DRAFTS IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE MHD 02/T-143, 144, 145, 146, 147 & TECHNICAL COMMITTEE: MHD 02 ADDRESSED TO:
|
|
- Diana Gaines
- 6 years ago
- Views:
Transcription
1 DRAFTS IN WIDE CIRCULATION TECHNICAL COMMITTEE: MHD 02 DOCUMENT DESPATCH ADVICE Ref Date MHD 02/T-143, 144, 145, 146, 147 & ADDRESSED TO: 1. All members of Orthopaedic Instruments, Implants and Accessories Sectional Committee, MHD All Members of Medical Equipment and Hospital Planning Division Council(MHDC) 3. All others interested Dear Madam(s)/Sir(s), Please find enclosed the following documents: Doc. No.: MHD 02(0277) /ISO :2007 TITLE: Implants for Surgery Metallic materials Part 1: Wrought stainless steel [Superseding IS 5347(part 2):1993] Doc. No.: MHD 02(0278) /ISO :1999 TITLE: Implants for Surgery Metallic materials Part 2: Unalloyed titanium [Superseding IS 5347(Part 3):1996] Doc. No.: MHD 02(0279) /ISO :1996 TITLE: Implants for Surgery Metallic materials Part 3: Wrought titanium 6-aluminium 4- vanadium alloy[superseding IS 5347(Part 4):1996] Doc. No.: MHD 02(0280) /ISO :2005 TITLE: Implants for Surgery Metallic materials Part 5: Wrought cobalt-chromiumtungsten-nickel alloy[superseding IS 5347(Part 6):1996] Doc. No.: MHD 02(0281) /ISO :1997 TITLE: Implants for Surgery Metallic materials Part 8: Wrought cobalt-nickel-chromiummolybdenum-tungsten-iron alloy[superseding IS 5347(Part 12):1993] Doc. No.: MHD 02(0282) /ISO :2007 TITLE: Implants for Surgery Metallic materials Part 9: Wrought high nitrogen stainless steel[superseding IS 5347(Part 13):1997]
2 Kindly examine these draft standards and forward your views stating any difficulties, which you are likely to experience in your business or profession, if these are finally adopted as National Standard. Last date for comments: Comments if any, may please be made in the format indicated and mailed to the undersigned at the above address. In case no comments are received or comments received are of editorial nature, you will kindly permit us to presume your approval for the above document as finalized. However, in case comments of technical nature are received then it may be finalized either in consultation with the Chairman, Sectional Committee or referred to the Sectional committee for further necessary action if so desired by the Chairman, Sectional Committee. Thanking you, Yours sincerely, Encl: As above (Rakesh Kumar) Scientist F & Head (MHD) 1) anurita@bis.org.in 2) mhd@bis.org.in Telefax:
3 Draft for Comments only Doc: MHD 02(0280) IS/ISO :2005 [superseding IS 5347(Part 6):1996] BUREAU OF INDIAN STANDARDS (Not to be reproduced without permission of BIS or used as standard) Draft Indian Standard Implants for Surgery Metallic materials Part 5: Wrought cobalt-chromium-tungsten-nickel alloy Last date of receipt of comments is Orthopaedic Instruments Implant and Accessories Sectional Committee, MHD 02 NATIONAL FOREWORD (Formal clause of adoption will be added later) This draft Indian Standard ( Part 5 ) is identical with ISO :2015 Implants for Surgery Metallic materials Part 5: Wrought cobalt-chromium-tungsten-nickel alloy issued by the International Organization for Standardization (ISO). This draft Indian Standard was first published in 1984 as IS 5347(Part 6) based on ISO :1978 and subsequently revised in 1996 to incorporate the modifications affected in the second edition of IS brought out in It is now being published as IS/ISO to align with the latest ISO standard brought out in This draft Indian standard will supersede IS 5347(Part 6):1996 Requirements for orthopaedic implants Part 6: Wrought cobalt-chromium-tungsten-nickel alloy(first revision)and after the publication of this Draft Indian Standard, IS 5347(Part 6) shall be treated as withdrawn. No known surgical implant material has ever to be completely free of adverse reactions in the human body. However long-term clinical experience of the use of the material referred to in this draft standard has shown that an acceptable level of biological response can be expected when the material is used in appropriate applications. The text of the ISO standard has been approved as suitable for publication as Indian Standard without deviations. Certain conventions are, however, not identical to those used in the Indian Standards. Attention is particularly drawn to the following: a) Wherever the words International Standard appears referring to this standard, they should be read as Indian Standard. b) Comma (,) has been used as a decimal marker while in Indian Standards, the current practice is to use a point (.) as the decimal marker. International Standard Title
4 ISO 643 ISO 4967:1998 ISO 6892 Steels-Micrographic determination of the apparent grain size Steel-Determination of content of nonmetallic inclusions- Micrographic method using standard diagrams Metallic materials-tensile testing at ambient temperature For the purpose of deciding whether a particular requirement of this standard is complied with, the final value, observed or calculated, expressing the result of a test shall be rounded off in accordance with IS 2:1960 Rules for rounding off numerical values (revised). The number of significant places retained in the rounded off value should be the same as that of the specified value in this standard.
