EAF. Ladle Furnace. Continuous Casting. Conventional Casting. Remelting VAR and ESR. Reheating Furnace. Open Die. Mill. Bar/Coil Finish Rolling Mill

Size: px
Start display at page:

Download "EAF. Ladle Furnace. Continuous Casting. Conventional Casting. Remelting VAR and ESR. Reheating Furnace. Open Die. Mill. Bar/Coil Finish Rolling Mill"

Transcription

1 TOOL STEELS

2 Conventional Casting EAF Ladle Furnace VD Continuous Casting MANUFACTURING PROCESSES FOR CONVENTIONAL AND REMELTED STEELS MELT SHOP Melting Process (Conventional): EAF (Electric Arc Furnace) VD (Vacuum Degassing) Remelting Process: ESR (Electroslag Remelting) VAR (Vacuum Arc Remelting) Remelting VAR and ESR Reheating Furnace Open Die Forging Press Blooming Mill Heat Treatment Bar/Coil Finish Rolling Mill Finishing

3 HIGH SPEED STEELS COLD WORK STEELS HOT WORK STEELS PLASTIC MOLD STEELS *Largest sizes upon inquiry. GAUGES AND SHAPES FOR TOOL STEELS Square Round VK5E VKM42 VWM3C VWM2 VWM7 VD2 VC131 VND VS7 VA2* VF800ATIM VH13ISO VPCW TENAX 300 VH SUPER VPCA VCM VH19 VW9 VMO VCO VP20ISO VP20ISOF VP20ISOFS VP100 VIMCOR N2711M VP20IM VH13IM VP420IM VP50IM VP to 225 mm 135 to 825 mm 135 to 500 mm 135 to 545 mm 135 to 560 mm 135 to 750 mm 135 to 355 mm 135 to 1350 mm (*) 135 to 1350 mm (*) 135 to 600 mm (**) 135 to 715 mm 135 to 600 mm 135 to 485 mm 0.90 to 225 mm 9 to 930 mm 9 to 565 mm 9 to 615 mm 9 to 630 mm 9 to 845 mm 9 to 400 mm 9 to 1350 mm 9 to 1350 mm 9 to 803 mm 9 to 675 mm 9 to 547 mm Focusing on quality and taking care of the environment

4 Hot Work Steels Similar ABNT ASTM SAE AISI DIN Wnr C Mn Cr Ni Mo W V OTHERS VH13ISO H , Si=1.00 VH13IM H Si=1.00 P=máx S=máx TENAX300 H11 (MOD.) (MOD.) Si=0.30 TENAX300IM H11 (MOD) (MOD) Si=0.30 P=máx S=máx VHSUPER (MOD.) Si=0.30 P=máx S=máx VHSUPERIM (MOD.) Si=0.30 VH13IM PLUS (*) H13 Double Remelting Double Remelting Si=1.00 P=máx S=máx VW9 (*) H20/H VCMAIM (*) H10 (MOD.) Co=2.80 N2888IM (*) Co=10.00 VCM H Si=0.30 VPCW H Si=1.00 VMO VCO * Steels sold upon inquiry, not available in stock. Hot Resistance Toughness Wear Resistance VH13ISO VH13IM TENAX300 VHSUPER VW9 VCM VPCW VMO VCO

5 HRC Application Hardnesses APPLICATIONS Forging dies and punches in presses. Punches for extrusion of non-ferrous alloys. Moulds for gravity die casting of light alloys, especially Al. Knives for hot cutting. Pressure die casting of aluminum alloys, in smaller or less complex parts. Blades for hot knives. Note: Impact energy greater than 200 J, for test specimens without a notch, according to NADCA #207-90; and greater than 10.8J (8 ft. lb), for test specimens with a V notch, according to NADCA # Premium Quality. Moulds for gravity die casting of light alloys, especially Al and Mg alloys, in complex or larger size parts. Moulds for thermoplastic polymer injection, with a high polishability and high mechanical resistance. High performance dies for forging presses. Blades for hot knives. Note: Impact energy greater than 250 J, for test specimens without a notch, according to NADCA #207-90; and greater than 13.5J (10 ft. lb), for test specimens with a V notch, according to NADCA # Material remelted via ESR. Superior Quality. Dies and components for pressure die casting of non-ferrous alloys, mainly aluminum. Forging dies, especially the ones that present complex dimensions or that do need a high resistance to cracking. Note: impact resistance > 300 J (test specimens taken from center and heat treated to attain 44/46 HRC). Premium Quality (NADCA) Steel developed to promote hot mechanical resistance equivalent to the H11 and H13 steels, but with a much superior toughness. Resistance to impact greater than 300 J, and testing according to NADCA. ESR remelted material. Applications: dies for pressure die casting of non-ferrous alloys, such as Al alloys, for which the TENAX 300 IM is recommended; forging dies and punches of complex geometry or subject to cracking and spinning for hot extrusion of non-ferrous alloys, especially Al. Superior Quality (NADCA) Dies and punches for forging, including applications of hot upsetting and inserts, where its high hot resistance can promote a significant performance improvement. Dies for pressure die casting and extrusion of aluminum and other non-ferrous metals. Premium Quality (NADCA) Steel with hot mechanical resistance rather superior to the H11 and H13 steels and good toughness. Material is ESR remelted. Typical applications: dies and punches for hot forging in press; dies for pressure die casting of non-ferrous alloys, in which the IM version is recommended and extrusion dies of Al alloys and Cu alloys. Superior Quality (NADCA) Double remelted material (ESR/VAR) showing enhanced homogeneity and greater isotropy than VH13IM Steel for tools with a maximum yield for continuous jobs at high temperatures and not subject to thermal shocks. Indicated for punches, press disks for extrusion machines, dies for presses and for automotive valve forging dies Tools for hot stamping and for pressure die casting of non-ferrous alloys (copper, brass, tin, lead and zinc based alloys). Dies for forging in Hatebur presses. Dies for forging automotive valves. ESR remelted material Tools for stamping in presses, inserts for pressure die casting and tools for heavy metal extrusion (dies and mandrels) Dies, moulds and punches for forging in high speed and elevated cooling of screws, nuts and rivets. Toolings for extrusion presses of tubes and blooms, especially water cooled punches. Toolings for pressure die casting of heavy metals. Removable parts in forging dies Dies and inserts for forging dies in presses, hot punches and knives for hot shears Standard steel for forging dies in high yield drop hammer, supplied in blocks or bars Low engraving dies for hot forging in hammers, blades for knives for cold cutting of blooms and steel sheets.

