GES GRAPHITE. A Family of Carbon and Graphite Companies. Specialty Graphite
|
|
- Godwin Hart
- 6 years ago
- Views:
Transcription
1 GES GRAPHITE A Family of Carbon and Graphite Companies Specialty Graphite
2 GES GRAPHITE Quality, Service, and Consistency GES GRAPHITE has more than 50 years experience and is the leading distributor of graphite and carbon products in the Americas. We market and distribute graphite electrodes, specialty graphite, and cathode blocks. In addition, we offer many value added services including: warehousing, anti-ox coatings, re-packaging, and technical service. At GES, we guarantee and stand behind the quality of our products. We look forward to doing business with you in the future. 2
3 Specialty Graphite Overview Bulk Electrical Flexural Particle Size Density Resistivity Grade g/cm 3 inches / mm Ωinch / µωm psi / MPa psi / MPa PF / / / / 27 Block PFR / / / / 35 PFR-N / / / / 39 Round PDF / / / / 30 PDF-N / / / / 38 Rod PRD / / / / 35 PRD-N / / / / 40 GES Warehouse Facility in Emlenton, PA 3
4 Grade PF Block Specifications Description: Grade PF is an economical grade suitable for cost effective parts in many less demanding applications in several markets. Furnace parts Aluminum run-out tables Fused refractory molds Support plates/shelves Sizes: 26 x 26 x 72 Bulk Density ASTM C-838 lbs/ft g/cm Particle Size ASTM C-559 inches 0.08 mm 2 Electrical Resistivity ASTM C-830 Ωinch 4 µωm 10 Flexural ASTM C-651 psi 1850 MPa 13 ASTM C-695 psi 3950 MPa 27 Tensile ASTM C-565 psi 1900 MPa 13 Porosity ASTM C-611 % 23 % 23 ASTM E / F / C W/mK 140 Ash Content ASTM C-561 % 0.3 %
5 Grade PFR Block Specifications Description: Grade PFR is primarily the material of choice for higher density, better mechanical strength, and less porosity than grade PF. Grade PFR is the most popular multi-purpose grade. Casting molds and furnace parts for hot metal Boats and trays for sintering applications Crucibles for melting and alloying. Ingot Molds Sizes: 16 x 25 x 72, 20 x 20 x 72, 20 x 25 x x 32 x 72, 20 x 32 x 100, 20 x 37 x 72, 20 x 37 x 110 Bulk Density ASTM C-838 lbs/ft g/cm Particle Size ASTM C-559 inches mm 0.8 Electrical Resistivity ASTM C-830 Ωinch 3.1 µωm 8.0 Flexural ASTM C-651 psi 2300 MPa 16 ASTM C-695 psi 5100 MPa 35 Tensile ASTM C-565 psi 1900 MPa 13 Porosity ASTM C-611 % 18 % 18 ASTM E / F / C W/mK 160 Ash Content ASTM C-561 % 0.12 %
6 Grade PFR-N BLOCK Specifications Description: Grade PFR-N is primarily the material of choice for higher density, better mechanical strength, and less porosity than grade PFR. Grade PFR-N is 15-20% higher in strength than PFR. Casting molds and furnace parts for hot metal Boats and trays for sintering applications Crucibles for melting and alloying Bases for molten metal pumps Ingot Molds Vacuum Furnaces Sizes: 16 x 44 x 86, 16 x 48 x x 25 x 72, 20 x 37 x 74, 20 x 37 x 110 Bulk Density ASTM C-838 lbs/ft g/cm Particle Size ASTM C-559 inches mm 0.8 Electrical Resistivity ASTM C-830 Ωinch 3.1 µωm 8.0 Flexural ASTM C-651 psi 2750 MPa 19 ASTM C-695 psi 5650 MPa 39 Tensile ASTM C-565 psi 2000 MPa 14 Porosity ASTM C-611 % 17 % 17 ASTM E / F / C W/mK 160 Ash Content ASTM C-561 % 0.08 %
