Professional Testing Services Pte Ltd Certificate No. : LA G 32 Kian Teck Road Singapore Issue No. : 19 TESTS/ PROPERTIES
|
|
- Griffin Bond
- 6 years ago
- Views:
Transcription
1 Professional Testing Services Pte Ltd Certificate No. : LA G 32 Kian Teck Road Singapore Issue No. : 19 FIELD OF TESTING : Mechanical Testing Date : 05 January 2017 Page : 1 of 7 A. METALS & METALS 1. Tension Test ASTM A PRODUCTS ASTM B (i) Tension on test plates & tubular ASTM E8/E8M-2016a sections at ambient temperature in the range of 0 kn to 2000 kn *AWS D1.1/D1.1M: 2015 with controlled strain rate & crosshead movement, including yield & *AWS D1.4/D1.4M: 2011 *AWS D1.6/D1.6M:2007 proof stress *AWS D1.2/D1.2M:2014 *API 1104:2013 (Addendum 2:2016) BS EN Pt 1: 2001 *NKK Rules Part K Chapter 2.3.1: 2015 AS 1391: 2007 (Amendment 1:2012) AS : 2003 AS : 2003 ASTM F606: 2014a (Clause 3.2.1, 3.2.3, 3.4, 3.6) ASTM F606/F606M-2014a BS EN ISO 898-1: 2013 (Sect 8.1, 8.2, 8.5) BS EN ISO 898-2: 2012 BS 4190: 2014 BS 4449: 2005+A3:2016 BS 3692: 2014 API 1104:2013 (Addendum 2:2016) SS 560: 2016 BS EN ISO : 2010 (ii) Ultimate tensile strength of re-bar *SS 456: 1999 in the range of 0 kn to 2000 kn SS 2 Part 1: 1999 SS 2 Part 2: 1999
2 Date : 05 January 2017 Page : 2 of 7 (iii) Modulus of elasticity on test SS 2 Part 3: 1987 pieces In the range of 0 kn to BS EN ISO : kn BS 4449: A3: 2016 SS 18 Part 1: 1999 (iv) Tensile Test at Elevated Temp. ASTM E (up to 750 C) in the range of BS EN ISO : kn to 250 kn with controlled strain rate &cross-head movement, including yield & proof stress (v) Through Thickness Tensile ASTM A770 / A770M-2003 Test (Reapproved : 2012) BS EN : 2004 *Lloyd s Pt. 2, Chapter 3, Sect 8:2015 *ABS Pt. 2, Chapter 1, Sect 1-17: 2016 (vi) All Weld Tensile Test ASME IX-2013 *AWS D1.1/D1.1M.2008 BS EN ISO 9018: Hardness Tests ASTM E (i) Vickers Hardness test in the ASTM A range of 0.3 kgf to 50 kgf ASTM E b e1 ASTM E BS EN ISO : 2011 BS EN ISO : 2005 AS 1817 Pt 1: 2003 (ii) Rockwell Hardness 'C' Scale ASTM E BS EN ISO : 2016 (iii) Brinell Hardness ASTM E a BS EN ISO 6506: Compression Test (i) Compression strength, up to ASTM E kn in loading
3 Date : 05 January 2017 Page : 3 of 7 4. Shear Test ASTM B (2015) *SS 32 Part 1: 1999 ASME II Part A-2015, SA ASTM A ASTM A ASTM A Impact Test (i) Charpy V-notch Impact tests ASTM A from ambient temperature *AWS D1.1/D1.1M-2015 own to C & C ASTM E b BS EN : 1990 BS EN ISO 148-1: 2010 AS 1544 Pt 2: Bend Test / Roller bend test ASTM A AWS D1.1/D1.1M: 2015 *API 1104: 2013 (Addendum 2: 2016) BS EN ISO 5173: A1:2011 ASTM E190: 2014 ASTM E290: 2014 AS : 2003 AS : 2003 AWS D1.6/D1.6M: 2007 AWS D1.2/D1.2M: Bend Test / Rebend Test SS 2 Part 1: 1999 SS 2 Part 2: 1999 SS 2 Part 3: 1987 *SS 32 Part 1: 1999 *SS 32 Part 2: 1986 BS 4449: A3: 2016 *SS 18 Part 1: 1999 SS 427: 1998 SS 560: 2016 BS EN ISO : Fracture Test *AWS D1.1/D1.1M-2015 BS EN ISO 9017:2013 AWS D1.6/D1.6M: 2007 AWS D1.2/D1.2M: 2014
4 Date : 05 January 2017 Page : 4 of 7 9. Flattening Test ASTM A *ABS Pt. 2, Chapter 3, Sect 5-19 : 2016 *Lloyd s Pt. 2, Chapter 2, Sect 4.2: 2015 API 5L: 2012 Addendum 1: 2009 Addendum 2: 2010 Addendum 3: 2012 BS EN ISO Flaring/Flanging Test ASTM A (up to outside diameter of 2 *ABS Pt. 2, Chapter 3, Sect 5-23 & 25:2016 inches) *Lloyd s Pt. 2, Chapter 2, Sect 4.4:2015 BS EN ISO 8493: 2004 BS EN ISO 8494: Nick-Break Test ASTM A *API 1104: 2013 (Addendum 2: 2016) 12. Microscopic Examination ASTM E (Reapproved 2012) Macroscopic examination on welds *AWS D1.1/D1-1M-2015 *API 1104: 2013 (Addendum 2: 2016) BS EN ISO17639: Macro-etching metals & alloys ASTM E *AWS D1.1/D1.1M-2015 AS : Determination of Metal Composition (i) Carbon and low-alloy ASTM A a steels Elements ASTM E Al, B, C, Cr, Co, Cu, Mn, Mo, N, Ni, Nb, P, Si, S, Sn, Ti, V, W (ii) Stainless Steels : ASTM A a Elements ASTM E Cr, Ni, Mo, Mn, Si, N, Cu, C, P, S (iii) Nickel & Nickel Alloys PTS-M001 (Spark OES Method) Elements: Al, C, Cr, Co, Cu, Fe, Mn, Mo, Ni, Nb, P Si, S, Ti, W, V
