FORGED PRODUCTS & FLANGE FITTING PIPE TUBE PLATE AND OTHER MATERIALS

PHOENIX TUBES & FITTINGS. Corrosion resistant. Exotic materials. International Quality. Effecient supply chain management. Fast track delivery

Effecient supply chain management Corrosion resistant International Quality Exotic materials Fast track delivery AN ISO 9001:2008 CO. Company Profile In the lifeline of industries, our fittings make sure

DOOWON HIGH STEEL CO.,LTD.

DOOWON HIGH STEEL CO.,LTD. INTRODUCTION OF COMPANY Head Office : 7-344 Industrial Tools Circulating Center #152-2, Gamjeon1-dong, Sasang-gu, Busan, 617-803,Korea Tel: +82-51-311-3613 / Fax: +82-51-311-3614

STOCKIST SUPPLIERS & EXPORTERS:

PIPES & TUBES: Stainless Steel: ASTM A 312, A 213, A 213, A 249, A 269, A 358, A 240, A 276 Type: 202, 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S, 409, 410, 420, 430 etc. Carbon

The Master of Master Distribution

The Master of Master Distribution Stainless and Special Metals Pipe and Tubing Pipe Fittings Pipe Flanges Valves Supplying stainless products to industrial distributors since 1963 MASTER OF MASTER DISTRIBUTION

PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings.

Stainless, DUPLEX, Super Duplex flanges and fittings PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings. introduction Our inventory consists

WELCOME TO TRUS GLOBAL CO.,LTD TOTAL SOURCING SOLUTION COMPANY

WELCOME TO GLOBAL CO.,LTD TOTAL SOURCING SOLUTION COMPANY 1. Index 1. Index 2. Introduction 3. Pipe Supply 4. Fitting Supply 5. Flange Supply 6. Hammer Wing Union Supply 7. Bolt / Nut Supply 8. Gasket

A.Z.E. SUPPLY COMPANY

PIPE * VALVES * FITTINGS COMMERCIAL * MARINE * MILITARY CAGE : OBGU9 CREDIT CARDS ACCEPTED FOR PURCHASE PIPE AND TUBING Carbon Steel A53, A106, A500, A512, A513 Stainless A312, A213, A269, GR.304, 304L,

+91-8048078804 Prayas Steel & Alloys http://www.stainlesssteelscraps.com/ We are importers, stockiest & suppliers of ferrous, non ferrous metal and scrap. Our range of ferrous & non ferrous metal products

PRODUCT: WELDED PIPE SPECIFICATION: 355.6*9.52 MATERIAL: S32205 PRODUCT: SEAMLESS PIPE. SPECIFICATION: Φ33mm*1mm MATERIAL: S31803

Special Piping Materials is renowned for the high volume of Duplex and Super Duplex products that it stocks. It supplies these materials to countless companies around the world who use its product s in

This specification describes the minimum requirements for piping systems for the following service:

1.0 APPLICATION 2017/0/12 1/ This specification describes the minimum requirements for piping systems for the following service: Process Water or Underground Dewatering Service piping systems at pressures

Chrome Moly flanges and fittings

Chrome Moly flanges and fittings PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings. introduction Our inventory consists of a complete range

Main page Capacity Quality control Pipe fitting Flange Valve

Welcome to visit CN pipeline s profile. To learn our experience and benefit yourself in Pipeline fields Pipe fitting C&N pipeline Ltd is a leading supplier and exporter of all kinds of pipeline products

STOCK LIST COQUITLAM, BC, CANADA SHEET PLATE COIL PIPE TUBE ROD BAR FITTINGS FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL

STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL COQUITLAM, BC, CANADA S T AINLESS STEEL ALLOYS 303, 304, 304L, 316, 316L, 317L,

HINDON FORGE PVT. LTD.

www.hindonforge.net Hammering Quality into Forgings An ISO 9001:2000 Certified Co. HINDON FORGE PVT. LTD. Manufacturers of Critical Steel Forgings and Flanges MANUFACTURERS & EXPORTERS OF ALL KINDS OF

ULMA Piping. We don t just manufacture, We partner.

