Corning RC Specialty Fibers Reduced Cladding Fibers Enable Miniaturization and Device Integration
|
|
- Suzanna Hart
- 6 years ago
- Views:
Transcription
1 Corning RC Specialty Fibers Reduced Cladding Fibers Enable Miniaturization and Device Integration Photonic Materials PI1442 Issued: July 2005 Supersedes: August 2003 Featuring ultra-tight specifications, Corning offers the broadest portfolio of 80-micron fibers in the industry. Corning RC Specialty Fibers include high index, single-mode and polarization maintaining fibers to meet a wide range of requirements. Manufactured with Corning s patented outside vapor deposition process, and based on decades of experience in specialty fiber development, Corning RC Specialty Fibers set the industry standard for consistent geometric properties, high mechanical reliability, and efficient splicing. Miniature components and compact optical modules Micro-packaged couplers Low loss fused fiber devices Small form factor EDFAs Pump pigtails Planar optics Integrated optics Modulators Patented outside vapor deposition process provides outstanding consistency and uniformity Dual acrylate coating system provides superior mechanical robustness Ultra-tight specifications World class reliability support for handling and deployment Technical support for splicing to 125-micron products
2 Corning RC PM Specialty Fibers Core Stress Applying Part Cladding Inner Coating The Corning PM Specialty Fiber design uses two stress applying parts to create an extremely high birefringence, resulting in fiber with excellent polarization maintaining properties. This design was invented and patented by Corning Incorporated. Corning continues to have a manufacturing partnership with Fujikura Ltd. Outer Coating High performance transmission laser pigtails Polarization-based modulators High-data-rate communications systems Polarization-sensitive components Extremely high birefringence Excellent polarization maintaining properties Low attenuation General Specifications Corning RC PM Specialty Fibers are available in standard lengths of 100, 150, 200, 250, 300, 350, 400, 450, and 500 meters. Standard proof test of 100 kpsi, or optional 200 kpsi, is applied to the entire length of the fiber. The fiber operates in a temperature range of -40 to 85 C. Maximum Typical Mode-field Beat Length Cross Talk Cross Talk Cutoff Maximum Product Wavelength Diameter Range at 100m at 2m Wavelength Attenuation Type (nm) (µm) (mm) (db) (db) (nm) (db/km) RC PM ± RC PM 14XX ± RC PM ± RC PM ±
3 Key Geometric Specifications Coating Outer Cladding Outer Core-to-cladding Product Coating Diameter Diameter Offset Product Type Type (µm) (µm) (µm) Description RC PM 1550 UV/UV Acrylate 165 ± ± RCPM 15 RC PM 14XX UV/UV Acrylate 165 ± ± RCPM 14 RC PM 1300 UV/UV Acrylate 165 ± ± RCPM 13 RC PM 980 UV/UV Acrylate 165 ± ± RCPM 98 RC SMF Fiber SMF-28e Fiber RC HI 1060 RC PM db 0.25 db 0.07 db RC PM db 0.10 db N.A. 3
4 Corning RC HI Specialty Fibers Component fibers for EDFAs, couplers, other DWDM components Pigtails for pump laser diodes 80-micron diameter for miniature packaging High core index of refraction Ultra-tight specifications for outside cladding diameter and core-to-cladding offset High numerical aperture Excellent consistency RC HI 980 RC HI 1060 Maximum Attenuation nm nm nm Cutoff Wavelength 930 ± 50 nm 920 ± 50 nm Mode-field Diameter 4.2 ± nm 5.9 ± nm 6.2 ± nm 9.9 ± nm Key Geometric Specifications Cladding Outside Diameter 80 ± 1 µm 80 ± 1 µm Coating Outside Diameter 165 ± 10 µm 165 ± 10 µm Core-to-cladding Offset 0.5 µm 0.5 µm Performance Characterizations Operating Temperature 60 to 85 C 60 to 85 C Nominal Delta (Typical) 1 % 0.45 % Numerical Aperture (Typical) Standard Lengths 0.5, 1, 2, 5 km 0.5, 1, 2, 5 km Proof Test 100, 200 kpsi 100, 200 kpsi SMF-28e RC SMF HI 1060 RC PM 980 Fiber Fiber HI 980 RC HI 980 N.A. N.A. N.A db 0.05 db RC HI db 0.07 db 0.16 db 0.08 db N.A. 4
