Mission Statement. State Steel strives to provide quality products and services at competitive
|
|
- Lizbeth Wiggins
- 6 years ago
- Views:
Transcription
1 Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories and state-of-the-art equipment which make our products and services readily available throughout our sales area. We are sensitive to customer needs and determined to find ways to meet or exceed their requirements. Through hard work, good customer relations, and sound management we are committed to the future growth of State Steel, to our customers, and to our dedicated employees, the backbone of our success.
2 Sioux City, IA Fax: Grand Island, NE Fax: Sioux Falls, SD Fax: Des Moines, IA Fax: Spencer, IA Fax: Omaha, NE Fax:
3 State Steel Supply Company a full service supply center offering a wide range of services including: In-Line Temper Mill (Cold Reduction Process) Cut to Length Coil Processing Up to 1/2 thick (100,000 yield) x 96 Wide with Improved Surface and Superior Flatness Laser Cutting 3/4 thick - 80 x 216 production output Shearing Forming Flame and Plasma Cutting CNC Saw Cutting Die Stamping (Up to 200 ton Capacity) Just in Time Delivery We also offer a full-line inventory (carbon, galvanized, stainless, aluminum) including pipe, tubing, DOM, threaded rod, expanded metal, bar grating, and grip strut. ISO 9002 CERTIFIED
4 Index Aluminum Angle Beams Channel Color / Painted Channel Bar... 3 Galvanized... 4 Junior... 4 Structural Expanded Metal Flats Pipe Plates Rounds Sheets Square & Rectangle Tube Square Coil Cold Rolled Floor Plate Galvanized Galvannealed High Strength Hot Rolled Hot Rolled Pickled & Oiled Angles Treadbrite (Floor Plate) Structural Expanded Metal Flattened Standard Beams Galvanized... 7 I Beams... 1 Wide Flange Beams Flats Cold Drawn Galvanized Hot Rolled Beef Rail (Round Edge) Carbon Galvanized Floor Plates Aluminum Carbon Steel... 31
5 Index Grader Blades Grating Bar Cat Walk Grip Strut Hexagons Cold Rolled Stress Relieved Pipe Plates Abrasion Resisting Aluminum High Strength Hot Rolled Pickled & Oiled Stainless Annealed & Pickled PTO Tube/Shaft Rebar Redi Rod Carbon Steel Rod Oil Finish Electro Zinc Plated Stainless Rounds Stainless Cold Rolled Galvanized Hot Rolled Stainless Turned Ground and Polished Angle Annealed & Pickled Plates Annealed & Pickled Sheets Channel Expanded Metal Flats Pipe Plates Polished Sheets Rectangle Tubing Redi Rod Round Sheets Square Tubing Squares Strips... 67
6 Index Sheets Squares Cold Rolled Galvanized Galvannealed High Strength Hot Rolled Paint Grip Pickled & Oiled Stainless Cold Rolled Hot Rolled Stress Relieved Cold Rolled Rounds Strips Galvanized... 8 Hot Rolled... 8 T Iron... 7 Tube Pipe Size Power Take Off Rectangle Round Mechanical Electric Weld Round Mechanical Round Square Wire Mesh Rolls Sheets Hexagons Turned Ground & Polished Wire (Blk Annealed) AISI Carbon Steel Tolerance Ranges Carbon Pipe Schedules Decimal Conversion Table Fabrication Glossary of Terms
7 Beef Rail Grader Blades Beef Rail Grader Blades State Steel Beef Rail 1045 (Round Edge) Size Length WT / FT WT / Bar 1/2 x 2-1/ Galvanized Beef Rail 1045 Size Length WT / FT WT / Bar 1/2 x 2-1/ Grader Blades 1055 Size Length WT / FT WT / Bar 3/8 x RL /2 x RL /2 x RL /2 x RL /8 x RL Beef Rail 1045 Medium carbon which increases strength levels and heat treatability. Commonly used in packing houses for hanging beef. A device that includes a hook that attaches to a side of beef and a roller that rides on the beef rail allows packing houses to maneuver the beef easily throughout the plant. Estimated Minimum Mechanical Properties (EMMP): Yield 60,000 psi. Tensile 95,000 psi. 3/4 x RL /4 x RL /4 x RL /4 x RL x RL x RL Grader Blades AISI High carbon, single bevel flats that are commonly used in the farm equipment industry for blades on front end loaders, graders, etc. 12 SS
STAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
More informationEngel Diversified Industries Inc.
