BSA3HP Bellows Sealed High Pressure Stop Valve
|
|
|
- Kevin Newman
- 6 years ago
- Views:
Transcription
1 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. Copyright 217 TI-P CMGT Issue 2 BSA3HP Bellows Sealed High Pressure Stop Valve Description The BSA3HP is a carbon steel bodied, high pressure in-line nonthrottling stop valve with multi-ply bellows. Balanced and unbalanced options are available. These valves are rated to EN 192 PN1 or ASME class 6 for use with both saturated and superheated steam applications and a range of other industrial gases and fluids. Range and options Size Unbalanced Balanced PN1 Class 6 PN1 Class 6 DN15 - DN5 DN65 - DN1 Standards The product fully complies with the requirements of the European Pressure Equipment Directive and carries the mark when so required. Certification The BSA3HP is available with certification to EN Note: All certification / inspection requirements must be stated at the time of order placement. Size and pipe connection DN15, DN2, DN25, DN32, DN4, DN5, DN65, DN8 and DN1. Flanged EN 192 PN1 and ½", ¾", 1", 1¼", 1½", 2", 2½", 3" and 4". Flanged ASME class 6 DN1 ASME Class 6 BSA3HP shown Page 1 of 6
2 DN25 PN1 BSA3HP shown Items Materials No. Part Material Body Carbon steel N / SA-216 WCB 2 Seat Stainless steel Support cage Stainless steel / A351CF8M 4 Bellows housing Carbon steel N / SA-216 WCB 5 Bonnet Carbon steel N / SA-216 WCB 6 Plug Stainless steel Stem and bellows assembly Stainless steel / / / ASTM A L 8 Stem guide Stainless steel alloy UNS S218 9 Graphite ring Graphite 1 Gland ring Stainless steel / ASTM Gland nut Steel / M7 12 Bonnet bush Steel / M7 13 Thrust washer Steel 1.11 / C67S Page 2 of 6
3 DN25 PN1 BSA3HP shown Items Optional Balancing Plug Assembly Used above 12 bar g Differential Pressure DN65-DN8 4 bar g Differential Pressure DN1 21 No. Part Material 14 Hand wheel Steel / P245NB 15 Circlip Carbon steel 1.11 / C67S 16 Core plug Mild steel 1.33/CR4 17 Stem coupling Stainless steel ASTM A351 CF8 18 Socket head screw Stainless steel ASTM 34/A Studs Alloy steel ASTM A193 B7 2 Nuts Alloy steel ASTM A194 2H Gaskets Graphite and stainless steel / 316L 24 Stem plug Stainless steel / ASTM A Nut retainer Stainless steel / ASTM A Balanced plug Stainless steel Page 3 of 6
4 Pressure / temperature limits (ISO 6552) 4 A B Temperature C Steam saturation curve -1 C Pressure bar g The product must not be used in this region or beyond the parameter of the PMA or TMA of the relative end connection. A - B - C PN1 Body design condition PN1 PMA Maximum allowable pressure 1 bar 5 C TMA Maximum allowable temperature bar g Minimum allowable temperature -1 C PMO Maximum operating pressure for saturated steam service 7.5 bar C TMO Maximum operating temperature bar g Minimum operating temperature -1 C Designed for a maximum cold hydraulic test pressure of: 15 bar g A - D - E Class 6 Temperature C Pressure psi g A D Steam saturation curve Pressure bar g Body design condition Class 6 E Temperature F The product must not be used in this region or beyond the parameter of the PMA or TMA of the relative end connection. PMA Maximum allowable pressure 12.1 bar 38 C 1 481psi 1 F TMA Maximum allowable temperature bar g psi g Minimum allowable temperature -29 C -2 F PMO Maximum operating pressure for saturated steam service 79.8 bar C psi F TMO Maximum operating temperature bar g psi g Minimum operating temperature -29 C -2 F Designed for a maximum cold hydraulic test pressure of: 154 bar g 2 3 psi g Seat leakage Plug to seat shut-off conforms to EN Rate A leakage. Kv values Size DN15 (½") DN2 (¾") DN25 (1") DN32 (1¼") DN4 (1½") DN5 (2") DN65 (2½") DN8 (3") DN1 (4") Kv For conversion: Cv (UK) = Kv x.963 Cv (US) = Kv x Page 4 of 6
