CERTIFIED REFERENCE MATERIALS (CRM)
|
|
- Anissa Newman
- 6 years ago
- Views:
Transcription
1 CERTIFIED REFERENCE MATERIALS (CRM) Sufficiently Homogenized Indian Reference Materials certified by Round robin analysis for the use of validation of methods and calibration. CSIR-National Metallurgical Laboratory Jamshedpur
2 METALS / ALLOYS CRM No. : 13.3, STEEL 0.11% C (TURNING FORM) Carbon (C) 0.12 % Silicon (Si) 0.06 % Phosphorus (P) 0.02 % Manganese (Mn) 0.45 % CRM No. : EN-8, STEEL 0.42% C (TURNING FORM) Carbon (C) 0.42 % Silicon (Si) 0.21 % Manganese (Mn) 0.82 % Phosphorus (P) 0.02 % Sulphur (S) 0.02 % CRM No. : 20.02, STEEL 1.0% C (TURNING FORM) Carbon (C) 1.16 % Silicon (Si) 0.05 % Sulphur (S) 0.02 % Phosphorus (P) 0.08 % Manganese (Mn) 0.55 % CRM No. : 223.6, LOW ALLOY STEEL (TURNING FORM) Carbon (C) 0.20 % Silicon (Si) 0.30 % Manganese (Mn) 0.64 % Sulphur (S) 0.03 % Phosphorus (P) 0.04 % Nickel (Ni) 0.97 % Chromium (Cr) 0.86 % Molybdenum (Mo) 0.17 % Copper (Cu) 0.14 % Aluminum (Al) 0.04 % Cobalt (Co) 0.01 % CRM No. : 220, STAINLESS STEEL (TURNING FORM) Carbon (C) 0.08 % Silicon (Si) 0.56 % Manganese (Mn) 1.35 % Phosphorus (P) 0.03 % Copper (Cu) 0.12 % Cobalt (Co) 0.16 % Nickel (Ni) 8.70 % Chromium (Cr) % CRM No. : 21.2, NICKEL STEEL (TURNING FORM) Carbon (C) 0.15 % Silicon (Si) 0.28 % Sulphur (S) 0.04 % Phosphorus (P) 0.05 % Manganese (Mn) 0.51 % Nickel (Ni) 3.04 % Chromium (Cr) 0.83 % CRM No. : 35.1, FERRO-VANADIUM (POWDER FORM) Vanadium (V) % CRM No. : 34.1, FERRO-TITANIUM (POWDER FORM) Silicon (Si) 2.55 % Titanium (Ti) % Aluminum (Al) 5.54 % CRM No. : 33.1, L.C. Fe-MANGANESE (POWDER FORM) Carbon (C) 0.12 % Silicon (Si) 1.74 % Phosphorus (P) 0.13 % Manganese (Mn) %
3 METALS / ALLOYS CRM No. : 33.2, H.C. Fe-MANGANESE (POWDER FORM) Carbon (C) 6.82 % Silicon (Si) 1.14 % Phosphorus (P) 0.19 % Manganese (Mn) % CRM No. : 31.3, FERRO-SILICON (POWDER FORM) Silicon (Si) % Aluminium (Al) 1.48 % Manganese (Mn) 0.16 % Calcium (Ca) 0.62 % Phosphorus (P) 0.03 % CRM No. : 1.8A, CAST IRON (POWDER FORM) Total Carbon (C) 3.06 % Silicon (Si) 2.67 % Sulphur (S) 0.11 % Phosphorus (P) 0.05 % Manganese (Mn) 0.43 % CRM No. : 7.3, ALLOY CAST IRON (POWDER FORM) Total Carbon (C) 3.07 % Graphitic Carbon 2.55 % Combined Carbon 0.52 % Silicon (Si) 1.21 % Phosphorous (P) 0.22 % Manganese (Mn) 0.82 % Chromium (Cr) 0.38 % Nickel (Ni) 1.89 % Copper (Cu) 0.03 % CRM No. : 51.1, 6% Si-Al ALLOYS (TURNING FORM) Silicon (Si) 6.15 % Manganese (Mn) 0.20 % Copper (Cu) 0.30 % Iron (Fe) 0.79 % CRM No. : 42.1, BRASS 70:30 (TURNING FORM) Copper (Cu) % Zinc (Zn) % Iron (Fe) 0.07 % CRM No. : 41.2, BRASS 60:40 (TURNING FORM) Copper (Cu) % Lead (Pb) 2.56 % Zinc (Zn) % Iron (Fe) 0.09 % Tin (Sn) 0.12 %
4 RAW MATERIALS CRM No. : 161.4, IRON ORE (POWDER FORM) Total Iron (Fe T) % Silica (SiO 2) % Alumina (Al2O 3) % Calcium Oxide (CaO) 0.41 % Magnesium Oxide (MgO) 0.24 % Sulphur (S) % Phosphorus (P) % Titanium Oxide (TiO 2) 0.50 % CRM No. : 161.5, IRON ORE (POWDER FORM) Total Iron (Fe T) % Silica (SiO 2) 7.13 % Alumina (Al2O 3) 7.53 % Sulphur (S) % Phosphorus (P) 0.07 % Titanium Oxide (TiO 2) 0.29 % CRM No. : 161.6, IRON ORE (POWDER FORM) Total Iron (Fe T) % Silica (SiO 2) 2.37 % Alumina (Al2O 3) 2.85 % Sulphur (S) % Phosphorus (P) % Titanium Oxide (TiO 2) 0.10 % CRM No. : 61.3 C, IRON ORE (POWDER FORM) Total Iron (Fe T) % Silica (SiO ) Alumina (Al O ) 3.11 % 2 3 Manganese (Mn) % Sulphur (S) % Phosphorus (P) % % CRM No. : 71.1, LIME-STONE (POWDER FORM) Silica (SiO ) 0.52 % 2 Calcium Oxide (CaO) % Magnesium Oxide (MgO) 0.50 % Loss on Ignition (LOI) % CRM No. : 166.3, MANGANESE ORE (POWDER FORM) Total Manganese (Mn T) % Silica (SiO 2) 8.79 % Alumina (Al2O 3) 4.99 % Iron [Fe (T)] % Phosphorus (P) % Potassium Oxide (K2O) 0.22 % CRM No. : 166.4, MANGANESE ORE (POWDER FORM) Total Manganese (Mn T) % Silica (SiO 2) 2.85 % Alumina (Al2O 3) 3.55 % Iron [Fe (T)] % Phosphorus (P) 0.13 % Potassium Oxide (K2O) 1.19 % Sodium Oxide (Na2O) 0.07 %
