A visiting research scholar who is majored in material mechanics, characterization
|
|
- Neal Stewart
- 5 years ago
- Views:
Transcription
1 Curriculum Vitae Guozheng Quan School of Material Science and Engineering, Chongqing University Chongqing , P. R. China Tel: (86) (office) Fax: (8623) Mobile: (86) Personal Born July 07, 1980 in Nanyang, Henan, China. Married with Ms. Ying Tong. Profile A visiting research scholar who is majored in material mechanics, characterization and processing Engaged in the research of the state of stress workability and intrinsic workability for magnesium alloy, heat-resistant alloy and duralumin alloy, and even the relative flexible forming processes involving electric upsetting and spinning for the obove-mentioned hardworking materials. Rich experience in modeling of the plastic flowing behavior, microstructure evolution and even multi-field and multi-scale simulation of plastic forming processes. Computer Skills: Windows; Office; Table-curve; Origin; AutoCAD; UG; Abaqus; Marc; Deform. Education ~ Ph.D. in Material Processing Engineering. Chongqing University, Chongqing, P. R. China 1
2 2002.9~ M.A. in Material Processing Engineering. Chongqing University, Chongqing, P. R. China ~ B.S. in Material Processing Engineering. Chongqing University, Chongqing, P. R. China Work experience ~2013.7, I did a part-time job as a Research and Development Engineer of Chongqing Jiepin Lt.d ~2006.9, I went into the workforce as a teaching assistant of Chongqing University, P. R. China ~2008.9, I achieved the qualification of university lecturer of Chongqing University, P. R. China ~present, I achieved the qualification of associate professor and master's supervisor of Chongqing University, P. R. China ~ , I completed the post-doctoral research program in Department of Solid Mechanics, Chongqing University, Chongqing, P. R. China ~2011.4, I completed the post-doctoral research program in Department of Aerospace Engineering, Pusan National University, Pusan, South Korea ~2015.8, I am doing the visiting scholar research program in the Laboratory of Micromechanics of Materials, Georgia Institute of Technology, Atlanta, GA, USA. Publication Record [1] Guo-Zheng Quan, Xuan Wang, Yong-le Li, Le Zhang. Analytical descriptions of dynamic softening mechanisms for Ti-13Nb-13Zr biomedical alloy in single phase and two phase regions [J]. Archives of Metallurgy and Materials. (SCI) (IF:0.96) (In press) [2] Quan Guo-zheng*, Zhi-hua Zhang, Xuan Wang, Yong-le Li, An Mao, Yu-feng Xia. Parameter optimization of cooling system in U-shape hot stamping mold for high strength steel sheet based on MOPSO [J]. International Journal of Advanced Manufacturing Technology, 90(1): , (SCI) (IF: 1.568). [3] Quan Guo-zheng*, Tong Wang, Le Zhang. Research on the Influence of Hot Stamping Process Parameters on Phase Field Evolution by Thermal-mechanical-phase Coupling Finite Element [J]. International Journal of 2
3 Advanced Manufacturing Technology, 89(1): , (SCI) (IF: 1.568). [4] Guo-Zheng Quan, Zhi-hua Zhang, Tong Wang, Yu-feng Xia. Numerical description of hot flow behaviors at Ti-6Al-2Zr-1Mo-1V alloy by GA-SVR and relative applications [J]. Materials Research-Ibero-American Journal of Materials, 19(6): , (SCI) (IF:0.483) [5] Guo-zheng Quan, Yong-le Li, Le Zhang, Xuan Wang. Evolution of grain refinement degree induced by dynamic recrystallization for Nimonic 80A during hot compression process and its FEM analysis [J]. Vacuum, 139: 51-63, (SCI) (IF:1.56) [6] Quan Guo-zheng*, Zong-yang Zhan, Tong Wang, Yu-feng Xia. Modeling the hot tensile flow behaviors at ultra-high-strength steel and construction of three-dimensional continuous interaction space for forming parameters [J]. High Temperature Materials and Processes, 36(1): 29-43, (SCI: EH7PP) (IF:0.356) [7] Quan Guo-zheng*, Zhen-yu Zou, Tong Wang, Bo Liu, Jun-chao Li. Modelling of the hot flow behaviors for as-extruded 7075 alloy by ANN and its application [J]. High Temperature Materials and Processes, 36(1): 1-13, (SCI: EH7PP) (IF:0.356) [8] Guo-Zheng Quan, Le Zhang, Xuan Wang, Yong-le Li. Correspondence between microstructural evolution mechanisms and hot processing parameters for Ti-13Nb-13Zr biomedical alloy in comprehensive processing maps [J]. Journal of Alloys and Compounds, 698: , (SCI) (IF:3.03) [9] Guo-zheng Quan*, Jia Pan, Xuan Wang, Le Zhang, Tong Wang. Correspondence between grain refinements and flow softening behaviors at Nimonic 80A superalloy under different strain rates, temperatures and strains [J]. Materials Science and Engineering: A, 679: , (SCI:ED7XW) (IF:2.409) [10] Guo-zheng Quan*, Zhi-Hua Zhang, Le Zhang, Qing Liu. Numerical Descriptions of Hot Flow Behaviors across β Transus for as-forged Ti 10V 2Fe 3Al Alloy by LHS-SVR and GA-SVR and Improvement in Forming Simulation Accuracy [J]. Applied Sciences-basel, 6(8): 1-23, (SCI: DZ0HC) ( IF:1.484) [11] Quan Guo-zheng*, Zhen-yu Zou, Zhi-hua Zhang, Jia Pan. A study on formation process of secondary upsetting defect in electric upsetting and optimization of processing parameters based on multi-field coupling FEM [J]. Materials Research-Ibero-American Journal of Materials, 19(4): , (SCI: DV8JZ) (IF:0.483) [12] Quan Guozheng*, Zong-yang Zhan, Le Zhang, Dong-sen Wu, Gui-chang Luo, Yu-feng Xia. A study on the multi-phase transformation kinetics of ultra-high-strength steel and application in thermal-mechanical-phase coupling simulation of hot stamping process. Materials Science and Engineering: A, 673: 24-38, (SCI: DU7QP) ( IF:2.409) [13] Quan Guo-zheng*, Zhen-yu Zou, Dong-sen Wu, Jian-ting Liang, Jie Zhou and Qing Liu. Prediction of Ductile Fracture Initiation for Ti-10V-2Fe-3Al Alloy by Compressions at Different Temperatures and Strain Rates [J]. Materials at High Temperatures, 33 (1): 6-14, (SCI: DJ9PL) (IF:0.837) [14] Guo-zheng Quan*, Jia Pan, Xuan Wang. Prediction the hot compressive deformation behavior for superalloy Nimonic 80A by BP-ANN model [J]. Applied Sciences-basel, 6 3
