Versamid 280 B-75. Technical Data Sheet. Properties. Applications. Product Description or liquid epoxy resins.
|
|
- Georgiana Hall
- 6 years ago
- Views:
Transcription
1 Technical Data Sheet Versamid 280 B-75 Product Description Key Features & Benefits Chemical Composition Versamid 280 B-75 is a polyamide/epoxy adduct in n-butanol designed for reaction with solid or liquid epoxy resins. - Good flow and leveling properties - Low moisture sensitivity during cure - Excellent solvent and chemical resistance properties - Excellent compatibility with solvent-free liquid epoxy resins Polyamide/epoxy adduct in n-butanol Properties Product Specifications Amine value mg KOH/g at 25 C 4,300 9,000 cps Gardner color 8 max Typical Characteristics Amine value 250 mg KOH/g Amine hydrogen equivalent weight (theoretical) 165 at 25 C 6,200 cps Gardner color lbs/gal Flash point (Seta) 97 F 75% by wt Solvent n-butanol These typical values should not be interpreted as specifications. Applications Versamid 280 B-75 is a polyamide/epoxy adduct in n-butanol designed for reaction with solid or liquid epoxy resins. It offers excellent compatibility with Bisphenol A-based epoxy resins allowing normal induction times to be reduced and occasionally be eliminated. Epoxy resin systems based on Versamid 280 B-75 provide unusually good flow and leveling properties and low moisture sensitivity during cure. Coating formulations containing Versamid 280 B-75 have fast drying times similar to Versamid 125 and show excellent solvent and chemical resistance properties compared to Versamid 140. Versamid 280 B-75 is suitable in maintenance coatings, primers, and enamel paint formulations. It provides excellent compatibility with solvent-free liquid epoxy resins for formulation of high solids coatings. Coating formulations based on Versamid 280 B-75 and Versamid G 2000 meet the stringent requirements outlined in US Navel Specifications Mil P for corrosion-resistant primers and topcoats. July 2017 Page 1 of 6
2 Versamid 280 B-75 and epoxy resin systems are recommended for applications such as: Industrial maintenance coating applications Primers Enamel paint formulations Processing Mix ration with 190 EEW liquid epoxy resin is 87 phr. Due to chemical reaction, Versamid 280 B-75 and epoxy resins should not be mixed until just prior to use. Typical Properties of a Versamid 280 B-75 Cured Coating Tack-free time Through-cure time 24 hours Pot life Cured with 190 EEW epoxy resin. Typical Chemical Resistance Properties of Unfilled Castings Chemical Result 10% Acetic acid Softening, blistering 10% Hydrochloric acid Softening 10% Sulfuric acid Discoloration 10% Sodium hydroxide No effect Methyl ethyl ketone Softening Xylene Slight softening Mineral spirits No effect Distilled water No effect Formulations Percent weight gain after 7-day C followed by a 21-day 25 C Green Primer Formula Grind: Epoxy resin solution Anti-settling paste Titanium dioxide Calcium metasilicate Iron oxide Silica High flash Naphtha Pigments are dispersed to give an NS fineness grind reading of at least 6 and let down with the following under continuous moderate agitation. Letdown: Phthalo blue paste High flash Naphtha Diacetone alcohol Toluene MIBK Total 1, Formulation attributes, 67 KU 12.7 lbs/gal Pigment 54.9% 74.1% by wt, 54.5% by volume Pounds Gallons Versamid 280 B Versamid G Total Formulation attributes, at 25 C 5,000 7,000 cps 8.0 lbs/gal 76.5% by wt, 72.5% by volume July 2017 Page 2 of 6
3 and B are thoroughly mixed 4:1 by volume and allowed to induct approximately 30 minutes prior to use. Formulation attributes, and (mix system at spray application) Stoichiometry EEW:AHEW 1:1 Application Conventional spray, siphon feed (theoretical) 74.2% by wt, 57.5% by volume 75.7% by wt, 75.9% by wt (ambient cure) VOC 3.0 lbs lbs/gal PVC 37.64%, admixed (Zahn #2) 27 seconds (2 x viscosity) Dry time at 25 C 8 hours Through cure (B-K recorder) 12 hours Film properties (7 days ambient cure, sandblasted CRS, 50 mil) Dry film thickness 4 mil Gloss, Adhesion 4B, very good Pencil hardness 4H Flexibility, mandrel Pass ½ Direct impact resistance 40 inch lbs Reverse impact resistance 2 inch lbs MEK double rubs, 200 No effect Brushing properties Excellent Corrosion and Solvent Resistance Testing Duration Test Results 5% Salt Fog General Panel Attack Scribe Attack 500 hours No corrosion, no blisters 2/32 creep 1,000 hours No corrosion, no blisters 3/32 creep 2,000 hours No corrosion, F# 8,6 6/32 creep Solvent Immersion Pencil ness Initial Post Immersion MEK, 14 days 4H HB Xylol, 14 days 4H H Duration Test Results Tap Water Immersion 6 months No corrosion, no blisters 5% Brine Immersion 6 months No corrosion, M #6, 4 Cleveland Humidity Exposure 6 months No blisters Dark Gray Topcoat Formula High fine 80 magnesium silicate Titanium dioxide Butyl alcohol Carbon black Total 1, July 2017 Page 3 of 6
