Core Compressive Strength / Modulus. Humid Aging of Rigid Cellural Plastics
|
|
- Scott Dalton
- 6 years ago
- Views:
Transcription
1 TestID AAH Fiber Tensile AASHTO T TS-4c ANSI Ceneter Cover Test ANSI Lateral Wall Test ANSI Vertical Wall Test ANSI Z 124 ASTM B117 ASTM C 1147 ASTM C 158 ASTM C 271 ASTM C 272 ASTM C 273 ASTM C 297 ASTM C 365 ASTM C 393 ASTM C 393 4pt ASTM C 581 ASTM D 1002 ASTM D 1062 ASTM D 1621 ASTM D 1622 ASTM D 1623 ASTM D Screw ASTM D Staple ASTM D 1781 ASTM D 1876 ASTM D 2126 ASTM D 2240 ASTM D 2247 ASTM D 2343 ASTM D 2344 ASTM D 2412 ASTM D 2471 ASTM D Method A ASTM D Unnotched, Method E ASTM D 2566 ASTM D 2583 ASTM D 2584 ASTM D 2584 LS ASTM D 2584 WF ASTM D 2734 ASTM D 3039 Description AAH Single Strand Tensile Test Low temp stress resistance 10 Cycle Cover Loading w/ final load cycle 10 Cycle Vertical Center w/ final load cycle Accelerated Aging / Blister Testing (500 hrs) Salt Spray Conditioning Short Term Tensile Strength Strength of Glass by Flexure Density for Sandwich Cores Density of Sandwich Core Materials Core Shear Strength / Modulus Flatwise Tensile Strength Flatwise Compressive Strength Core Shear Properties of Sandwich Constructions by Beam Flexure - 3 Point Core Shear Properties of Sandwich Constructions by Beam Flexure - 4 Point Chemical resistance of resins by Flexure Metal to Metal Adhesive Lap Shear Cleavage Peel Strength Core Compressive Strength / Modulus Density of Plastics Flatwise Tensile Fastener Pull-Out Strength - Screw Fastener Pull-Out Strength - Staple Climbing Drum Peel T-Peel Test Humid Aging of Rigid Cellural Plastics Shore Hardness Water resistance of coatings in 100% Humidity of Glass Fiber Strands Short-Beam Shear Strength Pipe Stiffness Gel Time and Peak Exothermic Temperature Impact Resistance Impact Resistance - Unnotched Linear Shrinkage Barcol Hardness w/ Laminate Schedule w/ Filler Void Content
2 ASTM D PR & Poissons Ratio ASTM D 3043 Structural Panels in Flexure ASTM D 3163 Plastic to Plastic Adhesive Lap Shear ASTM D 3165 Panel to Panel Adhesives Lap Shear ASTM D 3167 Floating Roller Peel Drum ASTM D Method 1 by Resin Digestion (Procedure G) ASTM D Method 2 by Resin Digestion ASTM D 3518 In-Plane Shear Stress-Strain (45 degree Tensile) ASTM D 3528 Double Adhesive Lap Shear Strength ASTM D 3807 Cleavage Peel Strength ASTM D 3846 In-Plane Shear Strength (Notched) ASTM D 4255 In-Plane Shear Strength / Modulus (Rail Shear) ASTM D 4442 Moisture Content Measurement ASTM D 4585 Controlled Condenstaion Conditioning ASTM D 5229 Moisture Absorption ASTM D 5379 Shear Properties (V-Notch) ASTM D 5420 Gardner Drop Impact Test ASTM D 5467 Skin Compression by Beam Flexure ASTM D 5628 Drop Impact Test ASTM D 570 ASTM D 5766 Tensile Strength, Open Hole ASTM D 5868 Strength of Adhesions in Shear ASTM D 5941 Impact: Izod, Charpy ASTM D Point Flexure ASTM D 638 ASTM D Elongation - with Elongation ASTM D PR & Poissons Ratio ASTM D 6641 Compressive Strength / Modulus ASTM D PR ASTM D 6772 ASTM D 695 ASTM D 7078 ASTM D 7136 (analysis) ASTM D 7136 (no analysis) ASTM D 7205 ASTM D 7234 ASTM D point ASTM D point ASTM D 7250 ASTM D 7264 ASTM D 7291 ASTM D 732 ASTM D 790 ASTM D 790-4pt ASTM D Gelcoat Compressive Strength / Modulus & Poissons ratio Dimensional Stability Compressive Strength/Modulus V-Notched Rail Shear Drop Weight Damage Resistance (Full Analysis) Drop Weight Damage Resistance (no Analysis) Pull off Adhesion of Coatings on Concrete Facing properties by Long Beam Flexure - 3 Point Facing properties by Long Beam Flexure - 4 Point Sandwich Beam Flex - 3point Flatwise Tensile Strength - Straight Sided (Strength only) Through-Plane Shear Strength (Punch Shear) Flexural Strength / Modulus - 4 point Evaluation of Gelcoat in Tension
3 ASTM D Gelcoat - 4pt ASTM D 7905 ASTM D 792 ASTM D 953 Boeing Modified ASTM D695 Compression BSS 7260 (Type III) CEMS DT-4 Custom Custom Compression Custom Flex Test 3pt Custom Flex Test 4pt Custom Shear Custom Tensile Density Drop Weight Impact - FIT Drop Weight Impact - SCI External - ASTM C 335 External - ASTM C 377 External - ASTM D 1475 External - ASTM D 3045 External - ASTM D 3171 External - ASTM D 3530 External - ASTM D 3531 External - ASTM D 3532 External - ASTM D 4639 External - ASTM D 648 External - ASTM D 696 External - ASTM E 1356 External - ASTM E 228 External - ASTM E 662 External - ASTM E 831 External - ASTM E 84 External - Glass Transition Freeze-Thaw Resistance (40d) GB/T GB/T GB/T Gelcoat Flexibility (TN-TS-01A) ISO ISO ISO 1172 ISO ISO ISO ISO Evaluation of Gelcoat in Compression Bearing Strength Compression Strength / Modulus Tabbed Compression International Impact Test Custom Test Set-up Custom Compression Test Custom 3 Point Flex Test Custom 4 Point Flex Test Custom Shear Test Custom Tensile Test Instrumented Drop Weight FIT Drop Weight SCI Thermal conductivity Thermal conductivity Density of Liquid Coatings Heat Aging of Plastics by Resin Digestion Volatiles Content of Prepreg Resin Flow of Carbon Fiber-Epoxy Prepreg Gel Time of Carbon-Epoxy Pre-Preg Volatile Content of Resins Heat Deflection Temperature Coefficient of Linear Thermal Expansion Differential Scanning Calorimetry Linear Thermal Expansion of Solids with a Vitreous Silica Dilatometer Fire Gas Toxicity Thermomechanical Analysis Surface Flammability Glass Transition Temp 40 Day Freeze Exposure Tensile Strength/Modulus & Poissons Ratio Charpy Impact CoREZYN Gelcoat Flexibility - Flex Strip Test Differential Scanning Calorimetry Thermomechanical Analysis Compression Strength / Modulus Weight Fraction Short Beam Shear Strength