Engel Diversified Industries Inc. PO Box 85 1060 Quaker Avenue Jordan, MN 55352 Represented by: Duane Jaworski & Associates 763-792-2184 Toll Free 877-562-5070 Fax 763-785-9065 Toll Free 877-280-2087 EDi
More informationCOPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6
More informationJ.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25
TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140
More informationCARBON STEEL BARS HOT ROLLED
CARBON STEEL BARS HOT ROLLED Grade Description...3-2 Rounds...3-3 thru 3-4 Strip...3-5 Flats (A-36)...3-6 thru 3-8 (M1044)...3-9 Squares...3-9 Reinforcing Bars...3-10 Reinforcing Mesh...3-10 TOLERANCES...3-11
More informationMarcegaglia do Brasil
Garuva plant Marcegaglia do Brasil 7 millions wire on tube condensers 240 millions meters of welded tubes for refrigeration 180.000 tons of electro-welded carbon tubes Brasília 20.000 tons of stainless
More informationAlloys SUPER SQUARE
Alloys ETD 150...8-2 ETD 150 Rounds...8-2 AISI 4140/41L40 - Annealed...8-3 AISI 4140 - Annealed Flats And Squares... 8-4 thru 8-5 AISI 4140 - Annealed Rounds... 8-5 thru 8-6 AISI 4140 Rounds HR Q&T...8-7
More informationLifting Sockets. Flat Lifting Sockets
Lifting sockets are widely used in the application of precast concrete construction, such as lifting beams, wall and floor slabs etc.. A reinforcement bar is to be inserted through the cross hole to transfer
More informationIt is our intent to always maintain the highest level of quality metals obtainable from our mill sources.
This stock catalog contains the sizes, weights and descriptions of all standard Steel, Brass, Bronze and Dura-Bar Cast Iron items that are available from stock for immediate delivery. However, new items
More informationThyssenKrupp Materials Austria GmbH
GmbH Group Organisation Business Area Materials Services 2 Company History TKMA 3 Head Office Vienna - Freudenau Harbour Warehouse area 8.000 m² Office space 1.200 m² 69 employees 17 Band saws 1 Plasma
More informationThe following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs.
The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs. I. Seamless Copper and Brass Tubing - as per ASTM and military standards,
More informationSolutions in Steel Innovative Technologies for Smart Solutions
Solutions in Steel Innovative Technologies for Smart Solutions Company Montanstahl is a dynamic family-owned company active in the production and supply of high quality special steel shapes. Established
More informationYOUR SOURCE FOR ALL YOUR PIPE AND TUBING NEEDS
SINCE 1953 YOUR SOURCE FOR ALL YOUR PIPE AND TUBING NEEDS Eight regional warehouses Over 70,000 tons in inventory ready for immediate delivery Nationwide trucking system Knowledgeable sales staff State-of-the-art
More informationAMERICAN NATIONAL STANDARD ANSI/NAAMM STANDARD. Maximum Bearing Bar Depth / 2 (63.5 mm)
METAL BAR GRATING AMERICAN NATIONAL STANDARD ANSI/NAAMM STANDARD MBG 531-17 GRATINGS 5 ANSI/NAAMM MBG 531-17 SEPTEMBER 7, 2017 METAL BAR GRATING MANUAL EIGHTH EDITION Maximum Bearing Bar Depth... 2 1 /
More informationSection 906. STRUCTURAL STEEL
906.01 Section 906. STRUCTURAL STEEL 906.01. General Requirements. Finished rolled shapes must be free from imperfections that affect strength and durability in accordance with ASTM A 6. Rolled shapes
More informationSTAINLESS STEEL STAINLESS HALF-ROUNDS STAINLESS SQUARES 303, 304/304L, 316L, 416, 17-4,
STAINLESS STEEL TECHNICAL DATA and APPLICATIONS Grade 201...9-2 Grade 303 and 303 G&P...9-3 Grade 304 and 304L...9-4 Grade 316L and 316L BSQ...9-5 Grade 410...9-6 Grade 416 and 416 PSQ...9-7 Grade 420...9-8
More informationthyssenkrupp Materials NA Company Portrait March 2016 thyssenkrupp Materials Services / Materials NA
thyssenkrupp Materials NA Company Portrait March 2016 At home around the world Close to customers through more than 2,200 production sites, offices and service locations all over the world. Global market
More informationSHEET AND COIL. 5MPage 1. 5 Sheet and Coil
SHEET AND COIL ALUMINIZED COIL AND SHEET 5-22 COLD ROLLED COIL AND SHEET General 5-11 Tolerances 5-12 to 5-14 GALVANIZED COIL AND SHEET General 5-15 Chemical Composition 5-16 Weight of Coating 5-17 Tolerances
More informationHot Rolled. AK Steel produces Hot Rolled Steels to meet the strictest chemistry and dimensional requirements, in a wide variety of grades.