4 (3): 1-16, (SCI: DI5HY) (IF:1.484) [15] Guo-Zheng Quan*, Jia Pan, Zhi-hua Zhang. Phase transformation and recrystallization evolution in space-time domain during isothermal compressions for Ti-6Al-4V by Multi-field and Multi-scale Coupling FE analysis [J]. Materials & Design, 94: , (SCI: DD0CZ) (IF:3.501) [16] Quan Guo-zheng*, Tong Wang, Zong-yang Zhan, Yu-feng Xia. Artificial Neural Network Modeling to Evaluate the Dynamic Flow Stress of 7050 Aluminum Alloy [J]. Journal of Materials Engineering and Performance, 25 (2): , (SCI: DG8CA) (IF:0.998) [17] Quan Guo-zheng*, Hai-rong Wen, Jia Pan, Zhen-yu Zou, Shi-ao Pu. Construction of Processing Maps based on Expanded Data by BP-ANN and Identification of Optimal Deforming Parameters for Ti-6Al-4V Alloy [J]. International Journal of Precision Engineering and Manufacturing, 17 (2): 1-10, (SCI: DC9UU) (IF:1.5) [18] Quan Guo-zheng*, Zhi-hua Zhang, Jia Pan, Yu-feng Xia. Modelling the hot flow behaviors of AZ80 alloy by BP-ANN and the applications in accuracy improvement of computations [J]. Materials Research-Ibero-American Journal of Materials, 18(6): , (SCI: CZ5OA) (IF:0.483) [19] Quan Guo-zheng*, Hai-rong Wen, Shi-ao Pu, Zheng-yu Zou, Dong-sen Wu. Identification of stable processing parameters in Ti-6Al-4V alloy from a wide temperature range across β transus and a large strain rate range [J]. High Temperature Materials and Processes, 34(7): , (SCI: CW2HU) (IF:0.356) [20] Quan Guo-zheng*, Jin Liu, An Mao,Bo Liu, Jin-sheng Zhang. A characterization for the hot flow behaviors of as-extruded 7050 aluminum Alloy [J]. High Temperature Materials and Processes, 34(7): , (SCI: CW2HU) (IF:0.356) [21] Quan Guo-zheng*, An Mao, Zhen-yu Zou, Gui-chang Luo, Jian-ting Liang. Description of grain refinement by dynamic recrystallization under hot compressions for as-extruded 3Cr20Ni10W2 heat-resistant alloy [J]. High Temperature Materials and Processes, 34(7): , (SCI: CW2HU) (IF:0.356) [22] Quan Guo-zheng*, Zhen-yu Zou, Hai-rong Wen, Shi-ao Pu, Wen-quan Lv. A characterization of hot flow behaviors involving different softening mechanisms by ANN for as-forged Ti-10V-2Fe-3Al alloy [J]. High Temperature Materials and Processes, 34(7): , (SCI: CW2HU) (IF:0.356) [23] Quan Guo-zheng*, Shi-ao Pu, Zheng-yu Zou, Hai-rong Wen, Jie Zhou. Quantitative Analysis of Dynamic Softening Behaviors Induced by Dynamic Recrystallization for Ti-10V-2Fe-2Al Alloy [J]. High Temperature Materials and Processes, 34(6): , (SCI:CS0MK) (IF:0.356) [24] Quan Guo-zheng*, Shi-ao Pu, Zhen-yu Zou, Ying-ying Liu and Yu-feng Xia. Modelling of the hot flow behaviors for Ti-13Nb-13Zr alloy by BP-ANN model and its application [J]. International Journal of Precision Engineering and Manufacturing, 16(10): , (SCI:CQ4JL) (IF:1.5) [25] Quan Guo-zheng*, Dong-sen Wu, Yan-dong Zhang, Yu-feng Xia, Jie Zhou. Constitutive modeling for tensile behaviors of Ultra-high-strength-steel BR1500HS at 4
5 different temperatures and strain rates [J]. High Temperature Materials and Processes, 34(5): , (SCI:CN3LK) (SCI) (IF:0.356) [26] Quan Guo-zheng*, Gui-Chang Luo, Hai-Rong Wen. Influence of Electric Upsetting Process Variables on Temperature Field Evolution by Multi-field Coupling Finite Element Analysis [J]. International Journal of Precision Engineering and Manufacturing, 16(7): , (SCI:CK9LT) (IF:1.5) [27] Quan Guo-zheng*, Wen-Quan Lv, Jian-Ting Liang, Shi-Ao Pu, Gui-Chang Luo, Qing Liu. Evaluation of the hot workability corresponding to complex deformation mechanism evolution for Ti-10V-2Fe-3Al alloy in a wide condition range [J]. Journal of Materials Processing Technology, 221: 66-79, (SCI:CG1BJ) (IF:2.041) [28] Quan Guo-zheng*, Gui-chang Luo, Jian-ting Liang, Dong-sen Wu, An Mao, Qing Liu. Modelling for the dynamic recrystallization evolution of Ti-6Al-4V alloy in two-phase temperature range and a wide strain rate range [J]. Computational Materials Science, 97(1): , (SCI:AU3JF) (IF:1.879) [29] Quan Guo-zheng*, Jian-ting Liang, Wen-quan Lv, Dong-sen Wu, Ying-ying Liu, Gui-chang Luo, Jie Zhou. A characterization for the constitutive relationships of 42CrMo high strength steel by artificial neural network and its application in isothermal deformation [J]. Materials Research-Ibero-American Journal of Materials, 17(5): , (SCI: AW9IF) (IF:0.483) [30] Guo-Zheng Quan*, Gui-chang Luo, An Mao, Jian-ting Liang, and Dong-sen Wu. Evaluation of Varying Ductile Fracture Criteria for 42CrMo Steel by Compressions at Different Temperatures and Strain Rates [J]. The Scientific World Journal, 2014, 2014(doi: /2014/579328): (SCI:AA1WW) (IF:1.219) [31] Quan Guo-zheng*, Yuan-ping Mao, Chun-tang Yu, Wen-quan Lv, Zhou Jie. The flow behavior modeling of as-extruded 3Cr20Ni10W2 austenitic heat-resistant alloy at elevated temperatures considering the effect of strain. Materials Research-Ibero-American Journal of Materials, 17(2): , (SCI:AH6QO) (IF:0.483) [32] Guo-Zheng Quan*, Chun-tang Yu, Ying-ying Liu, Yu-feng Xia. A comparative study on improved Arrhenius-type and artificial neural network models to predict high-temperature flow behaviors in 20MnNiMo alloy [J]. The Scientific World Journal, 2014, 2014(doi: /2014/108492): (SCI:AB4LP) (IF:1.219) [33] Quan Guozheng*, Dong-sen Wu, Gui-chang Luo, Yu-feng Xia, Jie Zhou, Qing Liu, Lin Gao. Dynamic recrystallization kinetics in α phase of as-cast Ti-6Al-2Zr-1Mo-1V alloy during compression at different temperatures and strain rates. Materials Science and Engineering: A, 589(1): 23-33, (SCI:273FX) ( IF:2.409) [34] Guo-Zheng Quan*, An Mao, Gui-chang Luo, Jian-ting Liang, Dong-sen Wu, Jie Zhou. Constitutive modeling for the dynamic recrystallization kinetics of as-extruded 3Cr20Ni10W2 heat-resistant alloy based on stress-strain data. Materials & Design, 52(12): , (SCI:210KR) (IF:3.171) [35] Guo-Zheng Quan*, Jian-ting Liang, Ying-ying Liu, Gui-chang Luo, Yu shi, Jie Zhou. Identification of optimal deforming parameters from a large range of strain, strain rate 5
