Supplement. by WING SIEN FONG. October A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE MENLO PARK, CALIFORNIA
|
|
- Justin Simpson
- 6 years ago
- Views:
Transcription
1 Report No. 51A REINFORCED PLASTICS Supplement A by WING SIEN FONG October 1973 A private report by the PROCESS ECONOMICS PROGRAM STANFORD RESEARCH INSTITUTE I I MENLO PARK, CALIFORNIA
2 CONTENTS 1 INTRODUCTION SUMMARY INDUSTRY STATUS... 9 Reinforced Plastics in the United States... 9 Reinforced Thermosets CRTS)... 9 Reinforced Thermoplastics (RTP) Transportation Market Building Market Pipe Market Reinforced Plastics in Australia Reinforced Plastics in Brazil Reinforced Plastics in Canada Reinforced Plastics in Japan Reinforced Plastics in Mexico Reinforced Plastics in the Soviet Union Reinforced Plastics in Western Europe Austria Belgium England France Germmy (West) Italy Netherlands Portugal Scandinavia (Sweden, Norway, Denmark, and Finland) Spain Switzerland REINFORCED THERMOSETS Resins Low Shrink, Low-Profile Resins and Unsaturated Polyesters Epoxy Resins Vinyl Ester Resins Polyvinyl Chloride Thermosets High Temperature Resistant Polymers V
3 CONTENTS 4 Continued Properties... Fire Retardance... Mechanical Properties... Weatherability... Chemical Resistance... Processes... Matched Metal Die Molding... Cold Molding and Comoform@... Injection Molding,,,.,.,,,,.,,,,.,,.. Pultrusion... Filament Winding... Centrifugal and Rotational Casting... Lamination (of boards, panels, and sheets)... Lay-ups and Other Processes... 5 REINFORCED THERMIPLASTICS... Composition and Properties... Polyaoetals... Polyamides... Polycarbonates... Polyesters (Thermoplastics)... Polyethylene and Polypropylene... Polyphenylene Oxides... Styrene Polymers... Polyvinyl Chloride... Processes... Extrusion and Injection Molding... Cold Forming and Stamping... In-Situ Polymerization... Miscellaneous Processes... Glass Fiber-Reinforced Thermoplastic Concentrates..,. Compounding and Blending of Glass Fibers and Thermoplastics... 6 REINFORCEMENTS... Glass... Carbon and Graphite Fiber... Other Reinforcements vi
4 7 SHEET AND BULK MOLDING COMPOUNDS Introduction Compositions 151 Review of Proc&ei Process Description Process Discussion Cost Estimates REINFORCED PLASTIC FOAMS Introduction Reinforced Thermoplastic Foams Reinforced Polyurethane Foams Review of Processes Reinforced Thermoplastic Foams Reinforced Polyurethane Foams Process Description Process Discussion Cost Estimates APPENDIX DESIGN AND COST BASIS , CITED REFERENCES...,., PATENTREFERENCES BYCOME'ANY Vii
5 ILLUSTRATIONS 4.1 A Total System for Injection Molding of Glass- Reinforced Unsaturated Polyesters Sheet Molding Compound Production Sheet Molding Compound Production Effect of Operating Level and Number of Operators on Production Cost Sheet Molding Compound Production Effect of SMC Machine Belt Speed on Production Cost Sheet Molding Compound Production Effect of Operating Level and Plant Capacity on Production Manufacture of Glass FibepReinforced Polyurethane Foams Manufacture of Glass Fiber-Reinforced Polyurethane Foams Effect of Labor Related Cost on Production Cost a.3 Manufacture of Glass Fiber-Reinforced Polyurethane Foams Effect of Operating Level and Plant Capacity on Production Cost
6 TABLES Consumption of Reinforced Plastics in the United States, Japan, and Western Europe The Production of Sheet Molding Compounds and Fiber-Reinforced Polyurethane Foams Cost Estimates Consumption Pattern of Reinforced Plastics in the United States Consumption Pattern of Reinforced Thermosets in the United States Producers of Sheet and Bulk Molding Compounds in the United States Consumption Pattern of Gel Coats in the United States Consumption of Reinforced Thermoplastics in the United States Some Merchant Producers of Reinforced Thermoplastics in the United States Reinforced Plastics Consumption in Transportation Some Reinforced Plastics Applications in 1971 Automobiles Consumption of Reinforced Plastics in Japan Consumption Patterns of Reinforced Plastics in Japan Some Reinforced Thermoplastics Producers in Japan Some Reinforced Plastics Licensings in Japan Consumption Pattern of Reinforced Plastics in Western Europe ,.. 36 Consumption of Sheet Molding Compounds in Western Europe ,.. 37 Some Merchant Producers of Reinforced Thermoplastics in Western Europe Including England Production of Reinforced Plastics in Scandinavian Countries Xi