Hot Rolled STEELs P r o d u c t D ata B u l l e t i n AK Steel produces Hot Rolled Steels to meet the strictest chemistry and dimensional requirements, in a wide variety of grades. Consistency from coil
More informationSECTION HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS
SECTION 26 05 29 HANGERS AND SUPPORTS FOR ELECTRICAL SYSTEMS PART 1 GENERAL 1.1 DESCRIPTION A. Scope: 1. CONTRACTOR shall provide all labor, materials, equipment, and incidentals as shown, specified, and
More informationME 4563 ME 4563 ME Introduction to Manufacturing Processes. College of Engineering Arkansas State University.
Introduction to Manufacturing Processes College of Engineering Arkansas State University 1 Bulk Deformation 2 1 Rolling 3 What is Rolling? A process of reducing the thickness (or changing the cross-section
More informationCompany. Hot rolling Cold rolling Cold drawing Laser fusion Davex. For further information, please visit us at
Company Montanstahl is a dynamic family-owned company active in the production and supply of high quality special steel shapes. Established in 1983 in Switzerland, Montanstahl has achieved a high level
More informationPipe Pile. New Jersey Department of Transportation, Brielle, NJ. Route 70 Bridge over the Manasquan River, Brielle, NJ. USACE, Santa Maria, CA
Pipe Pile Similar to H-piles, pipe piles are also designed to transfer structural loads through the foundation to soils below. Where H-piles are typically classified as point bearing, pipe piles are most
More informationBob Dean Supply, Inc.
Steel & Machine Shop Handbook Main Branch 2624 Hanson Street Fort Myers, FL 33901 (800) 282-8378 (239) 332-1131 (239) 332-7746 Fax Clewiston Branch 1310 Evercane Road Clewiston, FL 33440 (800) 282-5186
More informationmarcegaglia RU Vladimir
marcegaglia RU Vladimir Marcegaglia RU 70 000 sqm total area 14 000 sqm first phase covered area Vladimir St. Petersburg Moscow 42 000 sqm for development (covered) 25 000 t/y tube manufacturing capacity
More informationARCAP AP1D AP1D lb/in³ 8.8 g/cm³ 240 Ohm circ mil/ft 40 microohm cm 212 F 572 F 932 F 1112 F 1832 F 100 C 300 C 500 C 600 C 1000 C
Identification VMI No. UNS No. Relevant Specifications Forms Description ARCAP C76350 n/a Strip Wire Bar Sheet Free Cutting bar and wire. Chemical Composition (%) Copper (+Silver) 61 Nominal Nickel (+Cobalt)
More informationAluminum Mill Products
Aluminum Mill Products Aluminum Angle, Channel, Pipe Fittings, Pipe, Rod, Bar, Sheet, Plate, Coil & Tubing ALASKAN COPPER & BRASS COMPANY History W hen Alaskan Copper Works was founded as a marine coppersmithing
More informationPlymouth Feedwater Heater Tubing F O R T H E P O W E R G E N E R AT I O N I N D U S T R Y
Plymouth Feedwater Heater Tubing F O R T H E P O W E R G E N E R AT I O N I N D U S T R Y P L Y M O U T H F E E D W A T E R H E A T E R T U B I N G THE CHOICE OF UTILITY ENGINEERS AND FABRICATORS Products
More informationRoughneck Mesh Slings
Roughneck Slings Roughneck Slings Roughneck WIRE MESH SLINGS Specialty Slings with Particular Properties and Uses Widely used in metalworking shops and steel warehouses where loads are abrasive, hot or
More informationHH W1030 HF BUILD-UP FOR CARBON STEEL
HH W1030 HF BUILD-UP FOR CARBON STEEL HH W1030 HF is a high hardness build-up wire with excellent compressive strength. It is recommended for any application for any application where the weld deposits
More informationD D TYPE A1, A2 & B MICHIGAN DEPARTMENT OF TRANSPORTATION 5-40 CONNECTION. L4" x 4" x 3/8" Brace. C8 x 4.25 Strut. WT9 x 17.5.