6 High Speed Steels Similar ABNT ASTM SAE AISI DIN Wnr C Mn Cr Ni Mo W V OTHERS HRC Application Hardnesses APPLICATIONS VWM2 ~M VWM7 M VKM42 M Co= VWM3C M3: VK5E ~M Co= VHSSM50 M50 ~ SINTER 23 M3: SINTER Co= High speed steel with a high versatility, with an excellent combination of toughness and wear resistance. Indicated for high quality twist drills, milling cutters of all types, taps, chasers, drill bits and machining tools in general. It is also used for cutting dies, punches, deep stamping dies and other cold plastic deformation tools. It is especially recommended for fine cutting edge tools such as taps, chasers, drill bits and twist drills. Capable of attaining hardness values of up to 68 HRC, as 8 cobalt gives it excellent characteristics of wear resistance and red hardness. These characteristics make it appropriate for heavy duty applications. However, it ought not to be used in applications subject to shocking or excessive vibrations. High speed steel with a greater vanadium content and, therefore, with a higher wear resistance. Due to a special processing, it guarantees finer carbides and good characteristics as to millibility. It is used mainly in the manufacturing of taps and cores. High demand roughening and finishing tools. Used in the manufacturing of milling cutters and profiling tools, special drill bits for machining of high resistant material. Drill bits and saw blades for common use. For tooling when toughness higher than other high speed steels and lower hardness are acceptable. Sintered steel made by powder metallurgy. Due to its elevated toughness properties, isotropy and wear resistance, it is indicated for special cutting tools such as spiral milling cutter, fellow blades, special drill bits, etc. and tools for cold working with cutting dies, extrusion punches, cutting punches, etc. It has properties similar to SINTER 23. Due to the addition of cobalt, it has a greater hot hardness, being indicated for heavy duty cutting tools. Wear Resistance Hot Hardness Toughness Millibility Machinability VWM2 VWM7 VKM42 VWM3C VK5E VHSSM50 SINTER 23 SINTER 30

7

8 Mould Steels Similar ABNT ASTM SAE AISI DIN Wnr C Mn Cr Ni Mo W V VP VP20ISO P ,36 1,60 1,85 0,75 0, VP20ISOF P ,36 1,60 1,85-0, VP20ISOFS P ,36 1,60 1,85-0, N2711M (MOD.) 0, ,10 1,65 0,48-0,075 VP420IM 420 (MOD.) ,40 0,50 13, ,25 VP50IM* - - 0,15 1,65 0,30 3,00 0, VH13IM AISI H ,40 0,35 5,20-1,30-0,90 V630 AISI ,035-15,40 4, VIMCOR - - 0,05 2,50 12, * Steels sold upon inquiry, not available in stock. Mechanical Resistance Polishability Corrosion Resistance Texturizing Response Weldability VP100 VP20ISO VP20ISOF VP20ISOFS N2711M VP420IM VP50IM* VH13IM V630 VIMCOR

9 OTHERS HRC Application Hardnesses APPLICATIONS S= 0, Steel made under vacuum degassing, having an enhanced machinability through Calcium inclusion treatment. Main benefits are hardness uniformity with a variation under 2 HRC throughout the part s cross section. Excellent weldability. High polishability (except for mirror-like grade) and high performance and manufacturing reproducibility. Mould holders, moulds for non-chlorinated plastic thermo- injection, dies for non-chlorinated thermo-plastic extrusion, moulds for blowing, hot chambers, when corrosion resistance is not necessary and several applications in moulds for plastics. Not recommendable for applications in which toughness and mirror-like finish grade are design requirements. Steel supplied as machined. It has good polishability and high texturization. It has enhanced machinability through special melt shop treatment. For improved wear resistance it can be nitrided or case hardened. Moulds for injection and extrusion of non-chlorinated and little abrasive thermoplastics. Large dimension moulds. Steel supplied as machined. It has good polishability and high texturization and the same machinability improvement as VP20ISO. For improved wear resistance it can be nitrided or case hardened. Recommended for moulds with thicknesses of up to 600 mm, such as moulds for injection and extrusion of non-chlorinated and little abrasive thermoplastics. Steel supplied as machined. It has an excellent machinability. Good nitriding response. Not recommended for parts that require texturization, chrome-plating and high polishability processes. Moulds for injection/extrusion of non-chlorinated and little abrasive thermoplastics that require low polishability. Mould bases and frames for plastic. Injection cores and moulds. Steel supplied as machined. It has a good polishability and texturizing response. For wear resistance enhancement it can be nitrided or case hardened. Due to the high hardness care must be taken when machining. Moulds for non-chlorinated plastics. Moulds for blowing. Dies for non-chlorinated thermoplastic extrusion. Si=0, Stainless steel after quenching and tempering. It has as its main advantage a high corrosion resistance, which allows for applications in wet environments. Moulds for chlorinated thermoplastic injection. Work and storage in wet atmosphere. Glass industry. Al=1,00 Si=0,30 Cu=1,00 S=0,12 Si=1,00 P=máx. 0,015 S=máx. 0,003 Cu=3,50 Nb+Ta=0,25 Si= 0,40 S= 0, Tool steel for moulds specially developed to be hardened through ageing heat treatment, with resistance higher than VP20. It has excellent polishability and texturization properties. It has an excellent weldability. Moulds for nonchlorinated thermoplastic injection. Moulds for charge reformed thermoplastics. Tool steel used in applications in moulds when hardnesses higher than VP20 and VP50 are desired. It has an excellent polishability. Moulds for non-chlorinated thermoplastic injection when a higher wear resistance is required, coupled with a good polishability. Moulds for glass. Precipitation hardened stainless steel. It has excellent properties on: dimensional and shape stability; weldability; corrosion resistance; polishability and response to texturization.steel used for tools for the conformation of thermoplastics, including under corrosive processes (conformation of chlorinated polymers). It can withstand and be stored in wet environments. Steel with excellent machinability and weldability associated with a good mechanical resistance and resistance to corrosion, allowing work under wet environments, such as the ones found in hot chambers and warehouse conditions, such as mould holders and Fasteners. It can also be used in moulds for non-chlorinated thermoplastic polymer injection, extrusion and blowing, with a low demand on polishability. Wear Resistance Nitriding Response Machinability Dimensional Stability

