Standard and Mini Split Line Sets
|
|
|
- Milo Griffin
- 6 years ago
- Views:
Transcription
1 For HVACR Applications Job Name Job Location Engineer Contractor Wholesaler Linesets, Inc. Rep Product Description: Linesets, Inc. Standard and Mini Split Line Sets are available in either an elastomeric, polyethylene or EPDM insulation for use in HVACR applications. All line sets will be manufactured in the United States. Material: Linesets, Inc. Standard and Mini Split Line Sets copper tube shall be made from C12200 grade of copper. is choice of elastomeric, polyethylene or EPDM material. All insulation have a UV retardant added but it is recommended to cover or apply a coating for long term exposure. Key Specifications: Linesets, Inc. Standard and Mini Split Lines Sets are made to meet the requirements of ASTM B1003 and can be used with synthetic refrigerants and sub-critical CO2 systems. Installation: Installations and insulation material shall comply with the latest applicable building codes for the local jurisdiction. MADE IN USA
2 Copper Tube Data Standard Line Sets with Elastomeric Liquid Line Suction Line Optional Finishes 50 1/4" - 1/2" 1-1/8" 10' - 50' using 5' intervals; 60' & 100' 1-1/2" Flare nuts, 90-degree bends, custom connections, thermostat wire and taping Mini Split Line Sets with Elastomeric Liquid Line Suction Line Optional Finishes 50 1/4" - 3/8" 7/8" 15' - 50' using 5' intervals; 100' 1-1/2" Insulated liquid and suction lines and twin tube system, flare nuts, 90-degree bends, custom connections, mini-split wire or control cable and taping Line Sets with White 50 1/4" - 7/8" 35, 50', 100', 164' 1/2" - 3/4 Line Sets with EPDM Optional Finish 50 1/4" - 1-1/8" using 5 intervals 1-1/2 Flare nuts, 90 dergree bends,custom connections, thermostat wire and taping
3 : R Values Standard and Mini Split Line Sets Elastomeric Data Pipe Size Nom. 3/8" Nom. 1/2" Nom. 3/4" Nom. 1" ASTM C 534, Type II Sheet Grade 1 ASTM C 1534 ASTM E 84, NFPA 255, U L 723 CAN/ULC S102 NFPA 90A, 90B ASTM G21/C1338 ASTM G22 Physical Properties: ASTM D 1056, 2B1 MIL-P-15280J, FORM S MIL-C-3133C (MIL STD 670B), Grade SBE 3 MEA M UL 181 UL 94 5V-A, V-0, File E City of Los Angeles RR 7642 Specifications Values Test Method Thermal Conductivity, Btu in./h ft2 F (W/mK) 75 F Mean Temperature (24 C) 90 F Mean Temperature (32 C) 0.25 (0.036) (0.037) ASTM C 177 or C 518 Water Vapor Permeability, Perm-in. [Kg/(s m Pa)] 0.05 (0.725 x 10 13) ASTM E 96, Procedure A Flame Spread and Smoke Developed Index through 1 (25mm)* 25/50* Mold Growth Fungi Resistance Bacterial Resistance 1/4" /8" /2" /8" /4" /8" /8" UL181 ASTM G21/C1338 ASTM G22 ASTM E 84 CAN/ULC S102 Water Absorption, % by Volume 180/220 F (82/105 C) ASTM C 209 Upper Use Limit 220 F (105 C) Lower Use Limit -297 F (-183 C) Ozone Resistance GOOD Nom. 1-1/2"
4 Polyethylene Data : Wall thickness is 1/2-3/4 and product is made according to ASTM C (insulation material for use on typical commercial system non-cross-linked) R Value: 1/2 Wall = R3 3/4 Wall = R5 Description Specifications Notes Water Vapor Permeability ASTM E96-00 r =4*10-5 [mg/(h*m*pa)] Working Temperature ASTM C Type I (tubular), Grade I Surface Burning Characteristics ASTM E84 (25/50) Flame & Spread Index Less Than 25 & Smoke Development Index less than 50 Thermal Conductivity ASTM C ISO EN 8497 k at 104 F (average temperature) = (Btu in.)/sq.ft. F h) λ at 40 C (average temperature) = W/(m*K) WARNING: This product includes polyethylene (PE) foam insulation. Although this product meets ASTM E84 25/50 flame/smoke index, PE foam insulation may nonetheless be highly flammable when ignited. To reduce the risk of fire spread, property damage, or personal injury, great caution should be exercised when using this product in proximity to any ignition sources or open flames.