Sign length minus Adjust to avoid interference with sign legend A Deck fascia A 6" Equal Equal 6" Sign length (L) varies 6 to 12 PLAN 0 CONNECTION (DECK FASCIA) Angle connection assembly F Face of concrete
More informationWestgate Entrematic, Parking Security Gates Section OVERHEAD SECURITY GATE Prepared by: Digicon Information Inc. Page 1
Prepared by: Digicon Information Inc. Page 1 This section includes overhead type Parking Security Gates, as manufactured by Westgate Entrematic, a division of Helton Group of Companies. DISCLAIMER: This
More informationBulk Deformation Forming - Rolling
1 Bulk Deformation Forming - Rolling Overview - Shaping and Forming Powders Pressing SLS Special Injection Molding Firing/ Sintering 2 Raw Material Molten Material Continuous Casting/Rolling Ingot casting
More informationPRODUCT CATALOG. TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. amerpipe.com
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 825 Maryville
More informationWilliams Metals. Providing Welding & Metals Solutions for Over 50 Years. Non-Ferrous Metals. Setting the Standard for Excellence.
Williams Metals and Welding Alloys, Inc. Providing Welding & Metals Solutions for Over 0 Years Non-Ferrous Metals Setting the Standard for Excellence. Williams Metals and Welding Alloys is a multi-location
More informationSECTION METAL BUILDING SYSTEMS
SECTION 13 3419 PART 1 GENERAL 1.01 SECTION INCLUDES A. Manufacturer-engineered, shop-fabricated structural steel building frame. B. Insulated Metal wall and roof panels including gutters and downspouts.
More informationNON-FERROUS METAL DISTRIBUTION CAST-PLATE PRODUCTION CNC-PROCESSING. AMCO at a glance. My supplier has to deliver on his promise. I count on AMCO.
NON-FERROUS METAL DISTRIBUTION CAST-PLATE PRODUCTION CNC-PROCESSING AMCO at a glance My supplier has to deliver on his promise. When metal and service shine. Quality starts by giving the customer s thinking
More informationManufacturing & Distributing Customer Solutions
Manufacturing & Distributing Customer Solutions Wireless Site Accessories Grounding Materials Electrical Components Lightning Protection Custom Fabrication Hardware Tools Safety Equipment Contractor Supplies
More informationDevelopment of ATI 425 Alloy Flat Rolled Products ITA 2010
Development of ATI 425 Alloy Flat Rolled Products ITA 2010 Orlando FL October 5, 2010 2010 ATI Luis Ruiz-Aparicio, PhD Outline ATI 425 Alloy Introduction Cold-Rolled & Annealed Coil Processing Mechanical
More informationTRANSPORT II " 10.5" MOUNTING POSTS FENCE LINE POST. Classic gate shown GATE OPENING CANTILEVER GATE SAFETY WARNING
TRANSPORT ESTATE TRANSPORT IS TRANSPORT LINK ADAPTRACK 2"sq x.25" UPRIGHTS & DIAGONAL BRACES 1"sq x.125" PICKETS GATE TRACKS PRE-DRILLED FOR LEFT OR RIGHT OPENINGS FENCE LINE POST 13.8125" 10.5" MOUNTING
More informationSECTION 1043 FENCE MATERIAL
SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance
More informationDBI-SALA Uni 8 Overhead Horizontal Lifeline Cable System SECTION HORIZONTAL FALL PROTECTION - OVERHEAD CABLE
SECTION 112429.18 - HORIZONTAL FALL PROTECTION - OVERHEAD CABLE PART 1 - GENERAL 1.1 SECTION INCLUDES A. Provide overhead horizontal cable fall protection system, including end anchors, energy absorbers,
More information10 years of innovation and technology: new capacities in flat production. Enrico Paladini, Marcegaglia coil division