10 Cold Work Steel Similar ABNT ASTM SAE AISI DIN Wnr C Mn Cr Ni Mo W V OTHERS HRC Application Hardnesses APPLICATIONS VD2 D VF800ATIM Si= VC131 D VA2 (*) A Si= VND O , VW3 S , Si= VS7 (*) S Si= N2360M Si= Especially used in tools that demand a high wear resistance such as: dies for coining and stamping; thread rolling, spinning, lathe centers, punches, calipers. Cold work steel with an elevated toughness and wear resistance. Adequate for applications as screw-thread chasers and thread roller rolls, coining tools and dies for cutting and spinning. Steel of extreme dimensional stability of the type known as undeformable. Exceptional resistance to abrasion and maximum cutting stability. Used also for lining of ceramic moulds. Used for tools that demand a high wear resistance, such as dies for stamping, coining and spinning, thread rolling, lathe centers, punches and calipers. Cutting tools, especially taps, die chasers, broaches, punches, high yield blades for paper cutting, tools for working with wood; it is also indicated for guiding pins, rollers for thread rollers, stamps and dies in general, measuring instruments such as calipers, gauges and rulers. High hardness, high toughness steel, for tools that must withstand shocks and abrasion: metal chisels, pneumatic tools and punches for metal stamping. High hardness, high toughness steel, for tools that must withstand shocks and abrasion; metal chisels, pneumatic tools and punches for metal stamping. Its use is recommended for the manufacturing of high yield shearing blades for pulp, paper and MDF s. It is also recommended for the manufacturing of slitting or rotary knives for cutting operations of up to 15 mm thick sheets. * Steels sold upon inquiry, not available in stock. Wear Resistance Toughness Machinability VD2 VF800ATIM VC131 VA2* VND VW3 VS7 SINTER 23 SINTER 30 N2360M

11 Simplify with

12 Fevereiro/2012

MSE-226 Engineering Materials

MSE-226 Engineering Materials MSE-226 Engineering Materials Lecture-7 ALLOY STEELS Tool Steels TYPES of FERROUS ALLOYS FERROUS ALLOYS Plain Carbon Steels Alloy Steels Cast Irons - Low carbon Steel - Medium carbon steel - High carbon

More information

The Convenience Stores For Metal

The Convenience Stores For Metal TOOL STEEL SELECTOR GUIDE Application Suggested Grades Arbors... O1, A2, A6 Battering Tools... S5, S1, S7 Blacksmith Tools... S5, S1 Boiler-Shop Tools... S5, S1, S7 Bolt Clippers... S5, S1 Boring Tools...

More information

STEELS & COATINGS FOR CUTTING TOOL APPLICATIONS

STEELS & COATINGS FOR CUTTING TOOL APPLICATIONS STEELS & COATINGS FOR CUTTING TOOL APPLICATIONS Requirements for cutting tools There are several characteristics that are essential to the good performance of a cutting tool. Powder Metal High Speed Steels

More information

TOOL STEEL SUPER SQUARE HEAT TREATING Notes thru TOOL WRAP GRADE AVAILABILITY

TOOL STEEL SUPER SQUARE HEAT TREATING Notes thru TOOL WRAP GRADE AVAILABILITY TOOL STEEL COLD WORK TECHNICAL INFORMATION AISI A2... 14-2 AISI A6... 14-3 AISI D2... 14-4 AISI DC53... 14-5 AISI O1... 14-6 AISI O6... 14-7 AISI L6... 14-8 AISI S5... 14-9 AISI S7... 14-10 AISI S7 ESR...14-11

More information

CLASSIFICATION OF STEELS

CLASSIFICATION OF STEELS 7 Alloy Steels CLASSIFICATION OF STEELS low carbon

More information

Industeel. Steel Solutions for Plastic Moulding with Superplast

Industeel. Steel Solutions for Plastic Moulding with Superplast Industeel Steel Solutions for Plastic Moulding with Superplast Our corporate values The ArcelorMittal group is committed to «transforming tomorrow». At Industeel, we uphold four fundamental values that

More information

a h a l l m a r k o f q u a l i t y

a h a l l m a r k o f q u a l i t y Premium hot-work tool steels a h a l l m a r k o f q u a l i t y s u r v e y o f h o t - w o r k s t e e l s Martensitic steels AISI Reference analysis Assupplied C Si Mn Cr Mo Ni V Co W Nb condition HB

More information

special hot work tool steel CR7V-L

special hot work tool steel CR7V-L special hot work tool steel CR7V-L T h e p r e m i u m s t e e l w i t h m a x i m u m h i g h t e m p e r at u r e w e a r r e s i s ta n c e 2 From the casting of steel to finished die... LONG-STANDING

More information

Die Casting Tooling Grades

Die Casting Tooling Grades Die Casting Tooling Grades Including an introduction to Die Casting Specifications: NADCA 207-2003 NADCA 207-2006 R&D Research and development play a strategic role at Bohler-Uddeholm. We know that in

More information

Born from fire, made to endure MOULD STEELS TOOL STEELS FOR PLASTIC MOULDING

Born from fire, made to endure MOULD STEELS TOOL STEELS FOR PLASTIC MOULDING Born from fire, made to endure MOULD STEELS TOOL STEELS FOR PLASTIC MOULDING IN TODAY'S GLOBAL PRODUCTION OF PLASTIC PRODUCTS THERE ARE DIFFERENT TECHNOLOGICAL PROCESSES, AMONG WHICH THEY ARE THE MOST

More information

AISI D2 Cold work tool steel

AISI D2 Cold work tool steel T OOL STEEL FACTS AISI D2 Cold work tool steel Great Tooling Starts Here! This information is based on our present state of knowledge and is intended to provide general notes on our products and their

More information

Alro Steel. Tool & Die Steel. Handbook. A Helpful Guide to the Properties, Selection, & Heat Treatment of Tool Steels.