4 ISO 1675 ISO 178 ISO 1887 ISO 1922 ISO 2555 ISO 2896 ISO 3268 ISO 3521 ISO 4585 ISO ISO ISO 604 ISO 62 ISO 844 ISO 845 Mea. - Average ply thickness Mea. - Corrosion Barrier Mea. - Panel Measurements Mea. - Panel Thickness Misc - Engineering Overview Misc - Expediting Fee Misc. - Additional Machining Misc. - Additional Material Costs Misc. - CB Removal Misc. - Expediting Fee Misc. - Panel Conditioning Misc. - Panel Fabrication Misc. - Panel Fabrication - Resin Casting Misc. - Panel Postcure Cycle Misc. - Return Materials Misc. - Return Materials (Pickup) Misc. - Return Samples Misc. - Return Samples (Pickup) Misc. - Water Jet Cutting Misc. - Weekend Surcharge Misc.- Vaccume Test Chamber Manufacturing Not Testing - ASTM C 109 Not Testing - ASTM D 2290 Not Testing - ASTM D 3410 Not Testing - ASTM D 5448 Not Testing - ASTM D 5449 Paccar - ASTM D256 Density of fluids Fiber Content Core Shear / Modulus Resins Apparent Viscosity Volumetric Shrinkage Short Beam Shear Compressive Properties Core Compression Apparent Density Average Ply Thickness Corrosion Barrier Thickness Panel Measurements Average Panel Thickness Engineering Overview Services Additional Machining of Samples Costs of Procuring Additional Materials for testing Corrosion liner removed from samples prior to testing Environmental conditioning Panel Fabrication Resin casting Panel Postcure Process Return leftover materials when finished Return leftover materials when finished Return tested samples when finished Return tested samples when finished Additional machining cost Weekend Facilities Surcharge Vaccume Test Chamber Manufacturing Compressive Strength of Cement Hoop Tensile Strength by Split Disk Compressive Strength / Modulus Cylinder Inplane Shear Cylinder Compression Impact Resistance - Method E, Unnotched
5 Paccar - ASTM D256 - Method A Paccar - ASTM D2584 Paccar - ASTM D2584 filler Paccar - ASTM D570 Paccar - ASTM D638 Paccar - ASTM D638 - Elongation Paccar - ASTM D695 Paccar - ASTM D732 Paccar - ASTM D790 Paccar - ASTM D792 Reporting - Additional Report Content Reporting - Extra Copies Reporting - PE Certification Reporting - Photograph of Planned Cuts Reporting - Photograph Samples - After Impact Resistance w/ Filler - with Elongation Compressive Strength/Modulus Through-Plane Shear Strength (Punch Shear) Additional Content Reporting [per hour] Extra Copies of Report Professional Engineering Services [per hour] Photograph of Planned Cuts from Sample Panels Photographs of samples after testing Reporting - Photograph Samples - Before Photographs of samples before testing Reporting - Special Report Non-Standard Report Request Reporting - Video Recording Video Recording of Test Resin Uptake Resin Uptake Measurement on Bare Foam Core Reverse Impact Cracking (Freightliner ) Reverse Impact Cracking RTP-1 Acetone Sensitivity Acetone Sensitivity RTP-1 Panel Flatness Panel Flatness RTP-1 Panel Squareness RTP Squareness Measurement RTP-1 Secondary Bonder Qualification (M5-4) Sacma Compression (SRM 1R-94) SAE J1525 SAE J1553 Screw Torque Shore-D Viscosity WUC 3.6 Impact WUC 3.6 Lateral WUC 3.6 Lateral 2 WUC 3.6 Pullout WUC 3.6 Torque WUC 3.6 VC WUC 3.6 VOC Secondary Bond Qualification SACMA Compression Test Metal to Metal Adhesive Lapshear Cross Peel Screw Torque Shore-D Hardness Viscosity Cover Drop Impact Test Cover Insert Pullout Cover Insert Torque Test 10 Cycle Vertical Center w/ final load cycle 10 Cycle Vertical Off Center w/ final load cycle
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ELEMENT LOS ANGELES 1857 Business Center Drive Duarte, CA John Moylan Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT LOS ANGELES 1857 Business Center Drive Duarte, CA 91010 John Moylan Phone: 818 247 4106 MECHANICAL Valid To: July 31, 2018 Certificate Number: 0096.01
More informationPhoto. Materials Testing for Manufacturers and Retailers
Photo Materials Testing for Manufacturers and Retailers UL helps you bring safe, high performance materials to the market while protecting your brand When end-product manufacturers are searching for materials
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WESTMORELAND MECHANICAL TESTING & RESEARCH, INC. 1 221 Westmoreland Drive Youngstown, PA 15696 Michael Self Phone: 724 537 3131 E-mail: mself@wmtr.com MECHANICAL