5 FORMAT FOR SENDING COMMENTS ON BIS DOCUMENTS (Please use A4 size sheet of paper only and type within fields indicated. Comments on each clauses/sub-clauses/table/fig. etc be started on a fresh box. Information in Column 4 should include reasons for the comments and suggestions for modified wording of the clauses when the existing text is found not acceptable. Adherence to this format facilitates Secretariat s work) Doc. No.: MHD 02(0280) /ISO :2005 TITLE: Implants for Surgery Metallic materials Part 5: Wrought cobaltchromium-tungsten-nickel alloy LAST DATE OF COMMENTS: NAME OF THE COMMENTATOR/ORGANIZATION: Sl. No. Clause/Subclause/ para/table/fig. No. commented Commentator/ Organization/ Abbreviation Type of Comments (General/Editorial/ Technical) Justification Proposed change
DOCUMENT DESPATCH ADVICE DRAFT IN WIDE CIRCULATION MHR 06 /T- 50/51/52/53/ TECHNICAL COMMITTEE: MHR 06
DRAFT IN WIDE CIRCULATION TECHNICAL COMMITTEE: MHR 06 DOCUMENT DESPATCH ADVICE Ref Date MHR 06 /T- 50/51/52/53/54 09-05-2008 DOC NO: MHR 06 (0114)/ISO 7199:1996 TITLE Cardiovascular implants and artificial
More informationISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Part 12: Wrought cobalt-chromium-molybdenum alloy
INTERNATIONAL STANDARD ISO 5832-12 Second edition 2007-05-01 Implants for surgery Metallic materials Part 12: Wrought cobalt-chromium-molybdenum alloy Implants chirurgicaux Matériaux métalliques Partie
More informationISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Part 9: Wrought high nitrogen stainless steel
INTERNATIONAL STANDARD ISO 5832-9 Second edition 2007-06-15 Implants for surgery Metallic materials Part 9: Wrought high nitrogen stainless steel Implants chirurgicaux Matériaux métalliques Partie 9: Acier
More informationISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Part 12: Wrought cobalt-chromium-molybdenum alloy
INTERNATIONAL STANDARD ISO 5832-12 Second edition 2007-05-01 Implants for surgery Metallic materials Part 12: Wrought cobalt-chromium-molybdenum alloy Implants chirurgicaux Matériaux métalliques Partie
More informationISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Part 1: Wrought stainless steel
INTERNATIONAL STANDARD ISO 5832-1 Fourth edition 2007-06-15 Implants for surgery Metallic materials Part 1: Wrought stainless steel Implants chirurgicaux Matériaux métalliques Partie 1: Acier inoxydable
More informationImplants for surgery Metallic materials
BRITISH STANDARD Implants for surgery Metallic materials BS ISO 5832-12:2007 Incorporating corrigendum September 2008 Part 12: Wrought cobalt-chromiummolybdenum alloy ICS 11.040.40 NO COPYING WITHOUT BSI
More informationImplants for surgery Metallic materials. Part 3: Wrought titanium 6-aluminium 4-vanadium alloy
INTERNATIONAL STANDARD ISO 5832-3 Fourth edition 2016-10-15 Implants for surgery Metallic materials Part 3: Wrought titanium 6-aluminium 4-vanadium alloy Implants chirurgicaux Produits à base de métaux
More informationDOCUMENT DESPATCH ADVICE Ref: ME 28/T-72 Date: Mechanical Vibration and Shock Sectional Committee, MED 28
DRAFT STANDARD IN WIDE CIRCULATION DOCUMENT DESPATCH ADVICE Ref: ME 28/T-72 Date: 10-11-2015 Mechanical Vibration and Shock Sectional Committee, MED 28 TO: a) The interested members of Mechanical Engineering
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7153-1 Third edition 2016-10-01 Surgical instruments Materials Part 1: Metals Instruments chirurgicaux Matériaux Partie 1: Métaux Reference number ISO 7153-1:2016(E) ISO 2016
More informationParagraph/ Figure/Table
Date Document No. 22-07-2014 Doc: ET 15(6749) Sl. No. Name of the Organization Clause/ Subclause Paragraph/ Figure/Table Type of Comment (General/ Technical/ Editorial Comments Proposed Change BUREAU OF
More informationBUREAU OF INDIAN STANDARDS PRODUCTION AND GENERAL ENGINEERING य पक पररच लन म मस द
