CONTENTS. Table of. About Cable Management System. Technical Specification. Cable Tray System Overview. Cable Tray Staight System. Cable Tray Fittings

Transcription

1

2 Table of CONTENTS About Cable Management System i Technical Specification X Cable Tray System Overview 1 Cable Tray Staight System 4 Cable Tray ittings 6 Cable Ladder System Overview Cable Ladder Straight Overview Cable Ladder ittings Cable Trunking System Overview Cable Trunking Straight Cable Trunking ittings Cable Basket System Overview Cable Basket Straight Cable Cable Basket ittings Metal raming Systems 43 Technical Metal Industrial Co. L.L.C. Tel: +971 (2) ax: +971 (2) P.O. Box: Abu Dhabi U.A.E. tmi@tmico.ae Web: Tel: +971 (2) ax: +971 (2) P.O. Box: Abu Dhabi Tel: +971 (3) ax: +971 (3) P.O. Box: Al Ain Tel: +971 (4) ax: +971 (4) P.O. Box: Dubai Tel: +971 (7) ax: +971 (7) P.O. Box: as Al khaimah Post Bases & I- Beam Support Struts ittings Cable Tray Covers Cable Tray acessories & Connectors Cable Ladder Covers Cable Ladder acessories & Connectors Cable Trunking acessories & Connectors Cable Basket Covers Cable Basket acessories & Connectors Support System asteners

3 About Cable Management System TMI Cable Management System offers you a simple, inexpensive method of routing and supporting all types of light to heavy weight cables. Ideal for all types of commercial, industrial and government applications. Available in different widths, heights, and lengths, complete line of fittings and accessories provide flexibility to meet installation requirements, also available in Hot Dip Galvanized Steel, Aluminum or Stainless Steel built to NEMA VE-1, BS and BS EN standards. Application Cable Management Systems including Cable Trays and Cable Ladders came of age in the mid-forties. They were used to support the new armored shielded power cables that were permitted outside the conduit environment. Utilities and industrial companies initiated the use of mesh and solid trough-style trays for supporting power and control cable. Cable Trays quickly proved their worth as a safe, dependable and cost-effective solution to routing and supporting cables Early on the need for standardization was recognized and NEMA VE-1 Metal Cable Tray standard was published in the early 1960s. NEMA VE-1 and British Stanards has been updated many times; TMI Cable Trays conform to all NEMA VE-1, British Standard, IEC and ASTM standards referring to definitions of Cable Trays, fittings, connectors and accessories. ixing Cable Tray have long been a popular choice for effectively supporting and routing cable in the commercial environment, and faster installation continues to be the most significant factor influencing the enhancement of Cable Tray products. The resistance to chemicals, indoors and outdoors, can best be determined by tests conducted by the user with exposure to the specific conditions for which it is intended. or further information, contact Technical Metal Industrial Co. LLC (TMI). Steel Steel Cable Trays are fabricated from continuous roll-formed structural quality steel. By roll-forming steel, the mechanical properties are increased allowing the used of a lighter gauge steel to carry the required load. This reduces the dead weight that must be carried by the supports and the installers. Using structural quality steel, Technical Metal Industrial Co. LLC (TMI) assures that the material will meet the minimum yield and tensile strengths of applicable ASTM, NEMA and British Standards. The corrosion resistance of steel varies widely with coating and alloy. Stainless Steel Stainless Steel Cable Trays are fabricated from continuous roll-formed AI Type 304, AI Type 316 and AI Type 316L Stainless Steel which belongs to the group called austenitic Stainless Steels. Like carbon steel, they exhibit increased strength when cold worked by roll-forming or bending. Several important conditions could make the use of Stainless Steel imperative. These include long term maintenance cost, corrosion resistance, appearance and locations where product contamination is undesirable. Stainless Steel exhibits stable structural properties such as yield strength and high creep strength at elevated temperatures. Technical Metal Industrial Co. LLC (TMI) Stainless Steel Cable Trays are welded using Stainless Steel welding wire to ensure each weldment exhibits the same corrosion resistance characteristic as the base metal. Localized staining in the weld area or heat affected zone may occur in severe environments. Specialized shielding gases and low carbon materials are used to minimize carbon contamination during welding and reduce staining and stress corrosion. Specify passivity after fabrication as per ASTM A380 to minimize staining, improve aesthetics and further improve corrosion resistance. Zinc Coatings Zinc protects steel in two ways. irst it protects the steel as a coating and second as a sacrificial anode to repair bare areas such as cut edges, scratches, and gouges. The corrosion protection of zinc is directly related to its thickness and the environment. This means a 0.2 mil coating will last twice as long as a 0.1 mil coating in the same environment. Aluminum Aluminum Cable Trays are fabricated from structural grade copper free (marine grade) Aluminum extrusions. Aluminum s excellent corrosion resistance is due to its ability to form an aluminum oxide film that when scratched reforms the original protective film. Aluminum has excellent resistance to weathering in most outdoor applications. Aluminum Cable Tray has excellent corrosion resistance in many chemical environments. Typically, Aluminum Cable Trays can perform indefinitely, with little or no degradation over time, making it ideal for many chemical and marine environments. Electro Galvanized Zinc Elecrogalvanized Zinc (also known as Zinc Plated or electroplated) is the process by which a coating of zinc is deposited on the steel by electro-deposition from a bath of zinc salts. A rating of SC3, TMI Standard, provides a minimum zinc coating thickness of 0.5 mils (excluding threaded rod, which is SC1 = 0.2mils) i II

