China Yangzhou plant

Size: px
Start display at page:

Download "China Yangzhou plant"

Transcription

1 China Yangzhou plant TM

2 Marcegaglia China 714,000 sqm total area 153,000 sqm first phase covered area EN norms production quality standards Precision tubes from carbon and stainless steel Beijing Yangzhou Shanghai Macau Taiwan Hong Kong

3 Marcegaglia China spreads over a land of 714,000 m 2 located in Guangling Industrial Park, Yangzhou (270 km from Shanghai). The first phase of plant development includes 153,000 m 2 of covered production area equipped with European manufacturing systems, plus a 4,200 m 2 office building. Marcegaglia tubular production is being implemented in complete accordance with EN norms including raw materials procurement, production, quality control, on time delivery and after-sale service, in order to supply top level complete solutions to our customers.

4 Quality and environment ISO 9001:2000 ISO ISO OHSAS ISO/TS 16949

5 strict compliance with EN norms including raw materials procurement, production, quality control, delivery, after-sale-service; same level of environmental standards required in EU is currently implemented; all major certifications in the sector are being applied for manufacturing is compliant with the latest energy saving criteria; highest level of service to comply with Marcegaglia worldwide standards.

6 Product Range Marcegaglia China has implemented its production chain with investments aimed to higher technological standards for its products. A highly skilled staff of technicians and quality assurance specialists employed in permanent research and development activities has earned Marcegaglia the most important international certifications for products and processes.

7 CARBON STEEL PRODUCTS Carbon steel welded tubes Cold-drawn precision tubes Refrigeration tubes STAINLESS STEEL PRODUCTS Stainless steel welded tubes SERVICE CENTER

8 Carbon steel welded tubes Min. thickness (mm) 1,50 Max. thickness (mm) 16,00 Min. diameter (mm) 20 Max. diameter (mm) 254 SUPPLY CONDITIONS - Dimensional tolerances according to manufacturing standard - Special tolerances upon request - Control documents 2.1, 2.2, 3.1, 3.2 according to EN and specific norm requirements

9 Carbon steel welded tubes Round carbon steel welded precision tubes Square carbon steel welded precision tubes Rectangular carbon steel welded tubes

10 Main manufacturing standards MANUFACTURING STANDARD PRODUCT DESIGNATION TREATMENT GRADE* SURFACE CONDITIONS EN Round and shaped precision tubes +CR1 Welded and sized +A Annealed +N Normalized +CR2 Welded and sized E190, E320, E220, E370, E260, E420 E155, E195, E235, E275, E355 S1 From hot-rolled strip, black S2 From hot-rolled strip, pickled S3 From cold-rolled strip S4 From coated strip EN Square and rectangular precision tubes EN Cold formed welded structural tubes (CE homologation) S235JRH S275J0H S275J2H S355J0H S355J2H (*) Upon request: supply of grades not included in the above mentioned standards

11 MANUFACTURING STANDARD PRODUCT DESIGNATION TREATMENT GRADE* TEST CATEGORIES EN EN Tubes for pressure purposes, for use at room temperature Tubes for pressure purposes, for use at high temperatures Heat treatments upon request P195 P235 P265 P195GH P235GH P265GH TR1 TR2 TC1 TC2 EN Steel pipes for pipelines for combustible fluids L235GA L290GA L360GA EN Tubes for the conveyance of water and other aqueous liquids L235 L275 L355 EN Tubes suitable for welding and threading Heat treatments upon request S195T (*) Upon request: supply of grades not included in the above mentioned standards

12 Typical applications Marcegaglia has developed a unique know-how in the manufacturing of precision tubes to meet the strict dimensional and surface specifications required by manufacturers in sectors such as furniture, sports equipment or mechanical engineering.

13 Typical applications The production program of Marcegaglia tubes from hot rolled, cold rolled and galvanized strip covers a wide range of structural and precision mechanical applications, guaranteeing specific suitability for subsequent processing. Precision tubes for steel structural work Precision tubes for piling Precision tubes for lifting equipment Roller conveyor tubes Precision tubes for pressure purposes Precision tubes for automotive applications Precision tubes for the cycle and motorcycle industry Precision tubes for heating and plumbing systems Precision tubes for fitness equipment Precision tubes for other industrial applications Precision tubes for the furniture industry

14 Cold-drawn precision tubes SUPPLY CONDITIONS - Tubes are supplied in 5000/8000 mm lengths unless otherwise specified in order - Dimensional tolerances according to manufacturing standard - Special tolerances upon request - Control documents 2.1, 2.2, 3.1, 3.2 according to EN and other specific norm requirements

15 Main manufacturing standards MANUFACTURING STANDARD PRODUCT DESIGNATION GRADE* TREATMENT +C Hard drawn.tubes are supplied with no heat treatment. +LC Cold-drawn softened. A mild drawing follows the last reduction drawing. EN Cold-drawn welded tubes E195 E235 E275 E355 +SR Stress Relieved Annealed. Low-temperature stress-relieving heat treatment which leaves the mechanical properties unchanged and increases the elongation to over 15%. +A Annealed. Annealing in controlled atmosphere. +N Normalised. Normalisation in controlled atmosphere. (*) Upon request: supply of grades not included in the above mentioned standards

16 OPTIONAL PROCESSING - Customer defined tolerances - Specific corrosion protection - Specific packaging - Drawing in reactive oil - Dephosphating STANDARD AND OPTIONAL TESTING - Visual test 100% - Laser dimensional test 100% - Non destructive eddy current test 100% acc. to EN Non destructive ultrasonic test 100% acc. to EN Chemical composition - Impact test - Mechanical property test

17 Typical applications Precision tubes for hydraulic applications Precision tubes for mechanical and automotive applications Mechanical properties, as well as strictly controlled dimensional tolerances, give cold-drawn tubes significant advantages for several precision applications.

18 Italy China Dedicated manufacturing plants based in Europe and Asia regularly supply the world markets with a specialized production program for the hydraulic cylinder industry and other automotive applications.