5 Dimensions/weights (approximate) in mm and kg A B C Ø Weight Size PN1 Class 6 PN1 Class 6 Unbalanced Balanced Unbalanced Balanced DN DN DN DN DN DN DN DN DN C B DN25 PN1 BSA3HP shown A Safety information, installation and maintenance For full details see the Installation and Maintenance Instructions (IM-P184-17) supplied with the product. Disposal: These products are recyclable. No ecological hazard is anticipated with the disposal of these products, providing due care is taken How to order Example: : 1 off DN25 Spirax Sarco type BSA3HP bellows sealed high pressure stop valve, flanged ASME 6. Note: Should the differential pressure exceed those listed against the respective sizes in the table below, then please ensure balancing discs are specified for use in the valves (see illustration on page 6). Size DN65 DN8 DN1 Differential pressure (bar g) Page 5 of 6
6 Spare parts The spare parts available are detailed below. No other parts are supplied as spares. 15 Available spares Seat/body/bonnet gaskets and graphite ring 9, 21, 22 and (2 off) 14 Seat, plug, stem and bellows assembly (Gaskets not included) 2, 6 and 7 Hand wheel and circlip 14 and 15 How to order spares Always order spares by using the description given in 'Available spares' and state the size and type of stop valve (balanced or unbalanced). 9 Example: 1 - Seat, plug, stem and bellows assembly for an unbalanced DN15 Spirax Sarco BSA3HP bellows sealed high pressure stop valve having EN192 PN1 connections. 6 and 7 22 DN25 PN1 BSA3HP shown 2 21 Page 6 of 6
Baumann 24000F Wafer Body Control Valve
24000F Valve Product Bulletin Baumann 24000F Wafer Body Control Valve The Baumann unique 24000F wafer style control valve mates with ASME and EN line flange connections and is designed to control a wide
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X
NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are
Worcester Controls E51/52. Enviro-Safe High Integrity Flanged Ball Valves
Worcester Controls E1/2 Enviro-Safe High Integrity Flanged Ball Valves General Description With environmental protection and control established as a major issue for the future, Flowserve Worcester Controls
Cryogenic Metal Seated Butterfly Valves
Cryogenic Metal Seated Butterfly Valves The Key to Cryogenic Valve Solutions VELAN S.A.S VELAN Inc Group VELAN inc is one of the world's leading independent manufacturer of steel gate, globe, check, butterfly
ARI-STEVI 440 / 441 (DN15-250) Control valve - straight through With pneumatic and electric actuators
ARI-STEVI 4 / 441 (DN15-0) Control valve - straight through With pneumatic and electric actuators ARI-STEVI 4 / 441 Pneumatic actuator ARI-DP 32-34 Tri Reversible pneumatic actuator Actuator with rolling
KTM METALTITE BALL VALVES FLOATING AND TRUNNION TYPE
Metaltite metal seated ball valves have excellent sealing characteristics suitable for various fluids services with a wide range of operating temperatures FEATURES GENERAL APPLICATION Clean fluids, dirty
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to 600 Flanges R.F. PN10/16-10 C + 120 C Max Pressure : 16 Bars up to DN300 ( 10 bars over ) Specifications : Ductile iron disc All positions Low
Regulating valves REG 6-65, REG-SS 15-40
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves
DCV Wafer check valves
V Wafer check valves V wafer check valves to prevent reverse flow... The Spirax Sarco range of V wafer check valves provides an effective minimal maintenance free solution for the prevention of reverse
D1 Series Multi-hole Cage Guided Control Valves
D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal
Cast Steel Bolted Bonnet Stop Check Valves Sizes: 2 thru 14 Pressure Class: 150 thru 1500