7 Grade PDF Round Specifications Description: Grade PDF offers a series of large diameter round billets, as a graphite with medium density and strength, for special applications best suited for the round. Furnace liners and support plates/shelves Induction furnace susceptors Pressure casting molds Centrifugal casting molds Large-diameter crucibles Sizes: 36 dia. x 23, 44 dia. x 23, 48 dia. x 23, 56 dia. x 20, 60 dia. 20 Bulk Density ASTM C-838 lbs/ft g/cm Particle Size ASTM C-559 inches mm 0.8 Electrical Resistivity ASTM C-830 Ωinch 4 µωm 10 Flexural ASTM C-651 psi 2000 MPa 14 ASTM C-695 psi 5000 MPa 30 Tensile ASTM C-565 psi 1700 MPa 12 Porosity ASTM C-611 % 20 % 20 ASTM E / F / C W/mK 140 Ash Content ASTM C-561 % 0.12 %
8 Grade PDF-N Round Specifications Description: Grade PDF-N is primarily the material of choice for applications when a graphite with higher density, better mechanical strength, and less porosity than Grade PDF is desired. Furnace Liners Induction furnace susceptors Pressure casting molds Centrifugal casting molds Large-diameter crucibles Sizes: 30 dia. x 20, 44 dia. x 16, 44 dia. x dia. x 23, 50 dia. x 15, 50 dia. x dia. x 20, 60 dia. x 20 Bulk Density ASTM C-838 lbs./ft g/cm Particle Size ASTM C-559 Inches mm 0.8 Electrical Resistivity ASTM C-830 Ωinch 3.1 µωm 8.0 Flexural ASTM C-651 psi 2600 MPa 18 ASTM C-695 psi 5500 MPa 38 Tensile ASTM C-565 psi 1700 MPa 12 Porosity ASTM C-611 % 15 % 15 ASTM E / F / C W/mK 160 Ash Content ASTM C-561 % 0.09 %
9 Grade PRD Rod Specifications Description: Grade PRD is an extruded graphite, primarily the choice for cost effective parts for less demanding applications. Furnace parts Ground anodes Molten metal pump shafts and posts Stirring rods Small crucibles Brazing rods Sizes: 2 to 24 dia. with lengths up to 86 Bulk Density ASTM C-838 lbs/ft g/cm Particle Size ASTM C-559 inches mm 0.8 Electrical Resistivity ASTM C-830 Ωinch 3.2 µωm 8 Flexural ASTM C-651 psi 2300 MPa 16 ASTM C-695 psi 5100 MPa 35 Tensile ASTM C-565 psi 1500 MPa 10 Porosity ASTM C-611 % 20 % 20 ASTM E / F / C W/mK 170 Ash Content ASTM C-561 % 0.1 %
10 Grade PRD-N Rod Specifications Description: Grade PRD-N is an extruded graphite with a higher density, better mechanical strength, and less porosity than Grade PRD an excellent option for more demanding applications. Furnace parts Stirring rods Molten metal shafts and posts Small crucibles Brazing rods Ground anodes Sizes: 2 to 24 dia. with lengths up to 86 Bulk Density ASTM C-838 lbs/ft g/cm Particle Size ASTM C-559 inches mm 0.8 Electrical Resistivity ASTM C-830 Ωinch 3.0 µωm 7.5 Flexural ASTM C-651 psi 2900 MPa 20 ASTM C-695 psi 5800 MPa 40 Tensile ASTM C-565 psi 2000 MPa 14 Porosity ASTM C-611 % 18 % 18 ASTM E / F / C W/mK 170 Ash Content ASTM C-561 % 0.1 %
11 Serving The Americas GES GRAPHITE GES Brazil, Inc. Headquarters 5628 Clifford Circle Birmingham, AL South America Presence Av. Marechal Rondon, 1400 Osasco-SP Brazil QSB-015 REV 01 11/18/2014
Global Innovation for your High Temp World
Premium Electrodes Global Innovation for your High Temp World Mission Statement Division of Fedmet Resources Corporation: We serve our clients in the high temp world by providing profitable solutions that
More informationGRAPHITE INDIA LIMITED
GRAPHITE INDIA LIMITED SPECIALITY DIVISION Uniquely special... CORPORATE PROFILE Incorporated in 1963 with Technical Collaboration with M/s. Great Lakes Carbon Corporation, USA. GIL Today is one among
More informationResource Guide. Section 3: Ductile Iron
Resource Guide Section 3: Ductile Iron Section 3 Ductile Iron Description of Grades... 3-3 65-45-12 Ferritic... 3-4 80-55-06 Partially Pearlitic... 3-6 100-70-02 Pearlitic... 3-8 4512 HRDS Heat Resistant...