More informationPart 4 MECHANICAL PROPERTIES
Part 4 MECHANICAL PROPERTIES Fiber Composite Materials M. S. Ahmadi 192 TENSILE PROPERTIES Tensile properties, such as tensile strength, tensile modulus, and Poisson s ratio of flat composite laminates,
More informationEngineered Honeycomb Solutions and Services. Honeycomb Panels
Engineered Honeycomb Solutions and Services Honeycomb Panels Plascore Honeycomb Panels Light, Strong, Tough, Cost-Effective Plascore Honeycomb Panels are a high-strength, lightweight material that provide
More informationSTANDARDIZATION IN GEOTECH SECTOR V.K.PATIL
STANDARDIZATION IN GEOTECH SECTOR V.K.PATIL BOMBAY TEXTILE RESEARCH ASSOCIATION L.B.S.MARG, GHATKOPAR (W),MUMBAI-400086. WEB : btraindia.com e-mail : btra@vsnl.com What are Standards? Standards are published
More informationNTPEP Evaluation of Epoxy and Resin Based Adhesive Bonding Systems.
Standard Practice for NTPEP Evaluation of Epoxy and Resin Based Adhesive Bonding Systems. AASHTO Designation: [Number] American Association of State Highway and Transportation Officials 444 North Capitol
More informationTesting of Long Fiber Reinforced Composites
Intelligent testing Testing of Long Fiber Reinforced Composites Helmut Fahrenholz, Zwick Contents Applications of advanced composites The supply chain Test methods Testing machines and instruments Testing
More informationProduct Guide Specification
April 2014 6840 SW 81 Terrace Miami, Florida 33143 Phone 305-666-6676 Fax 305-666-7675 Website www.trimstonepanels.com E-mail stoneworks@stoneworksofart.com Product Guide Specification Specifier Notes:
More informationDNVGL-CP-0086 Edition March 2016
CLASS PROGRAMME Type approval DNVGL-CP-0086 Edition March 2016 The electronic pdf version of this document, available free of charge from http://www.dnvgl.com, is the officially binding version. FOREWORD
More informationCOMPOSITE MATERIALS HANDBOOK. Volume. Structural Sandwich. Composites
COMPOSITE MATERIALS HANDBOOK Structural Sandwich Volume 6 Composites TABLE OF CONTENTS Page FOREWORD... ii CHAPTER 1 GENERAL INFORMATION... 1 1.1 INTRODUCTION TO THE HANDBOOK... 1 1.2 OVERVIEW OF HANDBOOK
More informationViscosity, Brookfield # 2 30 rpm 425 mpas (cps) Percent Solids 57 % Color <5 Gardner Specific Gravity 1.16 gm/cc
Document 2907 V5 F2, Language EN V1, Approved 2015-9-16, 2016 Ashland Inc. Page 1 (5) DERAKANE 510 B-400 Epoxy Vinyl Ester Resin is a low viscosity, unpromoted, flame retardant (1) epoxy vinyl ester. This
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 IMR TEST LABS 131 Woodsedge Drive Lansing, NY 14882 Deena Crossmore Phone: 607-533-7000 Deena.Crossmore@imrtest.com MECHANICAL Valid to: April 30, 2020 Certificate
More informationCYCOM 7668 EPOXY RESIN
DESCRIPTION CYCOM 7668 resin is a curing flame retardant epoxy formulated for use with fiberglass in structural laminates and sandwich panels for aircraft exteriors. Woven fabric impregnated with 7668
More informationAmodel AS-1133 HS. polyphthalamide. Technical Data Sheet
Technical Data Sheet Amodel AS-1133 HS Amodel AS-1133 HS is a 33% glass reinforced, heat stabilized (PPA) resin that provides excellent structural integrity in molded parts, even those with wall thicknesses
More informationImproving the Cosmetic Quality and Finished Durability of Glass Fiber Reinforced Composites. ArmorGuard ARMORCOTE
Improving the Cosmetic Quality and Finished Durability of Glass Fiber Reinforced Composites ArmorGuard ARMORCOTE Cosmetic Quality Products with the best cosmetics are perceived to be higher quality are
More informationFRP Specifications. Section Fiberglass Reinforced Polymer (FRP) Structural Shapes/Plate and Fabrications REVISED
FRP Specifications Section 06 71 00 Fiberglass Reinforced Polymer (FRP) Structural Shapes/Plate and Fabrications REVISED 11.2016 BRISTOL FACILITY 400 Commonwealth Ave., P. O. Box 580, Bristol, VA 24203-0580
More informationDiscoTex : Highly Formable Carbon Fiber Fabric
DiscoTex : Highly Formable Carbon Fiber Fabric Elizabeth K. Goodine Pepin Associates 15 Log Home Rd Greenville, ME 04441 ABSTRACT The aerospace structures community continues to face manufacturing, performance,
More informationEco Deco Building System
Eco Deco Building System ALUMINUM COMPOSITE PANEL Introduction Eco Deco Aluminium Honeycomb Panel is a Green Product Eco Deco aluminium honeycomb panel is diligently manufactured by two aluminium sheets
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited WESTMORELAND MECHANICAL TESTING & RESEARCH Youngstown, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance
More informationTechnical Datasheet Ashland Performance Materials
Document 2161 V2 F2, Language EN V1, Approved 2008-12-29, 2011 Ashland Inc. Page 1 (8) HETRON FR992 resin is a low viscosity, unpromoted, flame retardant (1) patented epoxy vinyl ester with F-Cat technology.