5 SPECTROGRAPHIC STANDARDS CRM No. : PC-1, PLAIN CARBON STEEL (DISC FORM) Carbon (C) 0.03 % Silicon (Si) 0.03 % Manganese (Mn) 0.26 % Phosphorus (P) 0.01 % Chromium (Cr) 0.03 % CRM No. : 304, PLAIN CARBON STEEL (DISC FORM) Carbon (C) 0.19 % Silicon (Si) 0.08 % Manganese (Mn) 0.29 % Phosphorus (P) 0.09 % Sulphur (S) 0.03 % Nickel (Ni) 0.01 % Price : Rs ( for each piece) CRM No. : PC-4, PLAIN CARBON STEEL (DISC FORM) Carbon (C) 0.43 % Silicon (Si) 0.34 % Manganese (Mn) 0.80 % Phosphorus (P) 0.04 % Sulphur (S) 0.05 % Chromium (Cr) 0.26 % CRM No. : BND , PLAIN CARBON STEEL (DISC FORM) Carbon (C) 0.57 % Silicon (Si) 0.19 % Sulphur (S) 0.05 % Phosphorous (P) 0.04 % Manganese (Mn) 0.80 % Nickel (Ni) 0.03 % Chromium (Cr) 0.08 % CRM No. : PC-5, PLAIN CARBON STEEL (DISC FORM) Carbon (C) 1.03 % Silicon (Si) 0.22 % Manganese (Mn) 0.52 % Phosphorous (P) 0.07 % Sulphur (S) 0.07 % Chromium (Cr) 1.19 % PROCESS PRODUCT CRM No. : 435.1, BLAST FURNACE SLAG (POWDER FORM) Silica (SiO 2) % Alumina (Al2O 3) % Calcium Oxide (CaO) % Magnesium Oxide (MgO) 7.77 % Total Iron (Fe T) 0.36 % Ferrous Oxide (FeO) 0.43 % Sulphur (S) 0.91 % Phosphorous (P) 0.01 % Titanium Oxide (TiO 2) 0.92 %
6 Bulk Order Promotional Offer 1. On bulk purchase of 15 bottles (100g each) 2 bottles any of 100g may be given free. 2. On bulk purchase of 30 bottles (100g each) 6 bottles any of 100g may be given free. 3. On bulk purchase of 150 bottles (100g each) 35 bottles any of 100g may be given free. Ordering Information : Note : Bulk Order Promotional Offer is not applicable for spectrographic standards. Additional *@18 % GST is applicable on the listed price. The CRMs will be sent through REGISTERED POST PARCEL/COURIER on receipt of full payment in advance. All payments are to be made in favour of "Director National Metallurgical Laboratory, Jamshedpur" by e-payment (NEFT/RTGS) or Demand Draft payable at State Bank of India Jamshedpur. No cash will be accepted. The bank details are given below : Bank Detail : Banker's detail : State Bank of India, NML Branch Jamshedpur , Jharkhand, India Electronic A/c No. : RTGS No : SBIN MICR No. : PAN No. : AAA TC 2716R *GST No. : 20AAATC2716R2ZS HSN/SAC Code : Contact Details : Dr. A. K. Upadhyay, Analytical Chemistry Group, MER Division, CSIR-National Metallurgical Laboratory, Jamshedpur Phones: / Fax: aku@nmlindia.org Website: CSIR-National Metallurgical Laboratory Phone : /001, STD Code : 0657 Fax : , director@nmlindia.org Website :
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
More informationIssue February 2017 Valid to December ISO 9001 Registered Quality Management
Issue February 2017 Valid to December 2017 ISO 9001 Registered Quality Management 015 Index December 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 43
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Metals and Minerals Division 2 Perry Road Witham Essex CM8 3TU Contact: Mrs C Hargreaves Tel: +44 (0)1376 536800 Fax: +44 (0)1376 520819 E-Mail:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationAnalysis of Cast Iron Using Shimadzu PDA-7000
Analysis of Cast Iron Using Shimadzu PDA-7000 C112-0510M The analysis of low and high alloy cast iron by optical emission spectrometry is presented. Cast iron alloys are classified by their mechanical
More informationSpecification ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH All.steel f.quen.a.temp, h.str.
