Portable Hardness Tester NOVOTEST T-D1

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Portable Hardness Tester NOVOTEST T-D1"

Transcription

1 NOVOTEST of Ukraine, founded in 2009, is a leading manufacturer in Ukraine of high quality portable instruments for non-destructive testing of materials such as concrete, metal or polymeric materials. Scientific and Technical Centre "Industrial Devices and Technologies" Ltd 5, Spasskaya street Novomoskovsk, Ukraine Phone: , , Fax: , Skype: novotest.ua

2 Portable digital hardness tester NOVOTEST T-D1 is designed for rapid non-destructive testing of hardness : metals and alloys on hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron, etc.) with five additional scales for calibration; use of the scale of tensile strength (Rm) for determining the tensile strength of carbon steel products pearlitic by automatically converting from the scale of hardness Brinell (HB); Implements the rebound method. Portable Hardness Tester NOVOTEST T-D1 The advantages of dynamic hardness NOVOTEST T-D1 measuring the hardness of materials with heterogeneous, coarse-grained structure, forged products, castings, cast iron performance wide range of hardness convenience and ease of measurement minimum number of controls graphical display with backlight, battery status monitoring Limitations of dynamic hardness NOVOTEST T-D1 Measurement items weighing less than 3 kg or less thickness of 12mm is possible only when the following conditions: product must be kept tightly stoppered to the surface of the base plate weighing not less than 3 kg.

3 Portable UCI Hardness Tester NOVOTEST T-U1 UCI Hardness tester NOVOTEST T-U1 is designed for rapid non-destructive testing of hardness according to ASTM A956 and DIN 50156: metals and alloys on standardized CIS hardness scales: Rockwell (HRC), Brinell (HB), Vickers (HV); metals with different properties from steel (for example, non-ferrous metals, alloys, cast iron, etc.) with five additional scales for calibration; use of the scale of tensile strength (Rm) in accordance with GOST for determining the tensile strength of carbon steel products pearlitic by automatically converting from the scale of hardness Brinell (HB); Implements the method of ultrasonic contact impedance (UCI). The advantages of ultrasonic contact impedance hardness tester NOVOTEST T-U1 hardness measurement of any mass products with a thickness of 1mm - inaccessible to the dynamic hardness (small parts, thin-walled structures, pipes, tanks, steel sheets, articles of complex shape control of metallic coatings, etc.) small print on the product surface (mirror surfaces is possible to control necks crankshafts, knives, etc. wide range of hardness convenience and ease of measurement minimum number of controls graphical display with backlight, battery status monitoring Limitations of UCI hardness tester NOVOTEST T-U1 Limited use for the measurement of products with a coarse-grained structure (eg, iron) or weighing less than 10 grams, or less than 1 mm thick

4 Portable Two-In-One Combined Hardness Tester NOVOTEST T-UD2 Combined hardness tester NOVOTEST T-UD2 implements methods for rebound and ultrasonic contact impedance (UCI). The combination of both methods allows control of all metal products. The advantages of universal hardness tester NOVOTEST T-UD2: 2 removable probes: ultrasonic and dynamic there are no restrictions under the control of hardness (by weight, configuration, structure, degree of mechanical and thermal treatment, etc.) to evaluate changes in the hardness of the hardened layer depth articles and the effect of surface stress wide range of hardness convenience and ease of measurement minimum number of controls graphical display with backlight automatic recognition of sensor indication of the type connected sensor control of the battery extended temperature range (frost, down to -20 degrees Celsius LED) presence of internal memory and a communication channel with PC new, intuitive menu with tips on the buttons

5 Coating Thickness Gauge NOVOTEST TP-1 Nondestructive testing of all types of the coatings! Rugged, fully electronic coating thickness gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals, accurately and quickly. Coating thickness gauge NOVOTEST TP-1 designed for nondestructive testing thickness of: paint and other dielectric (mastic, plastic, Teflon etc.) and plating on steel (ferrous metals); paint and other dielectric (mastic, plastic, Teflon etc.) and plating on nonferrous metals and non-ferrous alloys; thickness of the bitumen and other thick coatings on various metals and alloys; as well as relative humidity, air temperature, surface temperature, dew point temperature and difference between surface and dew point temperatures, estimate the depth of grooves and the surface roughness

6 Ultrasonic method for measuring the thickness Ultrasonic Thickness Gauge NOVOTEST UT-1 Thickness gauge NOVOTEST UT-1 operates on the principle of measuring the propagation time of ultrasound in the product. The pulse generator produces a high frequency electrical pulses that excite the piezoelectric transducer (Probe). At the same transducer converts electrical signals into the elastic (mechanical) vibrations - sound waves. These waves propagate from the surface to reflect the input (bottom) of the surface and re-taken and converted into an electrical signal by means of PET. The instrument calculates the thickness. Ultrasonic Thickness Gauge NOVOTEST UT-1 is designed for rapid non-destructive testing of thickness: products made of various metals, alloys and other materials; thickness of glass, plastic, composite and other products from non-metallic materials; the walls of the tanks, pipes, casing parts, sheets, overhead, transportation, and other structures, including the corroded surfaces, pitted, with scum, etc. thickness of the products during their production and operation; metal thickness for diagnostic and expert work with one-side access to the object of control

7 Rebar Detector and Concrete Cover Meter NOVOTEST Armaturoskop The main function of rebar detector and concrete cover meter NOVOTEST Armaturoskop Measuring the thickness of the protective layer of concrete with a certain diameter Determination of the diameter of fittings for a known protective layer Measurements of the unknown parameters of reinforcement Scan mode products Deep search for reinforcement Configuration mode for steel Rebar detector and concrete cover meter NOVOTEST Armaturoskop intended for operational monitoring of reinforced concrete products and structures for process control in the factories and building sites, surveys buildings and structures. The device measures the protective layer of concrete magnetic method in accordance with GOST Measuring the thickness of concrete cover NOVOTEST Armaturoskop allows for : Operational control of the quality of reinforced concrete products and structures magnetic method in accordance with GOST for process control in factories and construction sites, the examination of structures, buildings and structures Determination of surface areas of structures, free from the overlying valve to measure the strength of the methods: ultrasound, shock pulse, separation from the edge chipping and cleavage Measure the diameter and depth of reinforcement (depending on modification)