4 When exposed to air and moisture, zinc forms a tough, adherent, protective film consisting of a mixture of zinc oxides, hydroxides, and carbonates. This film is in itself a barrier coating which slows subsequent corrosive attack on the zinc. This coating is usually recommended for indoor use in relatively dry areas, as it provides ninety six hours protection in salt spray testing per ASTM B117. Chromium / Zinc Chromium / Zinc is a corrosion resistant composition, which was developed to protect fastener and small bulk items for automotive use. The coating applications have since been extended to larger parts and other markets. Chromium/Zinc composition is an aqueous coating dispersion containing chromium, proprietary organic, and zinc flake. This finish provides 0 hours protection in salt spray testing as per ASTM B 117, exceeding NEMA VE-1 requirements by %. Pre-Galvanized Zinc (Mill Galvanized, Hot Dip Mill Galvanized or Continuous Hot Dip Galvanized) Pre-Galvanized steel is produced by coating coils of sheet steel with zinc by continuously rolling the material through molten zinc at the mills. This is also known as mill galvanized or hot dip mil galvanized. These coils are then slit to size and fabricated by roll forming, shearing, punching, or forming to produce Technical Metal Industrial Co. LLC (TMI) pre-galvanized Cable Tray products(), or HDGB ( Hot Dip Galavanized Before abrication) The G90 specification call for a coating of 90 ounces of zinc per square foot of steel. This results in a coating of 45 ounces per square foot on each side of the sheet. This is important when comparing this finish to hot dip galvanized after fabrication. During fabrication, cut edge and welded areas are not normally zinc coated; however, the zinc near the uncoated metal becomes a sacrificial anode to protect the bare areas after short period of time. To further insure a quality product, Technical Metal Industrial Co. LLC (TMI) welds all pre-galvanized Cable Trays with a silicon bronze welding wire allowing only a small heat affected zone to be exposed. This small area quickly repairs itself by the same process as cut edges. Hot Dip Galvanized After abrication (Hot Dip Galvanized or Batch Hot Dip Galvanized) Hot Dip Galvanized after abrication Cable Tray products are fabricated from steel and then completely immersed in a bath of molten zinc. A metallic bond occurs resulting in a zinc coating that completely coats all surfaces, including edges and welds. Another advantage of this method is coating thickness. Cable Trays Hot Dip Galvanized After abrication (HDGA) have a minimum thickness in accordance to ASTM A123 and BS 1461 (updated standard of BS 729). The zinc thickness is controlled by several factors 2 of which are the amount of time each part is immersed in the molten zinc bath, as well as, the speed of dipping and removal. The layer of zinc which bonds to steel provides a dual protection against corrosion. It protects first as an overall barrier coating. If this coating happens to be scratched or gouged, zinc s secondary defense is called upon to protect the steel by galvanic action. Hot Dip Galvanized after abrication is recommended for prolonged outdoor exposure and will protect steel for many years in most outdoor environments and in many aggressive industrial environments. Technical Metal Industrial (TMI) follows the steps below for its Hot Dipped Galvanized Process which is in compliance with ASTM A123 and BS 1461(updated version of BS 729): 1. All materials received for Hot Dip Galvanizing are checked for adequacy (or Galvanizing) and holes drilled in confined spaces as per the International Standards BS 1461, ASTM 123 and 153 to ensure the immersion of the structure in the Zinc Bath and to allow the Zinc to reach the internal surfaces of the Steel. The material is then forwarded to the appropriate cleaning equipment to remove dirt, rust and paint. 2. The cleaned steel is delivered for Chemical Pre-treatment starting with the degreasing and pickling operation where it is immersed in one of the six tanks of Hydrochloric Acid (10-15%) solution for a minimum period of 20 Minutes. 3. After pickling, the steel is rinsed in one of the two fresh water tanks then immersed in running water tank to ensure the complete removal of the residual acid and iron salts from the operation. 4. The Steel is then lifted to the fluxing tank where it is immersed for 3-5 in an aqueous flux solution of Zinc Ammonium Chloride ( Zn NH4 Cl3), 40% Solution, i.e 28 Degrees Be, to ensure full chemical bonding between Steel and Zinc during the Galvanizing process. III IV

5 5. After fluxing the steel is dried and preheated with hot dry air in double heating oven. 6. The Steel is now ready for galvanizing and is dipped in the galvanizing gath holding more than 290 Tonnes of % SHG ZINC (LME registered) at temperatures of Degrees Celsius. Minimum dipping time is 3 minutes for full chemical bonding between Zinc and Steel. 7. Prior to immersion of steel in the galvanizing bath, The molten Zinc surface is Skimmed clean of Zinc Ash to avoid residual coming in contact with Steel during dipping, The same process is repeated before removing the steel from the Galvanizing bath. 8. After Hot Dip Galvanizing and depending on the thickness of steel, the Steel is quenched in water before final inspection. Pre-delivery checks are conducted by QC Engineer on the surface and general finish of the galvanized surface. Instructions are given for cleaning (Zinc esiduals) and rectification where necessary. Painting Cable Tray It is typically more cost effective to use an Aluminum or Pre-Galvanized Steel Cable Tray and paint it after installation, along with the other un-painted building components. Painted Cable Tray is often used in open ceiling applications where all the overhead equipment and structure is painted the same color. In this type of application, additional painting is often necessary in the field, after installation, to ensure all of the supporting components, such as hanger rods, clamps and attaching harware have been painted uniformly. Pre-painted Cable Tray interferes with common grounding practices, requiring the paint to be removed at splice locations, and / or the addition of bonding jumpers that were otherwise unnecessary. This additional field modification not only increases the installation cost, but causes potential damage to the special painted finish. Consult painting contractor for proper surface preparation. Special Paint Technical Metal Industrial Co. L.L.C. (TMI) Cable Tray and support can be painted or primed to meet the customer s requirements. Technical Metal Industrial Co. L.L.C. (TMI) has several colors available, consult the factory. Atmospheric Corrosion Atmospheric corrosion occurs when metal is exposed to airborne liquids, solid or gases. Some sources of atmospheric corrosion are moisture, salt, dirt and sulphuric acid. This form of corrosion is typically worse outdoors, especially near marine environments. Chemical Corrosion Chemical corrosion takes place when metal comes in direct contact with corrosive media. Some factors which affect the severity of chemical corrosion include: chemical concentration level, duration of contact, frequency of washing and operating temperature. Storage Corrosion Wet storage stain (White ust) is caused by the entrapment of moisture between surfaces of closely packed and poorly ventilated material for an extended period. Wet storage stain is usually superficial, having no affect on the properties of the metal. Light staining normally disappears with weathering. Medium to heavy build up should be removed in order to allow the formation of normal protective film. Proper handling and storage will help to assure stain-fee material. If product arrives wet, it should be unpacked and dried before storage. Dry material should be stored in a well ventilated low moisture environment to avoid condensation formation. Outdoor storage is undesirable, and should be avoided whenever possible. Galvanic Corrosion Galvanic Corrosion occurs when two or more dissimilar metals are in contacts in the presence of an electrolyte (ie. Moisture). An electrolyte cell is created and the metals form an anode or a cathode depending on their relative position on the Galvanic Series Table. The anodic material will be the one to corrode. Whether a material is anodic depends on the relative position of the material. or example: If zinc and steel are in contact, the zinc acts as the anode and will corrode; the steel acts as the cathode, and will be protected. If steel and copper are in contact, the steel is now the anode and will corrode. V If a non-standard color is required the following information needs to be specified. 1. Type of material preparation (primer, etc.) 2. Type of paint manufacturer and paint number or type of paint with chip. 3. Dry film thickness. Corrosion All metal surfaces are affected by corrosion. Depending on the physical properties of the metal and the environment to which it is exposed, chemical or Electromechnical corrosion may occur. The rate at which galvanic corrosion occurs depends on several factors: The amount and concentration of electrolyte present in an indoor, dry environment will have little or no galvanic corrosion compared to a wet atmosphere. 1. The relative size of the materials: A small amount of anodic material in contact with a large cathodic material will result in greater corrosion. Likewise, a large anode in contact with a small cathode will decrease the rate of attack. 2. The relative position on the Galvanic Series Table: The further apart in the Galvanic Series Table, the greater the potential for corrosion of the anodic material. VI