Class: Heat-treatable steel Specification 16-09 ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH Class No.:11 JED 723 Previous Edition Abbreviated Title 15-07 All.steel f.quen.a.temp, h.str. 8
More informationOne of the main ores of zinc is zinc blende, ZnS. There are two stages in the extraction of zinc from this ore.
1 Two of the main uses of zinc are for galvanising and for making alloys. One of the main ores of zinc is zinc blende, ZnS. There are two stages in the extraction of zinc from this ore. (a) Stage 1 Zinc
More informationCERTIFICATE OF ANALYSIS REVISED REPORT
Your C.O.C. #: A122303 Attention: STEPHEN LEGAREE EDMONTON 9331 9331-48 Street EDMONTON, AB CANADA T6B 2R4 Report #: R1787645 Version: 2R CERTIFICATE OF ANALYSIS REVISED REPORT MAXXAM JOB #: B4B4991 Received:
More informationGENARAL INTRODUCTION TO METALLURGY :Std: XI-CHEMISTRY
GENARAL INTRODUCTION TO METALLURGY :Std: XI-CHEMISTRY 1. What is matrix? The ore is generally associated with rock impurities like clay, sand etc. called gangue or matrix 2. What is mineral? The natural
More informationMaterials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Manufacturing Info * : Required Field Supplier Information Company Name * STMicroelectronics
More informationBy-Products from EAF Dust Recycling and Their Valorisation. Vlad POPOVICI
By-Products from EAF Dust Recycling and Their Valorisation Bredero Shaw, Canada 5 th Global Slag Conference, Brussels, 23-24 November 2009 Agenda Electric Arc Furnace Dust Global Production EAF Dust Recycling
More informationAAS - Atomic Absorption Mono Element ppm Standard Solutions (Spectro ECON)
CL01.0105 CL01.0106 CL01.0107 CL01.0126 CL01.0127 CL01.0135 CL01.0136 CL01.0137 CL01.0138 CL01.0205 CL01.0206 CL01.0207 CL01.0216 Aluminium standard solution (Spectro ECON) 8.948 g AlCl3.6H2O / l H2O Solution
More informationEAF burdening How can EAF burdening best utilise DRI? Rutger Gyllenram Kobolde & Partners
EAF burdening How can EAF burdening best utilise DRI? Rutger Gyllenram Kobolde & Partners www.kobolde.com Disclaimer Examples given in this presentation are just examples, given in order to illustrate
More informationChina NIL Research Center for Proficiency Testing. China NIL Proficiency Testing Schemes (2018)
China Research Center for Proficiency Testing China Proficiency Testing chemes () China Research Center for Proficiency Testing takes great pleasure in informing you that we provide some international
More informationNomenclature. A systematic method of writing chemical formulas and naming compounds
Nomenclature A systematic method of writing chemical formulas and naming compounds Chemical symbols Symbols are used to represent elements Either one capital letter, or a capital letter with a lower case
More informationNew GCSE 4462/02 SCIENCE A HIGHER TIER CHEMISTRY 1
Surname Other Names Centre Number 0 Candidate Number New GCSE 4462/02 SCIENCE A HIGHER TIER CHEMISTRY 1 ADDITIONAL MATERIALS A.M. WEDNESDAY, 18 January 2012 1 hour In addition to this paper you may require
More informationExtracting and using metals. ores. native. Only the most unreactive metals such as gold and platinum are found as native metals.