ULMA Piping We don t just manufacture, We partner. 02 ULMA Piping 01 ULMA Piping ULMA Piping is a world-class manufacturer with a long tradition of efficiency and excellence. We manufacture and supply

MESSAGE FROM BOARD WE ASSURE THE BEST OF THE SERVICES!!! Sincerely. Talal al fareji General Manager

MESSAGE FROM BOARD Our sincere thanks to ALLAH and those who are supporting our Business activities of the company. We focus completely on our customer satisfaction. We value for their money '' Our unique

Section 20. Globe Valves

Section 20 A globe valve is a type of valve used for regulating flow in a pipeline, consisting of a movable disk-type element and a stationary ring seat in a generally spherical body. Globe valves are

ULMA Piping. We don t just manufacture, We partner.

ULMA Piping We don t just manufacture, We partner. 01 ULMA Piping ULMA Piping is a world-class manufacturer with a long tradition of efficiency and excellence. We manufacture and supply the piping industry

SEA Certified Piping Design Engineer

SEA Certified Piping Design Engineer Certification Course Course Title Eligibility Criteria : SEA CERTIFIED PIPING DESIGN ENGINEER : Mechanical Engineer, Chemical & Petroleum Engineer Duration of Course

STOCKISTS OF : PIPES & TUBES

OHSAS 18001:2007 CERTIFIED ISO 9001:2008 CERTIFIED ISO 14001:2004 CERTIFIED PED CERT NO 01 202 IND/Q-11-0033 GOVT. RECOGNIZED EXPORT HOUSE Since Since 37 Years A RELIABLE GROUP OF COMPANIES MANUFACTURERS

PREMIUM MILLS, PREMIUM STEEL. Linepipe Seamless Pipe/O.C.T.G Stainless Steel Pipe and Tube Steel Plate Fitting & Flange Wind Tower

PREMIUM MILLS, PREMIUM STEEL Linepipe Seamless Pipe/O.C.T.G Stainless Steel Pipe and Tube Steel Plate Fitting & Flange Wind Tower Premium mills, premium steel Petrosteel Technologies General Catalogue

Master Valve USA w w w. M a s t e r Va l v e U S A. c o m

Master Valve USA w w w.mastervalveusa.com Quality Controls All manufacturing is conducted under ISO 9001 certified quality management system Products are stringently manufactured in accordance with applicable

CONTOUR BODIED FLANGE BRANCH FITTINGS Incorporating the design and manufacture of specialised piping products

BURTON DELINGPOLE FLANGES AND FITTINGS CONTOUR BODIED FLANGE BRANCH FITTINGS Incorporating the design and manufacture of specialised piping products Contoured Bodied Flange Branch Fittings Buttweld Branch

GD Valves Rubber Lined - Centric EVS. Wouter Witzel - EVS /

DESIGN Body Flangeless wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E JIS 5K/10K/16K Face to Face EN558-1/2

SKYLINE FLOW CONTROLS INC.

SKYLINE FLOW CONTROLS INC. SFC Skyline Flow Controls Venturi Meter (SFC-FV) The SFC Venturi Tube is a differential pressure flow element that accurately measures the flows of liquids or gases. SFC utilizes

NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH

NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES XH With over 40 years of experience with trunnionmounted ball valves, Metso has designed this ball valve to mount on two large, low-friction trunnion

ISO INTERNATIONAL STANDARD. Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries

INTERNATIONAL STANDARD ISO 10434 Second edition 2004-07-15 Bolted bonnet steel gate valves for the petroleum, petrochemical and allied industries Robinets-vannes en acier à chapeau boulonné pour les industries

Mueller Gas Products. Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI

Mueller Gas Products Distributed by: Mountain States Pipe and Supply Colorado Springs, Colorado 80903 1 800 777 7173 Mueller H17650 H17656 No Blo Service Stop Tee Weld x Weld 250 PSI MUELLER NO-BLO FORGED

Product Range & Specifications PIPES

Product Range & Specifications PIPES All rights reserved. Any unauthorized reproductions, exhibition, distribution or communication of this material can result in severe criminal and civil penalties. Dimensions

We Offer Both Cast Ball Valves & Forged Ball Valves.

