Foil-Faced Fiberglass Fabric 84215/9480 HT
|
|
- Franklin Harrell
- 5 years ago
- Views:
Transcription
1 Foil-Faced Fiberglass Fabric 84215/9480 HT Description Foil-Faced Fiberglass Fabric 84215/9480 HT has been specifically designed as shipboard lagging and jacketing material for use over insulation where the surface temperature is under 500 F. The base fabric is laminated to aluminum foil to provide a vapor barrier. Advantages Foil-Faced Fiberglass Fabric 84215/9480 HT is finished with treatment 9383 to set the weave and reduce fraying when cut. The laminating adhesive is suitable for use up to 500 F. PROPERTY DATA STYLE 84215/9480 HT CHARACTERISTIC METHOD VALUES ENGLISH METRIC WEIGHT ASTM-D oz/sy ± 10% 408 g/m % THICKNESS ASTM-D ±.001" mm mm TENSILE STRENGTH TEAR STRENGTH ASTM-D ASTM-D Warp- Fill- Warp- Fill- 75 Ibs/inch 50 Ibs/inch 20 lbs 25 Ibs kg/cm 8.93 kg/cm 9.07 kg kg BURST STRENGTH ASTM-D psi 8.75 kg/cm2 FLAME RESISTANCE FED 191/ Char Length 1 inch max 2.54 cm max. Afterglow 1 sec. max 1 sec. max Flame Out 1 sec. max 1 sec. max TEMPERATURE RESISTANCE FED SPEC HHB-100B 500 F max. 260 C max. BASE FABRIC and WEAVE COLOR and COATING Fiberglass/Plain Weave Fabric Color/ Aluminum Foil All values are nominal unless otherwise specified. All statements herein are expressions of opinion that we believe to be accurate and reliable, but are presented without guarantee or responsibility on our part. Statements concerning possible use of our products are not intended as recommendations for their use alone or in combination with any materials or elements to infringe any patents. No patent warranty of any kind, express or implied, is made or intended.
2 DESCRIPTION Alpha maritex Style 2025/9480 meets the requirements of Coast Guard Specification for fire-retardant material and is included in Military Specification MIL-C-20079G, Type 1, Class 10. Meets Military Specification MIL B and NRC Guide 1.36 Alpha Maritex. Style 2025/9480 has been specifically designed for flange shield material by the U.S. Navy. Since it must meet Coast Guard Specification, a very low percentage.of adhesive is used. Material should be tested prior to use for commercial applications. ADVANTAGES Alpha Maritex Style 2025/9480 is finished with treatment #9383 to set the weave and reduce fraying when cut. This fabric is then laminated to aluminum foil to provide a vapor retarder and a barrier to water and oil. PROPERTY DATA STYLE CHARACTERISTIC METHOD VALUES' English Metric WEIGHT ASTM-D oz/sy ± 10% 653 g/m 3 ± 10% THICKNESS ASTM-D "± 10% mm ± 10% TENSILE STRENGTH ASTM-D Warp- 250 lbs/inch kg/cm Fill- 250 lbs/inch kg/cm TEAR STRENGTH ASTM-D Warp- 50 lbs kg Fill- 50 lbs kg BURST STRENGTH ASTM-D psi 38.5 kg/cm 2 FLAME RESISTANCE FED 191/ Char Length 1 inch max cm max. Afterglow 1 second max. 1 second max. Flame Out 1 second max. 1 second max. TEMPERATURE RESISTANCE BASE FABRIC and WEAVE COLOR and COATING FED SPEC HHB Service Temp = +300 F 149 C Fiberglass/Plain Weave Aluminum Foil WIDTHS ROLL LENGTH WEIGHT / ROLL 36" ( cm) 50 YD. (45.72 m) 61 lbs (27.67 kg) 48" (121.9 cm) 50 YD 90 lbs (40.82 kg) 60" (152.4 cm) 50 YD 114 lbs (51.71 kg) 'All values are nominal unless otherwise specified