4 Formulation attributes, and 55.8% by volume, + B 10.2 lbs/gal 10.4 lbs/gal PVC 27.1% Gloss, White Topcoat Formula Titanium dioxide Butyl alcohol Total 1, Formulation attributes, and 53.9% by volume, + B 11.0 lbs/gal 12.1 lbs/gal PVC 26.5% Gloss, Exterior Black Topcoat Formula High fine 80 magnesium silicate Titanium dioxide Butyl alcohol Carbon black D Total 1, July 2017 Page 4 of 6
5 Formulation attributes, and 54.5% by volume, + B 10.1 lbs/gal 10.2 lbs/gal PVC 26.4% Gloss, Red Topcoat Formula Versamid 280 B Magnesium silicate Titanium dioxide Yellow iron oxide Red iron oxide Butyl alcohol Epoxy resin Diatomaceous silica Magnesium silicate Super high flash Naphtha Total 1, Disperse pigment in both parts to give an NS fineness of grind reading of at least 3. Parts A and B are Formulation attributes, and 61.0% by volume, + B 11.1 lbs/gal 12.6 lbs/gal 9.7 lbs/gal PVC 26.5% KU Gloss, Haze-gray Topcoat Formula High fine 80 magnesium silicate Titanium dioxide Butyl alcohol Carbon black D Total 1, July 2017 Page 5 of 6
6 Formulation attributes, and 55.5% by volume, + B 10.2 lbs/gal 10.3 lbs/gal PVC 27.6% Gloss, Safety General Safety Data Sheet The usual safety precautions when handling chemicals must be observed. These include the measures described in Federal, State, and Local health and safety regulations, thorough ventilation of the workplace, good skin care, and wearing of protective goggles. All safety information is provided in the Safety Data Sheet for Versamid 280 B-75. Storage Versamid 280 B75 may absorb moisture and carbon dioxide if left in open containers, which may result in an increased viscosity and some foaming when curing epoxy resins. Therefore, it should be kept in tightly closed containers when not in use and stored in a cool, dry place. Properly stored and protected, an unopened container of Versamid 280 B75 should have a shelf life of two years. Important While the descriptions, designs, data and information contained herein are presented in good faith and believed to be accurate, they are provided for guidance only. Because many factors may affect processing or application/use, Gabriel Phenonies Inc. recommends that the reader make tests to determine the suitability of a product for a particular purpose prior to use. NO WARRANTIES OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESCRIPTIONS, DESIGNS, DATA OR INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. In no case shall the descriptions, information, data or designs provided be considered a part of Gabriel's terms and conditions of sale. Further, the descriptions, designs, data, and information furnished by Gabriel hereunder are given gratis and Gabriel assumes no obligation or liability for the descriptions, designs, data or information given or results obtained all such being given and accepted at the reader's risk. Versamid is a registered trademarks of Gabriel Phenoxies Inc. *Versamid G-2000 was previously BASF Genamid 2000 GABRIEL PHENOXIES INC. 808 CEL-RIVER ROAD ROCK HILL, SC USA TEL: (803) July 2017 Page 6 of 6
AROFLINT 810 Product Code: Acid Functional Polyester for Two-Package Polyester Epoxy Systems
April 2010 AROFLINT 810 Product Code: 91859-00 Acid Functional Polyester for Two-Package Polyester Epoxy Systems DESCRIPTION AROFLINT 810 is an acid functional polyester resin supplied at 70% solids in
More informationSECTION 1045 PAINT FOR STRUCTURAL STEEL
SECTION 1045 PAINT FOR STRUCTURAL STEEL 1045.1 Paint and Paint Material. 1045.1.1 General. All single component paints shall be ready-mixed at the factory to comply with the specification formula for the
More informationOUDRACure WB 8002 Waterborne Epoxy Curing Agent
Technical Data Sheet OUDRACure WB 8002 Waterborne Epoxy Curing Agent Description Aqueous polyamine adduct designed to work with Type 1 epoxy dispersions for maintenance and protective coatings for concrete
More informationRefer to Substrates & Surface Preparation.
