vpolytan TM Polymer Surface Mount Chip Capacitors, Low ESR, Leadframeless Molded Type

Size: px
Start display at page:

Download "vpolytan TM Polymer Surface Mount Chip Capacitors, Low ESR, Leadframeless Molded Type"

Transcription

1 vpolytan TM Polymer Surface Mount Chip Capacitors, Low ESR, Leadframeless Molded Type T59 PERFORMANCE / ELECTRICAL CHARACTERISTICS Operating Temperature: -55 C to +105 C Capacitance Range: 15 μf to 470 μf Capacitance Tolerance: ± 10 %, ± 20 % standard Voltage Rating: 16 V DC to 75 V DC FEATURES Ultra-low ESR 100 % surge current tested Available Molded case 7343 EIA size Terminations: wraparound Available 12 mm tape and 7" (178 mm) reel packaging per EIA-481 standard Available Material categorization: for definitions of compliance please see Available Note * This datasheet provides information about parts that are RoHS-compliant and / or parts that are non RoHS-compliant. For example, parts with lead (Pb) terminations are not RoHS-compliant. Please see the information / tables in this datasheet for details APPLICATIONS Decoupling, smoothing, filtering Bulk energy storage in Solid State Drives (SSD) Infrastructure equipment Storage and networking Computer motherboards Smartphones and tablets ORDERING INFORMATION T59 EE 337 M 016 C 0025 TYPE CASE CODE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING TERMINATION / PACKAGING ESR See Ratings and Case Codes table. This is expressed in picofarads. The first two digits are the significant figures. The third is the number of zeros to follow. K = ± 10 % M = ± 20 % This is expressed in volts. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an R (6R3 = 6.3 V) E = Sn / Pb solder C = 100 % tin Maximum 100 khz ESR in m DIMENSIONS in inches [millimeters] Anode termination Anode polarity bar Cathode termination W H P1 P2 P1 L CASE CODE EIA SIZE H (MAX.) L W P1 P2 (REF.) EE [4.3] ± [7.3 ± 0.3] ± [4.3 ± 0.3] ± [1.3 ± 0.3] [4.85] Revision: 11-Apr-18 1 Document Number: 40191

2 T59 RATINGS AND CASE CODES (ESR m ) μf 16 V 30 V 35 V 50 V 63 V 75 V 15 EE (100) EE (100) (1) 22 EE (75) EE (75) EE (100) (1) 47 EE (70, 55) 150 EE (150, 75) 220 EE (25) 330 EE (25) 470 EE (25, 20) Note (1) Rating in development, contact factory for availability MARKING Family Capacitance T V Polarity mark logo Voltage STANDARD RATINGS CAPACITANCE (μf) CASE CODE PART NUMBER MAX. DCL AT +25 C (μa) MAX. DF AT +25 C 120 Hz (%) MAX. ESR AT +25 C 100 khz (m ) MAX. RIPPLE, 100 khz I RMS (A) HI TEMPERATURE LOAD TEMPERATURE ( C) 16 V DC AT +105 C 220 EE T59EE227(1)016(2) EE T59EE337M016(2) EE T59EE477M016(2) EE T59EE477M016(2) V DC AT +105 C 150 EE T59EE157M030(2) EE T59EE157M030(2) V DC AT +105 C 47 EE T59EE476M035(2) EE T59EE476M035(2) V DC AT +105 C 22 EE T59EE226M050(2) V DC AT +105 C 15 EE T59EE156M063(2) EE T59EE226M063(2) V DC AT +105 C 15 EE (1) T59EE156M075(2) EE (1) T59EE226M075(2) Notes Part number definitions: (1) Capacitance tolerance: K, M (2) Termination and packaging: E, C (1) Rating in development, contact factory for availability TIME (h) MSL Revision: 11-Apr-18 2 Document Number: 40191

3 T59 RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below +105 C) CAPACITOR VOLTAGE RATING OPERATING VOLTAGE CAPACITANCE VS. FREQUENCY IMPEDANCE AND ESR VS. FREQUENCY T59EE337M016E T59EE337M016E Capacitance (µf) 1000 Capacitance st line Impedance / ESR Impedance ESR st line Frequency (Hz) 2nd line Frequency (Hz) 2nd line 10 POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT +25 C (W) IN FREE AIR EE STANDARD PACKAGING QUANTITY CASE CODE UNITS PER 7" REEL EE 400 Revision: 11-Apr-18 3 Document Number: 40191

4 T59 PERFORMANCE CHARACTERISTICS ITEM CONDITION POST TEST PERFORMANCE Life test at +105 C Shelf life test at +105 C 2000 h application of rated voltage at 105 C, MIL-STD-202 method h no voltage applied at 105 C, MIL-STD-202 method 108 Capacitance change Leakage current Capacitance change Leakage current Within ± 20 % of initial value Within initial limits Shall not exceed 300 % of initial limit Within ± 20 % of initial value Within initial limits Shall not exceed 300 % of initial limit Humidity tests At 60 C / 90 % RH 500 h, no voltage applied Capacitance change -20 % to +40 % of initial value Stability at low and high temperatures Surge voltage Shock (specified pulse) Vibration Shear test Within initial limit Leakage current Shall not exceed 300 % of initial limit -55 C Capacitance change Within -20 % to 0 % of initial value Shall not exceed 150 % of initial limit Leakage current n/a 25 C Capacitance change Within ± 20 % of initial value Within initial limit Leakage current Within initial limit 85 C Capacitance change Within -0 % to +50 % of initial value Within initial limit Leakage current Shall not exceed 1000 % of initial value 105 C Capacitance change Within -0 % to +50 % of initial value Within initial limits Leakage current Shall not exceed 1000 % of initial limits 85 C, 1000 successive test cycles at 1.3 of rated voltage in series with a 33 resistor at the rate of 30 s ON, 30 s OFF MIL-STD-202, method 213, condition I, 100 g peak MIL-STD-202, method 204, condition D, 10 Hz to 2000 Hz 20 g peak Apply a pressure load of 5 N for 10 s ± 1 s horizontally to the center of capacitor side body Capacitance change Leakage current Capacitance change Leakage current Within ± 20 % of initial value Within initial limit Shall not exceed 300 % of initial limit Within ± 20 % of initial value Within initial limit Shall not exceed 300 % of initial limit There shall be no mechanical or visual damage to capacitors post-conditioning. Capacitance change Leakage current Within ± 20 % of initial value Within initial limit Shall not exceed 300 % of initial limit There shall be no mechanical or visual damage to capacitors post-conditioning. Capacitance change Leakage current Within ± 20 % of initial value Within initial limit Shall not exceed 300 % of initial limit PRODUCT INFORMATION Moisture Sensitivity Infographic Sample Board FAQ Frequently Asked Questions Revision: 11-Apr-18 4 Document Number: 40191