6 and temperature for 3Cr20Ni10W2 heat-resistant alloy. Materials & Design, 52(12): , (SCI:210KR) (IF: 3.171) [36] Guo-Zheng Quan*, Wen-quan Lv, Yuan-ping Mao, Yan-wei Zhang, Jie Zhou. Prediction of flow stress in a wide temperature range involving phase transformation for as-cast Ti-6Al-2Zr-1Mo-1V alloy by artificial neural network. Materials & Design, 50(4): 56-61, (SCI:167EZ) (IF:3.171) [37] Quan Guo-zheng*, Gui-sheng Li, Yang Wang, Chun-tang Yu, Zhou Jie. A characterization for the flow behavior of as-extruded 7075 aluminum alloy by the improved Arrhenius model with variable parameters. Materials Research-Ibero-American Journal of Materials, 16(1): 19-27, (SCI:087VC) (IF:0.483) [38] Quan Guo-zheng*, Yu Shi, Chun-tang Yu, Zhou Jie. The improved Arrhenius model with variable parameters of flow behavior characterizing for the as-cast AZ80 magnesium alloy. Materials Research-Ibero-American Journal of Materials, 16(4): 66-75, (SCI:195TX) (IF:0.483) [39] Quan Guo-zheng*, Feng-biao Wang, Ying-ying Liu, Yu Shi, Jie Zhou. Evaluation of varying ductile fracture criterion for 7075 aluminum alloy. Transactions of Nonferrous Metals Society of China, 23(3): , (SCI:212SM) (IF:1.001) [40] Quan Guozheng*, Yang Wang, Chun-tang Yu, Zhou Jie. Hot workability characteristics of as-cast titanium alloy Ti 6Al 2Zr 1Mo 1V: A study using processing map. Materials Science and Engineering: A, 564(1): 46-56, (SCI:101AR) (IF:2.409) [41] Quan Guo-zheng*, Yang Wang, Ying-ying Liu, Zhou Jie. Effect of temperatures and strain rates on the average size of grains refined by dynamic recrystallization for as-extruded 42CrMo steel. Materials Research-Ibero-American Journal of Materials, 16(5): , (SCI:239WA) (IF:0.483) [42] Guo-Zheng Quan*, Yuan-ping Mao, Gui-sheng Li, Wen-quan Lv, Yang Wang, Jie Zhou. A characterization for the dynamic recrystallization kinetics of as-extruded 7075 aluminum alloy based on true stress-strain curves. Computational Materials Science, 55(1): 65-72, (SCI:898GS) (IF:1.879) [43] Lv Wen-quan, Quan Guo-zheng*, Yu Chun-tang, Zhou Jie. Effect of strain, strain rate and temperature on workability of AZ80 wrought magnesium alloy. Transactions of Nonferrous Metals Society of China, 22(s3): , (SCI:175GF) (IF:1.001) [44] Guo-zheng Quan*, Lei Zhao, Tao Chen, Yang Wang, Yuan-ping Mao, Wen-quan Lv, Jie Zhou. Identification for the optimal working parameters of as-extruded 42CrMo high-strength steel from a large range of strain, strain rate and temperature. Materials Science and Engineering: A, 538(1-2): , (SCI:913TV) (IF:2.409) [45] Guo-Zheng Quan*, Tae-Wan Ku, Woo-Jin Song, Beom-Soo Kang. The workability evaluation of wrought AZ80 magnesium alloy in hot compression. Materials & Design, 32(4): , (SCI:725KE) (IF:3.171) [46] Guo-Zheng Quan*, Tae-Wan Ku, Beom-Soo Kang. Improvement of Formability for Multi-point Bending Process of AZ31B Sheet Material Using Elastic Cushion. 6
7 International Journal of Precision Engineering and Manufacturing, 12(6): , (SCI:855QR) (IF:1.5) [47] Guo-Zheng Quan*, Yu Shi, Yi-Xin Wang, Beom-Soo Kang, Tae-Wan Ku, Woo-Jin Song. Constitutive modeling for the dynamic recrystallization evolution of AZ80 magnesium alloy based on stress strain data. Materials Science and Engineering: A, 528(28): , (SCI:829DE) (IF:2.409) [48] Quan Guozheng*, Li Guisheng, Chen Tao, Wang Yixin, Zhang Yanwei, Zhou Jie. Dynamic recrystallization kinetics of 42CrMo steel during compression at different temperatures and strain rates. Materials Science and Engineering: A, 528(13-14): , (SCI:756IF) (IF:2.409) [49] Quan Guo-zheng*, Tong Ying, Luo Gang, Zhou Jie. A characterization for the flow behavior of 42CrMo steel. Computational Materials Science, 50(1): , (SCI:680QY) (IF:1.879) [50] Guo-Zheng Quan*, Beom-Soo Kang, Tae-Wan Ku, Woo-Jin Song. Identification for the optimal working parameters of Al-Zn-Mg-Cu alloy with the processing maps based on DMM. International Journal of Advanced Manufacturing Technology, 56(9-12): , (SCI:817OQ) (IF:1.205) [51] Quan Guo-zheng*, Tong Ying, Zhou Jie. Dynamic softening behaviour of AZ80 magnesium alloy during upsetting at different temperatures and strain rates. Proceedings of the Institution of Mechanical Engineers. Part B-Journal of Engineering Manufacture, 24(11): , (SCI:684TU) (IF:0.77) [52] Quan Guo-zheng*, Song Tao, Zhou Yi-jun. Relationship between mechanical properties and grain size of AZ80 at 350 under different strain rates. Transactions of Nonferrous Metals Society of China, 20(s2): , (SCI:638DW) (IF:1.001) [53] Quan Guo-zheng*, Liu Ke-wei, Zhou Jie. Dynamic softening behaviors of 7075 aluminum alloy. Transactions of Nonferrous Metals Society of China, 19(s3): , (SCI:529FL) (IF:1.001) [54] Quan Guo-zheng*, Zhou Jie, Wang Meng-han, Quan Guo-hui, Tong Ying. Deforming mechanism of non-mandrel drawing process of circular aluminum tube by simulation. Transactions of Nonferrous Metals Society of China, l6(s3): , (SCI:140RP) (IF:1.001) 7
No. Name College Major Email 1 Ke Yang Chuan College of Science Chemistry key@cup.edu.cn 2 Wang Li Qun College of Science Mathematics wliqunhmily@gmail.com 3 Xu Tao College of Science Mathematics xutao@cup.edu.cn
More informationWind Energy And Wind Power Technology (2) By ZHANG ZHI YING?ZHAO PING?LI YIN FENG DENG
Wind Energy And Wind Power Technology (2) By ZHANG ZHI YING?ZHAO PING?LI YIN FENG DENG If you are searched for the ebook Wind energy and wind power technology (2) by ZHANG ZHI YING?ZHAO PING?LI YIN FENG
More informationWind Energy And Wind Power Technology (2) By ZHANG ZHI YING?ZHAO PING?LI YIN FENG DENG
Wind Energy And Wind Power Technology (2) By ZHANG ZHI YING?ZHAO PING?LI YIN FENG DENG Chinese Physics Letters, Volume 26, Number 1, - Number 1, January 2009 Zhou Xu-Rong, Zhang Xiao-Min, Yu Tong-Jun,
More informationEffect of Al5Ti1B master alloy on microstructures and properties of AZ61 alloys
Effect of Al5Ti1B master alloy on microstructures and properties of AZ61 alloys MA Xu-liang( ) 1, 2, WANG Xiang( ) 2, LI Xin-lin( ) 2, YANG Lei( ) 2 1. School of Materials Science and Engineering, Harbin
More informationLuoyang , Henan, China. Keywords: Cr-Mo Steel, Heat Treatment, Microstructure, Impact Toughness.