BUREAU OF INDIAN STANDARDS PRODUCTION AND GENERAL ENGINEERING य पक पररच लन म मस द DRAFTS IN WIDE CIRCULATION रल ख र षण स ञ पन/DOCUMENT DESPATCH ADVICE स द भ /Ref. तकन क सम तत/TECHNICAL COMMITTEE: प ज ड
More informationDoc No.: MHD 12(0333)/ISO :2006 TITLE: Sterilization of health care products Biological indicators Part 1: General requirements
DRAFTS IN WIDE CIRCULATION TECHNICAL COMMITTEE: MHD 12 DOCUMENT DESPATCH ADVICE Ref Date MHD 12/T- 64, 65, 66, 67, 68, 69 & 70 26-03-2014 ADDRESSED TO: 1. All members of Hospital Equipment, Sectional Committee,
More informationBIS or used as Amendment to STANDARD comments is 15 Nov. 2008
Doc: MTD 4 (4730) For comments only BUREAU OF INDIAN STANDARDS Modified draft Indian Standard HOT ROLLED CARBON STEEL SHEET AND STRIP (Sixth Revision of IS 1079) ICS 77.140.50 Not to be reproduced without
More informationInternational Standard Corresponding Indian Standard Degree of Equivalence
BUREAU OF INDIAN STANDARDS DRAFT FOR COMMENTS ONLY Doc: ET 28 (6756) (Not to be reproduced without the permission of BIS or used as a STANDARD) Draft Indian Standard PHOTOVOLTAIC (PV) ARRAYS DESIGN REQUIREMENTS
More informationBUREAU OF INDIAN STANDARDS
Manak Bhavan, 9 Bahadur Shah Zafar Marg New Delhi 110002 व य पक पर च लन स द तकन क सम तत ईट 44 र षत : 1. ईट ड 44 क सभ सदस य 2. व य त तकन क व भ ग पर षद क सभ सदस य तथ 3. च खन ल अन य सभ ननक य रल ख र षण स ञ
More informationHOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES SPECIFICATION (Third Revision of IS 5986)
For Comments Only Draft Indian Standard Doc: MTD 4(4939) HOT ROLLED STEEL FLAT PRODUCTS FOR STRUCTURAL FORMING AND FLANGING PURPOSES SPECIFICATION (Third Revision of IS 5986) ICS 77.140.50 Not to be reproduced
More informationBUREAU OF INDIAN STANDARDS
BUREAU OF INDIAN STANDARDS Manak Bhavan, Doc 9 ETD/42/ Bahadur 11303 Shah Zafar Marg New Delhi 110002 Phones 2323 0131 2323 3375 Extn 4284 TeleFax +91 11 2323 1192 Website : www.bis.org.in email : eetd@bis.org.in
More informationSTI /15392 /1 April, 2009
CENTRAL MARKS DEPARTMENT-III Our Ref : CMD-III/16:15392 30 04 2009 Subject : Finalized STI as per IS 15392 : 2003 Aluminium and Aluminium Alloy Bare Foil Food Packaging The Scheme of Testing and Inspection
More informationISO :1996, Implants For Surgery -- Metallic Materials -- Part 12: Wrought Cobalt-chromiummolybdenum. By ISO TC 150/SC 1 READ ONLINE
ISO 5832-12:1996, Implants For Surgery -- Metallic Materials -- Part 12: Wrought Cobalt-chromiummolybdenum Alloy By ISO TC 150/SC 1 READ ONLINE Method 12, Thickness Of Metallic Buy ISO 5832-12:1996, Implants
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 683-2 Second edition 2016-07-01 Heat-treatable steels, alloy steels and free-cutting steels Part 2: Alloy steels for quenching and tempering Aciers pour traitement thermique,
More informationISO INTERNATIONAL STANDARD. Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices
INTERNATIONAL STANDARD ISO 4126-2 First edition 2003-01-15 Safety devices for protection against excessive pressure Part 2: Bursting disc safety devices Dispositifs de sécurité pour protection contre les
More informationDraft Indian Standard Galvanized Steel Sheets (Plain and Corrugated)- Specification (Seventh Revision of IS 277) ICS
FOR BIS Use Only Doc: No. MTD 4 (5207) Draft Indian Standard Galvanized Steel Sheets (Plain and Corrugated)- Specification (Seventh Revision of IS 277) ICS 77.140.50 Not be reproduced without the permission
More informationISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Classification of microstructures for alpha+beta titanium alloy bars
INTERNATIONAL STANDARD ISO 20160 First edition 2006-05-01 Corrected version 2006-09-15 Implants for surgery Metallic materials Classification of microstructures for alpha+beta titanium alloy bars Implants
More informationAn Introduction to Indian Standards on Ferro Alloys