5 Guide for Tantalum Solid Electrolyte Chip Capacitors with Polymer Cathode INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability, and long service life are primary considerations. The stability and resistance to elevated temperatures of the tantalum/tantalum oxide/manganese dioxide system make solid tantalum capacitors an appropriate choice for today's surface mount assembly technology. Sprague has been a pioneer and leader in this field, producing a large variety of tantalum capacitor types for consumer, industrial, automotive, military, and aerospace electronic applications. Tantalum is not found in its pure state. Rather, it is commonly found in a number of oxide minerals, often in combination with Columbium ore. This combination is known as tantalite when its contents are more than one-half tantalum. Important sources of tantalite include Australia, Brazil, Canada, China, and several African countries. Synthetic tantalite concentrates produced from tin slags in Thailand, Malaysia, and Brazil are also a significant raw material for tantalum production. Electronic applications, and particularly capacitors, consume the largest share of world tantalum production. Other important applications for tantalum include cutting tools (tantalum carbide), high temperature super alloys, chemical processing equipment, medical implants, and military ordnance. Sprague is a major user of tantalum materials in the form of powder and wire for capacitor elements and rod and sheet for high temperature vacuum processing. THE BASICS OF TANTALUM CAPACITORS Most metals form crystalline oxides which are non-protecting, such as rust on iron or black oxide on copper. A few metals form dense, stable, tightly adhering, electrically insulating oxides. These are the so-called valve metals and include titanium, zirconium, niobium, tantalum, hafnium, and aluminum. Only a few of these permit the accurate control of oxide thickness by electrochemical means. Of these, the most valuable for the electronics industry are aluminum and tantalum. Capacitors are basic to all kinds of electrical equipment, from radios and television sets to missile controls and automobile ignitions. Their function is to store an electrical charge for later use. Capacitors consist of two conducting surfaces, usually metal plates, whose function is to conduct electricity. They are separated by an insulating material or dielectric. The dielectric used in all tantalum electrolytic capacitors is tantalum pentoxide. Tantalum pentoxide compound possesses high-dielectric strength and a high-dielectric constant. As capacitors are being manufactured, a film of tantalum pentoxide is applied to their electrodes by means of an electrolytic process. The film is applied in various thicknesses and at various voltages and although transparent to begin with, it takes on different colors as light refracts through it. This coloring occurs on the tantalum electrodes of all types of tantalum capacitors. Rating for rating, tantalum capacitors tend to have as much as three times better capacitance/volume efficiency than aluminum electrolytic capacitors. An approximation of the capacitance/volume efficiency of other types of capacitors may be inferred from the following table, which shows the dielectric constant ranges of the various materials used in each type. Note that tantalum pentoxide has a dielectric constant of 26, some three times greater than that of aluminum oxide. This, in addition to the fact that extremely thin films can be deposited during the electrolytic process mentioned earlier, makes the tantalum capacitor extremely efficient with respect to the number of microfarads available per unit volume. The capacitance of any capacitor is determined by the surface area of the two conducting plates, the distance between the plates, and the dielectric constant of the insulating material between the plates. COMPARISON OF CAPACITOR DIELECTRIC CONSTANTS DIELECTRIC e DIELECTRIC CONSTANT Air or vacuum 1.0 Paper 2.0 to 6.0 Plastic 2.1 to 6.0 Mineral oil 2.2 to 2.3 Silicone oil 2.7 to 2.8 Quartz 3.8 to 4.4 Glass 4.8 to 8.0 Porcelain 5.1 to 5.9 Mica 5.4 to 8.7 Aluminum oxide 8.4 Tantalum pentoxide 26 Ceramic 12 to 400K In the tantalum electrolytic capacitor, the distance between the plates is very small since it is only the thickness of the tantalum pentoxide film. As the dielectric constant of the tantalum pentoxide is high, the capacitance of a tantalum capacitor is high if the area of the plates is large: where ea C = t C = capacitance e = dielectric constant A = surface area of the dielectric t = thickness of the dielectric Tantalum capacitors contain either liquid or solid electrolytes. In solid electrolyte capacitors, a dry material (manganese dioxide) forms the cathode plate. A tantalum lead is embedded in or welded to the pellet, which is in turn connected to a termination or lead wire. The drawings show the construction details of the surface mount types of tantalum capacitors shown in this catalog. Revision: 16-Jan-18 1 Document Number: 40076

6 SOLID ELECTROLYTE POLYMER TANTALUM CAPACITORS Solid electrolyte polymer capacitors utilize sintered tantalum pellets as anodes. Tantalum pentoxide dielectric layer is formed on the entire surface of anode, which is further impregnated with highly conductive polymer as cathode system. The conductive polymer layer is then coated with graphite, followed by a layer of metallic silver, which provides a conductive surface between the capacitor element and the outer termination (lead frame or other). Molded chip polymer tantalum capacitor encases the element in plastic resins, such as epoxy materials. After assembly, the capacitors are tested and inspected to assure long life and reliability. It offers excellent reliability and high stability for variety of applications in electronic devices. Usage of conductive polymer cathode system provides very low equivalent series resistance (ESR), which makes the capacitors particularly suitable for high frequency applications. TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T55 Epoxy encapsulation Silver adhesive Solderable cathode termination Anode polarity bar Polymer / carbon / silver coating Sintered tantalum pellet Solderable anode termination Lead frame welded to Ta wire TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T58 Rating / marking Side cathode termination (-) Encapsulation Silver adhesive epoxy Anode polarity bar Bottom cathode termination (-) Copper pad Glass reinforced epoxy resin substrate Polymer / carbon / silver coating Sintered tantalum pellet Anode wire Side anode termination (+) Conductive strip Bottom anode termination (+) Revision: 16-Jan-18 2 Document Number: 40076

7 TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T52 T52 E5 / E1 cases Encapsulation Side cathode termination (-) Anode polarity marking Silver adhesive epoxy Bottom cathode termination (-) Silver plated copper substrate Sintered tantalum pellet Polymer / carbon / silver coating Conductive strip Side anode termination (+) Insulation adhesive epoxy T52 M1 case Encapsulation Side cathode termination (-) Polarity bar marking Silver adhesive epoxy Bottom cathode termination (-) Silver plated copper substrate Sintered tantalum pellet Side anode termination (+) Polymer / carbon / silver coating Bottom anode termination (+) Insulation adhesive epoxy TANTALUM CAPACITOR WITH POLYMER CATHODE TYPE T54 / T59 Top / bottom cathode termination (-) Encapsulation Side cathode termination (-) Anode polarity marking Silver plated copper lead frame Top / bottom anode termination (+) Silver adhesive epoxy Sintered tantalum pellet Conductive strip Side anode termination (+) Top / bottom cathode termination (-) Polymer / carbon / silver coating Insulation / adhesive epoxy Top / bottom anode termination (+) Revision: 16-Jan-18 3 Document Number: 40076

8 POLYMER CAPACITORS - MOLDED CASE SERIES T55 PRODUCT IMAGE TYPE VPolyTan TM, molded case, high performance polymer FEATURES High performance TEMPERATURE RANGE -55 C to +105 C CAPACITANCE RANGE 3.3 μf to 1000 μf VOLTAGE RANGE 2.5 V to 63 V CAPACITANCE TOLERANCE ± 20 % LEAKAGE CURRENT 0.1 CV DISSIPATION FACTOR 8 % to 10 % ESR 12 m to 500 m CASE SIZES J, P, A, T, B, Z, V, D Cases J, P: 100 % tin TERMINATION FINISH Case A: 100 % tin or Ni / Pd / Au Cases T, B, Z, V, D: Ni / Pd / Au POLYMER CAPACITORS - LEADFRAMELESS MOLDED CASE SERIES T52 T58 T59 T54 PRODUCT IMAGE TYPE vpolytan TM polymer surface mount chip capacitors, low profile, leadframeless molded type vpolytan TM polymer surface mount chip capacitors, compact, leadframeless molded type vpolytan TM polymer surface mount chip capacitors, low ESR, leadframeless molded type vpolytan TM polymer surface mount chip capacitors, low ESR, leadframeless molded type, hi-rel commercial off-the-shelf (COTS) FEATURES Low profile Small case size Multianode Hi-rel COTS, multianode TEMPERATURE RANGE -55 C to +105 C -55 C to +105 C -55 C to +105 C -55 C to +105 C CAPACITANCE RANGE 47 μf to 1500 μf 1 μf to 330 μf 15 μf to 470 μf 15 μf to 470 μf VOLTAGE RANGE 6.3 V to 35 V 6.3 V to 35 V 16 V to 75 V 16 V to 75 V CAPACITANCE TOLERANCE ± 20 % ± 20 % ± 10 %, ± 20 % ± 20 % LEAKAGE CURRENT 0.1 CV DISSIPATION FACTOR 10 % 8 % to 14 % 10 % 10 % ESR 25 m to 55 m 50 m to 500 m 25 m to 150 m 25 m to 150 m CASE SIZES E1, E5, M1 MM, M0, W0, W9, A0, AA, B0, BB EE EE TERMINATION 100 % tin 100 % tin / lead Revision: 16-Jan-18 4 Document Number: 40076

9 MOLDED CAPACITORS, T55 TYPE PLASTIC TAPE AND REEL PACKAGING DIMENSIONS in millimeters Label C B A E D TAPE WIDTH 8 12 A + 0 / - 3 Ø 180 B + 1 / 0 Ø 60 C ± 0.2 Ø 13 D ± 0.5 Ø 21 E ± W ± Note A reel diameter of 330 mm is also applicable W PLASTIC TAPE SIZE DIMENSIONS in millimeters Perforation Ø Pocket A F W B E t Direction of tape flow P ± ± 0.1 Inserting direction Perforation Marking side (upper) Symbol: R Mounting terminal side (lower) CASE CODE A ± 0.2 B ± 0.2 W ± 0.3 F ± 0.1 E ± 0.1 P 1 ± 0.1 t max. J P A T B Z V D Note A reel diameter of 330 mm is also applicable Revision: 16-Jan-18 5 Document Number: 40076