2017 International Conference on Mechanical Engineering and Control Automation (ICMECA 2017) ISBN: 978-1-60595-449-3 Effects of Quenching Temperature on Microstructure and Mechanical Properties of 75Cr-Mo
More informationInvestigation on temperature change of cold magnesium alloy strips rolling process with heated roll
University of Wollongong Research Online Faculty of Engineering - Papers (Archive) Faculty of Engineering and Information Sciences 12 Investigation on temperature change of cold magnesium alloy strips
More informationEngineering and Engineering
Ershi Qi Editors Jiang Shen Runliang Dou The 19th International Conference on Industrial Engineering and Engineering Management Engineering Economics Management ^ Springer Contents 1 A Study of Research
More informationEffect of homogenization treatment on microstructure and hot workability of high strength 7B04 aluminium alloy
Effect of homogenization treatment on microstructure and hot workability of high strength 7B04 aluminium alloy WANG Tao( 王涛 ) 1, 2, YIN Zhi-min( 尹志民 ) 1, SUN Qiang( 孙强 ) 2 1. School of Materials Science
More informationWe are IntechOpen, the world s leading publisher of Open Access books Built by scientists, for scientists. International authors and editors
We are IntechOpen, the world s leading publisher of Open Access books Built by scientists, for scientists 3,9 116, 12M Open access books available International authors and editors Downloads Our authors
More informationConstruction Engineering Construction Management By LI FENG QIANG ZHU BIAN GUO DAO SHENG
Construction Engineering Construction Management By LI FENG QIANG ZHU BIAN GUO DAO SHENG If looking for the ebook by LI FENG QIANG ZHU BIAN GUO DAO SHENG Construction Engineering Construction Management
More information660 MW. Vol. 31 No. 3 Mar NO x N /600 /620 45% 40% Fig. 1 Diagram of a principle thermal system for low temperature economizers 660 MW
31 1 2016 1 JOURNAL OF ENGINEERING FOR THERMAL ENERGY AND POWER Vol. 31 No. 3 Mar. 2016 1001-2060201603 - 0083-04 660 MW 310014 5 660 MW 2. 33 g / kwh / 1 000 Nm / kg TK223. 3 + 3 A DOI10. 16146 /j. cnki.
More informationProceedings of rd International Asia Conference on Industrial Engineering and Management Innovation(IEMI2012)
Proceedings of 2012 3rd International Asia Conference on Industrial Engineering and Management Innovation(IEMI2012) Runliang Dou Editor Proceedings of 2012 3rd International Asia Conference on Industrial
More informationSeparation and recovery of Ni, Co and Mn from spent lithium-ion batteries
21 5 2011 5 Vol.21 No.5 The Chinese Journal of Nonferrous Metals May 2011 1004-0609(2011)05-1192-07 1, 1, 2, 1, 1, 1 (1., 410083 2., 410083) H 2 SO 4 +H 2 O 2 N902 10:1 H 2 SO 4 2.5 mol/l H 2 O 2 2.0 ml/g(
More informationDISSIPATION OF ENERGY AND INSTABILITY PROCESS IN VARIOUS ALLOYS BASED ON PLASTOMETRIC TESTS
Materials Physics and Mechanics 25 (2016) 16-21 Received: October 15, 2015 DISSIPATION OF ENERGY AND INSTABILITY PROCESS IN VARIOUS ALLOYS BASED ON PLASTOMETRIC TESTS J. Klíber VŠB-TU Ostrava, FMMI, Department
More informationCu 70 Zr 30. Effects of cooling rate on primary phase and peritectic transformation in Cu 70 Zr 30 alloy (2014)
24 9 2014 9 Volume 24 Number 9 The Chinese Journal of Nonferrous Metals September 2014 1004-0609(2014)09-2295-07 Cu 70 Zr 30 1, 2 1 1, 2 1 1 3 (1. 330063 2. 330063 3. 710072) Cu 70 Zr 30 1042 957 5 m Cu
More informationSIMULATION AND APPLICATION OF LOOSE TOOLING FORGING FOR HEAVY GRINDING ROLLER SHAFT FORGINGS
Engineering Review, Vol. 35, Issue 1, 33-37, 2015. 33 SIMULATION AND APPLICATION OF LOOSE TOOLING FORGING FOR HEAVY GRINDING ROLLER SHAFT FORGINGS J. Su * F. Ren S. Jia S. Wei School of Material Science
More informationElectronic Supplementary Information (ESI) Self-assembly of Polyoxometalate / Reduced Graphene Oxide
Electronic Supplementary Material (ESI) for Journal of Materials Chemistry A. This journal is The Royal Society of Chemistry 2017 Electronic Supplementary Information (ESI) Self-assembly of Polyoxometalate
More informationMitigative Capacities of Plant Disposition Types and Space Types on. Urban Heat Island Effect. LU & Bo WANG b
Mitigative Capacities of Plant Disposition Types and Space Types on Urban Heat Island Effect Ying-ying LIUa & Yu-chen GUO & Xiang-dong XIAO & Sai WANG & Xiao-ping LU & Bo WANG b Department of horticulture,
More informationYao Xin Sheng. Position:Distinguished Professor(Academician) Faculty:State Key Laboratory Quality Research in. Chinese medicine
Yao Xin Sheng Position:Distinguished Professor(Academician) Faculty:State Key Laboratory Quality Research in Chinese medicine E-mail:tyaoxs@jnu.edu.cn Tel:+86-20-85225849 Fax:+86-20-85225849 Address: Room
More informationCurriculum Vitae of Cheng JIANG
General Curriculum Vitae of Cheng JIANG last updated 2017-03-20 Surname: Jiang Given Name: Cheng Date of birth: May, 1989 Place of Birth: Jiangsu Province, PR China Gender: Male Nationality: Chinese Phone:
More informationStudy on Mathematical Model for Pickling of Automotive High Strength Steel Xin-yu ZHANG, Hai-ting ZHOU, Hou-li LIU and Jian-jun CHEN *
2017 2 nd International Conference on Test, Measurement and Computational Method (TMCM 2017) ISBN: 978-1-60595-465-3 Study on Mathematical Model for Pickling of Automotive High Strength Steel Xin-yu ZHANG,
More informationPress Forging of Magnesium Alloy AZ31 Sheets
Materials Science Forum Online: 2007-03-15 ISSN: 1662-9752, Vols. 539-543, pp 1753-1758 doi:10.4028/www.scientific.net/msf.539-543.1753 2007 Trans Tech Publications, Switzerland Press Forging of Magnesium