8 Ultrasonic Tester of building materials strength + Depth of cracks + Flow Detect NOVOTEST IPSM U+T+D The device allows you to control the strength and homogeneity of the concrete (GOST , Recommendations NIIZhB MDS ), brick (GOST 17624) and other materials under the composition and surface sounding in products and designs for construction projects, the process control, inspection of buildings, structures. Allows you to control the strength of concrete of unknown composition on the characteristics of TSNIIOMTP. Has the function of determining the depth of cracks in the surface sounding. Measuring the strength and uniformity of construction materials by ultrasonic method NOVOTEST IPSM-U + T + D is for : Detection of voids, cracks and defects encountered in the production and operation of structures (for process control and inspection of facilities) Control and uniformity of concrete strength (GOST 17624, Guidelines MDS ), brick (GOST 24332), construction and composite materials, structures, bridges and waterworks Measure the depth of cracks in the products and designs Determine the density and elastic modulus uglegrafitov and fiberglass Definitions of sound index construction ceramics and abrasives Estimates of the porosity, fracturing and anisotropy of the material Assess the degree of maturity of the concrete in a monolithic concreting visualize the presence of a signal (A-scan) the possibility of control of concrete (and other) constructions for internal defects, discontinuities. Improve the accuracy of measurement of time intervals by allowing manual selection of the moment trip meter

9 Ultrasonic Flow Detector NOVOTEST UD-1 Flaw Detector NOVOTEST UD-1 is designed to detect defects, such as continuity and uniformity of materials in products and welded joints, to measure the depth and position of their occurrence, thickness measurements, measurements of velocity and attenuation of ultrasonic waves (ultrasonic) in the material. Ultrasonic Flaw detector NOVOTEST UD-1 with a color display and a minimum size - this is the best choice for expert ultrasonic testing. Powerful, lightweight and portable, the ergonomic impact-resistant metal casing. The flaw detector UD-1 allows to measure the thickness of the product with great accuracy, the signal to be in the form of A-and B-scans and has all the features of the full documentation of control. Ultrasonic Flaw detector NOVOTEST UD-1 allows you to replace outdated flaw detectors, providing a modern level of comfort with flaw, the function of testing results, save the settings and control of converters, and the device is priced at analog flaw detector. Ultrasonic Flaw detector NOVOTEST UD-1 meets all requirements of the modern digital flaw detector, while having a value lower than all the existing analogues! The advantages of ultrasonic flaw NOVOTEST UD-1 Frequency range with continuously adjustable from 0.2 to 10MHz. Two independently controlled gate (A and B). Automatic or manual construction of the TCG curve (32 points). Two types of representations of signals: the detection and radio. Build and handling A, B scans. Modes: the envelope, freeze and display of the beam.

10 Gaussmeters (Magnetometers) NOVOTEST MF-1 Gaussmeter (magnetometer) NOVOTEST MF-1 is designed for rapid non-destructive testing: magnetic fields in the control of ferromagnetic products by MT control; levels of industrial noise; technical characteristics of equipment for magnetic particle inspection of passport data and the requirements of normative and technical documentation; the level of the remanent magnetization of products after magnetic particle inspection; Portable magnetometer (gaussmeter) NOVOTEST MF-1 is equipped with a Hall sensor to measure the magnetic induction in the following units: Gauss, Tesla, Amps / meter. The instrument used to measure the static field. Magnetometer (gaussmeter) consists of an electronic unit and various removable sensors. The device runs on two standard alkaline batteries AAA (1.5 V).

11 NOVOTEST's worldwide dealer network supplies and supports our products throughout the world. Please contact us for the authorized dealer in your country. If you are interested in distributing our NDT Inspection Instruments, please contact us. Russia: St. Petersburg city Novotest-Russia Phone: Fax: Canada: Port Moody BC LineLight Trading Canada Inc Phone: Fax: China: Beijing Beijing LAB Hightech Instrument Ltd 121Room, Building 15, Xueyuan Road 20 Haidian District, Beijing, China (100083) Ben Zhang Phone: Fax:

Combined Hardness Tester NOVOTEST T-UD2

Combined Hardness Tester NOVOTEST T-UD2 Combined Hardness Tester NOVOTEST T-UD2... High-precision, easy in operation and reliable with the most affordable price in the world among the analogues! Two probes: UCI and Leeb Any restrictions for

More information

Combined Hardness Tester NOVOTEST T-UD3 NEW

Combined Hardness Tester NOVOTEST T-UD3 NEW Combined Hardness Tester NOVOTEST T-UD3 NEW Unique, multi-functional, convenient, and reliable tester at affordable price! 88 combinations of materials and hardness scales and calibrations Integrated camera

More information

UCI Hardness Tester NOVOTEST T-U3

UCI Hardness Tester NOVOTEST T-U3 UCI Hardness Tester NOVOTEST T-U3 Unique and unmatched Portable Hardness Tester! High-precision, multi-functional, convenient, reliable and affordable. 88 combinations of materials and hardness scales

More information

UCI Hardness Tester NOVOTEST T-U3 NEW

UCI Hardness Tester NOVOTEST T-U3 NEW UCI Hardness Tester NOVOTEST T-U3 NEW.. Unique and unmatched Portable Hardness Tester! High-precision, multi-functional, convenient, reliable and at affordable price! 88 combinations of materials and hardness

More information

PORTABLE ULTRASONIC HARDNESS TESTER

PORTABLE ULTRASONIC HARDNESS TESTER PORTABLE ULTRASONIC HARDNESS TESTER MET-U1A MET-U1A ULTRASONIC HARDNESS TESTER, 15N TESTFORCE FEATURES The INNOVATEST MET-U1A differs completely from traditional hardness testers. Instead of measuring