Alro Steel. Tool & Die Steel. Handbook. A Helpful Guide to the Properties, Selection, & Heat Treatment of Tool Steels. Alro Steel Metals Industrial Supplies Plastics Tool & Die Steel Handbook A Helpful Guide to the Properties, Selection, & Heat Treatment of Tool Steels. MISSION STATEMENT To ensure the long-term success

More information

Index. Air Hardening AISI A2 Air Hardening Tool Steel..1 2 AISI A6 Air Hardening Die Steel.3 4

Index. Air Hardening AISI A2 Air Hardening Tool Steel..1 2 AISI A6 Air Hardening Die Steel.3 4 Index Air Hardening AISI A2 Air Hardening Tool Steel..1 2 AISI A6 Air Hardening Die Steel.3 4 High Carbon High Chrome AISI D2 High Carbon High Chrome.5 7 AISI D3 High Carbon High Chrome.8 10 Shock Resisting

More information

AISI A2 Cold work tool steel

AISI A2 Cold work tool steel T OOL STEEL FACTS AISI A2 Cold work tool steel Great Tooling Starts Here! General AISI A2 is an air- or oil hardening chromiummolybdenum-vanadium alloyed tool steel characterized by: Good machinability

More information

Alloys SUPER SQUARE

Alloys SUPER SQUARE Alloys ETD 150...8-2 ETD 150 Rounds...8-2 AISI 4140/41L40 - Annealed...8-3 AISI 4140 - Annealed Flats And Squares... 8-4 thru 8-5 AISI 4140 - Annealed Rounds... 8-5 thru 8-6 AISI 4140 Rounds HR Q&T...8-7

More information

DC53. Rev o lu tion. Medium Chrome Tool Steel

DC53. Rev o lu tion. Medium Chrome Tool Steel DC53 Medium Chrome Tool Steel The High Performance Alternative for: Punches & Dies Draw & Form Dies Shear Blades Shredder Knives Thread & Form Rolls Cold Heading Dies Mill Rolls & Slitters Rev o lu tion

More information

A NEW SOLUTION FROM VILLARES METALS FOR EXTRUSION DIES. Better temper resistance (resistance to softening at elevated service temperatures);

A NEW SOLUTION FROM VILLARES METALS FOR EXTRUSION DIES. Better temper resistance (resistance to softening at elevated service temperatures); Villares Metals Is a Brazilian company providing solutions in long products made from high alloy steels and specialty alloys. Villares is part of the Special Steel Division of the voestalpine Group, based

More information

QRO 90 SUPREME Hot work tool steel

QRO 90 SUPREME Hot work tool steel T O O L S T E E L F A C T S QRO 90 Hot work tool steel Great Tooling Starts Here! Cover photo: Bo Dahlgren This information is based on our present state of knowledge and is intended to provide general

More information

EDELSTAHL WITTEN-KREFELD GMBH THYRAPID. Tool steels THYRAPID THYRAPID THYRAPID THYRAPID THYRAPID. High-Speed Steels

EDELSTAHL WITTEN-KREFELD GMBH THYRAPID. Tool steels THYRAPID THYRAPID THYRAPID THYRAPID THYRAPID. High-Speed Steels EDELSTAHL ITTEN-KREFELD GMBH Tool steels High-Speed Steels 3202 3207 3243 3245 3247 3341 3343 3344 3202 ode 1.3202 T 15 r o 1.35 0.8 3.8 12.0 4.8 Heavy-duty, high-speed steel grade with maximum cutting-edge

More information

MATERIALIZING VISIONS. Bohler-Uddeholm H13 TOOL STEEL

MATERIALIZING VISIONS. Bohler-Uddeholm H13 TOOL STEEL MATERIALIZING VISIONS Bohler-Uddeholm H13 TOOL STEEL Bohler-Uddeholm H13 General Bohler-Uddeholm H13 is a chromium-molybdenumvanadium alloyed steel which is characterized by: Good resistance to abrasion

More information

Mold Design. 12. Mold Materials. Bong-Kee Lee School of Mechanical Engineering Chonnam National University

Mold Design. 12. Mold Materials. Bong-Kee Lee School of Mechanical Engineering Chonnam National University 12. Mold Materials Bong-Kee Lee Chonnam National University Mold Materials easy toolmaking good performance during production good machining properties ease of hear treatment where hardening is required

More information

QRO 90 SUPREME. Hot work tool steel

QRO 90 SUPREME. Hot work tool steel QRO 90 SUPREME Hot work tool steel This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed

More information

Plate HARDWEAR Plate: Premium abrasion-resistant steels Introducing HARDWEAR 550F

Plate HARDWEAR Plate: Premium abrasion-resistant steels Introducing HARDWEAR 550F ArcelorMittal USA Plate HARDWEAR Plate: Premium abrasion-resistant steels Introducing HARDWEAR 55F Introduction HARDWEAR, a line of premium abrasion-resistant plate steels, is available in four grades

More information

Ferrous Alloys. Steels

Ferrous Alloys. Steels Ferrous Alloys Ferrous alloys those of which iron is the prime constituent are produced in larger quantities than any other metal type. They are especially important as engineering construction materials.