10 LEADFRAMELESS MOLDED CAPACITORS, ALL TYPES PLASTIC TAPE AND REEL PACKAGING in inches [millimeters] B 1 (max.) (6) Tape thickness [0.35] max. K 0 For tape feeder [0.10] reference only max. including draft. (5) Concentric around B 0 Top cover tape Deformation between embossments Top cover tape [ ] Center lines of cavity A ± [4.0 ± 0.10] B 0 P 1 USER DIRECTION OF FEED 10 pitches cumulative tolerance on tape ± [0.200] ± [2.0 ± 0.05] Embossment ± [1.75 ± 0.10] [0.75] min. (3) [0.75] min. (4) F D 1 (min.) for components x [2.0 x 1.2] and larger. (5) Maximum cavity size (1) W 20 Maximum component rotation (Side or front sectional view) Cathode (-) Anode (+) DIRECTION OF FEED B 0 20 maximum component rotation Typical component cavity center line A 0 (Top view) Typical component center line [100.0] [1.0] max. Tape [1.0] max [250.0] Camber (Top view) Allowable camber to be 0.039/3.937 [1/100] Non-cumulative over [250.0] Tape and Reel Specifications: all case sizes are available on plastic embossed tape per EIA-481. Standard reel diameter is 7" [178 mm]. Notes Metric dimensions will govern. Dimensions in inches are rounded and for reference only. (1) A 0, B 0, K 0, are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the cavity (A 0, B 0, K 0 ) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent rotation of the component within the cavity of not more than 20. (2) Tape with components shall pass around radius R without damage. The minimum trailer length may require additional length to provide R minimum for 12 mm embossed tape for reels with hub diameters approaching N minimum. (3) This dimension is the flat area from the edge of the sprocket hole to either outward deformation of the carrier tape between the embossed cavities or to the edge of the cavity whichever is less. (4) This dimension is the flat area from the edge of the carrier tape opposite the sprocket holes to either the outward deformation of the carrier tape between the embossed cavity or to the edge of the cavity whichever is less. (5) The embossed hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location shall be applied independent of each other. (6) B 1 dimension is a reference dimension tape feeder clearance only. Revision: 16-Jan-18 6 Document Number: 40076

11 CARRIER TAPE DIMENSIONS in inches [millimeters] CASE CODE TAPE SIZE B 1 (MAX.) (1) D 1 (MIN.) F K 0 (MAX.) P 1 W E1 E5 TBD TBD MM (2) 8 mm [1.91] 0.02 [0.5] [3.5] [1.10] [4.0] [8.0] M1 12 mm 0.32 [8.2] [1.5] ± [5.5 ± 0.05] [2.39] ± 0.04 [8.0 ± 1.0] / [ / ] W9 8 mm [3.20] [0.75] [3.5] [1.15] [4.0] [8.0] W0 8 mm [3.20] [0.75] [3.5] [1.15] [4.0] [8.0] A0 8 mm [0.5] [3.5] [1.25] [4.0] [8.0] AA 8 mm [3.90] [1.0] [3.5] [2.00] [4.0] [8.0] B0 12 mm [4.61] [1.5] [5.5] [1.25] [4.0] [8.0] BB 8 mm [4.0] [1.0] [3.5] [2.22] [4.0] [8.0] EE 12 mm 0.32 [8.2] [1.5] ± [5.5 ± 0.05] [4.44] ± 0.04 [8.0 ±1.0] / [ / ] Notes (1) For reference only. (2) Standard packaging of MM case is with paper tape. Plastic tape is available per request. PAPER TAPE AND REEL PACKAGING DIMENSIONS in inches [millimeters] T Ø D 0 P 2 [10 pitches cumulative tolerance on tape ± 0.2 mm] P 0 E 1 A 0 F Bottom cover tape Top cover tape B 0 E2 W Cavity center lines P 1 Anode Cavity size (1) G Bottom cover tape USER FEED DIRECTION CASE SIZE TAPE SIZE MM 8 mm M0 8 mm A 0 B 0 D 0 P 0 P 1 P 2 E F W T ± [1.05 ± 0.05] ± [1.25 ± 0.05] ± [1.8 ± 0.05] ± [2.05 ± 0.05] 0.06 ± [1.5 ± 0.1] 0.06 ± [1.5 ± 0.1] ± ± ± [4.0 ± 0.1] [4.0 ± 0.1] [2.0 ± 0.05] ± ± ± [4.0 ± 0.1] [4.0 ± 0.1] [2.0 ± 0.05] ± [1.75 ± 0.1] ± [1.75 ± 0.1] ± ± ± [3.5 ± 0.05] [8.0 ± 0.2] [0.95 ± 0.05] ± ± ± [3.5 ± 0.05] [8.0 ± 0.2] [1.05 ± 0.05] Note (1) A 0, B 0 are determined by the maximum dimensions to the ends of the terminals extending from the component body and / or the body dimensions of the component. The clearance between the ends of the terminals or body of the component to the sides and depth of the cavity (A 0, B 0 ) must be within 0.002" (0.05 mm) minimum and 0.020" (0.50 mm) maximum. The clearance allowed must also prevent rotation of the component within the cavity of not more than 20. Revision: 16-Jan-18 7 Document Number: 40076

12 PACKING AND STORAGE Polymer capacitors meet moisture sensitivity level rating (MSL) of 3 or 4 as specified in IPC/JEDEC J-STD-020 and are dry packaged in moisture barrier bags (MBB) per J-STD-033. Standard Ratings table defines MSL level for each particular family. Level 3 specifies a floor life (out of bag) of 168 hours and level 4 specifies a floor life of 72 hours at 30 C maximum and 60 % relative humidity (RH). Unused capacitors should be re-sealed in the MBB with fresh desiccant. A moisture strip (humidity indicator card) is included in the bag to assure dryness. To remove excess moisture, capacitors can be dried at 40 C (standard dry box conditions). For detailed recommendations please refer to J-STD-033. RECOMMENDED REFLOW PROFILES recommends no more than 3 cycles of reflow in accordance with J-STD-020. T P Max. ramp up rate = 3 C/s Max. ramp down rate = 6 C/s t p T L Temperature TSmax. T Smin. Preheat area t L t S 25 Time 25 C to peak Time PROFILE FEATURE SnPb EUTECTIC ASSEMBLY LEAD (Pb)-FREE ASSEMBLY PREHEAT AND SOAK Temperature min. (T Smin. ) 100 C 150 C Temperature max. (T Smax. ) 150 C 200 C Time (t S ) from (T Smin. to T Smax. ) 60 s to 120 s 60 s to 120 s RAMP UP Ramp-up rate (T L to T p ) 3 C/s maximum Liquidus temperature (T L ) 183 C 217 C Time (t L ) maintained above T L 60 s to 150 s Peak package body temperature (T p ) max. Depends on type and case - see table below Time (t p ) within 5 C of the peak max. temperature 20 s 5 s RAMP DOWN Ramp-down rate (T p to T L ) 6 C/s maximum Time from 25 C to peak temperature 6 min maximum 8 min maximum PEAK PACKAGE BODY TEMPERATURE (T p ) MAXIMUM TYPE CASE CODE PEAK PACKAGE BODY TEMPERATURE (T P ) MAX. SnPb EUTECTIC ASSEMBLY LEAD (Pb)-FREE ASSEMBLY T55 J, P, A, T, B, Z, V, D 260 C T52 E1, E5, M1 n/a 260 C T58 MM, M0, W9, W0, A0, AA, B0, BB 260 C T59 EE 220 C 250 C T54 EE 220 C 250 C Notes T52, T55, and T58 capacitors are process sensitive. PSL classification to JEDEC J-STD-075: R4G T54 and T59 capacitors are process sensitive. PSL classification to JEDEC J-STD-075: R6G Revision: 16-Jan-18 8 Document Number: 40076