More information

Coating Thickness Gauge TG-100 series Applications: F Type Magnetic induction: Can measure the thickness of non-magnetic coating layers on magnetic substrate Such as: (aluminum, chrome, copper, enamel,

More information

PORTABLE HARDNESS TESTING

PORTABLE HARDNESS TESTING Portable Hardness Tester IPX-300 Handheld dynamic metal hardness tester with hardness conversion and automatic position setting. Dynamic hardness testing: quick and reliable Impact device D integrated:

More information

PORTABLE COATING THICKNESS GAUGE

PORTABLE COATING THICKNESS GAUGE Coating Thickness Gauge IPX-201F Handheld coating thickness gauge with F-probe for steel substrates. Clear 4 digit segment LCD display Magnetic induction measuring principle Non-magnetic coating on ferrous

More information

EPX300 Portable Hardness Tester

EPX300 Portable Hardness Tester EPX300 Portable Hardness Tester CONTENTS 1 Introduction 1.1 Principle 1.2 Structure 1.3 Specifications 2 Test 2.1 Preparation 2.2 Test Procedure 2.3 Browse 2.4 Printing 3 Setup 3.1 Material 3.2 Direction

More information

ME -215 ENGINEERING MATERIALS AND PROCESES

ME -215 ENGINEERING MATERIALS AND PROCESES ME -215 ENGINEERING MATERIALS AND PROCESES Instructor: Office: MEC325, Tel.: 973-642-7455 E-mail: samardzi@njit.edu PROPERTIES OF MATERIALS Chapter 3 Materials Properties STRUCTURE PERFORMANCE PROCESSING

More information

Hardness Testers Surface Testers

Hardness Testers Surface Testers Hardness Testers Surface Testers 49 3814 Analogue Bench Hardness Tester The 3814 Hardness Tester provides reliable Rockwell Hardness values on all types of metal and alloys, hard or soft, and in many shapes.

More information

MODERN ULTRASONIC TECHNIQUES FOR DEFECT DETECTION IN CAST MATERIALS

MODERN ULTRASONIC TECHNIQUES FOR DEFECT DETECTION IN CAST MATERIALS MODERN ULTRASONIC TECHNIQUES FOR DEFECT DETECTION IN CAST MATERIALS INTRODUCTION S. Palit Sagar National Metallurgical Laboratory, Jamshedpur 831007 e-mail : sarmi@nmlindia.org In casting flaw detection

More information

Ultrasonic Inspection of Sub-Surface Defects In Aluminium Die-Castings 71

Ultrasonic Inspection of Sub-Surface Defects In Aluminium Die-Castings 71 Ultrasonic Inspection of Sub-Surface Defects In Aluminium Die- Castings by Suresh Palanisamy (CAST) A/Prof. Romesh Nagarajah Dr. Pio Iovenitti Abstract Non-destructive testing using ultrasonic measurement

More information

ROCKY TH-110. Portable Hardness Tester

ROCKY TH-110. Portable Hardness Tester ROCKY TH-110 Portable Hardness Tester PORTABLE HARDNESS TESTER ROCKY TH-110 ROCKY TH-110 PORTABLE HARDNESS TESTER WITH BUILT-IN PRINTER 2 PORTABLE HARDNESS TESTING FEATURES The year 1989, the first TIME

More information

The Influence of Grain Size of Dissimilar Welding between Carbon Steel and Stainless Steel on Ultrasonic Testing

The Influence of Grain Size of Dissimilar Welding between Carbon Steel and Stainless Steel on Ultrasonic Testing International Conference on Test, Measurement and Computational Method (TMCM 2015) The Influence of Grain Size of Dissimilar Welding between Carbon Steel and Stainless Steel on Ultrasonic Testing Kwanruethai

More information

COATING THICKNESS MEASURING

COATING THICKNESS MEASURING LIST- MAGNETIK COATING THICKNESS MEASURING www.list-magnetik.de COATING THICKNESS MEASURING on metallic substrate magnetic induction measuring method Paint Zinc coating eddy current measuring method d2

More information

Practical challenges during high temperature ultrasonic scanning

Practical challenges during high temperature ultrasonic scanning Practical challenges during high temperature ultrasonic scanning Mr. P. Sukumaran Reliability & Maintenance Department, Equate Petrochemical Company Ahmadi, Kuwait Email: sukumap@equate.com Background:

More information

Developments in Ultrasonic Inspection II

Developments in Ultrasonic Inspection II Developments in Ultrasonic Inspection II Application of Real-Time Signal Processing to Ultrasonic Testing H. Hatanaka, T. Nakajima, T. Arakawa, IHI Inspection and Instrumentation Co., Ltd., Japan; Y. Kurokawa,

More information

Coating Thickness Meter Data Sheet / Instructions

Coating Thickness Meter Data Sheet / Instructions Paint Test Equipment Coating Thickness Meter Data Sheet / Instructions Coating Thickness Meter Information The Paint Test Equipment Coating Thickness Meter easily measures all coatings on metallic substrates

More information

Below the Surface: The Importance of Mechanical Integrity at Your Plant. ERI Solutions Inc. All Rights Reserved.

Below the Surface: The Importance of Mechanical Integrity at Your Plant. ERI Solutions Inc. All Rights Reserved. Below the Surface: The Importance of Mechanical Integrity at Your Plant Introduction ERI Solutions Inc. (ERI) founded in 2003 to develop insurance markets and standards for the growing ethanol industry.

More information

PORTABLE INSTRUMENTS 2014

PORTABLE INSTRUMENTS 2014 PORTABLE INSTRUMENTS 2014 . INNOVATEST Europe BV Edition: Portable instruments 05-2014 Changes in products and/or product specifications can emerge due to new technologies and continuous development. We

More information

Understanding Coating Thickness Measurement Helmut Fischer

Understanding Coating Thickness Measurement Helmut Fischer Understanding Coating Thickness Measurement Helmut Fischer Many of the materials used in today s products have some sort of coating, whether it s the shiny new paint job on your Lexus, the anodized protection

More information

www.niagara-testing.com XYZ Mining Company XYZ Mine SAG Mill Gear Nondestructive Testing Report and Summary Provided by: Niagara Testing West Corporation Tucson, Arizona 85737 Steven Jacobs, Cell (520)

More information

Electromagnetic thickness measurement of coatings. Situation and prospects.

