Tubes and Pipes. Tubes and Pipes D-02

Size: px
Start display at page:

Download "Tubes and Pipes. Tubes and Pipes D-02"

Transcription

1 s and Pipes s and Pipes D-0

2 D-03 s and Pipes Contents s Tubing Selection Tubing Handling Gas Service Tubing Installation Suggested Allowable Working Pressure Tables Stainless Steel Seamless Tubing Carbon Steel Tubing Copper Tubing Suggested Allowable Working Pressure for Additional Alloys Alloy 00 Tubing Alloy C-7 Tubing Alloy 0 Tubing Alloy 00 Tubing Grade Titanium Tubing SAF 07 Super Duplex Tubing Alloy Tubing Alloy Tubing Pressure Ratings at Elevated Temperatures Ordering Information Base Ordering Number Part Number Description Pipes Stainless Steel Seamless Pipe D-0 D-0 D-0 D-0 D-0 D-0 D-09 D- D- D- D- D- D-3 D-3 D- D- D- D- D-7 Tubing Selection s and Pipes D-0 Proper selection, handling, and installation of tubing, when combined with proper selection of FITOK tube fittings, are essential for reliable tubing systems. The following variables should be considered when ordering tubing for use with FITOK tube fittings: Surface finish Material Hardness Wall thickness Surface Finish Surface finish is very important to proper sealing. Tubing with any kind of depression, scratch, raised portion, or other surface defect will be difficult to seal, particularly in gas service. Material Metal tubing material should be softer than fitting material. For example, stainless steel tubing should not be used with brass fittings. When tubing and fittings are made of the same material, tubing must be fully annealed. Hardness FITOK tube fittings are designed to work properly with the tubing that is suggested in the ordering instructions. FITOK stainless steel tube fittings have been repeatedly tested successfully with tubing with hardness up to 00 HV and 90 HRB. Wall Thickness The accompanying tables show working pressure ratings of tubing in a wide range of wall thicknesses. Except as noted, allowable pressure ratings are calculated from S values as specified by ASME B3.3, Process Piping. FITOK tube fittings have been repeatedly tested in both the minimum and maximum wall thicknesses shown. FITOK tube fittings are not recommended for tube wall thicknesses outside the ranges shown in the accompanying tables for each size. Tubing Handling It is important to properly handle the tubing in order to reduce the scratches and protect the surface finish. Tubing should never be dragged out of a tubing rack or across a rough surface. cutters or hacksaws should be sharp. Do not take deep cuts with each turn of the cutter or stroke of the saw. The tubing will go all the way through the ferrules without damaging the ferrule sealing edge.

3 D-0 s and Pipes Gas Service Suggested Allowable Working Pressure for Stainless Steel Tubing s and Pipes D-0 Gases ( air, hydrogen, helium, nitrogen, etc.) have very small molecules that can escape through even the most minute leak path. Some surface defects on the tubing can provide such a leak path. As tube outside diameter () increases, so does the likelihood of a scratch or other surface defect interfering with proper sealing. The most successful connection for gas service will occur if all installation instructions are carefully followed and the heavier wall thicknesses of tubing on the accompanying tables are selected. Tubing Installation Table Fractional Stainless Steel Seamless Tubing Allowable working pressures are calculated from an S value of psi (37. MPa) for ASTM A9 tubing at -0 to 0 F (- to 37 C), as listed in ASME B3.3, except as noted. Multiply stainless steel rating by 9 for working pressure in accordance with ASME B3.. For Welded Tubing For welded and drawn tubing, a derating factor must be applied for weld integrity: For double-welded tubing, multiply working pressure by. For single-welded tubing, multiply working pressure by R L T L Required straight tube T length (see tables) R Radius of tubing bend Tubing properly selected and handled, combined with properly installed FITOK tube fittings, will give you a leaktight system and provide reliable service in a wide variety of applications. For maximum assurance of reliable performance, use: Properly selected and handled high-quality tubing such as provided by FITOK. FITOK tube fittings assembled in accordance with catalog instructions. An appropriate tube support system to limit the movement of tubing and fluid system components. When installing fittings near tube bends, there must be a sufficient straight length of tubing to allow the tube to be bottomed in the FITOK fitting ( see tables ). T / / 3/ / / 7/ Fractional, in. 3/3 3/ 7/ / 3/ / 3/3 3 ➀ Required straight tube length Metric, mm T L➀ L➀ / / 3/ / / 7/ Nominal Wall Thickness, in Note: For gas service, select a tube thickness outside of the shaded area High-quality, fully annealed (Type 30, 30L, 3, 3L) (seamless or welded and drawn) stainless steel hydraulic tubing, ASTM A9 or A3, or equivalent. Hardness not to exceed 90 HRB or 00 HV. Tubing to be free of scratches, suitable for bending and flaring. tolerances not to exceed ± 003 in. for / in. tubing. Note: Certain austenitic stainless tubing has an allowable ovality tolerance double the tolerance and may not fit into FITOK precision tube fittings. Dual-certified grades such as 30/30L and 3/3L meet the minimum chemistry and the mechanical properties of both alloy grades Suggested Allowable Working Pressure Tables Figures and tables are for reference only. No implication is made that these values can be used for design work. Applicable codes and practices in industry should be considered. All pressures are calculated from equations in ASME B3.3, Process Piping. See factors for calculating working pressures in accordance with ASME B3., Power Piping. Calculations are based on maximum and minimum wall thickness, except as noted in individual tables. Example: in. 03 in. wall stainless steel tubing purchased to ASTM A9: Tolerance ± 00 in./ Wall Thickness ± % Calculations are based on 0 in. 03 in. wall thickness tubing. No allowance is made for corrosion or erosion.

4 D-07 s and Pipes Table Metric Stainless Steel Seamless Tubing Allowable working pressures are based on equations from ASME B3.3 for EN ISO 7 tubing (D, T tolerance for 3 to mm; D, T3 tolerance to 0 mm), using a stress value of 37. MPa (0 000 psi) and tensile strength of. MPa (7 900 psi), except as noted. Multiply stainless steel rating by 9 for working pressure in accordance with ASME B Nominal Wall Thickness, mm For Welded Tubing Note: For gas service, select a tube thickness outside of the shaded area For welded and drawn tubing, a derating factor must be applied for weld integrity: For double-welded tubing, multiply working pressure by For single-welded tubing, multiply working pressure by Suggested Allowable Working Pressure for Carbon Steel Tubing Table 3 Fractional Carbon Steel Tubing s and Pipes D-0 Allowable working pressures are calculated from an S value of 700 psi (. MPa) for ASTM A79 tubing at -0 to 0 F (- to 37 C), as listed in ASME B3.3. For working pressure in accordance with ASME B3., multiply by. / 3/ / / 3/ / 7/ Wall Thickness, in High-quality, soft annealed seamless carbon steel hydraulic tubing, ASTM A79 or equivalent. Hardness not to exceed 7 HRB or 30 HV. Tubing to be free of scratches, suitable for bending and flaring. Table Metric Carbon Steel Tubing Allowable working pressures are based on equations from ASME B3.3 for DIN 39 tubing, using a stress value of 3 MPa ( 300 psi) and tensile strength of 30 MPa (9 300 psi). High-quality, fully annealed (Type 30, 30L, 3, 3L) stainless steel tubing, EN ISO 7 or equivalent. Hardness not to exceed 90 HRB or 00 HV. Tubing to be free of scratches, suitable for bending or flaring. tolerances not to exceed ± 07 mm for 3 mm tubing. Note: Dual-certified grades such as 30/30L, 3/3L meet the minimum chemistry and the mechanical properties of both alloy grades Wall Thickness, mm High-quality, soft annealed carbon steel tubing, DIN 39 or equivalent. Hardness not to exceed 7 HRB or 30 HV. Tubing to be free of scratches, suitable for bending or flaring.

