NextGen Epoxy WB Epoxy System (EPI-REZ Resin 7520-WD-52 and Research Curing Agent RSC-4431)
|
|
- Dale Wilkerson
- 6 years ago
- Views:
Transcription
1 NextGen Epoxy WB Epoxy System (EPI-REZ Resin 7520-WD-52 and Research Curing Agent RSC-4431) 1
2 Waterborne Coatings Sustainability & Product Innovation We take an integrated business approach to sustainability with ultimate goal of creating long-term stakeholder value through environmental and product stewardship, risk management, safety and compliance. Our sustainability initiative can be grouped into three broad categories Product innovation Operational excellence Good corporate citizenship Waterborne High Solids Hexion believes and pursues the waterborne technology platforms for coating systems to contribute environment, health and safety 2
3 Conventional Solvent-borne Epoxy Coatings Solid Epoxy Supplied in solution EPOXY COATINGS (2K) EPOXY RESIN CURING AGENT Highly viscous polyamide Supplied in solution Epon Resin 1001-X-75-type and EPIKURE Curing Agent 3115-X-70 Limitations High VOC > 450 g/l Immiscibility / Long induction time Slow Dry Short recoat window Strong odor Needs induction due to large differences in solubility parameters 3
4 Waterborne SER Epoxy Dispersion Value Engineered EPI-REZ 7520-WD-52 EPI-REZ 7520-WD- 52 Research Curing Agent RSC-4431 NextGen Epoxy WB System Cost Efficient and Low VOC SER Dispersion High Performance Shelf and Shear Stable Property ER7520-WD-52 A cost effective, low-voc, HAPSfree and high performance WB SER Dispersion performing similar to SB epoxy coating system Solids (wt.%) 52 Viscosity (cp) <6000 EEW Solvent (%) 5% 4
5 Waterborne SER Epoxy Dispersion Value Engineered EPI-REZ 7520-WD-52 Target End Markets: ACE (Agricultural and Construction Equipment Metal Auto Parts and Accessories Industrial Maintenance Railway Coatings Concrete Floors Walls Ceilings 5
6 Waterborne SER Epoxy Dispersion Value Engineered EPI-REZ 7520-WD-52 Excellent Corrosion Resistance Fast Dry EPI-REZ Resin 7520-WD-52 Economical Low VOC ( <100 g/l): metal (<50 g/l) concrete Ease of formulation & application Freeze/thaw stable Shelf stable 6
7 Research Curing Agent RSC-4431: Water Reducible Curing Agent Cost Effective & High Performance EPI-REZ 7520-WD- 52 Research Curing Agent RSC-4431 NextGen Epoxy WB System Water reducible curing Agent Cost Effective Low VOC WB Coating for metal and concrete coating Properties RSC-4431 Competitive Solids AHEW Color Viscosity 10,700 30,000 7
8 Research Curing Agent RSC-4431: Water Reducible Curing Agent High performance WB curing agent, for use with SER resin dispersions, for metal and concrete coatings Cost Effective Easier conversion to WB <50 g/l VOC Environmental Benefits Compliance with changing global regulations Low AHEW (Dosage) Low curing agent demand = Lower cost Improved corrosion performance Lower Color Can be used as primer and topcoat Formulation Low viscosity / water-reducible Shelf and Shear Stable 8
9 NextGen Epoxy WB System High Performance WB Metal Primer Property* ASTM Rating Dry film thickness D mil Through dry D-5895B 7.5 h Pencil hardness D-1186 H Adhesion D A/5B Salt Spray Resistance B h Blister, field D-714 No blisters Scribe creep D-1654 <1 mm Adhesion D A NextGen Epoxy Waterborne System Cost Effective Coating System Superior Performance Low VOC Metal: ( <100 g/l) Concrete (<50 g/l) Ease of Application - Shelf Stable -Shear Stable RSC-ER7520/4431 ER7520/EK6870 *14-day cure at 77 o F, 55% RH 9
10 High Gloss Concrete Formulation RSC EPI-REZ 7520-WD-52 Properties Values VOC <50 Dry film thickness 3-4 Dry times (h) Set to Touch, Stage II 1 Cotton Free, Stage III 9 Through, Stage IV 18 Pencil hardness, 7 days F Adhesion 5A/5B Direct impact 116 Reverse impact 88 Flexibility 32 Dollies pull-off >300 MEK resistance >200 Gloss & viscosity pot-life** >5 *Dollies pull-off and MEK resistance done on concrete **24-hour gloss was >95 at 60 o for more than 5 hours Concrete Laneta Ultra Low VOC (<50 g/l) No Induction time High Gloss & Long potlife (5-6h) Fast dry Excellent adhesion & Flexibility 10
11 NextGen Epoxy Waterborne System Cost-Effective Coating System NextGen Epoxy Waterborne System Performance - Adhesion - Corrosion - Blister -Freeze/Thaw Stability Low VOC Metal: ( <100 g/l) Concrete (<50 g/l) Ease of Application - Pigment wetting - Shelf Stable -Shear Stable Waterborne Coating System with improved cost and performance balance! 11