7 TABLES 4.1 Reinforced Unsaturated Polyesters Some Recent Patents.,.,.,......,.., Reinforced Epoxy Resins Some Recent Patents,.....,., High Temperature Resistant Reinforced Plastics Some Recent Patents......, Pultrusion Process Some Recent Patents..., , Filament Wound Pipes and Tubes Some Recent Process Patents..., Reinforced Thermoset Panels, Sheets, and Boards Some Recent Process Patents, ,..... Lay-ups, Vacuum Bag, and Other Processes Some Recent Patents..., ,... Miscellaneous Reinforced Thermoplastic Compositions Some Recent Patents , Reinforced (Thermoplastic) Polyesters Some Recent Patents..,,..,.....,......, 5.3 Reinforced Polyolefins Some Recent Patents , Reinforced Styrene Polymers Some Recent Patents..,.....,,......, Reinforced Polyvinyl Chloride Some Recent Patents , Extrusion and Injection Molding of Reinforced Thermoplastics Some Recent Patents ,......, In-Situ Polymerization Processes for Reinforced Thermoplastic Preparation Some Recent Patents , Miscellaneous Processes for Reinforced Thermoplastics Some Recent Patents Xii
8 TABLES Production of Cylindrically Shaped Reinforced Thermoplastics Some Recent Patents...,.,...,.., Reinforced Thermoplastic Sheet Materials Some Recent Patents.....,.,., ,. Applications of Some Silane Coupling Agents Coupling Agents and Other Treatments for Glass Fibers Used for Reinforced Thermoplastics Some Recent Patents.,...,......, Coupling Agents and Other Treatments for Glass Fibers Used for Reinforced Thermosets Some Recent Patents...,.....,...., Some Patents on the Preparation of Carbon Fibrous Reinforcements.,.,..., Synthetic Fibers for Reinforced Plastics Some Recent Patents..., Sheet and Bulk Molding Compounds Some Recent Composition Patents.,....,., Sheet Molding Compound Production Major Process Equipment and Utilities Summary....,. Sheet Molding Compound Production Total Capital Investment Sheet Molding Compound Production Total Operating Costs Reinforced Thermoplastic Foams Some Recent Process Patents , Reinforced Polyurethane Foams Some Recent Process Patents....., ,. 181 Manufacture of Glass Fiber-Reinforced Polyurethane Foams Major Process Equipment and Utilities Summary Manufacture of Glass Fiber-Reinforced Polyurethane Foams Total Capital Investment , Xiii
9 TABLES 8.5 Manufacture of Glass Fiber-Reinforced Polyurethane Foams Total Operating Costs,,.,,,.,,,,,.,..., Manufacture of Glass Fiber-Reinforced Foams Effect of Number of Production Shift and Plant Capacity or Production Cost,...,.,., xiv
Military Specifications
Military Specifications *MIL-P-77 *MIL-P-78A MIL-P-79C MIL-W-80C MIL-I-631D MIL-I-742C Cast Polyester or Diallylpthlalate Sheet and Rod Engraving Stock Rigid Laminated Sheet Thermoset Rod & Tube, Melamine
More informationRESINS FOR COMPOSITES
THERMOSET RESINS FOR COMPOSITES HELIOS RESINS FOR COMPOSITES OFFER FLEXIBLE HIGH-QUALITY RELIABLE COMPOSITE SOLUTIONS. RESINS SUPPLIER SINCE 18 Composite resins since 1964 GOLDEN RESINS DEVELOPED BY ADVANCED
More informationPROPERTIES, REQUIREMENTS,
PLASTICS IN MEDICAL DEVICES PROPERTIES, REQUIREMENTS, AND APPLICATIONS Vinny R. Sastri ELSEVIER Amsterdam Boston Heidelberg London New York Oxford Paris San Diego San Francisco Singapore Sydney Tokyo William
More informationGrowth Opportunities in the Global Composites Market
Growth Opportunities in the Global Composites Market Published: May 2016 Trends, opportunities and forecast in this market to 2021 by fiber type (fiberglass, carbon fiber, aramid fiber), resin type (thermoplastic,
More informationPROCESS ECONOMICS PROGRAM
PROCESS ECONOMICS PROGRAM SRI INTERNATIONAL Abstract Process Economics Program Report No. 199 PLASTICS RECLAMATION AND RECYCLING Menlo Park, California 94025 (January 1992) In the rapidly growing business
More informationAn extensive range of non-halogenated flame retardants
An extensive range of non-halogenated flame retardants Exolit Overview Under the tradename Exolit Clariant offers a distinctive range of non-halogenated flame retardants solutions providing more environmentally
More informationPlastics the Facts An analysis of European plastics production, demand and waste data
Plastics the Facts 2017 An analysis of European plastics production, demand and waste data Plastics the Facts is an analysis of the data related to the production, demand and waste management of plastic