11 GENEL SCREWED END BALL VALVES / FORGED BALL VALVES V-155 THREE PIECES BALL VALVES V-255 Full port : 1/4 2-1/2 (DN8-DN65) : 3/8 2-1/2 (DN10-DN65), Anti-static design ASTM A351 Gr.CF8M (1.4408) Full port

INTERNATIONAL STANDARD

INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape

D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Valves. MUELLER Tapping Sleeves and Crosses. MUELLER Stainless Steel Tapping Sleeves

TAPPING VALVE MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D. PVC--Also outlet sealed

GS_-FLANGE SYS SAE 6000 PSI INFORMATION GENERAL. Type Approvals 17

GENERAL SAE 6000 PSI GS-FLANGE Product Page HYDRAULIC PIPES 10-40 BAR SAE 50 BAR SAE 3000 PSI SAE 6000 PSI DIN 350-400 BAR SCHEDULE SERIE SAE 3000 PSI 1 Type Approvals 17 Retain Ring- and 37 Flare Flange

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service 1

Designation: A 234/A 234M 02 Used in USDOE-NE Standards An American National Standard Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature

Rosemount 405 Compact Orifice Primary Element

Rosemount 405 Compact Orifice Primary Element SPECIFICATIONS Performance Discharge Coefficient Uncertainty TABLE 20. 405 Compact Orifice Primary Element Type 405C (Conditioning Compact) 405P (1)(2) (Standard

SAPAG. A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Safety Relief Valve Series 8100/8200

SAPAG A full range of API 526 flanged safety relief valves for process applications, gas, steam and liquid. Features Full compliance to API RP 520 and standards 526, 527. Certified ASME Section VIII on

D1 Series Multi-hole Cage Guided Control Valves

D1 Series Multi-hole Cage Guided Control Valves Model D1M Overview Model D1M globe control valves are with bolted bonnet and multi-hole cage guided trims. The design facilitates easy access to internal

Cryogenic Metal Seated Butterfly Valves

Cryogenic Metal Seated Butterfly Valves The Key to Cryogenic Valve Solutions VELAN S.A.S VELAN Inc Group VELAN inc is one of the world's leading independent manufacturer of steel gate, globe, check, butterfly

&If STEEL TUBES INDIA. Introduction. (( mh{ mil \.. m). / PED 97/23/EC Certified Co.

Introduction Tube Seamless to ASTM A269, imperial sizes from 1 /8 O/D x 24swg to 4 O/D x 1 /4 wall in grade 316L Seamless to ASTM A269, grades 304L & 316L, in metric sizes 6mm O/D x 0.5mm wall to 38mm

DISTRIBUTED VALVES. DEMCO Gate Valves DEMCO

Gate Valves 2 TABLE OF CONTENTS Gate Valves Introduction... 4 Series DM Gate Valves... 5 Series DM 7500 Gate Valves... 7 Series DT/DB Gate Valves... 9 PRODUCT SPECIFICATIONS General Technical Information...

AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS)

AVK (WWE) BUTTERFLY VALVE DN 50 to DN 2000 (2" to 80") 75 (EVFS) Double Flanged type Design code EN593 Flange connection to EN 1092 PN 6, 10, 16 DESIGN Body Double Flanged type End Connection EN 1092 PN

1.2 ACTION AND INFORMATIONAL SUBMITTALS.1 Provide submittals in accordance with Section Submittal Procedures.

BID OPPORTUNITY NO. 253-2011 PAGE 1 OF 7 PART 1 GENERAL 1.1 REFERENCES.1 American Society of Mechanical Engineers (ASME).1 ASME B31.1, Power Piping, B31.3 Process Piping, B31.9 Building Services Piping..2

Thinking big. Acting bold.