ADVANCED PROTECTIVE COATING SYSTEM Breakthrough Protective Top Coat and High Performance Epoxy Primer
ADVANCED PROTECTIVE COATING SYSTEM Breakthrough Protective Top Coat and High Performance Epoxy Primer VSC 12 TOPCOAT VSC 11 PRIMER Traditional heavy-duty protective coating systems typically utilize a
More informationOUDRACure WB 8002 Waterborne Epoxy Curing Agent
Technical Data Sheet OUDRACure WB 8002 Waterborne Epoxy Curing Agent Description Aqueous polyamine adduct designed to work with Type 1 epoxy dispersions for maintenance and protective coatings for concrete
More informationCoating Types. Coating Systems. Coating Basics. Why coatings are used Component of coatings Methods of protection Service environment
Coating Basics Why coatings are used Component of coatings Methods of protection Service environment Coating types Curing mechanism Design characteristics Limitations Suitable Use Coating Systems Coating
More informationAROFLINT 810 Product Code: Acid Functional Polyester for Two-Package Polyester Epoxy Systems
April 2010 AROFLINT 810 Product Code: 91859-00 Acid Functional Polyester for Two-Package Polyester Epoxy Systems DESCRIPTION AROFLINT 810 is an acid functional polyester resin supplied at 70% solids in
More information10P20-14 High Solids Low IR Primer
Technical Data Sheet Product Group Epoxy Primer Characteristics Product Information - A high solids primer for aircraft exteriors meeting the low infrared reflectance requirements of the referenced specification.
More informationUltra-Low VOC Waterborne Alkyd Coatings for Metal Protection
Ultra-Low VOC Waterborne Alkyd Coatings for Metal Protection Erin Vogel, Ph.D. Research Scientist Industrial Coatings R&D, Dow Coating Materials Dow Chemical Company April 13, 2016 1 Agenda Alkyd Overview
More informationNathan Kofira Technical Development Manager
Nathan Kofira Technical Development Manager Overview 1 2 3 Types of Corrosion in Coatings Mechanisms of Corrosion Corrosion Inhibitor Selection 4 Formulating with Anti-Corrosives 5 Temporary Rust Prevention
More informationCorlar 2.1 PR-P High Solids Productive Epoxy Primer For Use With FG-040, FG-041 or FG-042 Activators
Corlar 2.1 PR-P High Solids Productive Epoxy Primer For Use With FG-040, FG-041 or FG-042 Activators GENERAL DESCRIPTION A high solids, two component, high build, VOC conforming (2.1 lbs./gal.) Low HAPS
More informationPRODUCT GUIDE: ZINC-RICH COATINGS. Version:
PRODUCT GUIDE: ZINC-RICH COATINGS Version: 08.07.17 305 Zinc Rich Epoxy Polyamide Primer Description: 305 is a user friendly zinc-rich epoxy primer formulated for use as a primer under acrylic, epoxy,
More informationEpoxy Moisture Vapor Reduction / Mitigation for Flooring. April 2015
Epoxy Moisture Vapor Reduction / Mitigation for Flooring April 2015 Agenda Overview of Ancamine 2739 curing agent What s a perm? Why moisture vapor barriers Performance testing Certifications Summary 2
More informationCorlar 2.8 HG High Solids Epoxy
Corlar 2.8 HG High Solids Epoxy GENERAL DESCRIPTION A high build, high solids, two-component, VOC conforming (2.8 lbs./gal.), high gloss epoxy based on Axalta modified polyamide epoxy technology. The resulting
More informationCorlar 2.1 PR-P High Solids Productive Epoxy Primer
Corlar 2.1 PR-P High Solids Productive Epoxy Primer GENERAL DESCRIPTION A high solids, two component, VOC conforming (2.1 lbs./gal.) Low HAPS productive primer based on Axalta modified polyamide epoxy
More information58 Series Polyurethane topcoat
Product Group Polyurethane topcoat Characteristics Product Information - This two component high solids polyurethane finish is formulated for application to military aircraft, and is designed to provide
More informationHigh Performance, Cost Effective Waterborne Epoxy Concrete Protection
High Performance, Cost Effective Waterborne Epoxy Concrete Protection Coatings for Concrete Conference, Coating the World of Concrete February 2, 2009, Westin Casuarina Las Vegas Hotel, Las Vegas, NV INTRODUCTION
More informationEpoxy Curing Agents and Modifiers