More informationIN-SITU-PULTRUSION STRUCTURAL THERMOPLASTIC FRP-PARTS
IN-SITU-PULTRUSION STRUCTURAL THERMOPLASTIC FRP-PARTS Stefan Epple, Institut für Kunststofftechnik, University of Stuttgart, Germany Christian Bonten, Institut für Kunststofftechnik, University of Stuttgart,
More informationICS ; Supersedes CEN/TS 14541:2007. English Version
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 14541 May 2013 ICS 23.040.20; 23.040.45 Supersedes CEN/TS 14541:2007 English Version Plastics pipes and fittings - Characteristics
More informationأت ارش. Dr. Abdel-Wahab El-Morsy Faculty of Engineering - Rabigh
Basic Workshop 1 أت ارش There are thousands of materials available for use in engineering applications. Most materials fall into one of three classes that are based on the atomic bonding forces of a particular
More informationStress-Strain Behavior
15-1 CHAPTER 15 CHARACTERISTICS, APPLICATIONS, AND PROCESSING OF POLYMERS PROBLEM SOLUTIONS Stress-Strain Behavior which is 15.1 From Figure 15.3, the elastic modulus is the slope in the elastic linear
More informationCOMPOSITE MATERIALS 10. COMPOSITE MATERIALS 10.1 INTRODUCTION
MODULE FIVE COMPOSITE MATERIALS 10. COMPOSITE MATERIALS Introduction Classification of composites Types of matrix materials and reinforcements Production of FRP s and MMC s Advantages and applications
More informationASME B31.3 Process Piping
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. Nonmetallic Piping - 1 Piping Development Process 1. Establish applicable system standard(s)
More informationPolyurethanes for roller coating ROLLERS
Polyurethanes for roller coating ROLLERS Introduction Dow Formulated Systems, a global business unit of The Dow Chemical Company (Dow), is an industry leader in the development and formulation of fully-formulated
More informationContents. 1. Introduction to Materials Processing Starting Materials 21. Acknowledgements
Preface Acknowledgements xiii xv 1. Introduction to Materials Processing 1 1.1 Materials Processing: Definition and Scope 1 1.2 Three Approaches to Materials Processing 4 1.3 Materials Processing Steps
More informationA Mr BTec Book. Plastics
A Mr BTec Book Plastics 3 Plastics 25 recycled bottles are enough to make one pupil blazer. Anon What are Plastics? Plastics are the most widely used material in commercial production. Plastics can be
More informationRULE POLYESTER RESIN OPERATIONS (Adopted & Effective 5/11/16)
RULE 67.12.1 POLYESTER RESIN OPERATIONS (Adopted & Effective 5/11/16) (a) APPLICABILITY (1) Except as otherwise provided in Section (b), this rule is applicable to all polyester resin operations, including
More informationSUMMARY. 1 Large household appliances. 2 Small household appliances. 3 Informatics and Telecommunication (IT) equipment. 4 Consuming products
SUMMARY This technical report presents analytical data and information related to: The characteristics of the Waste Electrical and Electronic Equipment WEEE (composition, hazardous substances/materials,
More informationChapter 19. Forming and Shaping Plastics and Composite Materials
Chapter 19 Forming and Shaping Plastics and Composite Materials Characteristics of Forming and Shaping Processes for Plastics and Composite Materials Forming and Shaping Processes for Plastics, Elastomers,
More informationProduct Catalog # Description List Price (JPY) Primer Assays (desalted)
Assays and Controls Primer Assay Pricing Primer Assays (desalted) 10025636 Primer assay desalted, 200 reactions 16,000 (Wet-lab validated human, mouse, and rat) 10025637 Primer assay desalted, 1,000 reactions
More informationzahnrad_neu_gb :46 Uhr Seite 1 Gear Pumps
Gear Pumps Kreyenborg Gear Pumps - An Addition to our Range The best guarantee for continuous and economic machine performance is a closed loop system with well-matched units. The Kreyenborg system, right
More informationDERAKANE MOMENTUM Epoxy Vinyl Ester Resin
Document 2067 V1 F2, Language EN V1, Approved 2009-5-5, 2009 Ashland Inc. Page 1 (5) DERAKANE MOMENTUM 470-300 resin is a novolac-based vinyl ester designed to provide exceptional mechanical properties
More informationMold Design Guide. Geon Vinyl Molding Compounds
Mold Design Guide Geon Vinyl Molding Compounds Mold Design Guide For Geon Vinyl Rigid Molding Compounds Table of Contents INTRODUCTION....................................................2 MATERIAL SELECTION.............................................3