6 Galvanic Series in Sea Water More Anodic Anodic End Magnesium Magnesium Alloys Zinc Beryllium Aluminum- Zinc Alloy (7000 series) Aluminum (0 series) Aluminum Magnesium- Silicon Alloys (0 series) Cadmium Aluminum- Copper Alloys (0 series) Cast Iron, Wrought Iron, Mild Steel Austenitic Nickel Cast Iron Type 410 Stainless Steel (active) Type 316 Stainless Steel (active) Type 304 Stainless Steel (active) Naval Brass, Yellow Brass, ed Brass Tin Copper Lead Tin Solders Admiralty Brass, Aluminum Brass Manganese Bronze Silicon Bronze Tin Bronze Type 410 Stainless Steel (passive) Nickel- Silver Copper Nickel Alloys Lead Nickel Aluminum Bronze Silver Solder Nickel Silver Type 316 Stainless Steel (passive) Type 304 Stainless Steel (passive) Incoloy 825 Hastelloy B Titanium Hastelloy C Platinum Graphite Cathodic End = ecommended VII = May be used under some conditions N = Not ecommended -- = Information not available The Corrosion data given in this table is for general comparison only. (eference Corrosion esistance Tables). The presence of contaminates in chemical environments can greatly affect the corrosion rate of any material. Technical Metal Industrial Co. LLC (TMI) strongly suggest that field service tests or simulated laboratory tests using actual environmental conditions be conducted in order to determine the proper materials and finishes to be selected. VIII

7 Technical Specification Corrosion Guide = ecommended Cable Tray Material Chemical Aluminum Stainless Type 304 Stainless Type 316 Cold Warm Hot Cold Warm Hot Cold Warm Hot Lactic Acid 10% Lead Acetate 5% Magnesium Chloride 1% Magnesium Hydroxide Magnesium Nitrate 5% Nickel Chloride Nitric Acid 15% Oleic Acid Oxalic Acid 10% Phenol CP Phosphoric Acid % Potassium Bromide % Potassium Carbonate % Potassium Choride5% Potassium Dichromate Potassium Hydroxide % Potassium Nitrate % Potassium Sulfate 5% Propyl Alcohol Sodium Acetate 20% Sodium Bisulfate 10% Sodium Borate Sodium Carbonate 18% Sodium Chloride 5% Sodium Hydroxide % Sodium Hypochlorite 5% Sodium Nitrate % Sodium Nitrite % Sodium Sulfate % Sodium Thiosulfate Sulfur Dioxide (Dry) Sulfuric Acid 5% Sulfuric Acid 10% Sulfuric Acid % Sulfuric Acid -98% Sulfuric Acid 98-% Tannic Acid 10 & % Tartaric Acid 10 & % Vinegar Zinc Chloride 5 & 20% Zinc Nitrate Zinc Sulfate = May be used under some conditions N = Not ecommended -- = Information not available N N N N N N N N N N N N N N N -- N N N N N N N N N N N N N N N N N N -- N N N N N -- The Corrosion data given in this table is for general comparison only. (eference Corrosion esistance Tables). The presence of contaminates in chemical environments can greatly affect the corrosion rate of any material. N N N -- N N N -- N N N N N N N N N N -- N N N N N N N N N -- N N N N N N N N N N N aw Material Standards Mild Steel Mild Steel: BS EN Galvanized Steel Stainless Steel Aluminum Hot dipped Galvanizing (After fabrication) to Powder Coating to Epoxy Coating Manufacturing Standards Cable Tray System Nema VE 1 BS / IEC Cable Ladder System Nema VE 1 BS / IEC Cable Trunking System BS 085 Cable Basket System BS EN 10346:9 (formerly BS EN 10142:1991, formely BS 4678) coating type: Z120, Z180 & Z2 ASTM A 653/A653M BS EN 88-2:5 (which was direct equivalent to formerly BS 1449:Part 2:1983 in Grade 304 2B INISH) ASTM A240/A240M in Grade 304 2B INISH ASTM B 209 M BS EN ISO 1461:1999 (formerly BS 729) ASTM A123/A123 M, A 153/A153 M BS 6497:1984 As per manufacturer standard. Technical Metal Industrial Co. LLC (TMI) strongly suggest that field service tests or simulated laboratory tests using actual environmental conditions be conducted in order to determine the proper materials and finishes to be selected. IX X