More informationEffect of current density on surface temperature and tribology behavior of chromium bronze/brass couple
18 7 2008 7 Vol.18 No.7 The Chinese Journal of Nonferrous Metals Jul. 2008 1004-0609(2008)07-1237-05 / 1, 2 2 1 2 2 2 2 (1. 710049 2. 471003) / / / TH 117.3 A Effect of current density on surface temperature
More informationINFLUENCE OF MICROSTRUCTURE ON TENSILE PROPERTIES OF MAGNESIUM ALLOY AZ91
INFLUENCE OF MICROSTRUCTURE ON TENSILE PROPERTIES OF MAGNESIUM ALLOY AZ91 ŠTĚPÁNEK Roman 1, PANTĚLEJEV Libor 1, MAN Ondřej 2 1 Institute of Materials Science and Engineering, NETME centre, Brno University
More informationResearch Article One-step Inverse Forming Simulation on Hot Forming Process of High-strength Food-can Tinplate
Advance Journal of Food Science and Technology 10(1): 26-30, 2016 DOI: 10.19026/ajfst.10.1747 ISSN: 2042-4868; e-issn: 2042-4876 2016 Maxwell Scientific Publication Corp. Submitted: April 19, 2015 Accepted:
More informationDEFECT CONTROL IN THIXOMOLDING PROCESS AZ91D PRESENTED BY PRASHANT PATEL
MICROSTRUCTURE EVALUATION DEFECT CONTROL IN THIXOMOLDING PROCESS AZ91D PRESENTED BY PRASHANT PATEL OUT LINE FOR PRESENTATION INTRODUCTION THIXO-MOLDING PROCESS DEFECTS IN CASTING EXPERIMENTAL DETAILS RESULT
More informationVol. 31 No. 5 May x HCN / HCN /NH Hayhurst. Gardon. Fe 2 O 3 Fe. NO x NO x. Fe 2 O 3. 1 mg Fe 2 O 3 NO NO
31 5 2016 5 JOURNAL OF ENGINEERING FOR THERMAL ENERGY AND POWER Vol. 31 No. 5 May. 2016 1001-2060 2016 05-0129 - 06 NO 1 1 2 1. 200093 2. 201620 NO x Fe NO NO Fe Fe 2 O 3 NO x HCN / 100 mg700 800 900 NO
More informationRheo-squeeze casting of semi-solid A356 aluminum alloy slurry
Rheo-squeeze casting of semi-solid A356 aluminum alloy slurry MAO Wei-min( 毛卫民 ), ZHENG Qiu( 郑秋 ), ZHU Da-ping( 朱达平 ) School of Materials Science and Engineering, University of Science and Technology Beijing,
More informationChina. Keywords: Automotive manufacturing, Servitization, Total factor productivity (TFP), Research and development (R&D).
2016 3 rd International Conference on Social Science (ICSS 2016) ISBN: 978-1-60595-410-3 The SWOT and Countermeasures Analysis about Automotive Manufacturing Servitization in Guangxi Based on the Perspective
More informationThe Influence of Ca and Y on the Microstructure and Corrosion. Resistance of Vacuum Die Casting AZ91 Alloy
The Influence of Ca and Y on the Microstructure and Corrosion Resistance of Vacuum Die Casting AZ91 Alloy Feng Wang 1, Jibao Li 1, Jing Liu 1, Pingli Mao 1, Zheng Liu 1 (1 School of Material Science and
More informationCHAPTER 2: LITERATURE SURVEY
7 CHAPTER 2: LITERATURE SURVEY 2.1. Introduction The powder metallurgy processing is one of the oldest and economic routes for producing critical and complex shaped products [1-3]. P/M is one of the most
More informationANALYSIS OF HOT WORKABILITY OF NICKEL-CHROMIUM ALLOY
ANALYSIS OF HOT WORKABILITY OF NICKEL-CHROMIUM ALLOY ŁUKASZEK-SOŁEK Aneta 1, ŚWIĄTONIOWSKI Andrzej 2, CELADYN Krzysztof 2* 1 AGH University of Science and Technology, Faculty of Metals Engineering and
More informationStatic recrystallization behaviour of Ti-Nb microalloyed high-strength steel
http://dx.doi.org/10.17159/2411-9717/2017/v117n5a7 Static recrystallization behaviour of Ti-Nb microalloyed high-strength steel by C-Y. Zhou*, G-L. Wu *, and X-B. Liu* The static recrystallization behaviour
More informationInternational Conference on Traffic Engineering and Transportation System (ICTETS 2017)
International Conference on Traffic Engineering and Transportation System (ICTETS 2017) Haikou City, China 27 29 October 2017 Editors: Dongfang Yang Henry Zhang ISBN: 978-1-5108-5209-9 Printed from e-media
More informationUltrasonic enhanced electroless copper plating on microporous polyurethane foam
42 1 ( ) Vol.42 No.1 2011 1 Journal of Central South University (Science and Technology) Jan. 2011 ( 410083) 0.3 mm ph 16 g/l 30 g/l Na 2 EDTA 20 g/l α,α - 25 mg/l 25 mg/l PEG-1000 1 g/l 5 ml/l ph 12.5~13.0
More informationMg-Al alloys, such as AZ91 and AM60 alloys, have been
Effect of Cu addition on microstructure and properties of Mg-10Zn-5Al-0.1Sb high zinc magnesium alloy *You Zhiyong, Zhang Yuhua, Cheng Weili, Zhang Jinshan and Wei Yinghui ( College of Materials Science
More informationDownloaded from
Proceedings of The Intl. Conf. on Information, Engineering, Management and Security 2014 [ICIEMS 2014] 144 Effects of Combined Addition of Aluminum Oxide, Fly Ash, Carbon and Yttrium on Density and Hardness
More informationJournal of Chemical and Pharmaceutical Research, 2013, 5(9): Research Article. Stability analysis of cantilever retaining wall with FEM
Available online www.jocpr.com Journal of Chemical and Pharmaceutical Research, 2013, 5(9):362-371 Research Article ISSN : 0975-7384 CODEN(USA) : JCPRC5 Stability analysis of cantilever retaining wall
More informationStudyofEffectofDeformationTemperatureon6061AluminiumAlloybyThermoMechanicalSimulation
Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering Volume 14 Issue 2 Version 1.0 Type: Double Blind Peer Reviewed International Research Journal Publisher: Global Journals
More informationA New Less-Loading Extrusion Technology of Mg Alloy Tube Workpiece
2nd International Forum on Electrical Engineering and Automation (IFEEA 215) A New Less-Loading Extrusion Technology of Mg Alloy Tube Workpiece Qiang Wang1,a, Zhimin Zhang2,b, Yong Xue1,Jianmin Yu2 1 Dept.