5 Date : 05 January 2017 Page : 5 of 7 (iv) Positive Material ASTM A a Identification ASTM E (Reapproved 2014) 15. Portable Hardness Test ASTM E ASTM A ASTM E10: 2015a 16. Pitting Corrosion ASTM G (2015) Method A, Method B 17. Detecting Susceptibility to Intergranular ASTM A Attack in Austenitic Stainless Steels Practice A (ii) & E (i) 18. Detecting susceptibility to Intergranular ASTM G (2015) Attack in Wrought, Nickel-Rich, Chromium Bearing Alloys 19. Determining Volume Fraction by ASTM E Systematic Manual Point Count 20. Fracture Mechanics Toughness Test, BS : 1991 Crack Tip Opening Displacement BS : 1997 (CTOD) Test (Bend specimen) ASTM A BS EN ISO 15653: Hydrogen Induced Cracking (HIC) NACE Standard TM Test item no (SSCC) Test ASTM G (2016) ASTM A BS EN ISO : 2012 BS EN ISO : 1995 NACE Standard TM item no Salt Spray Test ASTM B Fatigue Test MS 146: 2014 BS 4449: A3: 2016 SS 560: 2016 BS EN ISO : Relaxation Test JIS-G-3137: 2008
6 Date : 05 January 2017 Page : 6 of Detecting detrimental intermetallic ASTM A923 Method A (ii) & C phase in duplex austenitic/ferrite (i) : 2014 stainless steels 27. Determining average grain size ASTM E112: Determination of Diffusible Hydrogen AWS A Content of Weld Metal, via Gas DIN EN ISO Chromatography, Produced by Arc Welding B. STEEL WIRE MESH 1. Tension Test (Grade 300 and 500) (Grade 485) (i) Tension on steel wires taken *SS 32 Part 1: 1999 from wire fabric at ambient *SS 32 Part 2: 1986 temperature in the range 0 kn *SS 18 Part 1: 1999 to 600 kn with controlled strain SS 456: 1999 rate & cross-head movement, SS 18 Part 2: (1981) including yield and proof stress. SS 561: 2010 BS EN ISO : 2010 (ii) Determination of percentage *SS 18 Part 1: 1999 total elongation at maximum *SS 32 Part 1: 1999 force 2. Bend and Rebend Test SS 427: 1998 SS 561: 2010 BS EN ISO : Weld Shear Test *SS 32 Part 1: 1999 *SS 32 Part 2: 1986 SS 561: 2010 (*) : Specification
7 Date : 05 January 2017 Page : 7 of 7 Approved Signatories 1. Mr Tee Chng Kin - all accredited tests 2. Mr Seto Yuen Hee - item A1 A13 & B1 B3 3. Mr Teo Chiang Hiong - item A14 A15 4. Mr Ong King Liong - item A14 A15, A28 5. Mr Meng Tzee Luai - item A16 A19 & A26 A27 6. Mr Johnson Lee Gao Shan - item A16 A19, A21 A22 & A26 A27 7. Mr Kelvin Por Wei Han - item A20 A25 8. Mr Kelvin Loh Kiar Meng - item A16, A17(i), A18 A19, A21 A22, A26(i), A27 9. Mr Lam Hoong Xun - item A1 A13, B1 B3 & A Mr Danny Ton That Phu Duc - item A1 A13 & B1 B3 11. Mr Edwin Jiang Xin Xin - item A1 A13 & B1 B3 12. Mr Tang Tung Yieng - item A14 A Mr Luke Joon Shiong - item A14 A Mr Alsert Chua Chee Meng - item A14 A15, A Mr Gregory Chua Shyang Shyang - item A21 A22, A Mr Kenneth Kong Thean Soon - item A20, A1-A13, B1-B3 Note : This laboratory is accredited in accordance with the recognised International Standard ISO/IEC 17025:2005. A laboratory's fulfilment of the requirements of ISO/IEC 17025:2005 means the laboratory meets both the technical competence requirements and management system requirements that are necessary for it to consistently deliver technically valid test results. The management system requirements in ISO/IEC 17025:2005 (Section 4) are written in language relevant to laboratory operations and meet the principles of ISO 9001:2008 Quality Management Systems Requirements and are aligned with its pertinent requirements.