Extracting and using metals Only the most unreactive metals such as gold and platinum are found as native metals. ores All the other metals we use are extracted from their ores by chemical processes. native
More information5072 CHEMISTRY (NEW PAPERS WITH SPA) TOPIC 9: METALS 5067 CHEMISTRY (NEW PAPERS WITH PRACTICAL EXAM) TOPIC 9: METALS
5072 CHEMISTRY (NEW PAPERS WITH SPA) TOPIC 9: METALS 5067 CHEMISTRY (NEW PAPERS WITH PRACTICAL EXAM) TOPIC 9: METALS SUB-TOPIC 9.3 TO 5 EXTRACTION OF METALS; RECYLING OF METALS; IRON LEARNING OUTCOMES
More informationStandardisation in the field of ferro alloys
Standardisation in the field of ferro alloys P. Dakshinamurthr ABSTRACT Indian Standards Institution has set up a separate Sectional Committee known as Ferro Alloys Sectional Committee, SMDC 8 in late
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationCERTIFICATE OF ANALYSIS
Your Project #: 001\DRINKABLE WATER Your C.O.C. #: na Attention: Michael Bourgon 7111 Syntex Dr Suite 354 Mississauga, ON CANADA L5B 4P5 CERTIFICATE OF ANALYSIS MAXXAM JOB #: B2H1428 Received: 2012/11/01,
More informationCore Analysis with the Tracer
BRUKER ELEMENTAL Core Analysis with the Tracer Prepared by: Lee Drake, Senior Application Scientist January 23, 2014 BRUKER ELEMENTAL Key Points OBJECTIVE 3 EXPLORATION 3 DECISION MAKING 3 RECLAMATION
More informationThe IIMA Value-in-Use Model. For Evaluation screening of OBM Materials. Version 3.0. Operating Manual. May 29, 2017
The IIMA Value-in-Use Model For Evaluation screening of OBM Materials Version 3.0 Operating Manual May 29, 2017 Introduction The IIMA Value-in-use model is meant to provide users of OBMs with a simple
More informationPSection P. Sec. P Page 1
PSection P CHEMICAL ANALYSES OF STANDARD SIZES STANDARD METALS AND DESIGNATION SYSTEMS... 2 EFFECTS OF COMMON ALLOYING ELEMENTS IN STEEL....... 3-4 DESIGNATION OF CARBON STEELS........................
More informationDr. Joseph J Poveromo, Raw Materials & Ironmaking Global Consulting DR Pellet Quality & MENA Applications
Dr. Joseph J Poveromo, Raw Materials & Ironmaking Global Consulting joe.poveromo@rawmaterialsiron.com DR Pellet Quality & MENA Applications Chemistry Considerations direct reduction processes: chemical
More informationMetal Reference Materials - SOLID
2013 2014 Metal Reference Materials - SOLID Iron Copper Nickel Cadmium Cobalt Lead Magnesium Molybdenum Noble metals Tin Titanium Zinc SUS - Setting up Samples Fluxana is dedicated to serve and support
More informationThe unofficial TRITON METHOD for dummies guide
The unofficial TRITON METHOD for dummies guide The unofficial TRITON METHOD for dummies guide is not affiliated with TRITON GmbH. This guide has been written by hobbyists with the aim of simplifying the
More informationSEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components
SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components Technology Transfer 91060574B-STD and the logo are registered service marks of, Inc. 1996, Inc. SEMASPEC Test Method
More informationHigh-Purity Acids & Reagents
J.T.Baker Brand High-Purity Acids & Reagents Purity and consistency are essential for all reagent chemicals, particularly acids. Whether used for tracemetal analysis or for general use, aligning the correct
More informationMaterial Evaporation Application Comment MP P / Optical films, Oxide films, Electrical contacts. Doping, Electrical contacts.
for vapour Aluminum (Al) -, Optical, Oxide, Electrical BN liners with lid are recommended due to the reactivity and the fact that Al creeps out. Cooling down of the cell with 1K per minute. 660 972 Antimony
More informationcalcium oxide removes acidic oxides basic oxides acidic oxides basic oxides Iron obtained from the blast furnace is contaminated with
1 Iron from a blast furnace is treated with and with calcium oxide to make steel. Which substances in the are removed? removes calcium oxide removes acidic oxides basic oxides acidic oxides basic oxides
More informationX-ray Fluorescence Spectrometry X-ray Fluorescence Spectrometry (XRF) is a non-destructive, quantitative technique for determining chemical
X-ray Fluorescence Spectrometry X-ray Fluorescence Spectrometry (XRF) is a non-destructive, quantitative technique for determining chemical composition. When a primary x-ray collides with an atom in the
More informationXRF DRIFT MONITORS DATA CALIBRATION MATERIAL
UNIQUE PRODUCTS FROM ONE SOURCE XRF DRIFT MONITORS DATA CALIBRATION MATERIAL KEY FEATURES Monitor Composition The monitors are manufactured as stable fortified glass discs that are used to correct for
More informationSILLIKER, Inc. Southern California Laboratory 6360 Gateway Drive, Cypress, CA Tel. 209/ Fax. 714/
6360 Gateway Drive, 90630 95073 Page 1 of 8 CI-516 Cistanche 361439388 ICP MS Full Mineral Screen EPA 3050/6020 USP730 BRN Aluminum 2.2 ppm (w/w) Antimony Arsenic 0.06 ppm (w/w) Barium 0.09 ppm (w/w) Beryllium
More informationPROFICIENCY TESTING PROGRAMS SOILS & INPUTS
PROFICIENCY TESTING PROGRAMS SOILS & INPUTS A15 15a 24 A38a A38b 45 Soils Fresh soils Mineral fertilizers Activated sludge, sediments, Soil: Physico-chemistry Activated sludge, sediments, Soil: Micropollutants
More informationANALYTICAL REFERENCE MATERIALS INTERNATIONAL Part of LGC Standards 3 Perimeter Road, Unit 9 Manchester, NH USA
ANALYTICAL REFERENCE MATERIALS INTERNATIONAL Part of LGC Standards 3 Perimeter Road, Unit 9 Manchester, NH 03103 USA Tel: (603) 935-4100 E-mail: Sales@ARMI.com FAX: (603) 935-4101 (800) 421-9454 Web: www.armi.com
More informationChapter 1.6. Polished Single-Crystal Silicon, Prime Wafers (all numbers nominal) Wafer Specification Table. Diameter 100 mm 4-inch 150 mm 6-inch
Chapter 1.6 I - Substrate Specifications Polished Single-Crystal Silicon, Prime Wafers (all numbers nominal) Wafer Specification Table Diameter 100 mm 4-inch 150 mm 6-inch Thickness 525 µm 20.5 mils 675
More informationThis method is applicable to the following parameters: Nitric Hydrochloric acid digestion, Instrumental analysis.