3 0.125" Manniglas 1200 NONWOVEN GLASS-FIBER FOR CRITICAL THERMAL BARRIER DATA SHEET Note: Product data sheet presents nominal property data only and should not be interpreted as a specification. FEATURES Highest UL Rating (94V-0) for Non- Flammability Made from Electrical Grade Glass-Fiber Withstands Humidity and Continuous Operating Temperatures up to 1,450 F Without Shrinkage or Losing Shape Low-Density Nonwoven provides Low Cost per Unit Area Similar Thermal Performance to Woven Glass at a Fraction of the Cost Can be Used Alone or Laminated to Foil for Enhanced Thermal Performance TYPICAL PHYSICAL PROPERTIES Laminated to Foil and used as Thermal Barrier for Light Fixtures Die Cut and used as a Seal in Furnace Applications Laminated for Thermal Shielding in the Automotive Industry Aircraft Noise Reduction and Thermal Protection Application Insulation for Outlet Pipe in Stoves Diagnostic Reagent Test Kits, Pregnancy Testing and Ovulation Testing TEST METHOD MATERIAL PROPERTY ENGLISH METRIC BASED ON BASIS WEIGHT (lb/2880 sq. ft. ) (g/m 2 ) TAPPI T-410 THICKNESS* 0.5 PSI (in) (mm) TENSILE STRENGTH Machine Direction 45.0 (lb/in) 20.1 (kg/25mm) TAPPI T-494 Cross Direction 50.0 (lb/in) 22.7 (kg/25mm) TAPPI T-494 MULLEN 140 (psi) 965 (kpa) TAPPI T-403 ASH 94 (%) 94 (%) TAPPI-T-1013 THERMAL CONDUCTIVITY ASTM C F.21 (BTU/in/hr.ft 2, F) 0.03 [W/m.K)] 250 F F F.57 0, F *Thickness measured using an 0.5 gauge GENERAL INFORMATION ROLL WIDTHS 2"-104 EFFECTIVE COVERAGE STANDARD ROLL DIAMETER STANDARD ROLL DIAMETER.813 lbs./sq. yd, 3" ID 38" OD Individual Rolls Wrapped In Polyurethane Custom Slitting Services ISO 9001 Approval High Temperature Thermal Laboratory With Thermal Imaging Capabilities Testing From -425 F 1200 F
4 SPECIFICATION SHEET NYLON SIZE GOV'T APPROX YDS/LBS APPROX BREAK ELONGATION DIAMETER TPI , LBS MAX. 26% S X 12Z 23 A 20, LBS MAX. 26Y S X 12Z 33 AA 13, LBS MAX. 26% S X 12Z 15/3 B 10, LBS MAX. 26% S X 11Z 16 B 9, LBS MAX. 26% S X 11Z 63 E 6, LBS MAX. 26% S X 9Z 92 F 4, LBS MAX. 26% S X 9Z 138 FF 3, LBS MAX. 26% S X 9Z 207 3/C 2, LBS MAX S X 9Z 277 4/C 1, LES MAX. 26% S X 5Z 346 5/C 1, LBS MAX. 26% S X 5Z 415 6/C 1, LBS MAX. 26% S X 5Z 554 8/C LBS MAX. 26% S X 5Z Effect of Heat: Sticks at 445 F. Melts at 485 to 500 F. Yellows slightly at 300 F when held for 5 hours. Effects of Bleaches and Solvents: Can be bleached in most bleaching solutions. Generally insoluble in most organic solvents. Soluble in some phenolic compounds. Effects of Acids & Alkalis: Unaffected by most mineral acids, except hot mineral acids. Dissolves with partial decomposition in concentrated solutions of hydrochloric, sulphuric, and nitric acids. Soluble in formic acids. Substantially inert in alkalis. Effects of Mildew, Aging, Sunlight & Abrasion: Excellent resistance to mildew, aging and abrasion. Prolonged exposure to sunlight causes some deterioration. Dyes Used: Disperse, acid and premetalized are usually preferred, but most other classes are allowed.