Schedule. Type of Test/ Properties Measured/ Range of Measurement
LABORATORY LOCATION: (PERMANENT LABORATORY) Page: 1 of 9 PROFESSIONAL TESTING SERVICES SDN BHD 7 JALAN MEGA 1 TAMAN PERINDUSTRIAN NUSA CEMERLANG 81550 GELANG PATAH, JOHOR MALAYSIA This laboratory accredited
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 19 Wildmere Road Banbury Oxfordshire OX16 3JU Contact: Mr J Guntrip Tel: +44 (0)1295 261211 Fax: +44 (0)1295 263096 E-Mail: qualityuk@wmtr.com
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18716-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.11.2014 to 13.05.2018 Holder of certificate: Institut
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11299-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.10.2016 to 16.10.2021 Holder of certificate: Salzgitter
More informationATI FLAT ROLLED PRODUCTS Brackenridge, PA for technical competence in the field of
A2LA has accredited Brackenridge, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance with the recognized International Standard ISO/IEC 17025:2005
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Element Materials Technology Sheffield Ltd, Trading as Element ccredited to 3
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18478-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 01.09.2014 to 31.01.2018 Holder of certificate: MT
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service High Street, Feltham, Middlesex, TW13 4UN, UK
Schedule of ccreditation United Kingdom ccreditation Service 21-47 High Street, Feltham, Middlesex, TW13 4UN, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom Contact:
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Schedule of ccreditation United Kingdom ccreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ccredited to Moxley Industrial Centre Western Way Wednesbury WS10 7G United Kingdom
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY BROKEN ARROW LLC 3100 North Hemlock Circle Broken Arrow, OK 74012 Gilbert Monos Phone: 918 258 6066 gil.monos@element.com MECHANICAL
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 WESTMORELAND MECHANICAL TESTING & RESEARCH, INC. 1 221 Westmoreland Drive Youngstown, PA 15696 Michael Self Phone: 724 537 3131 E-mail: mself@wmtr.com MECHANICAL
More informationATI 2205 ATI Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)
ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited WESTMORELAND MECHANICAL TESTING & RESEARCH Youngstown, PA for technical competence in the field of Mechanical Testing This laboratory is accredited in accordance
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Unit 10 Victory Park Victory Road Derby Derbyshire DE24 8ZF ontact: Mr G Tomlinson Tel: +44 (0)1332 275700 Fax: +44 (0)1332 275729 E-Mail: graham.tomlinson@ndtservices.co.uk Website: www.ndtservices.co.uk
More informationThis annex is valid from: to Replaces annex dated: Locations where activities are performed under accreditation
Locations where activities are performed under accreditation Location Abbreviation/ location code Element eda - Headfice Voorerf 18 4824 GN eda Netherlands Element Beek Schuttersstraat 27 B 6191 RZ Beek
More informationLista standard utilizzati per l'esecuzione dei test RTM Breda
ASTM E415-08 ASTM E415-14 Chemical analysis of carbon steels ASTM E415-99a RCCM MC 1350 ASTM E1086-08 Chemical analysis of stainless steels ASTM E1086-14 Quantometric chemical analysis of laminated or
More informationSCOPE OF ACCREDITATION
Standards Council of Canada 600-55 Metcalfe Street Ottawa, ON K1P 6L5 Canada Conseil canadien des normes 55, rue Metcalfe, bureau 600 Ottawa, ON K1P 6L5 Canada SCOPE OF ACCREDITATION Exova Canada Inc.
