CONFERENCE PROGRAMME

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "CONFERENCE PROGRAMME"

Transcription

1 TURKEYTRIB 18 2 nd INTERNATIONAL CONFERENCE ON TRIBOLOGY April 2018 Elite World Prestige Hotel TAKSIM ISTANBUL TURKEY CONFERENCE PROGRAMME April 18-20, 2018 Istanbul TURKEY TURKEYTRIB'18 is organized by Ecovario Technology Company, Istanbul TURKEY

2 SPONSORS:

3 Welcome to TURKEYTRIB 18 Please Welcome and thanks for your contribution to TURKEYTRIB 18 which will be held from 18 to 20 April 2018 at the Elite World Prestige Hotel Taksim-Istanbul- TURKEY. TURKEYTRIB 18 is organized by Ecovario Technology Company Istanbul-TURKEY. TurkeyTrib 18 mainly focuses on Tribology and wide range of branches related to tribology. More than 110 presentations have been accepted for Conference from several countries. The organization committee would like to thank all those who have helped in making the Conference better. It was a great pleasure for us to bring together specialists, research scientists and industrial technology developers together. TURKEYTRIB 18 is expected to stimulate new ideas and concepts, promoting further advances in the field of tribology. I wish all participants a pleasant stay in the magnificent city of Istanbul and I am looking forward to seeing you all together at the Second International Conference on Tribology probably in TURKEYTRIB 20. CONFERENCE LINK: There is Gala dinner on April 19 th Gala dinner will be free only for participants who paid registration fee. İstanbul April, 2018 Professor Dr. Hakan KALELİ Conference Chairman

4 International Scientific Committee Conference Chairman Prof. Dr. Hakan KALELİ, Turkey Members: Prof. Dr. Ali ERDEMIR, USA Prof. Dr. Bharat BHUSHAN, USA Prof. Dr. Dae-Eun KIM, South Korea Prof. Dr. Valentin POPOV, Germany Prof. Dr. Adrian RIENACKER, Germany Prof. Dr. Josef SCHLATTMANN, Germany Prof. Dr. Hüseyin ÇİMENOĞLU, Turkey Prof. Dr. Gençağa PÜRÇEK, Turkey Prof. Dr. Ertuğrul DURAK, Turkey Prof. Dr. Benyebka BOU-SAID, France Prof. Dr. Lorena DELEANU, Romania Prof. Dr. Ripa MINODORA, Romania Prof. Dr. Emilia ASSENOVA, Bulgaria Prof. Dr. Mara KANDEVA, Bulgaria Prof. Dr. Aleksandar VENCL, Serbia Prof. Dr. Anne NEVILLE, UK Prof. Dr. Jeng-Haur HORNG, Taiwan Prof. Dr. Yeau-Ren JENG, Taiwan Prof. Dr. Filiz KARAOSMANOĞLU, Turkey Prof. Dr. Beliardouh NASSEREDDINE, Algeria Prof. Mohamed EL MANSORI, France Prof. Dr. Maher DAMMAK, Tunisia Prof. Dr. Slobodan MITROVIC, Serbia Prof. Dr. M. F. WANI, India Assc. Prof. Dr. Eyyup GERÇEKÇİOĞLU, Turkey Asst. Prof. Dr. Övün IŞIN, Turkey Asst. Prof. Dr. Levent YÜKSEK, Turkey Asst. Prof. Dr. Zeynep PARLAR, Turkey Asst. Prof. Dr. Oday I. ABDULLAH, Iraq Dr. Yves BERTHIER, France Dr. Sylvie DESCARTES, France

5 Programme 08:00-09:20 Registration (Plenary and Keynote speakers have 25 minutes, 5mns for questions. Technical presentations will take 10 mns of speech time and 5 mns of questions). WEDNESDAY, 18 April 2018, 09:30-10:30, Plenary Speaker Session (PLE) : Conference Chairman: Prof. Dr. Hakan Kaleli 09: OPENING: Conference Chairman: Prof. Dr. Hakan Kaleli 09:30-10:00 Prof. Dr. Dae-Eun Kim-The Concept of Surface Compliance Control for Wear Reduction 10:00-10:30 Prof. Dr. Valentin Popov-Adhesive Wear and Particle Emission: Old Concepts and New Advancements WEDNESDAY, 18 April 2018, 10:30-12:30, Keynote Speaker Session (PLE) Conference Chairman: Prof. Dr. Hakan Kaleli 10:30-11:00 Prof. Dr. Adrian Rienacker-Tribology in Automotive Applications 11:00-11:30 Prof. Jeng-Haur Horng-Stribeck Curve In Three-Body Contact Condition 11:30-12:00 Dipl.-Ing. Rudolf Zechel-Kluber Lubrication- New Innovative Assessment For Tribological Performance Of Bonded Coatings: 4D Matrixes BC 12:00-12:30 Matthias Pfadt, M. Sc.-Kluber Lubrication- Hydro Lubricants: Opportunities For Future Specialty Lubricants By The Use Of Water 12:30-12:35 GROUP PHOTO 12:35-13:30 LUNCH WEDNESDAY, 18 April 2018, 13:30-15:15 Lubrication and Lubricants, Session Chairman: Prof. Dr. Lorena DELENAU 13:30-13:45 Lorena Delenau-Texture Investigation of Scars Resulted from Lubrication with Soybean Oil Additivated with Nanographite 13:45-14:00 Oday I. Abdullah-The Elastohydrodynamic lubrication of Cam and Chamfered Flat Faced Follower 14:00-14:15 Ilya Kudish-Stressed State of Functionally Graded Elastic Solids Involved in Heavily Loaded Lubricated Contacts 14:15-14:30 Nurin Wahidah Mohd Zulkifli-Dispersion of Graphene in Various Bio-Based Lubricant and Its Effect on Tribological Properties 14:30-14:45 Lorena Delenau-Tribological Behavior of Soybean Oil with Nano Carbon as Additive 14:45-15:00 Binnur Sağbaş-Tribological Performance of PEEK with Green Lubricant Enhanced by Nano Hexagonal Boron Nitride Powder 15:00-15:15 Ali Usman-Numerical Investigation of Adiabatic Thermo-Tribological Performance of Piston Skirt Liner Lubrication at High Engine Speeds 15:15-15:45 Coffee Break / Poster Session 1

