About Us Casting Products Casting Workshop Machining Workshop Inspection Certif
|
|
- Briana Willis
- 6 years ago
- Views:
Transcription
1 1 de 17 28/11/ :11 About Us Casting Products Casting Workshop Machining Workshop Inspection Certif ASTM A 802 Standard Practice for Steel Castings, Iron Castings, Surface Accep The object of this standard is to facilitate cooperation between founder and casting purchaser in d quality level required. It should assist in avoiding misunderstanding arising from imprecise descriptions at the order st surface that is amendable to a particular techniques of non-destructive testing. The use of the com on photographs which can introduce uncertainties concerning interpretation, particularly w irregularities. The casting designer and purchasers can denote the level one to four on the drawings as the re founder, Dandong Foundry, will check the photos, and learn about the requirements. The compara quality inspection. Visual Inspection Acceptance Criteria Surface Feature Level I Level II Leve Surface Texture A1 A2 A Mon-metallic Inclusions B1 B2 B Gas Porosity C1 C2 C Fusion Discontinuities - D1 D Expansion Discontinuities - - E Inserts - - F Metal Removal Marks (Thermal Dressing) G1 G2 G Metal Removal Marks (Mechanical Dressing) H1 H3 H Metal Removal Marks (Welds) J1 J2 J A. Surface Texture - the natural surface of the casting after shot blasting. B. Non-Metallic Inclusions - Non-metallic material trapped on the surface of castings. C. Gas Porosity - Indications of gas t the casing surface. D. Fusion Discontinuities - surface irregularities giving a wrinkled appearance. E. Expansion Discontinuities - slightly raised surface irregularities.
2 2 de 17 28/11/ :11 F. Inserts - indications of chaplets (sand core supports) or internal chills. G. Metal Removal Marks (Thermal Dressing) - surface remaining after using oxy-ga metal removal. H. Metal Removal Marks (Mechanical Dressing) - surface remaining after using a mec surface or a previously thermally dressed surface. J. Metal Removal Marks (Welds) - indications of welds fully or partially removed by therm Comparators for the Definition of Surface Quality of Iron and St SURFACE TEXTURE - A1 SURFAC
3 3 de 17 28/11/ :11 SURFACE TEXTURE - A3 SURFAC
4 4 de 17 28/11/ :11 NON-METALLIC INCLUSIONS - B1 NON-METAL
5 5 de 17 28/11/ :11 NON-METALLIC INCLUSIONS - B3 NON-METAL
6 6 de 17 28/11/ :11 GAS POROSITY - C1 GAS
7 7 de 17 28/11/ :11 GAS POROSITY - C3 GAS
8 8 de 17 28/11/ :11 FUSION DISCONTINUITIES - D1 FUSION DIS
9 9 de 17 28/11/ :11 FUSION DISCONTINUITIES - D5
10 10 de 17 28/11/ :11 EXPANSION DISCONTINUITIES - E3 EXPANSION D
11 11 de 17 28/11/ :11 INSERTS - F1 IN
12 12 de 17 28/11/ :11 METAL REMOVAL MARKS - THERMAL DRESSING - G1 METAL REMOVAL MAR
13 13 de 17 28/11/ :11 METAL REMOVAL MARKS (THERMAL DRESSING) - G3 METAL REMOVAL MAR
14 14 de 17 28/11/ :11 METAL REMOVAL MARKS (MECHANICAL DRESSING) - H1 METAL REMOVAL MARK
15 15 de 17 28/11/ :11 METAL REMOVAL MARKS (MECHANICAL DRESSING) - H4 METAL REMOVAL MARK
16 16 de 17 28/11/ :11 METAL REMOVAL MARKS (WELDS) - J1 METAL REMOV
17 17 de 17 28/11/ :11 METAL REMOVAL MARKS (WELDS) - J3 METAL REMOV Home More Articles Gray Iron Castings Ductile Iron Castings Cast Steel Castings Green Sand Iron Castings Automatic Molding Castings Shell Molding Iron Castings Sand Mold Steel Castings Lost Wa Boiler Metal Parts Construction Machinery Parts Agricultural Machinery Parts Pump & Valv Manholes Other Iron & Steel Castings Prices Per Pound, Kg and Ton Cast iron Price Calcul DANDONG RUIDING FOUNDING CO., LTD. SITEMAP CONTACT US Tel: Fax: sales@iron-foundry.com galenchi ADDRESS: No.35 North Road, Qianyang Town, Dandong City, Liaoning, P.R. China
Casting Defects - Sand Mold, Metal Casting
1 de 9 28/11/2013 20:04 About Us Casting Products Casting Workshop Machining Workshop Inspection Certif Casting Defects - Sand Mold, Metal Casting Introducing various metal casting defects with many pictures
More informationAustralian Standard. Metal castings. Part 1: Ferrous sand moulded AS (Incorporating Amendment No. 1) AS
AS 4738.1 2004 (Incorporating Amendment No. 1) AS 4738.1 2004 Australian Standard Metal castings Part 1: Ferrous sand moulded This Australian Standard was prepared by Committee MT-001, Iron and Steel.