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Dry Film Thickness Aliphatic Acrylic Polyurethane Thin film, high gloss finish with exceptional weathering performance
More informationCorlar 2.8 HG High Solids Epoxy
Corlar 2.8 HG High Solids Epoxy GENERAL DESCRIPTION A high build, high solids, two-component, VOC conforming (2.8 lbs./gal.), high gloss epoxy based on Axalta modified polyamide epoxy technology. The resulting
More informationCarboguard 890 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Cycloaliphatic Amine Epoxy Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial
More informationEpoxy Curing Agents and Modifiers
Epoxy Curing Agents and Modifiers Curing Agent DESCRIPTION curing agent is a highperformance modified polyamide intended for use with epoxy resins in two-part ambient cure coatings. Special features of
More informationCorlar 2.1 PR-P High Solids Productive Epoxy Primer
Corlar 2.1 PR-P High Solids Productive Epoxy Primer GENERAL DESCRIPTION A high solids, two component, VOC conforming (2.1 lbs./gal.) Low HAPS productive primer based on Axalta modified polyamide epoxy
More informationCorlar 2.1 PR-P High Solids Productive Epoxy Primer For Use With FG-040, FG-041 or FG-042 Activators
Corlar 2.1 PR-P High Solids Productive Epoxy Primer For Use With FG-040, FG-041 or FG-042 Activators GENERAL DESCRIPTION A high solids, two component, high build, VOC conforming (2.1 lbs./gal.) Low HAPS
More informationAR555 Waterborne Epoxy Resin
Epoxy Curing Agents and Modifiers ANCAREZ TM AR555 Waterborne Epoxy Resin DESCRIPTION Ancarez AR555 resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for
More information10P20-14 High Solids Low IR Primer
Technical Data Sheet Product Group Epoxy Primer Characteristics Product Information - A high solids primer for aircraft exteriors meeting the low infrared reflectance requirements of the referenced specification.
More information64C1-2-A High Temperature Resistant Insulative Coating
Product Group Characteristics Product Information High temperature coating is formulated for use as a high temperature insulation coating for environments with continuous exposure to temperatures up to
More informationAliphatic Acrylic-Polyester Polyurethane
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Dry Film Thickness Aliphatic Acrylic-Polyester Polyurethane High build, low sheen finish that has excellent resistance
More information3 Scotch-Weld TM. Epoxy Adhesive 2158 B/A. Technical Data December, 2009
3 Scotch-Weld TM Technical Data December, 2009 Product Description 3M Scotch-Weld is a gray, two-part, high strength adhesive that chemically cures at room temperature. It has good adhesion to a variety
More information4002A21M Aluminum Lipskin Coating
Technical Data Sheet Product Group High heat coating Characteristics Product Information This specialty coating is designed for use on the leading edges of aluminum alloy nose cowl inlets. It is formulated
More informationPRODUCT GUIDE: ZINC-RICH COATINGS. Version:
PRODUCT GUIDE: ZINC-RICH COATINGS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy,
More informationPerformance Minerals Extenders. For Coatings and Inks
Performance Minerals Extenders For Coatings and Inks BASF Performance Minerals Enhance Coatings and Inks In addition to being the world's leading chemical company, BASF is also a world-leader in surface
More informationtwo component high build amine adduct cured phenolic epoxy primer
5 pages Revision of January 2003 DESCRIPTION two component high build amine adduct cured phenolic epoxy primer PRINCIPAL CHARACTERISTICS primer coat in the Sigma Phenguard tank coating system excellent
More information3 Scotch-Weld TM. Structural Adhesive Primer EC Technical Data August, 2002
3 Scotch-Weld TM Technical Data August, 2002 Introduction 3M Scotch-Weld is a sprayable corrosion inhibiting adhesive primer. It provides a high degree of protection against corrosive environments both
More informationApproved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method F (29 C) calculated VOC-US/Hong Kong
Approved 20920;16620 1 20920 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured epoxy coating. It is a fast drying, zinc phosphate pigmented, high solids, high build product.