8 Cable Tray System Overview External iser Straight educer Cable Tray Straight Internal iser Tee Horizontal Bend 90 0 Bend 45 0 Cross Horizontal 1 2

9 Cable Trays Straight Cable Tray Straight - Ordering Guide (CT) Plain Type Tray Type Material Type Cable Tray inishing HDG AL SS4 SS6 SS6L C.T TYPE CT-HD-I Length of Tray Steel Thickness Side Height emarks SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP SP / 25 / / 25 /// /// /// /// /// // // // / / / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness * Standard Couplers size is 180mm x side height of Tray. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Cable Tray Length is TMI manufacturing standard, other Lengths can be provided upon request. LENG Inside lange () Outside lange (SO) Plain Type(SP) 90 0 Outside Type(SN) Width * Length available are standard, other length (0 mm) are available as special request. Cable Tray ittings - Ordering Guide (CT) Outside 90 0 Edge Type Material Type Cable Tray inishing HDG AL SS4 SS6 SS6L ittings Internal iser (I) Cross Horizontal () Tee Horizontal () Bend 90 0 () Bend 45 0 () educer Straight (S) educer left (L) educer ight () Internal iser (I) External iser (E) Unequal Tee (UT) CT-HD-I---2-S adius/ Standard...etc Steel Thickness Side Height Width emarks Tray Type SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO SO / / 25 /// /// /// /// // // // / / / / * Standard Couplers size is 180mm x side height of Tray. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Cable Tray Length is TMI manufacturing standard, other Lengths can be provided upon request. * Length available are standard, other length (0 mm) are available as special request. Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness LENG 3 4

10 Inside lange Type Tray Type Cable Trays ittings Cross Horizontal emarks / / 25 /// /// /// /// // // // / / / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness * Standard Couplers size is 180mm x side height of Tray. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Cable Tray Length is TMI manufacturing standard, other Lengths can be provided upon request. * Length available are standard, other length (0 mm) are available as special request. LENG emarks Tray Type Accessory / 25 /// / / 25 /// /// /// /// // // // / / / / * Standard Couplers size is 180mm x side height of Tray. ( eference page * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. ef. * Model represents the inside flange type. Other flanges available upon request as per below. * Equal cross A=B=C=D=Width. * Unequal cross A,B,C,D will be as per specification. Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness A B C Outside lange (SO) Outside 90 0 (SN) Plain (SP) Inside lange () D Outside lange Type Tee Horizontal emarks Tray Type SN SN SN SN SN SN SN SN SN SN SN SN SN SN SN SN / / 25 /// /// /// /// // // // / / / / * Standard Couplers size is 180mm x side height of Tray. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Cable Tray Length is TMI manufacturing standard, other Lengths can be provided upon request. * Length available are standard, other length (0 mm) are available as special request. Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness LENG emarks Tray Type Accessory / 25 /// / / 25 /// /// /// /// // // // / / / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness * Standard Couplers size is 180mm x side height of Tray. ( eference page * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. ef. * Model represents the inside flange type. Other flanges available upon request as per below. * Equal tee A=B=C=Width. * Unequal tee A,B,C will be as per specification. Outside lange (SO) Outside 90 0 (SN) Plain (SP) Inside lange () A B C SLOT 20x7 5 6

11 Bend 45 0 educer Straight Tray Type Accessory Tray Type Accessory emarks / 25 /// / / 25 /// /// /// /// // // // / / / / * Standard Couplers size is 180mm x side height of Tray. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Model represents the inside flange type. Other flanges available upon request as per below. Outside lange (SO) Outside 90 0 (SN) Plain (SP) Inside lange () Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness S S S S S S S S S S S S S S S S S emarks / 25 / / 25 /// /// /// /// /// // // // / / / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness * Standard Couplers size is 180mm x side height of Tray. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Model represents the inside flange type. Other flanges available upon request as per below. * A= mm to 0 mm and B= mm to 1 mm, B will remain always greater than A. Outside lange (SO) Outside 90 0 (SN) Plain (SN) Inside lange () A Bend 90 0 educer Left B Tray Type Accessory Tray Type Accessory / 25 / / 25 /// /// /// /// /// // // // / / / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness L L L L L L L L L L L L L L L L L / 25 / / 25 /// /// /// /// /// // // // / / / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness emarks emarks A * Standard Couplers size is 180mm x side height of Tray. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Model represents the inside flange type. Other flanges available upon request as per below. Outside lange (SO) Outside 90 0 (SN) Plain (SP) Inside lange () * Standard Couplers size is 180mm x side height of Tray. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Model represents the inside flange type. Other flanges available upon request as per below. * A= mm to 0 mm and B= mm to 1 mm, B will remain always greater than A. Outside lange (SO) Outside 90 0 (SO) Plain (SN) Inside lange () B 7 8

12 educer ight Internal iser Tray Type Accessory X y / 25 / / 25 /// /// /// /// /// // // // / / / / emarks Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness A emarks Tray Type Accessory I I I I I I I I I I I I I I I I I / 25 / / 25 /// /// /// /// /// // // // / / / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness * Standard Couplers size is 180mm x side height of Tray. * Standard Couplers size is 180mm x side height of Tray * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Model represents the inside flange type. Other flanges available upon request as per below. * A= mm to 0 mm and B= mm to 1 mm, B will remain always greater than A. Outside lange (SO) Outside 90 0 (SO) Plain (SN) Inside lange () * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer * Model represents the inside flange type. Other flanges available upon request as per below. Outside lange (SO) Outside 90 0 (SN) Plain (SP) Inside lange () External iser B Tray Type Accessory E E E E E E E E E E E E E E E E E / 25 / / 25 /// /// /// /// /// // // // / / / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness emarks * Standard Couplers size is 180mm x side height of Tray. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Model represents the inside flange type. Other flanges available upon request as per below. Outside lange (SO) Outside 90 0 (SN) Plain (SP) Inside lange () 9 10