5 Corning RC HI 1060 FLEX Specialty Fiber Premium grade WDM couplers for EDFAs Ultra-low bending loss Low loss fused devices for C- and L-Band 80-micron diameter for subminiature Tap couplers packaging Splitters and combiners Excellent geometry control CATV couplers Ultra-compact components requiring small bend radii Pigtails in bend-sensitive applications Maximum Attenuation Cutoff Wavelength Mode-field Diameter nm nm 930 ± 40 nm 4.0 ± nm 6.3 ± nm Key Geometric Specifications Cladding Outside Diameter 80 ± 1 µm Coating Outside Diameter 165 ± 10 µm Core-to-cladding Offset 0.5 µm Performance Characterizations Bend Loss at 1550 nm (Typical) 0.1 db 5 turns at 10-mm radius Operating Temperature 60 to 85 C Nominal Delta (Typical) 1 % Numerical Aperture (Typical) 0.2 Standard Lengths 0.5, 1, 2, 5 km Proof Test 100, 200 kpsi SMF-28e RC SMF Fiber Fiber Er 1550C Er 1550C3 RC HI 1060 FLEX 0.22 db 0.12 db 0.10 db 0.08 db 5
6 Corning RC SMF Specialty Fiber Low loss miniature fused devices for C- and L-Band Ultra-compact components requiring small bend radii Pigtails in bend-sensitive applications Ultra-low splice loss to SMF-28e fiber 80-micron diameter for miniature packaging Low bending loss Excellent geometry control Maximum Attenuation Cutoff Wavelength (TIA/EIA, FOTP-80) Coiled Cutoff at 80 mm Diameter Coiled Cutoff at 32 mm Diameter Mode-field Diameter Bend Loss at 1550 nm nm nm 1300 ± 60 nm 1210 ± 60 nm 1140 ± 60 nm 9.10 ± nm ± nm 0.1 db 5 turns at 16-mm radius Key Geometric Specifications Cladding Outside Diameter 80 ± 1 µm Coating Outside Diameter 165 ± 10 µm Core-to-cladding Offset 0.5 µm Performance Characterizations Operating Temperature 60 to 85 C Nominal Delta (Typical) 0.36 % Numerical Aperture (Typical) 0.12 Standard Lengths 0.5, 1, 2, 5 km Proof Test 100, 200 kpsi SMF-28e RC HI Fiber RC HI 1060 RC HI 980 RC PM FLEX RC SMF Fiber 0.05 db 0.08 db 0.11 db 0.09 db 0.12 db For More Information For more information about Corning s leadership in specialty fiber technology, visit our website at To obtain additional technical information or an engineering sample, or to place an order for this product, please contact us: Phone: Fax: specialtyfiber@corning.com Corning Incorporated
Standard fiber offering.
Standard fiber offering. Stress Corrosion Factor Strength Chart www.nufern.com C-Band Erbium Doped Fiber Single-Mode Fiber Nufern s high performance C-Band Erbium-Doped 980-HP Fibers (EDFC-980-HP and EDFC-980C-HP-80)
More informationRightWave EDF Family. The Right Fiber Diet for Optical Amplifier Design. OFS Your Optical Fiber Solutions Partner
Your Optical Fiber Solutions Partner RightWave EDF Family The Right Fiber Diet for Optical Amplifier Design Broad portfolio suited to diverse needs Proven product uniformity, quality and performance Impeccable
More informationAS... UV FIBERS AS... IR FIBERS GRADED INDEX FIBERS PCS - FIBERS HPCS - FIBERS SINGLE-MODE FIBERS CAPILLARIES
AS... UV FIBERS AS... IR FIBERS GRADED INDEX FIBERS PCS - FIBERS HPCS - FIBERS SINGLE-MODE FIBERS CAPILLARIES AS... UV-FIBERS Features Higher transmission than PCS-Fibers between 180 nm and nm High core
More informationFujikura PANDA fiber products and Basics of PM fibers
Fujikura PANDA fiber products and Basics of PM fibers Fiber Optics components Engineering Department Fujikura Ltd. 1 Fujikura PANDA fiber solutions Fujikura has been developing below new PANDA fibers for
More informationProduct Classification. Standards And Qualifications. Representative Image. General Specifications. Construction Materials
LazrSPEED Plenum Distribution Cable, 6 fiber single-unit Product Classification Portfolio CommScope Product Type Fiber indoor cable Regional Availability Asia Australia/New Zealand EMEA Latin America North
More informationHard Coated Silica/Silica (Low OH) Radius
DESCRIPTION When looking for a silica core and silica clad fiber with a hard polymer coating that allows a high core-to-clad ratio and a numerical aperture (N.A.) of 0.22 for efficient light coupling,
More informationOPTICAL FIBER SOLUTIONS
www.ofsoptics.com/medical OPTICAL FIBER SOLUTIONS FOR YOUR MEDICAL DEVICE ISO 9001 and 13485 Certified FDA Good Manufacturing Practices USP Class VI and ISO10993 for Biocompatibility Low Bioburden Assembly
More informationSpecialty Multimode Graded-Index Fiber
Specialty Fiber MM Graded-Index Fibers Fiber Name 50/125 62.5 50/125 Hermetic 50/125 Acrylate 100/140 Acrylate 100/140 High-Temp 100/140 Dual Acrylate 100/140 Unbuffered 100/140 Buffered Geo50 Core/Clad/Buffer
More informationRare Earth Doped Fibers for Use in Fiber Lasers and Amplifiers
Photonics Media Webinar: 4 th Nov 2013 Rare Earth Doped Fibers for Use in Fiber Lasers and Amplifiers George Oulundsen, Fiber Product Line Manager Bryce Samson, VP Business Development 1 Outline Introduction