More informationThe Effect of La Addition on the Microstructure and Tensile Properties of Hot-Extruded Al 15%Mg 2 Si Composite
The Effect of La Addition on the Microstructure and Tensile Properties of Hot-Extruded Al 15%Mg 2 Si Composite Paper Presenter: S.H. Allameh 1 A. Akhlaghi 2, M. Noghani 3, M. Emamy 4. 1,4- School of Metallurgy
More informationManufacture of Iron & Steel. Prepared By: John Cawley
Manufacture of Iron & Steel Prepared By: John Cawley Presentation Objectives Identify the basic steps in the production of steel. Identify the properties and uses of iron ore and pig iron. Differentiate
More informationSchunk Innovative Insulation Materials. Schunk Kohlenstofftechnik GmbH
Schunk Innovative Insulation Materials Schunk Kohlenstofftechnik GmbH Thermal Insulation at High Temperatures Carbon and Graphite Felt As a manufacturer of graphite felt for insulation in high-temperature
More informationA SHORT NOTE ON MANUFACTURING PROCESS OF METAL POWDERS
INTERNATIONAL JOURNAL OF RESEARCH IN COMPUTER APPLICATIONS AND ROBOTICS ISSN 2320-7345 A SHORT NOTE ON MANUFACTURING PROCESS OF METAL POWDERS 1 R.Raja, 2 M.Rajkumar 1 Assistant Lecturer, St. Joseph College
More informationPURIFIED GRAPHITE SILICON CARBIDE GRAPHITE ENHANCEMENT
PURIFIED GRAPHITE SILICON CARBIDE GRAPHITE ENHANCEMENT Innovative solutions for the Semiconductor Industry ISO 9001:2000 ISO 14001 For your wafer quality get our Ultra High Purity CARBONE LORRAINE offers
More informationBeta C Spring made from PAM Single Melt Input Stock
Beta C Spring made from PAM Single Melt Input Stock K.O. Yu 1, C.M. Bugle 2 and C. Pepka 3 1. RTI International Metals, Inc., Niles, OH 2. Dynamet Incorporated, Washington, PA 3. Renton Coil Spring Co.,
More informationALUMINUM POWDER METALLURGY
ALUMINUM POWDER METALLURGY Increased demand for light weight components, primarily driven by the need to reduce energy consumption in a variety of societal and structural components, has led to increased
More informationDegassing Components Unique Oxidation Resistance Treatment
Page 1/7 CGT Carbon is supplier of Carbon Graphite Materials and their Components including carbon graphite felt, rigid graphite felt, carbon-carbon composite and also quartz crucible. We offer these products
More informationWilliams Metals. Providing Welding & Metals Solutions for Over 50 Years. Non-Ferrous Metals. Setting the Standard for Excellence.
Williams Metals and Welding Alloys, Inc. Providing Welding & Metals Solutions for Over 0 Years Non-Ferrous Metals Setting the Standard for Excellence. Williams Metals and Welding Alloys is a multi-location
More informationBabalola et al: Proc. ICCEM (2012) Design and construction of tilting furnace for producing aluminium matrix composites
Design and construction of tilting furnace for producing aluminium matrix composites Babalola P.O., Inegbenebor, A.O and Bolu, C.A Mechanical Engineering Department, College of Science and Technology Covenant
More informationELECTRONICS. Purified Graphite Silicon Carbide Graphite Enhancement. Innovative solutions for the Semiconductor Industry
ELECTRONICS Purified Graphite Silicon Carbide Graphite Enhancement Innovative solutions for the Semiconductor Industry For your wafer quality get our Ultra High Purity Mersen offers to OEM and electronic
More informationRapid Hot Pressing Technology for Composite Materials Manufacturing
Rapid Hot Pressing Technology for Composite Materials Manufacturing Formatted Dai Huang 1, Irwin C. Lewis 2, Richard T. Lewis 2 1 GrafTech International Ltd, 12900 Snow Road, Parma, OH 44130, USA 2 Consultant
More informationHot Rolled. AK Steel produces Hot Rolled Steels to meet the strictest chemistry and dimensional requirements, in a wide variety of grades.
