independent direct current of 4 to 20 ma proportional

Model B. Thermostatic Control Valves. Typical applications

Thermostatic Control Valves Model B Typical applications Lubricating oil temperature control Jacket water high temperature (HT) Secondary water low temperature (LT) Heat recovery Water saving applications

Gyrolok. Gyrolok Flareless Tube Fittings Tubing Data Charts

Gyrolok Flareless Tube Fittings Tubing Data Charts Design HOKE Gyrolok Flareless Tube Fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application

WEAR AND CORROSION RESISTANT BALL VALVES. System solutions with ceramic components

WEAR AND CORROSION RESISTANT BALL VALVES System solutions with ceramic components 2 Wear protection in the toughest operating conditions Conventional materials in valves can reach their limits in many

Diffused Aeration Piping Equipment

1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections

ISORIA 10. Centered disc butterfly valves with special AMRING elastomer liner. 150 psig Rated (10 Bar) 1 ½ to 60 inch (40 to 1500 mm)

Technical leaflet 8444.1/3-10 ISORIA 10 Centered disc butterfly valves with special AMRING elasmer liner 150 psig Rated (10 Bar) 1 ½ 60 inch (40 1500 mm) The ISORIA 10 series, developed by AMRI-KSB, is

Butterfly valve VZAV

Butterfly valve VZAV Content 1 General Information VZAV... 3 2 Order Information VZAV... 4 2.1 Modular System... 4 2.2 Part No. types... 4 3 Type code VZAV... 5 4 Technical Data... 7 4.1 General technical

The Filterautomat. Our Filter Systems Protect. The New Definition of Purity for Your Medium. flow rate 5 m 3 /h to 4,000 m 3 /h. filter fineness 5 µm

GB Filterautomat The New Definition of Purity for Your Medium Our Filter Systems Protect The Filterautomat Cooling Water River Water Plate Heat Exchangers Spray Nozzles Sea Water Sinter and Scale Separation

VALVE PRODUCT OVERVIEW

WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing

Standpipe Meters and Hydrant Flushing Unit STM-E, STM-N, STM-T, STW The mobile tapping points for taking water from hydrants

Standpipe Meters and Hydrant Flushing Unit STM-E, STM-N, STM-T, STW The mobile tapping points for taking water from hydrants Flow rate Q n 2.5... 25. Weatherproof: designed for the tough conditions outdoors.

ARI-STEVI 440 / 441 (DN15-250) Control valve - straight through With pneumatic and electric actuators

ARI-STEVI 4 / 441 (DN15-0) Control valve - straight through With pneumatic and electric actuators ARI-STEVI 4 / 441 Pneumatic actuator ARI-DP 32-34 Tri Reversible pneumatic actuator Actuator with rolling