Epoxy Curing Agents and Modifiers Curing Agent DESCRIPTION curing agent is a highperformance modified polyamide intended for use with epoxy resins in two-part ambient cure coatings. Special features of
More informationSECTION 1045 PAINT FOR STRUCTURAL STEEL
SECTION 1045 PAINT FOR STRUCTURAL STEEL 1045.1 Paint and Paint Material. 1045.1.1 General. All single component paints shall be ready-mixed at the factory to comply with the specification formula for the
More informationRefer to Substrates & Surface Preparation.
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Dry Film Thickness Aliphatic Acrylic Polyurethane Thin film, high gloss finish with exceptional weathering performance
More informationUCECOAT Waterborne UV Resins for Field Applied Wood Floor Finishes
Waterborne UV Resins for Field Applied Wood Floor Finishes waterborne UV resins are recommended for use in field applied wood topcoats. The low viscosity of resins, obtained without the use of low molecular
More informationReactive Diluents for Achieving High Solids Acrylic Polyurethane Coatings
Reactive Diluents for Achieving High Solids Acrylic Polyurethane Coatings Christopher Letko, John Argyropoulos, Amber Stephenson Technical Contact: CSLetko@dow.com Marketing Contact: ALWatkins@dow.com
More informationNORTH AMERICA EPOXY CURING AGENTS EPOXY
NORTH AMERICA EPOXY CURING AGENTS EPOXY A ROBUST TOOLBOX TO MEET DIVERSE FORMULATION AND END-USE REQUIREMENTS With a heritage built on more than 60 continuous years in the industry, Olin is the reliable
More informationDP4101 / DP4104 / DP4107 HS PRIMER
Description 2-component High Solids primer with 2 methods of application: a. primer surfacer; b. non-sanding primer. Colour: white, medium grey and black. Composition based on a special hydroxy functional
More informationWaterborne Epoxy Curatives. High performance. Low emissions. Cost-effective.
Waterborne Epoxy Curatives High performance. Low emissions. Cost-effective. Waterborne systems: offer considerable advantages Waterborne epoxy coatings are fast becoming the first choice for concrete protection.
More informationA New Self-Crosslinking Acrylic Latex Garage Floor and Masonry Applicatio
A New Self-Crosslinking Acrylic Latex Garage Floor and Masonry Applicatio TABLE 1 New Self-Crosslinking Acrylic Latex Physical Properties PH 8 9 TOTAL SOLIDS, % 7 9 BROOKFIELD VISCOSITY
More informationZinc-free and aqueous
Zinc-free and aqueous Anticorrosive primers, free of (zinc containing) anticorrosive pigments can be formulated using aqueous, internally flexibilized 2K-epoxy dispersions Salt-spray and humidity chamber
More informationViscosity at 25 C [ mpa s ] Colour Gardner. Solids content [ % ]
Waterborne Systems for Structural Applications Weight as supplied [ g/eq ] Colour Gardner Fiber sizing thermoset matrix Fiber sizing thermoplastic matrix Heat curable binder 1 Heat curable varnish 2 Rubber
More informationCarboguard 890 PRODUCT DATA SHEET SELECTION & SPECIFICATION DATA. Generic Type. Cycloaliphatic Amine Epoxy
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Cycloaliphatic Amine Epoxy Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial
More informationAR555 Waterborne Epoxy Resin
Epoxy Curing Agents and Modifiers ANCAREZ TM AR555 Waterborne Epoxy Resin DESCRIPTION Ancarez AR555 resin is a waterborne solid epoxy resin dispersion delivered at 55% solids in water. It is designed for
More informationValspar InspireME Coil and Extrusion Product Guide Specification Section Shop-Applied Coatings for Metal
When you re looking for inspiration you have a new source. valsparinspireme.com is an online experience brimming with ideas and possibilities to fuel your creativity. Valspar InspireME Coil and Extrusion
More informationAliphatic Acrylic-Polyester Polyurethane
SELECTION & SPECIFICATION DATA Generic Type Description Features Color Finish Primer Dry Film Thickness Aliphatic Acrylic-Polyester Polyurethane High build, low sheen finish that has excellent resistance
More informationLaboratory Testing of Three Above Ground Paint Systems for Canadian Applications
Laboratory Testing of Three Above Ground Paint Systems for Canadian Applications Amal Al-Borno, Mick Brown Charter Coating Service (2000) Ltd. #6, 4604 13 th Street N.E. Calgary, AB, Canada T2E 6P1 Robert
More informationThe Best of Both Worlds!