More informationD.E.R. 330 Liquid Epoxy Resin
Product Information D.E.R. 330 Liquid Epoxy Resin Description D.E.R. 330 Liquid Epoxy Resin is a reaction product of epichlorohydrin and bisphenol A. Introduction Typical Applications Typical Properties
More informationINTRODUCTION. Table 1. Typical applications for LDPE and Ateva EVA copolymers. Category Typical Applications Advantages
INTRODUCTION Low-density polyethylene is produced through the polymerization of ethylene by a high-pressure process. Ateva EVA copolymers are produced but copolymerizing ethylene (E) with vinyl acetate
More informationExolit Flame Retardants for Plastics
Pigments & Additives Division Specialties Business Exolit Flame Retardants for Plastics > The Business Unit Plastic Industries offers an extensive range of flame retardants for thermoplastic and thermoset
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD INTERNATIONAL ORGANIZATION FOR STANDARDIZATION l MEXAYHAPOAHAJI OPI-AHM3AUMX I-IO CTAHAAPTM3AUMM.ORGANISATION INTERNATIONALE DE NORMALISATION Plastics - PVC resins - Determination
More informationReinforced Plastic Components
1 Reinforced Plastic Components Reinforced-plastic components for a Honda motorcycle. The parts shown are front and rear forks, a rear swing arm, a wheel, and brake disks. 2 Processing Reinforced Plastics
More informationTERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE
TERPOLYMER ETHYLENE VINYL ACETATE MALEIC ANHYDRIDE Hot Melt Formulation To optimise cost/performance, OREVAC Terpolymers are combined with EVATANE. Adhesion tests have been performed in a classical Hot
More informationPultrusion technology. - current and future potential for industrial applications
Pultrusion technology - current and future potential for industrial applications Page 1 Content Röchling Group: short introduction Divisions and locations markets, materials and production processes Pultrusion
More informationServing Industry Since 1921 PRECISION FABRICATION OF PLASTIC PARTS
Serving Industry Since 1921 PRECISION FABRICATION OF PLASTIC PARTS 2 Franklin s Solution People Care About Your Business Since 1921 businesses worldwide have depended on Franklin Fibre- Lamitex Corporation
More informationTHE ROLE OF RECYCLED CARBON FIBRES IN COST EFFECTIVE LIGHTWEIGHT STRUCTURES
THE ROLE OF RECYCLED CARBON FIBRES IN COST EFFECTIVE LIGHTWEIGHT STRUCTURES Frazer Barnes ELG Carbon Fibre Ltd Abstract Recent years have seen the development of commercial operations for the recovery
More informationNews Release. BASF at the JEC in Paris: Competence in Composites
News Release BASF at the JEC in Paris: Competence in Composites Automotive lightweighting: Polyurethane in the BMW i3 and reactive polyamide materials development Wind power: New materials for various
More informationThe Role of Recycled Carbon Fibres in Cost Effective Lightweight Structures. SPE Automotive Composites Conference & Exhibition Novi, 2016
The Role of Recycled Carbon Fibres in Cost Effective Lightweight Structures SPE Automotive Composites Conference & Exhibition Novi, 2016 Overview of ELG Carbon Fibre Established in 2011 when ELG Haniel
More information- An alternate for low styrene content (HAP) is available as DERAKANE resin.
Document 1228 V5 F2, Language EN V1, Approved 2015-9-16, 2016 Ashland Inc. Page 1 (5) DERAKANE 411-350 epoxy vinyl ester resin is based on bisphenol-a epoxy resin and has become the "industry standard"
More informationEnd of Life Recovery Options
Plastic Acetal (POM) Glides (Brooks) Recycled POM Acrylonitrile Butadiene Styrene (ABS) High Density Polyethylene (HDPE) Low Density Polyethylene (LDPE, LLDPE) Amr Caps, Leg Cap Glide, Spacers (Insight
More informationViscosity, Brookfield # 2 30 rpm 425 mpas (cps) Percent Solids 57 % Color <5 Gardner Specific Gravity 1.16 gm/cc
Document 2907 V5 F2, Language EN V1, Approved 2015-9-16, 2016 Ashland Inc. Page 1 (5) DERAKANE 510 B-400 Epoxy Vinyl Ester Resin is a low viscosity, unpromoted, flame retardant (1) epoxy vinyl ester. This
More informationDYWIDAG Cable Bolts for Mining
DYWIDAG Cable Bolts for Mining 2 Contents Introduction... 3 Fields of Application... 4 Main Advantages... 4 System Description... 4 System Components... 5 Specifications... 5 Installation Procedure...