5 D-09 s and Pipes Suggested Allowable Working Pressure for Copper Tubing Allowable working pressures are calculated from an S value of 000 psi (.3 MPa) for ASTM B7 (B7M) and ASTM B (BM) tubing at -0 to 0 F (- to 37 C), as listed in ASME B3.3 and ASME B3.. Table Fractional Copper Tubing Suggested Allowable Working Pressure for Additional Alloys s and Pipes D- A limited amount of test data is available on FITOK tube fittings used with special alloy tubing. For sizes not listed in the following tables, we recommend that a sample of the tubing be provided for evaluation before installation. Please include all pertinent information relating to system parameters. Give tubing sample to any of authorized FITOK representatives to forward to the factory. / 3/ / / 7/ / Wall Thickness, in Table Metric Copper Tubing Alloy 00 Tubing Allowable working pressures are calculated from an S value of 700 psi (.9 MPa) for ASTM B tubing at - 0 to 0 F (- to 37 C), as listed in ASME B3.3 and ASME B3.. Table 7 Fractional / / / 3/ Wall Thickness, in Wall Thickness, mm Table Metric 0 Wall Thickness, mm High-quality, soft annealed seamless copper tubing, ASTM B7 (B7M) or equivalent. Also soft annealed (Temper O) copper water tube, type K or type L to ASTM B (type A or type B to ASTM BM). High-quality, fully annealed seamless alloy 00 hydraulic tubing, ASTM B or equivalent. Hardness not to exceed 7 HRB or 37 HV. Tubing to be free of scratches, suitable for bending and flaring. tolerances not to exceed ±00 in ( ±3 mm).

6 D- s and Pipes s and Pipes D- Alloy C-7 Tubing Allowable working pressures are based on equations from ASME B3.3 and ASME B3. for a maximum S value of psi (37. MPa). Alloy 00 Tubing Allowable working pressures are based on equations from ASME B3.3 and ASME B3. for a maximum S value of psi (37. MPa). Table 9 Fractional Table Metric Table 3 Fractional Table Metric / Wall Thickness, in Wall Thickness, mm Wall Thickness, in Wall Thickness, mm High-quality, fully annealed alloy C-7 tubing, ASTM B or equivalent. Hardness not to exceed 0 HRB or HV. Tubing to be free of scratches, suitable for bending and flaring. tolerances not to exceed ±00 in (±3 mm). High-quality, fully annealed, cold drawn # temper alloy 00 seamless alloy tubing, ASTM B7 or equivalent. Hardness not to exceed 9 HRB or 9 HV. Tubing to be free of scratches, suitable for bending and flaring. Order to outside diameter and wall thickness only, not to inside diameter, average wall specification. tolerances not to exceed ±00 in (±3 mm). Alloy 0 Tubing Allowable working pressures are based on equations from ASME B3.3 and ASME B3. for a maximum S value of psi (37. MPa). Grade Titanium Tubing Allowable working pressures are based on equations from ASME B3.3 and a maximum S value of 700 psi (. MPa) for ASTM B33 tubing at -0 to 0 F (- to 37 C). For working pressure in accordance with ASME B3., multiply by. Table Fractional Table Metric Table Fractional Table Metric Wall Thickness, in Wall Thickness, mm Wall Thickness, in Wall Thickness, mm High-quality, fully annealed seamless or welded and drawn alloy 0 tubing, ASTM B79, B or equivalent. Hardness not to exceed 9 HRB. Tubing to be free of scratches, suitable for bending and flaring. tolerances not to exceed ±00 in (±3 mm). High-quality, fully annealed seamless or welded and drawn grade titanium tubing, ASTM B33 or equivalent. Tubing to be free of scratches, suitable for bending. tolerances not to exceed ±00 in (±3 mm).

7 D-3 s and Pipes Table 7 Fractional SAF 07 Super Duplex Tubing Allowable working pressures are calculated from an S value of psi (. MPa) for ASTM A79 tubing at -0 to 0 F (- to 37 C), as listed in ASME B3.3. / Wall Thickness, in High-quality, fully annealed SAF 07 super duplex tubing, ASTM A79 or equivalent. Hardness not to exceed 3 HRC. 00 Tubing to be free of scratches, suitable for bending and flaring. 000 Alloy Tubing Allowable working pressures are calculated from an S value of 700 psi (. MPa) for ASTM B Grade tubing at -0 to 0 F (- to 37 C), tubing outside diameter and wall thickness tolerances from ASTM B for small-diameter tube. Table 0 Fractional Wall Thickness, in Table Metric Wall Thickness, mm s and Pipes D-.. High-quality, fully annealed seamless alloy tubing, ASTM B, Grade or, or equivalent. Hardness not to exceed HRC or HV. Tubing to be free of scratches, suitable for bending and flaring Alloy Tubing Allowable working pressures are calculated from an S value of psi (. MPa) for ASTM B3 and ASTM B3 seamless tubing at -0 to 0 F (- to 37 C), For ASTM B70, Class or equivalent welded and drawn tubing, multiply working pressure by. Pressure Ratings at Elevated Temperatures Table Elevated Temperature Factors Table Fractional Wall Thickness, in Table 9 Metric Wall Thickness, mm Temperature F C Copper Carbon Ti Steel ➀ 30/ Alloy Alloy Alloy Alloy 30L ➁ 3/ 3L ➁ 00 0 ➂ C-7➂ 00➂ Tubing Materials ➀ ➀ Based on 37 F (90 C) max. ➁ Dual-certified grades such as 30/30L and 3/3L meet the minimum chemistry and the mechanical properties of both alloy grades. ➂ Based on the lower derating factor for stainless steel, in accordance with ASME B SAF 07 Alloy Alloy High-quality, fully annealed seamless alloy tubing, ASTM B3, ASTM B3, or equivalent. Fully annealed welded alloy tubing, ASTM B70, class or equivalent. Hardness not to exceed HRT90 or 0 HV. Tubing to be free of scratches, suitable for bending and flaring. Wall thickness tolerances not to exceed ±%. To determine allowable working pressure at elevated temperatures, multiply allowable working pressures from Tables through by a factor shown in Table. Example: Type 3 stainless steel in. 03 in. wall at 00 F. The allowable working pressure at - 0 to 0 F (- to 37 C) is 00 psig ( Table, page D-0 ).. The elevated temperature factor for 00 F (37 C) is 7 ( Table, above): 00 psig 7 = 97 psig The allowable working pressure for 3 SS in. 03 in. wall tubing at 00 F ( 37 C ) is 97 psig.