19 Product range Cold-drawn tubes for mechanical and automotive applications Cold-drawn tubes for cardans TECHNICAL CHARACTERISTICS TECHNICAL CHARACTERISTICS GRADE E195, E235, E275, E355 GRADE E195, E235, E275, E355 TREATMENT +C, +LC, +SR, +A, +N TREATMENT +C, +LC, +SR, +A, +N surface treatments Outside diameter and inside diameter: smooth as drawn (EN ) On request: roughness Ra < 0.4 m dimensional TOLERANCE Standard: according to EN Special: on request

20 Product range Ready-to-use cylinder tubes TECHNICAL CHARACTERISTICS GRADE E355 TREATMENT +C surface treatments Outside diameter: smooth as drawn (EN ) Inside diameter: roughness Ra < 0.80 m (average m) dimensional TOLERANCE Inside diameter: ISO H9 (ISO H10 for thickness < 4 mm) SUPPLY CONDITIONS - Standard packaging with plastic caps and strapped bundles, standard weight 2000 kg

21 Product range Cylinder tubes suitable for honing, skiving and roller burnishing Skived and roller burnished cylinder tubes TECHNICAL CHARACTERISTICS TECHNICAL CHARACTERISTICS GRADE E355 GRADE E355 TREATMENT +SR TREATMENT +SR surface treatments Outside diameter: smooth as drawn (EN ) surface treatments Outside diameter: smooth as drawn (EN ) Inside diameter: with stock allowance (for honing or skiving and roller burnishing) Inside diameter: roughness Ra < 0.40 m (average m) dimensional TOLERANCE Inside diameter: ISO H8

22 Product range Cold-drawn tubes suitable for chrome plating Chrome bars TECHNICAL CHARACTERISTICS TECHNICAL CHARACTERISTICS GRADE E355 GRADE CK45, 20MnV6 TREATMENT surface treatments +N, +SR Outside diameter: with stock allowance (for subsequent reworking) Inside diameter: smooth as drawn (EN ) dimensional RANGE surface treatments Diameter 20 mm - Chrome layer > 15 m Tolerances Ø ISO f8 Diameter > 20 mm - Chrome layer > 20 m Tolerances Ø ISO f7 Hardness of chrome layer Hv Roughness Ra < 0.15 m max - Rmax 3 m dimensional TOLERANCE Ovality 1/2 < ISO f7 Straightness 0.30 mm/m max mm/m max TEST Corrosion resistance test hours in neutral saline fog (100 hours): minimum rating 9 (ISO 9227)

23 Product range Cold-drawn tubes for telescopic cylinders TECHNICAL CHARACTERISTICS GRADE TREATMENT surface treatments E355 +SR Outside diameter: smooth as drawn (EN ) Inside diameter: roughness Ra < 1.6 m

24 Refrigeration tubes diameter mm nominal weight g/m 4, , , SUPPLY CONDITIONS - Outside diameter tolerance: nominal ±0,1 mm - Wall thickness tolerance +0,05 mm / -0,10 mm

25 TECHNICAL CHARACTERISTICS GRADE EN CR1 S3 E190 +N surface appearance Non-coated condition is supplied with slight surface oil and protected ends in order to allow the storage of tubes in proper warehouses and for a reasonable period of time Zinc coating with minimum thickness above 7 µ, equivalent to 50 g/m 2, in order to ensure red rust corrosion resistance in salt spray equal to 48 hours, measured according to ISO 9227 INTERNAL CLEANNESS AND HUMIDITY Guaranteed according to reference norm limits DIN 8964 GUARANTEED MECHANICAL CHARACTERISTICS Tensile strenght 300 MPa Yield point 180 MPa Percentage elongation at break L0=5,65 S0 25% Rm R0.2

26 Typical applications Tubes for condensers and refrigeration components Marcegaglia special range of refrigeration tubes is manufactured according to the specific sector norms and tolerances, and is thoroughly tested to allow use in applications such as condensers and evaporators for heating and cooling systems and household appliances.

27 Stainless steel welded tubes Global product range Min. thickness (mm) 0,40 Max. thickness (mm) 6,00 Min. diameter (mm) 5 Max. diameter (mm) 508 China product range Min. thickness (mm) 1,00 Max. thickness (mm) 6,00 Min. diameter (mm) 20 Max. diameter (mm) 254 SUPPLY CONDITIONS - Dimensional tolerances according to manufacturing standard - Special tolerances upon request - Control documents 2.2, 3.1, 3.2 according to EN and specific norm requirements

28 Main steel grades Metal structure GRADE TYPICAL CHEMICAL COMPOSITION EN AISI C Ni Cr Mo Ti Nb Mn Si P S N Cu Others Austenitic ,07 8,00-10,50 17,00-19, ,00 1,00 0,045 0,015 0, Austenitic L 0,03 8,00-10,00 17,50-19, ,00 1,00 0,045 0,015 0, Austenitic ,08 9,00-12,00 17,00-19,00-5xC-0,70-2,00 1,00 0,045 0, Austenitic L 0,03 10,00-13,00 16,50-18,50 2,00-2, ,00 1,00 0,045 0,015 0, Austenitic Ti 0,08 10,50-13,50 16,50-18,50 2,00-2,50 5xC-0,70-2,00 1,00 0,045 0, Austenitic S 0,20 11,00-13,00 19,00-21, ,00 1,50-2,50 0,045 0, Austenitic LN 0,030 3,50-5,50 16,00-17, ,00-8,00 1,00 0,045 0,015 0,15-0, Ni Alloy Inconel 600 0,15 72,00 14,70-17, ,00 0,50-0,015-0,50 - Ni Alloy Inconel 601 0,10 58,00-63,00 21,00-25, ,00 0,50-0,015-1,00 - Super Austenitic Ni Alloy Incoloy 825 0,05 38,00-46,00 19,50-23,50 2,50-3,50 0,60-1,20-1,00 0,50-0,030-1,50-3,00 Al 0, Incoloy 800 0,10 30,00-35,00 19,00-23,00-0,15-0,60-1,50 1,00-0,015-0,75 Al 0,15-0,60 Ferritic Li 0,03-10,50-12, ,00 1,00 0,040 0, Ferritic ,080-16,00-18,00 0,80-1,40 - [7X(C+N)+0,10]-1,00 1,00 1,00 0,040 0,015 0, Ferritic L 0,050-16,00-18,00 - [4x(C+N)+0,15]-0,80-1,00 1,00 0,040 0, Ferritic ,03-17,50-18,50-0,10-0,60 [3xC+0,30]-1,00 1,00 1,00 0,040 0, Ferritic ,025-17,00-20,00 1,80-2,50 [4x(C+N)+0,15]-0,80 1,00 1,00 0,040 0,015 0, Lean Duplex* S ,04 1,35-1,70 21,00-22,00 0,10-0, ,00-6,00 1,00 0,040 0,030 0,20-0, Duplex ,030 3,50-5,50 22,00-24,00 0,10-0, ,00 1,00 0,035 0,015 0,05-0,20 0,10-0,60 - Duplex ,030 4,50-6,50 21,00-23,00 2,50-3, ,00 1,00 0,035 0,015 0,10-0, (*) Outokumpu LDX 2101, Allegheny AL 2003 (*)