6 WEDNESDAY, 18 April 2018, 15:45-17:45 Coating Tribology; Session Chairman Assist. Prof. Senai YALÇINKAYA 15:45-16:00 Bahattin İşcan-Thermal Stress Analysis and Mathematical Applications in Engine Piston with Ceramic Coating 16:00-16:15 Bahattin İşcan-Engine operation and thermal stress in a ceramic coated LHR diesel engine 16:15-16:30 Mustafa Safa Yılmaz-Effect of Electrical Parameters on Tribology of Micro Arc Oxidation (MAO) Coatings Formed on Aluminium 16:30-16:45 Sepideh Pourhashem-Comparing the Corrosion Protection Performance of Graphene Nanosheets and Graphene Quantum Dots as Nanofiller in Epoxy Coatings 16:45-17:00 Zeynep Burcu Acunaş Karagöz-Review of Tribological Behavior of Graphene Coatings on Piston Rings in Engines 17:00-17:15 Salih Akbar Zadeh-Numerical and experimental study of the wear behavior of nano TiN coating on steel substrate 17:15-17:30 Binnur Sağbaş-Metrological Characterisation of Metallic Implant Surfaces Coated by Electron Beam Deposition of Bioglass 17:30-17:45 Mun Hee Lee-Experimental Study of Y-jet Nozzle in Oil Burner Development WEDNESDAY, 18 April 2018, 13:30-15:00 Nanotribology; Session Chairman Asst. Prof. Dr. Amir MOTALLEBZADEH (Room B-Nilüfer, -3rd floor) 13:30-13:45 Amir Motallebzadeh-Nanotribological Characteristics of Laser Surface Melted Stellite 12+Mo Deposits 13:45-14:00 Fellah Mamoun-Tribological behaviour of Nanostructured β-ti alloys as a function of Mo at.% content 14:00-14:15 Mahsan AfzaliTabar-Comparsion of Nanoporous graphene/silica with Activated carbon/silica nanohybrids Pickering emulsions for Chemical Enhanced Oil Recovery (C-EOR) 14:15-14:30 Saša Milojević-Influence ferrous based reinforcements on tribological parameters of aluminum cylinder for piston compressor in brake system of bus 14:30-14:45 Volkan Baydaroğlu-Effect of reinforcement ratios on mechanical properties and wear behavior of B4C + SiC reinforced AA 7075 composites 14:45-15:00 Zeynep Burcu Acunaş Karagöz-Study of Tribological behavior of BN and DLC nano coatings on Piston Rings 15:00-15:30 Coffee Break / Poster Session 2 WEDNESDAY, 18 April 2018, 15:30-17:45 Friction and Wear; Session Chairman Prof. Dr. Gençağa PÜRÇEK (Room B-Nilüfer, -3rd floor) 15:30-15:45 Harun Yanar -Effect of Resin Content on Friction and Wear Behaviour of Non-Asbestos Composite Friction Material Used in Brake Pad 15:45-16:00 Oday I. Abdullah-Thermal Stresses Analysis of a Dry Friction Clutches 16:00-16:15 Oday I. Abdullah-Analytical Simulation of Frictional Heat Generated in the Friction Clutches Using MATLAB GUI 16:15-16:30 H. Tarik Baytekin-How electrostatic tribocharging does effect friction coefficient? 16:30-16:45 Muhammad Khafidh-Friction and Wear Mechanism of Short-cut Aramid Fiber Reinforced Elastomers 16:45-17:00 Salih Akbar Zadeh- Experimental and Numerical Prediction of Friction Coefficient in Line and Point Contact in the Presence of Lubricant 17:00-17:15 Kareem Abd Rbo-Effect of Surface Texturing on the Friction of Rubber in Lubricated Sliding Contact. Application in Medical Syringes 17:15-17:30 Harun Yanar-A New Multi-Functional Tribometer: Application of Block-on-Ring Test Module 17:30-17:45 Reza Tikani-Vibration Analysis of a Flexible Rotor Supported by Squeeze Film Dampers Using Finite Element Method

7 THURSDAY, 19 April 2018, 09:00-09:30 Conference Chairman Prof. Dr. Hakan KALELİ Keynote Speaker Session 09:00-09:30 MSc, Mech. Eng. Ahmet GÜVEN-Shell Co-TURKEY-Mobile Hydraulics THURSDAY, 19 April 2018, 09:30-10:30 TriboCorrosion, Roughness and Wear; Session Chairman Prof. Dr. Beliardouh NASSEREDDINE 09:30-09:45 Ali Ghanbarzadeh-A Parametric Study of the Newly-Proposed Asperity-Scale Tribocorrosion Model 09:45-10:00 Ali Çulha-Effect of Shot Peening Parameters on Surface Roughness of Inconel :00-10:15 Ali Çulha-Erosive Wear Behaviour of Shot Peened Inconel :15-10:30 Qiang Li-Wear Analysis of Multiphasic Heterogeneous Composites 10:30-11:00 Coffee Break / Poster Session 3 THURSDAY, 19 April 2018, 11:00-12:00 Composites, Material, Bearings; Session Chairman Asst. Prof. Dr. Zeynep PARLAR 11:00-11:15 İsmail Kaya-The Investigation of Tribological Behavior of Carbon-Fiber Reinforced Composite Materials 11:15-11:30 Ömer Özdemir-Thermo-Elastohydrodynamic Simulation of the Piston-Cylinder Contact in High-Pressure Pumps at 3000 bar 11:30-11:45 Atae Jafari-Tabrizi-Interferometric Measurements of Shaft Position in a Dynamically Loaded Journal Bearing 11:45-12:00 Ali Usman-Numerical Study of Surface Modification-based Improved Tribological Performance of Plain Bearing 12:00-14:00 LUNCH THURSDAY, 19 April 2018, 09:30-10:30 Fundamentals of Friction and Wear-Contact Mechanics-Tribotesting; Session Chairman Prof. Dr. Christian Busch, (Room B-Nilüfer, -3rd floor) 09:30-09:45 Prof. Dr. Christian Busch-Mobile into old age 09:45-10:00 Ali Abdul Munim Alhattab-Effect of Electron Beam Surface Melting on Microstructure and Wear Behaviour of PTA Deposited Stellite 12 Hardfacing 10:00-10:15 Faiz Muhaffel-Influence of Thermal Oxidation Time on Tribology Behaviour of Ti6Al4V Alloy 10:15-10:30 Abdullah Göçer-The Effects Of B4c Ceramic Sizes On Wear Behavior Of Al 6063metal Matrix Composites 10:30-11:00 Coffee Break THURSDAY, 19 April 2018, 11:00-13:00 Fundamentals of Friction and Wear- Contact Mechanics- Tribotesting Session Chairman Prof. Dr. BOUZIDI NEDJIMA, (Room B-Nilüfer, -3rd floor) 11:00-11:15 Bouzidi Nedjima-Porous ceramics at high temperatures as filters: microstructure and mechanical properties 11:15-11:30 Gülşah Akıncıoğlu-Investigation of friction wear performance of boron oxide added brake pads sample 11:30-11:45 Gülşah Akıncıoğlu-Evaluation of tribological properties of eco-friendly brake pad added hazelnut shell dust 11:45-12:00 Okan Gül-Effects of Basalt Fiber and Boron Oxide Hybrid Addition on Adhesive Wear and Thermomechanical Properties of TPE Matrix Composites 12:00-12:15 Okan Gül-Zeolite and Carbon Fiber Reinforced PPS Matrix Hybrid Composites: Tribological and Thermomechanical Properties