8 D- s and Pipes s and Pipes D- Ordering Information Base Ordering Number Fractional Stainless Steel Tubing Metric Stainless Steel Tubing Wall Thickness Wall Thickness 3 Basic Ordering Number Weight lb/ft Weight.0..0 Weight unit conversion: lb/ft=. Kg/m Kg/m=7 lb/ft 3L SS-ST-03- SS-ST-09- SS-ST-09- SS-ST-0- SS-ST-09- SS-ST-0- SS-ST-0- SS-ST-03- SS-ST-3-.0 SS-STM-.0- L-STM-.0- S-STM-.0- L-STM SS-STM-.0- L-STM-.0- S-STM-.0- L-STM-.0-7 SS-STM-.0- SS-STM-.-. SS-STM-.- L-STM-.- S-STM-.- L-STM SS-STM-.- L-STM-.- S-STM-.- L-STM SS-ST30M-3.0- L-ST30M-3.0- S-ST30M-3.0- L-ST30M SS-STM-.0- L-STM-.0- S-STM-.0- L-STM SS-STM-.- L-STM-.- S-STM-.- L-STM SS-STM-.0- L-STM-.0- S-STM-.0- L-STM SS-STM-.- L-STM-.- S-STM-.- L-STM-.-.0 SS-STM-.0- L-STM-.0- S-STM-.0- L-STM SS-STM-.- L-STM-.- S-STM-.- L-STM SS-STM-.0- L-STM-.0- S-STM-.0- L-STM SS-ST0M-.0- L-ST0M-.0- S-ST0M-.0- L-ST0M SS-STM-.- L-STM-.- S-STM-.- L-STM SS-ST3M-3.- L-ST3M-3.- S-ST3M-3.- L-ST3M L-ST-03- L-ST-09- L-ST-09- L-ST-0- L-ST-09- L-ST-0- L-ST-0- L-ST-03- L-ST-3-3L L-STM-.0- L-STM-.- Basic Ordering Number Kg/m S-STM-.0- S-STM-.- 30L SS-ST3M-.0- L-ST3M-.0- S-ST3M-.0- L-ST3M S-ST-03- S-ST-09- S-ST-09- S-ST-0- S-ST-09- S-ST-0- S-ST-0- S-ST-03- S-ST-3- L-ST-03- L-ST-09- L-ST-09- L-ST-0- L-ST-09- L-ST-0- L-ST-0- L-ST-03- L-ST-3-3L L-STM-.0- L-STM-.- Part Number Description SS - ST MP - A9 Material Type Wall Thickness Length Surface Condition Standard ASTM A79 A79 Annealed and Pickled AP Fractional Metric Fractional Metric Metric Fractional ST Seamless Tubing SS 3 ASTM A9 A9 Mechanically Polished foot M 0 mm 0 0" mm mm M /" L 3L MP ASTM A79 A f ee t M 00 mm 03 03".0.0 mm 3 mm 3M /" S 30 ASTM B7 B7 BA Bright Annealed f ee t M 00 mm 09 09".. mm M mm 3/" 3 L 30L ASTM B B 0 0 f ee t 3M 3000 mm 0 0".. mm mm M " CS Carbon Steel ASTM B B M 000 mm 0 f ee t Coil 0C 03 03".. mm mm M /" CU Copper ASTM B79 B mm Coil 0MC 09 09".0.0 mm mm M " M Alloy 00 ASTM B7 B7 0 f ee t Coil 0C 9 9".. mm M mm " Alloy C-7 HC ASTM B33 B mm Coil 0MC 0 0".. mm mm M /" Alloy 0 A0 INC Alloy 00 " M mm 3 3".. mm B3 ASTM B3 TI Titanium Grade 7/" M mm " mm B ASTM B D7 Duplex 07 " 0M 0 mm " mm A Alloy 0 " M mm.0.0 mm A Alloy " M mm.. mm mm M 30 mm 30M Refer to Table to for tubing wall thickness. Standard materials of coil tubing: SS, L, S, L, CS, CU; Coil Tubing : Up to ", mm; For coil tubing of other materials, or length, : 3 mm 3M : 3 mm 3M please contact FITOK company or authorized agents. Note: "Part Number Description" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK company or authorized agents.

9 D-7 s and Pipes s and Pipes D- Stainless Steel Seamless Pipe Features Nominal pipe sizes from NPS / to NPS. Material, size, specification and heat code are indicated on the pipe surface. Allowable Working Pressure The allowable working pressures in the form are based on ASME B3.3 at ambient temperature. The data in the form are applied to 3 SS, 30 SS and 3 SS. For 3L SS and 30L SS, multiply the data in the form by to get the allowable working pressure. The elevated temperature factors are the same as those of FITOK stainless steel seamless tubing. Material Standard Grade UNS Designation ASTM ASME 3/3L 30/30L 3 S30/S33 S300/S303 S30 A3 SA3 Ordering Information NPS / Schedule Number 0S 0S 0S 0S 0S 0S 0S 0S 0S Weight unit conversion: lb/ft=. Kg/m Basic Ordering Number 3 3L 30 30L 3 SS-SP-- SS-SP-0S- SS-SP-- SS-SP-0S- SS-SP-- SS-SP-0S- SS-SP-- SS-SP-0S- SS-SP-- SS-SP-0S- SS-SP-- SS-SP-0S- SS-SP0-- SS-SP0-0S- SS-SP-- SS-SP-0S- SS-SP3-- SS-SP3-0S- L-SP-- L-SP-0S- L-SP-- L-SP-0S- L-SP-- L-SP-0S- L-SP-- L-SP-0S- L-SP-- L-SP-0S- L-SP-- L-SP-0S- L-SP0-- L-SP0-0S- L-SP-- L-SP-0S- L-SP3-- L-SP3-0S- S-SP-- S-SP-0S- S-SP-- S-SP-0S- S-SP-- S-SP-0S- S-SP-- S-SP-0S- S-SP-- S-SP-0S- S-SP-- S-SP-0S- S-SP0-- S-SP0-0S- S-SP-- S-SP-0S- S-SP3-- S-SP3-0S- L-SP-- L-SP-0S- L-SP-- L-SP-0S- L-SP-- L-SP-0S- L-SP-- L-SP-0S- L-SP-- L-SP-0S- L-SP-- L-SP-0S- L-SP0-- L-SP0-0S- L-SP-- L-SP-0S- L-SP3-- L-SP3-0S- S-SP-- S-SP-0S- S-SP-- S-SP-0S- S-SP-- S-SP-0S- S-SP-- S-SP-0S- S-SP-- S-SP-0S- S-SP-- S-SP-0S- S-SP0-- S-SP0-0S- S-SP-- S-SP-0S- S-SP3-- S-SP3-0S- Weight lb/ft NPS / Schedule Number (ASME B3.9M) S S 0S (bar) / 390 (7) 70 (397) 700 (00) / 390 (73) 0 (37) 30 (0) / 3 () 0 (33) 0 (9) 70 (70) 30 () 370 (30) 90 (7) 90 (3) 0 (7) 30 () 00 (3) 0 (7) 0 () 3330 (9) 0 (30) 30 () () 70 (90) 390 () 70 (7) 30 () 0 (70) 30 (3) 0 () 30 (99) 00 () 990 (0) Part Number Description Material SS 3 L 3L S 30 SP Type Seamless Pipe Nominal Size NPS / SS - SP A3 NPS / NPS Schedule Number S Schedule S S Schedule S Schedule Length feet feet 0 0 feet A3 Standard ASTM A3 L 30L NPS / 0S Schedule 0S S 3 NPS 0 3 NPS NPS NPS NPS Note: "Part Number Description" is used for composition rules of FITOK product model, Not suitable for specific product part number selection, not random combinations. If in doubt, please contact FITOK company or authorized agents.