More informationCast steel: Group of ASTM standards for steel castings and forgings
Cast steel: Group of ASTM standards for steel castings and forgings Abstract: This group of ASTM specifications covers standard properties of steel and iron castings and forgings for valves, flanges, fittings,
More informationOutline CASTING PROCESS - 2. The Mold in Casting. Sand Casting Mold Terms. Assoc Prof Zainal Abidin Ahmad Universiti Teknologi Malaysia
Outline CASTING PROCESS - 2 Assoc Prof Zainal Abidin Ahmad Universiti Teknologi Malaysia Casting Molds Gating system pouring basin, sprue, runner, gate Riser Core Heating and melting Melting furnaces Pouring
More informationLUFKIN. RealTime Case Study. Lufkin Industries, Inc. Lufkin, Texas
Lufkin Industries, Inc. Lufkin, Texas RealTime Case Study Prepared by: MT Systems, Inc. 110 E. Williams Street Danville, IL 61834 Phone: (217) 446-4646 April 1993 Copyright @ 2000 MT Systems, Inc. January
More informationNaigai CERABEADS 60 for Any Kind of Metal
ITOCHU CERATECH CORPORATION August 21 Artificial Sand made in JAPAN Spherical Ceramic Sand for Foundry Naigai 6 for Any Kind of Metal > Anti-Burn-On > Thermal Expansion Control > Reduced Waste and Health
More informationMetal Casting. Manufacturing Processes for Engineering Materials, 5th ed. Kalpakjian Schmid 2008, Pearson Education ISBN No.
Metal Casting Important factors in casting Solidification of the metal from its molten state and accompanying shrinkage Flow of the molten metal into the mold cavity Heat transfer during solidification
More informationDedicated to Quality, Service & Partnerships
Dedicated to Quality, Service & Partnerships Company Introduction With a focus on investment casting, Acewell was established in 1998 and over the years has forged a reputation for dependable quality manufacturing.
More informationEASY BREATHE PORCERAX II INTRODUCING WITH PORCERAX II PLASTIC INJECTION MOLDING OTHERS... Pre-Hardened (35/38 HRC) Sintered, Porous Metal.
INTRODUCING PORCERAX II Pre-Hardened (35/38 HRC) Sintered, Porous Metal 7 or 20 Micron Pore Size BREATHE EASY WITH PORCERAX II PLASTIC INJECTION MOLDING OTHERS... Benefits Prevention of gas burning Eliminates
More informationAND IMPACT PROPERTIES RESEARCH PROJECT AT CASE WESTERN RESERVE UNIVERSITY
THE EFFECT OF INTERNAL SHRINKAGE DISCONTINUITIES ON THE FATIGUE AND IMPACT PROPERTIES OF CAST STEEL SECTIONS RESEARCH PROJECT AT CASE WESTERN RESERVE UNIVERSITY Sponsored by STEEL FOUNDRY RESEARCH FOUNDATION
More informationResource Guide. Section 4: Ni-Resist
Resource Guide Section 4: Ni-Resist Section 4 Ni-Resist Description of Grades... 4-3 201 (Type 1) Ni-Resist... 4-4 202 (Type 2) Ni-Resist... 4-6 Stock Listings... 4-8 4-2 Ni-Resist Description of Grades
More informationWelcome to Société des Fonderies de Treveray Facilities from Tréveray & Larians