Electromagnetic thickness measurement of coatings. Situation and prospects. 11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6-10, 2014, Prague, Czech Republic More Info at Open Access Database www.ndt.net/?id=16306 Electromagnetic thickness measurement

More information

TESA Rugosurf 10. Portable, robust and versatile roughness gauge specially designed for surface testing in the workshop.

TESA Rugosurf 10. Portable, robust and versatile roughness gauge specially designed for surface testing in the workshop. Metrology-based Inspection TESA Rugosurf 10 Portable, robust and versatile roughness gauge specially designed for surface testing in the workshop. Optional software and printer for both Rugosurf 10 and

More information

Non-destructive Testing of Concrete - Methods of Test. Lecture No. 26

Non-destructive Testing of Concrete - Methods of Test. Lecture No. 26 Non-destructive Testing of Concrete - Methods of Test Lecture No. 26 Rebound Hammer (IS 13311( Part 2 ) : 1992) The rebound hammer method could be used for: i) Assessing the likely compressive strength

More information

Fast Corrosion Screening Technique Saturation Low Frequency Eddy Current

Fast Corrosion Screening Technique Saturation Low Frequency Eddy Current Summary The inspection of ferromagnetic and non-ferromagnetic material components is an attractive and efficient method due to its fast screening of large areas with low surface preparations. Already qualified

More information

Brinell Rockwell Vickers. Hardness Tester (Manual)

Brinell Rockwell Vickers. Hardness Tester (Manual) Brinell Rockwell Vickers Hardness Tester (Manual) Brinell Rockwell Vickers Hardness Tester (Electric) Brinell Hardness Tester (Electronic) Brinell Rockwell Vickers Hardness Tester MANUAL BRV-9000M Test

More information

ADHESIVE CURE MONITORING WITH ACOUSTIC METHOD

ADHESIVE CURE MONITORING WITH ACOUSTIC METHOD ADHESIVE CURE MONITORING WITH ACOUSTIC METHOD I. Severina, E. Maeva Industrial Research Chair In Applied Solid State Physics and Material Characterization, University of Windsor, Windsor, Canada Abstract:

More information

Effective PA UT Inspection Techniques for Austenitic Welds

Effective PA UT Inspection Techniques for Austenitic Welds Effective PA UT Inspection Techniques for Austenitic Welds Guy MAES, Johan BERLANGER, Frédéric LAPRISE (Zetec, Quebec, Canada) NDTMA 2017 Las Vegas, February 15, 2017 Zetec Inc. All right reserved 1 Introduction

More information

SMB'S EQUIPMENT IN DETAIL

SMB'S EQUIPMENT IN DETAIL TENSILE TESTING MACHINE Test force tension/pressure 150 KN Test speed 0.001 to 1'000 mm/min Fine strain displacement transducer 25 to 50 mm Software controlled testing IMPACT TESTING MACHINE Software controlled

More information

UT WITH SH-WAVES AND ELECTROMAGNETIC ULTRASONIC (EMUS) -TRANSDUCERS

UT WITH SH-WAVES AND ELECTROMAGNETIC ULTRASONIC (EMUS) -TRANSDUCERS UT WITH SH-WAVES AND ELECTROMAGNETIC ULTRASONIC (EMUS) -TRANSDUCERS Gerhard Hubschen Fraunhofer-Institut fur zerstorungsfreie Prufverfahren Universitat, Gebaude 37 D-6600 Saarbrucken 11, W. Germany INTRODUCTION

More information

FLUXUS F601. Portable, quick and reliable. Clamp-on ultrasonic flow meter. Measure from outside what's flowing inside

FLUXUS F601. Portable, quick and reliable. Clamp-on ultrasonic flow meter. Measure from outside what's flowing inside Reliable flow measurement in less than 5 minutes. Wide application range. With long life marathon battery. Portable, quick and reliable FLUXUS F601 Clamp-on ultrasonic flow meter Accurate Flexible Quick

More information

Pulsed Eddy-Current (PEC) Inspection through Insulation

Pulsed Eddy-Current (PEC) Inspection through Insulation INDUSTRIAL SERVICES WHITE PAPER PULSED EDDY CURRENT Pulsed Eddy-Current (PEC) Inspection through Insulation Method statement of an advanced non-destructive testing technique for inspection through insulation.

More information

MACHINES DESIGN SSC-JE STAFF SELECTION COMMISSION MECHANICAL ENGINEERING STUDY MATERIAL MACHINES DESIGN

MACHINES DESIGN SSC-JE STAFF SELECTION COMMISSION MECHANICAL ENGINEERING STUDY MATERIAL MACHINES DESIGN 1 SSC-JE STAFF SELECTION COMMISSION MECHANICAL ENGINEERING STUDY MATERIAL C O N T E N T 2 1. MACHINE DESIGN 03-21 2. FLEXIBLE MECHANICAL ELEMENTS. 22-34 3. JOURNAL BEARINGS... 35-65 4. CLUTCH AND BRAKES.