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Unit 10 Victory Park Victory Road Derby Derbyshire DE24 8ZF ontact: Mr ndy Harrison Tel: +44 (0)1332 275700 E-Mail: andy.harrison@intertek.com Website: www.ndtservices.co.uk Laboratory locations: below
More informationStainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. TSP / USB LABORATORY South Main Street Houston, TX Lester Burgess Phone:
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TSP / USB LABORATORY 1 12895 South Main Street Houston, TX 77035 Lester Burgess Phone: 713 726 1000 MECHANICAL Valid To: June 30, 2018 Certificate Number: 0929.01
More informationSANICRO 30 TUBE AND PIPE, SEAMLESS
SANICRO 30 TUBE AND PIPE, SEAMLESS DATASHEET Sanicro 30 is a low-carbon version of Alloy 800 austenitic nickel-iron-chromium alloy. The grade is used for steam generator tubing in nuclear stations (PWR)
More informationDATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING
DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance
More informationATI ATI 2205 Alloy (UNS S31803 and S32205) Duplex Stainless Steel. Technical Data Sheet
Alloy (UNS S31803 and S32205) Duplex Stainless Steel GENERAL PROPERTIES alloy (UNS S31803 and/or S32205) is a nitrogenenhanced duplex stainless steel alloy. The nitrogen serves to significantly improve
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 IMR TEST LABS 131 Woodsedge Drive Lansing, NY 14882 Deena Crossmore Phone: 607-533-7000 Deena.Crossmore@imrtest.com MECHANICAL Valid to: April 30, 2020 Certificate
More informationIMPACT. Chemical composition For the chemical composition of the ladle analysis the following limits are applicable (in %):
IMPACT Wear resistant steel Material data sheet, edition April 2016 1 DILLIDUR IMPACT is a wear resistant steel with a nominal hardness of 340 HBW in delivery condition. DILLIDUR IMPACT is not a constructional
More informationDW For Super duplex stainless ASTM3275 and ASTM32760 grade. AWS A5.22 E2594T1-1,-4 DW-N625
KOBE STEEL GROUP Spring 2010 products NEW PRODUCTS Super Duplex Stainless Flux Cored Wire DW-2594 For Super duplex stainless ASTM3275 and ASTM32760 grade. AWS A5.22 E2594T1-1,-4 Nickel Based Alloy Flux
More informationCHROMESHIELD 22 STAINLESS STEEL
CHROMESHIELD 22 STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Appliances Food Service Equipment Architectural Welded Components Tubing Cookware Applications Potential CHROMESHIELD 22 Stainless Steel
More informationASTM A335 Chrome Moly Pipe. Welcome to Sunny Steel Enterprise Ltd. By Mr. Sum Xu
ASTM A335 Chrome Moly Pipe By Mr. Sum Xu ASTM A335 Pipe (ASME S/A335, Chrome-Moly) is a seamless ferritic Alloy-Steel Pipe for high temperature service. Welcome to Sunny Steel Enterprise Ltd. Sunny Steel
More informationForta SDX 2507 EN , ASTM UNS S32750
Forta SDX 2507 EN 1.4410, ASTM UNS S32750 General characteristics Forta SDX 2507 is a super duplex product with higher corrosion resistance and mechanical strength than Forta DX 2205. Often used in extremely
More informationMore Oxidation and Creep Resistance Upgrade for Type 409. Potential Substitute for 18 Cr-Cb & Type 439. Excellent Forming and Welding Characteristics
11 Cr-Cb STAINLESS STEEL P R O D U C T D ATA B U L L E T I N More Oxidation and Creep Resistance Upgrade for Type 409 Potential Substitute for 18 Cr-Cb & Type 439 Excellent Forming and Welding Characteristics
More informationWeldable fine-grained structural steel, thermomechanically rolled
460 Weldable fine-grained structural steel, thermomechanically rolled Material data sheet, edition April 2016 1 DI-MC 460 is a thermomechanically rolled, fine-grained structural steel with minimum yield
More informationOutokumpu 2507 UNS S32750
UNS S32750 North American Version Imperial Units Design Features Very high strength High resistance to pitting, crevice, and general corrosion Very high resistance to chloride stress corrosion cracking
More informationOvermatching Superalloy Consumable Inco-weld 686CPT Broadens its Applications to Include Welding Super Austenitic and Super Duplex Stainless Steels
Overmatching Superalloy Consumable Inco-weld 686CPT Broadens its Applications to Include Welding Super Austenitic and Super Duplex Stainless Steels P0468 Authors: Ph.D C. Thornton, B.Sc C. Cooper Special
More information25%Cr SUPERDUPLEX
DATA SHEET B-62 25%Cr SUPERDUPLEX - 2507 METRODE PRODUCTS LTD HANWORTH LANE, CHERTSEY SURREY, KT16 9LL Tel: +44(0)1932 566721 Fax: +44(0)1932 565168 Sales Fax: +44(0)1932 569449 Technical Fax: +44(0)1932
More informationDAHE STEEL STRUCTURE CO.,LTD.
