STOCK LIST COQUITLAM, BC, CANADA SHEET PLATE COIL PIPE TUBE ROD BAR FITTINGS FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL
|
|
- Warren Edwards
- 6 years ago
- Views:
Transcription
1 STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL COQUITLAM, BC, CANADA
2 S T AINLESS STEEL ALLOYS 303, 304, 304L, 316, 316L, 317L, 321, 347, 254-SMO, Hastelloy, 6 moly stainless grades, Ferralium, Titanium, Monel, Zirconium, nickel based alloys, others available upon application and depending upon shape. 2B, #4 Finish 28 Gauge - 7 Gauge #8 Finish (Mirror) 22 Gauge - 11 Gauge HRAP Plate 3/16-2-1/2 Diamond Tread Plate 1/8-3/8 COIL (36-72 wide) 28 Gauge - 3/8 ROD, Round (12ft rml) 1/8-14 BAR (12ft rml) Rectangular 1/8-1-1/2 (thick) x 1/2-8 (wide) Hexagon 3/16-2-1/2 Square 1/8-2-1/2 PIPE (20ft) Seamless or Welded: Schedule 5s, 10s, 40s, 80, ASTM A 312 1/2-48 IPS x (Gauge or Schedule), ASTM A TUBING (20ft) Seamless or Welded: OD x Gauge ASTM A 249/A 269 1/8-4 ASTM A Ornamental: Mill, 180 Grit or Mirror Finish, ASTM A 554 ( wall) Round 5/8-3 Square 3/4-6 Rectangular 3/4 x 1-1/2-4 x 6 Threaded: 150 LB, 3000 LB 1/8-4 Socket Weld: 3000 LB and 6000 LB 1/8-4 Butt Weld: IPS and OD, ASTM A 774 1/2-48 WP and CR Classes, ASTM A 403 1/2-48 Belled or Grooved Ends 1/2-48 Threaded Nipples: (Sch 40, Sch 80) 1/8-4 FLANGES Class 150, MSS and ANSI 1/2-12 Classes 150, 300, ANSI B /2-12 Backing, Slip-On, Blind, Weld Neck For OD or IPS Sizes 1-48 ANGLE (22ft rml) 3/4 x 3/4 x 1/8-4 x 4 x 1/2 WIRE WIRE CLOTH 2 Mesh Mesh SHIM STOCK, 6 x 50 Rolls FLATTENED & EXPANDED SHEET 1/2 or 3/4 Diamonds #9 (.119 ), #13 (.080 ), #16 (.050 ), #18 (.040 ) NOTE: rml = Random Lengths ALUMINUM ALLOYS 1100, 3003, 5052, 5086, 6061, H H H32/H T T651 1/4-8 Cast Tooling Plate 1/4-1-1/2 TREAD PLATE 3003-H22, Bright.063-1/ T6 1/8-3/ H32, Bright.100-3/16 FLATTENED & EXPANDED 1/2, 3/4 & 1-1/2 Diamonds.051,.081,.125 COIL (36-96 wide).025-3/8 ROD, Round (12ft & 20ft) 6061-T6 (T6511) 1/4-14 BAR (12ft & 20ft) Rectangular: 6061-T6 (T6511) 1/8-4 (thick) x 1/2-6 (wide) Square: 6061-T6 (T6511) 1/4-4 Rectangular: 6063-T52 1/8-1/4 (thick) x 1/2-2 (wide) CHANNEL (20ft) 6061-T6, 6063-T52 1/2-12 SHAPES Hull Stiffeners Tees Hand Railings Designed to custom specifications PIPE (20ft) Structural: (Sch 40, Sch 80) 6061-T6 3/ T52 1/2-6 Welded: IPS x (Gauge or Schedule) 4-60 TUBING (20ft) Square: 6063-T52, 6061-T6 1/2-4 ( wall) 2-8 (.250 wall) Rectangular: 6063-T52, 6061-T6 1 x 1-1/2-2 x 8 ( wall) Round: 6061-T6 3/4-6 ( wall) Threaded 1/8-4 Butt Weld Seamless 1/2-6 Welded IPS x (Gauge or Schedule) 4-60 ANGLE (20ft) 6061-T6, 6063-T52 1/2 x 1/2 x 1/16-6 x 6 x 1/2 INDUSTRIES SERVED Alaskan Copper & Brass Company has served a wide range of industries for the past 90 years. Industries such as pulp and paper, boatbuilding, shipbuilding and repair, chemical, petrochemical, water treatment, mining, power, food processing and many more, rely on Alaskan Copper for their supply of corrosion resistant metals.