Hot Rolled STEELs P r o d u c t D ata B u l l e t i n AK Steel produces Hot Rolled Steels to meet the strictest chemistry and dimensional requirements, in a wide variety of grades. Consistency from coil
More informationVacuum Induction Melting Furnaces
Vacuum Induction Melting Furnaces VIM The Process A B C D E F G H I J Vacuum Induction Melting (VIM) is the melting of metal via electromagnetic induction under vacuum. An induction furnace containing
More informationCast steel: Group of ASTM standards for steel castings and forgings
Cast steel: Group of ASTM standards for steel castings and forgings Abstract: This group of ASTM specifications covers standard properties of steel and iron castings and forgings for valves, flanges, fittings,
More informationResource Guide. Section 4: Ni-Resist
Resource Guide Section 4: Ni-Resist Section 4 Ni-Resist Description of Grades... 4-3 201 (Type 1) Ni-Resist... 4-4 202 (Type 2) Ni-Resist... 4-6 Stock Listings... 4-8 4-2 Ni-Resist Description of Grades
More informationAdaption of metal injection molding to quinary high entropy alloys
Adaption of metal injection molding to quinary high entropy alloys A. Grimonprez 1, Y. Chen 1, A. Kauffmann 1, V. Piotter 1, J. Wagner 2, M. Heilmaier 1 1 Karlsruhe Institute of Technology, 2 University
More informationLaboratory-USDOE, Division of Materials Sciences and Engineering, Ames, IA 2Iowa Powder Atomization Technologies, Inc., Ames, IA
1Ames Laboratory-USDOE, Division of Materials Sciences and Engineering, Ames, IA 2Iowa Powder Atomization Technologies, Inc., Ames, IA Support for this work was provided by the Grow Iowa Values Fund (GIVF)
More informationUddeholm Formvar. FORMVAR is a trade mark registered in the European Union
Uddeholm Formvar FORMVAR is a trade mark registered in the European Union UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright
More informationImpact 7 Steel. A Durable, Dependable Steel Solution For Harsh Environments. Technical Data. Alloy Description. Alloy Type. Typical Applications
Impact 7 Steel Technical Data A Durable, Dependable Steel Solution For Harsh Environments Alloy Description As a world leader in steel manufacturing, TimkenSteel specializes in providing custom steel solutions
More informationTechnical Information
Technical Information Material Data Sheet Magnesium Mg KG High performance materials in form and function 2 Magnesium and Magnesium wrought alloys are the ideal material for extremely light components.
More informationOPTIMIZATION OF CASTING PARAMETERS ON Al/RHA COMPOSITE USING TAGUCHI METHOD
Advanced Materials Research Online: 2014-07-16 ISSN: 1662-8985, Vols. 984-985, pp 291-296 doi:10.4028/www.scientific.net/amr.984-985.291 2014 Trans Tech Publications, Switzerland OPTIMIZATION OF CASTING
More informationCopper sections for various applications
Copper sections Copper sections for various applications Company portrait The Wieland Group, with headquarters in Ulm, Germany, is one of the world s leading manufacturers of semi-finished and special
More informationOPTIMIZATION OF CASTING PARAMETERS FOR CASTING OF AL/RHA/RM HYBRID COMPOSITES USING TAGUCHI METHOD
OPTIMIZATION OF CASTING PARAMETERS FOR CASTING OF AL/RHA/RM HYBRID COMPOSITES USING TAGUCHI METHOD A. PAVAN KUMAR #1, B. JYOTHU NAIK *2, CH. VENKATA RAO #3, SADINENI RAMA RAO *4 1 M. Tech Student, Mechanical
More informationStandard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements 1
Designation: A 304 04 An American National Standard Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements 1 This standard is issued under the fixed designation
More informationInduction Skull Melting Furnaces
Induction Skull Melting Furnaces ISM The Process A B C D Induction Skull Melting ISM is a method of melting metals in a segmented, water-cooled copper vessel while under vacuum or controlled atmosphere
More informationHigh Performance Stainless Steel Long Products & Production Process of Daido Steel. ISSF-8 Seoul, Korea
1 High Performance Stainless Steel Long Products & Production Process of ISSF-8 Seoul, Korea May 17, 2004 Hiroo Inamori Co., Ltd 2 Consumption of Stainless Steel (SS) Long Products Rapid increase of consumption
More informationCOLD ROLLED STEEL S. Automotive. Appliances. Construction. Lighting. Office Furniture
COLD ROLLED STEEL S Automotive Appliances Construction Lighting Office Furniture COLD ROLLED STEELS provide excellent thickness and flatness tolerances, surface finish, and press formability. AK Steel
More informationSUGGESTED MANHOLE FRAME SEALING SPECIFICATION (Rehabilitation)
PART 1 GENERAL SUGGESTED MANHOLE FRAME SEALING SPECIFICATION (Rehabilitation) 1.01 SCOPE This specification includes the materials and procedures required for the internal sealing of the frame-chimney
More informationLecture 26 Degassing Practice
Lecture 26 Degassing Practice Contents: Degassing processes Ladle degassing Stream degassing Recirculation degassing Key words: degassing, hydrogen and nitrogen in steel, ladle degassing, recirculation
More informationAvailable online at ScienceDirect. Procedia Engineering 184 (2017 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 184 (2017 ) 418 422 Advances in Material & Processing Technologies Conference Development of Al-Zn-Cu Alloy for Low Voltage
More informationLecture 23. Chapter 30 Fusion Welding Processes. Introduction. Two pieces are joined together by the application of heat
Lecture 23 Chapter 30 Fusion Welding Processes Introduction Fusion welding Two pieces are joined together by the application of heat Melting and fusing the interface Filler metal Extra metal added (melted)
More informationMetal Forming Process. Prof.A.Chandrashekhar
Metal Forming Process Prof.A.Chandrashekhar Introduction Shaping of a component by the application of external forces is known as the metal forming. Metal forming can be described as a process in which
More informationFree Machining Martensitic stainless steel. Oxidation resistance in continuous service to 1200 F (650 C).