13 MOLDED CAPACITORS, T55 TYPE PAD DIMENSIONS in millimeters L Pattern Capacitor X W Y G Z CASE / CAPACITOR SIZE PAD DIMENSIONS DIMENSIONS L W G (max.) Z (min.) X (min.) Y (Ref.) J P A T / B Z / V / D LEADFRAMELESS MOLDED CAPACITORS, ALL TYPES PAD DIMENSIONS in inches [millimeters] B D C A FAMILY CASE CODE A (NOM.) B (MIN.) C (NOM.) D (MIN.) E1 / E [2.40] [1.85] [4.75] [8.45] T52 M [4.10] [1.85] [4.75] [8.45] MM, M [0.61] [0.70] [0.64] [2.03] W0, W [0.89] [0.74] [1.05] [2.52] T58 AA, A0, A [1.19] [1.06] [1.65] [3.76] BB, B [2.39] [1.11] [1.82] [4.03] T59 / T54 EE [5.30] [2.50] [4.30] [9.30] Revision: 16-Jan-18 9 Document Number: 40076

14 GUIDE TO APPLICATION 1. AC Ripple Current: the maximum allowable ripple current shall be determined from the formula: where, P = power dissipation in W at +45 C as given in the tables in the product datasheets. R ESR = the capacitor equivalent series resistance at the specified frequency. 2. AC Ripple Voltage: the maximum allowable ripple voltage shall be determined from the formula: or, from the formula: where, P = power dissipation in W at +45 C as given in the tables in the product datasheets. R ESR = The capacitor equivalent series resistance at the specified frequency. Z = The capacitor impedance at the specified frequency. 2.1 The tantalum capacitors must be used in such a condition that the sum of the working voltage and ripple voltage peak values does not exceed the rated voltage as shown in figure below. Voltage I RMS V RMS V RMS = P = Z R ESR P R ESR = I RMS x Z Ripple voltage Operating voltage Working voltage Time (s) Rated voltage 3. Temperature Derating: power dissipation is affected by the heat sinking capability of the mounting surface. If these capacitors are to be operated at temperatures above +45 C, the permissible ripple current (or voltage) shall be calculated using the derating coefficient as shown in the table below: MAXIMUM RIPPLE CURRENT TEMPERATURE DERATING FACTOR 45 C C C C Reverse Voltage: the capacitors are not intended for use with reverse voltage applied. However, they are capable of withstanding momentary reverse voltage peaks, which must not exceed the following values: At 25 C: 10 % of the rated voltage or 1 V, whichever is smaller. At 85 C: 5 % of the rated voltage or 0.5 V, whichever is smaller. At 105 C: 3 % of the rated voltage or 0.3 V, whichever is smaller. 5. Mounting Precautions: 5.1 Limit Pressure on Capacitor Installation with Mounter: pressure must not exceed 4.9 N with a tool end diameter of 1.5 mm when applied to the capacitors using an absorber, centering tweezers, or similar (maximum permitted pressurization time: 5 s). An excessively low absorber setting position would result in not only the application of undue force to the capacitors but capacitor and other component scattering, circuit board wiring breakage, and / or cracking as well, particularly when the capacitors are mounted together with other chips having a height of 1 mm or less. 5.2 Flux Selection Select a flux that contains a minimum of chlorine and amine After flux use, the chlorine and amine in the flux remain must be removed. 5.3 Cleaning After Mounting: the following solvents are usable when cleaning the capacitors after mounting. Never use a highly active solvent. Halogen organic solvent (HCFC225, etc.) Alcoholic solvent (IPA, ethanol, etc.) Petroleum solvent, alkali saponifying agent, water, etc. Circuit board cleaning must be conducted at a temperature of not higher than 50 C and for an immersion time of not longer than 30 minutes. When an ultrasonic cleaning method is used, cleaning must be conducted at a frequency of 48 khz or lower, at an vibrator output of 0.02 W/cm 3, at a temperature of not higher than 40 C, and for a time of 5 minutes or shorter. Notes Care must be exercised in cleaning process so that the mounted capacitor will not come into contact with any cleaned object or the like or will not get rubbed by a stiff brush or similar. If such precautions are not taken particularly when the ultrasonic cleaning method is employed, terminal breakage may occur. When performing ultrasonic cleaning under conditions other than stated above, conduct adequate advance checkout. Revision: 16-Jan Document Number: 40076

15 Legal Disclaimer Notice Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on s knowledge of typical requirements that are often placed on products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the product could result in personal injury or death. Customers using or selling products not expressly indicated for use in such applications do so at their own risk. Please contact authorized personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of. Product names and markings noted herein may be trademarks of their respective owners VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000

Guide for Tantalum Solid Electrolyte Chip Capacitors with Polymer Cathode

Guide for Tantalum Solid Electrolyte Chip Capacitors with Polymer Cathode Guide for Tantalum Solid Electrolyte Chip Capacitors with Polymer Cathode INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical

More information

vpolytan TM Polymer Surface Mount Chip Capacitors, Compact, Leadframeless Molded Type

vpolytan TM Polymer Surface Mount Chip Capacitors, Compact, Leadframeless Molded Type vpolytan TM Polymer Surface Mount Chip Capacitors, Compact, Leadframeless Molded Type T58 FEATURES Low ESR 100 % surge current tested Molded case available in 8 case codes including 0603 and 0805 footprint

More information

vpolytan TM Polymer Surface Mount Chip Capacitors, Molded Case, High Performance Type

vpolytan TM Polymer Surface Mount Chip Capacitors, Molded Case, High Performance Type Vishay Polytech vpolytan TM Polymer Surface Mount Chip Capacitors, Molded Case, High Performance Type PERFORMANCE / ELECTRICAL CHARACTERISTICS Operating Temperature: -55 C to +105 C Capacitance Range:

More information

Guide for Conformal Coated Tantalum Capacitors

Guide for Conformal Coated Tantalum Capacitors Guide for Conformal Coated Tantalum Capacitors INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability,

More information

Guide for Molded Tantalum Capacitors

Guide for Molded Tantalum Capacitors Guide for Molded Tantalum Capacitors INTRODUCTION Tantalum electrolytic capacitors are the preferred choice in applications where volumetric efficiency, stable electrical parameters, high reliability,

More information

Solid Tantalum Surface Mount Chip Capacitors, Molded Case, 0805 Size

Solid Tantalum Surface Mount Chip Capacitors, Molded Case, 0805 Size TMCP Solid Tantalum Surface Mount Chip Capacitors, Molded Case, 0805 Size PERFORMANCE / ELECTRICAL CHARACTERISTICS Operating Temperature: -55 C to +125 C (above +85 C, voltage derating is required) Capacitance

More information

Solid Tantalum Chip Capacitors, MICROTAN, High CV Leadframeless Molded Low Profile

Solid Tantalum Chip Capacitors, MICROTAN, High CV Leadframeless Molded Low Profile TL8 Solid Tantalum Chip Capacitors, MICROTAN, High CV Leadframeless Molded Low Profile FEATURES Ultra-low profile: 0.8 mm to 1.0 mm in a variety of case sizes Highest capacitance-voltage product in industry

More information

Solid Tantalum Chip Capacitors, TANTAMOUNT, Ultra-Low ESR, Conformal Coated, Maximum CV

Solid Tantalum Chip Capacitors, TANTAMOUNT, Ultra-Low ESR, Conformal Coated, Maximum CV Solid Tantalum Chip Capacitors, TANTAMOUNT, Ultra-Low ESR, Conformal Coated, Maximum CV 597D PERFORMANCE CHARACTERISTICS www.vishay.com/doc?40194 Operating Temperature: -55 C to +125 C (above 85 C, voltage

More information

Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, Low ESR

Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, Low ESR 593D Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, Low ESR Effective September 2005, new capacitor ratings will not be added to the 593D series. All new ratings are available in

More information

Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, Standard Industrial Grade

Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, Standard Industrial Grade Solid Tantalum Surface Mount Chip Capacitors TANTAMOUNT, Molded Case, Standard Industrial Grade PERFORMANCE / ELECTRICAL CHARACTERISTICS www.vishay.com/doc?40192 Operating Temperature: -55 C to +125 C

More information

High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 1000 h) Thick Film Technology

High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 1000 h) Thick Film Technology High Stability Resistor Chips (< 0.25 % at Pn at 70 C during 0 h) Thick Film Technology thick film resistor chips are specially designed to meet very stringent specifications in terms of reliability, stability

More information

20 W Power Resistor, Thick Film Technology, TO-220

20 W Power Resistor, Thick Film Technology, TO-220 20 W Power Resistor, Thick Film Technology, TO-220 DESIGN SUPPORT TOOLS Models Available click logo to get started The well known TO-220 package is compact and easy to mount. DIMENSIONS in millimeters