3 BRASS ALLOYS 230, 260, 270, 356, 360, others available upon application and depending on shape. Soft Half Hard Shim Stock (6 x 100 CTNS) COIL (12-36 wide) ROD, Round (12ft) Free Cutting Round 1/16-10 BAR (12ft) Rectangular 1/16-2 (thick) x 1/4-6 (wide) Hexagon 1/8-3-1/2 Square 1/8-3 Half Oval 3/32 x 3/8-3/8 x 2 Half Round 1/4 x 1/2-1/2 x 1 PIPE (12ft & 20ft) Standard (Sch 40) Red Brass C230 1/8-12 Extra Heavy (Sch 80) Red Brass C230 1/8-3 TUBING (12ft & 20ft) Round, Seamless Yellow Brass Round, Seamless Yellow Brass Square, Seamless Yellow Brass 1/8-4 OD (.065 wall) 3/4-10-1/4 OD (.125 wall) 1-3 OD (.065 wall) Threaded, Bronze, IPS Sizes 1/8-4 WIRE Soft BRONZE ALLOYS UNS number listed below Aluminum Bronze C Commercial Bronze C Naval Bronze C Phosphor Bronze C /8 Silicon Bronze (Everdur) C ROD, Round (12ft) Aluminum Bronze C /4-6 Aluminum Nickel Bronze C /8-8 Beryllium Copper C /16-2-1/2 Manganese Bronze C /4-6 Naval Bronze C /4-8 C /16-4-1/2 Phosphor Bronze C /4-6 Silicon Bronze (Everdur) C /4-3 BAR (12ft) Rectangular Naval Bronze C /8-1/2 (thick) x 1/2-5 (wide) Silicon Bronze C65500 Sheared or Sawed from Plate Hexagon Naval Bronze C Square Naval Bronze C /4-1-1/2 TUBING (20ft) Admiralty, Condenser C /8-3/4 Everdur C /4, THREADED Rough Bronze 1/8-4 FLANGES Rough Bronze 1/8-4 WIRE, SPRING TEMPER 18% Nickel Silver C Grade A Phosphor Bronze C ANGLE, ARCHITECTURAL C /2 x 1/2 x 1/16 - (12ft) 3 x 3 x 1/4 WIRE CLOTH Insect Screen FASTENINGS Silicon Bronze (Everdur) 14 Mesh - 50 Mesh Ring Nails VALVES, BALL TYPE Ball Type, Threaded 1/4-2 Solder Type, Gate 3/8-1-1/4 Screwed Type, Gate 1/4-2 BEARING BRONZE, SAE 660 C93200 Continuous Cast, Hollow 1/2-14 ID; ( rml) 3/4-16 OD Solid, Round ( rml) 1/2-10 (SAE841) Solid, Sintered 6 1/2 Long 1/2-3 ALUMINUM BRONZE, SAE 954 C95400 Continuous Cast, Hollow 1/2-14 ID; (144 rml) 3/4-16 OD Solid Round 1/2-10 (144 rml) NOTE: rml = Random Lengths ALASKAN INVENTORY IS ADJUSTED TO SERVE THE NEEDS OF OUR CUSTOMERS. IF THE MATERIAL OR SIZE IS NOT LISTED HERE, PLEASE CALL OR FAX FOR FURTHER INFORMATION.
4 COPPER-NICKEL ALLOYS C C / ROD, Round (12ft rml) / /2-6 BAR Upon application cut from plate PIPE & TUBING (20ft) Seamless 70-30: Classes 200, 700, 1650, 3300, / OD 90-10: Class 200, Sch 40 1/ OD Welded 70-30: Classes 50 & 200, Sch OD 90-10: Classes 50 & 200, Sch OD COPPER PIPE & TUBING Cont d Condenser & (.049 &.065 wall) 1/4-1 Threaded: 150 LB, 3000 LB & 6000 LB 1/8-4 Socket Weld: 3000 LB & 6000 LB 1/8-4 Butt Weld: NAVSEA & Commercial Sizes 1/4-24 Weld Base Outlets 1/4-4 Bosses: NAVSEA DWG /4-2 FLANGES Military & ANSI Dimensions Classes 150, 300, ANSI B16.5 1/2-24 Class 250, NAVSEA DWG , MIL-F-20042, NAVSEA /2-24 Backing, Slip-On, Clad, Blind, Overlay, Composite. For OD or IPS Sizes 1-24 NOTE: rml = Random Lengths ALLOYS 102, 110, 120, 122 Soft (6-48 wide) /8H TO 1/2H (12-48 wide) Electro Deposited (25 wide) Roofing (6-48 wide) 10, 12, 16, 20, 24, 32, 48 ounce COIL Electro-Deposited (25 wide) Soft (6-24 wide) ROD, Round (12ft) 1/8-6 BAR (12ft) Rectangular Bus Bar 1/16-2 (thick) x (Bare & Tinned) 1/2-6 (wide) Square 1/4-3 PIPE (20ft) Standard (Sch 40) 1/8-8 Extra Heavy (Sch 80) 1/8-8 TUBING (20ft) Soft in Coils (50ft & 60ft) 1/16-1 Hard Drawn 1/8-10-3/4 Water Tubing, Types K, L, M 3/8-5-1/8 P.V.C. Coated, Soft 1/4-1/2 Solder Joint 1/4-4 WIRE Soft Hard ROOFING Downspouts, Gutters, Accessories 2-6 PRE-PROCESSING SERVICES INCLUDE: COMPUTER-AIDED DESIGN AND LAYOUT Alaskan utilizes state-of-art computer equipment for layout and optimization of material. Data may be input directly from customer supplied DXF (data exchange format) files via or disk. This system, which communicates directly with our plasma burning tables, offers maximum accuracy and efficiency in processing of cut plate orders. COIL CUT-TO-LENGTH Alaskan s on-site Cut-To-Length line provides quick turnaround of coil orders, allows flexibility in sheet/plate lengths and widths (up to 50 feet long, 96 wide & 3/8 thick) minimizes customer material and welding costs. Cut-To-Length orders are also available with plastic or paper interleaving, vinyl covering on both sides, and line marking for easy identification. CUT PIECES Order the size and the shape that is needed, not just standard sizes! Complex shapes are cut by computerized plasma cutting tables. Carbide blade and abrasive saws are used for cutting thick materials (up to 8 thick). Precision shearing is available for cutting multiple parts to close tolerance. NON-STANDARD PLATE SIZES Automatic splice welding of sheet and plate produces special widths and lengths (up to 40 feet).