Ferro Alloy Industries in the Liberalised Economy Editors : A, K. Vaish. S.D. Singly, N.G. Gosxvanti and P. Raniachandrarao NML Jamshedpur 831 007, 1997, pp. 14-22 An Introduction to Indian Standards on
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 683-1 Third edition 2016-07-01 Heat-treatable steels, alloy steels and free-cutting steels Part 1: Non-alloy steels for quenching and tempering Aciers pour traitement thermique,
More informationMedical devices Quality management systems Requirements for regulatory purposes
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 13485 Third edition 2016-03-01 Medical devices Quality management systems Requirements for regulatory purposes Dispositifs médicaux Systèmes de
More informationISO 8872 INTERNATIONAL STANDARD. Aluminium caps for transfusion, infusion and injection bottles General requirements and test methods
INTERNATIONAL STANDARD ISO 8872 Second edition 2003-03-15 Aluminium caps for transfusion, infusion and injection bottles General requirements and test methods Capsules en aluminium pour flacons de transfusion,
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15614-2 First edition 2005-05-15 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 2: Arc welding of aluminium and its
More informationAWS A5.9/A5.9M:2006 An American National Standard. Specification for Bare Stainless Steel Welding Electrodes and Rods
An American National Standard Specification for Bare Stainless Steel Welding Electrodes and Rods second printing, August 2007 Key Words Composite electrodes, metal cored bare stainless steel rods, duplex
More informationBUREAU OF INDIAN STANDARDS Draft Standard Hot dip 55% Aluminium- Zinc Alloy metallic coated steel strip & sheet (plain)
For Comments Only BUREAU OF INDIAN STANDARDS Draft Standard Hot dip 55% Aluminium- Zinc Alloy metallic coated steel strip & sheet (plain) ICS 77.140.50 ---------------------------------------------------------------------------------------------------------------------------------------------------
More informationISO INTERNATIONAL STANDARD. Implants for surgery Ceramic materials Part 1: Ceramic materials based on high purity alumina
INTERNATIONAL STANDARD ISO 6474-1 First edition 2010-02-15 Implants for surgery Ceramic materials Part 1: Ceramic materials based on high purity alumina Implants chirurgicaux Produits céramiques Partie
More informationAustralian/New Zealand Standard
AS/NZS ISO 9001:2008 ISO 9001:2008 (Incorporating Amendment No. 1) AS/NZS ISO 9001:2008 Australian/New Zealand Standard Quality management systems Requirements AS/NZS ISO 9001:2008 This Joint Australian/New
More informationISO INTERNATIONAL STANDARD
- INTERNATIONAL STANDARD ISO 9327-1 First edition 1999-04-15 Steel forgings and rolled or forged bars for pressure purposes Technical delivery conditions Part 1: General requirements Pièces forgées et
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 5643Q Issued OCT 1951 Revised JAN 2003 Superseding AMS 5643P Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution
More informationVoorbeeld. Preview ISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Part 1: Wrought stainless steel
INTERNATIONAL STANDARD ISO 5832-1 Fourth edition 2007-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More information2. TEST RECORDS: All records of tests and analysis shall be kept in suitable forms approved by the Bureau.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF CARBON STEEL BILLETS, BLOOMS, SLABS AND BARS FOR FORGINGS ACCORDING TO IS:1875-1992 (Fifth Revision) 1. LABORATORY: A laboratory shall be maintained
More informationLicensed Copy: John May, Powertrain Ltd., February 20, 2002, Uncontrolled Copy, (c) BSI
BRITISH STANDARD BS 70-3: Incorporating Amendment Nos. 1 and 2 Specification for Wrought steel for mechanical and allied engineering purposes Part 3: Bright bars for general engineering purposes BS70-3:
More informationAustralian Standard. Sampling procedures and charts for inspection by variables for percent nonconforming AS ISO 3951:1989