Welcome to Société des Fonderies de Treveray Facilities from Tréveray & Larians Ed 14/07 Société des Fonderies de Tréveray Introduction Industries Production facilities Contact Société des Fonderies de
More informationWAUKESHA FOUNDRY. A United Stars Company INDUSTRY EXPERIENCE ENGINEERING EXPERTISE ADVANCED TECHNOLOGY
WAUKESHA FOUNDRY A United Stars Company INDUSTRY EXPERIENCE ENGINEERING EXPERTISE ADVANCED TECHNOLOGY EXPERIENCE AN INDUSTRY LEADER Waukesha Foundry has earned a reputation as an innovator in the production
More informationSueeraa Alloys Global Pvt Ltd
Sueeraa Alloys Global Pvt Ltd One stop sourcing point for all your needs High quality steel castings(sand) Investment castings Gravity Die Casting( GDC) Replicast Process Machining, Assembly & Testing
More informationD.1 High Integrity Magnesium Automotive Castings (HI-MAC)
D.1 High Integrity Magnesium Automotive Castings (HI-MAC) STATEMENT OF WORK Objective Vehicle weight reduction is a key enabler to meet future stringent CAFE requirements, and this can best be achieved
More informationDennis Dotson Dotson Iron Castings Mankato, Minnesota January, 2012
Dennis Dotson Dotson Iron Castings Mankato, Minnesota 507-381-1030 Denny@dotson.com January, 2012 The Saugus Iron Works was the first successful manufacturing plant in the New World and the Saugus Pot
More informationMEMBER REZAYAT GROUP OF COMPANIES
KHOBAR OFFICE : P.O. Box 328, Al Khobar 31952 Tel. No.+966-03-882-7068/7235/5700, Fax No.+966-03-882-5193 Saudi Arabian Fabricated Metals Industry Co. Ltd. JUBAIL OFFICE : P.O. 10018, Jubail Indt l City
More informationSTEEL FOUNDERS' SOCIETY OF AMERICA TECHNICAL SERVICE REPORT #124 ANALYSIS OF DEFECTS OF THE BORED SURFACE OF SIX 1025 CARBON STEEL CASTINGS
STEEL FOUNDERS' SOCIETY OF AMERICA TECHNICAL SERVICE REPORT #124 ANALYSIS OF DEFECTS OF THE BORED SURFACE OF SIX 1025 CARBON STEEL CASTINGS Published by the STEEL FOUNDERS' SOCIETY OF AMERICA Malcolm Blair
More informationCasting Process Part 2
Mech Zone Casting Process Part 2 (SSC JE Mechanical/ GATE/ONGC/SAIL BHEL/HPCL/IOCL) Sand Casting cope: top half drag: bottom half core: for internal cavities funnel sprue runners gate cavity {risers, vents}
More informationMain Markets Served. Recarburizer for Cast Iron. Freiberg. 16. October Cast iron foundries. Steel works. Friction industry.
Recarburizer for Cast Iron z Freiberg 16. October 2013 by Dr. Sören Köster Main Markets Served Cast iron foundries Recarburizer (Desulco, Xcarb, Super-G) Graphitic Inoculant (Super-Carb) Steel works Graphite
More informationResource Guide. Section 3: Ductile Iron
Resource Guide Section 3: Ductile Iron Section 3 Ductile Iron Description of Grades... 3-3 65-45-12 Ferritic... 3-4 80-55-06 Partially Pearlitic... 3-6 100-70-02 Pearlitic... 3-8 4512 HRDS Heat Resistant...