5 S301 - Dublfilm Double Coated UPVC FEATURES Exceptionally high tack and peel UPVC film allows conformability High adhesive mass provides excellent gap filling properties Excellent resistance to environmental extremes Exhibits excellent adhesion to ether and ester foams Initial peel adhesion to stainless (20 min. at R.T.) = 126 oz/in (PSTC 3 Mod.) ADVANTAGES GENERAL INFORMATION Dublfilm S301 is an 8.5 mil, double coated, UPVC film incorporating an exceptionally high tack, high peel, acrylic adhesive system. It is primarily used for difficult bonding and splicing applications. PRODUCT CONSTRUCTION Type Mil Thickness Backing Adhesive (unwind) Adhesive (liner) Liner Type (outer) Thickness (total) UPVC - Unplasticized 1.50 Polyvinylchloride Acrylic 3.50 Acrylic 3.50 Paper (3.5 mil, 60# kraft) 8.50 PRIMARY PHYSICAL PROPERTIES - Unwind Side Liner Side Adhesion-to-Steel Peel oz/in oz/in Adhesive Activation Pressure Elongation Percent 60.00% Product assembly Difficult splicing applications Lamination to EPDM rubber Bonding urethane foams Adhering to rough or porous surfaces Joining extruded plastics MARKETS SERVED SECONDARY PHYSICAL PROPERTIES THERMAL / ELECTRICAL PROPERTIES Minimum Application Temperature Minimum Service Temperature Maximum Short-Term Temperature SPECIFICATIONS TAPE MAY MEET 65 F -40 F 200 F Industrial The physical properties listed are typical values and are not to be considered as specifications. Our suggestions for use are based on tests we believe to be reliable. However, the purchaser must carry out their own tests to determine the suitability of the product for their internal use. Information is given in good faith, but without warranty. It is essential, as with all pressure-sensitive tapes, that the surface to which the tape is applied be clean, dry and free of grease and oil. Shelf life from date of manufacture is based on the product being stored at 70 F(21 C) j 50% relative humidity out of direct sunlight. Specification compliance is dynamic and should only be used as a general guide. Always confirm that the tape you are interested in currently complies with all specification requirements. Please verify that the product number that you select is available in the proper size and color to meet your specification.
ALPHA ASSOCIATES, INC.
ALPHA ASSOCIATES, INC. PTFE COATED FIBERGLASS FABRICS, TAPES AND BELTS FABRICS, TAPES AND BELTS combines PTFE coatings with a woven fiberglass substrate to produce fabrics, tapes and belts with excellent
More informationSift-Socks Nylon Connectors
JANUARY 2018 Sift-Socks Nylon Connectors RUBBER-COATED NYLON (RCN) Very pliable soft rubber coating on a two-way nylon backing. The rubber portion of the rubber coated nylon fabric is in compliance with
More informationCS-75 Water-Based Adhesive Surface Primer
CS-75 Water-Based Adhesive Surface Primer Enhances the bonding between preformed sealants and concrete surfaces aiding in the installation process. Stops water penetration of the concrete. Conveniently
More informationSECTION HVAC INSULATION
PART 1 GENERAL 1.1 SUMMARY SECTION 23 07 00 HVAC INSULATION A. Section Includes: 1. Ductwork insulation. 2. Duct liner. 3. Insulation jackets. 4. Equipment insulation 5. Piping system insulation. 6. Insulation
More informationPERMATHERM PIPE INSULATION PRODUCTS
PERMATHERM PIPE INSULATION PRODUCTS PERMATHERM, INC. 269 Industrial Park Road Monticello, GA 31064 (706) 468-7500 www.pipe-insulation.net September 2012 This Specification Guideline in the 3-Part Format
More informationPITTWRAP B100 JACKETING Product Datasheet
PITTWRAP B100 JACKETING Product Datasheet 1. Description and Area of Application PITTWRAP B100 jacketing is a self-sealing, aluminum butyl laminate used for protecting above ground FOAMGLAS insulation
More informationADHESION THICKNESS ELONGATION TAPE NO. DESCRIPTION PRINCIPAL USE
Page 29 SPECIALTY TAPE DIVISION 250 Chester Street Painesville, OH 44077-4129 (866) GO AVERY (440) 639-2600 www.stus.averydennison.com TENSILE ADHESION THICKNESS ELONGATION FL 1000 Single coated 2.0 mil
More informationDATA SHEET A5000 RELEASE FILM
A5000 RELEASE FILM HAWKEYE A5000 RELEASE FILM is a high temperature release film which lends itself readily to overcome bridging in contour layups. With more elongation than the HK3760 or nylon films,
More informationPressure Sensitive Tapes. for Insulation and General Purpose. Innovative Insulation Specialties. Abatement. Industrial. Packaging
Innovative Insulation Specialties Pressure Sensitive Tapes for Insulation and General Purpose Abatement Building & Construction Duct HVAC Industrial Jacketing Systems Masking Mechanical Closure Systems
More informationPERMATHERM, INC. SPECIFICATION FOR COLD/CRYO PIPE INSULATION
PermaTherm, Inc. 269 Industrial Park Road Monticello, GA 31064 (706) 468-7500 www.insulate.pipe.com/ PERMATHERM, INC. SPECIFICATION FOR COLD/CRYO PIPE INSULATION The specification guideline in the three-part
More informationPERMATHERM, INC. SPECIFICATION FOR COLD/CRYO PIPE INSULATION
PermaTherm, Inc. 269 Industrial Park Road Monticello, GA 31064 (706) 468-7500 www.insulatepipe.com PERMATHERM, INC. SPECIFICATION FOR COLD/CRYO PIPE INSULATION The specification guideline in the three-part
More informationP.O. Box : 3876, Umm Al Quwain-U.A.E. Tel.: , Fax:
Tel.: +971 6 74396, Fax: +971 6 74367 Product Aluminum Foil Tapes A dead soft malleable aluminum foil coated with an aggressive Acrylic & Hotmelt adhesive. superior quick stick at normal temperatures with
More informationA. Section Fire Procection, HVAC & Plumbing Penetration Firestopping. B. Section Interior Painting: Painting insulation jacket.