13 Cable Ladder System Overview Straight Ladder Bend 90 Tee Horizontal Internal iser Cross Horizontal Straight Ladder Straight educer Tee Horizontal Sub Divider Bend

14 Cable Ladder Straight Cable Ladder Straight - Ordering Guide (CL) NC Type Material Type Cable Ladder inishing HDG AL SS4 SS6 SS6L C.L Type CL-HD-I Length of Ladder Steel Thickness Side Height Tray Type emarks NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC NC / // * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness 341 LENG NC Type(NC) OC Type(OC) Type () Z Type (Z) Width OC Type Cable Ladder ittings - Ordering Guide (CL) Material Type Cable Ladder inishing HDG AL SS4 SS6 SS6L CL-HD-I---2-S adius/ Standard...etc Steel Thickness Tray Type OC OC OC OC OC OC OC OC OC OC OC OC OC OC OC OC OC / // emarks Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness LENG ittings Internal iser (I) Cross Horizontal () Tee Horizontal () Bend 90 0 () Bend 45 0 () educer Straight (S) educer left (L) educer ight () Internal iser (I) External iser (E) Unequal Tee (UT) Side Height Width * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer

15 Cable Ladder-ittings Type Cross Horizontal Tray Type / // emarks * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness 341 LENG emarks Tray Type Accessory / // * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the type. Other flanges available upon request as per below. * Equal cross A=B=C=D=Width. * Unequal cross A,B,C,D will be as per specification. Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness A B C NC Type (NC) OC Type (OC) Type () Z Type (Z) D Z Type Tee Horizontal Tray Type emarks Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z / // * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness 341 LENG emarks Tray Type Accessory / // * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the type. Other flanges available upon request as per below. * Equal cross A=B=C=D=Width. * Unequal cross A,B,C,D will be as per specification. Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness A B NC Type (NC) OC Type (OC) Type () Z Type (Z) C 15 16

16 Bend 45 0 educer Straight Tray Type Accessory Tray Type Accessory / // emarks Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness S S S S S S S S S S S S S S S S S / // emarks Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness A * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the type. Other flanges available upon request as per below. NC Type (NC) OC Type (OC) Type () Z Type (Z) * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the type. Other flanges available upon request as per below. * A= mm to 0 mm and B= mm to 1 mm, B will remain always greater than A. NC Type (NC) OC Type (OC) Type () Z Type (Z) B Bend 90 0 educer ight Tray Type Accessory Tray Type Accessory / // emarks Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness / // emarks Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness A * Useful depth is 25mm less than height in the schedule above. * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the type. Other flanges available upon request as per below. NC Type (NC) OC Type (OC) Type () Z Type (Z) * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the type. Other flanges available upon request as per below. * A= mm to 0 mm and B= mm to 1 mm, B will remain always greater than A. NC Type (NC) OC Type (OC) Type () Z Type (Z) B 17 18

17 educer Left Internal iser Tray Type Accessory S S S S S S S S S S S S S S S S S X y / // Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness A Tray Type Accessory I I I I I I I I I I I I I I I I I / // Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness emarks emarks * Useful depth is 25mm less than height in the schedule above. * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the type. Other flanges available upon request as per below. * A= mm to 0 mm and B= mm to 1 mm, B will remain always greater than A. NC Type (NC) OC Type (OC) Type () Z Type (Z) B * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the type. Other flanges available upon request as per below. NC Type (NC) OC Type (OC) Type () Z Type (Z) External iser Sub Divider Tray Type Accessory E E E E E E E E E E E E E E E E E / // Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness Tray Type Accessory X y UT UT UT UT UT UT UT UT UT UT UT UT UT UT UT / 25 / / 25 UT UT Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness emarks * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the type. Other flanges available upon request as per below. NC Type (NC) OC Type (OC) Type () Z Type (Z) emarks * Useful depth is 25mm less than height in the schedule above. * Standard Couplers size is mm x side height of Ladder. * Standard Hardware M8 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the type. Other flanges available upon request as per below. NC Type (NC) OC Type (OC) Type () Z Type (Z) 19 20

18 Cable Trunking System Overview Elbow 45 0 Straight Trunking Elbow Bend Inside Cover 90 0 Bend Inside Cover Straight educer Equal Cross Equal Tee Elbow 45 0 Straight educer Elbow 90 0

19 Cable Trunking Straight Cable Trunking Straight - Ordering Guide (C) Type Tray Type Material Type Cable Trunking C-HD-I Length of Trunking emarks 1 2 / / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness inishing HDG SS4 AL Steel Thickness * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Cable Trunking Length is TMI manufacturing standard, other Lengths can be provided upon request. C. TYPE Side Height Type () DTN Type (DTN) MTN Type (MTN) Width Cable Trunkng ittings - Ordering Guide (C) SLOT 12x7 C-HD-I---2 Material Type Cable Trunking Steel Thickness inishing HDG AL SS4 LENG ittings Bend 90 0 ( + TC,IC, OC) Bend 45 0 ( + TC,IC, OC) Tee Horizontal ( + TC,IC, OC) Cross Top Cover (TC) educer Straight (S) Ply Mouth (CTIC) Side Height Width 23 24