ast Steel olted onnet Stop heck Valves Sizes: 2 thru 14 Pressure lass: 150 thru 1500 Manufactured by Newmans 45 Newco ast arbon Steel olted onnet Valves Typical Newco ast Steel olted onnet Stop heck Valve
87A-200 Series. Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87A-200 Series Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - MATERIALS OF CONSTRUCTION Description (1/2 & 3/4 Valves) Material 2. Retainer ASTM A276 Type 316 3. Ball ASTM A276 Type 316
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve through 2
88A-100 SERIES Carbon Steel ASME Class 150 Flanged Std. Port Ball Valve - 1.5 through 2 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART MATERIAL 1 Body ASTM
87A-100 Series. Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve -
87A-100 Series Stainless Steel ASME Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 MATERIALS OF CONSTRUCTION Description Material 1. Body ASTM A351 CF8M 2. Retainer ASTM A276 Type 316 3. Ball
CROSBY H-SERIES DIRECT SPRING SAFETY VALVES
DIRECT SPRING SAFETY VALVES Direct spring safety valves that provide comprehensive overpressure protection for ASME Boiler and Pressure Vessel Code Section I, and Section VIII steam safety applications
Fisher EZ Sliding-Stem Control Valve
EZ Valve Product Bulletin 51.1:EZ Fisher EZ Sliding-Stem Control Valve Fisher EZ valves (figure 1) are used for throttling or on-off control of a wide variety of liquids and gases. The single-port, globe-style
Section 20. Globe Valves
Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are
Worcester 5 Series. BS 5351 Approved Flanged Ball Valves
Worcester 5 Series S 5351 pproved Flanged all Valves Flowserve Worcester is proud to announce the introduction of its new 519/529 range of ball valves which replaces the DN 15 - sizes of the proven Series
Richter Bellows-sealed Globe Control Valves
Richter Bellows-sealed Globe Control Valves RSS NEW: Size DN 50/6 Corrosion-resistant PFA lining ISO/DIN and ANSI/ISA face-to-face Heavy-duty bellows Special designs for chlorine and high-purity media
CONA -Universal ANSI / CONA -Connector ANSI
CONA -Universal ANSI for quick assembly/disassembly on CONA -Connector or foreign system connectors CONA -Universal ANSI / CONA -Connector ANSI CONA B-Universal ANSI Bimetallic steam trap ANSI CONA M-Universal
PRESSURE REGULATORS. GAS LOW PRESSURE PRESSURE REDUCING STEEL.5 oz - 20 psig OPER. PRES.
1527 (2.5 lbs. Std.) Spring 3061 (5 lbs. Opt.) 4379 (20 lbs. Opt.) Stem 2913 * Gasket 1216 Diaphragm Plate 1208 * Diaphragm 1212 Screw 236, 10 Req d. Nipple 648 Gauge 4080 Tee 219 * Diaphragm 110 * Seat
KLINGER Ballostar KHE: This ball valve offers more
KLINGER Ballostar KHE Split body ball valve DN (1/2 ) 0 ( ) Edition 10 Tel. + (0)2252 600-0 Fax + (0)2252 600- Web: www.klinger.kfc.at KLINGER Ballostar KHE: This ball valve offers more The design of
Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1
87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4
ON-OFF free flow valves Series MVMFL/BW
Series MVMFL/BW Technical data Size () Rating Connections Plug characteristic Action Temperature 15-25 PN 16 Butt weld (BW) Parabolic linear Manual handwheel from -30 to +150 C Description Manual micro-valve
Rosemount 405 Compact Orifice Primary Element
Rosemount 405 Compact Orifice Primary Element SPECIFICATIONS Performance Discharge Coefficient Uncertainty TABLE 20. 405 Compact Orifice Primary Element Type 405C (Conditioning Compact) 405P (1)(2) (Standard
Gilflo flowmeters. for steam, liquids and gases
Gilflo flowmeters for steam, liquids and gases The Gilflo spring loaded variable area flowmeter... offers an unrivalled 1:1 turndown and can be used to meter most industrial fluids including steam and
Run with higher performing, more versatile flow control.