SECTION 230719 - HVAC PIPING INSULATION PART 1 GENERAL 1.1 SECTION INCLUDES A. Piping insulation. B. Jackets and accessories. 1.2 RELATED REQUIREMENTS A. Section 07813 - Fire Procection, HVAC & Plumbing
More informationA8888 RELEASE FABRIC
A8888 RELEASE FABRIC A8888 RELEASE FABRIC is an open weave synthetic polyamide fabric with good hand and drapability, coated with a specially formulated release agent. It has been used on 350 degrees F
More informationProduct Guide Specification
January 2015 Product Guide Specification Specifier Notes: This product guide specification is written according to the Construction Specifications Institute (CSI) 3-Part Format, including MasterFormat,
More informationS OZ. WOVEN POLYETHYLENE F. R. S-3 KLEAR SPAN FR S-6 18 OZ. VINYL COATED POLYESTER (VCP) INNOVATIVE SOLUTIONS PRECISION RELIABILITY
S-2 5.6 OZ. WOVEN POLYETHYLENE F. R. A 1000 denier tape woven into a fabric and coated 2.2 mil on both sides. An economic, light weight yet durable material for industrial applications for indoor use only.
More informationExtreme Sealing Tape
Extreme Sealing Tape Technical Data September, 2014 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.
More informationTAPE SOLUTIONS FOR HVAC SHURTAPE.COM TAPE
TAPE SOLUTIONS FOR HVAC SHURTAPE.COM 1.888.442.TAPE YOU DEMAND FULL SYSTEM CLOSURE. And rely on tape to get the job done quickly and efficiently. That s why we offer a full portfolio of foil, film and
More information3 Adhesive Transfer Tapes with Adhesive PC
3 Adhesive Transfer Tapes with Adhesive 300 9458 9471 9471PC 9472 9653 9671 9672 9673 9674 Technical Data January, 2006 Product Description 3M Adhesive Transfer Tapes with 3M Adhesive 300 offer excellent
More informationPERMATHERM, INC. SPECIFICATION FOR CHILLED WATER PIPE INSULATION
PermaTherm, Inc. 269 Industrial Park Road Monticello, GA 31064 (706) 468-7500 www.insulate.pipe.com/ PERMATHERM, INC. SPECIFICATION FOR CHILLED WATER PIPE INSULATION The specification guideline in the
More informationAdhesive Transfer Tapes with
Adhesive Transfer Tapes with 8132LE 8153LE 9453LE 9471LE 9472LE 9653LE 9671LE 9672LE 9698LE Technical Data April, 2012 Product Description Tapes with 3M provides high bond strength to most surfaces, including
More informationPITTWRAP CF JACKETING Product Datasheet
PITTWRAP CF JACKETING Product Datasheet 1. Description and Area of Application PITTWRAP CF jacketing is a cellulose free fiberglass reinforced vapor retarder insulation jacketing, used for protecting above
More informationDATA SHEET FLASH TAPE 1
FLASH TAPE 1 FLASH TAPE 1 is a general-purpose high temperature, fully cured silicone adhesive tape. Designed for use primarily in plastic and bonding shops for flash control, masking, holding, or positioning.