More informationCycom Modified Cyanate Prepreg System
TECHNICAL DATA SHEET AEROSPACE MATERIALS Cycom 55-2 Modified Cyanate Prepreg System DESCRIPTION The Rigidite 55-2 Prepreg System is a 350 F (177 C) curing modified cyanate ester resin. This system has
More informationFILM ADHESIVES NOMINAL CURE TEMP F (C ) / TIME. 250 (121) / 60 min Cream. 250 (121) / 60 min Cream. 250 (121) / 60 min Cream. 260 (126) / 20 min Cream
FILM ADHESIVES LC-E220 LC-E221 LC-E221ET LC-E221FR LC-E221QC LC-E222 LC-E23 LC-E224 LC-E225 Elevated Tg vs. LC-E221 Additional vs LC-E221 with Accelerated Cure Cycle vs LC-E221 Optically Clear, Low Temp
More informationSubject Index. Broadgoods, 64 Buffer strips, 5
STP893-EB/Jan. 1986 Subject Index A Acoustic monitoring (see Monitoring, acoustic) Adhesives BP-907, 211 EC 344, 322 epoxy (see also Composite materials, carbon/epoxy, graphite/epoxy, Kevlar/epoxy, S-glass/epoxy,
More informationEPOTUF Product Code: Aliphatic Amidoamine Curing Agent
January 2001 EPOTUF 37-620 Product Code: 37620-00 Aliphatic Amidoamine Curing Agent DESCRIPTION EPOTUF 37-620 is a low viscosity, aliphatic, amidoamine hardener for room temperature curing of EPOTUF epoxy
More informationFE MODELING OF CFRP STRENGTHENED CONCRETE BEAM EXPOSED TO CYCLIC TEMPERATURE, HUMIDITY AND SUSTAINED LOADING
FE MODELING OF STRENGTHENED CONCRETE BEAM EXPOSED TO CYCLIC TEMPERATURE, HUMIDITY AND SUSTAINED LOADING H. R. C. S. Bandara (Email: chinthanasandun@yahoo.com) J. C. P. H. Gamage (Email: kgamage@uom.lk)
More informationEPOTUF Product Code: Aliphatic Amidoamine Curing Agent
April 2017 EPOTUF 37-620 Product Code: 37620-00 Aliphatic Amidoamine Curing Agent DESCRIPTION EPOTUF 37-620 is a low viscosity, aliphatic, amidoamine hardener for room temperature curing of EPOTUF epoxy
More informationabcdef ACG MTA 240 VERSATILE CURE FILM ADHESIVE Product Description Features Instructions for use
ACG MTA 2 VERSATILE CURE FILM ADHESIVE Product Description MTA2 is a structural film adhesive suitable for bonding both aluminium and composite substrates either to themselves or to honeycomb core materials.