5 : R Values Pipe Size Wall 1-1/2 1/4" /8" /2" /8" /4" /8" /8" 10.1 Standard and Mini Split Line Sets EPDM Data ASTM C 534, Type II Sheet Grade 1 ASTM C 1534 ASTM E 84, NFPA 255, U L 723 CAN/ULC S102 NFPA 90A, 90B ASTM G21/C1338 ASTM G22 ASTM D 1056, 2B1 MIL-P-15280J, FORM S MIL-C-3133C (MIL STD 670B), Grade SBE 3 MEA M UL 181 UL 94 5V-A, V-0, File E City of Los Angeles RR 7642 Physical Properties: Specifications Values Test Method Thermal Conductivity, Btu in./h ft2 F (W/mK) 75 F Mean Temperature (24 C) 90 F Mean Temperature (32 C) 0.25 (0.036) (0.037) ASTM C 177 or C 518 Water Vapor Permeability, Perm-in. [Kg/(s m Pa)] 0.05 (0.725 x 10 13) ASTM E 96, Procedure A Flame Spread and Smoke Developed Index through 1 (25mm)* 25/50* Mold Growth Fungi Resistance Bacterial Resistance UL181 ASTM G21/C1338 ASTM G22 ASTM E 84 CAN/ULC S102 Water Absorption, % by Volume 180/220 F (82/105 C) ASTM C 209 Upper Use Limit 220 F (105 C) Lower Use Limit -297 F (-183 C) Ozone Resistance GOOD
Tube Insulation. Fiber Free
Fiber Free Tube Insulation Fiber-free, flexible, elastomeric pipe insulation for reliable protection against condensation, mold, energy loss and ultraviolet radiation in residential and commercial applications
Armacell Product Selection Guide
Armacell Product Selection Guide Guide for selecting fiber-free, mold-resistant mechanical insulation from the makers of Armaflex The IAQ Insulation Exclusive EPA-registered antimicrobial Supports LEED
Redi-Klad 1000 Pipe Insulation
Knauf Data Sheet PE-DS-16e 12-09 Redi-Klad 1000 Pipe Insulation with ECOSE Technology Knauf Redi-Klad 1000 F Pipe Insulation with ECOSE Technology is offered across a wide range of sizes. For iron pipe
PRODUCT SELECTION GUIDE
Fiber Free PRODUCT SELECTION GUIDE Quick guide for selecting fiber-free, mold-resistant mechanical insulation from the makers of Armaflex GREENGUARD Certified products are certified to GREENGUARD standards
GUIDE SPECIFICATION: DUCT LINER
GUIDE SPECIFICATION: DUCT LINER This specification guide includes thermal & acoustical insulation for ductwork and air handling systems. This section is based on the format recommended by MICA (Midwest
A. Deliver material to job site in original, nonbroken, factory packaging, labeled with manufacturer's density and thickness.
SECTION 15250 PIPING AND EQUIPMENT INSULATION PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract including General and Supplementary Conditions, Division 1 Specification
Design & Construction Standards, Revised January
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
Insulation Board. Knauf Data Sheet PE-DS
Insulation Board Knauf Data Sheet PE-DS-2 12-06 Insulation Board Description Knauf Insulation Board is a thermal and acoustical insulation product made from inorganic glass fibers preformed into boards
Earthwool Redi-Klad 1000 Pipe Insulation
Data Sheet CI-RK-DS 12-15 Earthwool Redi-Klad 1000 Pipe Insulation Knauf Insulation Earthwool Redi-Klad 1000 pipe insulation is a multi-purpose, molded, heavy-density, one-piece glass mineral wool insulation
Insulation for VRF/VRV HVAC Systems. Variable Refrigerant Flow(VRF) and Variable Refrigerant Volume(VRV) System Insulation Needs
Insulation for VRF/VRV HVAC Systems Variable Refrigerant Flow(VRF) and Variable Refrigerant Volume(VRV) System Insulation Needs Well Sealed, Skill/Detail High Level of Craftsmanship Complete Insulation
Thermasheath -3. Insulation for the Building Envelope ROOF WALL SPECIALTY
Insulation for the Building Envelope ROOF WALL SPECIALTY PRODUCT DESCRIPTION Rmax Thermasheath-3 is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (polyiso) foam
International Fireproof Technology Inc.