The Best of Both Worlds! The Best of Both Worlds! A benchmark high-performance polyurethane paint that limits VOC to less than 50g/L or.4172 lbs/gal while delivering superior color and durability. High
More informationMaximum Rust Protection!
ZERO-RUST Zero Rust is a direct-to-metal, phenolic modified alkyd rust and corrosion control coating, which controls rust and corrosion by putting down an impermeable barrier at the steel level. Its dielectric
More informationEPOTUF. Epoxy Resins & Curing Agents
EPOTUF Epoxy Resins & uring Agents STRENGTHEN YOUR OATING PERFORMANE WITH EPOTUF Formulating coatings for marine, aerospace, industrial maintenance and flooring applications is a tough job made easier
More informationNCI for Industrial Applications. Restore Highly Oxidized & Colors. Extend Freshly Painted or Existing Paint by 10+ Years
NCI for Industrial Applications Restore Highly Oxidized & Colors Du Extend Freshly Painted or Existing Paint by 10+ Years Industrial Market Before After with NCI Industrial asset owners commonly apply
More informationImron 1.8 FT-C Flat Waterborne Polyurethane Clearcoat
Imron 1.8 FT-C Flat Waterborne Polyurethane Clearcoat GENERAL DESCRIPTION A flat gloss, isocyanate-free, single component, 1.8 lbs/gal VOC conforming, zero HAPs coating based on unique Axalta waterborne
More informationVE 9300 SERIES NOVOLAC VINYL ESTER
VE 9300 SERIES NOVOLAC VINYL ESTER Revised Date: 01/008 Replaces Date: 0/008 Product Description VE 9300 Series linings are formulated using proprietary Vinyl Ester resins and glass flakes. The series
More informationGRIP-GARD PLUS BRUSH / ROLL ADDITIVE
Description The GRIP-GARD PLUS Brushing/Rolling Additive is designed to convert GRIP-GARD PLUS spray paint into a coating that can be used for brush & roll application. 100 Grip Gard Plus (High Gloss)
More informationEclipse ECL-G-2 Clear High Solids Polyurethane Topcoat
Technical Data Sheet Product Group Polyurethane topcoat Characteristics Product Information ECL-G-2 is a high solids, long life clear coat formulated for use with Eclipse base coat and special effect colors
More informationProperty Test/Standard Description. semi gloss (35-70) Flash point ISO 3679 Method 1
2080;2081 1 2080 epoxy VValidationDate). 1 Product description This is a two component polyamide cured epoxy coating. It is a high solids, high build product. Designed as a mid coat in systems for new
More information10P2-3 Anti-static Conductive Flat Black Epoxy Coating
Technical Data Sheet Product Group Conductive epoxy coating Characteristics Product Information This epoxy coating is designed to produce an anti-static conductive film on fiberglass components. It can
More informationAerocron 2100 Anionic Epoxy Primer
Anionic Epoxy Primer TECHNICAL DATA SHEET Product Description is an anionic epoxy electrocoat primer technology designed to provide optimal corrosion protection over aircraft substrates. It is a chrome-free,
More informationVapor-Clear. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring
advanced moisture control, inc. The high-performance, low-cost, eco-friendly, aesthetically-pleasing alternative to high-build epoxy floors and boring 250 polished concrete slabs! Made in Southern California,
More informationStreetBondSR Specification Help
StreetBondSR Specification Help STREETBOND SR COATING PART 1 GENERAL 1.1 Description A. StreetBond coating is a highly specialised coating specifically designed for application onto asphalt pavement as
More informationtwo component high build amine adduct cured phenolic epoxy primer
5 pages Revision of January 2003 DESCRIPTION two component high build amine adduct cured phenolic epoxy primer PRINCIPAL CHARACTERISTICS primer coat in the Sigma Phenguard tank coating system excellent
More informationHVAC Antimicrobial Protected Coatings
HVAC Antimicrobial Protected Coatings Introduction to Shop Applied Coating Technology HVAC Heating, Ventilation, and Air Conditioning Then & Now Although HVAC technology is one of the most practical advantages
More information4002A21M Aluminum Lipskin Coating
Technical Data Sheet Product Group High heat coating Characteristics Product Information This specialty coating is designed for use on the leading edges of aluminum alloy nose cowl inlets. It is formulated
More informationPOWDER COATING CATALOG
POWDER COATING CATALOG Product Overview Product Name EPI PC-Cure 2C-P Chemical Description & Usage Choline Chloride Powder Latent catalyst, coats aluminum, improves mechanical resistance & is nonyellowing.