Thinking big. Acting bold. About us Established in 1990, Sanghvi Forging is among the country s fastest growing forging players. Our products Tool Steel Forged Flanges Heavy Forgings Machined Forgings

Pressure Relief Valves. 1900/P Series. Consolidated Safety Relief Valve

Pressure Relief s 1900/P Series Consolidated Safety Relief Table of Contents Conversion Table..................................................... 1900/P.2 Features & Benefi ts...................................................

TEL: FAX: NJ:

PRICE SCHEDULE 710 Effective July 6, 2010 Stainless Steel Pipe Fittings TEL: 800-526-4346 FAX: 732-382-7145 NJ: 732-382-7272 WWW.DASONSTAINLESS.COM 1773 Elizabeth Ave, Rahway, New Jersey 07065 MSS-SP-114

DONGWOO E&C Tube & Pipe Division

Tube & Pipe Division we are ready to be a new global market leader. Cu-Ni / Brass / Al-Brass / Copper Head Office : #284-17 Jinjang-dong, Buk-gu, Ulsan, Korea (683-350) TEL : +82-52-288-1862 FAX : +82-52-288-1863

GLOBAL SOURCE GLOBAL SUPPLY

MAJOR MANUFACTURERS RELIABILITY IN SUPPLY Sferova s production capability includes forged API6D Ball valves Australian Pipeline Valve (APV) manufacture Ball, Gate, Globe, in sizes 15NB through 1000NB (1/2

Terrain HDPE. Product Guide

TAGIG1-PT JULY 2009 Terrain HDPE Product Guide Terrain HDPE BBA BRITISH BOARD OF AGRÉMENT CERTIFICATE No. 07/4479 A modern high density polyethylene system with many advantages over cast iron and other

With World Class Quality

Gaskets With World Class Quality Superlite Jointings Private Limited ( AN ISO /TS : 16949-2009 COMPANY ) Mounting Instructions The principle The spiral wound function is based on the metal winding/ filler

Section 11. API 7500lb Mud Gate Valves

Section 11. API 7500lb Mud Gate Valves Section 11a API 7500lb Rubber Seated Mud Gate Valves Gate Valves are designed and manufactured in accordance with the following specifications:- API 6A ANSI B31.3

Marley Air Cooled Heat Exchangers

Marley Air Cooled Heat Exchangers SPX: The Informed Choice for the Demands of Today and Tomorrow SPX Cooling Technologies has the experience, engineering expertise and in-factory manufacturing capabilities

UL / FM D-1 FIRE PROTECTION PRODUCTS TAPPING VALVE. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves

UL / FM TAPPING VALVE SECTION Rev. 2-15 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including cast iron, ductile iron, A-C, and cast iron O.D.

ALL METALS & FORGE GROUP

ALL METALS & FORGE GROUP All Metals & Forge Group is an ISO9001:2008, AS/EN9100:2009 Rev. C manufacturer of open die forgings and seamless rolled rings, a certification it obtained and has held since 1994.

Compact CATALOG. Performance. Safety Relief Valves Series 437 Series 459. The-Safety-Valve.com

Compact Performance Safety Relief Valves Series 437 Series 459 CATALOG The-Safety-Valve.com Valve Finder Product group High operating to set pressure ratio, high backpressure or low total height? Yes High

NEOTISS TM HPT finned TubES

NEOTISS TM HPT finned tubes p.2 / NEOTISS NEOTISS / p.3 Nomenclature Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Type 7 Type 8 Type 9* Material 30 FPI.032 inch.813 mm 28 FPI inch mm 26 FPI inch mm 36 FPI.026

DIVISION 15-MECHANICAL SECTION SUPPORTS AND ANCHORS PN PART 1 - GENERAL 1.01 SECTION INCLUDES. A. Pipe and equipment support systems.