More informationDie structure optimization of equal channel angular extrusion for AZ31 magnesium alloy based on finite element method
Die structure optimization of equal channel angular extrusion for AZ31 magnesium alloy based on finite element method HU Hong-jun( 胡红军 ) 1, 2, ZHANG Ding-fei( 张丁非 ) 1, 3, PAN Fu-sheng( 潘复生 ) 1, 3 1. National
More informationStrain-rate sensitivity of tensile behaviors for nickel-based superalloys GH3044 and GH4033 at room temperature
Indian Journal of Engineering & Materials Sciences Vol. 23, October 2016, pp. 336-340 Strain-rate sensitivity of tensile behaviors for nickel-based superalloys GH3044 and GH4033 at room temperature Changying
More informationHot Deformation Behavior of High Strength Low Alloy Steel by Thermo Mechanical Simulator and Finite Element Method
IOP Conference Series: Materials Science and Engineering PAPER OPEN ACCESS Hot Deformation Behavior of High Strength Low Alloy Steel by Thermo Mechanical Simulator and Finite Element Method To cite this
More informationHot Deformation and Dynamic Recrystallization Behavior of the Cu-Cr-Zr-Y Alloy
JMEPEG (216) 25:115 1156 ASM International DOI: 1.17/s11665-16-1914-x 159-9495/$19. Hot Deformation and Dynamic Recrystallization Behavior of the Cu-Cr-Zr-Y Alloy Yi Zhang, Sun Huili, Alex A. Volinsky,
More informationRESEARCH AND DEVELOPMENT OF THE INFORMATION MANAGEMENT SYSTEM OF AGRICULTURAL SCIENCE AND TECHNOLOGY TO FARMER BASED ON GIS
RESEARCH AND DEVELOPMENT OF THE INFORMATION MANAGEMENT SYSTEM OF AGRICULTURAL SCIENCE AND TECHNOLOGY TO FARMER BASED ON GIS Hao Zhang 1, Lei Xi 1, Xinming Ma 1,2,*, Zhongmin Lu 3, Yali Ji 1, Yanna Ren
More informationRESEARCH AND DEVELOPMENT OF THE INFORMATION MANAGEMENT SYSTEM OF AGRICULTURAL SCIENCE AND TECHNOLOGY TO FARMER BASED ON GIS
RESEARCH AND DEVELOPMENT OF THE INFORMATION MANAGEMENT SYSTEM OF AGRICULTURAL SCIENCE AND TECHNOLOGY TO FARMER BASED ON GIS Hao Zhang 1, Lei Xi 1, Xinming Ma 1,2,*, Zhongmin Lu 3, Yali Ji 1, Yanna Ren
More informationXi an, China July 19-22, 2013
The 14th SCBA International Symposium The Second Announcement Xi an, China July 19-22, 2013 Dear Colleague: We are deeply honored to invite you to attend the Fourteenth International Symposium of the Society
More informationDesign and Optimization of Large-section Profile Die for AZ80 Alloy
5th International Conference on Advanced Design and Manufacturing Engineering (ICADME 2015) Design and Optimization of Large-section Profile Die for AZ80 Alloy Minglong MA a *, Haizhen WANG, Kui ZHANG
More informationMODELLING HOT DIE FORGING PROCESS OF THE Ti-10V-2Fe-3Al ALLOY. Aneta ŁUKASZEK-SOŁEK, Sylwia BEDNAREK
MODELLING HOT DIE FORGING PROCESS OF THE Ti-10V-2Fe-3Al ALLOY Aneta ŁUKASZEK-SOŁEK, Sylwia BEDNAREK AGH University of Science and Technology, Faculty of Metals Engineering and Industrial Computer Science,
More informationEffect of heat treatment on microstructures and mechanical properties of extruded-rolled AZ31 Mg alloys
Effect of heat treatment on microstructures and mechanical properties of extruded-rolled AZ31 Mg alloys QIU Wei( ) 1, 2, HAN En-hou( ) 2, LIU Lu( ) 2 1. School of Energy and Power Engineering, Changsha
More informationINVERSE ANALYSIS OF PLANE STRAIN AND UNIAXIAL COMPRESSION TESTS PERFORMED ON GLEEBLE
INVERSE ANALYSIS OF PLANE STRAIN AND UNIAXIAL COMPRESSION TESTS PERFORMED ON GLEEBLE AKSENOV Sergey 1, PUZINO Yuriy 1, MAZUR Igor 2 1 National Research University Higher School of Economics, Moscow, Russian
More informationDevelopment of Hot Drawing Process for Nitinol Tube
Development of Hot Drawing Process for Nitinol Tube Wei Chen 1,2,3, H. Wang 2, Lei Zhang 1, Xiusan Tang 1 1 Academy of Armored Forces Engineering, China; 2 Faculty of Engineering and Surveying, University
More information2nd International Conference on Biological Sciences and Technology (BST 2017)
2nd International Conference on Biological Sciences and Technology (BST 2017) Advances in Biological Sciences Research Volume 6 Zhuhai, China 17 19 November 2017 Editors: Hossein Ganjidoust Stefan Talu
More informationResistance Spot Welding Parameters Optimal Selection for Automotive Steel Plate
International Journal of Systems Engineering 2018; 2(1): 36-41 http://www.sciencepublishinggroup.com/j/ijse doi: 10.11648/j.ijse.20180201.18 Resistance Spot Welding Parameters Optimal Selection for Automotive
More informationEffect of β/α Strength Ratio on the Stress-Strain Curve of Beta Titanium Alloy by Finite Element Modelling
Effect of β/α Strength Ratio on the Stress-Strain Curve of Beta Titanium Alloy by Finite Element Modelling Srinivasu G & R. N. Rao Mechanical Engineering Department, National Institute of Technology Warangal,
More informationPreform and Process Design of Ti-6Al-4V Compressor Blade using Equipotential Lines and 3D FE Simulation
Int J Advanced Design and Manufacturing Technology, Vol. 11/ No. 1/ March - 2018 43 Preform and Process Design of Ti-6Al-4V Compressor Blade using Equipotential Lines and 3D FE Simulation Mahdi Soleimanzadeh
More informationPlastic Deformation Mechanism in Double Roller Clamping Spinning of Flanged Thin Walled Cylinder
https://doi.org/10.1186/s10033-018-0254-1 Chinese Journal of Mechanical Engineering ORIGINAL ARTICLE Open Access Plastic Deformation Mechanism in Double Roller Clamping Spinning of Flanged Thin Walled
More informationReview Article ADVANCEMENTS IN CONCRETE FILLED STEEL TUBULAR (CFST) COLUMNS - A REVIEW. *Corresponding author:sankar Jegadesh J S
Int. J. Struct. & Civil Engg. Res. 2014 Sankar Jegadesh J S and S Jayalekshmi, 2014 Review Article ADVANCEMENTS IN CONCRETE FILLED STEEL TUBULAR (CFST) COLUMNS - A REVIEW Sankar Jegadesh J S 1 * and S
More informationApplication of Numerical Simulation on the Manufacturing Process Qualification of Nuclear Power Plant Steam Generator Tube-sheet
Application of Numerical Simulation on the Manufacturing Process Qualification of Nuclear Power Plant Steam Generator Tube-sheet Shao Jun ZHANG 1,a, Shu Hua LIANG 2, Wen Bin YANG 1, Zhao LIU 1 and Dong
More informationMicrostructural evolution of SKD11 tool steel during multi-stage thixoforming and subsequent heat treatments