More informationCorrosion Protection for Fisher Valves
Corrosion Protection Product Bulletin Corrosion Protection for Fisher Valves Control valves operate in some of the most severely corrosive conditions imaginable. Valves used near or on the sea are constantly
More informationProperty Test/Standard Description. US EPA method 24 (tested) (CARB(SCM)2007, SCAQMD rule 1113, Hong Kong)
Approved 402;2522 1,2 2522 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a high zinc dust containing product. It conforms to
More informationNACORR Rust & Corrosion Inhibitors
King Industries provide formulators the means to impart corrosion resistance to aqueous and non-aqueous systems. NACORR can be used as the primary corrosion inhibitor or in combination with environmentally
More informationOne-coat application 5 LV650 Clear 2 LV650 Hardener 1 LV650 Reducer Anti-Graffiti (#484165)
Description Autocoat BT is a two component VOC compliant clear coat that provides excellent chemical resistance and stain repellent properties. is designed for original equipment and repairs of commercial
More informationSIGMACAP MASTIC GF. September surface tolerant coating for lower grade of steel preparation
5 pages DESCRIPTION PRINCIPAL CHARACTERISTICS COLOURS AND GLOSS BASIC DATA AT 20 C Mass density Volume solids VOC (supplied) Recommended dry film thickness Theoretical spreading rate Touch dry after Overcoating
More information64C1-2-A High Temperature Resistant Insulative Coating
Product Group Characteristics Product Information High temperature coating is formulated for use as a high temperature insulation coating for environments with continuous exposure to temperatures up to
More informationMultifunctional Protective Coatings for Weapon Systems Chemical Agent Resistant Coatings
Multifunctional Protective Coatings for Weapon Systems Chemical Agent Resistant Coatings Pauline Smith & John A. Escarsega US Army Research Laboratory Coatings and Corrosion Team 20th March 2006 JSEM Lead
More informationCorlar LV PR 178 Series Epoxy Primer
Corlar LV PR 178 Series Epoxy Primer GENERAL DESCRIPTION A two-component very low VOC corrosion-resistant epoxy primer designed to be extremely tough and durable. When properly activated, the combined
More information1.4 kg/l (11.4 lb/us gal) Maximum 295 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) 50 to 63 μm (2.0 to 2.
DESCRIPTION One-component, heat-resistant silicone acrylic topcoat primarily for the PPG HI-TEMP 1027 primer or the PPG HI-TEMP 222 G primer. PRINCIPAL CHARACTERISTICS Heat-resistant silicone acrylic topcoat
More informationDouble your sustainability. Water-based resins for industrial metal coatings
Double your sustainability Water-based resins for industrial metal coatings 2 Double your sustainability The professional protection by water-based emulsions Trends and standards in the industrial metal
More informationUnderstanding the Basics of Electrocoat. Kelly Moore Development Chemist
Understanding the Basics of Electrocoat Kelly Moore Development Chemist Overview Why and When to Use Electrocoat How Does Electrocoat Work? Selecting the Right Electrocoat Technology The Future of Electrocoat
More informationBringing coatings to life. Performance-engineered precipitated silicas
Bringing coatings to life Performance-engineered precipitated silicas Satisfying the evolving demands of the coatings industry Quality, consistency, innovation and manufacturing excellence For more than
More information1.1 This Section includes surface preparation and the application of base coats, intermediate and topcoats.