More informationTECHNYL A 205F. Key Properties. Description. Benefits. Applications. Product Data Sheet. Regional Availability
TECHNYL A 205F Description TECHNYL A 205F is an unreinforced polyamide 66 for injection moulding. It is available in natural color. Key Properties General purpose Fast cycle High fluidity Benefits The
More informationMadewell Products Corporation December Industrial Court Alpharetta, GA Office: (770) Fax: (770)
Madewell Products Corporation December 2014 7561 Industrial Court Alpharetta, GA 30004 Office: (770) 475-8199 Fax: (770) 475-8167 Product Guide Specification SECTION 03935 RESTORATION MORTAR AND EPOXY
More informationJoining of Dissimilar Automotive Materials
Joining of Dissimilar Automotive Materials P.K. Mallick William E. Stirton Professor of Mechanical Engineering Director, Center for Lighweighting Automotive Materials and Processing University of Michigan-Dearborn
More informationABS-LIKE VACUUM CASTING URETHANE FOR TECHNICAL PARTS AND PROTOTYPES BASIC PHYSICAL PROPERTIES. Appearance. Color of Finished Article
ABSLIKE BASIC PHYSICAL PROPERTIES Item Data Remarks Appearance A Comp. B Comp. Beige, black, not colored Clear pale yellow Polyols Isocyanates Color of Finished Article Ivory Adjustable to be white or
More information3M Scotchmate Reclosable Fasteners
3 Scotchmate s Technical Data March, 2008 Product Description 3M Scotchmate s offer advanced closure alternatives to zippers, screws, snaps, hooks and more. They offer greater design flexibility, faster
More informationPacific Polymers Elasto-Deck BT Guide Specification
1 07141-1 August 2016 Pacific Polymers Elasto-Deck BT Guide Specification SECTION 07141 FLUID APPLIED WATERPROOFING 2 07141-2 August 2016 Pacific Polymers Elasto-Deck BT Guide Specification SECTION 07141
More informationTechnical Datasheet Ashland Performance Materials
Document 1701 V3 F2, Language EN V1, Approved 2011-6-29, 2011 Ashland Inc. Page 1 (5) DERAKANE MOMENTUM 411-350 epoxy vinyl ester resin is based on bisphenol-a epoxy resin and provides resistance to a
More informationSPECIALTY MATERIALS, INC.
DETERMINATION OF CROSS-PLY LAMINATE STACKING SEQUENCE FOR THE COMPRESSION STRENGTH TESTING OF A UNIDIRECTIONAL BORON EPOXY MATERIAL Submitted to SAMPE Fall Technical Conference Dallas, November 6-9, 2006
More informationCYCOM 890 RTM Resin System
T E C H N I C A L D A T A S H E E T AEROSPACE MATERIALS CYCOM 89 RTM Resin System DESCRIPTION CYCOM 89 RTM is a one-part liquid epoxy resin system. It has one month out-life at room temperature which reduces
More informationEurogel GCP / GCTC 500 Series Iso-modified
Eurogel GCP / GCTC 500 Series Iso-modified s : Industrial, Transportation, Building, General purpose. Standard quality gelcoat, with stable storage and application properties. Good protection for polyester
More informationSpecifications for Concrete Embedment Liner
Specifications for Concrete Embedment Liner Part 1: GENERAL 1.01 SECTION INCLUDES A. Specifications and guidelines for MANUFACTURING high-density polyethylene embedment liners. 1.02 REFERENCES A. American
More informationDocument No.: NMS 128/3, Revision A, June 21 th, 2011
NATIONAL INSTITUTE FOR AVIATION RESEARCH Wichita State University Document No.: NMS 128/3, Revision A, June 21 th, 2011 NCAMP Material Specification This specification is generated and maintained in accordance
More informationWEIR PLATES & SCUM BAFFLES
WEIR PLATES & SCUM BAFFLES Bedford Reinforced Plastics Weir Plates and Scum Baffles are available in any SIZE, any LENGTH and any CONFIGURATION Benefits Corrosion Resistant Maintenance Free Strong Easy
More informationScotch-Weld Multi-Material & Composite Urethane Adhesives DP6310NS and DP6330NS
Adhesives Preliminary Technical Data Sheet January, 2017 Product Description 3M TM Scotch-Weld Adhesives are multi-purpose urethane adhesives for bonding a variety of composites, plastics, metals and wood.
More informationPRODUCT GUIDE SPECIFICATION
PRODUCT GUIDE SPECIFICATION Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat, SectionFormat,
More informationSeismic Analysis of Concrete Dams Workshop USSD Annual Conference April 6-7, 2017
Workshop 2017 USSD Annual Conference April 6-7, 2017 Seismic Analysis of Concrete Dams Selection of analysis Selection of Materials Properties Properties affected by state of the art for materials, mix
More informationSTRENGTHENING OF INFILL MASONRY WALLS USING BONDO GRIDS WITH POLYUREA
I.1 June 2005 STRENGTHENING OF INFILL MASONRY WALLS USING BONDO GRIDS WITH POLYUREA SUMMARY Glass fiber reinforced polymer (GFRP) grids reinforced polyurea was used to strengthen unreinforced concrete
More informationDocument No.: NMS 688/2 Rev C, September 26, 2016
Date: September 26, 2016 Document No.:, September 26, 2016 NCAMP Material Specification This specification is generated and maintained in accordance with NCAMP Standard Operating Procedures, NSP 100 265ºF
More informationScotch-Weld Acrylic Adhesives
Scotch-Weld Acrylic Adhesives Technical Data Sheet October 2016 Product Description s are high performance, two-part acrylic adhesives that offer excellent shear, peel, and impact performance. These toughened
More informationDetermination of through thickness properties for Composite thick laminate S.Vali-shariatpanahi * * Stress Engineer/Durability group leader -Airbus
Determination of through thickness properties for Composite thick laminate S.Vali-shariatpanahi * * Stress Engineer/Durability group leader -Airbus Address: Building 09J, Airbus UK,FILTON,BRISTOL BS 99
More information3M Electrically Conductive Adhesive Transfer Tape 9707
Technical Data May 2014 3M Electrically Conductive Adhesive Transfer Tape 9707 Product Description 3M Electrically Conductive Adhesive Transfer Tape (ECATT) 9707 is a pressure sensitive adhesive (PSA)
More informationPart 1 - General. Spec Component Sikadur 32 Hi-Mod. DIVISION 3 -CONCRETE Section Cast-in-Place Concrete Bonding Agents for Concrete
Spec Component 042-0101 Sikadur 32 Hi-Mod DIVISION 3 -CONCRETE Section 03300 Cast-in-Place Concrete Bonding Agents for Concrete Part 1 - General 1.01 Summary A. This specification describes the bonding
More informationAFFECT OF ENVIRONMENTAL CONDITIONS DURING INSTALLATION PROCESS ON BOND STRENGTH BETWEEN CFRP LAMINATE AND CONCRETE SUBSTRATE
AFFECT OF ENVIRONMENTAL CONDITIONS DURING INSTALLATION PROCESS ON BOND STRENGTH BETWEEN CFRP LAMINATE AND CONCRETE SUBSTRATE M. Ekenel, J. J. Myers and A. L. Khataukar Center for Infrastructure Engineering
More informationDURABILITY OF PRESSURE SENSITIVE ADHESIVE JOINTS
DURABILITY OF PRESSURE SENSITIVE ADHESIVE JOINTS Paul Ludwig Geiss, Daniel Vogt Kaiserslautern University of Technology, Faculty Mechanical and Process Engineering, Workgroup Materials and Surface Technologies
More informationFirst Class Building Products, Inc.