DAHE ENTERPRISES LIMITED DAHE STEEL STRUCTURE CO.,LTD. FOREWORD FOREWORD Dahe Enterprises Ltd registers in Hong Kong. She owns two sole-investment companies Dahe Steel Structure (HK) Co., Ltd & Nanhai
More informationProduct Test Report. PTR-3074 Swagelok Company. Rev. B Solon Road January 2015 Solon, Ohio U.S.A. Page 1 of 5
Solon, Ohio 44139 U.S.A. Page 1 of 5 TITLE Resistance of SAF 2507 Super Duplex Stainless Steel to Chloride Stress Corrosion Cracking PRODUCT TESTED Test samples were machined from Sandvik SAF 2507 solution-annealed
More informationThe ATI 17-4 precipitation hardening stainless steel (S17400) is covered by the following wrought product specifications.
ATI 17-4 Precipitation Hardening Stainless Steel (UNS S17400) INTRODUCTION ATI 17-4 precipitation hardening stainless steel (S17400), Type 630, is a chromium-nickel-copper precipitation hardening stainless
More informationWELDING CONSUMABLES FOR DUPLEX AND SUPERDUPLEX STAINLESS STEELS OPTIMISING PROPERTIES AFTER HEAT TREATMENT
WELDING CONSUMABLES FOR DUPLEX AND SUPERDUPLEX STAINLESS STEELS OPTIMISING PROPERTIES AFTER HEAT TREATMENT by G B Holloway & J C M Farrar Metrode Products Limited ABSTRACT The first 50 years of duplex
More informationVDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
More information41003 STAINLESS STEEL
41003 STAINLESS STEEL D ATA S H E E T Formable and Weldable in Heavy Sections Refined Grain Structure Leads to Good Toughness Ferritic as Annealed Low Cost AK Steel 41003 is an economical ferritic stainless
More informationComparison of BS and BS EN for steel materials
Comparison of BS and BS EN for steel materials Appendix This table only highlights the comparison of BS and BS EN on steel materials, which are relevant to plan approval. Title of BS BS BS EN Title of
More informationEAM :2003/05 Revision 01 21/10/2016
European Approval for Materials Data Sheet EAM-0879-03 This data sheet has been raised in accordance with the requirements of Article 15 of the Pressure Equipment Directive 2014/68/EU. The material described
More informationSPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE
Technical Literature: ASME SA-516 [ASTM A516] Company Website: www.metalspiping.com SA-516/SA-516M Carbon & Low Alloy Steels From Hebei Metals Industrial Limited SPECIFICATION FOR PRESSURE VESSEL PLATES,
More informationMarcegaglia USA Munhall
Marcegaglia USA Munhall 1 Marcegaglia USA The Marcegaglia USA production facility is located in Munhall, PA (just outside Pittsburgh). It is devoted to the manufacturing of stainless steel, duplex and
More informationVIRGO 17.4 PH: A 17Cr 4Ni 3Cu precipitation hardening martensitic stainless steel
Industeel VIRGO 17.4 PH VIRGO 17.4 PH: A 17Cr 4Ni 3Cu precipitation hardening martensitic stainless steel Alloy VIRGO 17.4 PH is a maraging martensitic stainless steel with Cu and Nb/Cb additions. The
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17945 First edition 2015-04-15 Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
More informationAll Metals Test Certificates
What is a test Certificate and why is it important? ~ It is effectively a Guarantee that ensures Traceability and protects all parties ~ In many cases the material has no value to a customer unless it
More informationSTRESS CORROSION CRACKING OF STAINLESS STEELS IN HIGH PRESSURE ALKALINE ELECTROLYSERS
STRESS CORROSION CRACKING OF STAINLESS STEELS IN HIGH PRESSURE ALKALINE ELECTROLYSERS Haraldsen, K. 1 and Leth-Olsen, H. 1 1 Corporate Research Centre, Norsk Hydro ASA, P.O.Box 2560, 3908 Porsgrunn, Norway
More informationDuplex Stainless Steel
Duplex Stainless Steel Steel grades Outokumpu EN ASTM LDX 211 1.4162 S3211 SAF 234 1.4362 S3234 1.4462 S3 S3183 SAF 257 1.441 S3275 Characteristic properties High strength Good to very good resistance
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationJIS G3463 Stainless Steel for Boiler and Heat Exchanger Tubes
JIS G3463 Stainless Steel for Boiler and Heat Exchanger Tubes 1. Scope This Japanese Industrial Standard specifies the stainless steel tubes (hereafter referred to as "tubes") used for exchanging heat
More informationATI Datalloy HP TM Alloy
ATI Datalloy HP TM Alloy UNS N08830 INTRODUCTION ATI Datalloy HP TM alloy is a Ni-Cr-Mo-Fe non-magnetic high strength alloy with exceptional pitting and crevice corrosion resistance, while maintaining
More informationMILITARY HANDBOOK METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES
1 DECEMBER 1998 MILITARY HANDBOOK METALLIC MATERIALS AND ELEMENTS FOR AEROSPACE VEHICLE STRUCTURES AMSC N/A FSC 1560 DISTRIBUTION STATEMENT A. Approved for public release: distribution is unlimited. FOREWORD
More informationDevelopment of large-diameter line pipe for offshore applications
Development of large-diameter line pipe for offshore applications Dr. Michael Gräf Europipe Deutschland GmbH, Muelheim, Germany Dr. Hans-Georg Hillenbrand Europipe GmbH, Ratingen, Germany EUROPIPE. The
More informationCORROSION-RESISTANT ALLOYS
CORROSION-RESISTANT ALLOYS HASTELLOY B-3 alloy A nickel-molybdenum alloy with outstanding resistance to hydrochloric and sulfuric acids in the as-welded condition and excellent thermal stability. Contents
More informationUR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments.