More informationDetailed Specifications & Technical Data
For more information please call 1-800-Belden1 See Put-ups and Colors Related Documents: No.10 for Fiber Optic Cables.pdf Cable Characteristics: DESCRIPTION: 4 to 36 optical fibers, Gel filling loose tubes
More informationPlastic Coated Silica/Silica (Low OH) FIBER CROSS SECTION Polyimide and Acrylate Coated. Nylon and Tefzel Coated
DESCRIPTION When looking for a high quality fiber with superior transmission and a numerical aperture (N.A.) of 0.22 for efficient light coupling, the is the fiber of choice. The Anhydroguide fiber is
More informationHigh Gain Coefficient Phosphate Glass Fiber Amplifier
High Gain Coefficient Phosphate Glass Fiber Amplifier Michael R. Lange, Eddy Bryant Harris Corp. Government Communications Systems Division P.O. Box 37 (MS: 13-9116) Melbourne, FL 3292 Michael J. Myers,
More informationAmplifiers for the Masses: EDFA, EDWA, and SOA Amplets for Metro and Access Applications
Amplifiers for the Masses: EDFA, EDWA, and SOA Amplets for Metro and Access Applications Introduction Kathy Nguyen OPTI 521 Synopsis Fall 2011 The demand for quality bandwidth is increasing with the rise
More informationHard Coated Silica/Silica (Standard OH) Radius
DESCRIPTION When looking for a silica core and silica clad fiber with a hard polymer coating that allows a high core-to-clad ratio and a numerical aperture (N.A.) of 0.22 for efficient light coupling,
More informationSpecifications of. Single Armored Optical Fiber Cable
SPEC. NO A15022701 Sheet no.1 of 7 Date: 15-02-27 Specifications of Single Armored Optical Fiber Cable (GYFTS) 1. General SPEC.NO A15022701 Sheet No.2 of 7 1.1 This specification covers the requirements
More informationAbout Omics Group conferences
About Omics Group OMICS Group International through its Open Access Initiative is committed to make genuine and reliable contributions to the scientific community. OMICS Group hosts over 400 leading-edge
More informationOptical Fiber Behavior in Radioactive Environments
Draka Comteq Optical Fibers and Cables Optical Fiber Behavior in Radioactive Environments Rob Gilberti - Draka Comteq - Electromagnetic immunity no cross talk between adjacent fibers direct contact with
More informationPM double-clad fibers for high power lasers and amplifiers
PM double-clad fibers for high power lasers and amplifiers Kanishka Tankala, Adrian Carter, David Machewirth, Julia Farroni, Jaroslaw Abramczyk and Upendra Manyam Nufern, 7 Airport Park Road, East Granby,
More informationInnovative Fiber Optics Every Step of the Way
Innovative Fiber Optics Every Step of the Way 05 A full range of services for your needs 06 Fiber overview 07 Optran UV, Optran WF Silica / silica fiber with optional buffers 08 Optran UV NSS Silica /
More informationENERGY PROTOLON(SMK) LWL. (N)TSKCGEWOEU Medium Voltage Reeling Cable with integrated Fibre Optics
ENERGY PROTOLON(SMK) LWL (N)TSKCGEWOEU Medium Voltage Reeling Cable with integrated Fibre Optics Technical Data Type Type designation Approvals/ standards Application PROTOLON (SMK) LWL (N)TSKCGEWÖU DIN
More informationDiode Pumped Miniature Eye-Safe Laser Q-Switched by Passive Materials
Diode Pumped Miniature Eye-Safe Laser Q-Switched by Passive Materials Presented at SPIE AeroSense 22 Ruikun Wu, J.D. Myers, M.J. Myers, Christopher R. Hardy Kigre, Inc.1 Marshland Road, Hilton Head Island,
More informationHigh Power Operation of Cryogenic Yb:YAG. K. F. Wall, B. Pati, and P. F. Moulton Photonics West 2007 San Jose, CA January 23, 2007
High Power Operation of Cryogenic Yb:YAG K. F. Wall, B. Pati, and P. F. Moulton Photonics West 2007 San Jose, CA January 23, 2007 Outline Early work on cryogenic lasers MPS laser technology Recent program
More informationA COMPARISON OF THE TRANSMISSION LOSSES OF DIFFERENT OPTICAL FIBER MATERIALS
PK ISSN 22-2941; CODEN JNSMAC Vol. 46, No.1 & 2 (April & October 26) PP 47-51 A COMPARISON OF THE TRANSMISSION LOSSES OF DIFFERENT OPTICAL FIBER MATERIALS S F SHAUKAT, M A U KHAN, R FAROOQ* Department
More informationFTTH Fiber Optical Cable
FTTH Optical Cable FTTH Drop Cables are designed to connect the fiber access point to the ONT on the home in a FTTH network. It offers an efficient and economical solution for deploying fiber in FTTH network.