International Fireproof Technology Inc. The Ultimate in Firestop Solutions and Fire Protective Coatings www.painttoprotect.com 949-975-8588 Guide Specifications Alternate Thermal and Ignition Barrier IFRM
Heat-Shrinkable Tubing
CPO 2:1 Shrink Ratio Thin-Wall Tubing, Non-Lined Flame-retardant, cross-linked polyolefin Continuous operating temperature: -55 C to 135 C Shrink temperature of 120 C Meets UL and CSA standards; MIL-DTL-23053/5
Chilled Water. Product performance for insulation of chilled water piping
Chilled Water Product performance for insulation of chilled water piping ABOUT K-FLEX USA K-FLEX USA IS A LEADING MANUFACTURER of flexible, closed cell elastomeric insulation for mechanical piping, air
Master Specification WALLTITE Eco v.3 by BASF Canada Inc. Section SPRAY POLYURETHANE FOAM INSULATION Page 1
Page 1 WALLTITE ECO v.3 by BASF Canada Inc, is a thermal insulation intended for building enclosures, located in appropriate assembly locations in buildings during enclosure construction. This section
Single-Jacketed Tubing
Single-Jacketed Tubing COILED STICK CUT TO LENGTH UTC Single Jacketed tube Protect the tube against corrosion and pitting in a diverse changing environment and climates. The phenomenon of Chloride Stress
Aluminum Lagging Roll Jacketing Fittings
Product Catalog Aluminum Lagging DESCRIPTION ITW Pabco/Childers Aluminum Jacketing is the premier protective outer surface for mechanical insulation systems including pipe, vessels, and equipment. It protects
Sept 30, 2004 Page 1 PRODUCT DESCRIPTION PRODUCT FEATURES
Sept 30, 2004 Page 1 PRODUCT FEATURES BASIC USES / RELATED USES LOGIX Insulated Concrete Forms are stackable, interlocking expanded polystyrene (EPS) blocks that serve as permanent formwork to create solid
FIRE STATION 55 June 14, 2010
SECTION 15250 MECHANICAL INSULATION PART 1 - GENERAL 1.01 DESCRIPTION A. Work Includes 1. Insulation of Domestic Water Piping. 2. Pipe Insulation of refrigerant piping. 3. Insulation of ductwork. 4. Aluminum
TSX Insulation for Exposed Use ROOF WALL SPECIALTY
Insulation for Exposed Use ROOF WALL SPECIALTY PRODUCT DESCRIPTION Rmax TSX-8500 is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (Polyiso) foam core bonded to
Tel: Fax:
This Specification Section is provided in CSI format for engineers and architects specifying fiberglass insulation manufactured by Knauf GmbH. in Shelbyville, Indiana. Delete insulation types not required
Since Ebrille Industries Group, experience and passion
Made in Italy Since 1932 The Ebrille background story was chiselled out by passionate men. The perseverance and far-sightedness of this family run business has been rewarded with important international
Knauf Data Sheet PE-DS-2e Insulation Board. with ECOSE Technology
Knauf Data Sheet PE-DS-2e 8-09 Insulation Board with ECOSE Technology Insulation Board with ECOSE Technology Description Knauf Insulation Board with ECOSE Technology is a thermal and acoustical insulation
IEEE 1580 Type P MOR Polyrad XT-125 Multi Conductor
TABLE OF CONTENTS SECTION SUBJECT PAGE I. SCOPE...1 II. APPLICABLE DOCUMENTS...1 III. CONDUCTOR...2 IV. SEPARATOR...2 V. INSULATION...2 A. Physical Properties...2 B. Electrical Properties...3 C. Qualification
DRAFT - MOCA STANDARD for Fiber-Reinforced Magnesium Cement Board
1. Scope 1.1 This standard defines the minimum prescriptive quality and performance requirements for Fiberreinforced Magnesium Cement Board products intended for use in buildings in North America. For
Ammonia. Product performance for insulation of ammonia piping
Ammonia Product performance for insulation of ammonia piping ABOUT K-FLEX USA K-FLEX USA IS A LEADING MANUFACTURER of flexible, closed cell elastomeric insulation for mechanical piping, air handling units
June 1, 2010 PARTIES INTERESTED IN EVALUATION REPORTS ON REFLECTIVE FOIL INSULATION
June 1, 2010 TO: PARTIES INTERESTED IN EVALUATION REPORTS ON REFLECTIVE FOIL INSULATION SUBJECT: Proposed Revisions to the Acceptance Criteria for Reflective Foil Insulation, Subject AC02-0610-R1 (LS/RB)
OptiLiner Banded Liner System, Thermal, Metal Building
PROJECT ENGINEER RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment.
DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: RHINO LININGS CORPORATION
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-2100 Reissued 02/2017 This report is subject to renewal 02/2018. DIVISION: 07 00
CERTIFICATIONS AND LISTINGS
CERTIFICATIONS AND LISTINGS REHAU PEXa Tubing, Effective October 2017 TABLE OF CONTENTS Table 1: REHAU Certifications and Listings 1. REHAU PEX Tubing..................................4 2. Fire-rated Assembly
(Project Location) (your firm's name)
SECTION 07 21 00 THERMAL INSULATION PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including the Conditions of the Contract and Division 01 Specification Sections
May 19, 2006 Page 1 PRODUCT DESCRIPTION PRODUCT FEATURES
May 19, 2006 Page 1 BASIC USES / RELATED USES PRODUCT FEATURES Expanded polystyrene (EPS) void form material designed to be used under structural slabs to prevent heaving caused by upward movement of the
Thermasheath-XP. Insulation for Exposed Use
Insulation for Exposed Use PRODUCT DESCRIPTION Rmax Thermasheath-XP is an energy-efficient thermal insulation board composed of a closed-cell polyisocyanurate (Polyiso) foam bonded to durable, embossed
SECTION PIPING INSULATION
SECTION 23 07 19 PIPING INSULATION PART 1 - GENERAL 1.1 SUMMARY A. Section includes: 1. Piping insulation for refrigerant piping within building envelope. 2. Furnishing and installation of insulation.
TECHNICAL BULLETIN POLYISOCYANURATE VS. CELLULAR GLASS IN LOW TEMPERATURE MECHANICAL INSULATION
TECHNICAL BULLETIN 0114 1 POLYISOCYANURATE VS. CELLULAR GLASS IN LOW TEMPERATURE MECHANICAL INSULATION PURPOSE This Technical Bulletin is an update in our series of white papers aimed at providing our
BuildingName The Description of the Project P DOCUMENTS
P00000000 0000 DOCUMENTS ARCHITECTURE ENGINEERING AND CONSTRUCTION ARCHITECTURE & ENGINEERING 326 East Hoover, Mail Stop B Ann Arbor, MI 48109-1002 Phone: 734-764-3414 Fax: 734-936-3334 SPECIFICATION DIVISION
University of Delaware
University Contact: Energy & Engineering Group (302) 831-1744 SECTION 23 07 00_ HVAC INSULATION PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Piping system insulation. 2. Equipment insulation. 3.
Submittal for Aquatherm Piping System
Submittal for Aquatherm Piping System Project Name: Project Location: Date: To whom it may concern, We are proposing to upgrade the piping parts on the above project to the polypropylene Aquatherm Green
DSC BUILDING 1200 ALTERATIONS OCTOBER 2011 SECTION DUCT INSULATION
SECTION 230713 DUCT INSULATION PART 1 GENERAL 1.1 SUMMARY A. Related Sections: 1. 233113 Ductwork and Accessories 1.2 REFERENCES A. American Society for Testing and Materials (ASTM): 1. E84-96a Test Method
EcoTouch Insulation with PureFiber Technology
PROJECT ENGINEER RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment.