Description 416 is a free machining martensitic grade. The unique production process developed exclusively by Ugitech results in a product that delivers superior productivity and tool life, and improves
More informationProcessing of Metal Powders
Chapter 17 Processing of Metal Powders QUALITATIVE PROBLEMS 17.15 Why is there density variation in the compacting of powders? How is it reduced? The main reason for density variation in compacting of
More informationInvestigations on Mechanical properties of AL 8011 reinforced with micro B 4 C / Red Mud by Stir Casting Method
Investigations on Mechanical properties of AL 8011 reinforced with micro B 4 C / Red by Stir Casting Method C. KARTHIKKUMAR 1, R. BARANIRAJAN 2, I. PREMNAUTH 3, P. MANIMARAN 4 1, 2, 3 Students, Department
More informationHigh Performance Plastics for the Chemical Processing Industry
High Performance Plastics for the Chemical Processing Industry 8/2017 Thermoplastics Areas of application Steel pickling Plants Over the last two decades, polypropylenes have become a more common solution
More informationENGINEERING STANDARD PENETRANT ACCEPTANCE CRITERIA ES Prepared by: H. HOPKINSON Date: Reviewed by: J. MOELLER Date:
ENGINEERING STANDARD ES 2012 Prepared by: H. HOPKINSON Date: 12-21-90 Reviewed by: J. MOELLER Date: 12-27-90 Approved by: J. D. MOELLER Date: 12-27-90 John D. Moeller Director of Engineering 1 REVISIONS
More informationYttria Nanoparticle Reinforced Commercially Pure (CP) Titanium
Yttria Nanoparticle Reinforced Commercially Pure (CP) Titanium by Sesh Tamirisa ARL-CR-0680 September 2011 Prepared by FMW Composite Systems, Inc. 1200 W. Benedum Industrial Drive Bridgeport, WV 26330
More informationEffect of Silicon Carbide on Reactions between Molten Steel and Fused Magnesia Silicon Carbide Composite Refractory
Effect of Silicon Carbide on Reactions between Molten Steel and Fused Magnesia Silicon Carbide Composite Refractory Interactions between MgO SiC composite and liquid steel resulted in decomposition of
More informationThe Production of Titanium and Titanium Alloys Using Electron Beam Cold Hearth Single Melt
The Production of Titanium and Titanium Alloys Using Electron Beam Cold Hearth Single Melt David W. Tripp Development Manager, EBSM TIMET Morgantown, PA Titanium 2006 San Diego, CA Introduction Electron
More informationPowder Metallurgy Titanium and Titanium Alloy Components Manufactured from Hydrogenated Titanium Powders
Powder Metallurgy Titanium and Titanium Alloy Components Manufactured from Hydrogenated Titanium Powders Georg I. Abakumov, V.S. Moxson, Vladimir Duz, Mykhailo Matviychuk, Viktor Sukhoplyuyev October 7
More informationThe final version of this chapter appeared in. Silicon Germanium. Cronin B. Vining Jet Propulsion Laboratory/ California Institute of Technology
Cronin B. Vining, page 1 The final version of this chapter appeared in &5&+DQGERRNRI7KHUPRHOHFWULFV Ed. by D. M. Rowe (CRC Press; London, ISBN: 0849301467) 1995. Silicon Germanium Cronin B. Vining Jet
More informationCopper & Copper Alloys CuNi1Si (OF 2403)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others Min. Rem. - - - - - 1.0-0.4 - - - - Max. - - 0.02-0.2
More information1. Definitions and classification of Metal forming processes
1. Definitions and classification of Metal forming processes 1.1 Introduction: Metal forming is a very important manufacturing operation. It enjoys industrial importance among various production operations
More informationHow properties of thermoplastics are affected by processing.