More information

High Temperature (245 C) Thick Film Chip Resistor

High Temperature (245 C) Thick Film Chip Resistor High Temperature (245 C) Thick Film Chip Resistor For applications such as down hole applications or aircraft breaking systems, the need for parts able to withstand very severe conditions (temperature

More information

Metal Film Resistors, Industrial, Precision

Metal Film Resistors, Industrial, Precision Metal Film Resistors, Industrial, Precision FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Available Excellent high frequency characteristics Exceptionally

More information

ESCC ( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %), Thin Film Chip Resistors

ESCC ( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %), Thin Film Chip Resistors ( ) 4001/023 Qualified High Precision (5 ppm, 0.01 %), Thin Film Chip Resistors DESIGN SUPPORT TOOLS Models Available click logo to get started Thin Film division holds QML qualification ( technology flow

More information

Precision Surface Mount Resistors Wirewound or Metal Film Technologies

Precision Surface Mount Resistors Wirewound or Metal Film Technologies Precision Surface Mount Resists irewound Metal Film Technologies FEATURES Accding to CECC 40402-801 (wirewound) ide range of ohmic values (0.04 to 1 M) Low temperature coefficient (± 25 ppm/ C available)

More information

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder.

RoHS Compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Overview The KEMET Organic Capacitor (KO-CAP) is a tantalum capacitor with a Ta anode and Ta 2 O 5 dielectric. A conductive organic polymer replaces the traditionally used MnO 2 as the cathode plate of

More information

Wirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount

Wirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount Wirewound Resistors, Industrial Power, Aluminum Housed, hassis Mount DESIGN SUPPORT TOOLS Models click logo to get started FEATURES Molded construction for total environmental protection omplete welded

More information

SMD PTC - Nickel Thin Film Linear Thermistors

SMD PTC - Nickel Thin Film Linear Thermistors SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage

More information

Overview. Benefits. Applications. Tantalum Through-Hole Capacitors Hermetically Sealed T550 Axial Polymer Hermetic Seal (PHS) 105 C and DLA Series

Overview. Benefits. Applications. Tantalum Through-Hole Capacitors Hermetically Sealed T550 Axial Polymer Hermetic Seal (PHS) 105 C and DLA Series Tantalum Through-Hole Capacitors Hermetically Sealed T550 Axial Polymer Hermetic Seal (PHS) 105 C and DLA Series Overview The KEMET T550 Series Polymer Hermetic Seal (PHS) is a tantalum capacitor with

More information

High Pulse, Fusible, Non-Inductive, Flameproof, Metal Film Resistor

High Pulse, Fusible, Non-Inductive, Flameproof, Metal Film Resistor High Pulse, Fusible, Non-Inductive, Flameproof, Metal Film Resistor FEATURES Designed to meet UL1412 safety requirements Defined fusing characteristics Inherent non-inductive design Superior surge handling

More information

High Ohmic / High Voltage Metal Glaze Leaded Resistors

High Ohmic / High Voltage Metal Glaze Leaded Resistors High Ohmic / High Voltage Metal Glaze Leaded Resistors A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned electrolytic copper

More information

Power Resistor for Mounting onto a Heatsink Thick Film Technology

Power Resistor for Mounting onto a Heatsink Thick Film Technology Power Resistor for Mounting onto a Heatsink Thick Film Technology DESIGN SUPPORT TOOLS click logo to get started FEATURES 800 W at 85 C bottom case temperature Wide resistance range: 0.3 to 900 k E24 series

More information

Commercial Thin Film Chip Resistor, Surface Mount Chip

Commercial Thin Film Chip Resistor, Surface Mount Chip Commercial Thin Film Chip Resistor, Surface Mount Chip PTN Actual Size 1505 These chip resistors are available in both top side and wraparound termination styles in a variety of sizes. They incorporate

More information

PRELIMINARY. FRSH Series (0603, 0805, 1206, 1506, 2010, 2512) (Z1-Foil) Vishay Foil Resistors

PRELIMINARY. FRSH Series (0603, 0805, 1206, 1506, 2010, 2512) (Z1-Foil) Vishay Foil Resistors Ultra High Precision Foil Wraparound Surface Mount Chip Resistor with Extended Pads for High Power/High Temperature Applications up to +225 C, Load Life Stability of 0.05%,TCR to ± 1ppm/ C INTRODUCTION

More information

High Current Thermal Fuse

High Current Thermal Fuse High Current Thermal Fuse FEATURES Functioning temperature: F = (235 ± 15) C Holding temperature: H = 160 C Current: 55 A Material categorization: For definitions of compliance please see www.vishay.com/doc?99912

More information

Tantalum Wet Electrolytic Capacitor

Tantalum Wet Electrolytic Capacitor INTRODUCTION The structure of a Tantalum Wet Electrolytic Capacitor consists of four main elements: a primary electrode (anode), dielectric, a secondary electrode system (cathode) and a wet (liquid) electrolyte.

More information

Wirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount

Wirewound Resistors, Industrial Power, Aluminum Housed, Chassis Mount Wirewound Resistors, Industrial Power, FEATURES Molded construction for total environmental protection omplete welded construction Meets applicable requirements of MIL-PRF-18546 Available in non-inductive

More information

PRELIMINARY. HTHA (Z1-Foil)

PRELIMINARY. HTHA (Z1-Foil) Ultra High Precision Z1-Foil Technology Chip Resistor for Hybrid Circuits with Aluminum Wire Bonding for High Temperature Applications up to +240 C, Long Term Stability of 0.05%, TCR to ± 1ppm/ C INTRODUCTION

More information

HTHA (Z1-Foil) Vishay Foil Resistors

HTHA (Z1-Foil) Vishay Foil Resistors Ultra High Precision Z1-Foil Technology Chip Resistor for Hybrid Circuits with Aluminum Wire Bonding for High Temperature Applications up to +240 C, Long Term Stability of 0.05%, TCR to ± 1ppm/ C INTRODUCTION

More information

Applications R41 3 I M1 M

Applications R41 3 I M1 M R41, Class Y2, 300 VAC, 110 C (Automotive Grade) Overview The R41 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements

More information

RTD Simulator. Handy Resistor Simulates RTD Temperature Outputs, such as PT-100 and PT Vishay Foil Resistors FEATURES AND BENEFITS

RTD Simulator. Handy Resistor Simulates RTD Temperature Outputs, such as PT-100 and PT Vishay Foil Resistors FEATURES AND BENEFITS Handy Resistor Simulates RTD Temperature Outputs, such as PT-100 and PT-1000 FEATURES AND BENEFITS Temperature coefficient of resistance (TCR): 55 to +125, 25 ref. RTD simulator (C): ±2 ppm/ typical (see

More information

Overview. Benefits. Applications. Tantalum Through-Hole Capacitors Hermetically Sealed T550 Axial Polymer Hermetic Seal (PHS) 105ºC and DLA Series

Overview. Benefits. Applications. Tantalum Through-Hole Capacitors Hermetically Sealed T550 Axial Polymer Hermetic Seal (PHS) 105ºC and DLA Series Tantalum Through-Hole Capacitors Hermetically Sealed T550 Axial Polymer Hermetic Seal (PHS) 105ºC and DLA Series Overview The KEMET T550 Series Polymer Hermetic Seal (PHS) is a tantalum capacitor with

More information

Applications R46 K I P0 M

Applications R46 K I P0 M Overview The R46 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V 0. Applications For worldwide

More information

Applications R49 A N B1 M

Applications R49 A N B1 M R49, Class X1, 330 VAC, 110 C Overview The R49 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the requirements of UL 94 V 0. Applications

More information

MIL-PRF-39035, Char. H with a Smooth and Unidirectional Output

MIL-PRF-39035, Char. H with a Smooth and Unidirectional Output Bulk Metal Foil Ultra High Technology Precision Trimming Potentiometers, 3 / 8 " Square, RJ24 Style, Designed to Meet or Exceed the Requirements of MIL-PRF-39035, Char. H with a Smooth and Unidirectional

More information

Solid Tantalum Capacitors Frequently Asked Questions (FAQs)

Solid Tantalum Capacitors Frequently Asked Questions (FAQs) Solid Tantalum Capacitors (FAQs) GENERAL What is s selection of tantalum capacitors with solid MnO 2 electrolyte? What are your cage codes? Is my part counterfeit? What is the CTE of tantalum capacitors?