Knauf Data Sheet CI-DLS-DS Sonic XP. Duct Liner. with ECOSE Technology
Knauf Data Sheet CI-DLS-DS 04-14 Sonic XP with ECOSE Technology Duct Liner Sonic XP Duct Liner with ECOSE Technology Description Knauf Insulation Sonic XP Duct Liner is a flexible, mat-faced insulation
Residential Product Selector Guide
Residential Product Selector Guide Innovative Home Insulation Solutions Air Handling System Products Flexible Air Duct with Flex-Glas PC Insulation Microlite XG Fiber Glass Duct Wrap Fiber Glass Building
A. Source Limitations: Obtain each type of building insulation through one source.
SECTION 07210 - BUILDING INSULATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
Fire Protection Products
wwww Fire Protection Products Product Data Sheet April / 2017 Product Description Product Features Applications Specifications 3M Fire and Water Barrier Tape is a self-adhered membrane that provides a
RTF8510A Base. RTF8510B Curing Agent Color Black Beige Viscosity (cps) 9,000 6,000 Specific Gravity
Technical Data Sheet RTF8510 Description RTF8510 silicone rubber foam is a liquid compound which cures at room temperature to a medium density foam with the addition of a curing agent. The product is a
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD. ANSI/SCTE (Formerly IPS SP 100)
ENGINEERING COMMITTEE Interface Practices Subcommittee AMERICAN NATIONAL STANDARD ANSI/SCTE 15 2006 (Formerly IPS SP 100) Specification for Trunk, Feeder and Distribution Coaxial Cable NOTICE The Society
DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION SECTION: WATER-RESISTIVE BARRIERS/WEATHER BARRIERS
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-1504 Reissued 03/2017 This report is subject to renewal 03/2018. DIVISION: 07 00
Highlights of DANA Insulated Sandwich Panels
Highlights of DANA Insulated Sandwich Panels DANA Sandwich Panels are manufactured in automatic sandwich panel press with Polyurethane foam injection.combination of wide variety of facing materials, surface
Gold Bond BRAND Gypsum Sheathing
BRAND 09 06 29 16 00/NGC 43/NGC brand is a moisture-resistant sheathing installed on the outside of exterior framing as a substrate for exterior claddings. It is manufactured with a treated water-resistant
THERMOFIT ADHESIVE S Flex Fluid Resistant, High Temperature, One Part-Flexible Epoxy
TE Connectivity 30 Constitution Drive Menlo Park, CA 9402 USA SPECIFICATION THIS ISSUE: DATE: REPLACES: RT-1014 ISSUE 4 April 19, 2016 Issue 3 1. SCOPE THERMOFIT ADHESIVE S-12-04 Flex Fluid Resistant,
Building Envelope Design using ROXUL (BEDR ) FIREWALL and ROXUL PLUS MB. Fire Rated Board Insulation for Pre-Engineered Metal Buildings
BUILDING ENVELOPE DESIGN USING ROXUL Building Envelope Design using ROXUL (BEDR ) FIREWALL and ROXUL PLUS MB Fire Rated Board Insulation for Pre-Engineered Metal Buildings ROXUL FIREWALL & ROXUL PLUS MB
SECTION PERMANENT FORMS Insulating Concrete Forms Rev
SECTION 03 11 19 PERMANENT FORMS Insulating Concrete Forms Rev 5.20.14 PART 1 GENERAL 1.01 SUMMARY A. Supply and installation of permanent insulating concrete forms as formwork, placement of steel reinforcement
MILITARY SPECIFICATION. PLASTIC MOLDING and EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK)
20 June l984 1. SCOPE MILITARY SPECIFICATION PLASTIC MOLDING and EXTRUSION MATERIAL, POLYETHERETHERKETONE (PEEK) This specification is approved for use by all Departments and Agencies of the Department
July 23, 2010 PARTIES INTERESTED IN REFLECTIVE FOIL INSULATION
July 23, 2010 TO: SUBJECT: PARTIES INTERESTED IN REFLECTIVE FOIL INSULATION Revisions to the Acceptance Criteria for Reflective Foil Insulation, Subject AC02-0610-R1 (LS/RB) Dear Madam or Sir: In June
DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC.