More informationAPPENDIX 1. PART 4: Radiographic Interpreter Level 2 CERTIFICATION SCHEME FOR PERSONNEL. 5 th Edition, February 2016
CERTIFICATION SCHEME FOR PERSONNEL Document No. CSWIP-ISO-NDT-11/93-R Requirements for the Certification of Personnel Engaged in Non- Destructive Testing in accordance with the requirements of BS EN ISO
More informationYDF VALVES Presentation Your Partner of Flow Control System
YDF VALVES Presentation Your Partner of Flow Control System www.ydfvalve.com Date: Jan, 2014 Milestone In 1978 Yancheng Power Station Valve Corporation. Produce high Pressure rating Gate, Globe and Check
More informationGas Holder Tank Maintenance, Design, Fabrication & Installation
Pipework Maintenance, Design, Fabrication & Installation Structural Steelwork Maintenance, Design, Fabrication & Installation Gas Holder Tank Maintenance, Design, Fabrication & Installation Under Pressure
More informationCast Steel Propellers W27. (May 2000) (Rev.1 May 2004)
(May 2000) (Rev.1 May 2004) Cast Steel Propellers 1. Scope 1.1 These unified requirements are applicable to the manufacture of cast steel propellers, blades and bosses. 1.2 Where the use of alternative
More informationSAMPLE. MEM05026C Apply welding principles. Learner Guide. MEM05 Metal and Engineering Training Package. Version 1. Product Code: 5672
MEM05 Metal and Engineering Training Package MEM05026C Apply welding principles Learner Guide Version 1 Training and Education Support Industry Skills Unit Meadowbank Product Code: 5672 Acknowledgments
More informationStandard Quality Plan
E_GuidelineTour_Perucchini_11_Layout 1 18/06/12 09:40 Pagina 1 precision castings fusioni di precisione präzisiongussteile fusions de precision fusiónes de precisión Standard Quality Plan General Index
More informationCryogenic Metal Seated Butterfly Valves
Cryogenic Metal Seated Butterfly Valves The Key to Cryogenic Valve Solutions VELAN S.A.S VELAN Inc Group VELAN inc is one of the world's leading independent manufacturer of steel gate, globe, check, butterfly
More informationComparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
More informationPART II: Metal Casting Processes and Equipment
Manufacturing Engineering Technology in SI Units, 6 th Edition PART II: Metal Casting Processes and Equipment Introduction Casting involves pouring molten metal into a mold cavity Process produce intricate
More informationOrganic Hazardous Air Pollutant Emission Factors For Iron Foundries. Prepared by: Air Quality Committee (10-E) American Foundry Society
Organic Hazardous Air Pollutant s For Iron Foundries Prepared by: Air Quality Committee (10-E) American Foundry Society Principal Author: James Schifo 17-Jun-07 Rev. Introduction The purpose of this document
More informationM A N U F A C T U R I N G R A N G E S S A L E S C O N T A C T S B U S I N E S S S E C T O R S
4016 en - 02.2006/a L E R O Y - S O M E R F O U N D R Y B U S I N E S S S E C T O R S ELECTRIC MOTORS, GEARBOXES, ALTERNATORS AIR AND REFRIGERATION COMPRESSORS TEXTILE MACHINERY AGRICULTURAL MACHINERY
More informationDetermining the Optimum Level of Inoculant Addition by Thermal Analysis A Case Study
Determining the Optimum Level of Inoculant Addition by Thermal Analysis A Case Study Vasko Popovski, PE Elkem Metals, Inc. Pittsburgh, PA Introduction The primary objective of inoculation is to produce
More informationSHENZHEN POWSTAR TECHNOLOGY LIMITED Capabilities Introduction
SHENZHEN POWSTAR TECHNOLOGY LIMITED Capabilities Introduction Outline 1. Company Profile 2. Organization Chart & Quality Management System Charts 3. Certificates 4. Company Quality Policy 5. Manufacturing
More informationB-02 THERMAL OIL HEATERS
Guideline No.: B-02(201510) B-02 THERMAL OIL HEATERS Issued date: October 20,2015 China Classification Society Foreword: This Guide is a part of CCS Rules, which contains technical requirements, inspection
More informationASME B31.3 Process Piping. 19. What s Different in B31.1
ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. What s Different in B31.1-1 19. What s Different in B31.1 Scope Organization of the Code
More informationCork Institute of Technology. Autumn 2005 Manufacturing Engineering (Time: 3 Hours)
Cork Institute of Technology Bachelor of Engineering (Honours) in Mechanical Engineering Stage 3 (Bachelor of Engineering in Mechanical Engineering Stage 3) Instructions Answer FIVE questions. Answer TWO
More informationTaesung Industrial COMPANY PROFILE HISTORY PROCESS PRODUCT LIST EQUIPMENT MEASURING MACHINE MAIN CUSTOMER CATALOG QUALITY ASSURANCE
Taesung Industrial LIST TAESUNG INDUSTRIAL SYSTEMS CO., LTD. http://taisung.koreasme.com COMPANY PROFILE HISTORY PROCESS PRODUCT LIST EQUIPMENT MEASURING MACHINE MAIN CUSTOMER CATALOG QUALITY ASSURANCE
More information12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping
MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including
More informationTURNKEY MECHANICAL PROJECTS
TURNKEY MECHANICAL PROJECTS Presentation Contents 1 Introduction 2 Products and Services 3 Dickinson Mechanical Projects 4 Scope of Projects 5 Business Alliances 6 Package Benefits and Partnership Introduction
More informationProduction & Turnover. 10/12/2017 Technology Industries of Finland
Production & Turnover 10/12/2017 Technology Industries of Finland 1 Industrial Production Volume Around the World 10/12/2017 Technology Industries of Finland Annualized seasonally adjusted volume index
More informationMold Design. 12. Mold Materials. Bong-Kee Lee School of Mechanical Engineering Chonnam National University
12. Mold Materials Bong-Kee Lee Chonnam National University Mold Materials easy toolmaking good performance during production good machining properties ease of hear treatment where hardening is required
More informationDevelopment of Veinseal
VEINSEAL The development of Veinseal as a revolutionary core additive followed a 6-7 year path, involving the testing of many different materials, in addition to requiring a bit of serendipity. Before
More informationIndustrial Products. Our Innovation. Your Advantage.