Industeel URANUS 2202 The alternative to 304L UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments. Its higher strength allows
More information15 Cr-Cb ULTRA FORM STAINLESS STEEL
15 Cr-Cb ULTRA FORM STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Good Elevated Temperature Strength Weldable Oxidation Resistance Resistant to Intergranular Corrosion Fine Uniform Formable Grain
More informationProcess Product Specification MMA Ultramet 347H AWS E TIG/SAW ER347H AWS ER347 FCW Supercore 347HP AWS E347T1-1/4
DATA SHEET C-11 347H STAINLESS STEEL METRODE PRODUCTS LTD HANWORTH LANE, CHERTSEY SURREY, KT16 9LL Tel: +44(0)1932 566721 Fax: +44(0)1932 565168 Sales Fax: +44(0)1932 569449 Technical Fax: +44(0)1932 566199
More informationDIN WELDABLE NORMALIZED FINE GRAIN STRUCTURAL STEELS
DIN 17102 WELDABLE NORMALIZED FINE GRAIN STRUCTURAL STEELS 1. Field of application 1.1 This standard applies hot rolled products in the form of flats (plate, strip, wide flats), sections and bars of weldable
More informationWear-resistant steels. Technical terms of delivery for heavy plates. voestalpine Grobblech GmbH
Wear-resistant steels Technical terms of delivery for heavy plates voestalpine Grobblech GmbH www.voestalpine.com/grobblech Wear-resistant steels durostat durostat 400 durostat 450 durostat 500 durostat
More informationSTANDARD FERRITIC STAINLESS STEELS
T e c h n i c a l B r o c h u r e STANDARD FERRITIC STAINLESS STEELS Unity AISI UNS EN U-40910 409 S40910 1.4512 U-430 430 S43000 1.4016 U-430DDQ 430 S43000 1.4016 U-439 439 S43035 1.4510 - S43940 U-1.4509
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ELEMENT NEWTOWN 2 Pheasant Run Newtown, PA Douglas Reed Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT NEWTOWN 2 Pheasant Run Newtown, PA 18940 Douglas Reed Phone: 267 759 3886 MECHANICAL Valid To: April 30, 2016 Certificate Number: 0478.01 In recognition
More information304/304L STAINLESS STEEL
304/304L STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Architectural Moldings and Trim Textile Kitchen Equipment Paper Pharmaceutical and Chemical Industry Processing Equipment Applications Potential
More informationHastelloy G-30 (UNS N06030) Chemical Composition
Hastelloy G-30 (UNS N06030) Hastelloy G-30 is commonly used for providing excellent resistance to chemical conditions. It offers resistance to nitric acid, phosphoric acid, hydrochloric acid and hydrofluoric
More informationSeamless tube. Sandvik SAF S-1874-ENG May 2000 Cancels all previous editions
Seamless tube Sandvik S-1874-ENG May 2 Cancels all previous editions Sandvik is a duplex stainless steel (austenitic-ferritic). It is characterised by: high resistance to stress corrosion cracking in chloride-bearing
More informationDuplex Stainless Steel
Duplex Stainless Steel Steel grades Outokumpu EN ASTM LDX 211 1.4162 S3211 SAF 234 1.4362 S3234 25 1.4462 S325 S3183 SAF 257 1.441 S3275 Characteristic properties High strength Good to very good resistance
More informationMolybdenum. Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Designation: A 387/A 387M 03
Designation: A 387/A 387M 03 Used in USDOE-NE Standards Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Molybdenum 1 This standard is issued under the fixed designation A 387/A
More informationResults are presented in Table 1. The tube was fabricated from a Type 347 and no unusual conditions were noted.