29 Main manufacturing standards EN , (A 270), (DIN 11850) Process pipes for the food and dairy industry PROCESS PIPES FOR FLUIDS EN , (DVGW GW541) EN , EN EN EN , (AD 2000 W2/W10), (PED 97/23) EN , (DIN 11866) Process pipes for drinkable water and press fitting Process pipes for water treatment Process pipes for the pulp and paper sector Process pipes for chemical applications Process pipes for pharmaceutical applications EN , (A 312 / A 778) Process pipes for oil and gas applications

30 MECHANICAL APPLICATIONS HEAT TREATMENT EN 10296, EN EN EN ASTM A 803 / A 803M - 03 ASTM A688 / A 688M - 04 EN , (A 249) (AD 2000 W2/W10). (PED 97/23) EN 10296, EN EN (AD 2000 W2/W10) Round tubes for pumps and cylinders Round tubes for elbows and fittings Round tubes for heat resistances Ferritic feedwater heater tubes Austenitic feedwater heater tubes Round tubes for heat exchangers Round tubes for evaporators for the sugar industry Round tubes for pressure vessels EN Tubes for boilers

31 CONSTRUCTION ORNAMENTAL EN (A 554) EN (A 554) Construction round tubes and box sections Ornamental round tubes and box sections

32 AUTOMOTIVE EN 10296, (A 554) EN 10296, (A 554) EN 10296, (A 554) Round tubes for automotive, exhaust systems Round tubes for automotive, hydroforming appliance Round tubes and box sections for automotive frame construction

33 Typical applications Precision tubes for for fluids Construction and ornamental precision tubes Precision tubes for mechanical and automotive applications Feedwater heater tubes for power plants

34 Marcegaglia stands out today as the world s top producer of stainless steel welded tubes with top-level certified manufacturing activities worldwide and an overall capacity of 400 thousand tons per year.

35 Round stainless steel welded tubes Round stainless steel welded tubes for heat resistances Round stainless steel welded process pipes for oil and gas Round stainless steel welded process tubes for heat exchangers/food and dairy industry Round stainless steel welded process tubes for drinkable water and press fitting Round stainless steel welded process tubes for the food and dairy industry Square stainless steel welded tubes Rectangular stainless steel welded tubes Oval stainless steel welded tubes Special stainless steel box

36 Service center The highly specialized service center machinery is dedicated to the the most diverse treatments and finishings of Marcegaglia product range of carbon and stainless steel tubes. Tailor-made services include cutting, end-finishing, special packaging and on-time scheduled delivery, plus a series of additional processing according to customer defined special requirements.

37 Standard and optional processing Suitability for subsequent galvanizing Complete normalization or weld area normalization Additional heat treatments Weld seam removing Special end finishing Cut to length Customer defined marking Restricted tolerances Welding position Surface roughness measurement Delivery with no corrosion protection Specific corrosion protection Specific packaging method Unit testing composed of tubes from a single casting Hot galvanization Drawing in reactive oil Dephosphating

38 No.1 Marcegaglia Road Guangling Industrial Park, Yangzhou P.R. China china@marcegaglia.com TM

marcegaglia RU Vladimir

marcegaglia RU Vladimir marcegaglia RU Vladimir Marcegaglia RU 70 000 sqm total area 14 000 sqm first phase covered area Vladimir St. Petersburg Moscow 42 000 sqm for development (covered) 25 000 t/y tube manufacturing capacity

More information

Marcegaglia USA Munhall

Marcegaglia USA Munhall Marcegaglia USA Munhall 1 Marcegaglia USA The Marcegaglia USA production facility is located in Munhall, PA (just outside Pittsburgh). It is devoted to the manufacturing of stainless steel, duplex and

More information

carbon steel welded precision tubes 80,000 sqm

carbon steel welded precision tubes 80,000 sqm Kluczbork plant Marcegaglia Poland The Marcegaglia manufacturing facility in Kluczbork, Poland was inaugurated in 2010 and is dedicated to the production of carbon steel welded precision tubes for a wide

More information

Marcegaglia do Brasil

Marcegaglia do Brasil Garuva plant Marcegaglia do Brasil 7 millions wire on tube condensers 240 millions meters of welded tubes for refrigeration 180.000 tons of electro-welded carbon tubes Brasília 20.000 tons of stainless

More information

TMK HYDRA ART INSIDE SKIVED AND ROLLER BURNISHED COLD FINISHED SEAMLESS STEEL TUBES and PISTON RODS TUBES FOR HYDRAULIC CYLINDERS

TMK HYDRA ART INSIDE SKIVED AND ROLLER BURNISHED COLD FINISHED SEAMLESS STEEL TUBES and PISTON RODS TUBES FOR HYDRAULIC CYLINDERS TMK HYDRA ART INSIDE SKIVED AND ROLLER BURNISHED COLD FINISHED SEAMLESS STEEL TUBES and PISTON RODS TUBES FOR HYDRAULIC CYLINDERS TMK is one of the world s leading producers of tubular products for the

More information

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25 TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140

More information

Jiangyin Donghao Stainless Steel Pipe Co., Ltd

Jiangyin Donghao Stainless Steel Pipe Co., Ltd Jiangyin Donghao Stainless Steel Pipe Co., Ltd March 12 th, 2018 Edition ISO 9001-2008, PED97/23/EC and ASME Boiler and Pressure Vessel Code Certificate certified. Built in 2005, Cover area over 30,000

More information

Our philosophy at your service

Our philosophy at your service CPC Inox is a leader in stainless steel since 1976 Our philosophy at your service Three production sites in Italy, sales branches in France (CPC Inox France) and Germany (CPC Inox Deutschland): CPC Inox