5 SHEET GAUGE CHARTS STAINLESS STEEL GAUGE THICKNESS /16 & Thicker is plate ALUMINUM GAUGE* THICKNESS Note: There is no official gauge standard for aluminum..250 & Thicker is plate *Brown & Sharpe s Gauge Standard B & S or American Gauge A.W.G. COPPER OUNCE THICKNESS GAUGE* 4 oz oz oz oz oz oz oz oz oz oz oz oz oz oz oz & Thicker is plate *Birmingham Gauge Standard B.W.G. BRASS GAUGE* THICKNESS & Thicker is plate *Brown & Sharpe s Gauge Standard B & S or American Gauge A.W.G. ALUMINUM WEIGHT CHARTS ALUMINUM BAR WEIGHTS (LBS/FT) SIZE ROUND SQUARE SIZE ROUND SQUARE 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / ALUMINUM (LBS/SQ FT) THICKNESS 5052-H H116/5086-H T6 SIZE ALASKAN INVENTORY IS ADJUSTED TO SERVE THE NEEDS OF OUR CUSTOMERS. IF THE MATERIAL OR SIZE IS NOT LISTED HERE, PLEASE CALL OR FAX FOR FURTHER INFORMATION.
6 S T AINLESS STEEL WEIGHT CHARTS STAINLESS STEEL SHEET GAUGE DECIMAL EQUIVALENTS LBS/SQ FOOT SHEET SIZE SHEET WEIGHTS (LBS) 36 x x x x x x x x x x x x x STAINLESS STEEL PLATE THICKNESS 3/16 1/4 5/16 3/8 1/2 5/8 3/ /4 1-1/2 2 DECIMAL EQUIVALENTS LBS/SQ FOOT SHEET SIZE PLATE WEIGHTS (LBS.) 48 x x x x x x x x x x x ALASKAN INVENTORY IS ADJUSTED TO SERVE THE NEEDS OF OUR CUSTOMERS. IF THE MATERIAL OR SIZE IS NOT LISTED HERE, PLEASE CALL OR FAX FOR FURTHER INFORMATION.
7 S T AINLESS STEEL WEIGHT CHARTS STAINLESS STEEL BAR LBS/FT LBS/FT SIZE ROUND SQUARE HEX SIZE ROUND SQUARE HEX 1/ / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / / STAINLESS STEEL ANGLE SIZE STAINLESS LBS/FT LBS/22 FT 3/4 x 3/4 x 1/ x 1 x 1/ / / /4 x 1-1/4 x 1/ / / /2 x 1-1/2 x 1/ / / x 2 x 1/ / / / /2 x 2-1/2 x 3/ / / x 3 x 1/ / / x 4 x 1/ / / STEEL PIPE ANNEALED WELDED AND SEAMLESS - ASTM A 312 STAINLESS STEEL FLAT BAR SIZE LBS/FT SIZE LBS/FT SIZE LBS/FT 1/8 X 1/ / / / / / / / /8 x / /8 x 1/ / / /16 x 1/ / / / / / / / /4 x / / / / /2 x 3/ x 1-1/ /4 x 1/ / / / / / / FT Random Lengths 22 FT Random Lengths 12 FT Random Lengths NOMINAL PIPE SIZE OUTSIDE DIAMETER SCH 5s LBS/FT SCH 10s LBS/FT SCH 40s LBS/FT SCH 80s LBS/FT 1/ / / / / / / / /2 2-7/ / / / / / / / / PLEASE CALL OR FAX FOR FURTHER INFORMATION ON GAUGE OR SCHEDULE PIPE ASTM A 778 AND SEAMLESS OR WELDED TUBING ASTM A 249/A 269 AND A 778
8 FULL SERVICE SUPPLIER OF CORROSION RESISTANT MATERIALS SINCE 1913 Alaskan Copper & Brass Company has been owned and operated by the same family since In our Seattle, Portland and Coquitlam distribution facilities, the emphasis has always been on personal service and long-term relationships with our customers. Our knowledgeable and friendly salespeople utilize one of the most sophisticated information systems in the metals industry to provide instantaneous access to an inventory of over 20,000 stocked items. 225 North Road Coquitlam, BC, Canada V3K 3V7 ALASKAN COPPER WORKS SEATTLE PORTLAND STAINLESS PRODUCTS FABRICATION BRANCH BRANCH DIVISION DIVISION (Corporate Offices) 3223 Sixth Avenue South 2440 Southeast Raymond 3200 Sixth Avenue South 3405 Sixth Avenue South Seattle, WA Portland, OR Seattle, WA Seattle, WA Phone (206) Phone (503) Phone (206) Phone (206) Fax (206) Fax (503) Fax (206) Fax (206) PRODUCTS AND SERVICES AVAILABLE FROM AND ALASKAN COPPER WORKS MILL PRODUCTS BOSSES AND COPPER ROOF COPPER-NICKEL STAINLESS STEEL FABRICATION CATALOG WELDED OUTLETS DRAINAGE PRODUCTS PRODUCTS PIPING PRODUCTS DIVISION Copper, Brass, Bronze, Branch outlets Available Copper Gutters, Copper-Nickel Sheet, Plate, Stainless Steel and Other Corrosion Resistant Alloy Stainless Steel, and in Copper, Nickel, Nickel Downspouts, Accessories Bar, Pipe, Tubing, Fittings Corrosion Resistant Metal Heat Exchangers, Pressure Aluminum Alloys, Stainless Steel and Roofing and Flanges Pipe, Flanges and Fittings Vessels, Tanks, Columns, Sheet, Plate, Coil, Pipe, and Other Corrosion STEEL PIPING PRODUCTS Special Fabrications Tube, Rod, Bar, Fittings Resistant Alloys Industrial Pipe, and Prefabricated Flanges and Extrusions Valves & Fittings Piping Systems THESE DETAILED CATALOGS AND BROCHURES ARE AVAILABLE ON OUR WEBSITE:
Aluminum Mill Products
Aluminum Mill Products Aluminum Angle, Channel, Pipe Fittings, Pipe, Rod, Bar, Sheet, Plate, Coil & Tubing ALASKAN COPPER & BRASS COMPANY History W hen Alaskan Copper Works was founded as a marine coppersmithing
More informationThe following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs.