AS 24901997 ISO 3951:1989 Australian Standard Sampling procedures and charts for inspection by variables for percent nonconforming This Australian Standard was prepared by Committee QR/4, Statistical Quality
More informationVoorbeeld. Preview ISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Part 9: Wrought high nitrogen stainless steel
INTERNATIONAL STANDARD ISO 5832-9 Second edition 2007-06-15 Dit document mag slechts op een stand-alone PC worden geinstalleerd. Gebruik op een netwerk is alleen. toestaan als een aanvullende licentieovereenkomst
More informationISO INTERNATIONAL STANDARD. Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques Règles générales
INTERNATIONAL STANDARD ISO 15607 First edition 2003-12-15 Specification and qualification of welding procedures for metallic materials General rules Descriptif et qualification d'un mode opératoire de
More informationAS/NZS ISO 9004:2011 Managing for the sustained success of an organization A quality management approach
AS/NZS ISO 9004:2011 Managing for the sustained success of an organization A quality management approach AS/NZS ISO 9004:2011 This Joint Australian/New Zealand Standard was prepared by Joint Technical
More informationBUREAU OF INDIAN STANDARDS (Central Marks Department - III) Our Ref : CMD-III/16: Oct 2006
BUREAU OF INDIAN STANDARDS (Central Marks Department - III) Our Ref : CMD-III/16:8156 18 Oct 2006 Subject : SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF FASTENERS FOR CONSUMER GOODS SYNTHETIC
More informationAustralian Standard. Guidelines for the selection of quality management system consultants and use of their services AS ISO ISO 10019:2005
AS ISO 10019 2005 ISO 10019:2005 AS ISO 10019 2005 Australian Standard Guidelines for the selection of quality management system consultants and use of their services This Australian Standard was prepared
More informationISO INTERNATIONAL STANDARD. Implants for surgery Hydroxyapatite Part 1: Ceramic hydroxyapatite
INTERNATIONAL STANDARD ISO 13779-1 Second edition 2008-10-01 Implants for surgery Hydroxyapatite Part 1: Ceramic hydroxyapatite Implants chirurgicaux Hydroxyapatite Partie 1: Céramique à base d'hydroxyapatite
More information1 Doc WRD 13 ( 594 ) GUIDELINES FOR DESGIN ANDS CONSTRUCTION OF WATER COURSES
DRFT STNDRD IN WIDE CIRCULTION SPEED POST Document Dispatch dvice Ref. Date WRD 13/T-53 DEC 2013 TECHNICL COMMITTEE: Canals & Cross Drainage Works Sectional Committee, WRD 13 ------------------------------------------------------------------------------------------------------------------------
More informationDRAFT UGANDA STANDARD
DRAFT UGANDA STANDARD DUS 1659 First Edition 2016-11-09 Materials in Contact with Food Requirements for Packaging materials Reference number DUS 1659: 2016 UNBS 2016 DUS 1659: 2016 Compliance with this
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 17945 First edition 2015-04-15 Petroleum, petrochemical and natural gas industries Metallic materials resistant to sulfide stress cracking in corrosive petroleum refining environments
More informationISO INTERNATIONAL STANDARD. Building construction Jointing products Specifications for test substrates
INTERNATIONAL STANDARD ISO 13640 First edition 1999-12-15 Building construction Jointing products Specifications for test substrates Construction immobilière Matériaux pour joints Prescriptions relatives
More informationAustralian Standard. Medical refrigeration equipment For the storage of blood and blood products AS
AS 3864 1997 Australian Standard Medical refrigeration equipment For the storage of blood and blood products This Australian Standard was prepared by Committee HT/10, Medical Refrigeration. It was approved
More informationAS AS Australian Standard. Wear-resistant white cast iron. This is a free 6 page sample. Access the full version online.