PART 1 - GENERAL 1.01 SECTION INCLUDES A. Pipe and equipment support systems. B. Inserts. 1.02 RELATED SECTIONS A. Section 15890 - Ductwork Supports. 1.03 DEFINITIONS A. Supports: Attachments, hangers,

YARWAY HANCOCK CONTINUOUS BLOWDOWN GLOBE VALVE SERIES 5505

Advanced construction features of this high pressure drop angle globe valve provide quality and long service life. FEATURES GENERAL APPLICATION In addition to continuous blowdown service, the Yarway high

NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X

NELES TRUNNION MOUNTED, BALL VALVES, FULL BORE, SERIES X Metso's Neles series X is a trunnion modular ball valve. Neles X series valves incorporate robust stem to ball connection. This assures valves are

12.1 MUELLER TAPPING MATERIALS AND SPECIALTY VALVES. MUELLER Tapping Sleeves and Crosses. MUELLER Tapping Valves. MUELLER Stainless Steel Tapping

MUELLER TAPPING MATERIALS AND SPECIALTY VALVES 12.1 Shaded area indicates change Rev. 7-16 MUELLER Tapping Sleeves and Crosses Full range of Tapping Sleeves and Crosses to fit most types of pipe including

Corporation SEAMLESS PIPE

Corporation SEAMLESS PIPE Pipe Applicable Standards ASTM Pipe Code Designations A 106/A 106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service A 312/A 312M Standard Specification

PRACTICAL PIPING COURSE

PRACTICAL PIPING COURSE OUTLINE 1. Introduction 1.1. Definition of Piping 3 1.2. Piping Nomenclature & Components 4 1.3. Regulatory Acts, Codes & Standards 6 1.4. Line Designation Tables 8 Problem Set

A. Pipe, pipe fittings, valves, and connections for piping systems. 1. Sanitary sewer. 2. Domestic water. 3. Storm water. 4. Gas.

SECTION 221005 - PLUMBING PIPING PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, pipe fittings, valves, and connections for piping systems. 1. Sanitary sewer. 2. Domestic water. 3. Storm water. 4. Gas. 1.2

MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING

SECTION 221316 - SANITARY WASTE AND VENT PIPING PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following soil and waste, sanitary drainage and vent piping inside the building: 1. Pipe, tube,

Stainless Steel Aeration Equipment Specification

Section 15 Stainless Steel Aeration Equipment Specification Part 1 - General 1.01 Description A. Scope of Work 1. Furnish, install and test aeration system including air mains, drop pipes, valves, expansion

PRODUCT CATALOG. TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. amerpipe.com

PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 825 Maryville

Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification

ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64

ANSI CLASS 150/300/ 600 PN 10/16/25/40/ 64 HIGH-SEAL features Suitable for a wide range of applications from vacuum to very high pressure and low to very high temperature services. Also suitable for severe

8mm - 50mm (1/4-2 ) api 602 bs asme b16.34 mss sp 84

L&T FORGED STEEL GATE, GLOE & CHECK VALVES ASME 150-2500 8mm - 50mm (1/4-2 ) api 602 bs 5352 S 6364 asme b16.34 mss sp 84 Introduction L&T Forged Steel Gate, Globe and Check Valves have established themselves

Consolidated* Electromatic* Ball Valves

GE Oil & Gas Technical Specifications 05/2012 3500 Series Consolidated* Electromatic* Ball Valves Provides automatic or manual overpressure startup for steam boiler systems and assists startup and shutdown

EDMONTON EXCHANGER GROUP OF COMPANIES - FIELD SERVICES Edmonton Exchanger was founded in 1975 and is over 1,000 employees strong.

Field Services EDMONTON EXCHANGER GROUP OF COMPANIES - FIELD SERVICES Edmonton Exchanger was founded in 1975 and is over 1,000 employees strong. We are a multi-divisional company and feature a wide range

Sample Report: ½ Tri-Clamp Flange Connection

Ph: 520-265-3657 Fax: 888-241-3035 mailto:info@keydesigneng.com Sample Report: ½ Tri-Clamp Flange Connection Prepared by: Michael Rodgers, P.Eng. Date: Saturday, August 07, 2010 Project: KEY-026 is a Canadian

Diffused Aeration Piping Equipment

1.0 General 1.1. The specifications in this section include all components of the Diffused Aeration System with the exception of the individual diffuser units. Refer to additional specification sections

International Standard Valve, Inc.