PART 1- GENERAL 1.01 SUMMARY First Class Building Products, Inc. A. Related sections: 1.02 REFERENCES GLASS-FIBER REINFORCED GYPSUM (GRG) 1. Division 5, Metal Stud Framing 2. Division 7, Sealants 3. Division
More informationCOMPRESSIVE AND SHEAR PROPERTIES OF POLYESTER AND POLYIMIDE FILM HONEYCOMB
U. S. FOREST SERVICE RESEARCH PAPER FPL 75 OCTOBER 1967 COMPRESSIVE AND SHEAR PROPERTIES OF POLYESTER AND POLYIMIDE FILM HONEYCOMB CORE FOREST PRODUCTS LABORATORY FOREST SERVICE U. S DEPARTMENT OF AGRICULTURE
More informationWhen a standard or other referenced document referred to in this specification is superseded by an approved revision, the revision shall apply.
I. References When a standard or other referenced document referred to in this specification is superseded by an approved revision, the revision shall apply. II. Listing The conduit shall be listed by
More informationANSI/APA PRS Standard for Performance-Rated Structural Insulated Panels in Wall Applications
ANSI/APA PRS-610.1 Standard for Performance-Rated Structural Insulated Panels in Wall Applications 2008 APA - The Engineered Wood Association Draft 2 January 2008 Copyright 2008 by APA 7011 South 19th
More informationENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES. March 16,
ENGINEERING SPECIFICATION PULTRUDED DYNAFORM FIBERGLASS STRUCTURAL SHAPES March 16, 2015 06610-1 SECTION 06610 FIBERGLASS REINFORCED PLASTICS (FRP) FABRICATIONS PULTRUDED FIBERGLASS STRUCTURAL SHAPES PART
More informationFRP Floor Panels Standard Specification
1. Scope Furnish all labor, materials, equipment and incidentals necessary to install the fiberglass reinforced polymer (FRP) products as specified herein. The work covered by this section shall include
More informationSPECIFICATION GUIDELINE
Environmental StoneWorks specification guideline should be used to assist design professionals in the preparation of projects. Edit and delete items that may not be applicable. Verify all referenced section
More informationEPIKOTE MGS LR 235 Resin EPIKURE MGS LH Curing Agents
Product Bulletin Composites Resin laminating system with excellent mechanical properties, and a broad range of curing rates EPIKOTE MGS LR 235 Resin EPIKURE MGS LH 233-239 Curing Agents For rotor blade
More informationThe Flexural Properties of Glass Fabric/Epoxy -Rigid Polyurethane Foam Core Sandwich Composites at Different Span to Depth Ratios and Densities
Proc. of the Intl. Conf. on Advances In Engineering And Technology - ICAET-214 ISBN: 978-1-63248-28-6 doi: 1.15224/ 978-1-63248-28-6-3-87 The Flexural Properties of Glass Fabric/Epoxy -Rigid Polyurethane
More informationProduct Data Sheet Sikadur -31 CF Normal Product Description Uses ruction Const Characteristics / Advantages
Construction Product Data Sheet Edition 02/12/2013 Identification no: 02 04 02 03 001 0 000039 Sikadur -31 CF Normal 2-part thixotropic epoxy adhesive Product Description Uses Characteristics / Advantages
More informationCHAPTER 11: PRESTRESSED CONCRETE
CHAPTER 11: PRESTRESSED CONCRETE 11.1 GENERAL (1) This chapter gives general guidelines required for the design of prestressed concrete structures or members with CFRM tendons or CFRM tendons in conjunction
More informationSurf Clear EVO Epoxy system for surfboards
Page 1 / 6 Surf Clear EVO Epoxy system for surfboards Sicomin Surf Clear EVO epoxy system is specially formulated for the manufacturing of surf boards. Surf Clear EVO is suitable for hand lay up of glass,
More informationThermally Conductive Epoxy Product No
PELCO T E C H N I C A L N O T E S DESCRIPTION Thermally Conductive Epoxy Product No. 16027 Product No. 16027 Thermally Conductive Epoxy, Encapsulating and Potting Compound, is an electric grade epoxy.