AS 2027 2002 AS 2027 Australian Standard Wear-resistant white cast iron This Australian Standard was prepared by Committee MT-001, Iron and Steel. It was approved on behalf of the Council of Standards
More informationDRAFT PRODUCT CERTIFICATION MANUAL FOR COMMENTS. Our Ref.CRO 22 / FRBO 20 Jan 2014
DRAFT PRODUCT CERTIFICATION MANUAL FOR COMMENTS Our Ref.CRO 22 / FRBO 20 Jan 2014 Please find enclosed the following draft certification manual : PRODUCT MANUAL ON ROTATIONAL MOULDED POLYETHYLENE WATER
More informationImplants for surgery Orthopaedic joint prosthesis. Part 1: Procedure for producing parametric 3D bone models from CT data of the knee
INTERNATIONAL STANDARD ISO 19233-1 First edition 2017-05 Implants for surgery Orthopaedic joint prosthesis Part 1: Procedure for producing parametric 3D bone models from CT data of the knee Implants chirugicaux
More informationGB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF
Translated English of Chinese Standard: GB/T13810-2007 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 77.150.50 H 64 GB/T 13810-2007 Replacing
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 898-5 Second edition 1998-08-01 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners not under tensile stresses
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-18716-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 17.11.2014 to 13.05.2018 Holder of certificate: Institut
More informationSpecification ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH All.steel f.quen.a.temp, h.str.
Class: Heat-treatable steel Specification 16-09 ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH Class No.:11 JED 723 Previous Edition Abbreviated Title 15-07 All.steel f.quen.a.temp, h.str. 8
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationISO 185 INTERNATIONAL STANDARD. Grey cast irons Classification. Fontes à graphite lamellaire Classification. Second edition
INTERNATIONAL STANDARD ISO 185 Second edition 2005-08-15 Grey cast irons Classification Fontes à graphite lamellaire Classification Reference number ISO 185:2005(E) ISO 2005 PDF disclaimer This PDF file
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION Licensed to Juan Rodriguez AMS 5754M Issued MAY 1954 Revised AUG 2007 Superseding AMS 5754L Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni
More informationRELIABLE PIPES & TUBES LTD.
RELIABLE PIPES & TUBES LTD. OHSAS 800:2007 CERTIFIED ISO 900:2008 CERTIFIED ISO 400:2004 CERTIFIED PED CERT NO 0 202 IND/Q--00 GOVT. RECOGNIZED EXPORT HOUSE Manufacturer & Exporters of Monel, Inconel,
More informationISO INTERNATIONAL STANDARD. Cutting tools Designation of high-speed steel groups. Outils coupants Désignation des groupes d'aciers rapides
INTERNATIONAL STANDARD ISO 11054 Second edition 2006-01-15 Cutting tools Designation of high-speed steel groups Outils coupants Désignation des groupes d'aciers rapides Reference number ISO 11054:2006(E)
More informationBUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III
BUREAU OF INDIAN STANDARDS CENTRAL MARKS DEPARTMENT-III Our Ref: CMD-III/16:814 31 January 2006 Subject: Implementation of Amendment No 1 to IS 814:2004 for Covered Electrodes For Manual Metal Arc Welding
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15613 First edition 2004-06-15 Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test Descriptif et qualification
More informationSCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED STEEL BARBED WIRE FOR FENCING ACCORDING ACCORDING TO IS 278:2009 (Fourth Revision)
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF GALVANIZED STEEL BARBED WIRE FOR FENCING ACCORDING ACCORDING TO (Fourth Revision) DOC: STI/278/, 1 LABORATORY - A laboratory shall be maintained which
More informationASTM B564-06a Standard Specification for Nickel Alloy Forgings1
Standard Specification for Nickel Forgings1 1. Scope* :- 1.1 This specification2 covers forgings of nickel N02200, Ni-Cu N04400, Ni-Cr-Fe s N06600, N06603, and N06690, Ni-Cr-Mo-Nb N06625, Ni-Cr-Mo-Si N06219,
More informationISO 8339 INTERNATIONAL STANDARD. Building construction Sealants Determination of tensile properties (Extension to break)
INTERNATIONAL STANDARD ISO 8339 Second edition 2005-06-15 Building construction Sealants Determination of tensile properties (Extension to break) Construction immobilière Mastics Détermination des propriétés
More informationMolybdenum. Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Designation: A 387/A 387M 03
Designation: A 387/A 387M 03 Used in USDOE-NE Standards Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Molybdenum 1 This standard is issued under the fixed designation A 387/A
More informationISO 1456 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 1456 Fourth edition 2009-08-01 Metallic and other inorganic coatings Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus
More informationISO INTERNATIONAL STANDARD. Hot-rolled stainless steel plates Tolerances on dimensions and shape
INTERNATIONAL STANDARD ISO 18286 Second edition 2008-12-15 Hot-rolled stainless steel plates Tolerances on dimensions and shape Tôles en acier inoxydable laminées à chaud Tolérances sur les dimensions
More informationSPECIFICATION FOR Aluminium alloy windows
SINGAPORE STANDARD SS 212 : 2007 (ICS 91.060.50) SPECIFICATION FOR Aluminium alloy windows Published by SPRING Singapore 2 Bukit Merah Central Singapore 159835 SPRING Singapore Website: www.spring.gov.sg