Run with higher performing, more versatile flow control. Fisher easy-e Globe Valves Maximize your flow control options with these workhorses of the process control industry. You need less complexities
Available End Connections & Size Range
ECCENTRIC PLUG VALVES Size Range 3"-24" Water Working Hydrostatic Size Range Pressure psi Test psi 3"-12" 175 350 14"-24" 150 300 Available End Connections & Size Range Figure No. Flanged 3"-24" F-5412
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications.
Direct contact and metal-to-metal seating make the T-pattern globe stop valve ideal for most shut-off applications. Features Heavy integral Stellite hardfacing on both body and disc seating surfaces. Conical
8mm - 50mm (1/4-2 ) api 602 bs asme b16.34 mss sp 84
L&T FORGED STEEL GATE, GLOE & CHECK VALVES ASME 150-2500 8mm - 50mm (1/4-2 ) api 602 bs 5352 S 6364 asme b16.34 mss sp 84 Introduction L&T Forged Steel Gate, Globe and Check Valves have established themselves
Compact CATALOG. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Valve Finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High
Immersion Assembly for ph and Redox Sensors DipFit P CPA 140
Technical Information TI 178C/07/en No. 5008898 Immersion Assembly for ph and Redox Sensors DipFit P CPA 10 Immersion assembly with flange connection for demanding processes. Sensor holder with bayonet
GD Valves Rubber Lined - Centric EVS. Wouter Witzel - EVS /
DESIGN Body Flangeless wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E JIS 5K/10K/16K Face to Face EN558-1/2
KEYSTONE SWING TYPE WAFER CHECK VALVE FIGURE 86
High capacity, spring loaded swing type wafer check valve FEATURES Lightweight, wafer type check valve with face-to-face dimensions according ISO 5752, table 5 long High flow capacity featuring a special
D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
Pneumatic control and on/off valves for thermoelectric plants
BASIC REQUIREMENTS FOR QUALIFYING SUPPLY AND CONTRACTING COMPANIES Equipment category : FMVA11 Pneumatic control and on/off valves for thermoelectric plants Technical characteristics Page 1 of 8 CONTENTS
UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves
UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.
VALVE PRODUCT OVERVIEW
WATER MANAGEMENT VALVE PRODUCT OVERVIEW WATER MANAGEMENT Double Eccentric BFV DEX Main Specification Double Eccentric BFV DEX Model Body Disc Shaft Retaining ring Internal bolts External bolts Bearing
ISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries
AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS)
AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS) Double Flanged type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16 DESIGN Body Double Flanged type End Connection EN 1092 PN
APCO CDD-9000T DOUBLE DOOR CHECK VALVE TECHNICAL SPECIFICATIONS
BULLETIN 9000.00-2 SEPTEMBER 2015 APCO CDD-9000T DOUBLE DOOR CHECK VALVE TECHNICAL SPECIFICATIONS Materials of Construction DUCTILE IRON BODY Item Description Material A1 Body Ductile Iron, ASTM A536 A2
DISCOCHECK Dual-Plate Check Valves BB Short overall length according to DIN EN 558-1, table 11, series 16 (=^ DIN 3202, part 3, series K3)
pplication and Type PN pplication for liquids, gases and vapours Ø D 80 BB EN BB SME PN Class 150 suitable for heating, air-conditioning, water supply and cooling installations,for applications where minimum
McCANNA Ball Valves for Purified Terephthalic Acid Services
flowserve.com McCANNA Ball Valves for Purified Terephthalic Acid Services Experience In Motion 1 McCANNASEAL Valves Meet the Challenges of Purified Terephthalic Acid (PTA) Processes With its vast experience
Threaded Swing Check Valves
ISO 9001:2000 Certifi ed Certifi cate No. C2007-01814 Carbon Steel - Ductile Iron Swing Check Valve manufactured in compliance with: ASME B3.1 Pipe Threads Limited Compliance to: ASME B&PVC Sections 2
brands you trust. CRANE Iron Valves Copyright 2013 CRANE ChemPharma & Energy
brands you trust. CRANE Iron Valves Copyright 0 CRANE ChemPharma & Energy Key Features & Applications Key Features & Benefits Fully rated to ASME and MSS-SP Standards Full Pressure Class Offering: Class
Page 01 GLOBE CONTROL VALVE. Double seated globe valve, top and bottom guided. Single seated globe valve, top guided. Series GD.