More information

T Z M r o d ( f u l l y w o r k e d ) PS- I H R 1 0 1

T Z M r o d ( f u l l y w o r k e d ) PS- I H R 1 0 1 Scope: PLANSEE SE Controlled document acc. to QR-04; this does not apply to hard copies 1. Dimensions and s 1.1 and guaranteed production s ground 0.50-0.99 ± 0.007 1.00-1.99 ± 0.010 2.00-2.99 ± 0.015

More information

BOILER INDUSTRY TUBES

BOILER INDUSTRY TUBES KWK STEEL FEATURED PRODUCT BOILER INDUSTRY TUBES Dominant Goods: Boiler Tubes, Condenser Tubes, Heat Exchanger Tubes, Cooler Tubes, etc. Available Standard: ASTM A106, A179, A192, A210, DIN17175, EN10216-2

More information

Plymouth Feedwater Heater Tubing F O R T H E P O W E R G E N E R AT I O N I N D U S T R Y

Plymouth Feedwater Heater Tubing F O R T H E P O W E R G E N E R AT I O N I N D U S T R Y Plymouth Feedwater Heater Tubing F O R T H E P O W E R G E N E R AT I O N I N D U S T R Y P L Y M O U T H F E E D W A T E R H E A T E R T U B I N G THE CHOICE OF UTILITY ENGINEERS AND FABRICATORS Products

More information

M o l yb d e n u m rod ( f u l l y w o r k e d ) PS- I H R 1 0 0

M o l yb d e n u m rod ( f u l l y w o r k e d ) PS- I H R 1 0 0 Scope: PLANSEE SE Controlled document acc. to QR-04; this does not apply to hard copies This specification defines fully worked molybdenum rods, produced in a diameter range of 0.5-140 mm (special size

More information

STANDARD FERRITIC STAINLESS STEELS

STANDARD FERRITIC STAINLESS STEELS T e c h n i c a l B r o c h u r e STANDARD FERRITIC STAINLESS STEELS Unity AISI UNS EN U-40910 409 S40910 1.4512 U-430 430 S43000 1.4016 U-430DDQ 430 S43000 1.4016 U-439 439 S43035 1.4510 - S43940 U-1.4509

More information

SEAMLESS STEEL PIPE FLOW CHART

SEAMLESS STEEL PIPE FLOW CHART Seamless steel pipe is a long steel material with hollow section but without joint line. There are two kinds: cold-drawn and hot rolled. It is mostly used in transportation of oil, natural gas, coal gas,

More information

Manufacturer of flat stainless and acid-resistant steel products

Manufacturer of flat stainless and acid-resistant steel products Stainless Service Poland Manufacturer of flat stainless and acid-resistant steel products Facade of ArcelorMittal Service Centre in Siemianowice Śląskie. 01 Stainless Service Poland Our company is a leading

More information

BUMAX product portfolio

BUMAX product portfolio BUMAX product portfolio Bumax BUMAX is a registered trademark and as known as the strongest stainless steel bolt on the market. BUMAX is manufactured in BUFAB:s plants in Sweden and meets the requirements

More information

C27200 CuZn37 Industrial Rolled

C27200 CuZn37 Industrial Rolled C272 Alloy Designation EN DIN CEN/TS 13388 (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order

More information

STAINLESS STEEL BRIGHT BARS

STAINLESS STEEL BRIGHT BARS STAINLESS STEEL BRIGHT BARS Stainless Steel Bright Bars Stainless Steel Bright Bars Viraj is equipped with a state-of-the-art, continuous hardening and tempering furnace for the heat treatment of Ferritic

More information

thermal solutions LOW Finned Tubes

thermal solutions LOW Finned Tubes thermal solutions LOW Finned Tubes GEWA-K, GEWA-KS Low Finned Tubes GEWA-k, GEWA-KS Wieland GEWA-K and GEWA-KS tubes are low finned tubes in copper and copper alloys as well as carbon steel, stainless

More information

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two

More information

STAINLESS STEEL STAINLESS STEEL

STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL The special characteristic of stainless steels is that they have a resistance to corrosion that is significantly higher with respect to other steels; some of them also have an excellent

More information

EHEDG TRIPLE 0,8 Tubes and fittings

EHEDG TRIPLE 0,8 Tubes and fittings EN EHEDG TRIPLE 0,8 Tubes and fittings < 0,8 < 0,8 < 0,8 FOOD-SAFE PRODUCTION M a s t e r i n g P u r i t y Key supplier to the food and pharma industries for more than 140 years INOXCO EHEDG TRIPLE 0.8

More information

HARD CHROME PLATED BARS AND TUBES CROMAX

HARD CHROME PLATED BARS AND TUBES CROMAX HARD CHROME PLATED BARS AND TUBES CROMAX IDEAL FOR HYDRAULICS Cromax bars and tubes from Ovako have become the ideal choice for hydraulic components to a large number of companies worldwide. Ovako s deep

More information

JIS G3463 Stainless Steel for Boiler and Heat Exchanger Tubes

JIS G3463 Stainless Steel for Boiler and Heat Exchanger Tubes JIS G3463 Stainless Steel for Boiler and Heat Exchanger Tubes 1. Scope This Japanese Industrial Standard specifies the stainless steel tubes (hereafter referred to as "tubes") used for exchanging heat

More information

Forta SDX 2507 EN , ASTM UNS S32750

Forta SDX 2507 EN , ASTM UNS S32750 Forta SDX 2507 EN 1.4410, ASTM UNS S32750 General characteristics Forta SDX 2507 is a super duplex product with higher corrosion resistance and mechanical strength than Forta DX 2205. Often used in extremely

More information

Precision Tubes Borusan Mannesmann Call Center.