More informationGeneric Requirements for Optical Fiber and Optical Fiber Cable
Contents Generic Requirements for Optical Fiber and Optical Fiber Cable Contents Telcordia GR-20 - Documentation Information Preface... Preface 1 1. Introduction... 1 1 1.1 Purpose and Scope... 1 1 1.2
More informationPERFORMANCE SPECIFICATION SHEET
METRIC MIL-PRF-85045/21 26 July 1999 PERFORMANCE SPECIFICATION SHEET CABLE, FIBER OPTIC, EIGHT FIBERS, ENHANCED PERFORMANCE, CABLE CONFIGURATION TYPE 2 (OFCC), FOR SUBMARINE OUTBOARD USE ONLY (NOT FOR
More informationInternational Journal of Scientific & Engineering Research, Volume 6, Issue 2, February-2015 ISSN PHOTONIC CRYSTAL FIBER- AN OVERVIEW
45 PHOTONIC CRYSTAL FIBER- AN OVERVIEW Neha Mahnot1, Shikha Maheshwary2, Rekha Mehra3 1, 2, 3 Govt. Engg. College, Ajmer 2 shikhasm1992@gmail.com 1 neha29mahnot@gmail.com Abstract- This review paper gives
More informationScintillating Optical Fibers
Scintillating Optical Fibers Plastic Scintillating Fibers Saint-Gobain Crystals manufactures a variety of plastic scintillating, wavelength-shifting and light-transmitting fibers used for research and
More informationSingle-polarization ultra-large-mode-area Ybdoped photonic crystal fiber
Single-polarization ultra-large-mode-area Ybdoped photonic crystal fiber O. Schmidt, J. Rothhardt, T. Eidam, F. Röser, J. Limpert, A. Tünnermann Friedrich-Schiller University, Institute of Applied Physics,
More informationOptical fibers. Laboratory of optical fibers. Institute of Photonics and Electronics AS CR, v.v.i.
Optical fibers Laboratory of optical fibers Institute of Photonics and Electronics AS CR, v.v.i. http://www.ufe.cz/en/laboratory-optical-fibres n 1 n 1 > n 2 Waveguiding principle optical fiber W. Snell
More informationUtilizations of two-stage erbium amplifier and saturable-absorber filter for tunable and stable power-equalized fiber laser
Utilizations of two-stage erbium amplifier and saturable-absorber filter for tunable and stable power-equalized fiber laser References Chien-Hung Yeh* * Information and Communications Research Laboratories,
More informationOptical Components: Laser Crystals
Optical Components: Laser Crystals Table of Contents Crystals Introduction... 2 Nd: YVO 4... 3 Nd:YAG... 6 Nd:YLF... 7 Cr:YAG... 9 1 Crystals Introduction Sinoceramics supplies many types of crystals for
More information2-D Array Wavelength Demultiplexing by Hybrid Waveguide and Free-Space Optics
2-D Array Wavelength Demultiplexing by Hybrid Waveguide and Free-Space Optics Trevor K. Chan, Maxim Abashin and Joseph E. Ford UCSD Jacobs School of Engineering Photonics Systems Integration Lab: PSI-Lab
More informationKIGRE, INC. KIGRE, INC. 100 Marshland Road, Hilton Head, SC USA Ph: Fax:
SPECIAL GLASS MELTING SERVICES Er:Yb:Nd:Laser Glass Filter Glass Faraday Glass IR Window Glass Rare Earth Doped Radiation Hardened Anti-Solarization Special Melts are typically made with high performance
More informationOptimized of Erbium-Doped-Fiber Amplifiers (EDFA) Parameters in Hybrid Passive Optical Network (WDM/TDM-PON) Systems with 512 Users
World Applied Sciences Journal (6): 1042-1051, 2015 ISSN 1818-4952 IDOSI Publications, 2015 DOI: 10.5829/idosi.wasj.2015..06.272 Optimized of Erbium-Doped-Fiber Amplifiers (EDFA) Parameters in Hybrid Passive
More informationScintillating Optical Fibers
Scintillating Optical Fibers Plastic Scintillating Fibers Saint-Gobain Crystals manufactures a variety of plastic scintillating, wavelength-shifting and light-transmitting fibers used for research and
More informationOptical Connector Characteristics and Their Impact on System Performance and Reliability
Optical Connector Characteristics and Their Impact on System Performance and Reliability There are a large number of issues that affect the performance of fiber optic connectors in today s networks. These
More informationExperimental study of EDFA Gain-Block for Booster Amplifier at C-band regime
Experimental study of EDFA Gain-Block for Booster Amplifier at C-band regime S.K. Bhadra *, M. Pal, M.C. Paul, R. Sen, P. Biswas, S. Bandyopadhyay, and K. Dasgupta Fibre Optics Laboratory, Central Glass
More informationEfficient multi-mode to single-mode coupling in a photonic lantern
Downloaded from orbit.dtu.dk on: Dec 15, 2017 Efficient multi-mode to single-mode coupling in a photonic lantern Noordegraaf, Danny; Skovgaard, Peter M.; Nielsen, Martin D.; Bland-Hawthorn, Jose Published
More informationOptimization of dual-core and microstructure fiber geometries for dispersion compensation and large mode area
Optimization of dual-core and microstructure fiber geometries for dispersion compensation and large mode area A. Huttunen Department of Electrical and Communications Engineering, Laboratory of Computational
More informationNew Generation High Power Rare-Earth-Doped Phosphate Glass Fiber and Fiber Laser