Metals Revision Date: Nov 6, 2015 1.2.1 Strong Acid Leachable Metals () in Soil - Prescriptive s List & EMS Codes Analytical Method Introduction Method Summary Metals in Soil and Sediment. This method
More informationA.M. MONDAY, 18 January minutes
Candidate Name Centre Number Candidate Number 0 GCSE 240/01 ADDITIONAL SCIENCE FOUNDATION TIER CHEMISTRY 2 A.M. MONDAY, 18 January 2010 45 minutes ADDITIONAL MATERIALS In addition to this paper you may
More informationATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of
A2LA has accredited Brackenridge, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005
More informationALUMINUM CASTINGS 300 SERIES (Without Beryllium)
203 American Foundry Society Meets the Requirements of OSHA Standard 29 CFR 90.200 Hazard Communication and EPA Supplier Notification Requirements under Section 33 of the Emergency Planning and Community
More informationBLACK STURGEON LAKES WATER QUALITY MONITORING
BLACK STURGEON LAKES WATER QUALITY MONITORING 2017 REPORT Prepared by: Ryan Haines, B.Sc. Biologist and Project Management Kenora Resource Consultants Inc. Site 155, Compartment 14, RR #1 Kenora, ON P9N
More informationTypes of Metal Alloys
Types of Metal Alloys Metal alloys Ferrous Nonferrous Steels Cast iron 257 Uses low carbon
More informationMonitoring, Detection and Identification of Metallic Contaminationn in a Production
Monitoring, Detection and Identification of Metallic Contaminationn in a Production Enviro onment Philippe Maillot R&D Metrology STMicroelectronics Rousset philippe.maillot@st.com 2 Outline Context and
More information2016 New Revision HIGH PERFORMANCE TAPS
2016 New Revision HIGH PERFORMANCE TAPS Greenfield Industries is excited to announce the addition of high performance taps to the Cleveland brand. All taps in the Cleveland line are designed to machine
More informationXRF S ROLE IN THE PRODUCTION OF MAGNESIUM METAL BY THE MAGNETHERMIC METHOD
Copyright(c)JCPDS-International Centre for Diffraction Data 2001,Advances in X-ray Analysis,Vol.44 398 XRF S ROLE IN THE PRODUCTION OF MAGNESIUM METAL BY THE MAGNETHERMIC METHOD H. L. Baker Northwest Alloys,
More informationRE-REFINED ENGINE OIL BOTTOMS (REOB) & POLYPHOSPHORIC ACID (PPA) IN HOT MIX. 89 th Annual Transportation Short Course
RE-REFINED ENGINE OIL BOTTOMS (REOB) & POLYPHOSPHORIC ACID (PPA) IN HOT MIX 89 th Annual Transportation Short Course Table of Contents 1 What is REOB and PPA? 3-4 2 Problems with Using REOB and PPA 5-6
More informationMETALLIC MATERIALS SPECIFICATION HANDBOOK
METALLIC MATERIALS SPECIFICATION HANDBOOK METALLIC MATERIALS SPECIFICATION HANDBOOK FOURTH EDITION Robert B. Ross Ross Materials Technology Ltd, East Kilbride, Glasgow Volume I SPRINGER-SCIENCE+BUSINESS
More informationDiscipline Chemical Testing Issue Date Certificate Number T-3553 Valid Until Last Amended on - Page 1 of 9
Last Amended on - Page 1 of 9 I. ORES & MINERALS 1. Iron Ore Total Iron IS 1493: 1981 (RA 2006) 10 % to 70 % Silicon IS 1493: 1981 (RA 2006) 0.5 % to 25 % Aluminum IS 1493: 1981 (RA 2006) 0.5 % to 20 %
More informationA Study on Mechanical Properties of Aluminium LM25- Si c Composites Fabricated Using Stir Casting Technique
A Study on Mechanical Properties of Aluminium LM25- Si c Composites Fabricated Using Stir Casting Technique.Satyanarayen 1, Dominic Roystan 2, M.Shreesaravanan 3 Balaguru 4, C.Devanathan 5 1,2,3,4 UG Students,
More informationProperties A Metal B Non- metal Electronic configuration?? Nature of oxides?? Oxidizing or reducing action?? Conduction of heat and electricity??