More informationCorlar LV PR 178 Series Epoxy Primer
Corlar LV PR 178 Series Epoxy Primer GENERAL DESCRIPTION A two-component very low VOC corrosion-resistant epoxy primer designed to be extremely tough and durable. When properly activated, the combined
More informationCorrosion Protection for Fisher Valves
Corrosion Protection Product Bulletin Corrosion Protection for Fisher Valves Control valves operate in some of the most severely corrosive conditions imaginable. Valves used near or on the sea are constantly
More informationMix ratio (by volume): (base component) (activator component) (thinner component)
TECHNICAL DATA SHEET Product Description DeSoto High Temperature urethane primer is a heat resistant coating that can withstand an operating temperature of 232 C (450 F). is used over aluminum and composite
More informationHuber s Hydral Coat 2 Ultrafine Alumina Trihydrate (ATH) A New Super-Functional Extender for Coil Coatings
uber s ydral Coat 2 Ultrafine Alumina Trihydrate (AT) A New Super-Functional Extender for Coil Coatings Coil coatings are highly functional, designed to protect the substrate while providing superior aesthetic
More informationUltra-Low VOC Waterborne Alkyd Coatings for Metal Protection
Ultra-Low VOC Waterborne Alkyd Coatings for Metal Protection Erin Vogel, Ph.D. Research Scientist Industrial Coatings R&D, Dow Coating Materials Dow Chemical Company April 13, 2016 1 Agenda Alkyd Overview
More informationScotch-Weld TM. Epoxy Adhesive/Coating Technical Data July, 2011
Scotch-Weld TM Technical Data July, 2011 Product Description 3M Scotch-Weld is an amber tinted thermosetting adhesive/coating for metal to metal bonding and coating. It can be used to assemble laminated
More informationNACORR Rust & Corrosion Inhibitors
King Industries provide formulators the means to impart corrosion resistance to aqueous and non-aqueous systems. NACORR can be used as the primary corrosion inhibitor or in combination with environmentally
More informationNCI for Industrial Applications. Restore Highly Oxidized & Colors. Extend Freshly Painted or Existing Paint by 10+ Years
NCI for Industrial Applications Restore Highly Oxidized & Colors Du Extend Freshly Painted or Existing Paint by 10+ Years Industrial Market Before After with NCI Industrial asset owners commonly apply
More information10P2-3 Anti-static Conductive Flat Black Epoxy Coating
Technical Data Sheet Product Group Conductive epoxy coating Characteristics Product Information This epoxy coating is designed to produce an anti-static conductive film on fiberglass components. It can
More informationProperty Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1
2080;2081 1 2080 epoxy VValidationDate). 1 Product description This is a two component polyamide cured epoxy coating. It is a high solids, high build product. Designed as a mid coat in systems for new
More informationA-4300 Clear Silicone Aliphatic Polyurea Technical Data Sheet
A-4300 Clear Silicone Aliphatic Polyurea Technical Data Sheet PRODUCT DESCRIPTION: A-4300 Clear Silicone Aliphatic Polyurea is a two component 100% solids, no VOC s, silicone aliphatic polyurea that was
More information58 Series Polyurethane topcoat
Product Group Polyurethane topcoat Characteristics Product Information - This two component high solids polyurethane finish is formulated for application to military aircraft, and is designed to provide
More informationScotch-Weld Metal Bonder Acrylic Adhesive DP8407NS Gray
Scotch-Weld Metal Bonder Acrylic Adhesive Preliminary Technical Data Sheet October 2017 Product Description is a high performance, two-part acrylic adhesive that offers excellent shear, peel, and impact
More informationSimalfa 308fR. Product Description. Features and Benefits. Physical Properties
Revised: 12.12.2013 Simalfa 308fR Product Description Simalfa 308FR was designed specifically for the aerospace industry where the need for specialty flame retardant products are required. This adhesive
More informationOne-coat application 5 LV650 Clear 2 LV650 Hardener 1 LV650 Reducer Anti-Graffiti (#484165)
Description Autocoat BT is a two component VOC compliant clear coat that provides excellent chemical resistance and stain repellent properties. is designed for original equipment and repairs of commercial
More informationSP-100 Equipment Wash SP-110 Tool Cleaner
DESCRIPTION: ADVANTAGES: USES: APPLICATION: SP-4888 Damp Surface Coating is a two-component epoxy coating developed specifically for application on wet or damp steel surfaces. In addition, it may be applied
More informationMaximum Rust Protection!