More informationDATA SHEET FLASH TAPE 1
FLASH TAPE 1 FLASH TAPE 1 is a general-purpose high temperature, fully cured silicone adhesive tape. Designed for use primarily in plastic and bonding shops for flash control, masking, holding, or positioning.
More informationVinaflex Noise Barrier (VN)
Vinaflex Noise Barrier (VN) GLT Products Vinaflex (VN) Noise Barrier is a flexible, non-reinforced mass loaded vinyl that resists the passage of sound waves and reduces the transmission of airborne noise.
More informationPITTWRAP CW PLUS JACKETING Product Datasheet
PITTWRAP CW PLUS JACKETING Product Datasheet 1. Description and Area of Application PITTWRAP CW PLUS jacketing is a 1.27 mm (50 mil) thick self-sealing, modified bituminous membrane for protecting underground
More informationTape No. Description Principal Uses
AVERY DENNISION Specialty Tape Division 250 Chester Street Painesville, OH 44077 Tel: 866.GO.AVERY or 866.462.8379 www.stus.averydennison.com FL 1000 Single coated 2.0 mil foil with 2.2 mils of an acrylic
More informationSECTION PLUMBING INSULATION
SECTION 22 07 00 PLUMBING INSULATION PART 1 - GENERAL 1.1 SUMMARY A. Section includes equipment insulation, covering, and thermal insulation for piping systems including vapor retarders, jackets and accessories.
More informationPITTWRAP HS (HEAT SEAL) JACKETING Product Datasheet
PITTWRAP HS (HEAT SEAL) JACKETING Product Datasheet 1. Description and Area of Application PITTWRAP HS (Heat Seal) jacketing is a heat sealable, multi-ply laminate for protecting underground FOAMGLAS insulation
More information3M Bumpon Protective Products
Technical Data July 2015 3M Bumpon Protective Products Resilient Rollstock - Clear Series SJ5600 Product Description 3M Bumpon Protective Product SJ5600 series are resilient 70 durometer clear polyurethane
More informationK-FLEX. K-FLEX Tapes. for HVAC and industrial application
NAME January PRODUCT 2016 Tapes for HVAC and industrial application TAPES INDEX TAPES Pg. 2 ALU Tapes ALU AA CW TAPE Pg. 4 ALU AR CW TAPE Pg. 5 ALU BLACK CW TAPE Pg. 6 FSK FACING TAPE Pg. 7 Special Tapes
More information3 Adhesive Transfer Tapes with 300 Adhesive PC
3 Adhesive Transfer Tapes with 300 Adhesive 9458 9471 9471PC 9472 9653 9671 9672 9673 9674 Technical Data February, 2002 Product Description 3M Adhesive Transfer Tapes with 300 Adhesive offer excellent
More informationPressure Sensitive Tapes for Industrial Insulation and General Purpose
www.gltproducts.com Pressure Sensitive Tapes for Industrial Insulation and General Purpose Insulation Innovation Abatement Industrial Packaging Building & Construction Duct HVAC Jacketing Systems Masking
More informationDSC BUILDING 1200 ALTERATIONS OCTOBER 2011 SECTION DUCT INSULATION
SECTION 230713 DUCT INSULATION PART 1 GENERAL 1.1 SUMMARY A. Related Sections: 1. 233113 Ductwork and Accessories 1.2 REFERENCES A. American Society for Testing and Materials (ASTM): 1. E84-96a Test Method
More informationBumpon Protective Products
T Resilient Rollstock M 5600!5900!6000!6200 Series Page of 6 Technical Data May, 997 Product Description Bumpon Resilient Rollstock Products are polyurethane sheet materials produced with aggressive pressure
More informationi build with HVAC TAPES
i build with HVAC TAPES HVAC Tape Products Manufactured by IPG in the USA for the HVAC Market Intertape Polymer Group offers a complete line of products specifically engineered to meet the most stringent
More informationA8888 RELEASE FABRIC
A8888 RELEASE FABRIC A8888 RELEASE FABRIC is an open weave synthetic polyamide fabric with good hand and drapability, coated with a specially formulated release agent. It has been used on 350 degrees F
More informationTEKTON Flashings and TEKTON Construction Tape
TEKTON Flashings and TEKTON Construction Tape Complete the system with TEKTON Flashings and Construction Tape. It is important to assure a tight building envelope when windows and siding are installed.