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 4073 Issued 08/2017 This report is subject to renewal 08/2018. DIVISION: 07 00 00
K-FLEX K-FLEX ST 74 A NEW GENERATION OF INSULATION MATERIALS
K-FLEX 74 A NEW GENERATION OF INSULATION MATERIALS /SK pre-cut pipe insulation with adhesive sheets tubes Elastomeric insulation for all applications, both civil and industrial. Applications: Air-conditioning
Shrink-Kon Thin Wall Heat Shrinkable Tubing
Shrink Ratio 2:1 Shrink-Kon Thin Wall Tubing Styles 2:1 Shrink Ratio, Non-Lined Flame retardant. Resistant to common fluids and solvents. Meets UL 224, 125 C; CSA C22.2 No. 198.1, 125 C; MIL-DTL-23053/5
Earthwool Insulation Board with ECOSE Technology
Data Sheet CI-IB-DS 12-15 Earthwool Insulation Board with ECOSE Technology Knauf Insulation Earthwool Insulation Board is a versatile product for thermal and acoustical applications such as heating and
Closed cell expanded polystyrene (EPS) insulation with graphite.
February 20, 2012 Page 1 PRODUCT FEATURES DESCRIPTION USES Closed cell expanded polystyrene (EPS) insulation with graphite. Below grade applications: Perimeter insulation for grade beams and foundation
FM APPROVED. FIRE PERFORMANCE Differences Between Elastomeric and Polyethylene/Polyolefin Insulations
FIRE PERFORMANCE Differences Between Elastomeric and Polyethylene/Polyolefin Insulations Why a 5/50 rating alone does not assure fire safety FM APPROVED FIRE PERFORMANCE: A 5/50 RATING DOES NOT ASSURE
Originally Issued: 05/03/2013 Revised: 06/06/2016 Valid Through: 05/31/2017
EVALUATION SUBJECT: AA-2 VAPOR SHIELD, M-SHIELD, SILVER SHIELD RADIANT BARRIER, FSK SHIELD, RBI SHIELD AND VR PLUS SHIELD REPORT HOLDER: Fi-Foil Company, Inc. P.O. Box 800 612 Bridgers Ave. West Auburndale,
Trusted ICC ES DIVISION: ATLANTA, CGF PRO, ENERGYS. Look. Conformity! Evaluation. ICC-ES Evaluation
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.orgg DIVISION: 07 00 00 THERMAL AND MOISTURE PROTECTION SECTION: 07 21 00 THERMAL INSULATION
Custom-Designed Clamps. Machined Versions. Online Configurator for Custom-Designed Clamps A56.
Custom-Designed Clamps Machined Versions Custom-designed clamping systems for pipes, tubes, hoses, cables and other components according to customer`s specifications or based on developments, made of thermoplastics,
Pipe & Equipment Insulations Product Selection Guide
Fiber Glass Insulation Pipe & Equipment Insulations Product Selection Guide Icon Key Thermal Acoustical Fire Resistance Moisture Control Formaldehyde-free products for improved indoor air quality For more
INTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60502-1 Second edition 2004-04 Power cables with extruded insulation and their accessories for rated voltages from 1 kv (U m = 1,2 kv) up to 30 kv (U m = 36 kv) Part 1: Cables
Air and Vapor Barrier 3015
Air and Vapor Barrier 3015 Technical Data March 2017 Product Description 3M Air and Vapor Barrier 3015 is an air, moisture and water impermeable membrane with an aggressive, high-tack acrylic pressure
K-FLEX. K-FLEX Tapes. for HVAC and industrial application
NAME January PRODUCT 2016 Tapes for HVAC and industrial application TAPES INDEX TAPES Pg. 2 ALU Tapes ALU AA CW TAPE Pg. 4 ALU AR CW TAPE Pg. 5 ALU BLACK CW TAPE Pg. 6 FSK FACING TAPE Pg. 7 Special Tapes
1. Division 23 Section "Hangers and Supports for HVAC Piping and Equipment" for pipe insulation shields and protection saddles.
SECTION 23 07 19 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
SECTION REFLECTIVE-FACED, MASONRY CAVITY WALL INSULATION
MANUFACTURER S GUIDE SPECIFICATIONS SECTION 04 27 23 REFLECTIVE-FACED, MASONRY CAVITY WALL INSULATION 900 Hensley Lane Wylie TX 75098 800-527-7092 www.carlisleccw.com 07.09.13 Carlisle and R2+ are trademarks