The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs. I. Seamless Copper and Brass Tubing - as per ASTM and military standards,
More informationSTAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
More informationCopper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification
More informationSTOCKIST SUPPLIERS & EXPORTERS:
PIPES & TUBES: Stainless Steel: ASTM A 312, A 213, A 213, A 249, A 269, A 358, A 240, A 276 Type: 202, 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S, 409, 410, 420, 430 etc. Carbon
More informationCOPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6
More informationWilliams Metals. Providing Welding & Metals Solutions for Over 50 Years. Non-Ferrous Metals. Setting the Standard for Excellence.
Williams Metals and Welding Alloys, Inc. Providing Welding & Metals Solutions for Over 0 Years Non-Ferrous Metals Setting the Standard for Excellence. Williams Metals and Welding Alloys is a multi-location
More informationSTAINLESS STEEL STAINLESS HALF-ROUNDS STAINLESS SQUARES 303, 304/304L, 316L, 416, 17-4,
STAINLESS STEEL TECHNICAL DATA and APPLICATIONS Grade 201...9-2 Grade 303 and 303 G&P...9-3 Grade 304 and 304L...9-4 Grade 316L and 316L BSQ...9-5 Grade 410...9-6 Grade 416 and 416 PSQ...9-7 Grade 420...9-8
More informationMission Statement. State Steel strives to provide quality products and services at competitive
Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories
More informationONE-STOP SHOP FOR AEROSPACE MATERIALS
ONE-STOP SHOP FOR AEROSPACE MATERIALS Scope Metals Group is a leading distributor and supplier of finished and semi-finished metals products and engineered plastics products to industrial manufacturers.
More informationJ.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25
TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140
More informationMarcegaglia USA Munhall
Marcegaglia USA Munhall 1 Marcegaglia USA The Marcegaglia USA production facility is located in Munhall, PA (just outside Pittsburgh). It is devoted to the manufacturing of stainless steel, duplex and
More informationIt is our intent to always maintain the highest level of quality metals obtainable from our mill sources.
This stock catalog contains the sizes, weights and descriptions of all standard Steel, Brass, Bronze and Dura-Bar Cast Iron items that are available from stock for immediate delivery. However, new items
More informationSolutions in Steel Innovative Technologies for Smart Solutions
Solutions in Steel Innovative Technologies for Smart Solutions Company Montanstahl is a dynamic family-owned company active in the production and supply of high quality special steel shapes. Established
More informationLOW HEAT INPUT WELDING ALLOYS
ASTRALOY 662 CHARACTERISTICS: An all position AC/DC electrode for high strength, crack free joining of low/medium carbon, and medium tensile steels of various compositions. Low alloy medium carbon steels,
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationPRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings.
Stainless, DUPLEX, Super Duplex flanges and fittings PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings. introduction Our inventory consists
More informationFig. 1 - Standard Clevis Hanger
Revision 10/24/2007 Fig. 1 - Standard Clevis Hanger Component of State of California OSHPD Approved Seismic Restraints System Size Range Size 1/2" thru 36" pipe. Function Recommended for the suspension
More informationMaterial and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More informationSECTION ORNAMENTAL ALUMINUM RAILING. ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products.
SECTION 05720 ORNAMENTAL ALUMINUM RAILING ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products. This section is based on the products of Superior Aluminum Products,
More informationALL METALS & FORGE GROUP
ALL METALS & FORGE GROUP All Metals & Forge Group is an ISO9001:2008, AS/EN9100:2009 Rev. C manufacturer of open die forgings and seamless rolled rings, a certification it obtained and has held since 1994.