More informationElectron Beam Melted (EBM) Co-Cr-Mo Alloy for Orthopaedic Implant Applications Abstract Introduction The Electron Beam Melting Process
Electron Beam Melted (EBM) Co-Cr-Mo Alloy for Orthopaedic Implant Applications R.S. Kircher, A.M. Christensen, K.W. Wurth Medical Modeling, Inc., Golden, CO 80401 Abstract The Electron Beam Melting (EBM)
More informationISO 5178 INTERNATIONAL STANDARD. Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints
INTERNATIONAL STANDARD ISO 5178 First edition 2001-02-01 Destructive tests on welds in metallic materials Longitudinal tensile test on weld metal in fusion welded joints Essais destructifs des soudures
More informationISO/TS TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ISO/TS 10993-19 First edition 2006-06-01 Biological evaluation of medical devices Part 19: Physico-chemical, morphological and topographical characterization of materials Évaluation
More informationISO INTERNATIONAL STANDARD. Implants for surgery Active implantable medical devices Part 4: Implantable infusion pumps
INTERNATIONAL STANDARD ISO 14708-4 First edition 2008-11-15 Implants for surgery Active implantable medical devices Part 4: Implantable infusion pumps Implants chirurgicaux Dispositifs médicaux implantables
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 11600 Second edition 2002-10-01 Corrected version 2004-09-01 Building construction Jointing products Classification and requirements for sealants Construction immobilière Produits
More informationSUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
More informationAustralian Standard. Certification of welders and welding supervisors. AS (Incorporating Amendment No. 1) AS 1796
AS 1796 2001 (Incorporating Amendment No. 1) AS 1796 Australian Standard Certification of welders and welding supervisors This Australian Standard was prepared by Committee ME-001, Pressure Equipment.
More informationDisclosure to Promote the Right To Information
इ टरन ट म नक Disclosure to Promote the Right To Information Whereas the Parliament of India has set out to provide a practical regime of right to information for citizens to secure access to information
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15610 First edition 2003-10-01 Specification and qualification of welding procedures for metallic materials Qualification based on tested welding consumables Descriptif et qualification
More informationISO/TS TECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ISO/TS 29001 Third edition 2010-06-01 Petroleum, petrochemical and natural gas industries Sector-specific quality management systems Requirements for product and service supply
More informationStandard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements 1
Designation: A 304 04 An American National Standard Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements 1 This standard is issued under the fixed designation
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 19598 First edition 2016-11-15 Metallic coatings Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)- free treatment Revêtements métalliques
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15761 First edition 2002-12-15 Steel gate, globe and check valves for sizes DN 100 and smaller, for the petroleum and natural gas industries Robinets-vannes, robinets à soupape
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 15590-2 First edition 2003-12-15 Petroleum and natural gas industries Induction bends, fittings and flanges for pipeline transportation systems Part 2: Fittings Industries du
More informationISO INTERNATIONAL STANDARD. Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron
INTERNATIONAL STANDARD ISO 15726 First edition 2009-02-01 Metallic and other inorganic coatings Electrodeposited zinc alloys with nickel, cobalt or iron Revêtements métalliques et autres revêtements inorganiques
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 15614-8 Second edition 2016-03-01 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 8: Welding of tubes to tube-plate joints
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 12944-5 Third edition 2018-02 Paints and varnishes Corrosion protection of steel structures by protective paint systems Part 5: Protective paint systems Peintures et vernis Anticorrosion
More informationISO 5817:2003, Welding - Fusion-welded Joints In Steel, Nickel, Titanium And Their Alloys (beam Welding Excluded) - Quality Levels For Imperfections
ISO 5817:2003, Welding - Fusion-welded Joints In Steel, Nickel, Titanium And Their Alloys (beam Welding Excluded) - Quality Levels For Imperfections By ISO/TC 44/SC 10 If searched for a book ISO 5817:2003,
More informationISO 648 INTERNATIONAL STANDARD. Laboratory glassware Single-volume pipettes. Verrerie de laboratoire Pipettes à un volume. Second edition
INTERNATIONAL STANDARD ISO 648 Second edition 2008-10-15 Laboratory glassware Single-volume pipettes Verrerie de laboratoire Pipettes à un volume Reference number ISO 648:2008(E) ISO 2008 PDF disclaimer
More informationInformation technology Security techniques Information security management systems Requirements
INTERNATIONAL STANDARD ISO/IEC 27001 Second edition 2013-10-01 Information technology Security techniques Information security management systems Requirements Technologies de l information Techniques de
More information1.1 All testing apparatus shall be periodically checked and calibrated. Records of such checks/calibration shall be maintained.