ZERO-RUST Zero Rust is a direct-to-metal, phenolic modified alkyd rust and corrosion control coating, which controls rust and corrosion by putting down an impermeable barrier at the steel level. Its dielectric
More informationNORTH AMERICA EPOXY CURING AGENTS EPOXY
NORTH AMERICA EPOXY CURING AGENTS EPOXY A ROBUST TOOLBOX TO MEET DIVERSE FORMULATION AND END-USE REQUIREMENTS With a heritage built on more than 60 continuous years in the industry, Olin is the reliable
More information3 Scotch-Weld TM. Structural Adhesive Film AF 31. Technical Data March, 2006
3 Scotch-Weld TM Technical Data March, 2006 Introduction 3M Scotch-Weld is an unsupported, thermosetting structural film adhesive designed for metal-to-metal bonding. It is especially designed for high-temperature
More informationProperty Test/Standard Description. US EPA method 24 (tested) (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)
Approved 402;2522 1,2 2522 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a high zinc dust containing product. It conforms to
More information3 Scotch-Weld TM. Epoxy Adhesive EC Technical Data November, 2010
3 Scotch-Weld TM Technical Data November, 2010 Product Description 3M Scotch-Weld is a one-part, 100% solids, thermosetting liquid adhesive. Advantages Exceptionally high strength at service temperatures
More informationProduct Information CHEMGLAZE B 9942 A/B. Coating for Casting Pits. Easy Application Chemglaze B 9942 A/B will bond to damp and wet surfaces.
Product Information Chemical Products Division CHEMGLAZE B 9942 A/B Coating for Casting Pits. FEATURES BENEFITS. Easy Application Chemglaze B 9942 A/B will bond to damp and wet surfaces. Will build to
More informationProduct Data Sheet. Crosslinker CX-100
is a 100% active polyfunctional aziridine liquid crosslinker. Addition of one to three percent to acrylic emulsions or waterborne urethane polymers produces a marked improvement in water, chemical, abrasion,
More informationPremium Acrylic Conformal Coating 419D Technical Data Sheet 419D-Liquid
Description Premium Acrylic Conformal Coating Our 419D Premium Acrylic Conformal Coating is a fast drying, xylene and toluene free product that provides an excellent finish. This one part coating is easy
More informationImron 1.8 FT-C Flat Waterborne Polyurethane Clearcoat
Imron 1.8 FT-C Flat Waterborne Polyurethane Clearcoat GENERAL DESCRIPTION A flat gloss, isocyanate-free, single component, 1.8 lbs/gal VOC conforming, zero HAPs coating based on unique Axalta waterborne
More informationSP-100 Equipment Wash SP-110 Tool Cleaner SP-120 Internal Storage Lubricant
DESCRIPTION: SP-9888 Pipe Lining is based on the latest Zero VOC Novolac Technology. The product cures to a highly cross-linked coating with excellent chemical, solvent and water immersion resistance.
More informationPARALOID WR-97 Water-Reducible Acrylic Resin
PARALOID WR-97 Water-Reducible Acrylic Resin Description PARALOID WR-97 water-reducible acrylic solution resin can be crosslinked with urea and melamine resins to produce general purpose industrial coatings.
More informationPremium Acrylic Conformal Coating 419D Technical Data Sheet 419D-Liquid
Description Premium Acrylic Conformal Coating Our 419D Premium Acrylic Conformal Coating is an IPC-CC-830B and UL 94-V0 certified, fast drying, xylene and toluene free product that provides an excellent
More informationHigh Performance, Cost Effective Waterborne Epoxy Concrete Protection
High Performance, Cost Effective Waterborne Epoxy Concrete Protection Coatings for Concrete Conference, Coating the World of Concrete February 2, 2009, Westin Casuarina Las Vegas Hotel, Las Vegas, NV INTRODUCTION
More informationAerocron 2100 Anionic Epoxy Primer
Anionic Epoxy Primer TECHNICAL DATA SHEET Product Description is an anionic epoxy electrocoat primer technology designed to provide optimal corrosion protection over aircraft substrates. It is a chrome-free,
More information3 Scotch-Weld TM. Instant Wood Adhesives and Surface Activator. Technical Data April, 2007
3 Scotch-Weld TM Technical Data April, 2007 Product Description 3M Scotch-Weld Instant Wood Adhesives and 3M Surface Activator are single component, room temperature-curing adhesives that provide remarkable
More informationPOLYLITE TLP Series Low-Profile, Low-Styrene Marine Laminating Resins
August 2012 Low-Profile, Low-Styrene Marine Laminating Resins DESCRIPTION of resins are pre-promoted(*), thixotropic (*), low-profile, unsaturated polyester resins developed for fabricating small to large