Microstructural evolution of SKD11 tool steel during multi-stage thixoforming and subsequent heat treatments Yi Meng 1, a *, Hui-Min Zhou 1, Jia-Lin Gan 1 and Sumio Sugiyama 2 1 College of Materials Science
More informationAn Analysis of Three Different Dies Profile for Cold Extrusion Process
An Analysis of Three Different Dies Profile for Cold Extrusion Process ShubhamShrivastava 1, Prof K.K. Jain 2 1 Research scholar, Department of mechanical Engg SRIT, Jabalpur, (M.P) 2 Prof., Department
More informationAvailable online at ScienceDirect. Procedia Engineering 174 (2017 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 174 (2017 ) 904 909 13th Global Congress on Manufacturing and Management, GCMM 2016 Design and Analysis of Cushioning Packaging
More informationFinite Element Simulation on Cross Shear Ratio in Asymmetrical Rolling
doi: 10.14355/ijmme.015.04.008 Finite Element Simulation on Cross Shear Ratio in Asymmetrical Rolling D.L.Tang *1, X.H.Liu, M.Song 3, X.K.Sun 4 Northeastern University research academy, Northeastern University,
More informationThe visualized detection research of transmission line internal defects based on X-ray digital radiography. , Jiankun Zhao
The visualized detection research of transmission line internal defects based on X-ray digital radiography Xuan Zhang 1, 2, a, Zhangqin Wu 3, a, Shuting Wan 1, a, Weidong Li 1, a, Zhixiang Li 3, Shizhao
More informationForging Condition for Removing Porosities in the Hybrid Casting and Forging Process of 7075 Aluminum Alloy Casting
Materials Transactions, Vol. 45, No. 6 (2004) pp. 1886 to 1890 #2004 The Japan Institute of Metals Forging Condition for Removing Porosities in the Hybrid Casting and Forging Process of 7075 Aluminum Alloy
More informationThe Calculation and Analysis of Distribution Network Loss with. Photovoltaic Power Generation Connected
International Conference on Advances in Energy and Environmental Science (ICAEES 2015) The Calculation and Analysis of Distribution Network Loss with Photovoltaic Power Generation Connected Bi Wang1, a,yingying
More informationInternational Conference on Manufacturing Engineering and Intelligent Materials (ICMEIM 2017)
International Conference on Manufacturing Engineering and Intelligent Materials (ICMEIM 2017) Advances in Engineering Research Volume 100 Guangzhou, China 25 26 February 2017 Editors: Md Radzai Said Li
More informationArch. Metall. Mater. 62 (2017), 2B,
Arch. Metall. Mater. 62 (2017), 2B, 1191-1196 DOI: 10.1515/amm-2017-0175 J.-H. LEE*, D.-O. KIM**, K. LEE*** # COMPRESSIVE DEFORMATION BEHAVIOR OF THICK MICRO-ALLOYED HSLA STEEL PLATES AT ELEVATED TEMPERATURES
More information1. 1 : TG : A , ACUSOL445N,APG,OCTA,OS-15. , cm cm cm, Vol. 9 No. 4 Nov EL ECTROCHEMISTR Y
9 4 2003 11 EL ECTROCHEMISTR Y Vol 9 No 4 Nov 2003 :1006-3471 (2003) 04-0416- 06, 3,, (, 266003) :,,,,,APG,OCTA, OCTA : ; ; : TG 174 12 : A, [11 ] [2 ] [3 5 ], [6 ],,, ACUSOL445N,APG,OCTA,OS-15 [7 11 ]
More informationGROWTH BEHAVIOR OF GH720LI ALLOY
THE EFFECT OF PRIMARY γ DISTRIBUTION ON GRAIN GROWTH BEHAVIOR OF GH720LI ALLOY Maicang Zhang, Jianxin Dong, Zhongnan Bi, Qiuying Yu University of Science and Technology Beijing, Beijing, 100083, P R China
More informationInternational Conference on Economic Science with Heterogeneous Interacting Agents, 2009
International Conference on Economic Science with Heterogeneous Interacting Agents, 2009 18~20 June, 2009 Beijing, China Sponsored by: ESHIA - Society for Economic Science with Heterogeneous Interacting
More informationEffect of annealing cooling rate on microstructure and mechanical property of 100Cr6 steel ring manufactured by cold ring rolling process
J. Cent. South Univ. (2014) 21: 14 19 DOI: 10.1007/s11771 014 1909 4 Effect of annealing cooling rate on microstructure and mechanical property of 100Cr6 steel ring manufactured by cold ring rolling process
More informationInvestigation on the homogenization annealing treatment of 5052-based aluminum alloys
Indian Journal of Engineering & Materials Sciences Vol. 24, February 2017, pp. 57-62 Investigation on the homogenization annealing treatment of 5052-based aluminum alloys Jing Zhang*, Jingjing Zhao & Rulin
More informationTechnologies for Process Design of Titanium Alloy Forging for Aircraft Parts
Technologies for Process Design of Titanium Alloy Forging for Aircraft Parts Takashi CHODA *1, Dr. Hideto OYAMA *2, Shogo MURAKAMI *3 *1 Titanium Research & Development Section, Titanium Div., Iron & Steel
More informationApplication of ductile fracture criterion for tensile test of zirconium alloy 702
Scientia Iranica B (2018) 25(2), 824{829 Sharif University of Technology Scientia Iranica Transactions B: Mechanical Engineering http://scientiairanica.sharif.edu Research Note Application of ductile fracture
More informationChemical Analysis of the Mechanical Properties of Aluminum Magnesium Alloy Badminton Racket under Heat Treatment
247 A publication of CHEMICAL ENGINEERINGTRANSACTIONS VOL. 55, 2016 Guest Editors:Tichun Wang, Hongyang Zhang, Lei Tian Copyright 2016, AIDIC Servizi S.r.l., ISBN978-88-95608-46-4; ISSN 2283-9216 The Italian
More informationStudy of Roll Forming Bending in Different Temperature
International Journal of Materials Science and Applications 2016; 5(3): 129-135 http://www.sciencepublishinggroup.com/j/ijmsa doi: 10.11648/j.ijmsa.20160503.13 ISSN: 2327-2635 (Print); ISSN: 2327-2643
More informationDispersion stability of nano-tungsten disulfide particulates
41 2 ( ) Vol.41 No.2 2010 4 Journal of Central South University (Science and Technology) Apr. 2010 1 1 2 (1. 410083 2. 410083) TF123.7 TH117.2 A 1672 7207(2010)02 0476 07 Dispersion stability of nano-tungsten
More informationRheological Behavior under Hot Compression and the Constitutive Model of 35CrMo Steel
WENJING LI et al: RHEOLOGICAL BEHAVIOR UNDER HOT COMPRESSION AND THE CONSTITUTIVE Rheological Behavior under Hot Compression and the Constitutive Model of 35CrMo Steel Wenjing Li 1, Yuanchun Huang 1,*,Zhengbin
More informationSIMULATION ANALYSIS OF MINIMUM BENDING RADIUS FOR LEAD FRAME COPPER ALLOYS