More information

Enhancing Results NDT ULTRASONIC COUPLANTS

Enhancing Results NDT ULTRASONIC COUPLANTS NDT ULTRASONIC COUPLANTS NDT Couplants 7 The Sonotech 7 line of ultrasonic NDT couplants offers outstanding couplants with precisely formulated properties to maximize inspection results. Enhancing Results

More information

Detecting metal loss and pipeline wall thinning with a combination of Ultrasonic Testing (UT) and Magnetic Flux Leakage (MFL)

Detecting metal loss and pipeline wall thinning with a combination of Ultrasonic Testing (UT) and Magnetic Flux Leakage (MFL) Detecting metal loss and pipeline wall thinning with a combination of Ultrasonic Testing (UT) and Magnetic Flux Leakage (MFL) Wolfgang Krieg ROSEN Swiss AG Abstract In-line inspections with Ultrasonic

More information

A comparison of Techniques for Ultrasonic Inspection of Composite materials. Joe Buckley Sonatest Ltd. Milton Keynes, England,

A comparison of Techniques for Ultrasonic Inspection of Composite materials. Joe Buckley Sonatest Ltd. Milton Keynes, England, A comparison of Techniques for Ultrasonic Inspection of Composite materials Joe Buckley Sonatest Ltd. Milton Keynes, England, What are composites: Composite materials are engineered materials made from

More information

Module 8: Composite Testing Lecture 36: Quality Assessment and Physical Properties. Introduction. The Lecture Contains

Module 8: Composite Testing Lecture 36: Quality Assessment and Physical Properties. Introduction. The Lecture Contains Introduction In the previous lecture we have introduced the needs, background and societies for mechanical testing of composites. In this lecture and subsequent lectures we will see principles for the

More information

AWS B1.10M/B1.10:2009 An American National Standard. Guide for the Nondestructive Examination of Welds

AWS B1.10M/B1.10:2009 An American National Standard. Guide for the Nondestructive Examination of Welds An American National Standard Guide for the Nondestructive Examination of Welds An American National Standard Approved by the American National Standards Institute July 1, 2009 Guide for the Nondestructive

More information

Bridge Deck and Pavement Evaluation

Bridge Deck and Pavement Evaluation Using Ground Penetrating Radar, Infrared Thermography and High Resolution Imaging Technology Anthony Alongi, President Penetradar Corporation April 11, 2017 2017 NACE National Association of County Engineers

More information

5. POST-EARTHQUAKE INSPECTION

5. POST-EARTHQUAKE INSPECTION 5. POST-EARTHQUAKE INSPECTION When required by the building official, or recommended by the Interim Guidelines in Chapter 4, post-earthquake inspections of buildings may be conducted in accordance with

More information

FLUXUS F/G601 and F/G608

FLUXUS F/G601 and F/G608 Portable, quick and reliable FLUXUS F/G01 and F/G0 Portable ultrasonic clamp-on gas and liquid flow meters Accurate Flexible Quick Rugged Ergonomic When measuring matters FLUXUS F/G0X Mobile flow measurement

More information

Non-Destructive Evaluation of Concrete using Ultrasonic Pulse Velocity

Non-Destructive Evaluation of Concrete using Ultrasonic Pulse Velocity Research Journal of Applied Sciences, Engineering and Technology 3(6): 499-504, 2011 ISSN: 2040-7467 Maxwell Scientific Organization, 2011 Received: February 10, 2011 Accepted: May 13, 2011 Published:

More information

Pulsed Eddy Current Testing (PECT) Inspection Technique

Pulsed Eddy Current Testing (PECT) Inspection Technique Introduction Pulsed Eddy Current Testing (PECT) is an inspection technique used for corrosion under insulation (CUI) screening on carbon steel structures as pipes, vessels, tanks and spherical tank legs

More information

Dates of Innovation Development: January, 2014 to July 2015 Web site: Summary Description: Cathodic Protection

Dates of Innovation Development: January, 2014 to July 2015 Web site:  Summary Description: Cathodic Protection 2017 Award Nomination Title of Innovation: Ultrasound Cathodic Protection Test Station Nominee(s) Eugene (Gene) B. Silverman PhD, Berkeley Springs Instruments LLC Category: Cathodic Protection Coatings

More information

Thickness Detection of Corroded Steel Plate by Low-Frequency Eddy Current Testing

Thickness Detection of Corroded Steel Plate by Low-Frequency Eddy Current Testing 19 th World Conference on Non-Destructive Testing 2016 Thickness Detection of Corroded Steel Plate by Low-Frequency Eddy Current Testing Yuta HAGA, Tsuyoshi GODA, Kenji SAKAI, Toshihiko KIWA, Keiji TSUKADA

More information

Non Destructive Evaluation of Rolls of Hot Strip Mill of Tata Steel

Non Destructive Evaluation of Rolls of Hot Strip Mill of Tata Steel Non Destructive Evaluation of Rolls of Hot Strip Mill of Tata Steel J C Pandey, Manish Raj, & O N Mohanty NDE2002 predict. assure. improve. National Seminar of ISNT Chennai, 5. 7. 12. 2002 www.nde2002.org

More information

AWS B1.10:1999 An American National Standard. Guide for the Nondestructive Examination of Welds

AWS B1.10:1999 An American National Standard. Guide for the Nondestructive Examination of Welds AWS B1.10:1999 An American National Standard Guide for the Nondestructive Examination of Welds Key Words Guide, eddy current examination, magnetic particle examination, nondestructive examination, penetrant

More information

CIFRA MARKETING CORPORATION

CIFRA MARKETING CORPORATION CIFRA MARKETING CORPORATION CIFRA MARKETING CORPORATION CIFRA Marketing Corporation is a customer oriented company involved in the distribution of Non-Destructive Testing (NDT) practitioners with quality

More information

Application of linear frequency modulated excitation on ultrasonic testing for austenitic stainless steel welds

Application of linear frequency modulated excitation on ultrasonic testing for austenitic stainless steel welds Application of linear frequency modulated excitation on ultrasonic testing for austenitic stainless steel welds Sen Cong, Tie Gang, Jiaying Zhang State Key Lab of Advanced Welding &Joining, Harbin Institute

More information

Non Destructive Inspection Technology for Thermal Power Plants

Non Destructive Inspection Technology for Thermal Power Plants 37 Non Destructive Inspection Technology for Thermal Power Plants MIKIYASU URATA *1 KIYOTAKA AOKI *1 NAOYA URATA *2 KOICHI TAGAMI *2 MANABU KONDO *2 SHINTARO MATSUMOTO *3 In boiler facilities for thermal

More information

Smart Portable Wireless Leeb Hardness Solution

Smart Portable Wireless Leeb Hardness Solution Solutions since 1954 Smart Portable Wireless Leeb Hardness Solution From the inventor of Leeb Interactive Equotip Leeb D Complete Portfolio Equotip Live Wireless Real-time Data Sharing Cloud Backup Equotip

More information

Engineering Materials

Engineering Materials Engineering Materials Module 3: Destructive and Non- Destructive Testing PREPARED BY IAT Curriculum Unit August 2010 Institute of Applied Technology, 2010 2 Module 3: Destructive and Non-Destructive Testing

More information

Applied Materials. The Power of Trust. The Future of Energy.