More information

Lecture 9 - Manufacturing in Engineering

Lecture 9 - Manufacturing in Engineering Introduction Dr. Carolyn Skurla Speaking Slide 2 Process Selection Choice depends on: The material from which the component is to be made. The size, shape, and dimension tolerances for the component. The

More information

Uddeholm Formvar. FORMVAR is a trade mark registered in the European Union

Uddeholm Formvar. FORMVAR is a trade mark registered in the European Union Uddeholm Formvar FORMVAR is a trade mark registered in the European Union UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright

More information

INTRODUCTION. Think HSS

INTRODUCTION. Think HSS INTRODUCTION Think HSS SUMMARY METALLURGY 2 Excellent strength 3 A super sharp edge 4 Safe and reliable tools Alloy elements 6 The influence of alloy elements 7 Standard compositions of HSS 8 The HSS-PM

More information

Review of Manufacturing Processes

Review of Manufacturing Processes Review of Manufacturing Processes ME 682 Dr. Han P. Bao Mechanical Engineering, ODU ME 682 Module 3 1 Engineering Materials The four major categories: Metal Plastics Ceramics Composites 1- Metals: Cast:

More information

1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION

1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION METALS: 1. METALS 2. FERRIC METALS 3. NON-FERRIC METALS 4. WORKING WITH METALS 5. METAL FORMING TECHNIQUES 6. ENVIRONMENTAL IMPACT OF METAL EXTRACTION 1. METALS: Metals are chemical elements found in nature

More information

Steel for plastic moulding

Steel for plastic moulding Steel for plastic moulding 02 CONTENTS Plastics an ever growing market Deutsche Edelstahlwerke the experts in steel for plastic moulding Process reliabilty from consultation through to the final product

More information

Increasing the Efficiency of Metalform Tooling for Advanced High Strength Steels

Increasing the Efficiency of Metalform Tooling for Advanced High Strength Steels Increasing the Efficiency of Metalform Tooling for Advanced High Strength Steels By: Brett Krause and Tom Bell of Bohler Uddeholm Corporation Introduction Information on Bohler Uddeholm Newly developed

More information

DAYE JINGCHENG MOULD CO., LTD TOOL STEEL PRODUCT

DAYE JINGCHENG MOULD CO., LTD TOOL STEEL PRODUCT 1.2343 Hot Work Tool Steel Identification Designation by Standards Mat. No. DIN EN AISI 1.2343 X38CrMoV51 X38CrMoV51 H11 Chemical Composition C Si Mn Cr Mo V P S 0.36 0.90 0.30 4.80 1.10 0.25 0.030 0.030

More information

The Convenience Stores For Metal

The Convenience Stores For Metal STEEL Data and Specifications 303 Chromium-nickel stainless steel with added sulfur or selenium and phosphorus to improve machinability and non-seizing properties. It is the most free machining of the

More information

TOOL AND DIE STEELS. Ameralloy -7 Ameralloy -13 Ameralloy -20 Amera-Mold Ameralloy -6 Ameralloy -FH Ameralloy High Speed-2 Ameralloy-T Durelloy-PM

TOOL AND DIE STEELS. Ameralloy -7 Ameralloy -13 Ameralloy -20 Amera-Mold Ameralloy -6 Ameralloy -FH Ameralloy High Speed-2 Ameralloy-T Durelloy-PM TOOL AND DIE STEELS Ameralloy Oil Ameralloy Air Ameralloy -0 Ameralloy D- Amera-Graf Ameralloy W & W Ameralloy Drill Rods Ameralloy Precision Flat Ground Ameralloy - Ameralloy -7 Ameralloy - Ameralloy

More information

Standard Specification for Stainless Steels for Surgical Instruments 1

Standard Specification for Stainless Steels for Surgical Instruments 1 Designation: F 899 02 Standard Specification for Stainless Steels for Surgical Instruments 1 This standard is issued under the fixed designation F 899; the number immediately following the designation

More information

Powder-Metal Processing and Equipment

Powder-Metal Processing and Equipment Powder-Metal Processing and Equipment Text Reference: Manufacturing Engineering and Technology, Kalpakjian & Schmid, 6/e, 2010 Chapter 17 Powder Metallurgy Metal powders are compacted into desired and

More information

CTS-XHP Alloy. Patent Number 5,370,750

CTS-XHP Alloy. Patent Number 5,370,750 CTSXHP Alloy Patent Number 5,370,750 Type Analysis Carbon 1.60% Chromium 16.00% Silicon 0.40% Molybdenum 0.80% Nickel 0.35% Vanadium 0.45% Manganese 0.50% Iron Balance Description CTSXHP alloy is an airhardening,

More information

OPEN-DIE MACHINED FORGINGS

OPEN-DIE MACHINED FORGINGS MACHINED FORGINGS SPECIFICATION SHEET Description Open-die machined forgings are a special part of SIJ Metal Ravne production program. Their aim is to improve the quality of products. Better quality means

More information

Powder Metallurgy. Powder-Metal Processing and Equipment 11/10/2009

Powder Metallurgy. Powder-Metal Processing and Equipment 11/10/2009 Powder Metallurgy Powder-Metal Processing and Equipment Metal powders are compacted into desired and often complex shapes and sintered* to form a solid piece * Sinter: To heat without melting Text Reference:

More information

PRELIMINARY BROCHURE. Uddeholm Vanadis 8 SuperClean

PRELIMINARY BROCHURE. Uddeholm Vanadis 8 SuperClean PRELIMINARY BROCHURE Uddeholm Vanadis 8 SuperClean UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information

More information

FSection F. Sheets and Plates. Plates. Plates and Sheets. Plates. Plates. Sheets and Plates

FSection F. Sheets and Plates. Plates. Plates and Sheets. Plates. Plates. Sheets and Plates FSection F HIGH STRENGTH LOW ALLOY STEELS HEAT TREATED CONSTRUCTIONAL ALLOY STEELS ABRASION RESISTING STEELS HIGH STRENGTH LOW ALLOY STEELS... 2-3 Sheets and Plates HEAT TREATED CONSTRUCTIONAL ALLOY STEELS...