8 12:15-12:30 Okan Gül-Investigation the Tribological and Thermomechanical Properties of Bentonite and Basalt Fiber Reinforced PPS Matrix Composites 12:30-12:45 Demchi Farouk-Polyvinyl alcohol, a new way for efficient redox coating process from saponification of polyvinyl acetate 12:45-13:00 Ahmet Yavuz-Importance Of Solid Particle Erosion In Industrial Areas 13:00-14:15 LUNCH THURSDAY, 19 April 2018, 14:15-16:15 Lubricants, Session Chairman Assoc. Prof. Dr. Mohd Fadzli Bin Abdollah (Room B-Nilüfer, -3rd floor) 14:15-14:30 Mohd Fadzli Bin Abdollah-Physical properties of biodiesel from vegetable oil 14:30-14:45 Noreffendy Tamaldin-Growth of graphene from solid waste products 14:45-15:00 Gökçe Mehmet AY-A Treatise On Using Hexagonal Boron Nitride For Space Lubrication Applications 15:00-15:15 Gökçe Mehmet AY-Ultrasonic Assisted Machining Methods: A Review From :15-15:30 Gökçe Mehmet AY-Investigation The Effects Of Ultrasonic Assisted Turning On Surface Properties Of Ti6al4v Alloy 15:30-15:45 Salih Akbar Zadeh-Two-body and Three-body Wear of Nickel-Titanium Shape Memory Alloy 15:45-16:15 Coffee Break/ Poster Session 4 THURSDAY, 19 April 2018, 16:15-18:00 Surface, Coating, Wear, Tools; Session Chairman Assist. Prof. Senai YALÇINKAYA (Room B-Nilüfer, -3rd floor) 16:15-16:30 Senai Yalçınkaya-Plane Surface Grinding Implementation of Experimental Design and Optimal Solutions with the Taguchi Method 16:30-16:45 Senai Yalçınkaya-A research for Wear Behaviours of Coated Cutting Tools: A Mini Review 16:45-17:00 Faiz Muhaffel-Structure and Tribological Properties of Fluidized Bed Nitrided Surfaces on H13 Hot Work Tool SteelSTAMPING DIE WEAR INVESTIGATION WITH DIFFERENT HARD-COATINGS 17:00-17:15 Faiz Muhaffel-Synthesis of an Antibacterial and Wear-resistant Multilayer Coating on Biomedical Titanium-based alloys 17:15-17:30 Badr Azzam-Performance Evaluation Of Wind Turbine Blades Coated With Composite Materials 17:30-17:45 Abdullah Sert-Investigation on Tribological Behavior of Laser Surface Treated Ti6Al4V Alloy 17:45-18:00 Abdullah Sert-Tribological And Finite Element Study on The Elastic Behaviour of A Steel Sphere Against A Deformable Flat Material April 19, 2018 Thursday-Elite World Hotel Prestige 19:30-23:30 GALA DINNER April 20, 2018 Friday, :15 Fundamentals of Friction and Wear- Contact Mechanics- Tribotesting Session Chairman- Prof. Dr. Harun MİNDİVAN, (Room B-Nilüfer, -3rd floor) 09:30-09:45 Harun Mindivan-Tribocorrosion Behavior of Electroless Ni-P/Ni-B Duplex Coating on AA7075 Aluminum Alloy 09:45-10:00 Selman Demirtaş-Characterization of the Friction and Wear Effects of Graphene Nanoparticles in Oil on the Ring/Cylinder Liner of Internal Combustion Engine 10:00-10:15 Murat Kıyak-Applications of Cutting Fluids on Machining 10:15-10:45 Coffee Break 10:45-11:00 Hani Abdallah AL-Rawashdeh-Comparison between Selection Methods of Genetic Algorithm used in Scheduling Problems (FSP) 11:00-11:15 Selman Demirtaş-Tribotest of Engine Piston Ring/Cylinder Liner Pairs With Different Nanoparticles Added into Engine Oil END OF CONFERENCE

9 POSTER SESSIONS April 18, 2018 Elite World Prestige Hotel, Taksim-Istanbul-TURKEY Poster Session 1 15:15 15:45 Brahim Bourouga-Numerical Study of the Behavior of the Contact Parameters at a Solid-Solid Planar Interface under Increasing Loading Keraghel Fatiha -Study Of The Wear Of A Sintered Bronze Keraghel Fatiha-Wear Resistance Of a Bronze Cu10% Sn Keraghel Fatiha-Tribological Study Of Sintered Cu-Sn Powders Mamoun Fellah-Friction and Wear Behaviour Of Milled Titanium Alloys Ti-6Al-7Nb as Function of Milling Time Mamoun Fellah-Structural and Tribological Properties of Calcined Nano-Ceramic α Alumina (α-al2o3) for Biomedical Applications Hammadi Fouzia-Mechanical and Tribological Properties of Ti -6Al-xFe Alloy Linda Aissani-Effect of Zr on the Properties Of Chromium Nitride Thin Films Produced by R.F Magnetron Sputtering System Hezil Nawel-Effect of Al Content on Tribological Behavior of Cr-Al-N Coating System M. Bendoukha-Anisotropic Response of Holzapfel Constitutive Model for the Lumbar Spine Considering Degeneration-Related changes Constantin Georgescu-Influence of the Additive Nature in Soybean Oil on Rheological Behavior April 18, 2018 Elite World Prestige Hotel, Taksim-Istanbul-TURKEY Poster Session 2 15:00 15:30 Fatiha Benghanem-Protection of XC48 Steel Corrosion with New Schiff Base in 0.5 M H2SO4 Solution Fatiha Benghanem-Investigation on the Inhibition Behavior of a 2,3-bis(3-hydroxy benzylidène-amine) Pyridine for Steel in Solution Simulating Water of Pores in Absence S. Marouani-Electrochemical and Quantum Chemical Studies of Synthesized Benzimidazole Derivative as Eco-friendly Corrosion Inhibitor for XC52 Steel S. Marouani-Electrochemical and DFT Study of the Inhibition of the Corrosion of Concrete Reinforcement with a New Schiff Base in Presence of 0.5 M NaCl Rıdvan Gecü-Tribological Characterization of 304 Stainless Steel Reinforced AA7075 Aluminium Matrix Composite Produced by Melt Infiltration Casting Nassereddine BELIARDOUH-Tribological Performances of 13Cr5Ni2Mo Super-Martensitic Stainless Steel Iulia Graur-Effect of Composition on Friction Coefficient of Tryptophan Composites Yong-Suk Kim-Tribo-Characteristics of DLC Coated H13 Tool Steel Sliding Against AZ31 Mg Alloy with Mg(OH)2 Layer Fatima Zohra Benlahreche-Effect of Thermochemical Treatment En Corrosion Behaviour of C22 Carbon Steel

10 April 19, 2018 Elite World Prestige Hotel, Taksim-Istanbul-TURKEY Poster Session 3 10:30 11:00 Uğur Günay-Erodent Size Effect on the Erosion of Basalt Base Glass-Ceramics Khalissa Ariane-Crystallization Study of LMAS Glass-Ceramic by Differential Thermal Analysis Abdelaziz Gahmousse-Elaboration and Characterization of Glass Emissivity with Different Iron (III) Oxide Concentrations Doğuhan Ufuk Işık-On the Evaluation of Friction Coefficients Using Grids of Ring Compression Test Specimen Belbali Assia-Effect of Temperature and Time of Sintering on the Microstructural Characteristics of Chamot - Carbon Mixtures Uğur Barut-Effect of Current Type on Tribological Properties of Nickel Boron Coatings Produced by Electrodeposition Uğur Barut-Effect of Nano SiC Amounts on Tribological Properties of Ni-B-Co Based Nano Composite Coatings Produced by Electrodeposition Uğur Barut-Effect of Different Current Type on Tribological Properties of Ni-B-Co/SiC Nano Composite Coatings Produced by Electrodeposition Ayadi Abdelwahhab-Repairing of Eroded Glass Surface by Thermochemicals Treatments, and Sol Gel Organic and Hybrid Silica Coatings Hossem Taallah-Preparation and Characterization of Low-Emissivity WO3 Glass-Ceramic Glazing Saida Bouyegh-Mechanical and Corrosion Studies on Magnesium alloy as Biomaterials April 19, 2018 Elite World Prestige Hotel, Taksim-Istanbul-TURKEY Poster Session 4 15:45 16:15 Yalçın Erdoğan-Damage Evaluation of CFRP/CFRP Adhesive Joints Under Different Laser Fluences with CO2 and UV Laser Norelhouda Lameche-Laser Damage of ZnO Thin Films Nazlı Acar-Tribological and Rheological Characterization of New Completely Biogenic Lubricating Greases Melia Hamici-Effect of the Synthesis Method and Substrate on Optical and Structural Properties of Electrochemically Deposited ZnO Thin Films Lakhdar Boulanouar-Experimental Investigation on the Machinability of Hardened and Unhardened C18 Steel in Drilling Nuray Beköz Üllen-Investigation of Cutting Techniques of Hardox Steels Nuray Beköz Üllen-Investigation of The Wear Resistance of Hardox Steel Plates Khadoudj Guessoum-Micro-arc Oxidation of Zinc in KOH Media at High Voltage H. Tarik Baytekin-Dependence of Tribocharging on Degradation of Lubricants END OF CONFERENCE