More informationBenzoxazine Resin for Aerospace Interior Applications. By Dong Wang Huntsman Advanced Materials
Benzoxazine Resin for Aerospace Interior Applications By Dong Wang Huntsman Outline Background and challenges Huntsman ADMAT product-line and benzoxazine technology overview Benzoxazine resin for transportation
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12215-1 First edition 2000-09-01 Small craft Hull construction and scantlings Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate Petits navires
More informationTAMDID PIPES GRP MANHOLE BROCHURE
TAMDID PIPES GRP MANHOLE BROCHURE 1) Types & Description of Manholes: Tamdid Pipes offer two types of Manholes; Structural and Liner Manholes: a. Structural Manholes Tamdid Pipes offers concentric and
More informationSPECIFICATION FOR REINFORCED SOIL WALL
SPECIFICATION FOR REINFORCED SOIL WALL 1.0 EXTENT OF WORK The work shall consist of Reinforced Soil walls built in accordance with this specification and in conformity with the lines, levels and details
More informationTYPICAL PHYSICAL STRENGTH PROPERTIES OF PRO TILE
TYPICAL PHYSICAL STRENGTH PROPERTIES OF PRO TILE The following results of eight different tests show the typical physical strength properties of Pro Tile. IMPACT STRENGTH Date: September 19, 1983 cement
More informationUpgrading the shear strength of non-ductile reinforced concrete frame connections using FRP overlay systems
Upgrading the shear strength of non-ductile reinforced concrete frame connections using FRP overlay systems Mohamad J. Terro Associate Professor. Civil Engineering Department, Kuwait University. Sameer
More informationLOCTITE HC AERO
INTRODUCTION is a toughened 250 F/121 C curing, low density epoxy syntactic core material with superior moisture resistance. is co-curable with a wide variety of 250 F/121 C curing epoxy prepreg systems.
More informationDRAFT - MOCA STANDARD for Fiber-Reinforced Magnesium Cement Board
1. Scope 1.1 This standard defines the minimum prescriptive quality and performance requirements for Fiberreinforced Magnesium Cement Board products intended for use in buildings in North America. For
More informationBLOW MOULDING. Blow moulding is a process used to produce hollow objects from thermoplastic.
1 BLOW MOULDING Blow moulding is a process used to produce hollow objects from thermoplastic. The basic blow moulding process has two fundamental phases. First, a parison (or a preform) of hot plastic
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-06 71 33 (February 2015) ----------------------------- Preparing Activity: NASA Superseding UFGS-06 71 33 (May 2012) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
More information- An alternate for low styrene content (HAP) is available as DERAKANE resin.
Document 1228 V5 F2, Language EN V1, Approved 2015-9-16, 2016 Ashland Inc. Page 1 (5) DERAKANE 411-350 epoxy vinyl ester resin is based on bisphenol-a epoxy resin and has become the "industry standard"
More informationSEBASTIAN FISCHER Universität Stuttgart, Institut für Flugzeugbau, Stuttgart, Germany
SANDWICH STRUCTURES WITH FOLDED CORE: MANUFACTURING AND MECHANICAL BEHAVIOR SEBASTIAN FISCHER Universität Stuttgart, Institut für Flugzeugbau, 70569 Stuttgart, Germany SEBASTIAN HEIMBS EADS Innovation
More informationEpoxy Infusion System Hardener SIN B17
-------------------------Composite Systems for Wind Energy Technology---------------------- Epoxy Infusion System Hardener SIN B17 Polynt s SIN B17 is the world s first Epoxy resin hardener based on anhydride
More informationFRP Composite Piles Applications & Durability Considerations
FRP Composite Piles Applications & Durability Considerations by Miguel A. Pando, Felipe J. Acosta, P.E. UPRM mpando@uprm.edu, facosta@uprm.edu Jack Lesko Virginia Tech Virginia Fiber-Reinforced Composites
More informationPB 250, PB 400 / SD 560x Resilient & ambient curing epoxy foam
PB 250, PB 400 / Resilient & ambient curing epoxy foam Page 1 / 5 PB products are 2 component epoxy foaming formulations developed for in situ low density epoxy foam production. Foam final density is depends
More informationDIVISION 9 FINISHES Section Floor Finishes
Spec Component: SC-032-0807 Supersedes: SS-032-0601 DIVISION 9 FINISHES Section 09600 Floor Finishes Part 1 - General 1.01 Summary A. This specification describes the application of a waterproofing, slip
More informationSPECIFICATION GUIDELINE
SPECIFICATION GUIDELINE Environmental Stoneworks Corporate Office 6300 East Stapleton Drive South Denver, CO 80216 Phone (303) 309-3040 Fax (303) 309-3059 www.estoneworks.com Environmental Stoneworks specification
More informationCarbon-fiber Reinforced Concrete with Short Aramid-fiber Interfacial Toughening
2016 International Conference on Electronic Information Technology and Intellectualization (ICEITI 2016) ISBN: 978-1-60595-364-9 Carbon-fiber Reinforced Concrete with Short Aramid-fiber Interfacial Toughening
More informationAraldite LY 5052 Resin / Aradur 5052 Hardener
Araldite LY 5052 Resin / Aradur 5052 Hardener Product Description Araldite LY 5052 is a low-viscosity epoxy resin that is used with Aradur 5052, a mixture of polyamines, to form a cold curing epoxy system.