More informationThe Master of Master Distribution
The Master of Master Distribution Stainless and Special Metals Pipe and Tubing Pipe Fittings Pipe Flanges Valves Supplying stainless products to industrial distributors since 1963 MASTER OF MASTER DISTRIBUTION
More informationRPR Insul-Mate Sheet and Roll Jacketing
RPR Insul-Mate Sheet and Roll Jacketing ALUMINUM PRODUCTS Rolled Jacketing Sheeting (Flat and Corrugated) Cut to Length Cut & Rolled Width/Length: 36 and 48 wide 100, 50 and cut to length (thicker gauges
More informationSECTION DECORATIVE METAL AND GLASS RAILING
SECTION 05 73 00 DECORATIVE METAL AND GLASS RAILING PART 1 GENERAL 1.1 SUMMARY A) This section includes both standard and custom handrails as shown in the contract drawings. B) These include aluminum,
More informationMASTERSPEC - SHORT FORM. B. See Division 5 Section "Metal Stairs" for steel tube railings associated with metal stairs.
SECTION 05721 - ORNAMENTAL RAILINGS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Glass supported railings. B. See Division 5 Section "Metal Stairs" for steel tube railings associated
More informationDiffused Aeration Piping Equipment
1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections
More informationLight Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
More informationMASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING
SECTION 221316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following soil and waste, sanitary drainage and vent piping inside the building: 1. Pipe, tube,
More informationPRODUCT CATALOG. TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. amerpipe.com
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 825 Maryville
More informationSECTION SLUICE GATES
SECTION 11100 SLUICE GATES PART 1--GENERAL Fill in the blank with a short description of sluice gate usage, i.e., for isolation of wastewater, or for tank drainage, or for control of water surface. 1.01
More information1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061 etc.
Product Name Picture Alloy Temper Thickness Width 5 bars Tread Plate /Aluminu m Checker Plate 1060, 1100, 3003, 3105, 5052, 5083, 5754, 6061 etc. H12, H14, H16, H18, H22, H24, H26, H32, H34, H36, H38,
More informationE-Z-Ground Grounding Systems. Ground Wire Size. Water Pipe Size. 1/2 in /4 in. 2 in /2 in. 3-1/2 in TB
Waterpipe Ground Clamps Cat. No. Ground Wire Size Water Pipe Size 2-TB 1/2 in., 3/4 in., 1 or rebar 4-10 3-TB 1-1/4 in., 1-1/2 in. or 2 in. #6, #4, 4 2-1/2 in., 3 in. or 3-1/2 in. #2 WG 5-TB 4 in., 4-1/2
More informationOrsogril Fence & Handrail Infill Panels
Bar Gratings Safet y Gratings Orsogril Fence & Handrail Infill Panels Per forated Metals E xpanded Metals Algrip Floor Plate Construction Products Bar Gratings Standard Bar Grating Welded, Riveted & Pressure
More informationChrome Moly flanges and fittings
Chrome Moly flanges and fittings PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings. introduction Our inventory consists of a complete range
More informationPost-Tensioning Products
Introduction ECCO s post-tensioning products have been used extensively in Canada and the USA. From a few small knockouts to water tanks, highrise buildings, reactors and bridges, ECCO s commitment to
More informationSECTION HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS
Page 1 of 6 SECTION 08 32 20 HEAVY GLASS TOP HUNG SLIDING BI-FOLD DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED BI-FOLD GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationAmerican Metal Specialties, Inc.
American Metal Specialties, Inc. www.cablerailings.com (253) 272-9344 (253) 627-3843 Fax PART 1 GENERAL 1.1 SECTION INCLUDES SECTION 05 73 00 STAINLESS STEEL ORNAMENTAL HANDRAILS AND RAILINGS For best
More informationResource Guide. Section 4: Ni-Resist
Resource Guide Section 4: Ni-Resist Section 4 Ni-Resist Description of Grades... 4-3 201 (Type 1) Ni-Resist... 4-4 202 (Type 2) Ni-Resist... 4-6 Stock Listings... 4-8 4-2 Ni-Resist Description of Grades
More informationSECTION ORNAMENTAL ALUMINUM RAILING. ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products.
SECTION 05720 ORNAMENTAL ALUMINUM RAILING ** NOTE TO SPECIFIER ** Superior Aluminum Products, Inc.; Ornamental aluminum railing products. This section is based on the products of Superior Aluminum Products,
More informationglobal solutions : local support Knitted Conductive EMI Gaskets
global solutions : local support Knitted Conductive EMI Gaskets engineered antenna, emi, telematics and thermal applications Laird Technologies is committed to providing the world s leading OEMs with comprehensive
More informationAccepts Castings: End Cap #28: Wall Mount #52: Accepts Castings: Fence & Railing 04. EMS NC (704) fax
Welded Railing 2-5/8 Hollow Cap x 25 10-129 28-63-210 wt/ft: 0.573 accepts 3/4 Picket with 2 Post; Mates w/#133 2-5/8 Solid Cap x 25 10-130 28-63-200 wt/ft: 0.530 accepts 3/4 Picket w/2 Post; Mates w/#133
More informationSECTION ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING
7160 Krick Rd., Walton Hills, OH 44146 800-321-3827 - Tel 440-439-8650 - Fax 440-439-6889 SECTION 12 48 16 ENTRANCE FLOOR GRILLES STAINLESS STEEL GRATING PART 1. GENERAL 1.01 SUMMARY: This section includes
More informationSECTION TURBINE VENTILATORS
SECTION 07 72 00 TURBINE VENTILATORS **This is a CSI Three-Part Specification using CSI MasterFormat 2004-2010 Section Numbers and Titles. This specification must be edited to suit your particular project.