More informationPolymers - Macromolecules. Proteins polyamides, enzymes, muscles, tissue, Hair, wool, silk. Nucleic Acids - DNA, RNA
SCM-503/703: Structure & Properties of Polymeric Materials 603-1.1 Natural Polymers Synthetic Polymers Polymers - Macromolecules Proteins polyamides, enzymes, muscles, tissue, air, wool, silk Carbohydrates
More informationRheological Effect of Zinc Surfactant on the TESPT-Silica Mixture in NR and S-SBR Compounds. Compression molding
Index Volume XVII (Bold numbers refer to original contribution) Subject Index A Acrylic fibers see Fibers Acrylonitrile butadiene styrene copolymer BASF buys Styrene Unit... 287 LG Chem Announces Plan
More informationInternational Indexes of Consumer Prices,
International Indexes of Consumer Prices, July International Labor Comparisons Table of Contents Highlights... 1 Monthly Charts.. Monthly Tables... Annual Charts..... 5 Annual Tables.. 7 Technical Notes..
More informationDATA SHEET HK900 BAGGING FILM
HK900 BAGGING FILM HAWKEYE HK900 BAGGING FILM is a cast nylon, heat-stabilized film. This film has a melt point of 510 degrees F (265 degrees C) for increased stability in higher temperature applications
More informationCompósitos em SMC- Sheet Molding Compound : Estrutura, propriedades e Aplicações Palestrante: Everton Sterzo
Painel Aeroespacial -2017 Compósitos em SMC- Sheet Molding Compound : Estrutura, propriedades e Aplicações Palestrante: Everton Sterzo A.Schulman Inc. in the World A. Schulman operate facilities in the
More informationSUCCESS ROOTED IN PARTNERSHIP TM
SUCCESS ROOTED IN PARTNERSHIP TM SALES & DISTRIBUTION FLAME RETARDANT SOLUTIONS PHLAMOON EXTINITY Powders & Liquids Concentrates & Masterbatches Customized Solutions AESSE Sales & Distribution Your Success
More informationJoining & Bonding of Composite Parts The Structural Adhesive Advantage
Joining & Bonding of Composite Parts The Structural Adhesive Advantage Recent trends and advancements in the manufacturing and cost reduction of composite materials has increased their usage in the transportation,
More informationPOLYLITE TLP Series Low-Profile, Low-Styrene Marine Laminating Resins
August 2012 Low-Profile, Low-Styrene Marine Laminating Resins DESCRIPTION of resins are pre-promoted(*), thixotropic (*), low-profile, unsaturated polyester resins developed for fabricating small to large
More informationJONCRYL ADR POLYMERIC CHAIN EXTENDER FOR CONDENSATION THERMOPLASTICS General Information. Key Features & Benefits
JONCRYL Key Features & Benefits Increased IV and Mw of polyesters Upgrades recycled PET and PA Upgrades quality of PET and polyesters Enhanced hydrolytic stability of PET, PC POLYMERIC CHAIN EXTENDER FOR
More informationTechnical Datasheet Ashland Performance Materials
Document 2161 V2 F2, Language EN V1, Approved 2008-12-29, 2011 Ashland Inc. Page 1 (8) HETRON FR992 resin is a low viscosity, unpromoted, flame retardant (1) patented epoxy vinyl ester with F-Cat technology.
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11357-6 Second edition 2008-06-15 Corrected version 2008-11-15 Plastics Differential scanning calorimetry (DSC) Part 6: Determination of oxidation induction time (isothermal
More informationFor the purpose of this rule, the following definitions shall apply: 3.1 APCO: as defined in Rule 1020 (Definitions).