How properties of thermoplastics are affected by processing. Nick Barron Global Industry Manager Oil & Gas, Röchling nbarron@sustaplast.de 2nd June 2016 Material processing and its effects - NKF 1 Presentation
More informationLANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS
LANE ENTERPRISES, INC. STANDARDS & SPECIFICATIONS The following pages are an index of standards and specifications associated with Lane products. For quick reference purposes, Lane products are shown below
More informationUni-Seals Product Catalog
Uni-Seals Product Catalog www.uni-seals.com 0 Index Graphite Series CL1020 Woven graphite cloth.. 2 TA1020 Woven graphite tape 3 TA1027 Woven graphite tape with self-adhesive... 3 Asbestos Series CL2020
More informationDaikin Polyflon PTFE Products
Positively Innovative Daikin Polyflon PTFE Products Product Information Guide for Aqueous Dispersions Fine Powders Granular Molding Powders Daikin America, Inc. / www.daikin-america.com / 845-365-9500
More informationVacuum Arc Remelting (VAR)
ALD Vacuum Technologies High Tech is our Business Vacuum Arc Remelting (VAR) Vacuum Arc Remelting Processes and Furnaces VAR Vacuum Arc Remelting (VAR) ALD is one of the leading suppliers of vacuum melting
More informationDiscover the NYCAST Advantage. Cast Nylon Stock Shapes & Custom Cast Products
Discover the NYCAST Advantage Cast Nylon Stock Shapes & Custom Cast Products Discover the NYCAST Advantage Cast Nylons Limited (CNL) is the premier producer of cast nylon in North America. Our people,
More informationUltra High Molecular Weight Polyethylene (UHMWPE)
Ultra High Molecular Weight Polyethylene (UHMWPE) UTEC is the trade name of the Ultra High Molecular Weight Polyethylene (UHMWPE) developed and produced by Braskem with its own catalyst and production
More informationWear Characteristics of Unalloyed and alloyed LM25-Aluminium casting
Wear Characteristics of Unalloyed and alloyed LM25-Aluminium casting Patel Hiteshkumar 1*, Menghani Jyoti 2 S.V. National Institute of Technology, Surat 395 007, Gujarat, India * Corresponding author (E-mails:
More informationSHORT FIBRE RIGID INSULATION AND SOFT FELT
TECHNICAL GUIDE SHORT FIBRE RIGID INSULATION AND SOFT FELT SHORT FIBRE AND SOFT FELT FOR THERMAL INSULATION FOR FURNACE WORKING UNDER VACUUM OR INERT GAS + THE RIGHT ENGINEERED SOLUTION ADAPTED TO YOUR
More informationThe following steps are used in the powder metallurgy techniques:
Advantages of Powder Metallurgy Virtually unlimited choice of alloys and non metallicswith associated properties. * A variety of metal or non metal powders can be used. * Refractory materials are popularly
More informationComparative Investigation of Mechanical Properties of Aluminium Based Hybrid Metal Matrix Composites
(AET- 29th March 24) RESEARCH ARTICLE OPEN ACCESS Comparative Investigation of Mechanical Properties of Aluminium Based Hybrid Metal Matrix Composites Dinesh Kumar*, Jasmeet Singh** *(Research scholar,
More informationSECTION REINFORCING STEEL
SECTION REINFORCING STEEL 1. DESCRIPTION This specification shall govern the furnishing and placing of reinforcing steel, deformed and smooth, of the size and quantity designated on the plans and in accordance
More informationSpecial Bar Quality Steel:
Special Bar Quality Steel: Helping Customers Push the Bounds of What s Possible TimkenSteel is a leading special bar quality (SBQ) steel maker of small, intermediate and large bars up to 16" (406 mm) in
More informationAluminum Extrusion Alloy Guides
Aluminum Extrusion Alloy Guides There are two extrusion processes, direct and indirect. With direct, the ingot moves relative to the container wall; with indirect, the die moves. Under pressure, the ingot
More informationIMF Ingot Metallurgy Forum
IMF Ingot Metallurgy Forum 19 th Annual Ingot Metallurgy Symposium September 27, 2006 THE RAMM MOLDS by Horacio Lima 1 TABLE CONTENTS: PAGE 3. HTCI- GRAY IRON MOLD BY RAMM 4. TAILORED DUCTILE IRON MOLDS
More informationLight Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
More informationThese elements are in carbon steels in minimal amounts, usually less than 1%.