Precision Tubes Borusan Mannesmann Call Center. Precision Tubes +90 212 393 58 58 Borusan Mannesmann Call Center E-Mail: precision@borusan.com www.borusanmannesmann.com March 16 Contents Milestones Borusan Holding at a Glance Borusan Mannesmann in Brief

More information

PUTTING OUR HEART AND SOUL INTO STEEL

PUTTING OUR HEART AND SOUL INTO STEEL PASSION FOR STEEL PUTTING OUR HEART AND SOUL INTO STEEL How would you define passion? To us, it means the best possible service for you, and the highest level of precision for your product. If service

More information

Bent cold drawn seamless tubes for energy applications U-tubes, S-tubes and free form-tubes

Bent cold drawn seamless tubes for energy applications U-tubes, S-tubes and free form-tubes Bent cold drawn seamless tubes for energy applications U-tubes, S-tubes and free form-tubes SMP International Salzgitter Mannesmann Précision Etirage plant, Vitry Le François, France Salzgitter Mannesmann

More information

UGITECH production plants

UGITECH production plants production plants Bars Avenue Paul Girod 73403 UGINE Cedex Tel. +33 (0)4 79 89 30 30 Fax: +33 (0)4 79 89 34 34 Italia Via G. Di Vittorio, 34/36 20068 PESCHIERA BORROMEO (MI) ITALY Tel. +39 02 54 74 34

More information

ASTM A335 Chrome Moly Pipe. Welcome to Sunny Steel Enterprise Ltd. By Mr. Sum Xu

ASTM A335 Chrome Moly Pipe. Welcome to Sunny Steel Enterprise Ltd. By Mr. Sum Xu ASTM A335 Chrome Moly Pipe By Mr. Sum Xu ASTM A335 Pipe (ASME S/A335, Chrome-Moly) is a seamless ferritic Alloy-Steel Pipe for high temperature service. Welcome to Sunny Steel Enterprise Ltd. Sunny Steel

More information

Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing 1

Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing 1 Designation: A 270 01 An American National Standard Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing 1 This standard is issued under the fixed designation A 270;

More information

STAINLESS STEEL HYGIENIC, DECORATIVE AND EXTREMELY TOUGH

STAINLESS STEEL HYGIENIC, DECORATIVE AND EXTREMELY TOUGH STAINLESS STEEL HYGIENIC, DECORATIVE AND EXTREMELY TOUGH STAINLESS STEEL RUST, ACID AND HEAT-RESISTANT STAINLESS STEEL SHEETS Clients from industry and trade have been using our experience and comprehensive

More information

Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1

Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1 Designation: A 213/A 213M 99a e1 An American National Standard Used in USDOE-NE standards Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger

More information

The Convenience Stores For Metal

The Convenience Stores For Metal STEEL Data and Specifications 303 Chromium-nickel stainless steel with added sulfur or selenium and phosphorus to improve machinability and non-seizing properties. It is the most free machining of the

More information

YOUR SOURCE FOR ALL YOUR PIPE AND TUBING NEEDS

YOUR SOURCE FOR ALL YOUR PIPE AND TUBING NEEDS SINCE 1953 YOUR SOURCE FOR ALL YOUR PIPE AND TUBING NEEDS Eight regional warehouses Over 70,000 tons in inventory ready for immediate delivery Nationwide trucking system Knowledgeable sales staff State-of-the-art

More information

SANICRO 30 TUBE AND PIPE, SEAMLESS

SANICRO 30 TUBE AND PIPE, SEAMLESS SANICRO 30 TUBE AND PIPE, SEAMLESS DATASHEET Sanicro 30 is a low-carbon version of Alloy 800 austenitic nickel-iron-chromium alloy. The grade is used for steam generator tubing in nuclear stations (PWR)

More information

EAM :2003/05 Revision 01 21/10/2016

EAM :2003/05 Revision 01 21/10/2016 European Approval for Materials Data Sheet EAM-0879-03 This data sheet has been raised in accordance with the requirements of Article 15 of the Pressure Equipment Directive 2014/68/EU. The material described

More information

cold drawn bars division March 2017

cold drawn bars division March 2017 cold drawn bars division March 2017 1 Antonio Marcegaglia Chairman Chief Executive Officer Emma Marcegaglia Vice Chairman Chief Executive Officer Marcegaglia Specialties is dedicated to the manufacturing

More information

THERMAL SOLUTIONS MEDIUM-HIGH FINNED TUBES GEWA-D, GEWA-DW, GEWA-DS

THERMAL SOLUTIONS MEDIUM-HIGH FINNED TUBES GEWA-D, GEWA-DW, GEWA-DS THERMAL SOLUTIONS MEDIUM-HIGH FINNED TUBES GEWA-D, GEWA-DW, GEWA-DS MEDIUM-HIGH FINNED TUBES GEWA-D, GEWA-DW, GEWA-DS APPLICATIONS Wieland GEWA-D tubes are medium-high finned tubes in copper and copper

More information

NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE

NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE Pipe Products NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE http://www.nssmc.com/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_02_201708f

More information

VDM Alloy 80 A Nicrofer 7520 Ti

VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.

More information

DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING

DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance

More information

Contents Foreword Scope Normative references Terms and definitions Dimensions and tolerances Designation Technical

Contents Foreword Scope Normative references Terms and definitions Dimensions and tolerances Designation Technical EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM DRAFT pren 10268 November 2002 ICS Will supersede EN 10268:1998 English version Cold rolled flat products with higher yield strength for cold forming

More information

STAINLESS STEELS. Chromium and nickel content in the various groups of stainless steels

STAINLESS STEELS. Chromium and nickel content in the various groups of stainless steels These steels contain a high percentage of chromium and sometimes other alloys and have been designed to prevent different types of corrosion. There are two kinds of corrosion: dry corrosion (often named

More information

2013 version WISCO CHINA

2013 version WISCO CHINA 2013 version WISCO CHINA Hot rolled steel capacity of WISCO Currently, WISCO s capacity of hot rolled products is 13.4 million tons, in which hot rolled commercial products are about 6 million tons per

More information

Relia. Industeel. Relia : Quality Wear Resistant Plates PROPERTIES STANDARDS TECHNICAL CHARACTERISTICS

Relia. Industeel. Relia : Quality Wear Resistant Plates PROPERTIES STANDARDS TECHNICAL CHARACTERISTICS Industeel Relia Relia: Quality Wear Resistant Plates Relia is a range of high hardness, conventional low-alloyed martensitic steels, which obtain their hardness through intense water quenching during plate

More information

30ChGSA Included in 13 standards (CIS Countries)

30ChGSA Included in 13 standards (CIS Countries) Standards GOST 10702-78 GOST 11268-76 GOST 12132-66 GOST 21729-76 GOST 23270-89 GOST 4543-71 GOST 8731-74 GOST 8733-87 GOST R 54159-10 TU 14-1-1213-75 TU 14-1-1409-75 TU 14-1-4118-76 TU 14-4-385-73 Steel