RULE 4682 POLYSTYRENE, POLYETHYLENE, AND POLYPROPYLENE PRODUCTS MANUFACTURING (Adopted May 21, 1992; Amended December 17, 1992; Amended June 16, 1994; Amended September 20, 2007; Amended December 15, 2011)
More informationKreysler & Associates Page 1
Page 1 Architectural Composites 1. General notes 2. Mechanical Properties 3. Advantages/Disadvantages 4. Production 5. Form and Finish 6. Fire Performance 7. Durability 8. Color Stability 9. Environmental
More informationArgus Ethylene Annual 2017
Argus Ethylene Annual 2017 Market Reporting Petrochemicals illuminating the markets Consulting Events Argus Ethylene Annual 2017 Summary Progress to the next peak of the economic cycle, now expected by
More informationHigh Barrier Carrier Release Films For Thermoset Reinforced Plastics
Introduction to Thermoset Fiber Reinforced Plastic Composites Thermoset fiber reinforced plastic (FRP) compounds are formulated to exhibit tight dimensional control, toughness, high strength to weight
More informationPackaging Technology
The Essential Seminar Fundamentals of Packaging Technology Seminar Fundamentals of Packaging Technology is divided into semesters to give you maximum flexibility in taking the seminar. 1. Take the entire
More informationTin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry
Tin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry Creating value for customer and consumer At SONGWON, we are passionate about people. Our committed teams work together with customers
More informationTin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry
Tin, PVC Stabilizers and Polymers (TPP) It s all about the chemistry Creating value for customer and consumer At SONGWON, we are passionate about people. Our committed teams work together with customers
More informationGlobal Energy Production & Use 101
Global Energy Production & Use 101 Jean-Sébastien Rioux The School of Public Policy SPP-HEI Summer School on the Geopolitics of Energy & Natural Resources Calgary, AB May 15-20, 2017 Presentation highlights
More informationGlobal Engagement on Nano EHS: Role of the OECD in International Governance
Global Engagement on Nano EHS: Role of the OECD in International Governance Jeff Morris National Program Director for Nanotechnology www.epa.gov/nanoscience Amherst, MA 24 September 2010 State of Play:
More informationTechnical Datasheet Ashland Performance Materials
Document 1701 V3 F2, Language EN V1, Approved 2011-6-29, 2011 Ashland Inc. Page 1 (5) DERAKANE MOMENTUM 411-350 epoxy vinyl ester resin is based on bisphenol-a epoxy resin and provides resistance to a
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13229 First edition 2010-03-15 Thermoplastics piping systems for non-pressure applications Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings Determination of the
More informationPE/PP/PET /PS/PVC/PPCP/PPR
Let Us Introduce Gulf Advanced Polymers LLC was established in 2016 with the aim to become one stop source for all kind of polymer requirements. We are engaged in the distribution and trading of Plastic
More informationASTM Standards with Products on BuildSite
with on.org Active A36 Standard Specification for Carbon Structural Steel A36/A36M-05 A82 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement A82/A82M-05a site says A36/A36M-03a has
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 16354 December 2013 ICS 97.150 English Version Laminate floor coverings - Underlays - Specification, requirements and test
More informationComposites Processing
Composites Processing Fabrication Methods Wet Layup Prepreg Layup Filament Winding Fiber placement/fiber steering RTM/VaRTM Press Molding Pultrusion Wet Layup Fabric plies are wetted out and then placed
More informationISO INTERNATIONAL STANDARD. Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
INTERNATIONAL STANDARD ISO 4126-2 First edition 2003-01-15 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices Dispositifs de sécurité pour protection contre les
More informationGLOBAL COALITION FOR GOOD WATER GOVERNANCE
GLOBAL COALITION FOR GOOD WATER GOVERNANCE Launched at the 2016 World Water Week in Stockholm, Sweden The OECD Principles on Water Governance On 4 June 2015, the OECD Principles on Water Governance were
More informationAmerican Architectural Manufacturers Association VOLUME 1 - WINDOWS AND DOORS
VOLUME 1 - WINDOWS AND DOORS Window and Door Selection Guide PART 1 WINDOW SELECTION GUIDE WSG-11 PART 2 - PERFORMANCE SPECIFICATIONS Voluntary Specifications for Aluminum, Vinyl (PVC) and Wood Windows
More informationTable of Contents. Robert A. Malloy. Plastic Part Design for Injection Molding. An Introduction ISBN:
Table of Contents Robert A. Malloy Plastic Part Design for Injection Molding An Introduction ISBN: 978-3-446-40468-7 For further information and order see http://www.hanser.de/978-3-446-40468-7 or contact
More informationAbstract Process Economics Program Report No. 88A ALKYLATION FOR MOTOR FUELS (February 1993)
Abstract Process Economics Program Report No. 88A ALKYLATION FOR MOTOR FUELS (February 1993) Alkylation has become an important refinery process because of increasing demand for high octane and low vapor
More informationCoathylene Polymer Powders
Enhanced processing efficiency of Glass fiber reinforced plastics Improved dimensional stability Improved surface finish and appearance Anti-Shrink additive for low profile Coathylene fine powders are
More informationKeywords: Asparagus officinalis L., green asparagus, white asparagus, consumption, export, domestic, hemispheres, canned, fresh, frozen
2005 UPDATE OF THE WORLD S ASPARAGUS PRODUCTION AREAS, SPEAR UTILIZATION, YIELDS AND PRODUCTION PERIODS (To be published in the Proceedings of the XI International Asparagus Symposium in Acta Horticulturae)
More informationThe Innovation Union Scoreboard: Monitoring the innovation performance of the 27 EU Member States
MEMO/12/74 Brussels, 7 February 2012 The Innovation Union Scoreboard: Monitoring the innovation performance of the 27 EU Member States This MEMO provides an overview of the research and innovation performance
More informationThe Use of ETHANOX and ETHAPHOS Antioxidants in FDA Regulated Applications
The Use of ETHANOX and ETHAPHOS Antioxidants in FDA Regulated Applications TABLE OF CONTENTS The Use of ETHANOX AND ETHAPHOS Antioxidants in FDA Regulated Applications... 1 Part 175 - Indirect Food Additives:
More informationEpoxide equivalent weight ASTM D 1652 g/eq C (77 F), Brookfield ASTM D 2196 cp or mpa.s 650
Starting Formulation EPON FlameX Resin 9600 / EPIKURE FlameX Curing Agent 9700 Epoxy Resin System for Infusion and RTM EPON FlameX Resin 9600 / EPIKURE FlameX Curing Agent 9700 Introduction EPON FlameX
More informationProduct Information. Polyester Felt Cured-In-Place Pipe (CIPP) Lining Tube
1468 West Hospital Road Paoli, Indiana 47454 Phone: (812) 723-0244 Fax: (812) 723-0405 Polyester Felt Cured-In-Place Pipe (CIPP) Lining Tube Revised November 16, 2016 Company Profile Product Types Resins
More informationSURFACE PROFILE AND SURFACING VEIL: REDUCING PRINTOUT WITH A RESIN-RICH SURFACE
SURFACE PROFILE AND SURFACING VEIL: REDUCING PRINTOUT WITH A RESIN-RICH SURFACE Jon Jacobson Schmelzer Industries, Inc. ABSTRACT Printout on the surface of an FRP laminate has one primary source: resin
More informationHow properties of thermoplastics are affected by processing.
How properties of thermoplastics are affected by processing. Nick Barron Global Industry Manager Oil & Gas, Röchling nbarron@sustaplast.de 2nd June 2016 Material processing and its effects - NKF 1 Presentation
More informationAdvanced Composite Materials for transport sector. the contribution of IMAST
Advanced Composite Materials for transport sector the contribution of IMAST IMAST: the consortium PUBLIC INSTITUTIONS National Council of Research Italian National Agency for New Technologies, Energy and
More informationHEALTH WEALTH CAREER ROTATOR ASSIGNMENTS: TRENDS, CHALLENGES, AND OPPORTUNITIES FOR ENERGY, ENGINEERING & CONSTRUCTION, AND MINING
HEALTH WEALTH CAREER ROTATOR ASSIGNMENTS: TRENDS, CHALLENGES, AND OPPORTUNITIES FOR ENERGY, ENGINEERING & CONSTRUCTION, AND MINING Changing demographics, security issues, government restrictions, talent
More informationImaging and Electrophoresis. Gel Doc EZ Imager. Accelerate your research. Push-button imaging in just 10 seconds.
Imaging and Electrophoresis Gel Doc EZ Imager Accelerate your research. Push-button imaging in just 10 seconds. ready imaging fault EZ imaging... Pick your tray and get your results 1LOAD TRAY Smart Tray
More informationThe Use of FRP (Fiberglass-Reinforced Plastic) in Phosphate Fertilizer and Sulfuric Acid Processes
The Use of FRP (Fiberglass-Reinforced Plastic) in Phosphate Fertilizer and Sulfuric Acid Processes Don Kelley Ashland Performance Materials 5200 Blazer Parkway Dublin, OH 43017 ABSTRACT The demand for
More informationBroad Base. Best Solutions. SIGRAFIL Continuous Carbon Fiber Tow
Broad Base. Best Solutions. COMPOSITEs Fibers and MATERIALS SIGRAFIL Continuous Carbon Fiber Tow 2 Carbon fibers and composites made by SGL Group. Q Comprehensive product range Q Integrated value chain
More informationRFID Systems Radio Country Approvals
SIMATIC Ident RFID Systems Radio Approvals 2017-12-17 www.siemens.com/ident Short Range Systems RF200 RF300 RF1060 MOBY D RF210R / RF220R 6GT2821-1AC10,-2AC10 RF210R / RF220R / RF240R/ RF250R/ RF260R IO-Link
More informationPROCESS ECONOMICS PROGRAM