More informationFORTEC % SOLIDS HIGH BUILD EPOXY COATING SYSTEM
FORTEC 05 00% SOLIDS HIGH BUILD EPOXY COATING SYSTEM FOR PROFESSIONAL USE ONLY; NOT FOR SALE TO OR USE BY THE GENERAL PUBLIC Product Description: FORTEC 05 SUPERSTICK HI-BUILD is a 2 component epoxy resin
More informationSurf Clear EVO Epoxy system for surfboards
Page 1 / 6 Surf Clear EVO Epoxy system for surfboards Sicomin Surf Clear EVO epoxy system is specially formulated for the manufacturing of surf boards. Surf Clear EVO is suitable for hand lay up of glass,
More informationSilGrip* PSA595 Pressure Sensitive Adhesive
Technical Data Sheet SilGrip* PSA595 Pressure Sensitive Adhesive SilGrip* PSA595 Pressure Sensitive Adhesive Description PSA595 silicone pressure sensitive adhesive is a xylene solution of polysiloxane
More informationCoating Types. Coating Systems. Coating Basics. Why coatings are used Component of coatings Methods of protection Service environment
Coating Basics Why coatings are used Component of coatings Methods of protection Service environment Coating types Curing mechanism Design characteristics Limitations Suitable Use Coating Systems Coating
More informationVapor-Clear. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring
advanced moisture control, inc. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring 250 polished concrete slabs! Made in Southern California,
More informationRHOPLEX EC % Acrylic Polymer for Elastomeric Coatings
EC-3814 0% Acrylic Polymer for Elastomeric Coatings Description EC-3814 0% acrylic polymer emulsion is Rohm and Haas Company s newest development in acrylic polymer technology for elastomeric wall coatings.
More informationMidsun HVIC silicone is not affected by UV light, temperature, corrosive environments, or ATH pitting from dry band arcing.
Midsun 570 Midsun HVIC silicone is not affected by UV light, temperature, corrosive environments, or ATH pitting from dry band arcing. Because the coating is highly water repellent, contaminant s cannot
More informationThe Best of Both Worlds!
The Best of Both Worlds! The Best of Both Worlds! A benchmark high-performance polyurethane paint that limits VOC to less than 50g/L or.4172 lbs/gal while delivering superior color and durability. High
More informationRTV630B. Technical Data Sheet
Technical Data Sheet Description blue two component silicone rubber compound cures at room temperature to a high strength silicone rubber. This product is supplied in a matched kit of base (A) component
More informationValspar InspireME Coil and Extrusion Product Guide Specification Section Shop-Applied Coatings for Metal
When you re looking for inspiration you have a new source. valsparinspireme.com is an online experience brimming with ideas and possibilities to fuel your creativity. Valspar InspireME Coil and Extrusion
More informationNathan Kofira Technical Development Manager
Nathan Kofira Technical Development Manager Overview 1 2 3 Types of Corrosion in Coatings Mechanisms of Corrosion Corrosion Inhibitor Selection 4 Formulating with Anti-Corrosives 5 Temporary Rust Prevention
More informationSAMPLE SPECIFICATION
SAMPLE SPECIFICATION Section 02760 Paving Specialties STREETCOAT Epoxy Modified Traffic Coating System IDEAL FOR VEHICULAR TRAFFIC, BIKE LANES AND COATING STAMPED ASPHALT SURFACES 1.0 GENERAL 1.1 Summary
More information1.4 kg/l (11.4 lb/us gal) Maximum 295 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) 50 to 63 μm (2.0 to 2.
DESCRIPTION One-component, heat-resistant silicone acrylic topcoat primarily for the PPG HI-TEMP 1027 primer or the PPG HI-TEMP 222 G primer. PRINCIPAL CHARACTERISTICS Heat-resistant silicone acrylic topcoat
More information4970 PRIME COAT FZ Two components zinc phosphate epoxy product
Converter name Destination Extremely versatile use: industrial vehicles, agricultural machines, different metal surfaces, (trussing, external pipes). Contains zinc phosphate as anticorrosive pigment. Doesn
More informationProperty Test/Standard Description
Approved 29560;29561 1 29560 zinc silicate ^(ValidationDate) 1 Product description This is a two component ceramically reinforced polyamide cured zinc rich epoxy coating. 1:1 mixing ratio for easy use
More informationScotch-Weld Toughened Epoxy Adhesives LSB60 and LSB60NS