PAINTING GENERAL INFORMATION 1.1 This Section includes surface preparation and the application of base coats, intermediate and topcoats. DESIGN REQUIREMENTS 2.1 Material Compatibility: a. Provide materials
More informationRHOPLEX WL-100 Emulsion Copolymer For High-Gloss Plastic Coatings With Excellent Adhesion
RHOPLEX WL-100 Emulsion Copolymer For High-Gloss Plastic Coatings With Excellent Adhesion Description RHOPLEX WL-100 resin is an acrylic-styrene copolymer designed for high-gloss, high-doi (Distinctness
More informationApproved. Property Test/Standard Description. matt (0-35) Flash point ISO 3679 Method F (29 C) calculated VOC-US/Hong Kong
Approved 20920;16620 1 20920 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured epoxy coating. It is a fast drying, zinc phosphate pigmented, high solids, high build product.
More informationWaterpoxy waterbased epoxy system
Waterpoxy waterbased epoxy system Giorgio Sabbadini Bankok June 2004 APPLICATION POSSIBILITIES OF THE WATERBASED EPOXY SYSTEMS INDUSTRIAL AND CIVIL ENGINEERING FIELDS Reasons to switch to water based systems
More informationHEALTHCARE. High Performance Flooring Systems for Healthcare Services
HEALTHCARE High Performance Flooring Systems for Healthcare Services Healthcare sectors are some of the most demanding environments for floors and floor protection. BioMedical research, pharmaceutical,
More informationPriming and Painting Slip Critical Steel Connections. Troy Fraebel Corrosion Specification Specialist
Priming and Painting Slip Critical Steel Connections 10 May 2012 Troy Fraebel Corrosion Specification Specialist 25 years in industrial coatings SSPC Protective Coatings Specialist SSPC C-1 and C-2 Instructor
More informationNormadur 65 HS. Technical Data PROPERTIES AND RECOMMENDED USAGE TECHNICAL DATA
Technical Data Normadur 65 HS PROPERTIES AND RECOMMENDED USAGE Paint type: NORMADUR 65 HS is a fast drying, flexible polyurethane coating with an aliphatic isocyanate curing agent. NORMADUR 65 HS is high-solid
More informationBasecoat WB Technical Data Sheet 09 / 05 / 2016 L UK & Ireland Basecoats
Description One component, mixing machine water based basecoat system. Available in a wide variety of colours including metallic, pearls and solids. Specifically designed for the refinishing of passenger
More informationProperty Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method C VOC-EU EU VOC Directive 2004/42/CE (theoretical) 22 g/l
Approved 500;501;499 1,5 500 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured solvent free epoxy coating. It is transparent. It ensures very good adhesion on most concrete
More informationTested in accordance with ISO , high expected durability in corrosivity category C5-I. Property Test/Standard Description
Approved 7461;7680 1,2 7680 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a high solids, high zinc dust containing product. It
More informationEnvironmentally Friendly Anti-Corrosion Primers for Hot-Dip Galvanized (HDG) Steel
Environmentally Friendly Anti-Corrosion Primers for Hot-Dip Galvanized (HDG) Steel C. Shivane, P. Puomi and W.J. van Ooij University of Cincinnati, Dept. of Chemical and Materials Eng., Cincinnati, OH
More informationElectrically Conductive Compounds Selector Guide. Chomerics. Coatings, Adhesives, Sealants, Gap Fillers, and Greases ENGINEERING YOUR SUCCESS.
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Electrically Conductive Compounds Selector Guide Coatings, Adhesives,
More informationFrank D. Rea Director of Coatings Services / Chief Chemist
State of the Union Cleaning and Painting Steel Bridges Frank D. Rea Director of Coatings Services / Chief Chemist CURRENT PRACTICES AND MATERIALS LESSONS LEARNED THE LATEST CURRENT PRACTICES AND MATERIALS
More informationProperty Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method C VOC-EU EU VOC Directive 2004/42/CE (theoretical) 14 g/l
Approved 29980;29981;30062 1,5 29980 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured solvent free epoxy coating. It is a high performance product. It is easy to apply.