More information

Industeel. Clad plates

Industeel. Clad plates Industeel Clad plates Our Business Industeel Leading special steels producer Industeel is a subsidiary of ArcelorMittal producing special steel hot rolled plates, forged blocks, ingots and formed pieces

More information

EXPERT PIPE SOLUTIONS FOR MECHANICAL ENGINEERING MECHANICAL PIPES

EXPERT PIPE SOLUTIONS FOR MECHANICAL ENGINEERING MECHANICAL PIPES EXPERT PIPE SOLUTIONS FOR MECHANICAL ENGINEERING MECHANICAL PIPES Bringing machines to life Just imagine today s life without energy no lighting, no mechanisms, no electricity Impossible! Energy is a cornerstone

More information

KÖNIG + CO. FORMING KNOW-HOW

KÖNIG + CO. FORMING KNOW-HOW FORMING KNOW-HOW FORMING KNOW-HOW 2 3 FORMING KNOW-HOW 4 Bödenpresswerke. Committed to tradition. Focus on the future. KÖNIG + CO. GmbH is an owner-managed family company with a history of more than eighty

More information

material specifications

material specifications METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile

More information

Controlled document acc. to QR-04; this does not apply to hard copies. Straightness per 1 m length mm]

Controlled document acc. to QR-04; this does not apply to hard copies. Straightness per 1 m length mm] Scope: PLANSEE SE Controlled document acc. to QR-04; this does not apply to hard copies This specification covers Tungsten 1% La 2 O 3 -rods, produced in the diameter range of 0.50-80 mm 1. Dimensions

More information

Stainless steels for mildly corrosive environments

Stainless steels for mildly corrosive environments Stainless steels for mildly corrosive environments Outokumpu Moda range outokumpu.com/moda We believe in a world that lasts forever Outokumpu is a global leader in the advanced materials business, creating

More information

New Frontiers for Hot Finished Hollow Sections. Cologne 30/09/2015

New Frontiers for Hot Finished Hollow Sections. Cologne 30/09/2015 New Frontiers for Hot Finished Hollow Sections Cologne 30/09/2015 Arvedi Group Arvedi Group produces over 3.5 million tpy of steel products, has a turnover of 2.5 Bln and more than 2500 employees. Carbon

More information

Product Range. Seamless Stainless Steel & Nickel-Based Alloy Tubing and Piping

Product Range. Seamless Stainless Steel & Nickel-Based Alloy Tubing and Piping Product Range Seamless Stainless Steel & Nickel-Based Alloy Tubing and Piping Salzgitter Mannesmann Stainless Tubes Typical Application Areas and must be essentially inert to the commonly used fluids transmitted

More information

CONTENTS CORPORATE GUIDING PRINCIPLES CERTIFICATOINS AND LICENCES HOT ROLLED PIPE MANUFACTURING COLD ROLLED PIPE MANUFACTURING TESTING

CONTENTS CORPORATE GUIDING PRINCIPLES CERTIFICATOINS AND LICENCES HOT ROLLED PIPE MANUFACTURING COLD ROLLED PIPE MANUFACTURING TESTING ROHRWERK MAXHÜTTE CONTENTS CORPORATE GUIDING PRINCIPLES p. 4 QUALITY CERTIFICATOINS AND LICENCES p. 5 PRODUCTION PROCESSES HOT ROLLED PIPE MANUFACTURING COLD ROLLED PIPE MANUFACTURING TESTING HEAT TREATMENT

More information

C27000 CuZn36 Industrial Rolled

C27000 CuZn36 Industrial Rolled C27 Alloy Designation EN DIN CEN/TS 13388 (2.335) CW57L JIS C 27 BS CZ 18 UNS Chemical Composition Weight percentage C27 Cu 63.5.. 65.5 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with

More information

we give shape to steel

we give shape to steel Cold-Drawn Bars we give shape to steel Marcegaglia is the leading industrial group worldwide in the steel processing sector, with a yearly output of 5 million tons. After first transformation, within its

More information

HYGIENIC TUBE & PROCESS COMPONENTS FOO D E N A ( D I N R2)

HYGIENIC TUBE & PROCESS COMPONENTS FOO D E N A ( D I N R2) HYGIENIC TUBE & PROCESS COMPONENTS FOO D E N 10357- A ( D I N 11850-R2) Food EN 10357-A (DIN 11850-R2) The norms within the range EN 10357-A are linked to each other. The diameters and wall thickness

More information

WELDING WIRES FOR MAG(CO 2 ) WELDING

WELDING WIRES FOR MAG(CO 2 ) WELDING WELDING WIRES FOR MAG(CO 2 ) WELDING Classification: EN 440 G4Si1 EN1668 WSG2 DIN 8559 SG 2 ASME/AWS/A 5.18 ER70S6 Description and Application: Solid copper coated welding wire for welding in gas shielding

More information

SHORING & UNDERPINNING 02250

SHORING & UNDERPINNING 02250 Subsidiary of Hubbell Power Systems 210 North Allen St. Centralia, MO 65240 Phone: (573) 682-8414 Fax: (573) 682-8660 E-mail: hpscontact@hps.hubbell.com www.abchance.com This MANU-SPEC utilizes the Construction

More information

Sulzer Pumps. Cast Materials. The Heart of Your Process

Sulzer Pumps. Cast Materials. The Heart of Your Process Sulzer Pumps Cast Materials The Heart of Your Process Sulzer Pumps Striving to Serve You Better Sulzer Pumps is a leading global supplier of reliable products and innovative pumping solutions for end users.

More information

VIRGO 17.4 PH: A 17Cr 4Ni 3Cu precipitation hardening martensitic stainless steel

VIRGO 17.4 PH: A 17Cr 4Ni 3Cu precipitation hardening martensitic stainless steel Industeel VIRGO 17.4 PH VIRGO 17.4 PH: A 17Cr 4Ni 3Cu precipitation hardening martensitic stainless steel Alloy VIRGO 17.4 PH is a maraging martensitic stainless steel with Cu and Nb/Cb additions. The

More information

The Convenience Stores For Metal

The Convenience Stores For Metal TOOL STEEL SELECTOR GUIDE Application Suggested Grades Arbors... O1, A2, A6 Battering Tools... S5, S1, S7 Blacksmith Tools... S5, S1 Boiler-Shop Tools... S5, S1, S7 Bolt Clippers... S5, S1 Boring Tools...