3 Scotch-Weld Toughened s Technical Data Sheet October 2017 Product Description 3M TM Scotch- s are high performance, two-part, toughened epoxy adhesives offering outstanding shear adhesion and very high
More informationSilGrip* PSA518 Pressure Sensitive Adhesive
Technical Data Sheet SilGrip* PSA518 Pressure Sensitive Adhesive SilGrip* PSA518 Pressure Sensitive Adhesive Description PSA518 silicone pressure sensitive adhesive is a xylene solution of phenyl based
More information3M Scotchkote Fusion-Bonded Epoxy Coating 6233P
3M Scotchkote Fusion-Bonded Epoxy Coating 6233P Data Sheet July 2015 Handling and Safety Precautions: Read all Health Hazard, Precautionary and First Aid, Material Safety Data Sheet, and/or product label
More informationDouble your sustainability. Water-based resins for industrial metal coatings
Double your sustainability Water-based resins for industrial metal coatings 2 Double your sustainability The professional protection by water-based emulsions Trends and standards in the industrial metal
More informationGRIP-GARD PLUS BRUSH / ROLL ADDITIVE
Description The GRIP-GARD PLUS Brushing/Rolling Additive is designed to convert GRIP-GARD PLUS spray paint into a coating that can be used for brush & roll application. 100 Grip Gard Plus (High Gloss)
More informationSPECIFICATIONS AND TYPICAL PROPERTIES* ZACLON POTASSIUM SILICATES, TECHNICAL. Wt% SiO2. Wt% mesh <10% -200 mesh <1%
DATA SHEET ZACSIL POTASSIUM SILICATES Zaclon potassium silicates (trade name ZACSIL ) are a group of products with properties that vary with the ratio of silica to potassium oxide. They are designed to
More informationPOLYMER CONCRETE 100 EPOXY POLYMER CONCRETE DILUTE ACIDS RESISTANCE
RECOMMENDED APPLICATIONS Polymer Concrete 100 is a three-component, epoxy polymer concrete used for the construction of chemical resistant floors, pads, curbing, trenches and sumps. Polymer Concrete 100
More informationRTV 11. RTV 11, Silicone Rubber Compound
, Silicone Rubber Compound Product Description RTV11 silicone rubber compound is a general purpose two-part silicone elastomer. It is supplied in ready-to-use with a base compound and DBT (dibutyl tin
More informationProperty Test/Standard Description
Approved 612;617 1,2 617 epoxy ^(ValidationDate) 1 Product description This is a two component, polyamide cured, high molecular weight epoxy coating. Designed as a primer for new construction. Can be used
More informationSTERI-COAT P. Multi Functional, Pigmented High Build Epoxy Novolac Coating, For Wall & Ceiling Applications mils GREEN BUILDING FEATURES
GREEN BUILDING FEATURES * Steri-Coat P contributes toward satisfying credit MR 5 and EQ 4.2 under LEED. Low emitting material Low installation odor Processed and manufactured in Ohio APPLICATION FEATURES
More informationSample Specification
Sample Specification Section 02760 Paving Specialties StencilCoat Commercial Asphalt and Concrete Surfacing System 1.0 GENERAL 1.1 Summary The StencilCoat Commercial Asphalt Surfacing System is a 100%
More informationPre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 C.
Approved 402;2521 1,2 2521 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms
More informationOmya Construction omya.com. Enhancing Titanium Dioxide WITH CALCIUM CARBONATE
Omya Construction omya.com Enhancing Titanium Dioxide WITH CALCIUM CARBONATE Unique Portfolio of Titanium Dioxide Performance Enhancers OPACIFYING CALCIUM CARBONATE FILLERS HELP TO DEVELOP THE FULL POTENTIAL
More informationHeresite VR-514 TECHNICAL DATA SHEET. VR-514 Typical Properties. Our 50 years of coating history speaks for itself.
Heresite VR-514 Our 50 years of coating history speaks for itself. In 1964, Heresite was the first company to apply coatings to aluminum-finned, copper-tubed heat exchangers. The Heresite coating became
More informationApproved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method 1 32 C calculated VOC-US/Hong Kong. US EPA method 24 (tested)
Approved 30060;30061 1,2 30060 polyurethane ^(ValidationDate) 1 Product description This is a two component chemically curing aliphatic acrylic polyurethane coating. It has a glossy finish with very good
More informationReactive Diluents for Achieving High Solids Acrylic Polyurethane Coatings
Reactive Diluents for Achieving High Solids Acrylic Polyurethane Coatings Christopher Letko, John Argyropoulos, Amber Stephenson Technical Contact: CSLetko@dow.com Marketing Contact: ALWatkins@dow.com
More informationAJICURE. AH-203 Amine adduct Modified MY-24. Faster cure.