10 D-9 s and Pipes Pipe Dimension Schedule Number S STD 0 0S 0 XS XXS S Outside Diameter mm / Nominal Wall Thickness, mm in The schedule numbers of S, S,, and 0S comply with ASME B3.9M.. The others comply with ASME B3.M. NPS

Tubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness

Tubing Data. Contents. Tubing Selection. Tubing Handling. Tubing Material. Tubing Outside Diameter Hardness. Tubing Wall Thickness Tubing Data 1 www.swagelok.com Tubing Data Contents Tubing Selection... 1 Tubing Handling.... 1 Gas Service... 2 Tubing Installation.... 2 Suggested Allowable Working Pressure Tables Carbon Steel Tubing...

More information

Gyrolok. Gyrolok Flareless Tube Fittings Tubing Data Charts

Gyrolok. Gyrolok Flareless Tube Fittings Tubing Data Charts Gyrolok Flareless Tube Fittings Tubing Data Charts Design HOKE Gyrolok Flareless Tube Fittings have been carefully designed and manufactured to provide a wide range of outstanding leak-tight application

More information

gyrolok Flareless Tube Fittings Tubing Data Charts Index

gyrolok Flareless Tube Fittings Tubing Data Charts Index Flareless Tube Fittings Data Charts Index Safety Warning Inside Front Cover Calculating Yield, Burst, and Maximum Allowable Working Pressures 2 Maximum Allowable Stress Values for Material at Various Temperatures

More information

ASTM A335 Chrome Moly Pipe. Welcome to Sunny Steel Enterprise Ltd. By Mr. Sum Xu

ASTM A335 Chrome Moly Pipe. Welcome to Sunny Steel Enterprise Ltd. By Mr. Sum Xu ASTM A335 Chrome Moly Pipe By Mr. Sum Xu ASTM A335 Pipe (ASME S/A335, Chrome-Moly) is a seamless ferritic Alloy-Steel Pipe for high temperature service. Welcome to Sunny Steel Enterprise Ltd. Sunny Steel

More information

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25

J.I.C. HYDRAULIC TUBING Seamless & Welded Hydraulic Fluid Line 23 Seamless Burst Pressures & Working Pressures 24 Welded Burst Pressures 25 TABLE OF CONTENTS STEEL & ALLOY ROUND MECHANICAL TUBING Drawn Over Mandrel (DOM) 3-15 Cold Drawn Seamless (CDS) 3-15 Hot Rolled Seamless (HRS) 3-15 Electric Resistance Welded (ERW) 3-15 Seamless 4130/4140

More information

STAINLESS STEEL SHEETS

STAINLESS STEEL SHEETS STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One

More information

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service 1

Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service 1 Designation: A 269 04 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service 1 This standard is issued under the fixed designation A 269; the number immediately

More information

thermal solutions LOW Finned Tubes

thermal solutions LOW Finned Tubes thermal solutions LOW Finned Tubes GEWA-K, GEWA-KS Low Finned Tubes GEWA-k, GEWA-KS Wieland GEWA-K and GEWA-KS tubes are low finned tubes in copper and copper alloys as well as carbon steel, stainless

More information

Balancing High Strength Tubing Selection and Cost in Hydraulic System Design IFPE 2014

Balancing High Strength Tubing Selection and Cost in Hydraulic System Design IFPE 2014 Balancing High Strength Tubing Selection and Cost in Hydraulic System Design IFPE 2014 Objectives Review the development of High Strength Steels and how that relates to hydraulic tubing development Explore

More information

Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1

Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes 1 Designation: A 213/A 213M 99a e1 An American National Standard Used in USDOE-NE standards Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger

More information

2,500 63,5 63,5 2,756 70,0 70,0 2 1/2 2,875 73,03 76, ,1 2,0 2,375 60,33 60, ,3 3,0 3,500 88,90 88, ,9

2,500 63,5 63,5 2,756 70,0 70,0 2 1/2 2,875 73,03 76, ,1 2,0 2,375 60,33 60, ,3 3,0 3,500 88,90 88, ,9 «" I, l fl ( f9) ( Gh fl IE]. / -- PED 97 /23/EC Certified Co.,\. Cl 1509001. ISO l I.OHSAS 18001,\. = ' = " &lltollndil P '.td lb."1t - (SHAii SlREMAl YANNA)IJAlN ENTERPRISES) WALL THIKNESS OUTSIDE DIAMETER

More information

SEAMLESS STEEL PIPE FLOW CHART

SEAMLESS STEEL PIPE FLOW CHART Seamless steel pipe is a long steel material with hollow section but without joint line. There are two kinds: cold-drawn and hot rolled. It is mostly used in transportation of oil, natural gas, coal gas,

More information

Single-Jacketed Tubing

Single-Jacketed Tubing Single-Jacketed Tubing COILED STICK CUT TO LENGTH UTC Single Jacketed tube Protect the tube against corrosion and pitting in a diverse changing environment and climates. The phenomenon of Chloride Stress

More information

NEOTISS TM HPT finned TubES

NEOTISS TM HPT finned TubES NEOTISS TM HPT finned tubes p.2 / NEOTISS NEOTISS / p.3 Nomenclature Type 1 Type 2 Type 3 Type 4 Type 5 Type 6 Type 7 Type 8 Type 9* Material 30 FPI.032 inch.813 mm 28 FPI inch mm 26 FPI inch mm 36 FPI.026

More information

Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube 1

Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube 1 Designation: B 65 05 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube This standard is issued under the fixed designation B 65; the number immediately following the designation

More information

Corporation SEAMLESS PIPE

Corporation SEAMLESS PIPE Corporation SEAMLESS PIPE Pipe Applicable Standards ASTM Pipe Code Designations A 106/A 106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service A 312/A 312M Standard Specification

More information

PRODUCT CATALOG. TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. amerpipe.com

PRODUCT CATALOG. TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. amerpipe.com PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 825 Maryville

More information

marcegaglia RU Vladimir

marcegaglia RU Vladimir marcegaglia RU Vladimir Marcegaglia RU 70 000 sqm total area 14 000 sqm first phase covered area Vladimir St. Petersburg Moscow 42 000 sqm for development (covered) 25 000 t/y tube manufacturing capacity

More information

Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing 1

Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing 1 Designation: A 270 01 An American National Standard Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing 1 This standard is issued under the fixed designation A 270;

More information

The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs.