More information1.4 kg/l (11.4 lb/us gal) Maximum 272 g/kg (Directive 1999/13/EC, SED) Maximum 420 g/l (3.5 lb/gal) To 650 C (1200 F) To 538 C (1000 F)
DESCRIPTION One component heat resistant silicone topcoat for use in an elevated temperature coating system, primarily for application over PPG HI-TEMP 1027 primer PRINCIPAL CHARACTERISTICS Heat resistant
More information5 STAR XTREME AUTOBODY PRODUCTS TECHNICAL DATA INFORMATION DATED: FEBRUARY 2017 PRODUCT NUMBER DESCRIPTION #5180 ORIGINAL KLEARKOTE 2.
5 STAR XTREME AUTOBODY PRODUCTS TECHNICAL DATA INFORMATION DATED: FEBRUARY 2017 PRODUCT NUMBER DESCRIPTION #5180 ORIGINAL KLEARKOTE 2.1 VOC PRODUCT DESCRIPTION 5180 is a medium solids two component polyurethane
More information3 Automotive Structural Adhesives Two-Part Induction-Cure Epoxy Adhesive 5045
3 Automotive Structural Adhesives Two-Part Induction-Cure Epoxy Adhesive 5045 Data Sheet January 2002 Supersedes data sheet dated January 1995 General 3M Automotive Two-Part Induction-Cure Adhesive is
More informationPRODUCT DATA SHEETS CUSTOM COATINGS FORMULATED TO MATCH YOUR NEEDS USCOATINGS.COM // St. Louis, Missouri
PRODUCT DATA SHEETS CUSTOM COATINGS FORMULATED TO MATCH YOUR NEEDS USCOATINGS.COM 314.205.1500 // St. Louis, Missouri 2 ABOUT U.S. COATINGS We offer a range of solutions designed to fit the needs of our
More informationApproved. Property Test/Standard Description. gloss (70-85) Flash point ISO 3679 Method C VOC-US/Hong Kong. US EPA method 24 (tested)
Approved 25760;26000 1,5 25760 epoxy ^(ValidationDate) 1 Product description This is a two component amine cured solvent free epoxy coating. It is a high performance product. It is a self smoothing, easy
More informationInstruction Guide APPLICATION OF CIM TO CONCRETE
23 Elm St., Peterborough, NH 03458 Tel: (800) 543-3458 (603) 924-9481 Fax: (603) 924-9482 Web site: Instruction Guide APPLICATION OF CIM TO CONCRETE 1.0 DESCRIPTION This guide covers the installation of
More information3 Scotch-Weld TM. Epoxy Adhesive 2158 B/A. Technical Data December, 2009
3 Scotch-Weld TM Technical Data December, 2009 Product Description 3M Scotch-Weld is a gray, two-part, high strength adhesive that chemically cures at room temperature. It has good adhesion to a variety
More informationMix ratio (by volume): (base component) (activator component) (thinner component)
TECHNICAL DATA SHEET Product Description DeSoto High Temperature urethane primer is a heat resistant coating that can withstand an operating temperature of 232 C (450 F). is used over aluminum and composite
More informationPre-qualification testing in accordance with NORSOK M-501, Rev. 5, System 1, suitable for exterior exposure in offshore environment, below 120 C.
Approved 402;2521 1,2 2521 zinc epoxy ^(ValidationDate) 1 Product description This is a two component polyamide cured zinc rich epoxy coating. It is a very high zinc dust containing product. It conforms
More informationSpecialty Epoxy building blocks for demanding coating, adhesive applications.