Evaluation of Microstructure, Mechanical and Wear Properties of Aluminium Reinforced with Boron Carbide Nano Composite

Evaluation of Microstructure, Mechanical and Wear Properties of Aluminium Reinforced with Boron Carbide Nano Composite Indian Journal of Science and Technology, Vol 9(20), DOI: 10.17485/ijst/2016/v9i20/84294, May 2016 ISSN (Print) : 0974-6846 ISSN (Online) : 0974-5645 Evaluation of Microstructure, Mechanical and Wear Properties

More information

Wear Characteristics of AA5050/TiC Metal Matrix Composites

Wear Characteristics of AA5050/TiC Metal Matrix Composites Wear Characteristics of AA5050/TiC Metal Matrix Composites A. Chennakesava Reddy Associate Professor, Department of Mechanical Engineering, JNTU College of Engineering, Hyderabad, India dr_acreddy@yahoo.com

More information

Cutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba

Cutting Tool Materials and Cutting Fluids. Dr. Mohammad Abuhaiba Cutting Tool Materials and Cutting Fluids HomeWork #2 22.37 obtain data on the thermal properties of various commonly used cutting fluids. Identify those which are basically effective coolants and those

More information

Index. Automotive engines, silicon nitride products development, 83-94

Index. Automotive engines, silicon nitride products development, 83-94 Index Advanced composite ceramics, properties and applications, 109-22 Aircraft engine bearings, shaft speed limits, 46-8 Alumina cast sintered, applications, 72-5 comparative erosive wear performance,

More information

MANUFACTURING PROCESSES. Tool Material & Cutting Fluid

MANUFACTURING PROCESSES. Tool Material & Cutting Fluid MANUFACTURING PROCESSES Tool Material & Cutting Fluid 1 CUTTING TOOL MATERIAL Success in metal cutting depends on the selection of the proper cutting tool (material and geometry) for a given work material.

More information

Mold Design. 12. Mold Materials. Bong-Kee Lee School of Mechanical Engineering Chonnam National University

Mold Design. 12. Mold Materials. Bong-Kee Lee School of Mechanical Engineering Chonnam National University 12. Mold Materials Bong-Kee Lee Chonnam National University Mold Materials easy toolmaking good performance during production good machining properties ease of hear treatment where hardening is required

More information

WEAR PROPERTIES OF PLASMA NITRIDED INCONEL 718 SUPERALLOY

WEAR PROPERTIES OF PLASMA NITRIDED INCONEL 718 SUPERALLOY WEAR PROPERTIES OF PLASMA NITRIDED INCONEL 718 SUPERALLOY Halim Kovacı 1, Hojjat Ghahramanzadeh ASL 1, Çiğdem Albayrak 2, Akgün Alsaran 1 1 Ataturk University, Erzurum, Turkey 2 Erzincan University, Erzincan,

More information

INTRODUCTION. Think HSS

INTRODUCTION. Think HSS INTRODUCTION Think HSS SUMMARY METALLURGY 2 Excellent strength 3 A super sharp edge 4 Safe and reliable tools Alloy elements 6 The influence of alloy elements 7 Standard compositions of HSS 8 The HSS-PM

More information

Tribology of Journal Bearings Subjected to Boundary and Mixed Lubrication

Tribology of Journal Bearings Subjected to Boundary and Mixed Lubrication Mechanics of Contact and Lubrication ME5656 Department of Mechanical & Industrial Engineering Northeastern University Fall 2011 Tribology of Journal Bearings Subjected to Boundary and Mixed Lubrication

More information

Discover the variety of Metal Powders

Discover the variety of Metal Powders Discover the variety of Metal Powders The range of our standard metal powder Non Ferrous, Tool Steel, Stainless Steel and Light Alloys SLM The Industrial Manufacturing Revolution PIONEERS in metal-based

More information

Beechcraft Corporation Special Processes Index Special Processes that Require Approval to Perform

Beechcraft Corporation Special Processes Index Special Processes that Require Approval to Perform Brazing Note: Part Number-specific approval is required for Suppliers who do not hold Nadcap Welding/Brazing certification. Silver brazing requires Part Number-specific approval in all cases. Contact:

More information

On the Wear of AA4015 Fused Silica Metal Matrix Composites. A. Chennakesava Reddy

On the Wear of AA4015 Fused Silica Metal Matrix Composites. A. Chennakesava Reddy On the Wear of AA4015 Fused Silica Metal Matrix Composites A. Chennakesava Reddy Associate Professor, Department of Mechanical Engineering, Vasavi College of Engineering, Hyderabad, India dr_acreddy@yahoo.com

More information

Self Healing Ceramic (Surfaces)

Self Healing Ceramic (Surfaces) Self Healing Ceramic (Surfaces) KIVI NIRIA Jaarcongres 23 november 2011 Matthijn de Rooij University of Twente Laboratory for Surface Technology and Tribology Introduction Technical Ceramics Crystalline

More information

Tribology Module4: Lubricants & Lubrication

Tribology Module4: Lubricants & Lubrication Tribology Module4: Lubricants & Lubrication Q.1. What is fluid film lubrication? What is the difference between hydrostatic and hydrodynamic lubrication? Ans: Fluid film lubrication is a generic term used

More information

SIRRIS ADD department. Additive Manufacturing

SIRRIS ADD department. Additive Manufacturing SIRRIS ADD department Additive Manufacturing thierry.dormal@sirris.be ADD capacities & competencies SIRRIS ADD (1990 2011) 15 engineers and technicians Two locations: Liège (10 p.) and Charleroi (5 p.)

More information

Applications. - APS coatings -

Applications. - APS coatings - Applications - APS coatings - Applications of APS coatings Typical spray materials Oxide ceramics: Cr 2 O 3, Al 2 O 3, Al 2 O 3 /TiO 2 Compounds: Ni/C G, AlSi/Polyester, [WC/Co(Cr), Cr 3 C 2 /NiCr] Metals:

More information

A Study on Mechanical Properties of Aluminium LM25- Si c Composites Fabricated Using Stir Casting Technique

A Study on Mechanical Properties of Aluminium LM25- Si c Composites Fabricated Using Stir Casting Technique A Study on Mechanical Properties of Aluminium LM25- Si c Composites Fabricated Using Stir Casting Technique.Satyanarayen 1, Dominic Roystan 2, M.Shreesaravanan 3 Balaguru 4, C.Devanathan 5 1,2,3,4 UG Students,

More information

International Journal of Engineering Research and General Science Volume 4, Issue 2, March- April, 2016 ISSN

International Journal of Engineering Research and General Science Volume 4, Issue 2, March- April, 2016 ISSN Mechanical Properties of Al6061 Based Metal Matrix Composites Reinforced with Ceramic Particulates and Effect of Age Hardening on its Tensile Characteristics G.Shaikshavali 1, Dr. E.Venugopal goud 2, M.Murali

More information

STUDY OF FRICTION COEFFICIENT BETWEEN PARTS OF ALUMINUM AND IRON CONTAINING ALLOYS

STUDY OF FRICTION COEFFICIENT BETWEEN PARTS OF ALUMINUM AND IRON CONTAINING ALLOYS 337 STUDY OF FRICTION COEFFICIENT BETWEEN PARTS OF ALUMINUM AND IRON CONTAINING ALLOYS Georgi KADIKYANOV Vasil STOYANOV Daniel BEKANA Emil MARINOV University of Ruse, Bulgaria Summary: The high coefficient