International Standard Valve, Inc. 10749 Cash Road, Stafford, Texas 77477 713-983-7600 TM ISV s standards are their special options is a registered trademark of International Standard Valve, Inc. www.isvalve.com

CONA -Universal ANSI / CONA -Connector ANSI

CONA -Universal ANSI for quick assembly/disassembly on CONA -Connector or foreign system connectors CONA -Universal ANSI / CONA -Connector ANSI CONA B-Universal ANSI Bimetallic steam trap ANSI CONA M-Universal

SECTION PLUMBING PIPING

SECTION 22 10 00 PLUMBING PIPING PART 1 GENERAL 1.1 SCOPE A. Work consists of all plumbing work indicated on drawings and specified herein. B. Included are requirements for fees/permits for installation

FLANGE DIMENSIONS TABLE TYPES

ADELAIDE BRISBANE PERTH OVERVIEW FLANGE DIMENSIONS TABLE TYPES In Australia the BS and AS fl ange standards are essentially the same but have been metricated. Consequently metric sizes are stated as DN

Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1

87J-200 SERIES Duplex Stainless Steel ASME Class 150 Flanged Full Port Ball Valve - 1/2 through 1 For STANDARDS COMPLIANCE and STANDARD FEATURES refer to page D-3. STANDARD MATERIAL LIST PART (1/2 & 3/4

Essex County College - West Essex Campus Addition And Renovations Dib # / SECTION DOMESTIC WATER PIPING SPECIALTIES

Essex County College - West Essex Campus Addition And Renovations Dib # 54292 / 11-14 SECTION 221119 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions

A Master Distributor of Stainless Steel Industrial Products PIPES FLANGES PIPE FITTINGS PLATES BARS

A Master Distributor of Stainless Steel Industrial Products PIPES FLANGES PIPE FITTINGS PLATES BARS We are ALINOX, A Master Distributor of Stainless Steel industrial items; new entity of Ali N. Al-Nassar

ROUND - CARBON AND LOW ALLOY STEEL - CONTINUOUS FORMING Oil, gas, chemicals conveyance (ambient temperature)

Part 1 - Section 2 Detailed information on manufacturers 1 MAVERICK TUBE CORPORATION NORTH AMERICA General information Company founded in 1978 Nb of employees: 1000 Web site: www.maverick-tube.com Tube

Introduce ESteel Corporation.

Introduce ESteel Corporation. We, ESteel Corporation. were established in 2001 and a privately manufacturer and exporter & importer. ESteel is one of the leading companies in Korea dealing with all kinds

(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION

17.11.2017 EN Official Journal of the European Union C 389/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework

Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings 1

Designation: A 403/A 403M 06 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings 1 This standard is issued under the fixed designation A 403/A 403M; the number immediately following

Suffix for Disc Material Size A B C I.D. O.D. B.C. Holes Black White

Wet-R-Dri Valve A TA STYLE LIGHTWEIGHT COMPACT VERSATILE B I.D. Size Standard Model Detent Model Standard Material Max. Working Body Disc Pressure WD00 AL B. WD0 AL B. Aluminum WD00 GI B. WD0 GI B. Grey

Standards are finally approved by the Standards High Council of Iranian Ministry of Petroleum.

FOREWORD This Standard is intended to be used within and for Iranian Ministry of Petroleum (N.I.O.C, N.I.G.C, N.P.C., N.I.O.R.D.C. and other affiliate organizations and companies) and has been prepared

ADDENDUM NO. 1. Mallory Valley Utility District Technical Specifications & Design Criteria for Water Supply & Distribution Facilities

ADDENDUM NO. TO Mallory Valley Utility District Technical Specifications & Design Criteria for Water Supply & Distribution Facilities Date of Addendum: December, 00 Hethcoat & Davis, Inc. 78 Franklin Road,

Alloy 20 29Ni-20.5Cr-3.5Cu-2.5Mo A351 CN7M J Mo 20Cr-18Ni-6.5Mo-N-Cu A351 CK3MCuN J93254

The typical Austentic Stainless Steel 18%Cr + 10% Ni have been adopted in corrosion resistant application for decades. In accordance with more and more application, the typical Austentic stainless steel

Process Inline Filter, Change-Over

Process Inline Filter, Change-Over -503-130x -520x 1. TECHNICAL SPECIFICATIONS 1.1 GENERAL Inline filters, types PRFL and duplex inline filters are designed for process engineering and chemical plants.