Applied Materials. The Power of Trust. The Future of Energy. Applied The Power of Trust. The Future of Energy. Applied EXTENDING EQUIPMENT LIFE Fluorescent magnetic particle inspection Assessment of fracture features by scanning electron microscopy Failure analysis,

More information

Advancing with Technology

Advancing with Technology Advancing with Technology Coating thickness measurement MiniTest 4100 3100 2100 1100 Measurement of non-magnetic coatings (e. g. paint, zinc) on steel insulating coatings (e.g. paint, anodising coatings)

More information

Saint Petersburg State University, 7/9 Universitetskaya nab., St. Petersburg, Russia 2

Saint Petersburg State University, 7/9 Universitetskaya nab., St. Petersburg, Russia 2 5 Rev. Adv. Mater. Sci. 45 (016) 5-58 OPTOACOUSTIC INVESTIGATIONS OF MECHANICAL PROPERTIES OF ULTRAFINE-GRAINED ALUMINUM AD1 AFTER SEVERE PLASTIC DEFORMATION BY TORSION AND THERMAL TREATMENT B.N. Semenov

More information

Recent Advances in NDE Technologies for Turbines and Generators

Recent Advances in NDE Technologies for Turbines and Generators 17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China Recent Advances in NDE Technologies for Turbines and Generators Waheed A. ABBASI, Michael J. METALA SIEMENS Energy Service

More information

Acoustic Emisson and Ultrasonic Wave Characteristics in TIG-welded 316 Stainless Steel

Acoustic Emisson and Ultrasonic Wave Characteristics in TIG-welded 316 Stainless Steel Met. Mater. Int., Vol. 20, No. 3 (2014), pp. 483~488 doi: 10.1007/s12540-014-3011-8 Acoustic Emisson and Ultrasonic Wave Characteristics in TIG-welded 316 Stainless Steel Jin Kyung Lee 1, *, Joon Hyun

More information

There are many technologies available for

There are many technologies available for Engineering Technologies for Pipeline Asset Management Bryon L. Livingston, Ahmad Habibian, and Dan Kugler There are many technologies available for managing the condition of underground infrastructure,

More information

Drop Weight Impact Testing Machine DIT183E 1800J

Drop Weight Impact Testing Machine DIT183E 1800J Do Our Best for Your Test Drop Weight Impact Testing Machine DIT183E 1800J Functions This type of machine is especially designed for drop-weight test of pipe and plate (including plastics, ceramic, Nylon,

More information

Nondestructive Examination

Nondestructive Examination Nondestructive Examination by Roger Cantrell Learning Objectives This course introduces the student to the basic concepts of six Nondestructive Examination (NDE) methods used in construction and periodic

More information

Correlation of Hardness Values to Tensile Strength

Correlation of Hardness Values to Tensile Strength Correlation of Hardness Values to Tensile Strength Semih Genculu, P.E. Various procedures and approaches are utilized to determine if a given material is suitable for a certain application. The material

More information

Michael T. Anderson, Stephen E. Cumblidge, Steven R. Doctor Pacific Northwest National Laboratory, Richland, WA, USA

Michael T. Anderson, Stephen E. Cumblidge, Steven R. Doctor Pacific Northwest National Laboratory, Richland, WA, USA THROUGH WELD INSPECTION OF WROUGHT STAINLESS STEEL PIPING USING PHASED ARRAY ULTRASONIC PROBES Michael T. Anderson, Stephen E. Cumblidge, Steven R. Doctor Pacific Northwest National Laboratory, Richland,

More information

Moisture analyzers (moisture meters) FIZEPR-SW100

Moisture analyzers (moisture meters) FIZEPR-SW100 www.fizepr.ru Design Bureau FIZELEKTRONPRIBOR Moisture analyzers (moisture meters) FIZEPR-SW100 for liquid, paste-like and bulk materials including petroleum, fuel oil, sand, coal, ore, concrete mixture,

More information

Handheld Solution for Measurement of Residual Stresses on Railway Wheels using EMATs

Handheld Solution for Measurement of Residual Stresses on Railway Wheels using EMATs 19 th World Conference on Non-Destructive Testing 2016 Handheld Solution for Measurement of Residual Stresses on Railway Wheels using EMATs Jesus Antonio JIMENEZ 1, Victor GARCIA 1, Carlos BOYERO 1 1 Innerspec

More information

PROCESS TO REDUCE REJECTION RATES OF FORGING DEFECTS

PROCESS TO REDUCE REJECTION RATES OF FORGING DEFECTS PROCESS TO REDUCE REJECTION RATES OF FORGING DEFECTS ABSTRACT- this paper deals with the various forging defects that occur in a forging industry that causes high rejection rates in the components and

More information

Chemical Analysis SEM/EDS. Spectroscopy. Carbon, Sulfur, Nitrogen and Oxygen Analysis

Chemical Analysis SEM/EDS. Spectroscopy. Carbon, Sulfur, Nitrogen and Oxygen Analysis Chemical Analysis For over 30 years, APL, Inc. has been providing accurate and timely chemical analyses to our clients. To allow for the most efficient analysis of your material, a wide variety of spectrometers

More information

Stress Testing is a New NDT Type in the Russian Standard GOST R and International Standard ISO-9712.