More information

1-Materials Science & Materials Engineering

1-Materials Science & Materials Engineering 1-Materials Science & Materials Engineering 1-1-Structure & Properties Relationship (Materials Science or Materials Engineering) Processing Structure Properties Performance Sub Atomic Atomic Sub Atomic

More information

2nd Austrian-Indian- Symposium on Materials Science and Tribology. MaTri 14

2nd Austrian-Indian- Symposium on Materials Science and Tribology. MaTri 14 2nd Austrian-Indian- Symposium on Materials Science and Tribology MaTri 14 May 26-29, 2014 Technology and Research Centre Wiener Neustadt Wiener Neustadt, Austria Final Program Organised by AC²T research

More information

Manufacturing Technologies University of Rome Tor Vergata

Manufacturing Technologies University of Rome Tor Vergata Manufacturing Tech (6 cr) + Metallurgy (3 cr) Initial introduction (1 week) Timetable 6 credits (54-60 h) End of the course: 28 giugno Type of examination Written test Oral test (mandatory) Average of

More information

PhotoCat Project Biannual Meeting _Istanbul 2015_ WELCOME. May 7-8, 2015 Istanbul, Turkey

PhotoCat Project Biannual Meeting _Istanbul 2015_ WELCOME. May 7-8, 2015 Istanbul, Turkey PhotoCat Project Biannual Meeting _Istanbul 2015_ WELCOME May 7-8, 2015 Istanbul, Turkey Thursday, 7 May 2015 Ozyegin University Cekmekoy Campus (Access: http://www.ozyegin.edu.tr/anasayfa?lang=en-us )

More information

EXPERIMENTAL STUDY ON MECHANICAL PROPERTIES OF ALUMINIUM ALLOY REINFORCED WITH SILICON CARBIDE AND FLY ASH, HYBRID METAL MATRIX COMPOSITES

EXPERIMENTAL STUDY ON MECHANICAL PROPERTIES OF ALUMINIUM ALLOY REINFORCED WITH SILICON CARBIDE AND FLY ASH, HYBRID METAL MATRIX COMPOSITES EXPERIMENTAL STUDY ON MECHANICAL PROPERTIES OF ALUMINIUM ALLOY REINFORCED WITH SILICON CARBIDE AND FLY ASH, HYBRID METAL MATRIX COMPOSITES Ajit Kumar Senapati 1, Gopal Krushna Mohanta 2 1,2 Associate Professor,

More information

ABRASIVE WEAR OF CHEMICAL NICKEL COATINGS WITH BORON NITRIDE NANO-PARTICLES

ABRASIVE WEAR OF CHEMICAL NICKEL COATINGS WITH BORON NITRIDE NANO-PARTICLES ABRASIVE WEAR OF CHEMICAL NICKEL COATINGS WITH BORON NITRIDE NANO-PARTICLES M. Kandeva 1, A. Vencl 2, E. Assenova 3, D. Karastoyanov 4, T. Grozdanova 5 1. Technical University - Sofia, Faculty of Industrial

More information

Thermal Surfacing Powder choice with ease

Thermal Surfacing Powder choice with ease Thermal Surfacing Powder choice with ease Why Thermal Surfacing Thermal surfacing is a cost effective method to achieve high performance characteristics on exposed metallic surfaces. A metal object can

More information

A SHORT NOTE ON MANUFACTURING PROCESS OF METAL POWDERS

A SHORT NOTE ON MANUFACTURING PROCESS OF METAL POWDERS INTERNATIONAL JOURNAL OF RESEARCH IN COMPUTER APPLICATIONS AND ROBOTICS ISSN 2320-7345 A SHORT NOTE ON MANUFACTURING PROCESS OF METAL POWDERS 1 R.Raja, 2 M.Rajkumar 1 Assistant Lecturer, St. Joseph College

More information

Prevention Strategies Design and Coatings

Prevention Strategies Design and Coatings Lecture 14 Prevention Strategies Design and Coatings Keywords: Corrosion Prevention, Designs, Protective Coatings. There are a number of methods to control corrosion. The choice of any one control technique

More information

engineering of light alloys

engineering of light alloys Surface engineering of light alloys Aluminium, magnesium and titanium alloys Edited by Hanshan Dong TECHNISCHE INFORMATIONSBIBLIOTHEK UNIVERSITATSBIBLIOTHEK HANNOVER Boca Raton CRC Press Boston New York

More information

Pollution Prevention in Machining and Metal Fabrication

Pollution Prevention in Machining and Metal Fabrication ... Pollution Prevention in Machining and Metal Fabrication A Manual for Technical Assistance Providers Excerpts March 2001... CHAPTER 5 Innovative Pollution Prevention Technologies Industry vendors have

More information

Review of Manufacturing Processes

Review of Manufacturing Processes Review of Manufacturing Processes ME 682 Dr. Han P. Bao Mechanical Engineering, ODU ME 682 Module 3 1 Engineering Materials The four major categories: Metal Plastics Ceramics Composites 1- Metals: Cast:

More information

Chapter 11: Applications and Processing of Metal Alloys

Chapter 11: Applications and Processing of Metal Alloys Chapter 11: Applications and Processing of Metal Alloys ISSUES TO ADDRESS... How are metal alloys classified and what are their common applications? What are some of the common fabrication techniques for

More information

THINK. Filter Technology SIKA-B

THINK. Filter Technology SIKA-B THINK Filter Technology SIKA-B ENGINEERING THAT MOVES THE WORLD Since 1759 250 years of exceptional engineering GKN Sinter Metals Filters, the leading manufacturer of porous sinter metal products, offers

More information

Metallic materials for extreme environments with nanostructural surface layer (MENSUR)

Metallic materials for extreme environments with nanostructural surface layer (MENSUR) For submission to EU s 7 th framework programme Metallic materials for extreme environments with nanostructural surface layer (MENSUR) Programme objective: NMP-2007-4.2.5-1 Novel materials tailored for

More information

POWPOWEER GENR ERATION

POWPOWEER GENR ERATION POWER GENERATION POWER GENERATION Kennametal Stellite is a global provider of solutions for wear, heat, and corrosion problems, a worldclass manufacturer of components, and a service provider for the power

More information

LOW HEAT INPUT WELDING ALLOYS

LOW HEAT INPUT WELDING ALLOYS ASTRALOY 662 CHARACTERISTICS: An all position AC/DC electrode for high strength, crack free joining of low/medium carbon, and medium tensile steels of various compositions. Low alloy medium carbon steels,

More information

HEAT-RESISTANT BRAZING FILLER METALS FOR JOINING TITANIUM ALUMINIDE AND TITANIUM ALLOYS

HEAT-RESISTANT BRAZING FILLER METALS FOR JOINING TITANIUM ALUMINIDE AND TITANIUM ALLOYS HEAT-RESISTANT BRAZING FILLER METALS FOR JOINING TITANIUM ALUMINIDE AND TITANIUM ALLOYS Alexander E. Shapiro* and Eugene Y. Ivanov** *Titanium Brazing, Inc., Columbus, OH, ashapiro@titanium-brazing.com

More information

Final Examination. Instructions. Guidelines. UNIVERSITY OF CALIFORNIA College of Engineering Department of Materials Science & Engineering

Final Examination. Instructions. Guidelines. UNIVERSITY OF CALIFORNIA College of Engineering Department of Materials Science & Engineering UNIVERSITY OF CALIFORNIA College of Engineering Department of Materials Science & Engineering Spring Semester 2006 Professor R. Gronsky MSE 121 Name (Please Print) Final Examination Instructions Please