Industrial Products Our Innovation. Your Advantage. Bradken s Engineered Products Division is a full service iron and steel foundry and machining organization. We cover a wide range of materials and configurations
More informationDNVGL-CP-0248 Edition May 2016
CLASS PROGRAMME Approval of manufacturers DNVGL-CP-0248 Edition May 2016 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL"). The user accepts that
More informationLeader Valves Limited
+91-8071683931 Leader Valves Limited https://www.indiamart.com/leader-valves-limited/ An ISO 9001:2008 certified company offering a wide range of premium quality Valves such as Cast Steel Gate Valves,
More informationFabrication and Installation Table of Contents
Fabrication and Installation Table of Contents HDPE AQUASHIELD PRODUCTS 2 Fabrication and Installation 2 System Fabrication 3 Aqua-Swirl Installation 4 Step 1 Excavation and Bedding 4 Step 2 Pipe Connection
More informationBHARAT HEAVY ELECTRICALS LIMITED DEPT.235 TIRUCHIRAPALLI Non-Destructive Testing EFFECTIVE FROM
235-029 BHARAT HEAVY ELECTRICALS LIMITED DEPT.235 TIRUCHIRAPALLI 620 014 Non-Destructive Testing BHE:NDT:VV:RT- 06 Revision 07 Page 1 of 13 PROCEDURE FOR RADIOGRAPHIC EXAMINATION OF CASTINGS USED FOR VALVES
More informationONE STOP WHOLE-OF-MINE MATERIALS HANDLING SERVICE WEARX FOUNDRY CAPABILITIES
ONE STOP WHOLE-OF-MINE MATERIALS HANDLING SERVICE WEARX FOUNDRY CAPABILITIES FACILITY WEARX s foundry facility is based in Ballina in Northern New South Wales, Australia. The WEARX foundry provides a rapid
More informationIndo-US MIM Tec Pvt Ltd P r e c i s i o n I n v e s t m e n t C a s t i n g s P l a n t
Indo-US MIM Tec Pvt Ltd P r e c i s i o n I n v e s t m e n t C a s t i n g s P l a n t Location I n d o - M I M s t a t e - of- the- a r t I n v e s t m e n t c a s t i n g f a c i l i t y l o c a t e
More informationMETAL PRODUCTS PIPELINE ENGINEERING. Engineered Products for the Pipeline Pigging and Flow Assurance Industry
METAL PRODUCTS 1 2 3 PIPELINE ENGINEERING Engineered Products for the Pipeline Pigging and Flow Assurance Industry Engineered Products for the Pipeline Pigging and Flow Assurance Industry Pipeline Engineering
More informationFounding Radiographic examination
BRITISH STANDARD BS EN 12681:2003 Founding Radiographic examination The European Standard EN 12681:2003 has the status of a British Standard ICS 77.040.20 BS EN 12681:2003 National foreword This British
More information5 PRODUCTION COST ESTIMATION. PRODUCTION COST ESTIMATION : Instructional Objectives
Production Cost Estimation 129 5 PRODUCTION COST ESTIMATION PRODUCTION COST ESTIMATION : Instructional Objectives After studying this unit, the student should be able to : (i) Know how cost costimation
More informationLondon Products. Our Innovation. Your Advantage.