20 DTN Type MTN Type Tray Type Tray Type DTN DTN DTN DTN 1 / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Cable Trunking Length is TMI manufacturing standard, other Lengths can be provided upon request. LENG MTN MTN MTN MTN 1 4 Light Duty is / mm Thickness * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M6 Bolts for Cable Tray with M6 Nuts and Washer. * Cable Trunking Length is TMI manufacturing standard, other Lengths can be provided upon request. SLOT 12x7 LENG LENG Medium Duty is mm Thickness Heavy Duty is / mm Thickness SLOT 12x

21 Cable Trunking- ittings Bend 90 0 Top Cover Bend 90 0 Outside Cover Tray Type Accessory Tray Type Accessory TC TC TC TC TC TC TC TC 1 2 / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness OC OC OC OC OC OC OC OC 1 2 / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness emarks emarks * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M8 Bolts for Cable Tray with M6 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M8 Bolts for Cable Tray with M6 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. SLOT 12x7 Type DTN Type MTN Type Type DTN Type MTN Type SLOT 12x7 Bend 90 0 Inside Cover Tray Type Accessory IC IC IC IC IC IC IC IC 1 2 / / emarks Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness Bend 45 0 Top Cover Tray Type Accessory TC TC TC TC TC TC TC TC 1 2 / / emarks Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M8 Bolts for Cable Tray with M6 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. Type DTN Type MTN Type * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M8 Bolts for Cable Tray with M6 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. Type DTN Type MTN Type SLOT 12x7 SLOT 12x

22 Bend 45 0 Inside Cover Tee Top Cover Tray Type Accessory Tray Type Accessory IC IC IC IC IC IC IC IC 1 2 / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness CTTC CTTC CTTC CTTC CTTC CTTC CTTC CTTC 1 2 / / Light Duty is / mm Thickness emarks * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M6 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. Type DTN Type MTN Type SLOT 12x7 Medium Duty is mm Thickness Heavy Duty is / mm Thickness emarks * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M6 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. Type DTN Type MTN Type SLOT 12x7 Bend 45 0 Outside Cover Tray Type Accessory Tee Inside Cover emarks OC OC OC OC OC OC OC OC 1 2 / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness Tray Type Accessory CTIC CTIC CTIC CTIC CTIC CTIC CTIC CTIC 1 2 / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M6 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. Type DTN Type MTN Type emarks * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M6 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. SLOT 12x7 Type DTN Type MTN Type SLOT 12x

23 Tee Outside Cover educer Straight Tray Type Accessory CTOC CTOC CTOC CTOC CTOC CTOC CTOC CTOC 1 2 / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness Tray Type Accessory S S S S S S S S X Y / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness emarks * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M6 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. emarks * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M6 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. Type DTN Type MTN Type Type DTN Type MTN Type SLOT12x7 Cross Top Cover Tray Type Accessory Ply Mouth TC TC TC TC TC TC TC TC 1 2 / / emarks * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M6 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. Type DTN Type MTN Type Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness Tray Type Accessory CTIC CTIC CTIC CTIC CTIC CTIC CTIC CTIC 1 2 / / emarks * Standard Couplers size is mm x side height of Trunking. * Standard Hardware M6 Bolts for Cable Tray with M8 Nuts and Washer. * Model represents the MTN type. Other flanges available upon request as per below. Type DTN Type MTN Type Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness SLOT 12x7 SLOT 12x

24 Cable Basket System Overview educer Ight Bend 45 0 External iser Tee Horizontal educer Left Straight Cable Basket Bend 90 0 Cross Horizontal Offset horizontal Down Internal iser educer Straight Offset horizontal Up 33 34

25 Cable Basket Sraight Cable Basket Straight - Ordering Guide () Height 30 -HD-I Tray Type Wire Diameter mm /ZN /ZN /ZN Material Type Cable Basket Length of Basket Height 55 inishing HDG ZN Wire Diameter Tray Type Wire Diameter mm /ZN /ZN /ZN /ZN /ZN /ZN /ZN /ZN C.B TYPE Height 30 Height 55 Height Side Height Width Height Tray Type Wire Diameter mm /ZN /ZN /ZN /ZN /ZN /ZN Construction Drawing 35 36

26 Cable Basket-ittings The Cable Basket Straight Sections along with couplers and hardwares will be supplied to clients as per specification required. ittings will be fabricated on site by clients in accordance with drawings below. Elbow Horizontal 45 0 Cross Horizontal emarks * The elbow horizontal 45 0 is made by two straight cable basket sections. * It is joined by couplers and brackets and available in kits along with the straight sections. * All width available according to the straight section ( mm upto mm). emarks * The cross horizontal is made by two straight cable basket sections. * It is joined by couplers and brackets and available in kits along with the straight sections. * All width available according to the straight section. ( mm upto mm). Elbow Horizontal 90 0 Tee Horizontal emarks * The Tee horizontal is made by two straight cable basket sections. * It is joined by couplers and brackets and available in kits along with the straight sections. * All width available according to the straight section ( mm upto mm). emarks * The elbow horizontal 90 0 is made by two straight cable basket sections. * It is joined by couplers and brackets and available in kits along with the straight sections. * All width available according to the straight section ( mm upto mm)

27 educer Straight educer Left emarks * The reducer straight is made by two straight cable basket sections. * It is joined by couplers and brackets and available in kits along with the straight sections. * All width available according to the straight section ( mm upto mm). emarks * The reducer left is made by two straight cable basket sections. * It is joined by couplers and brackets and available in kits along with the straight sections. * All width available according to the straight section ( mm upto mm). External iser educer ight emarks * The reducer right is made by two straight cable basket sections. * It is joined by couplers and brackets and available in kits along with the straight sections. * All width available according to the straight section ( mm upto mm). emarks * The external riser is made by one straight cable basket sections. * It is joined by couplers and brackets and available in kits along with the straight sections. * All width available according to the straight section ( mm upto mm)