SUBMIT TO : PHOTONICS WEST 2001 CONFERENCE : [LA03] Solid State Lasers X LASE 2001, High-Power Laser and Applications SESSION CHAIR : Richard Scheps New Generation High Power Rare-Earth-Doped Phosphate
More informationBest Construction Practices and Splicing for Fiber Networks
Best Construction Practices and Splicing for Fiber Networks Simon Salamanca Sr Systems Engineer, Carrier Networks Engineering Services Corning Optical Communications 07/26/2016 Agenda 1 Cable 101 2 Splicing-
More informationPolymer-based optical interconnects using nano-imprint lithography
Polymer-based optical interconnects using nano-imprint lithography Arjen Boersma,Sjoukje Wiegersma Bert Jan Offrein, Jeroen Duis, Jos Delis, Markus Ortsiefer, Geert van Steenberge, MikkoKarppinen, Alfons
More informationHighly-sensitive gas pressure sensor using twincore fiber based in-line Mach-Zehnder interferometer
Highly-sensitive gas pressure sensor using twincore fiber based in-line Mach-Zehnder interferometer Zhengyong Li, 1 Changrui Liao, 1 Yiping Wang, 1,* Lei Xu, 2 Dongning Wang, 3 Xiaopeng Dong, 4 Shen Liu,
More informationIndustrial LSZH Loose Tube, Gel-Free, Double-Jacket Cable
Corning Cable 229.5012 Industrial LSZH Loose Tube, Gel-Free, Corning Cable Systems Industrial LSZH Fiber Optic Cables are designed for industrial building backbones and harsh environments atypical of traditional
More informationOptical Fiber Sensors for Biomedical Applications
Optical Fiber Sensors for Biomedical Applications Xingwei (Vivian) Wang, Ph.D. Assistant Professor Department of Electrical and Computer Engineering University of Massachusetts Lowell Phone: (978) 934-1981
More informationSimulation of Vector Mode Grating Coupler Interfaces for Integrated Optics. Chris Nadovich
Simulation of Vector Mode Grating Coupler Interfaces for Integrated Optics Chris Nadovich Research Objective The novel combination of a forked holographic grating with a Bragg coupler structure to create
More informationCoatings. Ion Assisted Deposition (IAD) process Advance Plasma Source (APS) plasma-ion assisted Deposition. Coatings on Optical Fibers
Anti-Reflection Custom Ion Assisted Deposition (IAD) process Advance Plasma Source (APS) plasma-ion assisted Deposition Anti-Reflection on Optical Fibers OptoSigma supplies a wide selection of optical
More informationInnovative Laser Processing Technologies
Innovative Laser Processing Technologies Reinhard Ferstl Director Sales & Marketing EMEA / Asia Corning Laser Technologies September 21, 2016 2016 Corning Incorporated Corning Market Segments and Additional
More informationTechnical Specification for Single Core 38/66kV TR-XLPE Insulated Underground Cable
Ergon Energy Corporation Limited Technical Specification for Single Core 38/66kV TR-XLPE Insulated Underground Cable ETS04-03-01 Specification ETS04-03-01 Ver 1 Contents 1. Purpose and Scope... 1 1.1 General...
More information>10 11 ohm-cm. ε T 11/ε0=6.7, ε T 33/ε0=8.1; Tan δ<0.001
Beta-Barium Borate Crystal BBO Beta-Barium Borate (β-bab2o4 or BBO) is one of the most excellent NLO crystals. Using a newly improved flux method, AOTK now produces highquality BBO crystal with high optical
More informationOMICS Group signed an agreement with more than International Societies to make healthcare informati on Open Access. OMICS Group Conferences
About Omics Group OMICS Group International through its Open Ac cess Initiative is committed to make genuine an d reliable contributions to the scientific commu nity. OMICS Group hosts over 400 leading-edg
More informationCavity Filters. KIGRE, INC., 100 Marshland Road, Hilton Head, SC 29926, USA PH: FAX: Web:
Cavity Filters Kigre, Inc. s expertise in laser glass technology has led the way in the company s development of a wide range of cavity filter glass for solid-state lasers. Filters are used inside the
More informationHeat-Resistant Thin Optical Fiber for Sensing in High-Temperature Environments
INFORMATION & COMMUNICATIONS Heat-Resistant Thin Optical Fiber for Sensing in High-Temperature Environments Kazuyuki SOHMA* and Tomoyuki HATTORI We have developed a new heat-resistant optical fiber coated
More information2.1 µm CW Raman Laser in GeO 2 Fiber
2.1 µm CW Raman Laser in GeO 2 Fiber B. A. Cumberland, S. V. Popov and J. R. Taylor Femtosecond Optics Group, Imperial College London, SW7 2AZ, United Kingdom O. I. Medvedkov, S. A. Vasiliev, E. M. Dianov
More informationPhil Saunders, spacechannel.org
Guidi with Phil Saunders, spacechannel.org ng Light Long-Range nge Plasmons Aloyse Degiron, Pierre Berini and David R. Smith Long-range surface plasmons are optical modes propagating along metallic circuits
More informationThe study of thermal connecting of telecommunication optical fibers (SiO 2 : GeO 2 ) and EDF (SiO 2 : Al 2 O 3, Er) fibers
BULLETIN OF THE POLISH ACADEMY OF SCIENCES TECHNICAL SCIENCES, Vol. 61, No. 1, 2013 DOI: 10.2478/bpasts-2013-0026 VARIA The study of thermal connecting of telecommunication optical fibers (SiO 2 : GeO
More informationBioinstrumentation Light Sources Lasers or LEDs?