CLASS: X NCERT (CBSE) SCIENCE: Chemistry Page: 1 Question 1: Compare the properties of a typical metal and a non-metal on the basis of the following. Fill in Column A, B. Properties A Metal B Non- metal
More informationEffect of Charge Materials on Slag Formation in Ductile Iron Melts
Effect of Charge Materials on Slag Formation in Ductile Iron Melts C. Labrecque, M. Gagné and E. Planque Rio Tinto Iron & Titanium Inc. Sorel-Tracy, Quebec, Canada ABSTRACT The formation of an oxide slag
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 19 Wildmere Road Banbury Oxfordshire OX16 3JU Contact: Mr J Guntrip Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail: qualityuk@wmtr.com
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom
More informationPrecision feeler gage, calibrated shim steel and Specialty Spring Steels
Precision feeler gage, calibrated shim steel and Specialty Spring Steels 2011 Your partner for precision steels We offer an extensive range of precision feeler gages and shim steel which covers most product
More informationA.M. MONDAY, 18 January minutes
Candidate Name Centre Number Candidate Number 0 GCSE 240/02 ADDITIONAL SCIENCE IGER TIER CEMISTRY 2 A.M. MONDAY, 18 January 2010 45 minutes ADDITIONAL MATERIALS In addition to this paper you may require
More informationACCEPTANCE OF METALLIC MATERIALS USED FOR PRODUCTS IN CONTACT WITH DRINKING WATER
ACCEPTANCE OF METALLIC MATERIALS USED FOR PRODUCTS IN CONTACT WITH DRINKING WATER 4MS Common Approach Part A Procedure for the acceptance Part B 4MS Common Composition List Adopted by the 4MS Joint Management
More informationAppendix C1: Batch Kinetics Tests
Appendix C1: Batch Kinetics Tests This appendix contains the entire data set for the batch kinetics tests for the potential biofilter components. These tests were performed to provide estimates of optimal
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Schedule of ccreditation United Kingdom ccreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom Contact:
More informationOUTSIDE-SOURCE REFERENCE MATERIALS
OUTSIDE-SOURCE REFERENCE MATERIALS Page ACIRS: Australian Coal Industry Reference Samples, Australia... 53 ALCAN: Alcan International Ltd., Canada... 3 BAM: Bundesanstalt für Materialforschung und -prüfung,
More informationCorrosion Studies on GeoBrom HG520
Corrosion Studies on GeoBrom HG520 Partial Immersion Study a Chemtura business Great Lakes Solutions: brominated derivative products for mercury control Contents Background Information 1 Objectives 1 Executive
More informationCorrosion Studies on GeoBrom HG520
Corrosion Studies on GeoBrom HG520 Vapor Space Study a Chemtura business Great Lakes Solutions: brominated derivative products for mercury control Contents Background Information 1 Objectives 1 Executive
More informationBy THE STAFF OF NML fr VISL, Presented by SHRI D. D. AKERKAR" ABSTRACT
Development of the process for production of vanadium rich slag and low silicon pig iron from vanadium bearing titaniferous magnetites of Masanikere at VISL, Bhadravati By THE STAFF OF NML fr VISL, Presented
More informationCertificate of Analysis
Brammer Standard Company, Inc. Certificate of Analysis B.S. 8A Reference Material for High Manganese Stainless Steel (Nitronic 60) Certified Estimate of Certified Estimate of Value Uncertainty Value Uncertainty
More informationTopic 2.7 EXTRACTION OF METALS. Extraction of Iron Extraction of Aluminium Extraction of Titanium Recycling
Topic 2.7 EXTRACTION OF METALS Extraction of Iron Extraction of Aluminium Extraction of Titanium Recycling EXTRACTING METALS FROM THEIR ORES Most metals do not occur native. They exist in compounds, usually
More informationAM metal powders from LPW. Comprehensive range of metal powders optimised for use on all AM machines. 24 hours from order to dispatch
AM metal powders from LPW Comprehensive range of metal powders optimised for use on all AM machines 24 hours from order to dispatch LPW certified to AS9120, AS9100, ISO9001, ISO13485 AM metal powders from
More informationEFFECT OF CHROME ORE QUALITY ON FERROCHROME PRODUCTION EFFICIENCY
EFFECT OF CHROME ORE QUALITY ON FERROCHROME PRODUCTION EFFICIENCY M.H. Farjadi and J. Azari Faryab Mining Company, 54 Sohrevardi Ave. Tehran, Iran. E-mail: farjadi@faryab-mining.com and j.azari@faryab-mining.com
More informationCorrosion Studies on GeoBrom HG520
Corrosion Studies on GeoBrom HG520 Total Immersion Study a Chemtura business Great Lakes Solutions: brominated derivative products for mercury control Contents Background Information 1 Objectives 1 Executive