10 years of innovation and technology: new capacities in flat production Enrico Paladini, Marcegaglia coil division Good afternoon. My name is Enrico Paladini, sales director of Marcegaglia coil division
More informationIMPACT. Chemical composition For the chemical composition of the ladle analysis the following limits are applicable (in %):
IMPACT Wear resistant steel Material data sheet, edition April 2016 1 DILLIDUR IMPACT is a wear resistant steel with a nominal hardness of 340 HBW in delivery condition. DILLIDUR IMPACT is not a constructional
More informationCUSTOMS TARIFF - SCHEDULE XV - 1
XV - 1 Section XV BASE METALS AND ARTICLES OF BASE METAL Notes. 1. This Section does not cover: (a) Prepared paints, inks or other products with a basis of metallic flakes or powder (headings 32.07 to
More informationFSection F. Sheets and Plates. Plates. Plates and Sheets. Plates. Plates. Sheets and Plates
FSection F HIGH STRENGTH LOW ALLOY STEELS HEAT TREATED CONSTRUCTIONAL ALLOY STEELS ABRASION RESISTING STEELS HIGH STRENGTH LOW ALLOY STEELS... 2-3 Sheets and Plates HEAT TREATED CONSTRUCTIONAL ALLOY STEELS...
More informationSECTION HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED BI-FOLD GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationHOT DIP GALVANIZED STEEL. Agricultural Equipment. Transportation
HOT DIP GALVANIZED STEEL P R O D U C T D ATA B U L L E T I N Auto Body Panels HVAC Appliances Agricultural Equipment Transportation AK Steel s Hot Dip Galvanized Steel, known as ZINCGRIP Steel, is continuously
More informationMetal Forming Process. Prof.A.Chandrashekhar
Metal Forming Process Prof.A.Chandrashekhar Introduction Shaping of a component by the application of external forces is known as the metal forming. Metal forming can be described as a process in which
More informationSTULZ-SICKLES STEEL COMPANY
STULZ-SICKLES STEEL COMPANY SINCE 1916 Providing Years of Wear Resistant Service to the Railroad Industry Railroad ELIZABETH, NEW JERSEY COLTON, CALIFORNIA 800-351-1776 800-572-5809 www.stulzsicklessteel.com
More informationKÖNIG + CO. FORMING KNOW-HOW
FORMING KNOW-HOW FORMING KNOW-HOW 2 3 FORMING KNOW-HOW 4 Bödenpresswerke. Committed to tradition. Focus on the future. KÖNIG + CO. GmbH is an owner-managed family company with a history of more than eighty
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationFor more information call (800) Materials Services Copper and Brass Sales. Stainless Steel
For more information call (800) 926-2600 1 Materials Services Copper and Brass Sales Stainless Steel Service You Can Count On. At thyssenkrupp Materials NA, Copper and Brass Sales, we're committed to being
More informationVDM Alloy 718 CTP Nicrofer 5219 Nb
VDM Alloy 718 CTP Nicrofer 5219 Nb Material Data Sheet No. 4127 September 2017 September 2017 VDM Alloy 718 CTP 2 VDM Alloy 718 CTP Nicrofer 5219 Nb VDM Alloy 718 CTP is an age-hardenable nickel-chromium-iron-molybdenum
More informationDRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS1910-2 First Edition 2017-10-20 Metal Chairs for 0ffice Purposes Part. 2: Revolving and Tilting- Specification Reference number DUS 1910-2:2017 UNBS 2017 DUS 1910-2:2017 Compliance
More informationVDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
More informationAlro Steel. Tool & Die Steel. Handbook. A Helpful Guide to the Properties, Selection, & Heat Treatment of Tool Steels.