More information

Reference Only. 2.Part Numbering (ex) NF Z 5B BW 2R9 L N 1 0 L

Reference Only. 2.Part Numbering (ex) NF Z 5B BW 2R9 L N 1 0 L SpecNo.JENF243J-0011A-01 P1/10 CHIP NOISE FILTER NFZ5BBW LN10 REFERENCE SPECIFICATION 1.Scope This reference specification applies to NFZ5BBW_LN10L Series, Chip Noise Filter. 2.Part Numbering (ex) NF Z

More information

30 V to 60 V PTC Thermistors For Overload Protection

30 V to 60 V PTC Thermistors For Overload Protection 30 V to 60 V PTC Thermistors 238 66. 5.../PTCCL..H...BE FEATURES Wide range of trip and non-trip currents: From 94 ma up to 2 A for the trip current Small ratio between trip and non-trip currents (I t

More information

General Purpose Metallized Polyester Film Capacitors R82 Series, Radial, 5 mm Lead Spacing, VDC (Automotive Grade) Applications

General Purpose Metallized Polyester Film Capacitors R82 Series, Radial, 5 mm Lead Spacing, VDC (Automotive Grade) Applications General Purpose Metallized Polyester Film Capacitors R82 Series, Radial, 5 mm Lead Spacing, 50 400 VDC (Automotive Grade) Overview The R82 Series is constructed of metallized polyester film (wound or stacked

More information

FRSM Series (Z1 Foil Technology)

FRSM Series (Z1 Foil Technology) (Z1 Foil Technology) UltraHigh-PrecisionFRSMWrap-AroundChipResistors,Z1FoilTechnologyConfiguration Resistors, Z1 Foil Technology Configuration with TCR of ±0.05 ppm/ C and Improved Load-Life Stability

More information

Tantalum Through-Hole Capacitors Radial Dipped T350, T351, T352, T353, T354, T355 and T356 Series UltraDip II Polar

Tantalum Through-Hole Capacitors Radial Dipped T350, T351, T352, T353, T354, T355 and T356 Series UltraDip II Polar T350, T351, T352, T353, T354, T355 and T356 Series UltraDip II Polar Overview The KEMET UltraDip II Series offers quality instrument and entertainment system designers the widely recognized advantages

More information

1-8M CMF F T-1 R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING

1-8M CMF F T-1 R36 HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE TEMP. COEFFICIENT PACKAGING CMF Industrial Metal Film Resistors, Industrial FEATURES Small size - conformal coated Flame retardant epoxy coating Controlled temperature coefficient Excellent high frequency characteristics Exceptionally

More information

TANTALUM DIPPED / RADIAL POLAR

TANTALUM DIPPED / RADIAL POLAR TANTALUM IPPE / RAIAL POLAR PERFORMANCE CARACTERISTICS CAPACITANCE/VOLTAGE RANGE: T35X/T39X: 0.1-680µF, 3-50 s. T36X: 0.1-330µF, 6-50 s. CAPACITANCE TOLERANCE: Available in standard EIA nominal values

More information

Reference Only. Spec. No. JENF243D-0006K-01 P 1/ 8

Reference Only. Spec. No. JENF243D-0006K-01 P 1/ 8 Spec. No. JENF243D-0006K-01 P 1/ 8 Chip EMIFIL LC Combined Monolithic NFL21SP X1C Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Monolithic Type NFL21S

More information

Applications. Capacitance Code (pf) Tolerance

Applications. Capacitance Code (pf) Tolerance Surface Mount Conductive Polymer Aluminum Solid Electrolytic Capacitors Overview Applications KEMET s A767 Series of Surface Mount Conductive Polymer Aluminum Solid Electrolytic Capacitors offer longer

More information

Reference Only. Spec. No. JENF243E-0003Q-01 P 1 / 8. Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification

Reference Only. Spec. No. JENF243E-0003Q-01 P 1 / 8. Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification Spec. No. JENF243E-0003Q-01 P 1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE61PT 1H9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for

More information

Reference Only. Spec. No. JENF243E-0002Q-01 P1 / 8

Reference Only. Spec. No. JENF243E-0002Q-01 P1 / 8 Spec. No. JENF243E-0002Q-01 P1 / 8 Chip EMIFIL LC Combined Type for Large Current NFE31PT 1E9 Reference Specification 1. Scope This reference specification applies to Chip EMIFIL LC Combined Type for Large

More information

Rated (VDC) 3 = 25 5 = 50 1 = = 200 A = 250 C0G

Rated (VDC) 3 = 25 5 = 50 1 = = 200 A = 250 C0G Axial Leaded Multilayer Ceramic Capacitors Aximax, 400, Conformally Coated, C0G Dielectric, 25 250 VDC (Commercial Grade) Overview KEMET s Aximax conformally coated axial leaded ceramic capacitors in C0G

More information

IMPROVED PRODUCT. S Series. High Precision Foil Resistor with TCR of ± 2.0ppm/ C, Tolerance of ± 0.005% and Load Life Stability of ± 0.

IMPROVED PRODUCT. S Series. High Precision Foil Resistor with TCR of ± 2.0ppm/ C, Tolerance of ± 0.005% and Load Life Stability of ± 0. THROUGH HOLE S Series High Precision Foil Resistor with TCR of ± 2.0ppm/ C, Any value at any tolerance available within resistance range INTRODUCTION Bulk Metal Foil (BMF) Technology outperforms all other

More information

Reference Only. Chip Ferrite Bead BLM31 SZ1 Murata Standard Reference Specification [AEC-Q200]

Reference Only. Chip Ferrite Bead BLM31 SZ1 Murata Standard Reference Specification [AEC-Q200] P.1/9 Chip Ferrite Bead BLM31 SZ1 Murata Standard Reference Specification [AEC-Q200] 1. Scope This reference specification applies to Chip Ferrite Bead for Automotive Electronics BLM31_SZ Series based

More information

Wirewound Hex Power Resistor

Wirewound Hex Power Resistor irewound Hex Power Resistor FETURES Resistance-alloy round wire is continuously wound on specially designed porcelain insulators Open coil construction allows efficient heat dissipation and easily accomodates

More information

Metal Film Resistors, Industrial, Flameproof

Metal Film Resistors, Industrial, Flameproof FP Metal Film Resistors, Industrial, Flameproof STANDARD ELECTRICAL SPECIFICATIONS HISTORICAL P 25 C POER RATING P C P 70 C FEATURES Small physical size Low cost FP resistors have the ability to withstand

More information

Reference Only. Chip Ferrite Bead BLM31 SH1L Murata Standard Reference Specification [AEC-Q200]

Reference Only. Chip Ferrite Bead BLM31 SH1L Murata Standard Reference Specification [AEC-Q200] P.1/9 Chip Ferrite Bead BLM31 SH1L Murata Standard Reference Specification [AEC-Q200] 1. Scope This reference specification applies to Chip Ferrite Bead for Automotive Electronics BLM31_SH Series based

More information

The T262 Series is ideal for filtering applications and in defense power supplies where low ESR is essential.