More information

PRELIMINARY BROCHURE. Uddeholm Caldie

PRELIMINARY BROCHURE. Uddeholm Caldie PRELIMINARY BROCHURE Uddeholm Caldie UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without permission of the copyright holder. This information is based

More information

N/mm² N/mm² N/mm² N/mm²

N/mm² N/mm² N/mm² N/mm² Material Grades Material Grades Material no. 1.0577 S 355 J2 (St 52-3) A 52 FP A738 Indicatory analysis Strength haracter Application 0.22 0.55 1.60 550 N/mm² Structural steel unalloyed, with good weldability

More information

Leader in superior tooling solutions ASSAB AUTOMOTIVE CONCEPT

Leader in superior tooling solutions ASSAB AUTOMOTIVE CONCEPT Leader in superior tooling solutions ASSAB AUTOMOTIVE CONCEPT About ASSAB ASSAB was formed in 1945 to market high quality tool steel from Sweden, renowned for its remarkable standards. Headquartered in

More information

Chapter 14: Metal-Forging Processes and Equipments

Chapter 14: Metal-Forging Processes and Equipments Manufacturing Engineering Technology in SI Units, 6 th Edition Chapter 14: Metal-Forging Processes and Equipments Chapter Outline Introduction Open-die Forging Impression-die and Closed-die Forging Various

More information

Selection of Tool & Die Steels

Selection of Tool & Die Steels Selection of Tool & Die Steels Introduction The success of a metal forming tool depends on optimizing all the factors affecting its performance. Usually, operating conditions (applied loads, abrasive environments,

More information

Impact 7 Steel. A Durable, Dependable Steel Solution For Harsh Environments. Technical Data. Alloy Description. Alloy Type. Typical Applications

Impact 7 Steel. A Durable, Dependable Steel Solution For Harsh Environments. Technical Data. Alloy Description. Alloy Type. Typical Applications Impact 7 Steel Technical Data A Durable, Dependable Steel Solution For Harsh Environments Alloy Description As a world leader in steel manufacturing, TimkenSteel specializes in providing custom steel solutions

More information

Uddeholm Vanax SuperClean. Uddeholm Vanax SuperClean

Uddeholm Vanax SuperClean. Uddeholm Vanax SuperClean Uddeholm Vanax SuperClean 1 Vanax is a trade mark registered in the European Union and in the U.S. UDDEHOLMS AB No part of this publication may be reproduced or transmitted for commercial purposes without

More information

11.3 The alloying elements in tool steels (e.g., Cr, V, W, and Mo) combine with the carbon to form very hard and wear-resistant carbide compounds.

11.3 The alloying elements in tool steels (e.g., Cr, V, W, and Mo) combine with the carbon to form very hard and wear-resistant carbide compounds. 11-2 11.2 (a) Ferrous alloys are used extensively because: (1) Iron ores exist in abundant quantities. (2) Economical extraction, refining, and fabrication techniques are available. (3) The alloys may

More information

Special Steels for Precise Die and Mold

Special Steels for Precise Die and Mold DURO for Cold Work Special Steels for Precise Die and Mold R For Cold Work High Toughness Grades High Wear Resistance Grade DURO-Created by NACHI s original technology Steels with superior balance of toughness

More information

Martensitic Stainless Steels - a hidden champion?!

Martensitic Stainless Steels - a hidden champion?! Martensitic Stainless Steels - a hidden champion?! International Stainless & Special Steel Summit 2015 Vienna Marc André Müller BGH Edelstahlwerke GmbH Outline BGH Edelstahlwerke GmbH Martensitic Stainless

More information

VANADIS 10 SuperClean High performance powder metallurgical cold work tool steel

VANADIS 10 SuperClean High performance powder metallurgical cold work tool steel SuperClean High performance powder metallurgical cold work tool steel Critical tool steel properties for GOOD TOOL PERFORMANCE Correct hardness for the application Very high wear resistance Sufficient

More information

UDDEHOLM VIDAR 1 ESR

UDDEHOLM VIDAR 1 ESR UDDEHOLM VIDAR 1 ESR This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty

More information

Chapter 14 Forging of Metals

Chapter 14 Forging of Metals Introduction Chapter 14 Forging of Metals Alexandra Schönning, Ph.D. Mechanical Engineering University of North Florida Figures by Manufacturing Engineering and Technology Kalpakijan and Schmid What is

More information

MATERIALIZING VISIONS. Bohler-Uddeholm M42 HIGH SPEED STEEL

MATERIALIZING VISIONS. Bohler-Uddeholm M42 HIGH SPEED STEEL MATERIALIZING VISIONS Bohler-Uddeholm M42 HIGH SPEED STEEL General Cobalt-alloyed, molybdenum high speed steel possessing high hardness, excellent cutting properties, exceptional compressive strength,

More information

F O R G E D R O L L S

F O R G E D R O L L S FORGED ROLLS Perfect quality, excellent service and building a long-term partnership this is who we are the SIJ Ravne Systems, your reliable partner. WHY SIJ RAVNE SYSTEMS? Unique combination of metallurgical

More information

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two

More information

Plastic Molding Applications

Plastic Molding Applications Plastic Molding Applications Plastic Injection Molding Comprehensive Product Range Böhler-Uddeholm mold steel grades have been developed specifically to meet the demanding requirements of the plastics

More information

UDDEHOLM NIMAX. Nimax is a trade mark registered in the European Union and in the U.S.

UDDEHOLM NIMAX. Nimax is a trade mark registered in the European Union and in the U.S. UDDEHOLM NIMAX Reliable and efficient tool steel is essential for good results. The same goes for achieving high productivity and high availability. When choosing the right steel many parameters must be

More information

2890 Ligonier St. Latrobe, PA Phone Fax Toll Free

2890 Ligonier St. Latrobe, PA Phone Fax Toll Free Your Best Choice For Carbide Components 2890 Ligonier St. Latrobe, PA 15650 Phone 724.532.3041 Fax 724.532.3043 Toll Free 800.862.7066 www.extramet.net OUR HISTORY OUR MISSION Extramet s Primary Objective

More information

Vanax SuperClean. Uddeholm Vanax SuperClean

Vanax SuperClean. Uddeholm Vanax SuperClean Vanax SuperClean Uddeholm Vanax SuperClean ASSAB is a trademark of voestalpine High Performance Metals Pacific Pte Ltd. The information contained herein is based on our present state of knowledge and is

More information

Uddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance.

Uddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance. UDDEHOLM DIEVAR Uddeholm Dievar is a specially developed steel grade by Uddeholm, which provides the best possible performance. The chemical composition and the very latest in production technique make

More information

Product Information DSC inox

Product Information DSC inox Product Information DSC inox EN Datasheet DSC inox DSC - Damascus Steel SuperClean ferritic-martensitic compound Steel Etch Color C Si Mn Cr Mo V N Co Ni Nitro-B dark 0.50 0.60 0.50 14.80 0.60 0.12 0.15-0.20-0.0

More information

INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION

INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION METALS INDEX METALS FERRIC METALS NON-FERRIC METALS WORKING WITH METALS METAL FORMING TECHNIQUES ENVIRONMENTAL IMPACT OF METAL EXTRACTION METALS CHEMICAL ELEMENTS FOUND IN NATURE IN SOLID STATE AT ROOM

More information

Ferrous Alloys. Metal Alloys. Ferrous. Non ferrous. Grey iron. Carbon Low Alloy High Alloy. Nodular iron White iron Malleable iron Alloy cast irons

Ferrous Alloys. Metal Alloys. Ferrous. Non ferrous. Grey iron. Carbon Low Alloy High Alloy. Nodular iron White iron Malleable iron Alloy cast irons Metal Alloys Most engineering metallic materials are alloys. Metals are alloyed to enhance their properties, such as strength, hardness or corrosion resistance, and to create new properties, such as shape

More information

Leadership in Soft Magnetic Alloys

Leadership in Soft Magnetic Alloys Leadership in Soft Magnetic Alloys Carpenter Technology Corporation offers a wide selection of soft magnetic alloys to meet your material specifications. Choose from high permeability alloys, shielding

More information

Five Steps to Improving Die Performance

Five Steps to Improving Die Performance Five Steps to Improving Die Performance North American Die Casting Association Innovation Integrity Accessibility Reliability Five Steps to Improving Die Performance One of the myths that still affect

More information

MOLD BASE PRODUCT FEATURES

MOLD BASE PRODUCT FEATURES MOLD BASE PRODUCT FEATURES A SERIES Designed for through pocket machining. T SERIES Features an "X" and "Y" stripper plate available in variable plate thicknesses. B SERIES Suited for blind pockets without

More information

Steel Forgings: Design, Production, Selection, Testing, and Application. Edward G. Nisbett. ASTM Stock No. MNL53

Steel Forgings: Design, Production, Selection, Testing, and Application. Edward G. Nisbett. ASTM Stock No. MNL53 Steel Forgings: Design, Production, Selection, Testing, and Application Edward G. Nisbett ASTM Stock No. MNL53 INTERNATIONAL Standards Worldwide ASTM International 100 Barr Harbor Drive PO Box C700 West

More information

CUTTING TOOL TECHNOLOGY

CUTTING TOOL TECHNOLOGY CUTTING TOOL TECHNOLOGY Tool Life Tool Materials Tool Geometry Cutting Fluids Cutting Tool Technology Two principal aspects: 1. Tool material 2. Tool geometry Three Modes of Tool Failure Fracture failure

More information

Committed to total customer satisfaction.

Committed to total customer satisfaction. Committed to total customer satisfaction. Dear Friends, Welcome to our new and greatly improved buyers guide and reference book. We ve expended a great deal of time and energy to make this more than just

More information

Types of manufacturing processes

Types of manufacturing processes Materials processing Metal parts undergo sequence of processes Primary alter the ( raw ) material s basic shape or form. Sand casting Rolling Forging Sheet metalworking Types of manufacturing processes

More information

HSS rolled. HSS ground. HSS Co 5 ground. HSS-TiN ground. Twist drills DIN 338 type N. Point cuts:

HSS rolled. HSS ground. HSS Co 5 ground. HSS-TiN ground. Twist drills DIN 338 type N. Point cuts: Twist drills DIN 338 type N High performance twist drill suitable for all normal drilling in conventional materials. Point cut: helical point Helix angle: 20-30 tolerance: h8 Right-hand cutting 1,0 up

More information

NORRIS. Drive Rods. Engineered performance. Designed tough.

NORRIS. Drive Rods. Engineered performance. Designed tough. NORRIS Drive Rods Engineered performance. Designed tough. 1 (25,4 mm) Norris Drive Rods with 7/8 (22,23 mm) fullsize couplings Tubing size Improvement 27/8 (73,0 mm) 37% improvement in flow area when compared

More information

UDDEHOLM ORVAR SUPREME

UDDEHOLM ORVAR SUPREME UDDEHOLM ORVAR SUPREME Uddeholm Orvar Supreme can be regarded as an all-round steel used in several application areas. Except for hot work application areas the steel is also used in moulds for plastics

More information

Bulk Deformation Processes

Bulk Deformation Processes Bulk Deformation Processes Bachelor of Industrial Technology Management with Honours Semester I Session 2013/2014 TOPIC OUTLINE What is Bulk Deformation? Classification of Bulk Deformation Processes Types

More information

Uddeholm AM Corrax. Uddeholm AM Corrax

Uddeholm AM Corrax. Uddeholm AM Corrax Uddeholm AM Corrax Uddeholm AM Corrax Uddeholm AM Corrax is a stainless steel made for Additive Manufacturing with a unique set of properties making it the ultimate choice for tools where superior corrosion

More information

Edition 5, The latest revised edition of this brochure is the English version, which is always published on our web site

Edition 5, The latest revised edition of this brochure is the English version, which is always published on our web site UDDEHOLM SVERKER 3 This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty

More information

RA17-4 stainless. Introduction

RA17-4 stainless. Introduction RA17-4 stainless Introduction RA17-4 is an age-hardening martensitic alloy combining high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short-time, simple lowtemperature

More information

RAMAX 2. Prehardened stainless holder steel

RAMAX 2. Prehardened stainless holder steel RAMAX 2 Prehardened stainless holder steel This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be

More information

1. Plastic products that are formed into a permanent shape by heat and pressure and may not be altered after curing are produced by which process?