Alro Steel Metals Industrial Supplies Plastics Tool & Die Steel Handbook A Helpful Guide to the Properties, Selection, & Heat Treatment of Tool Steels. MISSION STATEMENT To ensure the long-term success
More informationCommitted to total customer satisfaction.
Committed to total customer satisfaction. Dear Friends, Welcome to our new and greatly improved buyers guide and reference book. We ve expended a great deal of time and energy to make this more than just
More informationHOT DIP GALVANNEALED STEEL
HOT DIP GALVANNEALED STEEL Construction Auto Body Panels Electrical Enclosures HOT DIP GALVANNEALED STEEL, known as ZINCGRIP GA Steel, is continuously coated on both sides with a zinc-iron (Zn-Fe) alloy.
More informationMarcegaglia USA Munhall
Marcegaglia USA Munhall 1 Marcegaglia USA The Marcegaglia USA production facility is located in Munhall, PA (just outside Pittsburgh). It is devoted to the manufacturing of stainless steel, duplex and
More informationB. Polyethylene samples shall be submitted for Owner approval of color and quality.
Glass Rail ENGINEERED DASHERBOARD SPECIFICATIONS PART 1 - GENERAL 1.01 PROJECT SCOPE A. Contractor shall furnish and install one complete set of steel framed dasherboards as indicated on the drawings and
More informationAB N: Tel: Fax: Web:
AB N: 53 098 785 27 6 Tel: 03 9792 9500 Fax: 03 97 92 9400 Web: www.skysong.com.au Ad d: 13 D a rby w ay, D an den ong South, Vic 317 5 Contents Introduction... 3 Range of products... 4 Aluminium Sheet...
More informationHOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES SPECIFICATION (Third Revision of IS 5986)
For Comments Only Draft Indian Standard Doc: MTD 4(4939) HOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES SPECIFICATION (Third Revision of IS 5986) ICS 77.140.50 Not to be reproduced
More informationB. Shop Drawings: For metal lockers. Include plans, elevations, sections, details, and attachments to other work.
SECTION 10 5113 - METAL LOCKERS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
More informationChapter 15 Extrusion and Drawing of Metals
Introduction Chapter 15 Extrusion and Drawing of Metals Alexandra Schönning, Ph.D. Mechanical Engineering University of North Florida Figures by Manufacturing Engineering and Technology Kalpakijan and
More informationInnovative heat treatment technologies. Field proven reliability and cutting-edge technology for every application
Innovative heat treatment technologies Field proven reliability and cutting-edge technology for every application Leading-edge heat treatment furnaces meeting international safety and quality standards
More informationSTEEL SECTOR OVERVIEW
STEEL SECTOR OVERVIEW February 2017 STEEL SPECIFIC TERMS & PRODUCTS Crude Steel is steel in its first solid (or usable) form: ingots, semi-finished products billets, blooms, slabs. Production refers to
More informationWho We Are. Located near Port, Rail and Road transportation links, Maritime Welding Inc. can deliver world-class steel fabrication services worldwide.
Who We Are Maritime Welding Inc., established in 1969, is a fully equipped metal fabricating shop staffed by a well trained flexible and knowledgeable workforce. Our shop located in Northern New Brunswick
More informationA. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS
SECTION 08 32 20 CRL50 AND CRL51 HEAVY GLASS TOP HUNG SLIDING DOOR SYSTEMS Page 1 of 6 USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationSTAINLESS STEEL BRIGHT BARS
STAINLESS STEEL BRIGHT BARS Stainless Steel Bright Bars Stainless Steel Bright Bars Viraj is equipped with a state-of-the-art, continuous hardening and tempering furnace for the heat treatment of Ferritic
More informationWestfälische Drahtindustrie GmbH BRIGHT STEEL. Product range
Westfälische Drahtindustrie GmbH BRIGHT STEEL Product range 1 Westfälische Drahtindustrie GmbH The company Westfälische Drahtindustrie GmbH can trace its origins to a factory for wire production that was
More informationSECTION SECTIONAL OVERHEAD DOORS
SECTION 08360 SECTIONAL OVERHEAD DOORS PART 1 GENERAL 1.1 SECTION INCLUDES A. Aluminum Doors B. Track and Framing 1.2 RELATED SECTIONS A. Section 04810 - Unit Masonry Assemblies: Prepared opening in masonry.