More information4411N 4411G 4412N 4412G
Extreme Sealing Tape Technical Data October, 2011 Product Description 3M Extreme Sealing Tape is a family of single coated, pressure sensitive adhesive tapes designed for difficult sealing applications.
More informationIndustrial Products Catalog
Industrial Products Catalog Table of Contents ABOUT CCT... 1 CCT CAPABILITIES... 2 CARRIER AND FACESTOCK INFORMATION... 3 RELEASE LINER INFORMATION... 4 PRODUCTS Foam Tapes... 5 Single Coated Tapes...
More informationHOLDING CARPETS AND STANDS
Adhesive product needs in this sector is really wide. We have an adhesive solution for each application you need: fixing holding carpets, fixed or removal forex, signs - even lighted and standing high
More informationAir and Vapor Barrier 3015
Air and Vapor Barrier 3015 Technical Data March 2017 Product Description 3M Air and Vapor Barrier 3015 is an air, moisture and water impermeable membrane with an aggressive, high-tack acrylic pressure
More information3M Bumpon Protective Products
Technical Data April 201 Resilient Rollstock - Clear Series SJ5600 Product Description M Bumpon Protective Product SJ5600 series are resilient 70 durometer clear polyurethane rollstock products utilizing
More informationAdhesive Transfer Tapes with Adhesive EK PC
Adhesive Transfer Tapes with Adhesive 300 927 950 950EK 9458 9471 9471PC 9472 9671 9672 9673 9674 1-800-773-0062 www.marianinc.com Technical Data March 2016 Product Description Transfer Tapes with 300
More informationUltra High Bond Tapes...
Ultra High Bond Tapes... Double Coated Acrylic Foam This is a foamed acrylic system with a special composition giving excellent all around bonding properties and unique characteristics that allows for
More information3M Bumpon Protective Products Resilient Rollstock - Clear Series SJ5600
Technical Data January 2017 3M Bumpon Protective Products Resilient Rollstock - Clear Series SJ5600 Product Description 3M Bumpon Protective Product SJ5600 series are resilient clear polyurethane rollstock
More informationFacestock physical properties Imperial Value Units Metric Value Units Caliper: ASTM D inches micron
Product Data Sheet Fasson- Tamperfas- Vinyl/S73/5#SCK ABC Spec#: 4 Facestock 2 Mil Tamperfas- Vinyl is a matte white cast vinyl film designed specifically for security labeling. Care should be taken in
More informationCUSTOM HEALTHCARE SOLUTIONS
CUSTOM HEALTHCARE SOLUTIONS CONVERTING Q.Control T. NO. 39208 120 T rate EXTRUSION 90 60 30 Return G. Control FOAM COATING Overview Corporate Overview Scapa Medical is a fully integrated worldwide supplier
More informationMaxCell Technical Manual. Design Parameters 4G Product Line
MaxCell Technical Manual Design Parameters 4G Product Line 4G Materials of Construction 4G Fabric Warp - Polyester Monofilament Diameter = 0.23 +/- 0.02 mm Denier = 520 +/- 25 Filling - Nylon 6 Monofilament
More informationBAYBLOCK HT/BAYBLOCK HT BASE
Characterization Properties / Applications Bayblock HT is a technologically advanced, high-solids, alkali resistant, thixotropic,acrylic elastomeric coating. Bayblock HT is formulated for the protection
More information3 Aircraft Belly Protective Tape
3 Aircraft Belly Protective Tape 8641 June 2010 Product Description 3M Aircraft Belly Protective Tape 8641 is an exceptionally tough 16-mil thick polyurethane coated with an aggressive, conformable 25-mil
More informationAdhesive Solutions for. Challenging Applications.
Adhesive Solutions for Challenging Applications www.scapana.com Scapa North America specializes in the production of high performance silicone, acrylic and rubber adhesive systems designed to meet the
More informationDouble Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes Technical Data January, 2002 Product Description 4004 1/4 in. (6.4 mm) Double-Coated Urethane Foam Tape 4008 1/8 in. (3.2 mm) Double-Coated Urethane Foam Tape 4016 1/16
More informationTotal Construction Caliper (approximate):
Fasson Tamperfas TM Vinyl/S73/5#SCK ABC Spec#: 4 Facestock 2 Mil Tamperfas TM Vinyl is a matte white cast vinyl film designed specifically for security labeling. Care should be taken in qualifying a particular
More informationPSTC Tape Methods Criteria TENSILE ADHESION THICKNESS ELONGATION TAPE NO. DESCRIPTION PRINCIPAL USE (lbs/in) (oz/in) (mils) (%)
Page 89 16 Richmond Street Clifton, NJ 07015 (973) 772-6262 www.lamartcorp.com 100 1 mil clear polyester film coated on General purpose transparent polyester. 25 35 2.0 100 one side with an acrylic. Used
More informationA. Product Data: Identify thermal conductivity, thickness, and jackets (both factory and field applied, if any), for each type of product indicated.