More information

Aluminium and aluminium alloys. Castings. Chemical composition and mechanical

Aluminium and aluminium alloys. Castings. Chemical composition and mechanical BSI titles relevant to the cast metals industry (as at 20/5/9) BSI Title International Equiv Aluminium and aluminium alloys. Castings. Chemical composition and mechanical where known 94/713477DC properties

More information

Ferrous Alloys. Metal Alloys. Ferrous. Non ferrous. Grey iron. Carbon Low Alloy High Alloy. Nodular iron White iron Malleable iron Alloy cast irons

Ferrous Alloys. Metal Alloys. Ferrous. Non ferrous. Grey iron. Carbon Low Alloy High Alloy. Nodular iron White iron Malleable iron Alloy cast irons Metal Alloys Most engineering metallic materials are alloys. Metals are alloyed to enhance their properties, such as strength, hardness or corrosion resistance, and to create new properties, such as shape

More information

DURNI-COAT Industrial Coatings for Metals and Plastics

DURNI-COAT Industrial Coatings for Metals and Plastics DURNI-COAT Industrial Coatings for Metals and Plastics DURNI-COAT High wear resistance Good dimensional accuracy Outstanding hardness Excellent corrosion resistance Uniform layer formation Electrical conductivity

More information

Machinability is the ease with which a given material may be worked with a cutting tool

Machinability is the ease with which a given material may be worked with a cutting tool Machinability Machinability is the ease with which a given material may be worked with a cutting tool Machinability ratings (MR) provide and understanding of the severity of a metalworking operation in

More information

Development of Oil-impregnated Sintered Bearing of Low Wear and Corrosion Resistance

Development of Oil-impregnated Sintered Bearing of Low Wear and Corrosion Resistance New Product Development of Oil-impregnated Sintered Bearing of Low Wear and Corrosion Resistance Kazuhiro KIMURA Recently, oil-impregnated sintered bearings, which are slipping bearings, are used for a

More information

Light Bases & Light Fixtures

Light Bases & Light Fixtures Light Bases & Light Fixtures Keeping Them Together Clamping Force/Preload Force Torque Bolt Specifications Corrosion Galling 18-8 Disadvantages EB-83 bolts 2 Clamping Force = Preload Force 3 Fastener acts

More information

Powder Metallurgy. Science, Technology. and Materials. Anish Upadhyaya. G S Upadhyaya. Department of Materials Science and Engineering

Powder Metallurgy. Science, Technology. and Materials. Anish Upadhyaya. G S Upadhyaya. Department of Materials Science and Engineering Powder Metallurgy Science, Technology and Materials Anish Upadhyaya Associate Professor Department of Materials Science and Engineering Indian Institute of Technology Kanpur, India G S Upadhyaya Former

More information

Friction and wear properties of copper-based composites reinforced with microand nano-sized Al 2 O 3 particles

Friction and wear properties of copper-based composites reinforced with microand nano-sized Al 2 O 3 particles ART 21 YEARS OF BALKAN TRIBOLOGICAL ASSOCIATION ROMANIAN TRIBOLOGY ASSOCIATION UNIVERSITY PETROLEUM-GAS OF PLOIESTI, ROMANIA BALKANTRIB 14 8 th INTERNATIONAL CONFERENCE ON TRIBOLOGY, 3 th Oct.-1 st Nov.214,

More information

Application and importance of copper and copper powder on powder metallurgy field

Application and importance of copper and copper powder on powder metallurgy field Application and importance of copper and copper powder on powder metallurgy field In recent years, powder metallurgy scholars have paid more attention to materials that have nanometer and composite feature.

More information

Analysis and design of composite structures

Analysis and design of composite structures Analysis and design of composite structures Class notes 1 1. Introduction 2 Definition: composite means that different materials are combined to form a third material whose properties are superior to those

More information

11.3 Polishing with Laser Radiation

11.3 Polishing with Laser Radiation 196 E. Willenborg 11.3 Polishing with Laser Radiation Edgar Willenborg The surface roughness of a part or product strongly influences its properties and functions. Among these can be counted abrasion and

More information

Enhanced Response from Engineered Nano Treated Peizofilm

Enhanced Response from Engineered Nano Treated Peizofilm Enhanced Response from Engineered Nano Treated Peizofilm By Sai Narayan Sundar Advisor Dr J.P Sharma Dept. of Mechanical Engineering University of Mississippi i: flow of current due to piezo deformation

More information

1. INTRODUCTION. Further exploitation of the technology led to coatings which offer huge

1. INTRODUCTION. Further exploitation of the technology led to coatings which offer huge 1. INTRODUCTION 1.1. GENERAL Surface engineering deals with modification of the surface properties of engineering components as majority of failures originate from the surface. Wear and corrosion are the

More information

Choice of Test Machines

Choice of Test Machines Choice of Test Machines 2003 George Plint Wear & Failure Mechanisms The more we can characterize the full scale problem the easier it becomes to ensure that the bench tests we run will provide useful information.

More information

AERO 214. Introduction to Aerospace Mechanics of Materials. Lecture 2

AERO 214. Introduction to Aerospace Mechanics of Materials. Lecture 2 AERO 214 Introduction to Aerospace Mechanics of Materials Lecture 2 Materials for Aerospace Structures Aluminum Titanium Composites: Ceramic Fiber-Reinforced Polymer Matrix Composites High Temperature

More information

TRIBOLOGICAL PROPERTIES OF SOLID LUBRICANT NANOCOMPOSITE COATINGS OBTAINED BY MAGNETRON SPUTTERED OF MOS 2 /METAL (TI, MO) NANOPARTICLES

TRIBOLOGICAL PROPERTIES OF SOLID LUBRICANT NANOCOMPOSITE COATINGS OBTAINED BY MAGNETRON SPUTTERED OF MOS 2 /METAL (TI, MO) NANOPARTICLES THE PUBLISHING HOUSE PROCEEDINGS OF THE ROMANIAN ACADEMY, Series A, OF THE ROMANIAN ACADEMY Volume 8, Number 3/2007, pp. 000-000 TRIBOLOGICAL PROPERTIES OF SOLID LUBRICANT NANOCOMPOSITE COATINGS OBTAINED

More information

Typical aerospace-standard materials

Typical aerospace-standard materials JOHANN MAIER GmbH & Co. KG Schockenriedstraße 3 70565 Stuttgart-Vaihingen Typical aerospace-standard materials 1.4314.7 Stainless, austenitic steel 0,05C-1Cr-Ni X5 CrNi 1 1.4301 / AISI 304 60 * * Special

More information

DRY SLIDING WEAR BEHAVIOUR OF STIR CAST LM 25/ZrO 2 METAL MATRIX COMPOSITES

DRY SLIDING WEAR BEHAVIOUR OF STIR CAST LM 25/ZrO 2 METAL MATRIX COMPOSITES Govindan Karthikeyan GowthamiThankachi Raghuvaran Jinu ISSN 1333-1124 eissn 1849-1391 DRY SLIDING WEAR BEHAVIOUR OF STIR CAST LM 25/O 2 METAL MATRIX COMPOSITES Summary In the present study, an investigation

More information

أت ارش. Dr. Abdel-Wahab El-Morsy Faculty of Engineering - Rabigh

أت ارش. Dr. Abdel-Wahab El-Morsy Faculty of Engineering - Rabigh Basic Workshop 1 أت ارش There are thousands of materials available for use in engineering applications. Most materials fall into one of three classes that are based on the atomic bonding forces of a particular

More information

PRIREV. ZI Vagos, lote

PRIREV. ZI Vagos, lote 2017 PRIREV We are the only Portuguese company that provides Decorative PVD services in several business areas. Our mission is make our partners more competitive in their markets with higher added value