PROCESS ECONOMICS PROGRAM Abstract SRI INTERNATIONAL Mod0 PM, California 94025 Process Economics Program Report No. 123 CARRON MONaIDE RECOVERY Carbon monoxide, as synthesis gas, is obtained largely from
More informationNon-Halogenated, Non-Styrenated Flame Retardant Composites
American Composites Manufacturers Association January 15-17, 2009 Tampa, FL USA Abstract Non-Halogenated, Non-Styrenated Flame Retardant Composites by Aaron C. Small, Luna Innovations Incorporated Thomas
More informationSTRENGTH+ High Modulus Carbon Fiber Reinforced LNP. High performance compounds for structural healthcare applications
STRENGTH+ Stiffness High Modulus Carbon Fiber Reinforced LNP THERMOCOMP and LUBRICOMP Compounds High performance compounds for structural healthcare applications SABIC Founded in 1976, SABIC is today the
More informationQIAcube Pure Efficiency
QIAcube Pure Efficiency Sample & Assay Technologies Walkaway spin-column processing The QIAcube automates your spin preps The revolutionary QIAcube makes automated sample prep available to all labs. The
More informationChromatography Column Performance and Data Analysis Success Guide. Hints and Tips for Better Purifications
Chromatography Column Performance and Data Analysis Success Guide Hints and Tips for Better Purifications This Chromatography Success Guide provides practical advice on preparative chromatography and protein
More informationPARALOID EXL 2314 Impact Modifier
Technical Data Sheet PARALOID EXL 2314 Impact Modifier Weatherable Impact Modifier For Engineering Resins Regional Product Availability Introduction North America Japan/Korea Asia Europe PARALOID EXL 2314
More informationCPI Conference Phoenix September PU 101 Polyurethane Chemistry. Course Overview
CPI Conference Phoenix September 2013 PU 101 Polyurethane Chemistry Course Overview Presenter: Brian Fogg completed 50 years of involvement in the polyurethane industry in 2013. His extensive technical
More informationSports & Recreation. Innovative Polymer Solutions for Footwear Applications. A Bit More Amazing. Lubrizol Engineered Polymers
Sports & Recreation Innovative Polymer Solutions for Footwear Applications A Bit More Amazing Lubrizol Engineered Polymers Footwear Lubrizol, An Essential Ingredient Lubrizol is a global technology company
More informationFluoropolymers in Healthcare
Fluoropolymers in Healthcare Daikin Overview Daikin America, Inc. Is A Wholly Owned Subsidiary of Daikin Industries, Ltd. Headquartered in Osaka, Japan. Fluorochemical Based Business Focusing On Air Conditioning
More informationC A R B O N F I B E R
CARBON FIBER 101 What is this stuff anyway? Carbon fiber is a high strength, high stiffness, low weight synthetic fiber that can be used in a wide variety of aesthetic and structural applications. Carbon
More informationBrendan J. O Toole, Ph.D. Department of Mechanical Engineering Howard R. Hughes College of Engineering University of Nevada Las Vegas
MEG 495/695 Special Topics: Entertainment Engineering Introduction to Composite Materials Brendan J. O Toole, Ph.D. Department of Mechanical Engineering Howard R. Hughes College of Engineering University
More informationProfessional Development Program Course Outlines PU POLYURETHANE CHEMISTRY
Professional Development Program Course Outlines PU 101 - POLYURETHANE CHEMISTRY Instructor: Brian Fogg completed 50 years of involvement in the polyurethane industry in 2013. His extensive technical and
More informationCarbon Fiber SMC Technology for Lightweight Structures
Carbon Fiber SMC Technology for Lightweight Structures Matt Kaczmarczyk Senior Design Engineer Quantum Composites- AS9100C:2009 / ISO9001:2008 1310 South Valley Center Drive Bay City, Michigan 48706-9798
More informationAbstract Process Economics Program Report 194A SUPERABSORBENT POLYMERS (April 2002)
Abstract Process Economics Program Report 194A SUPERABSORBENT POLYMERS (April 2002) Superabsorbent polymers (SAPs) represent a class of organic chemicals defined primarily by the their functional capability
More informationEurope
Americas U.S.A. Henkel Corporation 32100 Stephenson Highway Madison Heights, Michigan 48071 United States Tel: +1.866.332.7024 Fax: +1.248.583.2976 Canada Henkel Canada Corporation 2515 Meadowpine Blvd.
More informationPRODUCT INFORMATION LETTER
PRODUCT INFORMATION LETTER PIL CRP/14/8399 Dated 20 Mar 2014 Lead frame 2nde source qualification 1/4 PIL CRP/14/8399 - Dated 20 Mar 2014 Sales Type/product family label Type of change Reason for change
More informationStyrene Block Copolymers
PERP/PERP ABSTRACTS 2009 Styrene Block Copolymers Commercial technologies & costs of production for styrene block copolymers: SBS - Poly(styrene-butadiene-styrene), SIS - Poly(styrene-isoprene-styrene),
More information