1. Introduction Hydroprocessing units such as isomax in oil refineries upgrade hydrocarbon feedstocks by converting heavier feeds into more valuable lighter products. The reactions occur under a hydrogen-rich
More information(IN ACCORDANCE WITH ISO 10474/EN10204/DIN50049 "type 3.1") SHIPPERS NO. VEHICLE I.D SPECIFICATION AND GRADE O.D.: WALL: MIN: MAX:
UNITED STATES STEEL TUBULAR S TIME: 09:07:07 CERTIFIED REPORT VEHICLE I.D SPECIFICATION AND GRADE PIPE CARBON SMLS STD PIPE API 5L-*44TH ED DTD OCT 2007 AND ISO 3183:2007 MOD PSL-2 GRADE B AND GRADE X42
More information1¼Cr-½Mo CREEP RESISTING STEEL
DATA SHEET A-12 1¼Cr-½Mo CREEP RESISTING STEEL METRODE PRODUCTS LTD HANWORTH LANE, CHERTSEY SURREY, KT16 9LL Tel: +44(0)1932 566721 Fax: +44(0)1932 565168 Sales Fax: +44(0)1932 569449 Technical Fax: +44(0)1932
More informationNickel Based Superalloy Incoloy 800 (UNS N08800)
Nickel Based Superalloy Incoloy 800 (UNS N08800) Nickel-Iron-Chromium alloy Incoloy 800 has fine strength and suitable resistance to oxidation and carburization at high temperatures. It offers elevated
More informationImpact 7 Steel. A Durable, Dependable Steel Solution For Harsh Environments. Technical Data. Alloy Description. Alloy Type. Typical Applications
Impact 7 Steel Technical Data A Durable, Dependable Steel Solution For Harsh Environments Alloy Description As a world leader in steel manufacturing, TimkenSteel specializes in providing custom steel solutions
More informationSpecification ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH All.steel f.quen.a.temp, h.str.
Class: Heat-treatable steel Specification 16-09 ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH Class No.:11 JED 723 Previous Edition Abbreviated Title 15-07 All.steel f.quen.a.temp, h.str. 8
More informationAL 29-4C AL 29-4C. Technical Data Sheet. Stainless Steel: Superferritic INTRODUCTION (UNS S44735)
AL 29-4C Stainless Steel: Superferritic (UNS S44735) INTRODUCTION AL 29-4C alloy, is a superferritic stainless steel developed by ATI in the early 1980s specifically for power plant surface condenser tubing.
More information441 STAINLESS STEEL. Good High-Temperature Oxidation Resistance. Applications Potential
441 STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Equiaxed Microstructure Good High-Temperature Strength Good High-Temperature Oxidation Resistance Applications Potential AK Steel 441 is used in
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MIAMI VALLEY MATERIALS TESTING CENTER, LLC 4155 Lisa Drive Tipp City, OH 45371 Craig Riviello Phone: 937 669 4500 MECHANICAL Valid To: November 30, 2019 Certificate
More informationCERTIFICATE OF ACCREDITATION
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Midwest Testing Laboratories, Inc. 1072 Wheaton
More informationWelding Consumables for Lean Duplex Stainless Steels
Welding Consumables for Lean Duplex Stainless Steels Graham Holloway, Adam Marshall & Zhuyao Zhang Metrode Products Ltd, UK Presenter: Presenter - Graham Holloway Graham Holloway has been at Metrode Products
More informationMatching consumables for type 800 alloys. Development history, metallurgy and performance. A W Marshall and J C M Farrar
Matching consumables for type 800 alloys Development history, metallurgy and performance A W Marshall and J C M Farrar Page 1 of 13 Matching consumables for type 800 alloys Development history, metallurgy
More informationInfluence of Post Weld Heat Treatment on the HAZ of Low Alloy Steel Weldments
Influence of Post Weld Heat Treatment on the HAZ of Low Alloy Steel Weldments S. Rasool Mohideen* and A.M. Ahmad Zaidi Faculty of Mechanical and Manufacturing Engineering, UTHM *Corresponding email: rasool
More informationSEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components
SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components Technology Transfer 91060574B-STD and the logo are registered service marks of, Inc. 1996, Inc. SEMASPEC Test Method
More informationTypes 316 (S31600), 316L (S31603), 317 (S31700), 317L (S31703)
Types 316 (S31600), 316L (S31603), 317 (S31700), 317L (S31703) GENERAL PROPERTIES Types 316 (UNS S31600), 316L (S31603), 317 (S31700) and 317L (S31703) are molybdenum-bearing austenitic stainless steels
More informationDIN SEAMLESS CIRCULAR TUBES MADE FROM STEELS WITH LOW TEMPERATURE SERVICE
DIN 17173-85 SEAMLESS CIRCULAR TUBES MADE FROM STEELS WITH LOW TEMPERATURE SERVICE The subclauses marked with a single dot give specifications which are to be agreed upon at the time of ordering. The subclauses
More information(IN ACCORDANCE WITH ISO 10474/EN10204/DIN50049 "type 3.1") SHIPPERS NO. VEHICLE I.D SPECIFICATION AND GRADE O.D.: WALL: MIN: MAX:
UNITED STATES STEEL TUBULAR S TIME: 09:22:14 CERTIFIED REPORT SHIPPERS NO. VEHICLE I.D SPECIFICATION AND GRADE PIPE CARBON SMLS STD PIPE API 5L-*44TH ED DTD OCT 2007 AND ISO 3183:2007 MOD PSL-2 GRADE B
More informationThe Convenience Stores For Metal
STEEL Data and Specifications 303 Chromium-nickel stainless steel with added sulfur or selenium and phosphorus to improve machinability and non-seizing properties. It is the most free machining of the
More informationApplied Materials. The Power of Trust. The Future of Energy.