Alloy Steels Weld Tech News VOL 1. NO. 11 WELD TECH NEWS is a newsletter for welders working primarily in maintenance and repair. Each issue contains useful information on materials (cast irons, steels,
More informationThe World s Most Advanced Specialty Metals Manufacturing Facility Athens Operations
The World s Most Advanced Specialty Metals Manufacturing Facility Athens Operations From design, to equipment, to production efficiencies, the visionary Athens facility incorporates the best practices
More informationPowder Metallurgy Preparation of metal powders by Atomization Electrolytic process Reduction. 15CY104: Material Technology SRM University 2
Powder Metallurgy Preparation of metal powders by Atomization Electrolytic process Reduction 15CY104: Material Technology SRM University 2 Powder metallurgy is a term covering a wide range of ways in which
More informationSynthetic and Natural Graphite
Synthetic and Natural Graphite The relative applications and fundamentals of the synthetic ti and natural graphite markets Tom Burkett Vice President GMS SGL Group Industrial Minerals Graphite & Graphene
More informationMELTING, CASTING, AND PROCESSING OF NICKEL AND IRON ALUMINIDES. VINOD K. SIKKA Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN
MELTING, CASTING, AND PROCESSING OF NICKEL AND IRON ALUMINIDES VINOD K. SIKKA Oak Ridge National Laboratory, P.O. Box 2008, Oak Ridge, TN 37831-6083 A process for successful melting of Ni3AI- and Fe3Al-base
More informationEffect of Hardness on A413 intermetallic Alloy with the influence of typical heat treatment
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) e-issn: 2278-1684,p-ISSN: 2320-334X, Volume 14, Issue 4 Ver. V (Jul. - Aug. 2017), PP 18-23 www.iosrjournals.org Effect of Hardness on A413
More informationSteel Forgings: Design, Production, Selection, Testing, and Application. Edward G. Nisbett. ASTM Stock No. MNL53
Steel Forgings: Design, Production, Selection, Testing, and Application Edward G. Nisbett ASTM Stock No. MNL53 INTERNATIONAL Standards Worldwide ASTM International 100 Barr Harbor Drive PO Box C700 West
More informationHOT-ROLLED COIL. Contents. 1. Company Profile 2
HOT-ROLLED COIL Contents 1. Company Profile 2 2. Integrated Steel Mill Instruction 4 3. Typical Specification 5 3.1 Chemical Compositions & Mechanical Properties 5 3.2 Tolerances 11 4. Available Manufacturing
More informationMetal Matrix Composite (MMC)
Matrix Metal Matrix Composite (MMC) The matrix is the monolithic material into which the reinforcement is embedded, and is completely continuous. This means thatt there is apath throughh the matrix ti
More informationRAPID PATTERN BASED POWDER SINTERING TECHNIQUE AND RELATED SHRINKAGE CONTROL
RAPID PATTERN BASED POWDER SINTERING TECHNIQUE AND RELATED SHRINKAGE CONTROL Jack G. Zhou and Zongyan He ABSTRACT Department of Mechanical Engineering and Mechanics Drexel University 3141 Chestnut Street
More information30ChGSA Included in 13 standards (CIS Countries)
Standards GOST 10702-78 GOST 11268-76 GOST 12132-66 GOST 21729-76 GOST 23270-89 GOST 4543-71 GOST 8731-74 GOST 8733-87 GOST R 54159-10 TU 14-1-1213-75 TU 14-1-1409-75 TU 14-1-4118-76 TU 14-4-385-73 Steel
More informationHalar ECTFE. Ethylene-Chlorotrifluoroethylene Typical properties
Halar ECTFE Ethylene-Chlorotrifluoroethylene Typical properties Halar ECTFE A unique combination of properties Halar ECTFE is a melt-processable fluoropolymer manufactured by Solvay Solexis in Orange,
More informationLAMINAR BARRIER INERTING FOR SPECIALTY STEELMAKING
INTRODUCTION PROCESS TECHNOLOGY CONFERENCE PROCEEDINGS VOLUME 11 ATLANTA, GA 1992 Ultra-Refining Processes for Specialty Steelmaking A PUBLICATION OFTHE IRON AND STEEL SOCIETY Reprinted from 11th Process
More informationNickel Based Superalloy Incoloy 800 (UNS N08800)
Nickel Based Superalloy Incoloy 800 (UNS N08800) Nickel-Iron-Chromium alloy Incoloy 800 has fine strength and suitable resistance to oxidation and carburization at high temperatures. It offers elevated
More informationUnderstanding of Inclusions - Characterization, Interactions and Boundaries of Removability with Special Focus on Aluminium melts
WERKSTOFFWOCHE, Dresden 14.09.2015 Understanding of Inclusions - Characterization, Interactions and Boundaries of Removability with Special Focus on Aluminium melts Bernd Friedrich IME Process Metallurgy
More informationMaterial and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More informationProduction of Steel by the
Production of Steel by the Bessemer Process By E. F. Ketterer* THE pneumatic steelmaking process invented by William Kelly and Henry Bessemer, and commonly known as the bessemer process, has been in use
More informationALL METALS & FORGE GROUP
ALL METALS & FORGE GROUP All Metals & Forge Group is an ISO9001:2008, AS/EN9100:2009 Rev. C manufacturer of open die forgings and seamless rolled rings, a certification it obtained and has held since 1994.