Page 01 GLOBE CONTROL VALVE GU Single seated globe valve, top guided GD Double seated globe valve, top and bottom guided Single seated, top guided : 1/2-6 Rating : ANSI Class 150# - 4500# Connections :
Rosemount 9901 Chambers for Process Level Instrumentation
Reference Manual Rosemount 9901 Chambers for Process Level Instrumentation Reference Manual Safety instructions These safety instructions are to be read and used in conjunction with the manual of the
In-line Twin Pump. Type Series Booklet. Omega DSL
In-line Twin Pump Type Series Booklet Legal information/copyright Type Series Booklet All rights reserved. The contents provided herein must neither be distributed, copied, reproduced, edited or processed
ASME B31.3 Process Piping. 19. What s Different in B31.1
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. What s Different in B31.1-1 19. What s Different in B31.1 Scope Organization of the Code
NELES TOP ENTRY, ROTARY CONTROL VALVE, SERIES TOP 5
NELES TOP ENTRY, ROTRY CONTROL VLVE, SERIES TOP 5 Metso's Neles T5 series top entry rotary ball valves are designed to meet the requirements of chemical, petro-chemical and refining industries with improved
12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
Butterfly Valves - Figure 611 & 612
F611 Wafer style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. F612 Lugged style resilient seated bi-directional butterfly valve in sizes 50-300mm to 1600 kpa. Features
Operating Instructions
Operating Instructions A-2600 SERIES AWWA SWING CHECK VALVE 500 West Eldorado Street Decatur, Illinois 62522 www.muellercompany.com! WARNING! 1. Read and follow all pertinent instructions carefully. Proper
VGPG1114. Valve Group. Product Lines. Phönix Armaturen-Werke Daume Regelarmaturen Strack
VGPG1114 Valve Group Product Lines Phönix Armaturen-Werke Daume Regelarmaturen Strack At a Glance The businesses in Curtiss-Wright s Valve Group are leaders in designing and manufacturing highly engineered
BULLETIN MARCH DeZURIK VPB V-PORT BALL VALVES TECHNICAL SPECIFICATIONS
BULLETIN.00-2 MRCH 20 ezurik VPB V-PORT BLL VLVES TECHNICL SPECIFICTIONS 2 20 ezurik, Inc. Materials of Construction Flanged Construction 1 20" (25 500mm) Class 0 1 (25 300mm) Class 300 etailed (Enlarged)
Diaphragm seal with flange connection With internal diaphragm, threaded design Model
Diaphragm seals Diaphragm seal with flange connection With internal diaphragm, threaded design Model 990.12 WIKA data sheet DS 99.31 for further approvals see page 7 Applications Aggressive, contaminated,
Metal Seated Ball Valves
VALVES AND PIPELINE SUPPLIES Metal Seated Ball Valves FAST TRACK SUPPLY CLASS V & VI SHUT OFF The production of a zero maintenance, high performance metal seated valve has been the goal of many engineers.
Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded)
Sliding-Stem Live-Loaded Packing Product Bulletin Fisher ENVIRO-SEAL and HIGH-SEAL Packing Systems for Sliding-Stem Valves (Live-Loaded) Fisher ENVIRO-SEAL and HIGH-SEAL live-loaded packing systems offer
CATALOG C-FPV-0509 AHEAD OF THE FLOW. Fire Protection Valves
CATALOG C-FPV-0509 AHEAD OF THE FLOW Fire Protection Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products
brands you trust. Tufline Lined Ball Valves
brands you trust. Tufline Lined Ball Valves Materials Of Construction Part 911 &944 911XP & 944XP Valves Only Ball PFA Lined Steel or Ductile Iron PFA Lined Steel or Ductile Iron Body & Tail PFA
Ugitech Stainless steel solutions for the oil and gas industry
Ugitech Stainless steel solutions for the oil and gas industry 02 Stainless steel solutions for the oil and gas industry Ugitech and the Oil and Gas industry The world s conventional oil reserves are seriously
HIGH SEAL ULF Live Loaded Packing System
Instruction Manual HIGH-SEAL Live-Loaded Packing HIGH SEAL ULF Live Loaded Packing System Contents Introduction... 1 Scope of Manual... 1 Description... 2 Spring Selection... 3 Installation... 3 Parts
Control Valves for power plants and process plants
Control Valves for power plants and process plants SCHROEDAHL international The expert for developing and manufacturing individual high-quality valves for a wide range of power plant and industrial applications.
IS First edition
INTERNATIONAL STANDARD IS0 7005-2 First edition 1988-12-15 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION ORGANISATION INTERNATIONALE DE NORMALISATION MEXflYHAPOAHAfl OPTAHMA~Mfl I-IO CTAHflAPTMA~MM Metallic
Mueller Gas Products. Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI
Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI MUELLER NO-BLO FORGED
Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.
FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared
SECTION HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE)
SECTION 02623 HIGH DENSITY POLYETHYLENE PIPE AND FITTINGS (PRESSURE PIPE) PART 1 - GENERAL 1.1 SCOPE OF WORK A. Furnish all labor, materials, equipment and incidentals required and install high density
- Tensile strength of 50,000 psi per ASTM D-638 or 345 Mpa - Notched Izod impact strength of 35 ft-lb/in per ASTM D-256 or 1868 J/M are achieved.
PureFlex is a world leading manufacturer of high performance Fluoropolymer and Composite products and technologies. We specialize in the manufacturing of fluid handling and sealing products specifically
COMBINATION AIR VALVE
MINING DIVISION COMBINATION AIR VALVE FOR HIGH FLOW D-6NS SERIES DESCRIPTION The D-6NS Series Combination Air Valve has the features of both an air release valve and an air & vacuum valve. The air release
Baumann 16, 32, 54, and 70 Pneumatic Actuators
Baumann Pneumatic s Product Bulletin Baumann 16, 32,, and 70 Pneumatic s Baumann actuators are single acting, pneumatic actuators with spring-return action. They are compact, multi-spring actuators with
special male. Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions
82-200 special male Bronze 3-Piece Full Port Ball Valve With Male Brazed Extensions Solder end, 600 CWP (psig), Cold Non-Shock. 150 psig Saturated Steam. Vacuum Service to 29 inches Hg. Designed for soft
Underground fire hydrants
Underground fire hydrants The company was founded in 987 by transforming the former CSA, which was a trading company dealing with pipes and valves for water networks, into a manufacturing company, through