More informationRetrofitting of Reinforced Concrete Beam with Externally Bonded CFRP
IJIRST International Journal for Innovative Research in Science & Technology Volume 2 Issue 07 December 2015 ISSN (online): 2349-6010 Retrofitting of Reinforced Concrete Beam with Externally Bonded CFRP
More informationFundamentals of Concrete
Components Cement Water Fine Aggregate Coarse Aggregate Fundamentals of Range in Proportions Advantages of Reducing Water Content: Increased strength Lower permeability Fundamentals of Increased resistance
More informationSPECIALTY MATERIALS, INC.
SPECIALTY MATERIALS, INC. Manufacturers of Boron and SCS Silicon Carbide Fibers and Boron Nanopowder EVALUATION OF BORON/EPOXY DOUBLERS FOR REINFORCEMENT OF COMMERCIAL AIRCRAFT METALLIC STRUCTURES Prepared
More informationMATERIAL SPECIFICATION FOR BEARINGS - ELASTOMERIC PLAIN AND STEEL LAMINATED
ONTARIO PROVINCIAL STANDARD SPECIFICATION METRIC OPSS.PROV 1202 NOVEMBER 2016 MATERIAL SPECIFICATION FOR BEARINGS - ELASTOMERIC PLAIN AND STEEL LAMINATED TABLE OF CONTENTS 1202.01 SCOPE 1202.02 REFERENCES
More informationPolymer Matrix Composites: Guidelines for Characterization of Structural Materials
Composite Materials Handbook Volume 1 CMH-17 Polymer Matrix Composites: Guidelines for Characterization of Structural Materials The Composite Materials Handbook, referred to by industry groups as CMH-17,
More informationMECHANICAL CHARACTERIZATION OF SANDWICH STRUCTURE COMPRISED OF GLASS FIBER REINFORCED CORE: PART 1
Composites in Construction 2005 Third International Conference Lyon, France, July 11 13, 2005 MECHANICAL CHARACTERIZATION OF SANDWICH STRCTRE COMPRISED OF GLASS FIBER REINFORCED CORE: PART 1 S.V. Rocca
More informationA Study on Cotton-Ramie Fabric Reinforced Composites
International Journal of Materials Science ISSN 0973-4589 Volume 12, Number 1 (2017), pp. 117-125 Research India Publications http://www.ripublication.com A Study on Cotton-Ramie Fabric Reinforced Composites
More informationMECHANICAL AND PHYSICAL PROPRIETIES
Kera-Coat Ceramic Coatings are Special Ceramic Coating defined as a substantially vitreous or glassy inorganic coating bonded to metal by fusion at a temperature above 800 F. In this short abstract we
More informationTHE DESIGN OF EXTERNALLY BONDED REINFORCEMENT (EBR) FOR REINFORCED CONCRETE STRUCTURES BY MEANS OF FIBRE REINFORCED POLYMERS (FRP)
THE DESIGN OF EXTERNALLY BONDED REINFORCEMENT (EBR) FOR REINFORCED CONCRETE STRUCTURES BY MEANS OF FIBRE REINFORCED POLYMERS (FRP) Introduction Dott. Ing. Giovanni Cerretini Studio Technica (studio@technica.net)
More informationACP-PE MATERIAL SPECIFICATION
Q-NAP ACP is the Brand Name of Aluminum Composite Panels manufactured in Qatar by Qatar National Aluminum Panel Co. (Q-NAP) P.O. Box:37809 Doha Qatar, our registered office is situated at No. 41, Al Watan
More informationReinforced Thermoset Plastic Corrosion-Resistant Equipment
ASME RTP-1 2007 (Revision of ASME RTP-1 2005) Reinforced Thermoset Plastic Corrosion-Resistant Equipment AN AMERICAN NATIONAL STANDARD Three Park Avenue New York, NY 10016 Date of Issuance: April 9, 2008
More informationSECTION MANUFACTURED ROOF EXPANSION JOINTS
SECTION 07 71 29 - MANUFACTURED ROOF EXPANSION JOINTS PART 1 -GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
More informationImproved vinyl ester technology for anticorrosion and high performance laminates/grp structures. Stefanie Römhild Paris
Improved vinyl ester technology for anticorrosion and high performance laminates/grp structures Stefanie Römhild Paris 11.03.2014 DION IMPACT 9133 Premium bisphenol A epoxy based vinyl ester resin designed
More informationALPOLIC /fr LT. Technical Manual. Section 2 Characteristics. Contents
ALPOLIC /fr LT Technical Manual Section 2 Characteristics Contents 1 General 12 2 Physical properties 12 3 Mechanical properties 14 4 Impact resistance 15 5 Bendable limit 16 6 Fire performance 16 7 Non-permeability
More informationEXPERIMENTAL STUDY ON DOUBLE LAP JOINTS COMPOSED OF HYBRID CFRP/GFRP LAMINATE
EXPERIMENTAL STUDY ON DOUBLE LAP JOINTS COMPOSED OF HYBRID CFRP/GFRP LAMINATE Hiroshi MUTSUYOSHI 1) and Nguyen Duc HAI 1) 1) Structural Material Lab., Department of Civil and Environmental Engineering,
More informationDuPont Zytel 73G30L NC010
Product Information PRODUCT INFORMATION Common features of Zytel nylon resin include mechanical and physical properties such as high mechanical strength, excellent balance of stiffness and toughness, good
More information