Stress Testing is a New NDT Type in the Russian Standard GOST R and International Standard ISO-9712. 17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China Stress Testing is a New NDT Type in the Russian Standard GOST R 52330-2005 and International Standard ISO-9712. Anatoly

More information

DETERMINING THE STRENGTH OF SOLID BURNT BRICKS IN HISTORICAL STRUCTURES

DETERMINING THE STRENGTH OF SOLID BURNT BRICKS IN HISTORICAL STRUCTURES 9th International Conference on NDT of Art, Jerusalem Israel, - May 8 For more papers of this publication click: www.ndt.net/search/docs.php?mainsource=6 DETERMINING THE STRENGTH OF SOLID BURNT BRICKS

More information

Introduction to Engineering Materials ENGR2000 Chapter 8: Failure. Dr. Coates

Introduction to Engineering Materials ENGR2000 Chapter 8: Failure. Dr. Coates Introduction to Engineering Materials ENGR2000 Chapter 8: Failure Dr. Coates Canopy fracture related to corrosion of the Al alloy used as a skin material. 8.2 Fundamentals of Fracture Fracture is the separation

More information

PORTABLE HARDNESS TESTERS

PORTABLE HARDNESS TESTERS PORTABLE HARDNESS TESTERS PORTABLE HARDNESS TESTING INNOVATEST offers a wide range of portable hardness testing instruments. Most of the common testing methods are represented in this catalogue. Portable

More information

Weld defects analysis of 60 mm thick SS316L mock-ups of TIG and EB welds by Ultrasonic inspection for fusion reactor vacuum vessel applications

Weld defects analysis of 60 mm thick SS316L mock-ups of TIG and EB welds by Ultrasonic inspection for fusion reactor vacuum vessel applications More info about this article: http://www.ndt.net/?id=21122 Weld defects analysis of 60 mm thick SS316L mock-ups of TIG and EB welds by Ultrasonic inspection for fusion reactor vacuum vessel applications

More information

PHYSICAL AND CHEMICAL PROPERTIES OF POLYMER IMPREGNATED CONCRETE ON THE PREPARATION CONDITIONS

PHYSICAL AND CHEMICAL PROPERTIES OF POLYMER IMPREGNATED CONCRETE ON THE PREPARATION CONDITIONS PHYSICAL AND CHEMICAL PROPERTIES OF POLYMER IMPREGNATED CONCRETE ON THE PREPARATION CONDITIONS * ** Won Mook Lee, J Priya Nair, Chul Woo Lee, Du Hyun Ku, Jeong Soon Park, Hun Young Park Department of Chemical

More information

NUMERICAL SIMULATION AND EXPERIMENTAL RESEARCH ON CRACK MAGNETIC FLUX LEAKAGE FIELD

NUMERICAL SIMULATION AND EXPERIMENTAL RESEARCH ON CRACK MAGNETIC FLUX LEAKAGE FIELD Proceedings of the ASME 2011 Pressure Vessels & Piping Division Conference PVP2011 July 17-21, 2011, Baltimore, Maryland, USA PVP2011-57514 NUMERICAL SIMULATION AND EXPERIMENTAL RESEARCH ON CRACK MAGNETIC

More information

Monitoring Of Adhesive Cure Process and Following Evaluation of Adhesive Joint Structure by Acoustic Techniques

Monitoring Of Adhesive Cure Process and Following Evaluation of Adhesive Joint Structure by Acoustic Techniques ECNDT 006 - We... Monitoring Of Adhesive Cure Process and Following Evaluation of Adhesive Joint Structure by Acoustic Techniques Elena Yu. MAEVA, Ina SEVIARYNA, Gilbert B. CHAPMAN, Fedar M. SEVERIN University

More information

Using Thermal Integrity Profiling to Confirm the Structural Integrity of foundation applications

Using Thermal Integrity Profiling to Confirm the Structural Integrity of foundation applications Using Thermal Integrity Profiling to Confirm the Structural Integrity of foundation applications Authors: 1. George Piscsalko, PE, Pile Dynamics, Inc., 30725 Aurora Road, Solon, Ohio, USA, gpiscsalko@pile.com;

More information

Always ready for the track: Asset Management

Always ready for the track: Asset Management Always ready for the track: Asset Management Rail Inspection Data Processing Training and Consulting Inspections WE MAINTAIN WHAT YOU VALUE Rail defects form during manufacture and over the rail s entire

More information

Comparison of BS and BS EN for steel materials

Comparison of BS and BS EN for steel materials Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of

More information

Integrity evaluation of concrete by cross-hole sonic logging in Bangladesh

Integrity evaluation of concrete by cross-hole sonic logging in Bangladesh IABSE-JSCE Joint Conference on Advances in Bridge Engineering-III, August 2-22, 25, Dhaka, Bangladesh. ISBN: 978-984-33-933-5 Amin, Okui, Bhuiyan, Ueda (eds.) www.iabse-bd.org Integrity evaluation of concrete

More information

Conveyor System Technology. krones AirCo. Air Conveyor

Conveyor System Technology. krones AirCo. Air Conveyor Conveyor System Technology krones AirCo Air Conveyor Gentle Product Conveyance The krones AirCo conveyor links the systems of a bottling line, and provides an important integral part of a smoothly running

More information

Coating Thickness Gauge Model: AX-CTG10 User s Manual

Coating Thickness Gauge Model: AX-CTG10 User s Manual Coating Thickness Gauge Model: AX-CTG10 User s Manual Coating Thickness Gauge Model:AX-CTG10 Introduction AX-CTG10 coating thickness gauge adapts principles of electromagnetic induction and magnetic induced

More information

Experimental Investigation of the Galvanization. Effects on the Properties of. Low Carbon Alloy Steel

Experimental Investigation of the Galvanization. Effects on the Properties of. Low Carbon Alloy Steel Adv. Theor. Appl. Mech., Vol. 5, 2012, no. 5, 225-236 Experimental Investigation of the Galvanization Effects on the Properties of Low Carbon Alloy Steel Ghazi S. Al-Marahleh Department of Mechanical Engineering,

More information

IMPACT ECHO TESTING OF IN-SITU PRECAST CONCRETE CYLINDER PIPE

IMPACT ECHO TESTING OF IN-SITU PRECAST CONCRETE CYLINDER PIPE IMPACT ECHO TESTING OF IN-SITU PRECAST CONCRETE CYLINDER PIPE Dennis A. Sack; Larry D. Olson, P.E. 1 Abstract This paper presents recent research and field work performed in the area of Nondestructive