The T262 Series is ideal for filtering applications and in defense power supplies where low ESR is essential. Tantalum Through-Hole apacitors Hermetically Sealed Overview KEMET s T262 Series (SR21 Style) hermetically sealed solid tantalum capacitors are qualified to MIL 39003/09. This series is similar to KEMET's

More information

Cal-Chip Electronics, Incorporated Thick Film Chip Resistors - RM Series

Cal-Chip Electronics, Incorporated Thick Film Chip Resistors - RM Series Thick Film Chip Resistors - RM Series Fixed Chip Resistors manufactured for more compact electronic components and automatic mounting system. These Chip Resistors have electrical stability and mechanical

More information

Tantalum and Niobium Technology Roadmap

Tantalum and Niobium Technology Roadmap Tantalum and Technology Roadmap T. Zednicek, B. Vrana AVX Czech Republic s.r.o., Dvorakova 328, 563 01 Lanskroun, Czech Republic Phone: +420 465 358 126, Fax: +420 465 358 128 W. A. Millman, J. Gill AVX

More information

General Purpose Chip Resistors MCMR Series

General Purpose Chip Resistors MCMR Series Description The resistors are constructed in a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste that is applied to the top surface

More information

IR Sensor Module for Remote Control Systems

IR Sensor Module for Remote Control Systems IR Sensor Module for Remote Control Systems TSMP6000 FEATURES Photo detector and preamplifier in one package AC coupled response from 20 khz to 60 khz, all data formats Improved shielding against electrical

More information

Reference Only. Spec No. JELF243A-9134D-01 P1/8

Reference Only. Spec No. JELF243A-9134D-01 P1/8 Spec No. JELF243A-9134D-01 P1/8 CHIP COIL(CHIP INDUCTORS)LQH2MPZ GRL SPECIFICATION Murata Standard Reference Specification AEC-Q200 1. Scope This reference specification applies to LQH2MPZ_GR Series, Chip

More information

(CX01 and CX05 Style)

(CX01 and CX05 Style) T322 and T323 Series MIL PRF 49137/1 and 5 (CX01 and CX05 Style) Overview The KEMET T322 and T323 Series (CX01 and CX05 Style) offers a complete line of extended range molded solid tantalum capacitors

More information

TANTALUM DIPPED / RADIAL POLAR

TANTALUM DIPPED / RADIAL POLAR TANTALUM IPPE / RAIAL POLAR PERFORMANCE CARACTERISTICS CAPACITANCE/VOLTAGE RANGE: T35X/T39X: 0.1-680µF, 3-50 s. T36X: 0.1-330µF, 6-50 s. CAPACITANCE TOLERANCE: Available in standard EIA nominal values

More information

Reference Only. This reference specification applies to Wire Wound Chip Common Mode Choke Coil.

Reference Only. This reference specification applies to Wire Wound Chip Common Mode Choke Coil. Spec. No. JEFL243C-0025G-01 P 1/10 Wire Wound Chip Common Mode Choke Coil DLW5BTM TQ2 Reference Specification 1. Scope This reference specification applies to Wire Wound Chip Common Mode Choke Coil. 2.

More information

Topview 5630 Red SMD LED

Topview 5630 Red SMD LED Topview 5630 Red SMD LED 1. Features - Chip High-Luminosity SMD LED - 5.6 x 3.0 x 0.9 mm (L x W x H), 4-Pin, Small Size Surface Mount Type - Wide Viewing Angle - Long Operating Life - MSL 3 2. Applications

More information

Applications R47 4 F M

Applications R47 4 F M R47 Series, Class X2, 440 VAC, 110ºC (Automotive Grade) Overview The R47 Series is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box of material meeting the

More information

1/2W, 0805 Low Resistance Chip Resistor (Lead / Halogen free)

1/2W, 0805 Low Resistance Chip Resistor (Lead / Halogen free) 1. Scope 1/2W, 0805 (Lead / Halogen free) This specification applies to 1.2mm x 2.0mm size 1/2W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL

More information

Reference Only. Marked three digits system.(ex. 270pF 271) 8 Lead Type

Reference Only. Marked three digits system.(ex. 270pF 271) 8 Lead Type Spec No. JENF243F-0018K-01 P1/11 Disc-Type EMIFIL (A miniature three-terminal capacitor) DSS6N 1.Scope This reference specification applies to DSS6N series. 2.Part Numbering (Ex.) DS S 6 N B3 2A 271 Q93

More information

Reference Only. This reference specification applies to Chip Ferrite Bead Array BLA31 Series used for electronic machinery. (8)Numbers of Circuit

Reference Only. This reference specification applies to Chip Ferrite Bead Array BLA31 Series used for electronic machinery. (8)Numbers of Circuit Spec. No. JENF243A 0008N-01 P 1 / 9 1. Scope Chip Ferrite Bead Array BLA31SN4 Reference Specification This reference specification applies to Chip Ferrite Bead Array BLA31 Series used for electronic machinery.

More information

No.JEMCP B a)equivalent Circuit 5.Rated value MURATA PART NO. NFM2CC0UH3D NFM2CC02RH3D (3) Nominal Capacitance Capacitance Tolerance

No.JEMCP B a)equivalent Circuit 5.Rated value MURATA PART NO. NFM2CC0UH3D NFM2CC02RH3D (3) Nominal Capacitance Capacitance Tolerance No.JEMCP0-00863B CHIP EMIFIL CHIP 3-TERMINAL CAPACITOR FOR GENERAL NFM2CC Series Reference Sheet.Scope 2.Reference PART No. List 2 3 4 5 6 7 8 3.MURATA Part NO. System (Ex.) This product specification

More information

ISA-WELD // Precision resistors. BRS // Size Features

ISA-WELD // Precision resistors. BRS // Size Features Features 2 W power rating at 2 C Constant current up to 32 A (2 mohm) copper connectors Solid metal precision resistance materials Excellent long-term stability Ideal suited for mounting on DBC / IMS substrate

More information

Tantalum Through-Hole Capacitors Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style)

Tantalum Through-Hole Capacitors Hermetically Sealed T245 Series Axial High Temperature Solder (CSR23 Style) Tantalum Through-Hole apacitors Hermetically Sealed Overview The KEMET standard MIL case hermetically sealed T245 Series (Extended apacitance Range) is compact, ruggedly built and designed for miniaturized

More information

5W White SPHWHTA3N500

5W White SPHWHTA3N500 Product Family Data Sheet Rev. 00 2016.11.01 111 High Power LED Ceramic Series 5W White SPHWHTA3N500 Features & Benefits Package : Silicone covered ceramic substrate Dimension : 3.5 mm x 3.5 mm Technology

More information

FrelTec GmbH. Multi-Layer Power Inductor SMD

FrelTec GmbH. Multi-Layer Power Inductor SMD GmbH Mathildenstr. 10A 82319 Starnberg Germany SMD 4/15/2013 1/13 GmbH www.freltec.com SPECIFICATION Part Number 141 02 * 101 * M T04 * Type Size Value Toleranc e Packing 141 : SMD Multi-Layer Power Inductor

More information

SURFACE MOUNT ASSEMBLY OF MINI-CIRCUITS COMPONENTS

SURFACE MOUNT ASSEMBLY OF MINI-CIRCUITS COMPONENTS Application Note AN-40-014 SURFACE MOUNT ASSEMBLY OF MINI-CIRCUITS COMPONENTS DATE ISSUED: January 4, 2012 AN-40-014 Rev.: A M150261 (04/14/15) File: AN40014.doc Page 1 of 10 1.0 Introduction Mini-Circuits

More information

Application Note. Capacitor Selection for Switch Mode Power Supply Applications

Application Note. Capacitor Selection for Switch Mode Power Supply Applications Application Note AN37-0013 Capacitor Selection for Switch Mode Power Supply Applications 1. Introduction Faced with the availability of multiple capacitor options for use in high reliability SMPS applications,

More information

Reference Only. Spec.No.JENF243A-0034J-01 P1/8

Reference Only. Spec.No.JENF243A-0034J-01 P1/8 Spec.No.JENF243A-0034J-01 P1/8 Chip Ferrite Bead BLM03H N1 Reference Specification 1.Scope This reference specification applies to Chip Ferrite Bead BLM03H N Series. 2.Part Numbering (ex.) BL M 03 HG 601

More information

1/2W, 0612 Low Resistance Chip Resistor (Lead / Halogen Free)

1/2W, 0612 Low Resistance Chip Resistor (Lead / Halogen Free) 1/2W, 0612 (Lead / Halogen Free) 1. Scope This specification applies to 1.6mm x 3.2mm size 1/2W, fixed metal film chip resistors rectangular type for use in electronic equipment. 2. Type Designation RL1632W

More information

Anti-surge chip resistors

Anti-surge chip resistors Anti-surge chip resistors ESR series Datasheet Features 1)Exclusive resistive element pattern and laser trimming technology results in significantly improved surge resistance characteristics. 2)2kV to

More information

TOSHIBA LED Lamp TLCBD1060(T18) Storage Temperature T stg ( C) TLCBD to to 100. Power Dissipation P D (mw)

TOSHIBA LED Lamp TLCBD1060(T18) Storage Temperature T stg ( C) TLCBD to to 100. Power Dissipation P D (mw) TOSHIBA LED Lamp TLCBD60(T18) Panel Circuit Indicator Unit: mm Surface-mount devices 2.2 (L) 1.4 (W) 1.3 (H) mm LED chip + phosphor Color: ICE Blue Cx=0.20(typ), Cy=0.30(typ), 90 mcd(typ.) @ma Low drive