SECTION 23 07 13 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationAdhesive Transfer Tapes with Adhesive EK
Adhesive Transfer Tapes with Adhesive 300 927 950 950EK 9458 9471 9472 9671 9672 9674 Technical Data December 2017 Product Description Transfer Tapes with 300 offer excellent adhesion to a wide variety
More informationTape No. Description Principal Uses
SPECIALTY TAPES, LLC 4221 Courtney Road Franksville, WI 53126 Tel: 262.835.0748 Fax: 262.835.0749 www.specialtytapes.net mchamberlain@specialtytapes.net DOUBLE COATED AND ADHESIVE TRANSFER TAPES: D620
More informationAffix Technology Sdn. Bhd.
Affix Technology Sdn. Bhd. Double Sided Foam Tapes Double Sided Foam Tape is made out of foam of PE, PU, PVC and EVA coated with various types of adhesive for various applications. This tape is available
More informationAutomotive Product Line Selector
Automotive Product Line Selector Bonding Solutions for Automotive Applications Avery Dennison Performance Tapes pressure-sensitive adhesives and tapes are designed for high-end bonding and mounting applications
More informationA. This Section includes duct and plenum insulation; accessories and attachments; and sealing compounds.
SECTION 230713 DUCT INSULATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
More informationDouble Coated Urethane Foam Tapes
3 Double Coated Urethane Foam Tapes 4004 4008 4016 4026 4032 4052 4056 4085 Technical Data June, 2008 Product Description 3M Double Coated Urethane Foam Tapes are conformable foams that offer high shear
More informationPipe Protection Tape System
Pipe Protection Tape System PASCO All Weather Pipe Protection Tape is a pure physical barrier that is moisture proof, inert and non-conducting. Whether the need is to protect overhead piping in industrial
More information1 of 17. PO Box Bellevue Rd, Newark, DE V F
1 of 17 Raw Material Manufactured from 4 8-foot sheets Fiber-reinforced 1-mil aluminumfaced polyisocyanurate panels 0.032 embossed aluminum Other patterns and stainless steel are available Necessary supplies
More information3M Double Coated Urethane Foam Tape 4016
ASK A 3M EXPERT 3M Double Coated Urethane Tape 4016 Product Description 3M Double Coated Urethane Tapes are conformable foams that o er high shear strength with a high temperature holding acrylic adhesive
More informationEffective Date: Revision #: 1. Section K: Miscellaneous. Casing Insulators/ Stainless Steel. Polyethylene Encasement.
K 1 K 2 K 3 K 4 K 5 K 6 K 7 K 8 K 9 Casing Insulators/ Stainless Steel Polyethylene Encasement Manhole Inserts Pipe Saddle Support/ Valve Vaults/ Adjustable Cylindrical Wall Seals & Line Sleeves Metal
More informationAbout VentureClad Jacketing...