More information

Development of an Ultrasonic C-Scan Imaging Technique for Optimization of Electro Magnetic Stirrer to Improve Steel Billet Quality

Development of an Ultrasonic C-Scan Imaging Technique for Optimization of Electro Magnetic Stirrer to Improve Steel Billet Quality 18th World Conference on Nondestructive Testing, 16-20 April 2012, Durban, South Africa Development of an Ultrasonic C-Scan Imaging Technique for Optimization of Electro Magnetic Stirrer to Improve Steel

More information

M. J. Johnson, H. Cao and J. C. Moulder Center for Nondestructive Evaluation Iowa State University Ames, Iowa 50011

M. J. Johnson, H. Cao and J. C. Moulder Center for Nondestructive Evaluation Iowa State University Ames, Iowa 50011 EDDY-CURRENT AND MAGNETIC MEASUREMENTS ON CASE-HARDENED STEEL M. J. Johnson, H. Cao and J. C. Moulder Center for Nondestructive Evaluation Iowa State University Ames, Iowa 50011 INTRODUCTION The problem

More information

Sby SR Instruments, Inc.

Sby SR Instruments, Inc. Part No.: MAN947IFS_170629 Page 1 of 12 Sby SR Instruments, Inc. SRV947IFS REMOTE DISPLAY PLATFORM SCALE Operating and Service Manual Part No.: MAN947IFS_170629 Page 2 of 12 TABLE OF CONTENTS TABLE OF

More information

Ultrasonic testing of adhesive bonds of thick composites with applications to wind turbine blades

Ultrasonic testing of adhesive bonds of thick composites with applications to wind turbine blades Center for Nondestructive Evaluation Conference Papers, Posters and Presentations Center for Nondestructive Evaluation 7-2011 Ultrasonic testing of adhesive bonds of thick composites with applications

More information

DETECTION OF INCLINED CRACKS INSIDE CONCRETE STRUCTURES BY ULTRASONIC SAFT

DETECTION OF INCLINED CRACKS INSIDE CONCRETE STRUCTURES BY ULTRASONIC SAFT 2007 Review of Progress in Quantitative NDE, Golden, Colorado, July 22 July 27, 2007. DETECTION OF INCLINED CRACKS INSIDE CONCRETE STRUCTURES BY ULTRASONIC SAFT Moe Momayez 1, Zahra Hosseini 2, Ferri Hassani

More information

3. Mechanical Properties of Materials

3. Mechanical Properties of Materials 3. Mechanical Properties of Materials 3.1 Stress-Strain Relationships 3.2 Hardness 3.3 Effect of Temperature on Properties 3.4 Fluid Properties 3.5 Viscoelastic Properties Importance of Mechanical Properties

More information

Health Assessment Of Reinforced Concrete Structures - A Case Study

Health Assessment Of Reinforced Concrete Structures - A Case Study IOSR Journal of Mechanical & Civil Engineering (IOSR-JMCE) ISSN: 2278-1684, PP: 37-42 www.iosrjournals.org Health Assessment Of Reinforced Concrete Structures - A Case Study Prof. Dr.D.K.Kulkarni. Professor,

More information

Nondestructive material testing services

Nondestructive material testing services NDT SERVICES Nondestructive material testing services Conventional nondestructive inspections and automated ultrasonic single- and serial inspection At your site or in our NDT Service Centre in Burgwedel

More information

PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGINGS

PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGINGS p 1 of 6 UF-1 UF-12 PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGING the test temperature be higher than 20 F ( 29 C). Certification is required. An ultrasonic examination shall be made

More information

Repetition: Adhesion Mechanisms

Repetition: Adhesion Mechanisms Repetition: Adhesion Mechanisms a) Mechanical interlocking b) Monolayer/monolayer c) Chemical bonding d) Diffusion e) Psedo diffusion due to augmented energy input (hyperthermal particles) Repetition:

More information

M3 Review Automated Nanoindentation

M3 Review Automated Nanoindentation M3 Review Automated Nanoindentation Prepared by Duanjie Li, PhD & Pierre Leroux 6 Morgan, Ste156, Irvine CA 92618 P: 949.461.9292 F: 949.461.9232 nanovea.com Today's standard for tomorrow's materials.

More information

Validation of an Ultrasonic-Phased-Array-Method for Testing of Circumferential Welds at Thin-walled Pipes

Validation of an Ultrasonic-Phased-Array-Method for Testing of Circumferential Welds at Thin-walled Pipes 19 th World Conference on Non-Destructive Testing 2016 Validation of an Ultrasonic-Phased-Array-Method for Testing of Circumferential Welds at Thin-walled Pipes Susanne HILLMANN 1, Frank SCHUBERT 1, David

More information

MICROWAVE INSPECTION METHOD AND ITS APPLICATION TO FRP

MICROWAVE INSPECTION METHOD AND ITS APPLICATION TO FRP MICROWAVE INSPECTION METHOD AND ITS APPLICATION TO FRP MTI AmeriTAC 2013 Robert J Stakenborghs General Manager Evisive, Inc. Baton Rouge, Louisiana, USA 1 OBJECTIVES Describe FRP and GRP Discuss failure

More information

Contact Laser Ultrasonic Evaluation (CLUE) of Aerospace Materials and Parts

Contact Laser Ultrasonic Evaluation (CLUE) of Aerospace Materials and Parts More International Laser Center of M.V. Lomonosov Moscow State University LASER OPTOACOUSTIC LABORATORY Contact Laser Ultrasonic Evaluation (CLUE) of Aerospace Materials and Parts Authors: Alexander A.

More information

Material Properties Measurement

Material Properties Measurement Material Properties Measurement Nondestructive Characterization of Neutron Induced Embrittlement in Nuclear Pressure Vessel Steel Microstructure by Using Electromagnetic Testing I. Altpeter, G. Dobmann,

More information