Cash Valve. Type C-776. ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve. Flow Control
Cash Valve Type C-776 ASME Section VIII Air/Gas and Cryogenic, UV National Board Certified Safety Valve Issued - April 2000 CAVMC-0515-US-1202 ISO 9001 Certified Flow Control Type C-776 - Cryogenic Safety
Weir Valve Selections
Unlined Metal Excellent Cvs Complete Selection of End Connections ASTM Materials Include: Cast Iron ASTM A-126 Class B Ductile Iron ASTM A-395 Grade 60-40-18 Cast Steel ASTM A-216 Grade WCB 316 Stainless
WP-SDC COPPER CAN REGISTER WOLTMAN WATER METER
WP-SDC COPPER CAN REGISTER WOLTMAN WATER METER WP-SDC Copper Can Register Woltman (Turbine) Belanto WP-SDC is TURBINE Woltman water meter with magnetic transmission, super dry type register for industrial
brands you trust. STOCKHAM - Iron Valves Copyright 2013 CRANE ChemPharma & Energy
brands you trust. STOCKHAM - Iron Valves Copyright 0 CRANE ChemPharma & Energy Key Features & Applications Key Features & enefits Fully rated to ASME and MSS-SP Standards Full Pressure Class Offering:
Pressure Regulators K Series
Pressure Regulators K Series 1 www.swagelok.com Pressure Regulators K Series Pressure-reducing models Back-pressure models Gas cylinder changeover model Vaporizing models 2 Pressure Regulators and Filters
FPD190 Differential pressure restriction orifice plates
Data sheet DS/FPD190 EN FPD190 Differential pressure restriction orifice plates Limits the flowrate or reduces the pressure of liquids, gases and steam Measurement made easy Orifice plate for flow restriction
GASKET MATERIALS. Click the Product Name to go Directly to Any Page Expanded PTFE Sheet Material QUIMFLEX SH 100% Expanded PTFE Sheet...
GASKET MATERIALS Click the Product Name to go Directly to Any Page Expanded PTFE Sheet Material QUIMFLEX SH 100% Expanded PTFE Sheet.... 2 Tealon Sheet Material Tealon TF1590........ 3 Tealon TF1580........
SECTION C1 DUCTILE IRON PIPE AND FITTINGS GENERAL
SECTION C1 DUCTILE IRON PIPE AND FITTINGS GENERAL This section covers the furnishing and installation of ductile iron water pipe, fittings, thrust restraint and pipe disinfection. Ductile Iron Pipe MATERIALS
Monolithic Isolation Fittings
Monolithic Isolation Fittings The Industry s Dual O Ring Seal Standard Tests Include: 100% Hydrostatic Pressure & Electrical Tests 100% Ultrasonic of Welds 100% Magnetic Particle of Welds 100% Dye Penetrant
diaphragm valves DV1 Series 2-Way Diaphragm Valves Typical Applications Analytical Instrumentation Petrochemical Pharmaceutical Chemical
DV1 Series 2-Way Diaphragm Valves The DV1 Series Diaphragm Valves are totally free of springs, bellows, packing, o-rings and lubricants in the process wetted area. Metal-to-metal seals to atmosphere ensure
SWI BALL VALVES. High Integrity Top Entry Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES
SWI BALL VALVES Ball Valves REQUEST A QUOTE sales@dkamans.com SCHEDULE SERVICES 562-529-8400 WWW.DKAMANS.COM We Manufacture Critical S ervice Valves For The Worlds Industries 1 2 TOP ENTRY TRUNNION MOUNTED
Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL
Made in USA TRUNNION MOUNTED BALL VALVE INSTALLATION, MAINTENANCE, & REPAIR MANUAL Corporation 3245 S. Hattie Oklahoma City, Oklahoma 73129 Telephone: (405) 677-3321 Fax: (405) 677-3917 Email:Balon@balon.com
SECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
APPLICATIONS. This circulator is suitable for drinking water only. Hot water accelerated circulation in distribution loops.