The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs. The following tubing can be supplied from stock, on futures or on a periodic release program which we can design to fit your needs. I. Seamless Copper and Brass Tubing - as per ASTM and military standards,

More information

Jiangyin Donghao Stainless Steel Pipe Co., Ltd

Jiangyin Donghao Stainless Steel Pipe Co., Ltd Jiangyin Donghao Stainless Steel Pipe Co., Ltd March 12 th, 2018 Edition ISO 9001-2008, PED97/23/EC and ASME Boiler and Pressure Vessel Code Certificate certified. Built in 2005, Cover area over 30,000

More information

Marcegaglia USA Munhall

Marcegaglia USA Munhall Marcegaglia USA Munhall 1 Marcegaglia USA The Marcegaglia USA production facility is located in Munhall, PA (just outside Pittsburgh). It is devoted to the manufacturing of stainless steel, duplex and

More information

A106 Gr.B Pipes & Tubes

A106 Gr.B Pipes & Tubes ------------------------------------------------------------------------------ A106 Gr.B Pipes & Tubes Web: www.victorsteel.net ------------------------------------------------------------------------------

More information

Marcegaglia do Brasil

Marcegaglia do Brasil Garuva plant Marcegaglia do Brasil 7 millions wire on tube condensers 240 millions meters of welded tubes for refrigeration 180.000 tons of electro-welded carbon tubes Brasília 20.000 tons of stainless

More information

Our philosophy at your service

Our philosophy at your service CPC Inox is a leader in stainless steel since 1976 Our philosophy at your service Three production sites in Italy, sales branches in France (CPC Inox France) and Germany (CPC Inox Deutschland): CPC Inox

More information

PRECISION PERFORMANCE DELIVERED SANDVIK HIGH-PRECISION TUBING SOLUTIONS FOR SUPERIOR PERFORMANCE

PRECISION PERFORMANCE DELIVERED SANDVIK HIGH-PRECISION TUBING SOLUTIONS FOR SUPERIOR PERFORMANCE PRECISION PERFORMANCE DELIVERED SANDVIK HIGH-PRECISION TUBING SOLUTIONS FOR SUPERIOR PERFORMANCE WE KEEP ON GOING WHERE OTHERS STOP Nothing about your business is standard. Whether you re in the aerospace

More information

Copper and Copper Alloy Tube, Pipe and Fittings COPPER and COPPER ALLOY TUBE and PIPE Seamless Copper Pipe: Copper pipe is almost pure copper manufactured to the requirements of ASTM B 42 - Standard Specification

More information

C27200 CuZn37 Industrial Rolled

C27200 CuZn37 Industrial Rolled C272 Alloy Designation EN DIN CEN/TS 13388 (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order

More information

SANICRO 30 TUBE AND PIPE, SEAMLESS

SANICRO 30 TUBE AND PIPE, SEAMLESS SANICRO 30 TUBE AND PIPE, SEAMLESS DATASHEET Sanicro 30 is a low-carbon version of Alloy 800 austenitic nickel-iron-chromium alloy. The grade is used for steam generator tubing in nuclear stations (PWR)

More information

DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING

DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance

More information

Forta SDX 2507 EN , ASTM UNS S32750

Forta SDX 2507 EN , ASTM UNS S32750 Forta SDX 2507 EN 1.4410, ASTM UNS S32750 General characteristics Forta SDX 2507 is a super duplex product with higher corrosion resistance and mechanical strength than Forta DX 2205. Often used in extremely

More information

Ultrahigh-Purity (UHP) and High-Purity Stainless Steel Tubing

Ultrahigh-Purity (UHP) and High-Purity Stainless Steel Tubing Ultrahigh-Purity (UHP) and High-Purity Stainless Steel Tubing Fractional, Metric, and 1 www.swagelok.com Ultrahigh-Purity (UHP) and High-Purity Stainless Steel Tubing Fractional, Metric, and 316L stainless

More information

AL 29-4C AL 29-4C. Technical Data Sheet. Stainless Steel: Superferritic INTRODUCTION (UNS S44735)

AL 29-4C AL 29-4C. Technical Data Sheet. Stainless Steel: Superferritic INTRODUCTION (UNS S44735) AL 29-4C Stainless Steel: Superferritic (UNS S44735) INTRODUCTION AL 29-4C alloy, is a superferritic stainless steel developed by ATI in the early 1980s specifically for power plant surface condenser tubing.

More information

A Commitment as strong as Steel. Strong Values COMPANY PROFILE THE GROUP

A Commitment as strong as Steel. Strong Values COMPANY PROFILE THE GROUP A Commitment as strong as Steel Strong Values COMPANY PROFILE THE GROUP Reliable Manufacturer of Stainless Steel Long Products Hindustan Inox's Commitment to quality and service has made us grow into a

More information

Copper Tube - ASTM B88

Copper Tube - ASTM B88 Copper Tube - ASTM B88 QUALITY, Reliability, Range and performance C o p p e r t u b e > P L U M B I N G > G A S F I T T I N G > D R A I N A G E copper tube is manufactured to the ASTM B88 standard using

More information

Plymouth Feedwater Heater Tubing F O R T H E P O W E R G E N E R AT I O N I N D U S T R Y

Plymouth Feedwater Heater Tubing F O R T H E P O W E R G E N E R AT I O N I N D U S T R Y Plymouth Feedwater Heater Tubing F O R T H E P O W E R G E N E R AT I O N I N D U S T R Y P L Y M O U T H F E E D W A T E R H E A T E R T U B I N G THE CHOICE OF UTILITY ENGINEERS AND FABRICATORS Products

More information

RELIABLE PIPES & TUBES LTD.

RELIABLE PIPES & TUBES LTD. RELIABLE PIPES & TUBES LTD. OHSAS 800:2007 CERTIFIED ISO 900:2008 CERTIFIED ISO 400:2004 CERTIFIED PED CERT NO 0 202 IND/Q--00 GOVT. RECOGNIZED EXPORT HOUSE Manufacturer & Exporters of Monel, Inconel,

More information

316Ti Stainless Steel, UNS S31635

316Ti Stainless Steel, UNS S31635 316Ti Stainless Steel, UNS S31635 Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated ASTM A240 316Ti Alloy Description Type 316Ti is a titanium stabilized variation of alloy 316. This austenitic

More information

ASME B31.3 Process Piping. 19. What s Different in B31.1

ASME B31.3 Process Piping. 19. What s Different in B31.1 ASME B31.3 Process Piping Charles Becht IV, PhD, PE Don Frikken, PE Instructors BECHT ENGINEERING COMPANY, INC. What s Different in B31.1-1 19. What s Different in B31.1 Scope Organization of the Code

More information

PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings.

PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings. Stainless, DUPLEX, Super Duplex flanges and fittings PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings. introduction Our inventory consists

More information

THERMAL SOLUTIONS MEDIUM-HIGH FINNED TUBES GEWA-D, GEWA-DW, GEWA-DS

THERMAL SOLUTIONS MEDIUM-HIGH FINNED TUBES GEWA-D, GEWA-DW, GEWA-DS THERMAL SOLUTIONS MEDIUM-HIGH FINNED TUBES GEWA-D, GEWA-DW, GEWA-DS MEDIUM-HIGH FINNED TUBES GEWA-D, GEWA-DW, GEWA-DS APPLICATIONS Wieland GEWA-D tubes are medium-high finned tubes in copper and copper

More information

Standard Specification for Stainless Steel Wire 1

Standard Specification for Stainless Steel Wire 1 Designation: A 580/A 580M 06 Standard Specification for Stainless Steel Wire 1 This standard is issued under the fixed designation A 580/A 580M; the number immediately following the designation indicates

More information

DONGWOO E&C Tube & Pipe Division

DONGWOO E&C Tube & Pipe Division Tube & Pipe Division we are ready to be a new global market leader. Cu-Ni / Brass / Al-Brass / Copper Head Office : #284-17 Jinjang-dong, Buk-gu, Ulsan, Korea (683-350) TEL : +82-52-288-1862 FAX : +82-52-288-1863

More information

STOCKIST SUPPLIERS & EXPORTERS:

STOCKIST SUPPLIERS & EXPORTERS: PIPES & TUBES: Stainless Steel: ASTM A 312, A 213, A 213, A 249, A 269, A 358, A 240, A 276 Type: 202, 304, 304L, 304, 304H, 316, 316L, 316Ti, 321, 321H, 317, 317L, 310, 310S, 409, 410, 420, 430 etc. Carbon

More information

Standard Specification for Seamless Brass Tube [Metric] 1

Standard Specification for Seamless Brass Tube [Metric] 1 Designation: B 135M 00 e1 METRI Standard Specification for Seamless Brass Tube [Metric] 1 This standard is issued under the fixed designation B 135M; the number immediately following the designation indicates

More information

INTERNATIONAL STANDARD NACE MR0175/ISO :2003 TECHNICAL CORRIGENDUM 2 TECHNICAL CORRIGENDUM 2

INTERNATIONAL STANDARD NACE MR0175/ISO :2003 TECHNICAL CORRIGENDUM 2 TECHNICAL CORRIGENDUM 2 INTERNATIONAL STANDARD NACE MR0175/ISO 15156-3:2003 TECHNICAL CORRIGENDUM 2 Published 2005-09-01 INTERNATIONAL ORGANIZATION FOR STANDARDIZATION МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ ORGANISATION

More information

PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGINGS

PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGINGS p 1 of 6 UF-1 UF-12 PART UF REQUIREMENTS FOR PRESSURE VESSELS FABRICATED BY FORGING the test temperature be higher than 20 F ( 29 C). Certification is required. An ultrasonic examination shall be made

More information

TMK HYDRA ART INSIDE SKIVED AND ROLLER BURNISHED COLD FINISHED SEAMLESS STEEL TUBES and PISTON RODS TUBES FOR HYDRAULIC CYLINDERS

TMK HYDRA ART INSIDE SKIVED AND ROLLER BURNISHED COLD FINISHED SEAMLESS STEEL TUBES and PISTON RODS TUBES FOR HYDRAULIC CYLINDERS TMK HYDRA ART INSIDE SKIVED AND ROLLER BURNISHED COLD FINISHED SEAMLESS STEEL TUBES and PISTON RODS TUBES FOR HYDRAULIC CYLINDERS TMK is one of the world s leading producers of tubular products for the

More information

Connection and Joining Technologies for Sandvik SAF 2507 High Performance, Small-Bore Fluid Systems:

Connection and Joining Technologies for Sandvik SAF 2507 High Performance, Small-Bore Fluid Systems: Connection and Joining Technologies for Sandvik SAF 2507 High Performance, Small-Bore Fluid Systems: SAF 2507 Alloy Properties and Benefits New Swagelok Tube Fittings for SAF 2507 Alloy New Swagelok Weld

More information

STANDARD FERRITIC STAINLESS STEELS

STANDARD FERRITIC STAINLESS STEELS T e c h n i c a l B r o c h u r e STANDARD FERRITIC STAINLESS STEELS Unity AISI UNS EN U-40910 409 S40910 1.4512 U-430 430 S43000 1.4016 U-430DDQ 430 S43000 1.4016 U-439 439 S43035 1.4510 - S43940 U-1.4509

More information

Company profile. Company details

Company profile. Company details Company profile Tectubi Raccordi formed a newco with OMP Mongiardino in November 2009, named OMP Mongiardino-Tectubi Raccordi Bending Division. Founded in 1968, OMP Mongiardino was the first Italian company

More information

Product Range. Seamless Stainless Steel & Nickel-Based Alloy Tubing and Piping

Product Range. Seamless Stainless Steel & Nickel-Based Alloy Tubing and Piping Product Range Seamless Stainless Steel & Nickel-Based Alloy Tubing and Piping Salzgitter Mannesmann Stainless Tubes Typical Application Areas and must be essentially inert to the commonly used fluids transmitted

More information

Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service 1

Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service 1 Designation: A 333/A 333M 04a Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service This standard is issued under the fixed designation A 333/A 333M; the number immediately

More information

VDM Alloy 80 A Nicrofer 7520 Ti

VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.

More information

Ugitech Stainless steel solutions for the oil and gas industry

Ugitech Stainless steel solutions for the oil and gas industry Ugitech Stainless steel solutions for the oil and gas industry 02 Stainless steel solutions for the oil and gas industry Ugitech and the Oil and Gas industry The world s conventional oil reserves are seriously

More information

ATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)

ATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825) ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper

More information

C27000 CuZn36 Industrial Rolled

C27000 CuZn36 Industrial Rolled C27 Alloy Designation EN DIN CEN/TS 13388 (2.335) CW57L JIS C 27 BS CZ 18 UNS Chemical Composition Weight percentage C27 Cu 63.5.. 65.5 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with

More information

RR-F-191/3D 14 May SUPERCEDING RR-F-191/3C July 22, 1981 FEDERAL SPECIFICATION SHEET

RR-F-191/3D 14 May SUPERCEDING RR-F-191/3C July 22, 1981 FEDERAL SPECIFICATION SHEET 14 May 1990 ----------- SUPERCEDING RR-F-191/3C July 22, 1981 FEDERAL SPECIFICATION SHEET FENCING, WIRE AND POST, METAL (CHAIN-LINK FENCE POSTS, TOP RAILS AND BRACES) (DETAIL SPECIFICATION) This Federal

More information

A Guideline for Designing ASME B31 Pressure Piping Using Lokring Fittings with Elastic Strain Preload (ESP ) Technology

A Guideline for Designing ASME B31 Pressure Piping Using Lokring Fittings with Elastic Strain Preload (ESP ) Technology 38376 Apollo Parkway Willoughby, OH 44094 USA TECHNOLOGY LLC A Guideline for Designing ASME B31 Pressure Piping Using Lokring Fittings with Elastic Strain Preload (ESP ) Technology For Lokring Product

More information

STAINLESS STEEL STAINLESS STEEL

STAINLESS STEEL STAINLESS STEEL STAINLESS STEEL The special characteristic of stainless steels is that they have a resistance to corrosion that is significantly higher with respect to other steels; some of them also have an excellent

More information

Chrome Moly flanges and fittings

Chrome Moly flanges and fittings Chrome Moly flanges and fittings PRO Alloy is Europe s leading stockholder for Stainless, Duplex, Super Duplex, Chrome Moly flanges and fittings. introduction Our inventory consists of a complete range