London Products Our Innovation. Your Advantage. London Products is a single source, single responsibility business of the Engineered Products Division. London Products remains true to its mission, To provide
More informationUNIT 45: Riser Design Wizard
UNIT 45: Riser Design Wizard The Riser Design Wizard allows you to analyze a casting model without risers or feeders, and determine the number, placement and size of risers or feeders that should be attached
More informationQuestion & Answers. NACE MRO-103 Material Compliance
NACE MRO-103 Material Compliance Question & Answers Q: I have a material certified to be compliant with NACE MR0175. Is that material also compliant with NACE MR0103? A: The short answer is: maybe, maybe
More informationCLEANER PRODUCTION IN FOUNDRY INDUSTRIES
CLEANER PRODUCTION IN FOUNDRY INDUSTRIES INTRODUCTION Foundry is one of the most energy intensive metallurgical industries. Various sections of Foundry namely Pattern making, molding, melting, core making,
More informationNon Destructive Evaluation of Rolls of Hot Strip Mill of Tata Steel
Non Destructive Evaluation of Rolls of Hot Strip Mill of Tata Steel J C Pandey, Manish Raj, & O N Mohanty NDE2002 predict. assure. improve. National Seminar of ISNT Chennai, 5. 7. 12. 2002 www.nde2002.org
More informationEMIRATES TECHNO CASTING
EMIRATES TECHNO CASTING TRENDS OF STEEL CASTING INDUSTRY IN VALVES AND PUMP PRODUCT APPLICATIONS RADHAKRISHNA KESANI GENERAL MANAGER EMIRATES TECHNO CASTING EMIRATES TECHNO CASTING RADHAKRISHNA KESANI
More informationSTUDY OF PISTON SLEEVE MANUFACTURED BY SAND CASTING PROCESS TO REDUCE REJECTION RATE USING SIMULATION SOFTWARE
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN 2249-6890 Vol. 3, Issue 2, Jun 2013, 161-168 TJPRC Pvt. Ltd. STUDY OF PISTON SLEEVE MANUFACTURED BY
More informationPower Generation. Your partner for innovative solutions. voestalpine Giesserei Linz GmbH
Power Generation Your partner for innovative solutions Tereza Schöberl, Key Account Managerin voestalpine Giesserei Linz GmbH www.voestalpine.com/foundry_linz A strong partnership for heavy responsibilities,
More informationSPECIALTY GRAPHITE MATERIALS FOR SINTERING. PDF PAGE PAGE 3VOLETS.indd 6 03/02/11 12:01
SPECIALTY GRAPHITE MATERIALS FOR SINTERING PDF PAGE PAGE 3VOLETS.indd 6 03/02/11 12:01 Pressure Sintering Mersen graphite is being used extensively through out the pressure sintering industry to produce
More informationThe Influence of Grain Size of Dissimilar Welding between Carbon Steel and Stainless Steel on Ultrasonic Testing
International Conference on Test, Measurement and Computational Method (TMCM 2015) The Influence of Grain Size of Dissimilar Welding between Carbon Steel and Stainless Steel on Ultrasonic Testing Kwanruethai
More informationManufacturing and Quality Control Thermo Scientific Niton XRF Analyzers
Manufacturing and Quality Control Thermo Scientific Niton XRF Analyzers Eliminating the guesswork verifying metal alloys for manufacturing quality assurance Positive material identification in seconds,
More informationTotal Quality Management. Quick and Accurate Response to Inquiries. As-Promised Deliveries. Fair and Competitive Prices
FORGED SHAPES 1 2 MISSION STATEMENT The Anderson Shumaker team is dedicated to earning your loyalty and gaining your trust through: Total Quality Management Quick and Accurate Response to Inquiries As-Promised
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17945 First edition 2015-04-15 Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
More informationEXPERIMENTAL STUDY OF ELECTRODE SELECTION EFFECTS ON MECHANICAL PROPERTIES OF UNDERWATER WET WELDED-JOINTS
EXPERIMENTAL STUDY OF ELECTRODE SELECTION EFFECTS ON MECHANICAL PROPERTIES OF UNDERWATER WET WELDED-JOINTS Nur Syahroni 1, Imam Rochani 1 and Harfian Nizar 2 1 Faculty Staff in Department of Ocean Engineering,
More informationFERROXYL TEST FOR IRON CONTAMINATION
FERROXYL TEST FOR IRON CONTAMINATION 1. SCOPE This specification describes a highly sensitive test for detecting free iron on surfaces of equipment, and the preparation of the equipment for the test. 2.