Bioinstrumentation Light Sources Lasers or LEDs? A comprehensive analysis of all the factors involved in designing and building life sciences instrumentation reveals that lasers provide superior performance
More informationnanosilicon Nanophotonics
nanosilicon Nanophotonics Lorenzo Pavesi Universita di Trento Italy Outline Silicon Photonics NanoSilicon photonics Silicon Nanophotonics NanoSilicon Nanophotonics Conclusion Outline Silicon Photonics
More informationSpectroscopy Fiber Optic Probes for In-line Analytical Analysis
Spectroscopy Fiber Optic Probes for In-line Analytical Analysis FlexiSpec product line is a cluster of innovative Fiber Optic Probes and Fiber Probe Couplers designed for in-line analytical analysis in
More informationNTT-AT Optical Adhesives Lineup. Adhesives / Resins and Sealants for Optical Component Assembly
NTT-AT Optical Adhesives Lineup Adhesives / Resins and Sealants for Optical Component Assembly The adhesive technology used in optical communications is one of the key technologies we offer. Ask us anything
More informationHigh Pressure Chemical Vapor Deposition to make Multimaterial Optical Fibers
High Pressure Chemical Vapor Deposition to make Multimaterial Optical Fibers Subhasis Chaudhuri *1 1, 2, 3, John V. Badding 1 Department of Chemistry, Pennsylvania State University, University Park, PA
More informationQuartz Glass for Ultra High Pressure and High Intensity Discharge Lamps. Heraeus Quarzglas
Quartz Glass for Ultra High Pressure and High Intensity Discharge Lamps Heraeus Quarzglas 1 Advanced Material for Highest Demands Improved lighting performance and efficiency, a compact size and long lifetime
More informationAttachment D - Standards for Fiber Deployment (Existing / New) References, Standards, and Codes
Attachment D - Standards for Fiber Deployment (Existing / New) References, Standards, and Codes Standards are based upon the Customer-Owned Outside Plant Design Manual (CO-OSP) produced by BICSI, the Telecommunications
More informationShort Course. Fiber Lasers. Dr. Axel Schülzgen Phone:
Short Course Fiber Lasers Dr. Axel Schülzgen Phone: 407 823 1746 Email: axel@creol.ucf.edu March 6, 2014 Selected Topics - Fiber Lasers, SPRING 2014 1/7/2014 Lecture 1 Introduction Introduction: Fiber
More informationEfficient, broadband and compact metal grating couplers for silicon-on-insulator waveguides
Efficient, broadband and compact metal grating couplers for silicon-on-insulator waveguides Stijn Scheerlinck, Jonathan Schrauwen, Frederik Van Laere, Dirk Taillaert, Dries Van Thourhout and Roel Baets
More informationFiber Optic Panels. 1 st Edition
Fiber Optic Panels 1 st Edition Introduction Cable management is an essential consideration in any successful fiber communications network. The FMT series fiber optic panel enables termination, termination/splicing,
More informationQswitched lasers are gaining more interest because of their ability for various applications in remote sensing, environmental monitoring, micro
90 Qswitched lasers are gaining more interest because of their ability for various applications in remote sensing, environmental monitoring, micro machining, nonlinear frequency generation, laserinduced
More informationLaser Micromachining - Market Focus. Dr. Andrew Kearsley
Laser Micromachining - Market Focus Dr. Andrew Kearsley Oxford Lasers Ltd. Moorbrook Park, Didcot OX11 7HP andrew.kearsley@oxfordlasers.com 5th CIR HVM-UK: South East Conference Harwell, 17 November 2005
More informationHOLLOW-CORE PHOTONIC CRYSTAL FIBER REFRACTIVE INDEX SENSOR BASED ON MODAL INTERFERENCE
HOLLOW-CORE PHOTONIC CRYSTAL FIBER REFRACTIVE INDEX SENSOR BASED ON MODAL INTERFERENCE N. F. Baharin 1, N. Sidek 1, S. M. A. Musa 1, A. I. Azmi 1, A. S. Abdullah 1, M. Y. M. Noor 1 and M. E. M. Roslan
More informationTunable Rare-Earth Doped Fiber Laser
Tunable Rare-Earth Doped Fiber Laser Arturo A. Castillo-Guzman and Romeo Selvas-Aguilar Physical and Mathematical Sciences Research Center (CICFIM) UANL-FCFM San Nicolás de los Garza, Nuevo León, México
More informationSustainable UV-curable low refractive index resins with novel polymers for polymer cladding materials