More information

1. Always looking to the future. 2. Commitment to quality and excelence in service. 3. Experience and development. 4. The value of our team: the

1. Always looking to the future. 2. Commitment to quality and excelence in service. 3. Experience and development. 4. The value of our team: the 1. Always looking to the future. 2. Commitment to quality and excelence in service. 3. Experience and development. 4. The value of our team: the people. 5. Technological vanguard for the industry. 6. Measurement

More information

Steel Pipe and Tube. Section 13

Steel Pipe and Tube. Section 13 Steel Pipe and Tube Section 13 13-1 INFORMATION - STEEL PIPE AND TUBE GENERAL INFORMATION Rigid hydraulic tubing offers intrinsic bene ts when installing uid transfer lines in both xed and mobile plant

More information

C26800 CuZn33 Industrial Rolled

C26800 CuZn33 Industrial Rolled C268 Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition Weight percentage C268 Cu 66.. 68 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with RoHS 22/96/CE

More information

Pipe Sizes - ANSI/ASME

Pipe Sizes - ANSI/ASME Sizes - ANSI/ASME This subsection summarises pipe dimensions and weights (per unit length) as defined in ANSI/ASME Specifications B36.19M-1985. (Reaffirmed 1994.) This applies The quoted weights are calculated

More information

STOCK LIST COQUITLAM, BC, CANADA SHEET PLATE COIL PIPE TUBE ROD BAR FITTINGS FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL

STOCK LIST COQUITLAM, BC, CANADA SHEET PLATE COIL PIPE TUBE ROD BAR FITTINGS FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STOCK LIST SHEET PLATE COIL PIPE TUBE ROD BAR FLANGES EXTRUSIONS ALUMINUM BRASS BRONZE COPPER COPPER-NICKEL STAINLESS STEEL COQUITLAM, BC, CANADA S T AINLESS STEEL ALLOYS 303, 304, 304L, 316, 316L, 317L,

More information

HOW INNOVATION TAKES FORM

HOW INNOVATION TAKES FORM HOW INNOVATION TAKES FORM COLD FORMED ERW Open Sections Custom Shapes Informative Brochure 4 Steel Pipes 8 Steel Profiles 10 Steel Grades Water and Gas Pipes, Industrial Pipes, Drilling Pipes, Exhaust

More information

Regulating valves REG 6-65, REG-SS 15-40

Regulating valves REG 6-65, REG-SS 15-40 MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG 6-65, REG-SS 15-40 REG are angle-way and straight-way regulating valves, which act as normal stop valves in closed position. The valves

More information

JIS G3463 Stainless Steel for Boiler and Heat Exchanger Tubes

JIS G3463 Stainless Steel for Boiler and Heat Exchanger Tubes JIS G3463 Stainless Steel for Boiler and Heat Exchanger Tubes 1. Scope This Japanese Industrial Standard specifies the stainless steel tubes (hereafter referred to as "tubes") used for exchanging heat

More information

A Comparison: ASME B31.1 Power Piping versus ASME B31.3 Process Piping

A Comparison: ASME B31.1 Power Piping versus ASME B31.3 Process Piping A Comparison: ASME B31.1 Power Piping versus ASME B31.3 Process Piping Don Frikken, PE BECHT ENGINEERING COMPANY, INC. 1 Topics Discussed B31 History Scopes Organization of the Codes Bases for Allowable

More information

KÖNIG + CO. FORMING KNOW-HOW

KÖNIG + CO. FORMING KNOW-HOW FORMING KNOW-HOW FORMING KNOW-HOW 2 3 FORMING KNOW-HOW 4 Bödenpresswerke. Committed to tradition. Focus on the future. KÖNIG + CO. GmbH is an owner-managed family company with a history of more than eighty

More information

Thickness (T) 0,07 to 3/8 (1,78 to 9,52 mm) 1 3T 4T 2 4T 5T 3 4T 5T 4 5T 6T 5 9T 10T 7 4T 5T 11 3T 4T 12 4T 5T 16 4T 5T 17 3T 4T

Thickness (T) 0,07 to 3/8 (1,78 to 9,52 mm) 1 3T 4T 2 4T 5T 3 4T 5T 4 5T 6T 5 9T 10T 7 4T 5T 11 3T 4T 12 4T 5T 16 4T 5T 17 3T 4T TITANIUM FORMING Forming Titanium is readily formed at room temperature, using techniques and equipment suitable for steel. When correct parameters have been established, tolerances similar to those attainable

More information

C51100 CuSn4 Industrial Rolled

C51100 CuSn4 Industrial Rolled Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW45K JIS C 5111 BS PB 11 UNS Chemical Composition Weight percentage Cu C511 Rest Sn 3.5 4.5 % P.3.35 % This alloy is in accordance with RoHS

More information

Alloy C194 vs. Alloy C122 for Air Conditioning and Refrigeration Applications

Alloy C194 vs. Alloy C122 for Air Conditioning and Refrigeration Applications Fineweld Tube TECHNICAL LETTER Alloy C194 vs. Alloy C122 for Air Conditioning and Refrigeration Applications Connection tube is an important element in a refrigeration/air conditioning system transmitting

More information

GREEN THREAD Piping Systems

GREEN THREAD Piping Systems Bulletin No. A1300 February 15, 2006 SMITH FIBERCAST GREEN THREAD Piping Systems PRODUCT GREEN THREAD pipe is filament wound using an amine cured epoxy resin and fiberglass and has a resin-rich liner reinforced

More information

FPD190 Differential pressure restriction orifice plates

FPD190 Differential pressure restriction orifice plates Data sheet DS/FPD190 EN FPD190 Differential pressure restriction orifice plates Limits the flowrate or reduces the pressure of liquids, gases and steam Measurement made easy Orifice plate for flow restriction

More information

SECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM

SECTION LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM Page 1 of 6 SECTION 08 32 20 LAGUNA SERIES TOP HUNG SLIDING DOOR SYSTEM USE THIS SECTION WHEN SPECIFYING OVERHEAD SUPPORTED GLASS SLIDING DOORS. SECTION INCLUDES OVERHEAD SLIDING TUBE ASSEMBLY, MOUNTING

More information

6.1 General. This chapter shall provide requirements for correct use of sprinkler system components and hardware.

6.1 General. This chapter shall provide requirements for correct use of sprinkler system components and hardware. NFPA 13-Proposed 2013 Edition Standard for the Installation of Sprinkler Systems TIA Log No.: 1054 Reference: Chapter 6 Comment Closing Date: June 1, 2012 Submitter: Bob Caputo, Fire & Life Safety America

More information

Pre-Insulated Tubing Bundles

Pre-Insulated Tubing Bundles www.swagelok.com Pre-Insulated Tubing undles Electric-Traced and Steam-Traced Features Simplified field installation 1/8 to 3/4 in. and 6 to 12 mm seamless or welded tubing sizes 316 / 316L stainless steel,

More information

Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate 1

Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate 1 Enclosed is a computer file in PDF format containing one or more ASTM Standards. The documents contained in this e-mail are complimentary, prepublication copies of the final edited documents. These documents