More informationREFERENCE SYLLABUS. for WELDING EXAMINER & WELDING EXAMINER IN TRAINING CERTIFICATES OF COMPETENCY EXAMINATIONS
WELDING EXAMINER & CERTIFICATES OF COMPETENCY S AB-94 Edition 1, Revision 6, 2016-05-01 This syllabus is being phased out and will be discontinued on April 30, 2018. GENERAL INFORMATION INTRODUCTION: This
More informationISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries
INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries
More informationREQUIREMENTS. Metal Components for use in the Advanced LIGO Vacuum System
Sheet 1 of 5 APPROVALS DATE Document Change Notice AUTHOR(S): Calum Torrie, Dennis Coyne, Ken Mailand 27-Oct-2010 see DCC record Status: 1 Introduction All metal components intended for vacuum service
More informationCOPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6
More informationStress Testing is a New NDT Type in the Russian Standard GOST R and International Standard ISO-9712.
17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China Stress Testing is a New NDT Type in the Russian Standard GOST R 52330-2005 and International Standard ISO-9712. Anatoly
More informationOne Solution For "Monday Morning" Iron
One Solution For "Monday Morning" Iron Chad S. Moder Superintendent-Melt and Metal Processing Plant 2 Neenah Foundry Company Monday Morning iron is a phenomenon that every iron casting facility faces.
More informationEnergy Systems Service Pte. Ltd. Company Registration No W
Project & Quality Surveillance Production and Project Consulting Production and Field Service Coating, Welding Supervision and Inspection / NDT (UT, LPT, MT, VT) Supplier Quality Assessment, Coating Inspection,
More informationThe filtration of large grey and ductile iron castings
The filtration of large grey and ductile iron castings E. Wiese Foseco PLC, UK. Abstract Filtration of mass produced automobile castings is widely and successful applied, less common and more difficult
More informationEnergy auditing guidelines for iron and steel enterprises and building materials enterprises in China GUIDELINES SUMMARY
Energy auditing guidelines for iron and steel enterprises and building materials enterprises in China GUIDELINES SUMMARY November 2013 1 ABOUT THIS DOCUMENT This document provides a summary of two sets
More informationSimulation of Core Gas Production During Mold Fill
Simulation of Core Gas Production During Mold Fill P. Scarber, Jr. The University of Alabama at Birmingham C.E. Bates The University of Alabama at Birmingham Copyright 2006 American Foundry Society ABSTRACT
More informationAssessment of Quality and Acceptance Criteria of continuous cast Steel blooms by Comparing ultrasonic signals and Macro Structure
NDE2002 predict. assure. improve. National Seminar of ISNT Chennai, 5. 7. 12. 2002 www.nde2002.org Assessment of Quality and Acceptance Criteria of continuous cast Steel blooms by Comparing ultrasonic
More informationRecently, manufacturing of high-quality die casting
CHINA FOUNDRY Vol.5 No.4 Improvement of die life in high speed injection die casting Yasuhiro Arisuda 1, *Akihito Hasuno 1, Junji Yoshida 2, Kazunari Tanii 2 (1. RYOBI Limited, 762 Mesaki-ch, Fuchu-shi,
More informationvoestalpine Additive Manufacturing Center Singapore Pte Ltd
voestalpine Additive Manufacturing Center Singapore Direct Metal Deposition, DMD. 30 th November 2017 www.voestalpine.com voestalpine Additive Manufacturing Center. Singapore Direct Metal Deposition» Company
More informationD-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves
TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed
More informationGENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS
- June 2013 Addendum GENERAL CONTENTS SECTION I - NUCLEAR ISLAND COMPONENTS SUBSECTION "A" : GENERAL RULES SUBSECTION "B" : CLASS 1 COMPONENTS SUBSECTION "C" : CLASS 2 COMPONENTS SUBSECTION "D" : CLASS
More informationENGINEERING STANDARD PENETRANT ACCEPTANCE CRITERIA ES Prepared by: H. HOPKINSON Date: Reviewed by: J. MOELLER Date:
ENGINEERING STANDARD ES 2012 Prepared by: H. HOPKINSON Date: 12-21-90 Reviewed by: J. MOELLER Date: 12-27-90 Approved by: J. D. MOELLER Date: 12-27-90 John D. Moeller Director of Engineering 1 REVISIONS
More informationANSWER ONLY FIVE QUESTIONS
Ministry of Higher Education & Scientific Research, Baghdad-Iraq University Of Technology Department of Materials Engineering وزارة التعليم العالي والبحث العلمي بغاد - العراق الجامعت التكنولوجيت قسم هندست
More informationTGL Fabrication Co.,Ltd. A growing Company with a growing reputation. Horizontal Load Testing & Inspection Services.