28 Internal iser Offset Horizontal Up emarks * The internal is made by one straight cable basket sections. * It is joined by couplers and brackets and available in kits along with the straight sections. * All width available according to the straight section ( mm upto mm). emarks * The offset horizontal up is made by one straight cable basket sections. * It is joined by couplers and brackets and available in kits along with the straight sections. * All width available according to the straight section ( mm upto mm). Offset Horizontal Down emarks * The offset horizontal down is made by one straight cable basket sections. * It is joined by couplers and brackets and available in kits along with the straight sections. * All width available according to the straight section ( mm upto mm)

29 Metal raming Systems - Covers - Accessories - Hardware

30 Metal raming Systems Plain Type 21 Slotted Type 21 Material Type /HD/AL CS P // 0/0 Material Type /HD/AL CS S // 0/0 emarks emarks Plain Type 41 Slotted Type 41 Material Type /HD/AL CS P // 0/0 Material Type /HD/AL CS S // 0/0 emarks emarks Double Plain Type 21 Double Slotted Type 21 Material Type /HD/AL CS DP // 0/0 Material Type /HD/AL CS DS // 0/0 emarks emarks Double Plain Type 41 Double Slotted Type 41 Material Type /HD/AL CS DP // 0/0 Material Type /HD/AL CS DS // 0/0 emarks emarks 43 44

31 Ordering Guide - Metal raming Systrem Material Type CACT CAPSC CASSC CAPDC CASDC inishing HDG AL Cantilever Arm Cable Tray CASDC-HD Steel Thickness Length of C.A Accessory (D) 82 (D) Cantilever Arm Slotted Single Channel Accessory Length of Cantilever Arm Width CASSC CASSC CASSC CASSC CASSC CASSC CASSC CASSC CASSC CASSC CASSC CASSC CASSC CASSC CASSC CASSC CASSC emarks * Base post Thickness is 6 mm. * Other thickness avilable upon request. Cantilever Arm Plain Double Channel Accessory Length of Cantilever Arm Width CACT CACT CACT CACT CACT CACT CACT CACT CACT CACT CACT CACT CACT CACT CACT CACT CACT Cantilever Arm Plain Single Channel emarks Accessory Length of Cantilever Arm Width CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC CAPSC * Base post Thickness is 6 mm. * Other thickness avilable upon request Accessory Length of Cantilever Arm Width CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC CAPDC Cantilever Arm Slotted Double Channel Accessory Length of Cantilever Arm Width CASDC CASDC CASDC CASDC CASDC CASDC CASDC CASDC CASDC CASDC CASDC CASDC CASDC CASDC CASDC CASDC CASDC emarks * Base post Thickness is 6 mm. * Other thickness avilable upon request. emarks * Base post Thickness is 6 mm. * Other thickness avilable upon request.

32 Post Bases & I- Beam Support PB Base post 2 holes PB Base post 4 holes Type Type BP2H-101 BPD4H-108 emarks * Manufacturing standard Base steel thickness is 6mm. * Base plate steel other thicknesses available upon request. emarks * Manufacturing standard Base steel thickness is 6mm. * Base plate steel other thicknesses available upon request. PB Base post 2 holes PB Base post 4 holes Type Type BP2H-102 BP4H-105 emarks * Manufacturing standard Base steel thickness is 6mm. * Base plate steel other thicknesses available upon request. emarks * Manufacturing standard Base steel thickness is 6mm. * Base plate steel other thicknesses available upon request. PB Base post 2 holes double channel PB Base post 4 holes Type BPD2H-103 emarks * Manufacturing standard Base steel thickness is 6mm. * Base plate steel other thicknesses available upon request. Type BP4H-106 emarks * Manufacturing standard Base steel thickness is 6mm. * Base plate steel other thicknesses available upon request. PB Base post 2 holesdouble channel PB Base post 4 holes double channel Type BPD2H-104 emarks * Manufacturing standard Base steel thickness is 6mm. * Base plate steel other thicknesses available upon request. Type BPD4H-107 emarks * Manufacturing standard Base steel thickness is 6mm. * Base plate steel other thicknesses available upon request

33 Struts ittings S Square Washer S U-connector Type Size Type Size SS101 M6/M8/M10/M12 SS106 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. S Double hole splice plate S Corner plate Type Size SS102 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. Type Size SS107 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. S Triple hole splice plate S Tee plate Type Size SS103 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. Type Size SS108 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. S hole splice plate S Cross plate Type Size SS104 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. Type Size SS109 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. S U-connector DSP S Gusset plate corner Type Size SS105 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. Type Size SS110 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. 49

34 S Gusset plate tee S Beam clamp Type Size Type Size SS111 M6/M8/M10/M12 SS116 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. S Corner angle 2 holes S -117 Universal bracket Type Size Type Size SS112 M6/M8/M10/M12 SS117 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. S Corner angle 3 hole S Bend angle bracket Type Size SS113 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. Type Size SS118 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. S Corner angle 4 holes S Tee angle Type Size SS114 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. Type Size SS119 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. S -115 Beam clamp type S Gusset angle bracket Type Size SS115 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. Type Size SS120 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm

35 S Corner connection right hand S Strut connector Type Size SS121 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. Type Size SS126 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. * This strut fittings will be slotted (diamension of slot 20 mmx 7 mm). S Corner connection left hand Type Size SS122 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. S U-clamp-21 S Strut connector 90º Type Size SS127 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. * This strut fittings will be slotted (diamension of slot 20 mmx 7 mm). Type Size SS123 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. S U-clamp-41 Type Size SS124 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. S Strut connector tee Type Size SS128 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. * This strut fittings will be slotted (diamension of slot 20 mmx 7 mm). S U-clamp-DSP S -129 Strut connector cross Type Size Type Size SS125 M6/M8/M10/M12 SS129 M6/M8/M10/M12 emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. emarks * Manufacturing standard of Strut ittings in accordance with above table, Thickness is 6mm. * This strut fittings will be slotted (diamension of slot 20 mmx 7 mm)