More informationSTEEL PRICE FORECASTS TO North America. December MEPS (International) ltd 263 Glossop Road Sheffield S10 2GZ
www.meps.co.uk STEEL PRICE FORECASTS TO 2022 North America December 2017 MEPS (International) ltd 263 Glossop Road Sheffield S10 2GZ t: 0114 275 0570 f: 0114 275 9808 e: subs@meps.co.uk Steel Price s To
More informationSECTION VIBRATION CONTROLS FOR HVAC PIPING AND EQUIPMENT
SECTION 230548 - PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Elastomeric Isolation pads. 2. Elastomeric Isolation mounts. 3. [Freestanding] [Restrained] [Freestanding and restrained]
More informationPrecision Machining since 1967
Precision Machining since 1967 Put Our Experience to Work for You At RPM, our focus is precision grinding, machining and finishing of close tolerance tooling. Our combination of skilled craftsmen and
More informationHot Dipped Galvanized + Cold Rolled Steel. TONSof QUALITY
Hot Dipped Galvanized + Cold Rolled Steel TONSof QUALITY o The CSN Advantage CSN, LLC, a wholly owned subsidiary of Companhia Siderúrgica Nacional, is a conversion mill specializing in light gauge galvanized
More informationCOLD ROLLED STEEL S. Automotive. Appliances. Construction. Lighting. Office Furniture
COLD ROLLED STEEL S Automotive Appliances Construction Lighting Office Furniture COLD ROLLED STEELS provide excellent thickness and flatness tolerances, surface finish, and press formability. AK Steel
More informationMaterials Carbon Steel and Malleable Iron are used in the manufacture of concrete inserts. Stainless Steel and other materials are available.
Concrete inserts offered in this section are designed to provide a pre-set support point in concrete ceilings, walls, and floors. A range of inserts with varying design loads are available. Materials Carbon
More informationTate Access Floors, Inc. ConCore 1250 Access Floor Panel Bolted Stringer Understructure System
Notice: Tate Access Floors, Inc. ConCore 1250 Access Floor Panel Bolted Stringer Understructure System If you are using MasterFormat 2004 Edition, the proper section number to use is Section 09 69 00,
More informationTechnical specifications Prefab Steel Canopy
Canopy Structure: Technical specifications Prefab Steel Canopy Design fabrication and installation of pre-engineered / pre- fabricated steel canopy as per the following specification: The canopy steel
More informationHOW PIPE IS MANUFACTURED: CONTINUOUS WELD PIPE: PDF compression, OCR, web optimization using a watermarked evaluation copy of CVISION PDFCompressor
HOW PIPE IS MANUFACTURED: Production of steel pipe is grouped into two general categories: WELDED and SEAMLESS. There are many methods of producing steel pipe in current use. However. most of the pipe
More informationWIRE PROCESSING PLATING LOCKING & SEALING HEAT TREAT DISTRIBUTION
WIRE PROCESSING PLATING LOCKING & SEALING HEAT TREAT DISTRIBUTION THE AJAX ADVANTAGE Your One Stop Source for Dependable On-Time Performance Boasting well over 250,000 total square feet throughout key
More informationFig Beam Clamp Retaining Strap (B-Line B3367)
Fig. 69 - Beam Clamp Retaining Strap (B-Line B3367) Size Range: 3 /8"-16 thru 3 /4"-10 rod 4 (101.6mm) thru 16 (406.4mm) lengths Note: longer lengths are available consult factory Material: Pre-Galvanized
More informationATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)
ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper
More informationCURTAINWALL DEFLECTION SOLUTIONS
l l l l l CURTAINWALL DEFLECTION SOLUTIONS Provides lateral support for curtain wall systems. One of the highest tested load capacities available. Direct attachment to web and support. Most clips are reversible.