Horizontal Load Testing & Inspection Services. TGL Fabrications Co; Ltd Inspection Services provides comprehensive inspection of all hoisting and lifting gear onshore & offshore; the equipment is inspected
More informationIMF Ingot Metallurgy Forum
IMF Ingot Metallurgy Forum 19 th Annual Ingot Metallurgy Symposium September 27, 2006 THE RAMM MOLDS by Horacio Lima 1 TABLE CONTENTS: PAGE 3. HTCI- GRAY IRON MOLD BY RAMM 4. TAILORED DUCTILE IRON MOLDS
More information:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD
:: SALES :: SERVICE :: CONTRACT EXECUTION :: REVAMP & REBUILD Pradman Profile Established in 1969 Total Manpower 102+ Focus Industries Steel, Structural Steel Infrastructure - Transmission Tower Manufacturing,
More informationRAILTECH SYSTEM & SERVICES (RSS) - Flash Butt Welding Solutions
RAILTECH SYSTEM & SERVICES (RSS) - Flash Butt Welding Solutions GENERAL PRESENTATION Within RAILTECH Group, the Railtech System & Services (RSS) division is specialized in the design and the supply of
More informationHOT-ROLLED COIL. Contents. 1. Company Profile 2
HOT-ROLLED COIL Contents 1. Company Profile 2 2. Integrated Steel Mill Instruction 4 3. Typical Specification 5 3.1 Chemical Compositions & Mechanical Properties 5 3.2 Tolerances 11 4. Available Manufacturing
More informationCasting Simulations with STAR-Cast. Julian Gänz, CD-adapco
Casting Simulations with STAR-Cast Julian Gänz, CD-adapco Need for Casting Simulation Processes Permanent Mold Market Overview [Mio tons] Tilt Casting Low Pressure-Casting High Pressure Die 9 19,4 13,6
More informationHINDON FORGE PVT. LTD.
www.hindonforge.net Hammering Quality into Forgings An ISO 9001:2000 Certified Co. HINDON FORGE PVT. LTD. Manufacturers of Critical Steel Forgings and Flanges MANUFACTURERS & EXPORTERS OF ALL KINDS OF
More informationSulzer Pumps. Cast Materials. The Heart of Your Process
Sulzer Pumps Cast Materials The Heart of Your Process Sulzer Pumps Striving to Serve You Better Sulzer Pumps is a leading global supplier of reliable products and innovative pumping solutions for end users.
More informationAn Overview of Lost Foam Casting Technology Development in China
Paper 08-035(14).pdf, Page 1 of 8 An Overview of Lost Foam Casting Technology Development in China Copyright 2008 American Foundry Society D. Sun Ashland Performance Materials, Dublin, Ohio ABSTRACT China
More informationBrinell Rockwell Vickers. Hardness Tester (Manual)
Brinell Rockwell Vickers Hardness Tester (Manual) Brinell Rockwell Vickers Hardness Tester (Electric) Brinell Hardness Tester (Electronic) Brinell Rockwell Vickers Hardness Tester MANUAL BRV-9000M Test
More informationPART 2: Magnetic Particle Inspector, Level 1, 2 and 3
CERTIFICATION SCHEME FOR PERSONNEL DOCUMENT No. CSWIP-ISO-NDT-11/93-R Requirements for the Certification of Personnel Engaged in Non- Destructive Testing in accordance with the requirements of BS EN ISO
More informationQualification scheme for welders of hull structural steels
(Sept 2016) Qualification scheme for welders of hull structural steels 1. Scope 1.1 This document gives requirements for a qualification scheme for welders intended to be engaged in the fusion welding
More informationISO INTERNATIONAL STANDARD. Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements
INTERNATIONAL STANDARD ISO 3834-3 Second edition 2005-12-15 Quality requirements for fusion welding of metallic materials Part 3: Standard quality requirements Exigences de qualité en soudage par fusion
More informationDesign of Mercury Storage Containers
Design of Mercury Storage Containers Adam J. Carroll Remote Systems Group / Nuclear Science and Technology Division Oak Ridge National Laboratory October 13, 2009 Email: carrollaj@ornl.gov Phone: 1-865-576-7505
More informationAnchor chain cables and accessories
CLASS PROGRAMME Approval of manufacturers DNVGL-CP-0254 Edition May 2016 The content of this service document is the subject of intellectual property rights reserved by ("DNV GL"). The user accepts that
More information