36 Cable Tray Covers Ordering Guide - Cable Tray Covers Cable Tray acessories & Connectors Straight Divider Material Type CTVE CTVC CTPE CTPC inishing inishing HDG HDG AL SS4 AL SS6 SS6L CTVE-HD Length of Tray Steel Thickness Side Height Width SO/OS/SP/ SD emarks educing Connector SO/OS/SP/ C emarks Ventilated Edged Cover (CTVE) Ventilated Cover (CTVC) Drop Out SO/OS/SP/ DO emarks Plain Edged Cover (CTPE) Plain Cover (CTPC) Cover Type / 30 / 30 / 30 / 30 / 30 / 30 / 30 / 30 / 30 / 30 / 30 / 30 / 30 / 30 / 30 / 30 / 30 /// /// /// /// /// // // // / / / / emarks * Cable Tray Cover Length is TMI manufacturing standard, other Lengths can be provided upon request. Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness ish Plate SO/OS/SP/ P emarks 55 56

37 Cover Clamp Standard Connector Material Type SO/OS/SP/ CC emarks SO/OS/SP/ SC 180 / / / / emarks Cover Clamp With Screw langed Connector SO/OS/SP/ CCS emarks Material Type SO/OS/SP/ G 180 / / / / emarks Blind End Plate Angle Standard Connector Material Type SO/OS/SP/ BEP SO/OS/SP/ CSC 180 / / / / emarks emarks Dynamic Connector Bendable Divider SO/OS/SP/ DYC emarks SO/OS/SP/ BDD emarks Adjustable Connector Bonding Jumper SO/OS/SP/ ADC SO/OS/SP/ BJ emarks emarks 57 58

38 Cable Ladder Covers Ordering Guide - Cable Ladder Covers Cable Ladder accessories & Connectors Bendable Divider Material Type CVE CVC CPE CPC inishing inishing HDG HDG AL SS4 AL SS6 SS6L CLVE-HD Length of Tray Steel Thickness Side Height Width NC/OC//Z BDD emarks Drop Out NC/OC//Z DPO emarks Cover Clamp SO/OS/SP/ CC Ventilated Edged Cover (CLVE) Ventilated Cover (CLVC) emarks Plain Edged Cover (CLPE) Plain Cover (CLPC) Hold Down Clamp SO/OS/SP/ HDC Cover Type emarks /// /// /// /// /// // // // / / / / Light Duty is / mm Thickness Medium Duty is mm Thickness Heavy Duty is / mm Thickness * Cable Tray Cover Length is TMI manufacturing standard, other Lengths can be provided upon request. emarks Guide Clamp SO/OS/SP/ GC emarks 59 60

39 Double Cover Clamp Dynamic Connector NC/OC//Z DCC NC/OC//Z DYC emarks emarks Standard Connector Blind Endplate Material Type SO/OS/SP/ SC 180 / / / / NC/OC//Z BEP emarks emarks Expansion Connector Bonding Jumper Material Type SO/OS/SP/ SC 180 / / / / NC/OC//Z BJ emarks emarks Adjustable Connector NC/OC//Z ADC emarks 61 62

40 Cable Trunking accessories & Connectors Blind End Standard Coupler /HD/AL/SS4 /DTN/MTN BN emarks /HD/AL/SS4 /DTN/MTN SC emarks Box Connector /HD/AL/SS4 /DTN/MTN BC emarks Separator /HD/AL/SS4 /DTN/MTN SEP emarks ` Hanger /HD/AL/SS4 /DTN/MTN HAN emarks Offset Vertical /HD/AL/SS4 /DTN/MTN OSV Pin acks emarks /HD/AL/SS4 /DTN/MTN P emarks Offset Horizontal /HD/AL/SS4 /DTN/MTN OSH Wrap around Connector emarks /HD/AL/SS4 /DTN/MTN WC emarks 63 64

41 Cable Basket Covers Accessory Cover Type CO CO CO CO CO CO CO CO CO CO CO educer Coupler C P emarks emarks * Covers are snap-on type * All Covers are Solid Type Cable Basket accessories & Connectors Straight Coupler Self Slicing Coupler SSC emarks SC emarks Divider DD emarks 90 0 Coupler C90 emarks length Wise Hanger LH emarks SLOT 28x Coupler Width Wise Hanger 25 emarks C45 emarks WH SLOT 28x

42 41x41 Channel Type 1 Profiled Bracket 41x41C emarks Ø 9 PB-101 emarks 41x21 Channel Type 2 Profiled Bracket 41x21C PB-102 emarks Ø 9 emarks Hanger Bracket Type 3 Profiled Bracket HB emarks Ø 9 PB-103 emarks mm Type 1 Hanger Bracket Type 4 Profiled Bracket HB-101 emarks PB-104 emarks mm Type 2 Hanger Bracket SLOT 28x9 loor Mount & Support Bracket HB-102 emarks SLOT 28x9 MSB-102 emarks 67 68

43 Support System asteners Lighting Support Bracket Plain Washer Lock Washer Carrige Bolt LSB emarks Junction Box Support Bracket Accessory Accessory JBSB Type SS-WAP Size M6/M8/M10/M12 Type SS-WAL Size M6/M8/M10/M12 Type SS- Size M8/M10 emarks Keps Nut Nylock Nut Unifix Conduit and Support Bracket 1 Type Accessory Diameter mm CSB /25 emarks Conduit and Support Bracket 2 Ø 20/25 Type SS-KN Size M8/M10 Type Size Type Size SS-NN M8/M10 SS-U M6/M8/M10/M12 Type Accessory CSB-102 emarks Diameter mm 20/26 Ø 20 Ø 25 No Spring Nut Long Spring Nut Short Spring Nut Conduit and Support Bracket 3 Type Accessory Diameter mm CSB /25 emarks Ø 20 Ø 25 Type Size Type Size Type Size SS-NSN M6/M8/M10/M12 SS-LSN M6/M8/M10/M12 SS-SSN M6/M8/M10/M