More information

Chip Phototransistor with Right Angle Lens

Chip Phototransistor with Right Angle Lens Chip Phototransistor with Right Angle Lens Features Fast response time High photo sensitivity Small junction capacitance Package in 8mm tape in 7 diameter reel Pb free The product itself will remain within

More information

DATA SHEET Metal Element Current Sensing Chip Resistor CLS Series

DATA SHEET Metal Element Current Sensing Chip Resistor CLS Series DATA SHEET Metal Element Current Sensing Chip Resistor 0.5% TO 5%, TCR ±25 TO ±450 SIZE: 1206/2010/2512/2725/2728/4527/4527S RoHs Compliant 14 October, 2016 V.4 DS-ENG-007 23 Page: 2 of 1. SCOPE 1.1 This

More information

Parameter Symbol Value Unit. Operating Temperature Top -40 To +100 C. Kingbright. Storage Temperature Tstg -40 To +110 C

Parameter Symbol Value Unit. Operating Temperature Top -40 To +100 C. Kingbright. Storage Temperature Tstg -40 To +110 C ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: KTDS-3536QB14Z4S Blue Absolute Maximum Ratings at TA = 25 C Parameter Symbol Value Unit DC Forward Current

More information

TO-2013BC-MYE. Surface Mount Device LED. Features. Dimensions MOLDING BODY(LENS) 0.40 PCB 0.40 CATHODE MARK SOLDERING TERMINAL

TO-2013BC-MYE. Surface Mount Device LED. Features. Dimensions MOLDING BODY(LENS) 0.40 PCB 0.40 CATHODE MARK SOLDERING TERMINAL TO-2013BC-MYE Surface Mount Device LED Part Number Material Chip Source Color Lens Color TO-2013BC-MYE AlGaInP Yellow Water clear Features IC compatible Compatible with automatic placement equipment Compatible

More information

Reference Only. Reference Spec.No.JENF243A-9103H-01 P1/8. Chip Ferrite Bead BLM15 SH1D Reference Specification [AEC-Q200]

Reference Only. Reference Spec.No.JENF243A-9103H-01 P1/8. Chip Ferrite Bead BLM15 SH1D Reference Specification [AEC-Q200] Reference Spec.No.JENF243A-9103H-01 P1/8 Chip Ferrite Bead BLM15 SH1D Reference Specification [AEC-Q200] 1.Scope This reference specification applies to Chip Ferrite Bead BLM15_SH series for Automotive

More information

Klaran GENERAL DISINFECTION

Klaran GENERAL DISINFECTION DATA SHEET Klaran Crystal IS deep UV LEDS leverage our unique Aluminum Nitride technology to provide stronger and more consistent germicidal performance in the key 260-280 nm UVC wavelength range. Whether

More information

Applications. Overview. Benefits. Part Number System. Pin/Solder Tag/Audio Aluminum Electrolytic Capacitors ALC10S Series, +85 C

Applications. Overview. Benefits. Part Number System. Pin/Solder Tag/Audio Aluminum Electrolytic Capacitors ALC10S Series, +85 C Pin/Solder Tag/Audio Aluminum Electrolytic Capacitors ALC10S Series, +85 C Overview KEMET's ALC10S Series of capacitors features improvements in general construction of the capacitors to achieve better

More information

LITE-ON TECHNOLOGY CORPORATION

LITE-ON TECHNOLOGY CORPORATION Features * High luminous intensity output. * Low power consumption. * High efficiency. * Versatile mounting on P.C. board or panel. * I.C. Compatible/low current requirements. * Popular T-13/4 diameter.

More information

Recommendation for Handling and Assembly of Infineon Hallsensor PG-SSO Packages

Recommendation for Handling and Assembly of Infineon Hallsensor PG-SSO Packages Recommendation for Handling and Assembly of Infineon Hallsensor PG-SSO Packages Additional Information DS4, August 2012 Edition 2012-08-06 Published by Infineon Technologies AG 81726 Munich, Germany 2012

More information

SYGT/S530-E2 LAMP. Features. Description. Applications. Device Selection Guide. Choice of various viewing angles

SYGT/S530-E2 LAMP. Features. Description. Applications. Device Selection Guide.  Choice of various viewing angles Features Choice of various viewing angles Available on tape and reel. Reliable and robust Pb free The product itself will remain within RoHS compliant version. Description The series is specially designed

More information

Reference Only. Spec No. JELF243B-9102E-01 P.1 / 9

Reference Only. Spec No. JELF243B-9102E-01 P.1 / 9 Spec No. JELF243B-9102E-01 P.1 / 9 CHIP COIL (CHIP INDUCTORS) LQG18HH 00D SPECIFICATION Murata Standard Reference Specification [AEC-Q200] 1. Scope This reference specification applies to LQG18HH_00 series

More information

Dimensions: [mm] Recommended Land Pattern: [mm] 3,5 pl 3,5 1,0 0,6. Pattern Properties: Article Properties:

Dimensions: [mm] Recommended Land Pattern: [mm] 3,5 pl 3,5 1,0 0,6. Pattern Properties: Article Properties: Dimensions: [mm] Recommended Land Pattern: [mm] 3,5 pl 3,5 1,0 0,6 1 End 2,2 1 End 2,6 1,0 ±0,05 L ±0,15 L2 ±0,1 Pl ±0,1 h 0,13 0,35 ±0,05 3,00 ±0,15 1,7 General tolerance ±0,05 Pl Pl 1,7 1,7 ±0,25 7,1

More information

Package Information : WSOF5

Package Information : WSOF5 Package Information : WSOF5 1. Package Information Package Name WSOF5 Type SOP Pin Count 5 Outline Dimension Drowing No. EX129-5001 Package Weight [g] 0.0028 Lead Finish Pure Tin MSL Level Level3 2. Package

More information

Carbon film resistors

Carbon film resistors Carbon film resistors (6.3 φ 2.4 size: 1 / 3W) ROHM resistors are produced using an integrated production system for parts and materials, and state of the art technology to ensure high precision productivity,

More information

Sidelooker Infrared LED IR928-6C-F

Sidelooker Infrared LED IR928-6C-F Features High reliability High radiant intensity Peak wavelength λp=940nm 2.54mm lead spacing Low forward voltage Pb free This product itself will remain within RoHS compliant version. Compliance with

More information

SMD Technical Data Sheet High Power Green LED LH5070GCZ1.LW01

SMD Technical Data Sheet High Power Green LED LH5070GCZ1.LW01 SMD Technical Data Sheet High Power Green LED LH5070GCZ1.LW01 Features High power green LED ( 7.0 x 5.0 x 1.3 mm ) Lead frame package with individual 6 pins 1 chip inside 1 zener inside Wide view angle

More information

High Temperature (230 C) High Precision Thin Film Wraparound Chip Resistor Arrays, Sulfur Resistant

High Temperature (230 C) High Precision Thin Film Wraparound Chip Resistor Arrays, Sulfur Resistant High Temperature (230 ) High Precision Thin ilm Wraparound hip Resistor rrays, Sulfur Resistant PRHT arrays can be used in most applications requiring a matched pair (or set) of resistor elements at very

More information

7343M/BAC3-ATVA/C5. Lamp

7343M/BAC3-ATVA/C5. Lamp Features Popular T-1 3/4 round package. Choice of various viewing angles. Available on tape and reel. Reliable and robust. The product itself will remain within RoHS compliant version. Descriptions The

More information

2.6± ±0.1. Taping specifications (Unit : mm) 4.0± ±0.05 φ1.55± ± ±0.1 φ1.0± Duty 0.5

2.6± ±0.1. Taping specifications (Unit : mm) 4.0± ±0.05 φ1.55± ± ±0.1 φ1.0± Duty 0.5 Rectifying Diode RR264M-400 Datasheet Series Dimensions (Unit : mm) Land size figure (Unit : mm) General Rectifying Application General rectification Features ) Small power mold type (PMDU) 2) High reliability

More information

Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W ppm/ C RS Stock No:

Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W ppm/ C RS Stock No: Datasheet RS Pro RS Series Axial Carbon Resistor 1kΩ ±5% 2W -500 +350ppm/ C RS Stock No: 707-8861 Product Details RS Pro axial carbon resistor with ±5% tolerance, provides 1 kω resistance and is power

More information