SCHEME OF TESTING AND INSPECTION FOR CERTIFICATION OF SINGLE PHASE a.c. INDUCTION MOTORS FOR GENERAL PURPOSE ACCORDING TO IS 996:2009 (Including Amendment No.1) 1. LABORATORY A laboratory shall be maintained
More informationAS/NZS ISO 9001:2016. Quality management systems Requirements AS/NZS ISO 9001:2016. Australian/New Zealand Standard. Superseding AS/NZS ISO 9001:2008
AS/NZS ISO 9001:2016 (ISO 9001:2015, IDT) Australian/New Zealand Standard Quality management systems Requirements Superseding AS/NZS ISO 9001:2008 AS/NZS ISO 9001:2016 AS/NZS ISO 9001:2016 This joint Australian/New
More informationDOC NO: MHD 22 (187) TITLE: Draft Indian Standard for Reverse Osmosis based POU water purifiers for house hold purpose- Specification
DRAFT IN WIDE CIRCULATION TECHNICAL COMMITTEE: MHD 22 DOCUMENT DESPATCH ADVICE Ref Date MHD 22 /T-02 13-12-2011 ADDRESSED TO: 1. All members of Water Purification System Sectional Committee, MHD 22 2.
More informationISO INTERNATIONAL STANDARD. Heat-treated steels, alloy steels and free-cutting steels Part 17: Ball and roller bearing steels
INTERNATIONAL STANDARD ISO 683-17 Second edition 1999-10-15 Heat-treated steels, alloy steels and free-cutting steels Part 17: Ball and roller bearing steels Aciers pour traitement thermique, aciers alliés
More informationDel 1: Koboltbaserade Iegeringar (ISO :1994) (ISO :1994)
Dental base metal casting alloys - Tandvård - Basmetallegeringar - Part 1: Cobalt-based alloys Del 1: Koboltbaserade Iegeringar (ISO 6871-1:1994) (ISO 6871-1:1994) The European Standard EN ISO 6871-1:1996
More informationDEUTSCHE NORM December 2000
DEUTSCHE NORM December 2000 Tape and shrinkable materials for the corrosion protection of buried or underwater pipelines without cathodic protection for use at operating temperatures up to 50 C { 30672
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 21610 First edition 2009-12-15 Corrosion of metals and alloys Accelerated corrosion test for intergranular corrosion susceptibility of austenitic stainless steels Corrosion des
More informationCENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:
CENTRAL MARKS DEPARTMENT (FCT) Ref: CMD-II/16:15489 20 03 2014 Subject: Implementation of revised STI for IS 15489 :2013 for Paint Plastic Emulsion - Specification 1. Indian Standard Specification for
More informationISO/IEC TR TECHNICAL REPORT
TECHNICAL REPORT ISO/IEC TR 20000-3 First edition 2009-11-01 Information technology Service management Part 3: Guidance on scope definition and applicability of ISO/IEC 20000-1 Technologies de l'information
More informationThis document is a preview generated by EVS
TECHNICAL REPORT ISO/IEC TR 33014 First edition 2013-12-01 Information technology Process assessment Guide for process improvement Technologies de l'information Évaluation des procédés Guide de l'amélioration
More information