More informationAMERICAN NATIONAL STANDARD ANSI/NAAMM STANDARD. Maximum Bearing Bar Depth / 2 (63.5 mm)
METAL BAR GRATING AMERICAN NATIONAL STANDARD ANSI/NAAMM STANDARD MBG 531-17 GRATINGS 5 ANSI/NAAMM MBG 531-17 SEPTEMBER 7, 2017 METAL BAR GRATING MANUAL EIGHTH EDITION Maximum Bearing Bar Depth... 2 1 /
More informationA. Access doors and frames are part of an access door and frame allowance.
SECTION 08 31 13 ACCESS DOORS AND FRAMES PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationPowder-Metal Processing and Equipment
Powder-Metal Processing and Equipment Text Reference: Manufacturing Engineering and Technology, Kalpakjian & Schmid, 6/e, 2010 Chapter 17 Powder Metallurgy Metal powders are compacted into desired and
More informationAlloys SUPER SQUARE
Alloys ETD 150...8-2 ETD 150 Rounds...8-2 AISI 4140/41L40 - Annealed...8-3 AISI 4140 - Annealed Flats And Squares... 8-4 thru 8-5 AISI 4140 - Annealed Rounds... 8-5 thru 8-6 AISI 4140 Rounds HR Q&T...8-7
More informationAluminum Stock Guide.
For more information call (800) 926-2600 1 Materials Services Copper and Brass Sales Aluminum Stock Guide. 1 New! in this edition of the Aluminum Stock Guide, CBS Part Numbers make ordering easier than
More information+91-8048078804 Prayas Steel & Alloys http://www.stainlesssteelscraps.com/ We are importers, stockiest & suppliers of ferrous, non ferrous metal and scrap. Our range of ferrous & non ferrous metal products
More informationPowder Metallurgy. Powder-Metal Processing and Equipment 11/10/2009
Powder Metallurgy Powder-Metal Processing and Equipment Metal powders are compacted into desired and often complex shapes and sintered* to form a solid piece * Sinter: To heat without melting Text Reference:
More informationRA17-4 stainless. Introduction
RA17-4 stainless Introduction RA17-4 is an age-hardening martensitic alloy combining high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short-time, simple lowtemperature
More informationDivision 11 - Equipment Section 11401
PART 1 - GENERAL 1.1 GENERAL A. Division 1 General Requirements applies and becomes a part of this Section of the Specification as fully as if repeated herein. B. Items of equipment which are included
More information71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding. Weld Metal - Chemistry
Flux Cored Wire 71T1 - Gas Shielded Flux Cored Welding Wire Provides excellent performance in all position welding Description: Provides a stable arc, low spatter, easy to remove slag, and neat weld metal.
More informationPREMIUM MILLS, PREMIUM STEEL. Linepipe Seamless Pipe/O.C.T.G Stainless Steel Pipe and Tube Steel Plate Fitting & Flange Wind Tower
PREMIUM MILLS, PREMIUM STEEL Linepipe Seamless Pipe/O.C.T.G Stainless Steel Pipe and Tube Steel Plate Fitting & Flange Wind Tower Premium mills, premium steel Petrosteel Technologies General Catalogue
More informationSECTION FACILITY STORM DRAINAGE
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 22 14 00 Storm drainage systems, including piping and all necessary accessories as designated in this section. 1.2 RELATED WORK A. Penetrations in rated enclosures:
More informationC. ASSE 1013 Performance Requirements for Reduced Pressure Principle Backflow Preventers.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationThis specification describes the minimum requirements for piping systems for the following service:
1.0 APPLICATION 2017/0/12 1/ This specification describes the minimum requirements for piping systems for the following service: Process Water or Underground Dewatering Service piping systems at pressures
More informationWe manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars
EXTRUDED RODS INTRODUCTION` We manufactures copper & copper based alloys mainly brass / bronzes extrusion & drawn quality rods / bars in different shapes like round, hex, square, rectangular & flat. We
More informationModular CABANA Kit 16 x 16 (6x6) Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper
Lumber: Western Red CEDAR #1 (Cabinet) Shingles: 5X / 16" long / 1/2" thick or 16 oz. copper Modular CABANA Kit 16 x 16 (6x6) Hipped Roof & Build-in Transoms Entry Key Lock Set (bright brass or dark bronze)
More information12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
More informationPRESTON HEALTH SERVICES ARCHITECT'S NO. 2700
SECTION 09 5113 - ACOUSTICAL PANEL CEILINGS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 22 1319 - SANITARY WASTE PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationNAVSEA STANDARD ITEM. 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and Electromechanical Measuring Instruments
NAVSEA STANDARD ITEM ITEM NO: 009-52 DATE: 29 JUL 2011 CATEGORY: II 1. SCOPE: 1.1 Title: Relief Valve; repair 2. REFERENCES: 2.1 S9086-RJ-STM-010/CH-504, Pressure, Temperature and Other Mechanical and
More informationSECTION LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS
Page 1 of 9 SECTION 10 2238.13 LIGHT DUTY SLIDING AND STACKING GLASS DOOR SYSTEMS USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED FOLDING GLASS PANEL PARTITIONS. SECTION INCLUDES OVERHEAD TRACK ASSEMBLY,
More informationEstablished DOC. NO : SSI / PROFILE Rev-03
Established 2002 www.sandskuwait.com C O M P A N Y P R O F I L E DOC. NO : SSI / PROFILE-001 - Rev-03 2 S & S International Company W.L.L. was Incorporated in 2009 with the primary objective of becoming