More informationDiscover the variety of Metal Powders
Discover the variety of Metal Powders The range of our standard metal powder Non Ferrous, Tool Steel, Stainless Steel and Light Alloys SLM The Industrial Manufacturing Revolution PIONEERS in metal-based
More informationLight Bases & Light Fixtures
Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts
More informationContract hardening. Leading Manufacturers of Melting, Thermal Processing & Production Systems for the Metals & Materials Industry Worldwide
Contract hardening Leading Manufacturers of Melting, Thermal Processing & Production Systems for the Metals & Materials Industry Worldwide The company Hardening quality tested and documented INDUCTOHEAT
More information1-Materials Science & Materials Engineering
1-Materials Science & Materials Engineering 1-1-Structure & Properties Relationship (Materials Science or Materials Engineering) Processing Structure Properties Performance Sub Atomic Atomic Sub Atomic
More informationMachinability is the ease with which a given material may be worked with a cutting tool
Machinability Machinability is the ease with which a given material may be worked with a cutting tool Machinability ratings (MR) provide and understanding of the severity of a metalworking operation in
More informationfor production of 2-[ F]-fluoro-2-deoxy-D-glucose with the
Reagents Kit 18 for production of 2-[ F]-fluoro-2-deoxy-D-glucose with the GE TRACERlab MX FDG Module Catalog No.: RK-100 Date of Manufacturing: Sep.16 2008 Lot No.: RK-100-080916 Expiry Date: Sep.15 2009
More informationStrong Acid Leachable Metals (SALM) in Soil - Prescriptive
Strong Acid Leachable Metals () in Soil - Prescriptive Metals Revision Date: Sept 15, 2017 Parameter Analytical Method Introduction Method Summary MDL(s) and EMS Analyte Code(s)* Metals in Soil and Sediment.
More informationKKB Micro Testing Labs Pvt. Ltd., , 2 nd Floor, Tarun Plaza, NFC Main Road, Krishna Nagar Colony, Moula Ali, Hyderabad, Telangana
Last Amended on - Page 1 of 7 I. AIR, GASES & ATMOSPHERE 1. Ambient Air Monitoring RSPM ( PM 10) IS 5182 (Part 23): 2006 (RA ) 5 µg/m 3 to 750 µg/m 3 PM 2.5 SOP 11 dated 17.11.2014 12.5 µg/m 3 to 500 µg/m
More informationLocked Cycle Leaching Test and Yellowcake Precipitation
Locked Cycle Leaching Test and Yellowcake Precipitation In 2013, the Saskatchewan Research Council ( SRC ) in Saskatoon, SK, Canada commenced locked cycle alkaline leach testing on drill core samples from
More informationComplexity (Reactions & Phase Changes) in Blast
Complexity (Reactions & Phase Changes) in Blast Furnace ASHOK K, Scientist, CSIR-NML, Jamshedpur - India 2 ½ hours General Facts about BF Solid particles / burden descends down. Gases / reducing gas mixture
More informationIntroduction to Metallurgy
Metallurgy Introduction to Metallurgy Metallurgy deals with extraction and purification of metals from their sources. Very few metals like gold, silver etc. occur in native state, while most other metals
More informationNEW EAF DUST TREATMENT PROCESS : ESRF MICHIO NAKAYAMA *
NEW EAF DUST TREATMENT PROCESS : ESRF BY MICHIO NAKAYAMA * SYNOPSYS: Electric arc furnaces (EAF) generate much dust during operation, which contains very high percentages of zinc, lead, and iron, as well
More information7.3 Bonding in Metals > Chapter 7 Ionic and Metallic Bonding. 7.3 Bonding in Metals. 7.1 Ions 7.2 Ionic Bonds and Ionic Compounds
Chapter 7 Ionic and Metallic Bonding 7.1 Ions 7.2 Ionic Bonds and Ionic Compounds 7.3 Bonding in Metals 1 Copyright Pearson Education, Inc., or its affiliates. All Rights Reserved. CHEMISTRY & YOU What
More informationMaterials engineering. Iron and steel making
Materials engineering Iron and steel making Metals: rarely exist in pure state mostly in ores Ore: Metallic and other compounds, mostly oxides Metallic content: Iron ores: 30-70% Fe Copper ores: 0.1-0.8
More informationVŠB - Technical University of Ostrava Faculty of Metallurgy and Materials Engineering
VŠB - Technical University of Ostrava Faculty of Metallurgy and Materials Engineering Steel Casting Foundry (study supports) doc. Ing. Libor Čamek, Ph.D. Ostrava 2016 1. Basic parameters of electric arc
More informationMSE-226 Engineering Materials
MSE-226 Engineering Materials Lecture-7 ALLOY STEELS Tool Steels TYPES of FERROUS ALLOYS FERROUS ALLOYS Plain Carbon Steels Alloy Steels Cast Irons - Low carbon Steel - Medium carbon steel - High carbon