Sustainable UV-curable low refractive index resins with novel polymers for polymer cladding materials Hiroki Tokoro*, Takako Ishikawa, Nobuyuki Koike, Yohzoh Yamashina DIC Corporation, 12 Yawatakaigan-dori,
More informationAdvances in Polymer Integrated Optics
54 IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS, VOL. 6, NO. 1, JANUARY/FEBRUARY 2000 Advances in Polymer Integrated Optics Louay Eldada, Senior Member, IEEE, and Lawrence W. Shacklette Invited
More informationExpanded Beam Optical Termini
8D Series & ARINC 600 Series ELIOBEAM Fiber Optic Contact Expanded Beam Optical Termini The optical connection requirement for environmentally exposed mating cycles. Robust to contamination Large beam
More informationFIBER OPTIC PROJECT IMPLEMENTATION
FIBER OPTIC PROJECT IMPLEMENTATION Fiber Project Management [Draw your reader in with an engaging abstract. It is typically a short summary of the document. When you re ready to add your content, just
More informationPRECISION OPTICAL FILTERS BY EOSS - ENHANCED OPTICAL SPUTTERING SYSTEM. Fraunhofer
PRECISION OPTICAL FILTERS BY EOSS - ENHANCED OPTICAL SPUTTERING SYSTEM EOSS ENHANCED OPTICAL SPUTTERING SYSTEM Fraunhofer IST, Braunschweig Contact: Dr. M. Vergöhl +49 531 2155 640 EOSS Coating System
More informationPrecision Optical Engineering
Precision Optical Engineering Products: Prisms Windows Mirrors Flats and Master angles Sight Glasses Key Features: Prisms (Contacted, Cemented, AR coated, Mounted) Windows (Flat, wedged, curved, drilled,
More informationDEVELOPMENT OF AN OPTICAL FIBER-BASED CORROSION DETECTION SENSOR BASED ON LASER LIGHT REFLECTION MANJUNATHA SHENOY
DEVELOPMENT OF AN OPTICAL FIBER-BASED CORROSION DETECTION SENSOR BASED ON LASER LIGHT REFLECTION by MANJUNATHA SHENOY Presented to the Faculty of the Graduate School of The University of Texas at Arlington
More informationO Coaxial/Fiber/Microduct Hybrid Buried Cable. Serves businesses in a new commercial serving area. Mitigates future cost of fiber installation
Product Classification E 2 O E2O540JCASS-24CT 24CT MICFIBR-12.7MB DUCT E 2 O Coaxial/Fiber/Microduct Hybrid Buried Cable E 2 O is a solution that enables service providers the ability to bridge HFC networks
More informationLongitudinally Graded Optical Fibers
Clemson University TigerPrints All Theses Theses 5-2013 Longitudinally Graded Optical Fibers Alexander Evert Clemson University, alex.g.evert@gmail.com Follow this and additional works at: http://tigerprints.clemson.edu/all_theses
More informationComparison of cw laser generation in Er 3+, Yb 3+ : glass microchip lasers with different types of glasses
OPTO ELECTRONICS REVIEW 19(4), 491 495 DOI: 10.2478/s11772 011 0048 9 Comparison of cw laser generation in Er 3+, Yb 3+ : glass microchip lasers with different types of glasses J. MŁYŃCZAK *1, K. KOPCZYŃSKI
More informationDETAIL SPECIFICATION SHEET
METRIC MIL-DTL-83526/21 28 August 2008 DETAIL SPECIFICATION SHEET CONNECTOR, FIBER OPTIC, CIRCULAR HERMAPHRODITIC, BULKHEAD, LOW PROFILE WITHOUT STRAIN RELIEF, JAM-NUT MOUNT, 2 AND 4 POSITIONS, EXPANDED
More informationoptosic SiC optics for high-end laser processes
optosic SiC optics for high-end laser processes REFLECTING PERFORMANCE We manufacture high-performance laser galvo scanning mirrors from 10mm to 500mm apertures for single pair consumption with a range
More informationQuartz Glass for Optics
ShinEtsu Quartz Products Co., Ltd. Quartz Glass for Optics Quartz glass is especially superior in its optical characteristics, such as its light transmission characteristics. Also, since quartz glass is
More informationBy Kishor Ramaswamy. Department of Electrical & Computer Engineering. McGill University. Montreal, Quebec, Canada. August 2014
Tm 3+ :ZBLAN Fiber Lasers and their Applications for Spectroscopy By Kishor Ramaswamy Department of Electrical & Computer Engineering McGill University Montreal, Quebec, Canada August 2014 A thesis submitted
More informationArc Fusion Splicing of Photonic Crystal Fibres
Arc Fusion Splicing of Photonic Crystal Fibres 9 Krzysztof Borzycki 1 and Kay Schuster 2 1 National Institute of Telecommunications (NIT) 2 Institute of Photonic Technology (IPHT) 1 Poland 2 Germany 1.