More information

Available online at ScienceDirect. Procedia Technology 23 (2016 )

Available online at  ScienceDirect. Procedia Technology 23 (2016 ) Available online at www.sciencedirect.com ScienceDirect Procedia Technology 23 (2016 ) 150 155 3rd International Conference on Innovations in Automation and Mechatronics Engineering, ICIAME 2016 Tribological

More information

ÓASM International DOI: /s /$19.00

ÓASM International DOI: /s /$19.00 JMEPEG (2014) 23:1263 1269 ÓASM International DOI: 10.1007/s11665-014-0904-0 1059-9495/$19.00 TiN-Coating Effects on Stainless Steel Tribological Behavior Under Dry and Lubricated Conditions Liqiang Zhang,

More information

DURNI-COAT Industrial Coatings for Metals and Plastics

DURNI-COAT Industrial Coatings for Metals and Plastics DURNI-COAT Industrial Coatings for Metals and Plastics DURNI-COAT High wear resistance Good dimensional accuracy Outstanding hardness Excellent corrosion resistance Uniform layer formation Electrical conductivity

More information

Application of Coating Technology on the Zirconium-Based Alloy to Decrease High-Temperature Oxidation

Application of Coating Technology on the Zirconium-Based Alloy to Decrease High-Temperature Oxidation Application of Coating Technology on the Zirconium-Based Alloy to Decrease High-Temperature Oxidation Hyun-Gil Kim*, Il-Hyun Kim, Jeong-Yong Park, Yang-Hyun Koo, KAERI, 989-111 Daedeok-daero, Yuseong-gu,

More information

Material for a pressure vessel Short term thermal insulation Energy efficient kilns

Material for a pressure vessel Short term thermal insulation Energy efficient kilns More Case Studies in Materials Selection Material for a pressure vessel Short term thermal insulation Energy efficient kilns More info: Materials Selection in Mechanical Design, Chapters 5 and 6 ME 474-674

More information

MSE-226 Engineering Materials

MSE-226 Engineering Materials MSE-226 Engineering Materials Lecture-7 ALLOY STEELS Tool Steels TYPES of FERROUS ALLOYS FERROUS ALLOYS Plain Carbon Steels Alloy Steels Cast Irons - Low carbon Steel - Medium carbon steel - High carbon

More information

Electroplating, Anodizing & Metal Treatment Hand Book

Electroplating, Anodizing & Metal Treatment Hand Book Electroplating, Anodizing & Metal Treatment Hand Book Author: NPCS Board of Consultants & Engineers Format: Paperback ISBN: 9788178331386 Code: NI63 Pages: 720 Price: Rs. 1,475.00 US$ 150.00 Publisher:

More information

Types of Metal Alloys

Types of Metal Alloys Types of Metal Alloys Metal alloys Ferrous Nonferrous Steels Cast iron 257 Uses low carbon

More information

CoatingImplants. ResearchEngineer OrchidOrthopedicSolutions

CoatingImplants. ResearchEngineer OrchidOrthopedicSolutions 2014 CoatingImplants ParimalBapat,Ph.D. ResearchEngineer OrchidOrthopedicSolutions OMTEC 2014 Technical Session: Coating Implants June 11 th 2014 1:30 PM 2:30 PM Presenter: Dr. Parimal V. Bapat Research

More information

CUTTING TOOL TECHNOLOGY

CUTTING TOOL TECHNOLOGY CUTTING TOOL TECHNOLOGY Tool Life Tool Materials Tool Geometry Cutting Fluids Cutting Tool Technology Two principal aspects: 1. Tool material 2. Tool geometry Three Modes of Tool Failure Fracture failure

More information

CEM - Science and Engineering of Materials

CEM - Science and Engineering of Materials Coordinating unit: 205 - ESEIAAT - Terrassa School of Industrial, Aerospace and Audiovisual Engineering Teaching unit: 712 - EM - Department of Mechanical Engineering Academic year: Degree: 2017 BACHELOR'S

More information

Technology Linear friction welding

Technology Linear friction welding Technology Linear friction welding EN A strong partner Linear friction welding is a new process and is a derivative of our rotary technology where we are one of the world s leading suppliers with more

More information

Creep and High Temperature Failure. Creep and High Temperature Failure. Creep Curve. Outline

Creep and High Temperature Failure. Creep and High Temperature Failure. Creep Curve. Outline Creep and High Temperature Failure Outline Creep and high temperature failure Creep testing Factors affecting creep Stress rupture life time behaviour Creep mechanisms Example Materials for high creep

More information

A Study on the Powder Forging of Aluminum Alloy Pistons

A Study on the Powder Forging of Aluminum Alloy Pistons International Journal of the Korean Society of Precision Engineering Vol. 2, No. 4, November 2001. A Study on the Powder Forging of Aluminum Alloy Pistons Jong-Ok Park 1,Chul-WooPark 1 and Young-Ho Kim

More information

Nontraditional Machining Processes

Nontraditional Machining Processes Nontraditional Machining Processes The NTM processes can be divided into four basic categories: I. Chemical (Chemical reaction), II. Electrochemical (Electrolytic dissolution), III. Mechanical (Multipoint

More information

The Practical Side of the Project WnM

The Practical Side of the Project WnM The Practical Side of the Project WnM verschleißbeständige Werkstoffe nach Maß customized wear-resistant materials: designed by computer-aided materials simulation, and manufacted by laser welding Dr.-Ing.

More information

ABRADABLE THERMAL SPRAY COATINGS

ABRADABLE THERMAL SPRAY COATINGS ABRADABLE THERMAL SPRAY COATINGS Introduction and Background Abradable thermal spray coatings, also known as clearance control / seal coatings, are successfully used today in aero-engines, industrial and

More information

SPRING SEMESTER GRADUATE APPLICATIONS RESEARCH TOPICS FOR PROSPECTIVE STUDENTS

SPRING SEMESTER GRADUATE APPLICATIONS RESEARCH TOPICS FOR PROSPECTIVE STUDENTS 2012-2013 SPRING SEMESTER GRADUATE APPLICATIONS RESEARCH TOPICS FOR PROSPECTIVE STUDENTS Program (. or Integrated Prof.Dr. İshak Karakaya Electrodeoxidation and/or. Program (. or Integrated Assist. Prof.

More information

EUROPEAN STEEL SCRAP SPECIFICATION. General Conditions applicable to all grades

EUROPEAN STEEL SCRAP SPECIFICATION. General Conditions applicable to all grades Bundesvereinigung Deutscher Stahlrecycling- und Entsorgungsunternehmen e.v. EUROPEAN STEEL SCRAP SPECIFICATION Version: June 1 st 1995 General Conditions applicable to all grades As is pratically achievable

More information

ASTM Volume 02.05, May 2017 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products

ASTM Volume 02.05, May 2017 Metallic and Inorganic Coatings; Metal Powders and Metal Powder Products 1 B136-84(2013) Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum 2 B137-95(2014) Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated

More information

Tribological behaviour of carbon filled hybrid UHMWPE composites in water

Tribological behaviour of carbon filled hybrid UHMWPE composites in water Tribological behaviour of carbon filled hybrid UHMWPE composites in water Hari Shankar Vadivel, Arash Golchin, Nazanin Emami Biotribology group, Division of Machine Elements, Luleå University of Technology,

More information

AIT Austrian Institute of Technology Light Metals Technologies Ranshofen LKR Leichtmetallkompetenzzentrum Ranshofen GmbH Mobility Department