More information

Tubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness

Tubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness Tubing Data 1 www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing...

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD - INTERNATIONAL STANDARD ISO 9327-1 First edition 1999-04-15 Steel forgings and rolled or forged bars for pressure purposes Technical delivery conditions Part 1: General requirements Pièces forgées et

More information

we move more than fluids Plate Heat Exchangers Type XPS + safe + smart + efficient LASER WELDED

we move more than fluids Plate Heat Exchangers Type XPS + safe + smart + efficient LASER WELDED we move more than fluids Plate Heat Exchangers safe smart efficient LASER WELDED The XPS for use under hard processing conditions. Our answer to the questions and challenges from the market for heat exchangers

More information

NEOTISS TM HPT finned TubES

NEOTISS TM HPT finned TubES NEOTISS TM HPT finned tubes p.2 / NEOTISS NEOTISS / p.3 Nomenclature Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Type 7 Type 8 Type 9* Material 30 FPI.032 inch.813 mm 28 FPI inch mm 26 FPI inch mm 36 FPI.026

More information

High Performance Stainless Steel Long Products & Production Process of Daido Steel. ISSF-8 Seoul, Korea

High Performance Stainless Steel Long Products & Production Process of Daido Steel. ISSF-8 Seoul, Korea 1 High Performance Stainless Steel Long Products & Production Process of ISSF-8 Seoul, Korea May 17, 2004 Hiroo Inamori Co., Ltd 2 Consumption of Stainless Steel (SS) Long Products Rapid increase of consumption

More information

Standard Specification for Welded Stainless Steel Mechanical Tubing 1

Standard Specification for Welded Stainless Steel Mechanical Tubing 1 Designation: A 554 0 Standard Specification for Welded Stainless Steel Mechanical Tubing This standard is issued under the fixed designation A 554; the number immediately following the designation indicates

More information

PRODUCT: WELDED PIPE SPECIFICATION: 355.6*9.52 MATERIAL: S32205 PRODUCT: SEAMLESS PIPE. SPECIFICATION: Φ33mm*1mm MATERIAL: S31803

PRODUCT: WELDED PIPE SPECIFICATION: 355.6*9.52 MATERIAL: S32205 PRODUCT: SEAMLESS PIPE. SPECIFICATION: Φ33mm*1mm MATERIAL: S31803 Special Piping Materials is renowned for the high volume of Duplex and Super Duplex products that it stocks. It supplies these materials to countless companies around the world who use its product s in

More information

Stainless Steel Tube

Stainless Steel Tube Stainless Steel Tube Stainless Steel Tube Structural Hollow Section Precision Tube Cold Drawn Tube Profile Tube Open Sections Tubes and Profi les for Greenhouses Carpentry Tube Index Gas and General Use

More information

Standard Specification for Welded Stainless Steel Mechanical Tubing 1

Standard Specification for Welded Stainless Steel Mechanical Tubing 1 Designation: A 554 98 e An American National Standard Standard Specification for Welded Stainless Steel Mechanical Tubing This standard is issued under the fixed designation A 554; the number immediately

More information

Product catalogue. Hot-rolled small diameter seamless steel tubes

Product catalogue. Hot-rolled small diameter seamless steel tubes Product catalogue Hot-rolled small diameter seamless steel tubes Product catalogue Our competitive edge: comprehensive offer Alchemia Capital Group has the most wide-ranging offer of seamless steel pipes

More information

CLAD STAINLESS STEELS AND HIGH-NI-ALLOYS FOR WELDED TUBE APPLICATION

CLAD STAINLESS STEELS AND HIGH-NI-ALLOYS FOR WELDED TUBE APPLICATION CLAD STAINLESS STEELS AND HIGHNIALLOYS FOR WELDED TUBE APPLICATION Wolfgang Bretz Wickeder Westfalenstahl GmbH Hauptstrasse 6 D58739 Wickede, Germany Keywords: Cladding, Laser/TIG Welding, Combined SolderingWelding

More information

Material and Process. Specification

Material and Process. Specification s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference

More information

Aluminium Alloy Specification

Aluminium Alloy Specification Casting Overview China supply partners Conventional ELITE Technique Conventional Individual Casting Weight up to 15 Kg 15 Kg 25 Kg Max size range 500mm x 500mm x 500 mm 500mm x 500mm x 500 mm 500mm x 500mm

More information

PANGANG GROUP CHENGDU STEEL & VANADIUM

PANGANG GROUP CHENGDU STEEL & VANADIUM Overview Gen. information Country China Legal name Pangang Group Chengdu Steel & Vanadium Co., Ltd. Previous name Chengdu Seamless Steel Tube Co., Ltd, CSST Employees 18 640 Year of creation 1958 Quality

More information

Content. CP-W and CP-K. Areas of application. Product information for complex-phase steels

Content. CP-W and CP-K. Areas of application. Product information for complex-phase steels Steel CP-W and CP-K Product information for complex-phase steels Issue: January 2017, version 2 Overview of steel grades 50 Hot-rolled flat products Cold-rolled/hot-dip coated flat products Recommended

More information

UDDEHOLM RAMAX LH. Uddeholm Ramax LH is a part of the Uddeholm Stainless Concept.

UDDEHOLM RAMAX LH. Uddeholm Ramax LH is a part of the Uddeholm Stainless Concept. UDDEHOLM RAMAX LH TAKING STANDARDS TO A NEW LEVEL Setting standards is important in the tooling industry. Uddeholm Ramax LH is no exception. It is a first class tool steel for mould bases, with excellent

More information

ALL METALS & FORGE GROUP

ALL METALS & FORGE GROUP ALL METALS & FORGE GROUP All Metals & Forge Group is an ISO9001:2008, AS/EN9100:2009 Rev. C manufacturer of open die forgings and seamless rolled rings, a certification it obtained and has held since 1994.