AJICURE LATENT CURING AGENTS AND ACCELERATORS PRODUCT Structure type Particle size Melting point ( C) Recommended usage * Special feature av. (micron) (softening point) as hardener as accelerator PN-23
More informationTwo component solvent-free epoxy system for creation of self-levelling floors. Gloss >4% <70% 83mg IR4
Two component solvent-free epoxy system for creation of self-levelling floors Fields of Application Epoxol Floor P is a suitable screed that can be applied on cement-based floors which need high mechanical
More informationTechnical Data Sheet September 2017
Scotch-Weld s and Technical Data Sheet September 2017 Product Description s and are high performance, two-part epoxy adhesives offering outstanding shear and peel adhesion, and very high levels of durability.
More informationTested in accordance with ISO , high expected durability in corrosivity category C5-I. Property Test/Standard Description
Approved 7461;7680 1,2 7680 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a high solids, high zinc dust containing product. It
More informationSolvents Eastman isobutyl isobutyrate (IBIB)
Eastman isobutyl isobutyrate (IBIB) CH 3 O CH 3 CH CH 2 O C CH CH 3 CH 3 Introduction Eastman isobutyl isobutyrate (IBIB) is an economical ester retarder solvent that is used in nitrocellulose lacquers,
More information1.4 kg/l (11.4 lb/us gal) Maximum 272 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) To 650 C (1200 F) To 538 C (1000 F)
DESCRIPTION One component heat resistant silicone topcoat for use in an elevated temperature coating system, primarily for application over PPG HI-TEMP 1027 primer PRINCIPAL CHARACTERISTICS Heat resistant
More informationCA8310B (Activator) CA8360 meets the performance requirements of: Mil-PRF FS BS2X34B
Desothane HS Polyurethane Topcoat Near Matt TECHNICAL DATA SHEET Product Description is a high durability, polyurethane topcoat, designed for use as both an internal topcoat for aircraft structural components
More informationDehypon GRA. Technical Information. = Registered trademark of BASF Nonionic, low foaming surfactant for the detergent and cleaner industry
Technical Information Dehypon GRA September 2014 Supersedes issue dated July 2014 08_140402e-02/Page 1 of 5 Last change WF-No. 5047 = Registered trademark of BASF Nonionic, low foaming surfactant for the
More informationDate of issue: 5 October 2017 Page: 1/6
Approved 16560;16561;16840 1,2 16560 epoxy mastic ^(ValidationDate) 1 Product description This is a two component polyamine cured epoxy mastic coating. It is a surface tolerant, abrasion resistance, high
More informationERC5 Erosion Resisting Polyurethane Coating
TECHNICAL DATA SHEET Product Description Components is a two pack, polyurethane erosion resisting coating developed for the protection of strike areas and leading edges of aircraft. When applied over the
More informationMcKinnon Materials, Inc th Commerce Park Blvd. Tampa FL, Phone: (813) Fax: (813)
PHYSICAL PROPERTIES: Composition: Solids Content: Mix Ratio: 3 to 1 Viscosity: Pot Life: McKinnon Materials, Inc. 5612 56 th Commerce Park Blvd. Tampa FL, 33610 Phone: (813) 622-7031 Fax: (813) 621-9017
More informationApplication Guide AC- 130 Metal Alloy Surface Preparation For Bonding
Application Guide AC- 130 Metal Alloy Surface Preparation For Bonding SCOPE This document describes the process for the application of AC- 130 pre-bond surface treatment to facilitate adhesive bonding
More information3 Scotch-Weld TM Flexible Epoxy Adhesive LSB90
3 Flexible Preliminary Technical Data Sheet February 2012 Product Description 3M TM is a high performance, two-part, flexible epoxy adhesive offering high shear and peel adhesion and very high levels of
More information3M Scotch-Weld Epoxy Adhesive
3 Scotch-Weld TM Technical Data August, 2005 Description is a flexible, two-part, room temperature curing epoxy with high peel and shear strength. Scotch-Weld epoxy adhesive is identical to EC-2216 B/A
More informationROSHIELD 3275 Hydroxyl Functional High-Performance Acrylic Emulsion for Wood Coatings
ROSHIELD 3275 Hydroxyl Functional High-Performance Acrylic Emulsion for Wood Coatings Description ROSHIELD 3275 acrylic emulsion is specifically designed for reaction with polyisocyanates, such as Bayer
More informationSolution Vinyl Resin
Solution Vinyl Resin Solution Vinyl Resin Vinisol resins are high performance soluble vinyl polymers that can be used alone or in combination with other polymers, including acrylics, urethanes, alkyds
More informationFlooring and Bedding. RonaFloor SL. Self-smoothing seamless epoxy resin flooring system
FEATURES self smoothing epoxy floor screed seamless high strength decorative good chemical resistance easy to clean can be applied to green concrete with use of RonaFloor Epoxy DPM Description RonaFloor
More information