SECTION FACILITY STORM DRAINAGE

PART 1 - GENERAL 1.1 DESCRIPTION SECTION 22 14 00 Storm drainage systems, including piping and all necessary accessories as designated in this section. 1.2 RELATED WORK A. Penetrations in rated enclosures:

ASME VALVE BODY MATERIAL TYPES/EQUIVALENTS & PRESSURE/TEMPERATURE RATINGS

VALVE BODY MATERIAL TYPES/EQUIVALENTS & PRESSURE/TEMPERATURE RATINGS Menu Valve Shell ASTM Specifications Pages 2 to 7 Pressure- Temperature Ratings Pages 8 to 11 Page 1 9-15 Boolcunda Avenue Salisbury

SECTION VALVES, HANGERS, AND SPECIALTIES

SECTION 15515 VALVES, HANGERS, AND SPECIALTIES PART 1 GENERAL 1.01 SUMMARY A. Related Sections: 1. 15090 - Supports, Anchors, and Seals. 2. 15410 - Piping (Plumbing). 3. 15510 - Piping (HVAC). 4. 15540

Electronic Master - Printed Copies Uncontrolled - Rosemount Proprietary

Rosemount DP Flow Design & Operations 5601 North 71 st Street Boulder, CO 80301 Tel (303) 530-9600 Fax (303) 530-7064 Technical Documentation for CE Marking Pressure Accessories Manufacturer: Rosemount

PROJECT TITLE PROJECT NO: CONTRACT TITLE GRANT NO: UNIVERSITY OF CALIFORNIA, DAVIS CITY, CALIFORNIA

The following standard specification is intended to be edited according to the specifics of the project. Brackets [ ] and areas shaded in gray [e.g. format] indicate requirements that are optional depending

FPD190 Differential pressure restriction orifice plates

Data sheet DS/FPD190 EN FPD190 Differential pressure restriction orifice plates Limits the flowrate or reduces the pressure of liquids, gases and steam Measurement made easy Orifice plate for flow restriction

Worcester Controls 44/ Piece Reduced Ball Valves

Worcester Controls 44/459 3 -Piece Reduced Ball Valves Almost 40 years ago, Flowserve Worcester Controls original 3-piece valve was responsible for the development of the UK ball valve market. The Series

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service 1

Designation: A 420/A 420M 07 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service This standard is issued under the fixed designation A 420/A 420M;

Established DOC. NO : SSI / PROFILE Rev-03

Established 2002 www.sandskuwait.com C O M P A N Y P R O F I L E DOC. NO : SSI / PROFILE-001 - Rev-03 2 S & S International Company W.L.L. was Incorporated in 2009 with the primary objective of becoming

AVK NEDERLAND INDUSTRIAL VALVES & FITTINGS MAKING A DIFFERENCE INDUSTRIAL 1

AVK NEDERLAND INDUSTRIAL MAKING A DIFFERENCE INDUSTRIAL 1 AVK NEDERLAND INDUSTRIAL AVK Group The AVK Group is a privately owned industrial group that currently comprises 90 companies. AVK s core business

MANUFACTURER, IMPORTER AND DISTRIBUTOR FASTENERS, COMPONENTS AND SEALING DEVICES

MANUFACTURER, IMPORTER AND DISTRIBUTOR FASTENERS, COMPONENTS AND SEALING DEVICES Competitive Advantage Product Overview Manufacturing and Services People Diversity People. Leadership. Service. Westermann

Metallum Piping Components

Metallum Piping Components Storage: 100 000 indoor square meters +/- 65 000 tons of pipes, fittings and flanges Products Pipes, flanges and fittings Carbon, Stainless and alloy steels X52, X65 Type of