2. A preconstruction meeting with the TWA s staff is required prior to initiating construction.
General: 1. Construct utilities in accordance to TWA approved plans and shop drawings. Any deviation from the approved plans shall be approved by the DEVELOPER S ENGINEER and TWA 2. A preconstruction meeting
Eclipse Air Duct Board
Knauf Data Sheet AH-DS-10e 03-12 Eclipse Air Duct Board with ECOSE Technology Eclipse Air Duct Board with ECOSE Technology Description Knauf Insulation Eclipse Air Duct Board with ECOSE Technology is a
REPORT HOLDER: THE DOW CHEMICAL COMPANY 1501 LARKIN CENTER DRIVE MIDLAND, MICHIGAN EVALUATION SUBJECT:
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3089 Reissued 07/2016 This report is subject to renewal 07/2018. DIVISION: 07 00
Mechanical Insulation for Refrigeration Systems
Mechanical Insulation for Refrigeration Systems INDUSTRIAL REFRIGERATION CONSORTIUM RESEARCH & TECHNOLOGY FORUM MAY 2-3, 2012 Peter Gauchel, President/CEO L&C Insulation Inc. Overview Current trends in
SECTION HVAC INSULATION
PART 1 GENERAL 1.1 SUMMARY SECTION 23 07 00 HVAC INSULATION A. Section Includes: 1. Ductwork insulation. 2. Duct liner. 3. Insulation jackets. 4. Equipment insulation 5. Piping system insulation. 6. Insulation
ProRox 400 Series. Fabricated Industrial Solutions
ProRox 400 Series Fabricated Industrial Solutions ROXUL Fabricated Insulation Solutions The ProRox 400 Series fabricated product line offers board (slab) insulation solutions that can be fabricated into
REFLECTIVE INSULATION, RADIANT BARRIERS, AND INTERIOR RADIATION CONTROL COATINGS FOR USE IN PRE-ENGINEERED METAL BUILDINGS
Technical Bulletin #107 REFLECTIVE INSULATION, RADIANT BARRIERS, AND INTERIOR RADIATION CONTROL COATINGS FOR USE IN PRE-ENGINEERED METAL BUILDINGS Scope: In both the United States and Canada there is significant
Application Specification:
Application Specification: GacoFireStop2 F5001 (Half-Pound) March 2014 Supersedes 7/11 Division: 07 21 19 GUIDE SPECIFICATION GacoFireStop2 F5001 INSULATION PART 1 GENERAL This guide specification discusses
Firestop and Fire Protection Systems
Firestop and Fire Protection Systems Leading-edge Technology. Outstanding Service. 156 Firestop sealants and sprays Elastomeric silicon sealant CP 601S Flexible firestop sealant CP 606 Firestop sealant
Responsibilities: Effective Date: November Revision Date: January 27, VP, Facilities and Construction Management
Title: Fire Safety Requirements for Interior Finish Materials Procedure Effective Date: November 2005 Revision Date: January 27, 2017 Issuing Authority: Responsible Officer: VP, Facilities and Construction
American Society of Agricultural and Biological Engineers
ANSI/ASAE S401.2 FEB1993 (R2012) Guidelines for Use of Thermal Insulation in Agricultural Buildings American Society of Agricultural and Biological Engineers ASABE is a professional and technical organization,
FABROCK ROXUL. Versatility and quality customized for you. roxul.com
ROXUL Versatility and quality customized for you. FABROCK roxul.com Facing FABROCK comes with a variety of surface facing options to meet the aesthetic or functional needs of your application. Please contact
SECTION HVAC INSULATION
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections, apply to this Section. B. Related
Acoustical Surfaces, Inc.