More informationC27200 CuZn37 Industrial Rolled
C272 Alloy Designation EN DIN CEN/TS 13388 (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order
More informationSTOCKIST SUPPLIERS & EXPORTERS:
PIPES & TUBES: Stainless Steel: ASTM A 312, A 213, A 213, A 249, A 269, A 358, A 240, A 276 Type: 202, 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S, 409, 410, 420, 430 etc. Carbon
More informationObjectives. This chapter provides fundamental background on processes of drawing of rods, wires and tubes.
WIRE DRAWING Objectives This chapter provides fundamental background on processes of drawing of rods, wires and tubes. Mathematical approaches for the calculation of drawing load will be introduced. Finally
More information1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061 etc.
Product Name Picture Alloy Temper Thickness Width 5 bars Tread Plate /Aluminu m Checker Plate 1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061 etc. H12, H14, H16, H18, H22, H24, H26, H32, H34, H36, H38,
More informationSPCIFICATION FOR STANDARD SIZS N 15 : 2 + A1 : 27 FOR BLACK AND HOT DIPPD GALVANIZD STL PIPS Tube T Y P - L T Y P - L1 T Y Size OD (Specified) Wall Thickness (mm) Weight of Tube (Kg./Mtr) Pressure Inch
More informationcarbon steel welded precision tubes 80,000 sqm
Kluczbork plant Marcegaglia Poland The Marcegaglia manufacturing facility in Kluczbork, Poland was inaugurated in 2010 and is dedicated to the production of carbon steel welded precision tubes for a wide
More informationAluminum Stock Guide.
For more information call (800) 926-2600 1 Materials Services Copper and Brass Sales Aluminum Stock Guide. 1 New! in this edition of the Aluminum Stock Guide, CBS Part Numbers make ordering easier than
More informationSECTION ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING
7160 Krick Rd., Walton Hills, OH 44146 800-321-3827 - Tel 440-439-8650 - Fax 440-439-6889 SECTION 12 48 16 ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING PART 1. GENERAL 1.01 SUMMARY: This section includes
More informationPASSAIC COUNTY TECHNICAL INSTITUTE CCA 1422 NEW S.T.E.M. BUILDING 2017
SECTION 10505 - METAL STUDENT LOCKERS PART 1 - GENERAL 1.01 SCOPE OF WORK A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
More informationMetal Products. Flat Products
Metal Products Saudi Iron and Steel Company (Hadeed) is wholly owned by the Saudi Basic Industries Corporation (SABIC). It is the first integrated iron and steel complex in the Kingdom of Saudi Arabia.
More informationThe ATI 17-4 precipitation hardening stainless steel (S17400) is covered by the following wrought product specifications.
ATI 17-4 Precipitation Hardening Stainless Steel (UNS S17400) INTRODUCTION ATI 17-4 precipitation hardening stainless steel (S17400), Type 630, is a chromium-nickel-copper precipitation hardening stainless
More informationMold Design. 12. Mold Materials. Bong-Kee Lee School of Mechanical Engineering Chonnam National University
12. Mold Materials Bong-Kee Lee Chonnam National University Mold Materials easy toolmaking good performance during production good machining properties ease of hear treatment where hardening is required
More information9ZN1204NB Clamp Guide. Descriptions. Manufacturer Information. Packaging Carton 1 Weight Per each 0. Weight per unit Product Category
9ZN1204NB Clamp Guide Cooper B-Line/Cable Tray Catalog Number 9ZN1204NB Manufacturer Cooper B-Line/Cable Tray Description ZNC CBL Tray CLMP Weight per unit N/A Product Category 20120123130154 Descriptions
More informationvoestalpine Additive Manufacturing Center Singapore Pte Ltd
voestalpine Additive Manufacturing Center Singapore Direct Metal Deposition, DMD. 30 th November 2017 www.voestalpine.com voestalpine Additive Manufacturing Center. Singapore Direct Metal Deposition» Company
More information