More informationPart 1. Preparation and Color of Solutions. Experiment 1 (2 session lab) Electrons and Solution Color. Pre-lab Report, page 29
Experiment 1 (2 session lab) Electrons and Solution Color Pre-lab Report, page 29 Session 1 One hour discussion (E2) Two hour lab (E1) Aim to complete Parts 1, 2, and 3 of E1. Part 1. Preparation and Color
More information(a) To find out which is the more reactive metal, zinc or tin, the following experiment could be carried out. piece of zinc shiny surface
1 The reactivity series lists metals in order of reactivity. (a) To find out which is the more reactive metal, zinc or tin, the following experiment could be carried out. piece of zinc shiny surface tin(ii)
More informationAn Introduction to Indian Standards on Ferro Alloys
Ferro Alloy Industries in the Liberalised Economy Editors : A, K. Vaish. S.D. Singly, N.G. Gosxvanti and P. Raniachandrarao NML Jamshedpur 831 007, 1997, pp. 14-22 An Introduction to Indian Standards on
More informationDETERMINATION OF ELEMENTS IN DRINKING WATER AS PER BUREAU OF INDIAN STANDARDS 10500, & USING THE AGILENT 5100 ICP-OES
ENVIRONMENTAL ANALYSIS DETERMINATION OF ELEMENTS IN DRINKING WATER AS PER BUREAU OF INDIAN STANDARDS 10500, 14543 & 13428 USING THE AGILENT 5100 ICP-OES Solutions for Your Analytical Business Markets and
More informationMaterial Safety Data Sheet
Modesto Steel Identification P. O. Box 5036, 1424 Emerald Avenue STLS Modesto, CA 95352 Stainless Steel Date Issued: Bar, Sheet, Plate I. INGREDIENTS Material or Component CAS Number % Weight Exposure
More informationThis resource contains three different versions of the periodic table, including a blank one for colouring!
Teaching notes This resource contains three different versions of the periodic table, including a blank one for colouring! It also contains tables of the Group 0, 1 and 7 elements with a few columns for
More informationPozzolanic Activity of Recycled Red Ceramic Bricks
Pozzolanic Activity of Recycled Red Ceramic Bricks Igor S. Pinheiro, Luiz C. Montenegro, and Adriana G. Gumieri School of Engineering; Federal University of Minas Gerais, Rua Espírito Santo, 35, Belo Horizonte,
More informationSAFETY DATA SHEET BW 001 Solid Carbon steel wire electrodes & rods
Not for sale in the USA Ensure that this SDS is received by the appropriate person Section 1. IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND OF THE COMPANY / UNDERTAKING 1.1 Product identifier Trade name
More informationFERRO ALLOY DESIGN, FERRO ALLOY SELECTION AND UTILISATION OPTIMIZATION WITH PARTICULAR FOCUS ON STAINLESS STEEL MATERIALS
FERRO ALLOY DESIGN, FERRO ALLOY SELECTION AND UTILISATION OPTIMIZATION WITH PARTICULAR FOCUS ON STAINLESS STEEL MATERIALS C-J. Rick 1, M. Engholm 1 1 UVÅN HAGFORS TEKNOLOGI AB, Djursholmsvägen 30; 183
More informationSUMMARY Training Steel Quality and Specification
SUMMARY Training Steel Quality and Specification A. FUNCTION AND BENEFIT OF STEEL Steel is considered as national power due to its effect on economy. Steel has backward linkage to raw material sources,
More informationREDUCING REFRACTORY COST USING NEW ASCC BRICKS FOR HOT IRON TRANSPORT
REDUCING REFRACTORY COST USING NEW ASCC BRICKS FOR HOT IRON TRANSPORT PENG, DEJIANG HE, ZHONGYANG YU, TERRY PUYANG REFRACTORY GROUP LTD. Drawings Outline Optimum Design Material Selection: Tar-Impregnated
More informationSTUDIES ON DIRECT REDUCED IRON MELTING IN INDUCTION FURNACE
Trans. Indian Inst. Met. Vol.57, No. 5, October 2004, pp. 467-473 TP 1904 STUDIES ON DIRECT REDUCED IRON MELTING IN INDUCTION FURNACE S.K. Dutta, A.B. Lele and N.K. Pancholi Metallurgical Engg. Deptt.,
More informationAbstract No. 37. Progress in Analytical Chemistry and Material Characterisation in the Steel and Metals Industry Düsseldorf, May 19-21, 2015
Abstract No. 7 Progress in Analytical Chemistry and Material Characterisation in the Steel and Metals Industry Düsseldorf, May 19-1, 015 Combined XRF-XRD analysis for magnetite and Fe determination in
More informationTWEED RIVER HIGH SCHOOL 2006 PRELIMINARY CHEMISTRY. Unit 2 Metals
TWEED RIVER HIGH SCHOOL 2006 PRELIMINARY CHEMISTRY Unit 2 Metals Part 2 Metals differ in their reactivity with other chemicals and this influences their uses. Describe observable changes when metals react
More informationStandards & Specifications
Acme Alloys Products Standards & Specifications Page 1 of 12 Standards & Specifications Like any other technology, engineering and science; material science and metallurgy is an ever-widening field with
More information