Acoustical Natural Cotton Fiber Insulation Acoustical PERFORMANCE ACOUSTIC (www.acousticalsurfaces.com) Controlling sound and noise transmission through walls, ceilings, and floors can be a complex challenge
DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: NATURAL POLYMERS, LLC
0 Most Widely Accepted and Trusted ICC-ES Evaluation Report ICC-ES 000 (800) 423-6587 (562) 699-0543 www.icc-es.org ESR-3136 Reissued 06/2017 This report is subject to renewal 06/2018. DIVISION: 07 00
600 VOLT 600V, 3 CONDUCTOR (WITH GROUND), FR-EPR OR FR-XLPE INSULATION, PVC JACKET SPECIFICATIONS (FLAME RETARDANT POWER CABLE) (UL TYPE TC-ER) TYPE C3 SPEC 70.0100 PROJECT 196116 REFERENCE: LATEST EDITIONS
Combustible Exterior Wall Cladding Systems: An ICC Perspective
Combustible Exterior Wall Cladding Systems: An ICC Perspective The tragic Grenfell Tower fire in London brought extensive public focus on combustible exterior wall systems, often called cladding, prompting
Cryogenic Pipe Support Systems
Cryogenic Pipe Support Systems Overview Rilco cryogenic pipe supports are developed to support cold piping in various applications ranging from chilled water to liquefied natural gas. The qualified service
TECHNICAL BULLETIN 0214 (update of 0111) PERFORMANCE/COST COMPARISON OF POLYISO vs. XPS PIPE INSULATION SYSTEMS
Page 1 of 5 TECHNICAL BULLETIN 0214 (update of 0111) PERFORMANCE/COST COMPARISON OF POLYISO vs. XPS PIPE INSULATION SYSTEMS PURPOSE Increased focus on energy savings and improvements in the properties
Reflective Insulation Specification & Application Guide for Post Frame and Metal Building Construction
Reflective Insulation Specification & Application Guide for Post Frame and Metal Building Construction WHAT IS PLY-FOIL? Ply-Foil is a multilayer, reflective insulation which comes in rolls consisting
Short Form Guide Specification. STYROFOAM CAVITYMATE Ultra Air Barrier Wall System
Short Form Guide Specification STYROFOAM CAVITYMATE Ultra Air Barrier Wall System November 2011 DISCLAIMER: The manufacturer has reviewed the product information contained in this short form specification.
EDITION: EXPORT - PUBLISHED: 11/2013 NEW PRODUCT NAMES. ProRox. Product catalogue. Industrial insulation
EDITION: EXPORT - PUBLISHED: 11/2013 PRODUCT S ProRox Industrial insulation Product catalogue We share our knowledge to your advantage ROCKWOOL Technical Insulation a subsidiary of the ROCKWOOL Group develops
First Revision No NFPA [ Section No ]
![First Revision No NFPA [ Section No ]](/thumbs/79/80122011.jpg "First Revision No NFPA [ Section No ]")
National Fire Protection Association Report of 17 http://submittals.nfpa.org/terraviewweb/contentfetcher?commentpara... 10/21/2015 9:28 AM First Revision No. 4502-NFPA 101-2015 [ Section No. 3.3.92.4 ]
General Rules for Underground Polyethylene Pipe in Propane Applications:
Eliminate General Rules for Underground Polyethylene Pipe in Propane Applications: For Outdoor Applications For Below Grade/Underground Applications For LP Gas Vapor Service Maximum Pressure of 30 psig
DIVISION: THERMAL AND MOISTURE PROTECTION SECTION: THERMAL INSULATION REPORT HOLDER: DEMILEC (USA) INC.
0 Most Widely Accepted and Trusted ICC ES Evaluation Report ICC ES 000 (800) 423 6587 (562) 699 0543 www.icc es.org ESR 3883 Reissued 08/2017 This report is subject to renewal 04/2018. DIVISION: 07 00
Thermal Insulation
University of New Hampshire University of New Hampshire Scholars' Repository Division 07 Thermal and Moisture Protection Chapter 5 Technical Construction and Renovation Standards 1-25-2013 072100 - Thermal
ROOFS ROOFS WALLS FLOORS. Energy efficiency for constructions... Always environment-friendly...
PRODUCT CATALOG Energy efficiency for constructions... Always environment-friendly... www.prodexcr.com CONSTRUCTION AREA REFLECTIVE THERMAL INSULATION AD AD= ALUMINUM + ALUMINUM 0,39; 0,19; and 0,11 in
ESR-2072 Reissued September 1, 2013 This report is subject to renewal September 1, 2015.
ICC-ES Evaluation Report www.icc-es.org (800) 423-6587 (562) 699-0543 ESR-2072 Reissued September 1, 2013 This report is subject to renewal September 1, 2015. A Subsidiary of the International Code Council
THERMOFIT RNF-100 TUBING Polyolefin, Flexible, Heat-Shrinkable
Tyco Electronics Corporation 300 Constitutional Drive Menlo Park, CA 94025 USA Specification This Issue: Date: Replaces: RT-350 Issue 17 April 9, 2004 Issue 16 THERMOFIT RNF-100 TUBING Polyolefin, Flexible,