More information

1. Cast-in-place concrete is specified in Section

1. Cast-in-place concrete is specified in Section SECTION 03 38 00 PART 1 - GENERAL 1.01 DESCRIPTION A. This Section describes the requirements for furnishing and installing post-tensioned slabs, jacks, jacking and anchors at Parking Structure, and record

More information

AEROSPACE MATERIAL SPECIFICATION

AEROSPACE MATERIAL SPECIFICATION AEROSPACE MATERIAL SPECIFICATION AMS 5643Q Issued OCT 1951 Revised JAN 2003 Superseding AMS 5643P Steel, Corrosion-Resistant, Bars, Wire, Forgings, Tubing, and Rings 16Cr - 4.0Ni - 0.30Cb - 4.0Cu Solution

More information

NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE

NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE Pipe Products NIPPON STEEL & SUMITOMO METAL SEAMLESS STEEL LINE PIPE http://www.nssmc.com/ 2-6-1 Marunouchi, Chiyoda-ku,Tokyo 100-8071 Japan Tel: +81-3-6867-4111 SEAMLESS STEEL LINE PIPE P103en_02_201708f

More information

Product catalogue. Hot-rolled small diameter seamless steel tubes

Product catalogue. Hot-rolled small diameter seamless steel tubes Product catalogue Hot-rolled small diameter seamless steel tubes Product catalogue Our competitive edge: comprehensive offer Alchemia Capital Group has the most wide-ranging offer of seamless steel pipes

More information

Titanium Production Tubing for HPHT Oil & Gas Wells. Jonathan Parry Chevron Jim Grauman TIMET

Titanium Production Tubing for HPHT Oil & Gas Wells. Jonathan Parry Chevron Jim Grauman TIMET Titanium Production Tubing for HPHT Oil & Gas Wells Jonathan Parry Chevron Jim Grauman TIMET Overview Titanium alloy seamless pipe manufacturing & application Titanium advantages over high chrome/nickel

More information

INTRODUCTION TO WELDED METAL

INTRODUCTION TO WELDED METAL INTRODUCTION TO WELDED METAL BELLOWS SEALS 1 Welded metal bellows mechanical seals have earned their place in today s fluid sealing marketplace because of their reliability and wide range of uses. Bellows

More information

THE PREFERRED SOURCE FOR STAINLESS STEEL TUBULAR PRODUCTS

THE PREFERRED SOURCE FOR STAINLESS STEEL TUBULAR PRODUCTS THE PREFERRED SOURCE FOR STAINLESS STEEL TUBULAR PRODUCTS SEATTLE HOUSTON BATON ROUGE ATLANTA Toll Free: 800.426.4258 Fax: 206.878.2475 sales@pacstainless.com Toll Free: 800.535.0386 Fax: 713.466.6334

More information

For more information call (800) Materials Services Copper and Brass Sales. Stainless Steel

For more information call (800) Materials Services Copper and Brass Sales. Stainless Steel For more information call (800) 926-2600 1 Materials Services Copper and Brass Sales Stainless Steel Service You Can Count On. At thyssenkrupp Materials NA, Copper and Brass Sales, we're committed to being

More information

UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments.

UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments. Industeel URANUS 2202 The alternative to 304L UR 2202 is a low nickel, low molybdenum stainless steel designed to match the corrosion resistance of 304L in most environments. Its higher strength allows

More information

SPCIFICATION FOR STANDARD SIZS N 15 : 2 + A1 : 27 FOR BLACK AND HOT DIPPD GALVANIZD STL PIPS Tube T Y P - L T Y P - L1 T Y Size OD (Specified) Wall Thickness (mm) Weight of Tube (Kg./Mtr) Pressure Inch

More information

Product Range & Specifications PIPES

Product Range & Specifications PIPES Product Range & Specifications PIPES All rights reserved. Any unauthorized reproductions, exhibition, distribution or communication of this material can result in severe criminal and civil penalties. Dimensions

More information

BIS or used as Amendment to STANDARD comments is 15 Nov. 2008

BIS or used as Amendment to STANDARD comments is 15 Nov. 2008 Doc: MTD 4 (4730) For comments only BUREAU OF INDIAN STANDARDS Modified draft Indian Standard HOT ROLLED CARBON STEEL SHEET AND STRIP (Sixth Revision of IS 1079) ICS 77.140.50 Not to be reproduced without

More information

Seamless tube. Sandvik SAF S-1874-ENG May 2000 Cancels all previous editions

Seamless tube. Sandvik SAF S-1874-ENG May 2000 Cancels all previous editions Seamless tube Sandvik S-1874-ENG May 2 Cancels all previous editions Sandvik is a duplex stainless steel (austenitic-ferritic). It is characterised by: high resistance to stress corrosion cracking in chloride-bearing

More information

material specifications

material specifications METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile

More information

&If STEEL TUBES INDIA. Introduction. (( mh{ mil \.. m). / PED 97/23/EC Certified Co.

&If STEEL TUBES INDIA. Introduction.  (( mh{ mil \.. m). / PED 97/23/EC Certified Co. Introduction Tube Seamless to ASTM A269, imperial sizes from 1 /8 O/D x 24swg to 4 O/D x 1 /4 wall in grade 316L Seamless to ASTM A269, grades 304L & 316L, in metric sizes 6mm O/D x 0.5mm wall to 38mm

More information

30ChGSA Included in 13 standards (CIS Countries)

30ChGSA Included in 13 standards (CIS Countries) Standards GOST 10702-78 GOST 11268-76 GOST 12132-66 GOST 21729-76 GOST 23270-89 GOST 4543-71 GOST 8731-74 GOST 8733-87 GOST R 54159-10 TU 14-1-1213-75 TU 14-1-1409-75 TU 14-1-4118-76 TU 14-4-385-73 Steel

More information

Precision feeler gage, calibrated shim steel and Specialty Spring Steels

Precision feeler gage, calibrated shim steel and Specialty Spring Steels Precision feeler gage, calibrated shim steel and Specialty Spring Steels 2011 Your partner for precision steels We offer an extensive range of precision feeler gages and shim steel which covers most product

More information

Process Product Specification MMA Ultramet 347H AWS E TIG/SAW ER347H AWS ER347 FCW Supercore 347HP AWS E347T1-1/4

Process Product Specification MMA Ultramet 347H AWS E TIG/SAW ER347H AWS ER347 FCW Supercore 347HP AWS E347T1-1/4 DATA SHEET C-11 347H STAINLESS STEEL METRODE PRODUCTS LTD HANWORTH LANE, CHERTSEY SURREY, KT16 9LL Tel: +44(0)1932 566721 Fax: +44(0)1932 565168 Sales Fax: +44(0)1932 569449 Technical Fax: +44(0)1932 566199

More information

AISI A2 Cold work tool steel

AISI A2 Cold work tool steel T OOL STEEL FACTS AISI A2 Cold work tool steel Great Tooling Starts Here! General AISI A2 is an air- or oil hardening chromiummolybdenum-vanadium alloyed tool steel characterized by: Good machinability

More information

SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE

SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE Technical Literature: ASME SA-516 [ASTM A516] Company Website: www.metalspiping.com SA-516/SA-516M Carbon & Low Alloy Steels From Hebei Metals Industrial Limited SPECIFICATION FOR PRESSURE VESSEL PLATES,

More information