More informationMetal Roof Panels
University of New Hampshire University of New Hampshire Scholars' Repository Division 07 Thermal and Moisture Protection Chapter 5 Technical Construction and Renovation Standards 1-25-2013 074113 - Metal
More informationHASTELLOY B-3 alloy Principal Features
HASTELLOY B-3 alloy Principal Features Exceptional resistance to HCl and H 2 SO 4 and enhanced structural stability HASTELLOY B-3 alloy (UNS N10675) exhibits extremely high resistance to pure hydrochloric,
More informationCorrosion and Performance Issues for Immersion Service Shell and Tube Heat Exchangers
Corrosion and Performance Issues for Immersion Service Shell and Tube Heat Exchangers Condenser & Heat Exchanger Applications Tubesheet coatings Tube-end ID coatings Full-length tube coatings Waterbox
More informationPlasma Heat and Surface Treatment
Plasma Heat and Surface Treatment Plasmait is a supplier of heat and surface treatment solutions based on plasma technology. We design, build, deploy and support production machinery for continuous and
More informationWith World Class Quality
Gaskets With World Class Quality Superlite Jointings Private Limited ( AN ISO /TS : 16949-2009 COMPANY ) Mounting Instructions The principle The spiral wound function is based on the metal winding/ filler
More informationAluminum Component Pipe Railings
1 SECTION 05 7360 ALUMINUM COMPONENT PIPE RAILINGS PART 1 GENERAL 1.01 SECTION INCLUDES A. Aluminum component pipe handrails and railings. 1.02 RELATED REQUIREMENTS A. Section 02 9000: Landscaping: Installation
More informationInnovative heat treatment technologies. Field proven reliability and cutting-edge technology for every application
Innovative heat treatment technologies Field proven reliability and cutting-edge technology for every application Leading-edge heat treatment furnaces meeting international safety and quality standards
More informationCast Irons, Ductile Irons & Malleable Irons
Cast Irons, Ductile Irons & Malleable Irons CAST IRONS mium Sulfur Silicon Nickel Chro- Copper Alloying Elements TransverseTest Load Transverse Test Deflection at Center ksi Mpa Lbs. kn in. mm. HI-STRENGTH
More informationSECTION EXPANSION CONTROL
SECTION 07 95 00 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationSECTION FLAGPOLES. 1.1 SUMMARY A. Section Includes: 1. Fixed high dimensional, ground set, uniform conical taper, seamless tube flag pole.
SECTION 10 75 00 FLAGPOLES SPEC WRITER NOTE: Delete text between // // not applicable to project. Edit remaining text to suit project. PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Fixed high dimensional,
More informationFSection F. Sheets and Plates. Plates. Plates and Sheets. Plates. Plates. Sheets and Plates
FSection F HIGH STRENGTH LOW ALLOY STEELS HEAT TREATED CONSTRUCTIONAL ALLOY STEELS ABRASION RESISTING STEELS HIGH STRENGTH LOW ALLOY STEELS... 2-3 Sheets and Plates HEAT TREATED CONSTRUCTIONAL ALLOY STEELS...
More informationGalvanic Corrosion Prevention Guide for Water Cooling Systems
WATER COOLED DEVICES Galvanic Corrosion Prevention Guide for Water Cooling Systems November 2017 White Paper Created by Helen E. Kane, Advanced Energy Industries, Inc. Water Cooled Devices Abstract This
More informationSHEET AND COIL. 5MPage 1. 5 Sheet and Coil
SHEET AND COIL ALUMINIZED COIL AND SHEET 5-22 COLD ROLLED COIL AND SHEET General 5-11 Tolerances 5-12 to 5-14 GALVANIZED COIL AND SHEET General 5-15 Chemical Composition 5-16 Weight of Coating 5-17 Tolerances
More informationFLOOR AND AREA DRAINS
Pictorial Index Product Recommendations Floor Drain Selection Factors Load Rating Grate Free Area Material & Characteristics Pipe Connection Commonly Specified Options Typical Installations FLOOR AND AREA
More informationSECTION 1043 FENCE MATERIAL
SECTION 1043 FENCE MATERIAL 1043.1 Scope. This specification covers the material required in the construction of chainlink fence and woven wire fence. 1043.2 Basis of Acceptance. The basis of acceptance
More informationMERCHANTS METALS. A. ASTM F552 Standard Terminology Relating to Chain Link Fencing
MERCHANTS METALS SECTION 32 31 13 COLORBOND CHAIN LINK FENCE AND GATES 2014 PART 1 GENERAL 1.1 RELATED DOCUMENTS A. DIVISION 01 - GENERAL REQUIREMENTS: Drawings, quality, product and performance requirements,
More informationSECTION PLUMBING PIPING SYSTEMS
SECTION 15300 PLUMBING PIPING SYSTEMS PART 1 - GENERAL 1.01 SPECIAL NOTICE A. Each contractor shall read all relevant documents, become familiar with the job, the scope of work, type of general construction,
More information1. Always looking to the future. 2. Commitment to quality and excelence in service. 3. Experience and development. 4. The value of our team: the
1. Always looking to the future. 2. Commitment to quality and excelence in service. 3. Experience and development. 4. The value of our team: the people. 5. Technological vanguard for the industry. 6. Measurement
More information1470 Dale Court Austell, GA Phone: Fax:
1470 Dale Court Austell, GA 30168 Phone: 404-351-2202 Fax: 404-351-2203 LC METALS, INC. PRODUCT INDEX Page # STUD GUARDS...3 FHA STRAPS...3 BOCA PLATES (Nail Plates)...4 PLUMBERS TAPE (Banding Iron)...4
More informationMaterials Carbon Steel is used in the manufacturing of riser and pipe clamps. Stainless Steel and other materials are available.