Engineering Review, Vol. 33, Issue 2, 101-106, 2013. 101 SIMULATIO AALYSIS OF MIIMUM BEDIG RADIUS FOR LEAD FRAME COPPER ALLOYS J. Su * S. Jia F. Ren School of Materials Science and Engineering, Henan University
More informationThe Microstructure and Mechanical Properties of Inconel 718 Fine Grain Ring Forging
The Microstructure and Mechanical Properties of Inconel 718 Fine Grain Ring Forging Zixing Wang 1, Dianhua Zhou 1, Qun Deng 2, Guosheng Chen 1, Wei Xie 1 1 Special Steel R & D Center of Special Steel Business
More informationInfluence Factors on Stress Distribution of Electric Furnace Roof
Sensors & Transducers 2013 by IFSA http://www.sensorsportal.com Influence Factors on Stress Distribution of Electric Furnace Roof Jia Liu, Gongfa Li, Guozhang Jiang, Jianyi Kong, Shao Yang Shi, Yikun Zhang,
More informationAvailable online at ScienceDirect. Procedia Engineering 84 (2014 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 84 (2014 ) 868 872 2014 ISSST, 2014 International Symposium on Safety Science and Technology Study on attenuation law of open-pit
More informationElectronic Supplementary Information (ESI)
Electronic Supplementary Material (ESI) for RSC Advances. This journal is The Royal Society of Chemistry 2018 Electronic Supplementary Information (ESI) Rationally Designed Hierarchical Porous CNFs/Co
More informationAvailable online at ScienceDirect. Procedia Engineering 81 (2014 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 81 (14 ) 1744 1749 11th International Conference on Technology of Plasticity ICTP 14 19-4 October 14 Nagoya Congress Center
More informationResearch Development of the Traditional and Flexible Shed-holes Yunfei Luo1, 3, Jiao Jiang2, Jianrong Yang1, 2, Yitang Zhou2
th International Conference on Civil Engineering and Transportation (ICCET 01) Research Development of the Traditional and Flexible Shed-holes Yunfei Luo1, 3, Jiao Jiang, Jianrong Yang1,, Yitang Zhou (1.
More informationStudy on Microstructure and Mechanical Properties of Titanium-bearing High-strength Hot-rolled Steels for Enamelling
Study on Microstructure and Mechanical Properties of Titanium-bearing High-strength Hot-rolled Steels for Enamelling Quanshe Sun (1), Faliang Jv (2), Weizhong Jiang (3) (1) R & D Center, Baoshan Iron and
More informationAvailable online at ScienceDirect. Procedia Engineering 81 (2014 )
Available online at www.sciencedirect.com ScienceDirect Procedia Engineering 81 (14 ) 1481 1486 11th International Conference on Technology of Plasticity, ICTP 14, 19-24 October 14, Nagoya Congress Center,
More informationSTUDY OF PROCESS PARAMETERS IN FRICTION STIR WELDING OF DISSIMILAR ALUMINIUM ALLOYS
Proceedings of the 2011 International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, January 22 24, 2011 STUDY OF PROCESS PARAMETERS IN FRICTION STIR WELDING OF
More informationSimulation Analysis and Application of Hot Rolled Large Size H-beams
Simulation Analysis and Application of Hot Rolled Large Size H-beams Guoming Zhu, Xingye Guo, Chao Lu, Yonglin Kang, Sixun Zhang School of Material Science and Engineering, University of Science and Technology
More informationGuo-zheng Quan, Chun-tang Yu, Ying-ying Liu, and Yu-feng Xia
Hindawi Publishing Corporation e Scientific World Journal Volume 214, Article ID 18492, 12 pages http://dx.doi.org/1.1155/214/18492 Research Article A Comparative Study on Improved Arrhenius-Type and Artificial
More informationElectroless copper plating on microcellular polyurethane foam
Electroless copper plating on microcellular polyurethane foam TIAN Qing-hua( ), GUO Xue-yi( ) School of Metallurgical Science and Engineering, Central South University, Changsha 410083, China Received
More informationBonding strength of Al/Mg/Al alloy tri-metallic laminates fabricated
Bull. Mater. Sci., Vol. 34, No. 4, July 2011, pp. 805 810. Indian Academy of Sciences. Bonding strength of Al/Mg/Al alloy tri-metallic laminates fabricated by hot rolling X P ZHANG, *, M J TAN, T H YANG,
More informationwrought = rolled, extruded, forged heat treatable non-heat treatable
Physical metallurgy of alluminium Wrought Al alloys wrought = rolled, extruded, forged heat treatable non-heat treatable International alloy designation system (IADS) e.g. 1XXX = Al 7XXX = Al-Zn-Mg-(Cu)
More informationShyh-Ming Huang ( 黃識銘 )
Shyh-Ming Huang ( 黃識銘 ) Department of Marketing and Logistics Management Southern Taiwan University of Science Technology No. 1, Nan-Tai Street, Yongkang Dist., Tainan City 71005, Taiwan Office: T1128
More informationDC casting of light alloys under magnetic fields
DC casting of light alloys under magnetic fields CUI Jian-zhong( 崔建忠 ), ZHANG Zhi-qiang( 张志强 ), LE Qi-chi( 乐启炽 ) Key Laboratory of Electromagnetic Processing of Materials of Ministry of Education, Northeastern
More informationInfluences of Recovery and Recrystallization Interannealing on Properties of Hard Drawn Aluminium Wire
2017 Asia-Pacific Engineering and Technology Conference (APETC 2017) ISBN: 978-1-60595-443-1 Influences of Recovery and Recrystallization Interannealing on Properties of Hard Drawn Aluminium Wire Xuexia
More informationProcess design based on FE simulations and experiments of forging a complex-shaped magnesium alloy adaptor
Manufacturing Rev. 2017, 4, 9 Ó W. Xu et al., Published by EDP Sciences, 2017 DOI: 10.1051/mfreview/2017007 Available online at: http://mfr.edp-open.org RESEARCH ARTICLE OPEN ACCESS Process design based
More information*Corresponding author. Keywords: Logistics management specialty, Experimental course system, Local colleges and universities in Guangxi.
2016 International Conference on Education, and Applied Social Science (EMASS 2016) ISBN: 978-1-60595-400-4 Construction of Training Course System of Logistics Specialty of Guangxi Local Colleges and Universities
More informationFinite Element Study on Thermal Fatigue Depth of Aluminum Alloy Die Casting Die
2015 2 nd International Conference on Material Engineering and Application (ICMEA 2015) ISBN: 978-1-60595-323-6 Finite Element Study on Thermal Fatigue Depth of Aluminum Alloy Die Casting Die C. G. Pan,
More information