More information

A Commitment as strong as Steel. Strong Values COMPANY PROFILE THE GROUP

A Commitment as strong as Steel. Strong Values COMPANY PROFILE THE GROUP A Commitment as strong as Steel Strong Values COMPANY PROFILE THE GROUP Reliable Manufacturer of Stainless Steel Long Products Hindustan Inox's Commitment to quality and service has made us grow into a

More information

Subway Cars. Applications Potential

Subway Cars. Applications Potential 301 STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Aircraft Structural Parts Roof Drainage Cooking Utensils Automotive Trim Subway Cars Applications Potential Type 301 is an austenitic chromium-nickel

More information

CHUNG HUNG STEEL CORPORATION. Introduction of. Fine Blanking & Formability Steel HUNG LI STEEL CORPORATION

CHUNG HUNG STEEL CORPORATION. Introduction of. Fine Blanking & Formability Steel HUNG LI STEEL CORPORATION CHUNG HUNG STEEL CORPORATION Introduction of Fine Blanking & Formability Steel HUNG LI STEEL CORPORATION Productive Facilities Continuous pickling line Oiling and inspection of CPL Batch Annealing Furnace

More information

NORRIS. Drive Rods. Engineered performance. Designed tough.

NORRIS. Drive Rods. Engineered performance. Designed tough. NORRIS Drive Rods Engineered performance. Designed tough. 1 (25,4 mm) Norris Drive Rods with 7/8 (22,23 mm) fullsize couplings Tubing size Improvement 27/8 (73,0 mm) 37% improvement in flow area when compared

More information

ENAMELING STEELS PRODUCT DATA BULLETIN

ENAMELING STEELS PRODUCT DATA BULLETIN ENAMELING STEELS PRODUCT DATA BULLETIN Appliances Plumbingware Barbecue Grills Architectural AK Steel manufactures three enameled products to meet a variety of porcelain enameling and formability requirements:

More information

Mission Statement. State Steel strives to provide quality products and services at competitive

Mission Statement. State Steel strives to provide quality products and services at competitive Mission Statement State Steel strives to provide quality products and services at competitive prices. This commitment is demonstrated with several branch locations all offering large, diverse inventories

More information

Drawn Round Steel Bars. Production Units: Malegno (BS), Italy

Drawn Round Steel Bars. Production Units: Malegno (BS), Italy Page 1 of 8 Viale Certosa, 249-20151 Milano Tel: +39 02 30 700 - Fax: +39 02 38000 346 - Mail: commerciale.riva@rivagroup.com Production Units: Malegno (BS), Italy Page 2 of 8 Products STRUCTURAL AND GENERAL

More information

STAINLESS STEEL SHEETS

STAINLESS STEEL SHEETS STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One

More information

STAINLESS STEELS UTILITY FERRITIC. T e c h n i c a l B r o c h u r e. U-3CR12L S U-410S 410S S41008 U-3CR12

STAINLESS STEELS UTILITY FERRITIC. T e c h n i c a l B r o c h u r e.  U-3CR12L S U-410S 410S S41008 U-3CR12 R T e c h n i c a l B r o c h u r e UTILITY FERRITIC STAINLESS STEELS Unity AISI UNS EN U-3CR12 U-3CR12L S43 1.43 U-4S 4S S48 COLUMBUS STAINLESS [Pty] Ltd www.columbusstainless.co.za Introduction 3CR12

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 8535-1 Fourth edition 2006-08-01 Diesel engines Steel tubes for highpressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes Moteurs diesels

More information

RELIABILITY INNOVATION

RELIABILITY INNOVATION Rue de l Industrie ZAC de la Terre Rouge 77220 Tournan-en-Brie FRANCE Tél. + 33 (0)1 64 42 54 00 Fax. +33 (0)1 64 07 03 56 E-mail : info@labbe-france.fr S.A. au capital de 1.000 000 SIREN 746 050 475 000

More information

Group overview. September 2016

Group overview. September 2016 Group overview September 2016 Antonio Marcegaglia Chairman Chief Executive Officer Emma Marcegaglia Vice Chairman Chief Executive Officer Founded in 1959 and fully owned by the Marcegaglia family, the

More information

C Si Mn Cr P S N Nb <0.030 <1.0 < to 18 <0.040 <0.030 < xC to 0.6

C Si Mn Cr P S N Nb <0.030 <1.0 < to 18 <0.040 <0.030 < xC to 0.6 General overview UGIMA 4511 is an improved machinability niobium-stabilised ferritic stainless steel containing between 16 and 17% chromium. Apart from good corrosion resistance, this grade is characterised

More information

Weldable fine-grained structural steel, thermomechanically rolled

Weldable fine-grained structural steel, thermomechanically rolled 460 Weldable fine-grained structural steel, thermomechanically rolled Material data sheet, edition April 2016 1 DI-MC 460 is a thermomechanically rolled, fine-grained structural steel with minimum yield

More information

Bismuth-free Stainless Flux-Cored Wires for High Service Temperatures

Bismuth-free Stainless Flux-Cored Wires for High Service Temperatures Bismuth-free Stainless Flux-Cored Wires for High Service Temperatures voestalpine Böhler Welding www.voestalpine.com/welding Lasting Connections Creating lasting connections is the most important part

More information

VIRGO 15.5 PH: A 15Cr 5Ni 3Cu precipitation hardening martensitic stainless steel

VIRGO 15.5 PH: A 15Cr 5Ni 3Cu precipitation hardening martensitic stainless steel Industeel VIRGO 15.5 PH VIRGO 15.5 PH: A 15Cr 5Ni 3Cu precipitation hardening martensitic stainless steel Alloy VIRGO 15.5 PH is a precipitation hardening martensitic stainless steel with 15% Cr, 5% Ni,

More information

VERIFIED SPECIALISTS IN EXPANSION JOINT APPLICATIONS.

VERIFIED SPECIALISTS IN EXPANSION JOINT APPLICATIONS. VERIFIED SPECIALISTS IN EXPANSION JOINT APPLICATIONS www.megaflexon.com COMPANY HISTORY 1986 Founded. Based in Seoul, Korea manufacturing Spool type rubber expansion joint 1987 Developed metallic expansion

More information

SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE

SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE Technical Literature: ASME SA-516 [ASTM A516] Company Website: www.metalspiping.com SA-516/SA-516M Carbon & Low Alloy Steels From Hebei Metals Industrial Limited SPECIFICATION FOR PRESSURE VESSEL PLATES,

More information

C26800 CuZn33 Industrial Rolled

C26800 CuZn33 Industrial Rolled C268 Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition Weight percentage C268 Cu 66.. 68 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with RoHS 22/96/CE

More information