Pipe clamps offered in this section are designed for support and attachment of pipe to structural members. wide range of pipe clamps are available for various applications. Materials arbon Steel is used
More informationWELCOME TO TRUS GLOBAL CO.,LTD TOTAL SOURCING SOLUTION COMPANY
WELCOME TO GLOBAL CO.,LTD TOTAL SOURCING SOLUTION COMPANY 1. Index 1. Index 2. Introduction 3. Pipe Supply 4. Fitting Supply 5. Flange Supply 6. Hammer Wing Union Supply 7. Bolt / Nut Supply 8. Gasket
More informationCUSTOMS TARIFF - SCHEDULE XV - 1
XV - 1 Section XV BASE METALS AND ARTICLES OF BASE METAL Notes. 1. This Section does not cover: (a) Prepared paints, inks or other products with a basis of metallic flakes or powder (headings 32.07 to
More informationStainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
More informationNON-FERROUS METAL DISTRIBUTION CAST-PLATE PRODUCTION CNC-PROCESSING. AMCO at a glance. My supplier has to deliver on his promise. I count on AMCO.
NON-FERROUS METAL DISTRIBUTION CAST-PLATE PRODUCTION CNC-PROCESSING AMCO at a glance My supplier has to deliver on his promise. When metal and service shine. Quality starts by giving the customer s thinking
More informationSection 906. STRUCTURAL STEEL
906.01 Section 906. STRUCTURAL STEEL 906.01. General Requirements. Finished rolled shapes must be free from imperfections that affect strength and durability in accordance with ASTM A 6. Rolled shapes
More informationWeir Valve Selections
Unlined Metal Excellent Cvs Complete Selection of End Connections ASTM Materials Include: Cast Iron ASTM A-126 Class B Ductile Iron ASTM A-395 Grade 60-40-18 Cast Steel ASTM A-216 Grade WCB 316 Stainless
More informationSECTION HVAC GRAVITY VENTILATORS
SECTION 23 37 23 HVAC GRAVITY VENTILATORS PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationthermoweld The Contractors Choice GREAT PRODUCTS GREAT SERVICE GREAT PEOPLE
The Contractors Choice the Contractors Choice Founded in 1958, with locations in Tulsa and Broken Arrow, Oklahoma. is part of the Quality Brands of Continental Industries. TABLE OF CONTENTS THE PROCESS...4
More informationDBI-SALA Uni 8 Overhead Horizontal Lifeline Cable System SECTION HORIZONTAL FALL PROTECTION - OVERHEAD CABLE
SECTION 112429.18 - HORIZONTAL FALL PROTECTION - OVERHEAD CABLE PART 1 - GENERAL 1.1 SECTION INCLUDES A. Provide overhead horizontal cable fall protection system, including end anchors, energy absorbers,
More information1. Vertical reciprocating conveyor, Hydraulic straddle VRC.
PART 1: GENERAL 1.01 Section Includes: 1. Vertical reciprocating conveyor, Hydraulic straddle VRC. a. Machine, controller, platform, structural steel hoist frame. b. Wire mesh enclosure and gates. Related
More informationCUSTOMS TARIFF - SCHEDULE. Chapter 74 COPPER AND ARTICLES THEREOF
74 - i Chapter 74 COPPER AND ARTICLES THEREOF Note. 1. In this Chapter the following expressions have the meanings hereby assigned to them: (a) Refined copper Metal containing at least 99.85% by weight
More informationPipe Pile. New Jersey Department of Transportation, Brielle, NJ. Route 70 Bridge over the Manasquan River, Brielle, NJ. USACE, Santa Maria, CA
Pipe Pile Similar to H-piles, pipe piles are also designed to transfer structural loads through the foundation to soils below. Where H-piles are typically classified as point bearing, pipe piles are most
More informationSECTION ALUMINUM STORM WINDOWS
PART 1 - GENERAL 1.1 DESCRIPTION: SECTION 08 51 69.11 ALUMINUM STORM WINDOWS SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Also delete any other item or paragraph not applicable
More informationCOMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS
INCH-POUND A-A-59440/2B 21 May 2012 SUPERSEDING A-A-59440/2A 23 May 2005 COMMERCIAL ITEM DESCRIPTION SPECIFICATION SHEET COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS
More informationMODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS
MODERNFOLD GWS 100SR-G MOVEABLE GLASS WALLS Ideal for applications requiring space division, visibility and security Used in bank lobbies, offices, conference areas, interior storefronts and arena skyboxes
More information