Applied The Power of Trust. The Future of Energy. Applied EXTENDING EQUIPMENT LIFE Fluorescent magnetic particle inspection Assessment of fracture features by scanning electron microscopy Failure analysis,
More informationRA17-4 stainless. Introduction
RA17-4 stainless Introduction RA17-4 is an age-hardening martensitic alloy combining high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short-time, simple lowtemperature
More informationC27200 CuZn37 Industrial Rolled
C272 Alloy Designation EN DIN CEN/TS 13388 (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order
More informationChemical Analysis SEM/EDS. Spectroscopy. Carbon, Sulfur, Nitrogen and Oxygen Analysis
Chemical Analysis For over 30 years, APL, Inc. has been providing accurate and timely chemical analyses to our clients. To allow for the most efficient analysis of your material, a wide variety of spectrometers
More informationPRELIMINARY INVESTIGATIONS OF LOW-NICKEL STAINLESS STEELS FOR STRUCTURAL APPLICATIONS
PRELIMINARY INVESTIGATIONS OF LOW-NICKEL STAINLESS STEELS FOR STRUCTURAL APPLICATIONS J. Kerr and R. Paton Mintek, Private Bag X3015, Randburg. 2125. South Africa. E-mail: jonathank@mintek.co.za ABSTRACT
More informationTechnical Data. BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA. Stainless Steels Types 321, 347 and 348 (UNS S32100, S34700 and S34800)
Technical Data BLUE SHEET Allegheny Ludlum Corporation Pittsburgh, PA Stainless Steels Types 321, 347 and 348 (UNS S32100, S34700 and S34800) GENERAL PROPERTIES Allegheny Ludlum Type 321 (S32100), 347
More informationWELDING WIRES FOR MAG(CO 2 ) WELDING
WELDING WIRES FOR MAG(CO 2 ) WELDING Classification: EN 440 G4Si1 EN1668 WSG2 DIN 8559 SG 2 ASME/AWS/A 5.18 ER70S6 Description and Application: Solid copper coated welding wire for welding in gas shielding
More informationFlux-cored Wire Electrode for Ar+CO 2 Gas Shielded Arc Welding. "DWA-81Ni1" Productivity through filler metal selection
DOC.No.723-U47 Jun.23 Flux-cored Wire Electrode for Ar+CO 2 Gas Shielded Arc Welding "DWA-81Ni1" Doc.No.723-U47 Flux-cored Wire Electrode for Ar+CO2 Gas Shielded Arc Welding "DWA-81Ni1" AWS A5.29-1998
More informationDX2507 DX2507. Duplex stainless steel offer grade. General characteristics. Chemical composition. Material standards
Duplex stainless steel offer grade Chemical composition Elements C Cr Ni Mo N PREN* % weight
More informationHASTELLOY C-2000 alloy
HASTELLOY C-2000 alloy Principal Features A copper-bearing Ni-Cr-Mo material with exceptional resistance to sulfuric acid HASTELLOY C-2000 alloy (UNS N06200) is unique among the versatile nickel-chromium-molybdenum
More informationCreep and High Temperature Failure. Creep and High Temperature Failure. Creep Curve. Outline
Creep and High Temperature Failure Outline Creep and high temperature failure Creep testing Factors affecting creep Stress rupture life time behaviour Creep mechanisms Example Materials for high creep
More informationMMPDS January 2003 CHAPTER 5 TITANIUM
CHAPTER 5 TITANIUM 5.1 GENERAL This chapter contains the engineering properties and related characteristics of titanium and titanium alloys used in aircraft and missile structural applications. General
More information