More informationOptical Coatings. Photonics 4 Luxury Coatings , Genève. Dr. Andreas Bächli Head of Optical Coatings at RhySearch, Buchs (SG)
Optical Coatings Photonics 4 Luxury Coatings 21.06.2017, Genève Dr. Andreas Bächli Head of Optical Coatings at RhySearch, Buchs (SG) RhySearch The Research- and Innovation Center in the Rhine Valley RhySearch
More informationENABLE EXTREME PERFORMANCE PHOTONICS
OPTICS ENABLE EXTREME PERFORMANCE PHOTONICS Our CVD diamond has an extremely broad transmission spectrum, exceptional thermal conductivity, vastly increased component lifetime and can be engineered to
More informationPerformance testing of a novel Fibre Optic based vortex flow meter Smart Flow
Performance testing of a novel Fibre Optic based vortex flow meter Smart Flow in high pressure wet steam by R. Jansen, TNO, The Netherlands J. Golliard, TNO, The Netherlands C. Staveley, Smart Fibres Ltd,
More informationA Review of Microfiber and Nanofiber Based Optical Sensors
Send Orders for Reprints to reprints@benthamscience.net 32 The Open Optics Journal, 2013, 7, (Suppl-1, M3) 32-57 A Review of Microfiber and Nanofiber Based Optical Sensors Open Access George Y. Chen, Ming
More information167 W, power scalable ytterbium-doped photonic bandgap fiber amplifier at 1178nm
167 W, power scalable ytterbium-doped photonic bandgap fiber amplifier at 1178nm C. B. Olausson, 1,2,3,* A. Shirakawa, 1 M. Chen, 1 J. K. Lyngsø, 2,3 J. Broeng, 2 K. P. Hansen, 2 A. Bjarklev, 3 and K.
More informationIMRE/ETPL Flagship Project
IMRE/ETPL Flagship Project Nanoparticulate Barrier Films & Gas Permeation Measurement Techniques for Thin Film Solar & Display Application Problems Senthil Ramadas Institute of Materials Research & Engineering
More informationBOROFLOAT & Glass Wafers: A Union of Inspiration & Quality
Home Tech SCHOTT North America, Inc. 553 Shepherdsville Road Louisville, KY 4228 USA Phone: +1 (52) 657-4417 Fax: +1 (52) 966-4976 Email: borofloat@us.schott.com www.us.schott.com/borofloat/wafer BOROFLOAT
More informationDe-agglomerattion of CeO 2 Nanoparticles using the Microfluidizer.
30 Ossipee Road P.O. Box 9101 Newton, MA 06-9101 Phone: 617 969-55 Fax: 617 965-113 www.microfluidicscorp.com De-agglomerattion of CeO Nanoparticles using the Microfluidizer. Prepared by: The Microfluidics
More informationNeodymium Doped Yttrium Orthovanadate (Nd:YVO4)
Neodymium Doped Yttrium Orthovanadate (Nd:YVO4) Nd:YVO4 is the most efficient laser host crystal for diode pumping among the current commercial laser crystals, especially, for low to middle power density.
More informationRN Optical Termination Panel (RN OTP)
RN Optical Termination Panel (RN OTP) General The RN Optical Termination Panel(RN OTP) is specifically designed to house optical splitters while also catering for fiber termination in a single enclosure.
More informationIndustrial Harsh Environment Fiber Cables
Industrial Harsh Environment Fiber Cables The Prysmian Group provides optical fiber cabling solutions designed specifically for use in industrial and harsh environments, such as, mining, aviation, transit,
More informationFs- Using Ultrafast Lasers to Add New Functionality to Glass
An IMI Video Reproduction of Invited Lectures from the 17th University Glass Conference Fs- Using Ultrafast Lasers to Add New Functionality to Glass Denise M. Krol University of California, Davis 17th
More informationCladding with High Power Diode Lasers
White Paper Cladding with High Power Diode Lasers Cladding is a well established process used in a variety of industries for improving the surface and near surface properties (e.g. wear, corrosion or heat
More informationMicro-Precision Coil and Formed Wire Products for the Medical Device Industry
Micro-Precision Coil and Formed Wire Products for the Medical Device Industry Precision Metal Components For Medical Devices Specialized, complex parts and sub-assemblies Extreme diameter and length capabilities
More information