Specialty Epoxy building blocks for demanding coating, adhesive applications. Presenter: Hitesh Soni. PhD Product Manager- Epoxies. CVC Thermoset Specialties, Inc., Latin America Coating show. June 30-
More informationTechnical Data Sheet S Topcoats LV 351 TOPCOAT MM/RM FOR PROFESSIONAL USE ONLY
100 Topcoat 40 Hardener 30 Reducer Description: High gloss, state of the art 2K High Solids polyurethane topcoat. The target use for this product is refinishing and refurbish of existing vehicles and the
More informationNew Basonat Polyisocyanate for Faster Handling. Dr. A. Steinbrecher, BASF SE, Ludwigshafen
New Polyisocyanate for Faster Handling Dr. A. Steinbrecher, BASF SE, Ludwigshafen BASF polyisocyanates for 2k waterborne coatings 2k waterborne coating Polyol + = Polyisocyanate A-Component Crosslinker
More informationFormulating High-Performance Waterborne Epoxy Coatings
White Paper Formulating High-Performance Waterborne Epoxy Coatings Authors: Michael J. Watkins Daniel J. Weinmann Jim D. Elmore Presented at a meeting of the Thermoset Resin Formulators Association at
More informationERC5 Erosion Resisting Polyurethane Coating
TECHNICAL DATA SHEET Product Description Components is a two pack, polyurethane erosion resisting coating developed for the protection of strike areas and leading edges of aircraft. When applied over the
More informationTable 2: Salt fog exposure testing Epoxy Salt fog exposure
ALUMINUM PHOSPHATE TECHNOLOGY ANTI-CORROSION APPLICATION DESCRIPTION Worldwide, the direct cost of corrosion is estimated to be more than $1.8T, which amounts to 3-4% of the GDP of industrialized countries.
More informationSection COATING RESTORATION
Sto Corp. 3800 Camp Creek Parkway Building 1400, Suite 120 Atlanta, GA 30331 Tel: 404-346-3666 Toll Free: 1-800-221-2397 Fax: 404-346-3119 www.stocorp.com 80658R StoColor Texture - Coarse Textured Acrylic-Based,
More informationA-4300 Clear Silicone Aliphatic Polyurea Technical Data Sheet
A-4300 Clear Silicone Aliphatic Polyurea Technical Data Sheet PRODUCT DESCRIPTION: A-4300 Clear Silicone Aliphatic Polyurea is a two component 100% solids, no VOC s, silicone aliphatic polyurea that was
More informationSikadur -330 is a two part, thixotropic epoxy based impregnating resin / adhesive.
Product Data Sheet Edition 21/02/2012 Identification no: 02 04 01 04 001 0 000004 2-part epoxy impregnation resin Construction Product Description is a two part, thixotropic epoxy based impregnating resin
More informationProperty Test/Standard Description
Approved 29560;29561 1 29560 zinc silicate ^(ValidationDate) 1 Product description This is a two component ceramically reinforced polyamide cured zinc rich epoxy coating. 1:1 mixing ratio for easy use
More informationInstallation Instructions
Installation Instructions I. GENERAL INFORMATION KEY CHIP-100 FLOORING is a decorative resin flooring system consisting of clear, 100% solids epoxy resin and colored vinyl chips. KEY CHIP-100 FLOORING
More informationNumber: 075K0013. Machined surfaces of incoming components must be masked before coating, unless otherwise directed by Engineering.
Number: Name: Organic Coating Performance Requirements for DDC, HDEP, MBE, and MTUDD Components and Engines. Source: MATERIALS ENGINEERING, Jeremy Dean Latest Revision Date: 04/01/2007 Previous Revision
More informationCaprolactone chemistry
Caprolactone chemistry Tailor-made polymerization by: Ring-opening polymerization Initiator H-functionality to react with f.x. NC or melamine crosslinkers General properties Very low acid number (
More informationEpoxy Curing Agents and Modifiers
Epoxy Curing Agents and Modifiers Ancamine 2739 Curing Agent Technical Datasheet DESCRIPTION Ancamine 2739 is a modified polyamine intended for use as a for diluted liquid epoxy resin at ambient and low
More informationDevelopments in Waterborne Thermal Insulation Coatings By Sudhir Achar and Leo J. Procopio, The Dow Chemical Company
Reprint from the March 2013 Issue Volume 30, Number 3 The inadvertent transfer of thermal energy in the form of heat leads to a variety of issues in industrial settings. Issues include heat loss from processing
More informationFinal Report on Alternative Chromate-Free Wash Primers
Final Report on Alternative Chromate-Free Wash Primers by Pauline Smith, Kestutis Chesonis, Christopher Miller, and John Escarsega ARL-TR-3932 September 2006 Approved for public release; distribution is
More information4970 PRIME COAT FZ Two components zinc phosphate epoxy product
Converter name Destination Extremely versatile use: industrial vehicles, agricultural machines, different metal surfaces, (trussing, external pipes). Contains zinc phosphate as anticorrosive pigment. Doesn
More information