OPERATING LIMITS Flow rates up to : m /h Heads up to :, m Max. operating pressure : bar Max. loop temperature : +8 C Max. circulator temperature: C Max. ambient temperature : + C Water hardness (TH) :
1/2 2-1/2 (DN 15 65) STANDARD PORT AND 1/2 2 (DN 15 50) FULL PORT SERIES 4000 BALL VALVES Threaded End Socket Weld Butt Weld
1/ -1/ (DN 1 ) STANDARD PORT AND 1/ (DN 1 ) FULL PORT SERIES 000 BALL VALVES Threaded End Socket Weld Butt Weld The JAMESBURY Series 000 ball valves offer the three most desirable attributes of high-quality
Pneumatic butterfly valve
Pneumatic butterfly valve R V Specialized manufacture, Specialized service, RFS valve devote to satisfy user s expectation, improving service quality continuously. keeping improving. Ordering Code R V
Fisher Cavitrol III One, Two, and Three Stage Trims
Cavitrol III Trims D0096X0 Product Bulletin 80.:00 September 07 Fisher Cavitrol III One, Two, and Three Stage Trims Cavitrol III trims (figures,, and ) are used for cavitating liquid applications in various
AheAd OF the FlOw. Butterfly Valves
Catalog C-BFV-0912 AheAd OF the FlOw Butterfly Valves Business-to-Business Solutions Look to NIBCO for technology leadership. The velocity with which e-business evolves demands that new products and services
4 1 /2 MARK 73-5 AMERICAN FLOW CONTROL. It s What We Know. AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING 4 1 /2 MARK 73-5 FIRE HYDRANT
AMERICAN-DARLING FIRE HYDRANT AMERICAN-DARLING FIRE HYDRANT AMERICAN FLOW CONTROL It s What We Know. CONSTRUCTION AMERICAN-DARLING FIRE HYDRANT OPERATING NUT Cast one-piece bronze operating nut. Design
SECTION TAPPING SLEEVES AND VALVES
SECTION 33 12 16.17 TAPPING SLEEVES AND VALVES PART 1: GENERAL 1.01 SCOPE Furnish, install and test all tapping sleeves, tapping valves, and tapping saddles as shown on the Drawings. 1.02 RELATED WORK
NAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments
NAVSEA STANDARD ITEM ITEM NO: 009-52 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Relief Valve; repair 2. REFERENCES: 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and
MODELS PA1/PL1 BIO-SANITARY
TECHNICAL BULLETIN 5-17 ISO Registered Company MODELS PA1/PL1 BIO-SANITARY PRESSURE REDUCING REGULATORS The Models PA1 and PL1 are stainless steel pressure reducing regu la tors designed to handle small
2014 Company Profile R.L.Hill Engineering
2014 Company Profile R.L.Hill Engineering Your one stop shop for... PTA welded products High Temperature Fasteners Steam valve spares General Machining Turning, Milling & drilling Fabrication Sheet metal
Accessories - Universal Safety Heads
Accessories - Universal Safety Heads Pressures to 110,000 psi (7584 bar) Safety Heads/Rupture Discs - Safety Heads and Rupture Discs offer an economical and dependable relief port to guard against system
FORGED STEEL VALVES. 150# # Gate Globe Check. 4Evergreen Valve
FORGED STEE VAVES 150# - 2500# Gate Globe Check 4Evergreen Valve 4E is a Texas corporation valve company which was founded in 1993 by a group of enthusiastic people with more than 20 years of serving in
Process Inline Filter, Change-Over
Process Inline Filter, Change-Over -503-130x -520x 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Inline filters, types PRFL and duplex inline filters are designed for process engineering and chemical plants.
We Offer Both Cast Ball Valves & Forged Ball Valves.
11 GENEL SCREWED END BALL VALVES / FORGED BALL VALVES V-155 THREE PIECES BALL VALVES V-255 Full port : 1/4 2-1/2 (DN8-DN65) : 3/8 2-1/2 (DN10-DN65), Anti-static design ASTM A351 Gr.CF8M (1.4408) Full port