1. Plastic products that are formed into a permanent shape by heat and pressure and may not be altered after curing are produced by which process? Student Name: Teacher: Date: District: Rowan Assessment: 9_12 T and I IV22 - Drafting - Engnrng II Test 1 Description: Unit C - Manufacturing 1 Form: 501 1. Plastic products that are formed into a permanent

More information

UDDEHOLM QRO 90 SUPREME

UDDEHOLM QRO 90 SUPREME UDDEHOLM QRO 90 SUPREME This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as a warranty

More information

COPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds

COPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6

More information

Producing Metal Parts

Producing Metal Parts Producing Metal Parts CNC vs. Additive Manufacturing www.3dhubs.com METAL KIT 2 Introduction This Kit discusses how to select the right manufacturing process for metal parts by comparing CNC and Additive

More information

TOOLOX in plastic moulding applications. Per Hansson SSAB Plate

TOOLOX in plastic moulding applications. Per Hansson SSAB Plate TOOLOX in plastic moulding applications Per Hansson SSAB Plate Yield Strength, R p0.2 (MPa) Hardness (HBW) 1600 600 1400 1200 500 1000 400 800 300 WELDOX 700 WELDOX 800 WELDOX 900 WELDOX 960 WELDOX 1030

More information

1 Cutting Tool Materials of common use

1 Cutting Tool Materials of common use 1 Cutting Tool Materials of common use Instructional Objectives At the end of this lesson, the students will be able to (i) Identify the needs and cite the chronological development of cutting tool materials.

More information

WIRE SIZE HUTCHINSON HSS BLANKS

WIRE SIZE HUTCHINSON HSS BLANKS DRILL & REAMER BLANKS WIRE SIZE HUTCHINSON HSS BLANKS Wire Decimal Overall Net Price Net Price Size Equivalent Inches Each Each 1.2280 3 7 /8 2.2210 3 7 /8 3.2130 3 3 /4 4.200 3 3 /4 5.2055 3 3 /4 6.2040

More information

Cutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba

Cutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba Cutting Tool Materials and Cutting Fluids HomeWork #2 22.37 obtain data on the thermal properties of various commonly used cutting fluids. Identify those which are basically effective coolants and those

More information

Metal Forming Process. Prof.A.Chandrashekhar

Metal Forming Process. Prof.A.Chandrashekhar Metal Forming Process Prof.A.Chandrashekhar Introduction Shaping of a component by the application of external forces is known as the metal forming. Metal forming can be described as a process in which

More information

TOOL ROOM FOR SHEET METAL DIES

TOOL ROOM FOR SHEET METAL DIES Profile No.: 28 NIC Code: 24209 TOOL ROOM FOR SHEET METAL DIES 1. INTRODUCTION: Sheet metal forming processes are complex and have interaction several parameters of material like geometry, surface topology,

More information

Resource Guide. Section 3: Ductile Iron

Resource Guide. Section 3: Ductile Iron Resource Guide Section 3: Ductile Iron Section 3 Ductile Iron Description of Grades... 3-3 65-45-12 Ferritic... 3-4 80-55-06 Partially Pearlitic... 3-6 100-70-02 Pearlitic... 3-8 4512 HRDS Heat Resistant...

More information

The Market Leader of Alloy Steels in Pakistan

The Market Leader of Alloy Steels in Pakistan The Market Leader of Alloy Steels in Pakistan COMPANY PROFILE Peoples Steel Mills Ltd., a world class alloy and special steel manufacturing plant located in Manghopir Karachi and spread over an area of

More information

Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements 1

Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements 1 Designation: A 304 04 An American National Standard Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements 1 This standard is issued under the fixed designation

More information

Saving time to market.

Saving time to market. A better concept. Saving time to market. Ready to use TOOLOX is a modern quenched and tempered prehardened tool and machine steel, delivered with measured and guaranteed mechanical properties. The basic

More information

2

2 1 2 3 4 5 6 7 Direct -Straightforward steady forward force by hydraulic ram Indirect -Has the advantage that there is no friction between billet and chamber (no movement) -Note dummy block at face of ram

More information

Sistemska tehnika FORGED PRODUCTS FOR ALUMINIUM INDUSTRY

Sistemska tehnika FORGED PRODUCTS FOR ALUMINIUM INDUSTRY Sistemska tehnika FORGED PRODUCTS FOR ALUMINIUM INDUSTRY ST shells for continous strip casting Shells for continuous casting produced by Sistemska tehnika enable optimal casting speeds, maximal casted

More information

PSection P. Sec. P Page 1

PSection P. Sec. P Page 1 PSection P CHEMICAL ANALYSES OF STANDARD SIZES STANDARD METALS AND DESIGNATION SYSTEMS... 2 EFFECTS OF COMMON ALLOYING ELEMENTS IN STEEL....... 3-4 DESIGNATION OF CARBON STEELS........................

More information

STANDARD STEELS STANDARD STEELS 403

STANDARD STEELS STANDARD STEELS 403 STANDARD STEELS 403 STANDARD STEELS Standard Steels Compositions, Applications, and Heat Treatments Steel is the generic term for a large family of iron carbon alloys, which are malleable, within some

More information

UDDEHOLM RAMAX LH. Uddeholm Ramax LH is a part of the Uddeholm Stainless Concept.

UDDEHOLM RAMAX LH. Uddeholm Ramax LH is a part of the Uddeholm Stainless Concept. UDDEHOLM RAMAX LH TAKING STANDARDS TO A NEW LEVEL Setting standards is important in the tooling industry. Uddeholm Ramax LH is no exception. It is a first class tool steel for mould bases, with excellent

More information