More informationHigh Modulus Carbon Fibres in Super-Structural Compounds
High Modulus Carbon Fibres in Super-Structural Compounds As a matter of fact, even if composite properties guarantee the best answer to the most severe project requirements, many industrial products can
More informationELECTRIC INDUCTION FURNACE
ELECTRIC INDUCTION FURNACE The electric induction furnace is a type of melting furnace that uses electric currents to melt metal. Induction furnaces are ideal for melting and alloying a wide variety of
More informationbrands you trust. Tufline Lined Ball Valves
brands you trust. Tufline Lined Ball Valves Materials Of Construction Part 911 &944 911XP & 944XP Valves Only Ball PFA Lined Steel or Ductile Iron PFA Lined Steel or Ductile Iron Body & Tail PFA
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 2759/3D Issued OCT 1984 Revised FEB 2005 Superseding AMS 2759/3C Treatment Precipitation-Hardening Corrosion-Resistant and Maraging Steel Parts 1. SCOPE: This specification,
More informationMarcegaglia USA Munhall
Marcegaglia USA Munhall 1 Marcegaglia USA The Marcegaglia USA production facility is located in Munhall, PA (just outside Pittsburgh). It is devoted to the manufacturing of stainless steel, duplex and
More informationSINTERABILITY OF HIGH-SPEED STEELS M2, M3/2 AND T15
SINTERABILITY OF HIGH-SPEED STEELS, M3/2 AND Romário Mauricio Urbanetto Nogueira CEFET/PR UNED/MD romarioun@ig.com.br César Edil da Costa DEM-CCT/UDESC edil@joinville.udesc.br Keywords high speed steels,
More informationENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD. ANSI/SCTE (Formerly IPS SP 100)
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 15 2006 (Formerly IPS SP 100) Specification for Trunk, Feeder and Distribution Coaxial Cable NOTICE The Society
More informationREVIEW OF MICROSTRUCTURE AND PROPERTIES OF NON- FERROUS ALLOYS FOR WORM GEAR APPLICATION & ADVANTAGES OF CENTRIFUGALLY CAST GEARS
REVIEW OF MICROSTRUCTURE AND PROPERTIES OF NON- FERROUS ALLOYS FOR WORM GEAR APPLICATION & ADVANTAGES OF CENTRIFUGALLY CAST GEARS GIRI RAJENDRAN JASON HASSEN MCC INTERNATIONAL INC OVERVIEW OF NON-FERROUS
More informationDirect Powder Rolling (DPR) of Titanium. Light Metals Flagship D.Cantin, P.Kean, N.A. Stone, R.Wilson, M.A. Gibson, D.Ritchie, R.
Direct Powder Rolling (DPR) of Titanium. Light Metals Flagship D.Cantin, P.Kean, N.A. Stone, R.Wilson, M.A. Gibson, D.Ritchie, R. Rajakumar Titanium 2010 Orlando, Florida 3-6 October 2010 Manufacture of
More informationC O N F I D E N T I A L
C O N F I D E N T I A L 1 Please Print or Type Company Name Main Office Address of Company THE ALUMINUM ASSOCIATION, INC. MEMBERSHIP APPLICATION City State Zip/Province Code Country Phone Number Fax Number
More informationATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718)
ATI 718 Nickel-Base Superalloy (UNS Designation N07718) INTRODUCTION ATI 718 alloy (N07718) is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately
More informationAlro Steel. Tool & Die Steel. Handbook. A Helpful Guide to the Properties, Selection, & Heat Treatment of Tool Steels.
Alro Steel Metals Industrial Supplies Plastics Tool & Die Steel Handbook A Helpful Guide to the Properties, Selection, & Heat Treatment of Tool Steels. MISSION STATEMENT To ensure the long-term success
More informationSpecialty Graphites for the Semiconductor Industry
Graphite Materials and Systems Specialty Graphites for the Semiconductor Industry 2 Specialty Graphite and Process Solutions made by SGL Group. Advanced material, equipment, and process solutions Engineered
More informationCOMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS
INCH-POUND A-A-59440/2B 21 May 2012 SUPERSEDING A-A-59440/2A 23 May 2005 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS
More informationHASTELLOY B-3 alloy Principal Features
HASTELLOY B-3 alloy Principal Features Exceptional resistance to HCl and H 2 SO 4 and enhanced structural stability HASTELLOY B-3 alloy (UNS N10675) exhibits extremely high resistance to pure hydrochloric,
More informationD.1 High Integrity Magnesium Automotive Castings (HI-MAC)
D.1 High Integrity Magnesium Automotive Castings (HI-MAC) STATEMENT OF WORK Objective Vehicle weight reduction is a key enabler to meet future stringent CAFE requirements, and this can best be achieved
More informationLeadership in Soft Magnetic Alloys
Leadership in Soft Magnetic Alloys Carpenter Technology Corporation offers a wide selection of soft magnetic alloys to meet your material specifications. Choose from high permeability alloys, shielding
More information