AIT Austrian Institute of Technology Light Metals Technologies Ranshofen LKR Leichtmetallkompetenzzentrum Ranshofen GmbH Mobility Department AIT Austrian Institute of Technology Light Metals Technologies Ranshofen Mobility Department Dipl.-Ing. Rudolf Gradinger Head of Business Deveolpment LKR rudolf.gradinger@ait.ac.at JTI Workshop, BMVIT,

More information

TRIBOLOGICAL PROPERTIES OF COMPOSITE MATERIALS

TRIBOLOGICAL PROPERTIES OF COMPOSITE MATERIALS TRIBOLOGICAL PROPERTIES OF COMPOSITE MATERIALS Assoc. Prof. Minodora PASĂRE, Ph.D. Cătălina IANĂŞI Constantin Brancusi University of Tg-Jiu, Romania minodora_pasare@yahoo.com, ianasi_c@yahoo.com Abstract:

More information

The surface layer of austempered ductile iron investment castings properties

The surface layer of austempered ductile iron investment castings properties ARCHIVES of FOUNDRY ENGINEERING Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (1897-3310) Volume 9 Issue 1/2009 157-162 35/1 The surface layer of austempered

More information

Factors Affecting Friction Coating on Stainless Steel 304

Factors Affecting Friction Coating on Stainless Steel 304 International Journal of Scientific and Research Publications, Volume 3, Issue 3, March 2013 1 Factors Affecting Friction Coating on Stainless Steel 304 G.S.Nixon *, Dr.B.S.Mohanty **, S. Godwin Barnabas

More information

Investigation into the effect of Aluminium powder on Mechanical, Tribological and Electrical properties of Al-ABS composites

Investigation into the effect of Aluminium powder on Mechanical, Tribological and Electrical properties of Al-ABS composites Investigation into the effect of Aluminium powder on Mechanical, Tribological and Electrical properties of Al-ABS composites MEENA LAAD Associate Professor Symbiosis Institute of Technology (SIT) Symbiosis

More information

Comparative Investigation of Mechanical Properties of Aluminium Based Hybrid Metal Matrix Composites

Comparative Investigation of Mechanical Properties of Aluminium Based Hybrid Metal Matrix Composites (AET- 29th March 24) RESEARCH ARTICLE OPEN ACCESS Comparative Investigation of Mechanical Properties of Aluminium Based Hybrid Metal Matrix Composites Dinesh Kumar*, Jasmeet Singh** *(Research scholar,

More information

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two

More information

Effects of Carbon Black Nanoparticles on Wear Resistance of AA7020/Carbon Black Metal Matrix Composites

Effects of Carbon Black Nanoparticles on Wear Resistance of AA7020/Carbon Black Metal Matrix Composites American Journal of Materials Science 2017, 7(3): 47-52 DOI: 10.5923/j.materials.20170703.01 Effects of Carbon Black Nanoparticles on Wear Resistance of AA7020/Carbon Black Metal Matrix Composites T. Prasad

More information

Effect of heat input on Stellite 6 coatings on a medium carbon steel substrate by laser cladding

Effect of heat input on Stellite 6 coatings on a medium carbon steel substrate by laser cladding University of Wollongong Research Online Faculty of Engineering and Information Sciences - Papers: Part A Faculty of Engineering and Information Sciences 2015 Effect of heat input on Stellite 6 coatings

More information

Asia Pacific Journal of Engineering Science and Technology 3 (4) (2017)

Asia Pacific Journal of Engineering Science and Technology 3 (4) (2017) Asia Pacific Journal of Engineering Science and Technology 3 (4) (2017) 151-155 Asia Pacific Journal of Engineering Science and Technology https://www.researchgate.net/publication/271587685 Nano-materials

More information

TRIBOLOGICAL CHARACTERISTICS OF ALUMINIUM HYBRID COMPOSITES REINFORCED WITH SILICON CARBIDE AND

TRIBOLOGICAL CHARACTERISTICS OF ALUMINIUM HYBRID COMPOSITES REINFORCED WITH SILICON CARBIDE AND Journal of the Balkan Tribological Association Vol. 19, No 1, 83 96 (213) Hybrid composites TRIBOLOGICAL CHARACTERISTICS OF ALUMINIUM HYBRID COMPOSITES REINFORCED WITH SILICON CARBIDE AND GRAPHITE. a review

More information

1 Cutting Tool Materials of common use

1 Cutting Tool Materials of common use 1 Cutting Tool Materials of common use Instructional Objectives At the end of this lesson, the students will be able to (i) Identify the needs and cite the chronological development of cutting tool materials.

More information

SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000

SUB-Programs - Calibration range Fe Base for PMI-MASTER Pro Spark - mode Fe 000 SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool

More information

Corrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B

Corrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B Corrosion resistance of the polymer matrix hard magnetic composite materials Nd-Fe-B L.A. Dobrzaski, M. Drak, J. Trzaska Division of Materials Processing Technology and Computer Techniques in Materials

More information

Fabrication of Magnesium Oxide Ceramics with Density Close to Theoretical Using Nanopowders

Fabrication of Magnesium Oxide Ceramics with Density Close to Theoretical Using Nanopowders Fabrication of Magnesium Oxide Ceramics with Density Close to Theoretical Using Nanopowders Jing Yang, Tzu-Chieh Lin, Bill Manett, Jeremy Young, Dan Rooney Eugene Medvedovski SCI Engineered Materials,

More information

The application of nano metal powder

The application of nano metal powder The application of nano metal powder Nano material and nanotechnology respectively belong to the new material and advanced technology that emerged in the late 20 th century. Due to the small size effect,

More information

Improved Technologies of Steam Turbine for Long Term Continuous Operation

Improved Technologies of Steam Turbine for Long Term Continuous Operation Improved Technologies of Steam Turbine for Long Term Continuous Operation SUMIO NODA* 1 YOSHIKAZU YAMADA* 2 SATORU ZENITANI* 2 TOMOYOSHI SASAKI* 3 There are increased demands in recent years for improved

More information

Automotive & Mechanical Applications Broad Base. Best Solutions.

Automotive & Mechanical Applications Broad Base. Best Solutions. Carbon and Graphite Materials for Mechanical Seals Automotive & Mechanical Applications Broad Base. Best Solutions. Tribological Behavior Friction Friction depends on surface finish of the mating surfaces

More information

High-Entropy Alloys. Breakthrough Materials for Aero Engine Applications? By Daniel Svensson, Gothenburg, 13/2 2015

High-Entropy Alloys. Breakthrough Materials for Aero Engine Applications? By Daniel Svensson, Gothenburg, 13/2 2015 High-Entropy Alloys Breakthrough Materials for Aero Engine Applications? By Daniel Svensson, Gothenburg, 13/2 2015 Presentation Outline 1. 2. 3. 4. 5. 6. Introduction High-Entropy Alloys Aero Engine Materials

More information

Synthesis and Characterization of SiC Reinforced HE-30 Al Alloy Particulate MMCs

Synthesis and Characterization of SiC Reinforced HE-30 Al Alloy Particulate MMCs Synthesis and Characterization of SiC Reinforced HE-30 Al Alloy Particulate MMCs Pradyumna Phutane *1, VijayKumar S. Jatti **2, Ravi Sekhar **3, T.P.Singh #4 * Research Scholar, Symbiosis Institute of

More information

Effect of Normal Load and Sliding Velocity on Friction Coefficient of Aluminum Sliding Against Different Pin Materials

Effect of Normal Load and Sliding Velocity on Friction Coefficient of Aluminum Sliding Against Different Pin Materials American Journal of Materials Science 2012, 2(1): 26-31 DOI: 10.5923/j.materials.20120201.05 Effect of Normal Load and Sliding Velocity on Friction Coefficient of Aluminum Sliding Against Different Pin

More information