VentureClad About Venture Tape Quality ISO 9001:2008 Status Venture Tape is committed to providing the highest level of customer service. We strive to keep our customers up to date on order status, product
More informationMAKES YOU STRONGER TAPES
MAKES YOU STRONGER TAPES DUCT TAPE THORMAS+ GENERAL PURPOSE DUCT TAPE The THORMAS General Purpose Duct Tape is a multipurpose tape considered as a universal product for sealing, repairing, jointing and
More informationSpecialty Adhesives for Graphic Arts Applications SIGNS FRAMES GRAPHICS DISPLAYS
Specialty Adhesives for Graphic Arts Applications SIGNS FRAMES DISPLAYS GRAPHICS SIGNS GRAPHICS FRAMES DISPLAYS LABELS IMAGE PLAQUES NAMEPLATES S capa North America is a world-class manufacturing operation
More information3M Bumpon Protective Products
Technical Data February 2012 M Bumpon Protective Products Product Description M Bumpon Protective Product series are resilient 70 durometer clear polyurethane rollstock products utilizing an aggressive
More information3 Dual Lock TM. and Scotchmate TM. Reclosable Fasteners. Flame Resistant Products. Technical Data April, 1999
3 Dual Lock TM and Scotchmate TM Technical Data April, 1999 Product Description 3M Dual Lock Fasteners SJ-3860/61/62 and 3M Scotchmate Fasteners SJ-3586/87/18/19 are designed to meet the 60 second vertical
More informationDMS-6300, Waterproofing
Overview (Formerly D-9-6300, Waterproofing). Effective Date: August 1998 - July 2004. This Specification governs the sampling, testing, composition and quality of the waterproofing materials below: butyl
More informationSCOPE OF ACCREDITATIONTO ISO/IEC 17025:2005
SCOPE OF ACCREDITATIONTO ISO/IEC 17025:2005 LYDALL THERMAL / ACOUSTICAL GROUP MATERIAL TESTING LABORATORIES 1241 Buck Shoals Road Hamptonville, NC 27020 Mr. Shane Jolly Phone: 336 468 8598 MECHANICAL Valid
More informationVinaflex Noise Reduction Materials Insulation Innovation
www.gltproducts.com Vinaflex Noise Reduction Materials Insulation Innovation Contents Noise Barrier 1 Reinforced Rolls (RR) 2 Rolls with Foil Facing (FF) 2 Acoustic Foam Laminate (FB) 3 Fiberglass Absorber/Decoupler
More informationVinaflex Noise Reduction Materials Insulation Innovation
www.gltproducts.com Vinaflex Noise Reduction Materials Insulation Innovation Contents Vinaflex Noise Barrier 1 Reinforced Rolls (RR) 2 Rolls with Foil Facing (FF) 2 Acoustic Foam Laminate (FB) 3 Fiberglass
More informationLEED POINT ELIGIBLE, AIRTIGHT GREEN POINT CONTRIBUTORS SHURTAPE.COM TAPE
LEED POINT ELIGIBLE, AIRTIGHT GREEN POINT CONTRIBUTORS SHURTAPE.COM 1.888.442.TAPE THE JOB IS COMPLETE once everything is installed, connected, sealed and tested. When building codes require materials
More information3M Fast Tack Water Based Adhesive 1000NF
Fast Tack Water Based Adhesive Technical Data September 2017 Product Description Key Features 3M Fast Tack Water Based Adhesive is a high performance water-based, one part adhesive formulated for fast
More informationSCOPE OF ACCREDITATIONTO ISO/IEC 17025:2005
SCOPE OF ACCREDITATIONTO ISO/IEC 17025:2005 LYDALL THERMAL / ACOUSTICAL GROUP MATERIAL TESTING LABORATORIES 1241 Buck Shoals Road Hamptonville, NC 27020 Mr. Bill Hammond Phone: 336 355 1507 MECHANICAL
More informationOVERLAMINATES. Product Catalog
OVERLAMINATES Product Catalog STA Corporate Profile Founded in 1976, STA pioneered high quality pressure sensitive tapes. Self wound overlaminating products were introduced to the label industry along
More informationCoating Excellence Material Selection and Lamination Die-Cutting / Converting Technical Support and a Commitment to Quality
CAPABILITIES Coating Excellence Our solvent, hot-melt and aqueous coating technologies offer a wide selection of adhesive solutions to suit your application requirements. Material Selection and Lamination
More information3 Fastbond TM. Insulation Adhesive. Technical Data September, 2010
3 Fastbond TM Technical Data September, 2010 Product Description 3M Fastbond is a water-based, high solids, fast tacking, pressure sensitive adhesive for bonding lightweight materials like fiberglass insulation,
More informationINDUSTRIAL ATTACK 800
! INDUSTRIAL ATTACK 800 SPECIFICATION FOR 1, 1½, 1¾", 2, 2½", & 3 DOUBLE JACKET INDUSTRIAL FIRE HOSE POLYESTER FIBER CONSTRUCTION PLAIN WHITE OUTSIDE JACKET OR ULTRA-SHIELD IMPREGNATED OUTSIDE JACKET EPDM
More informationÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
September 28, 1973 SUPERSEDING Fed. Spec. HH-B-100A November 1, 1967 FEDERAL SPECIFICATION BARRIER MATERIAL VAPOR (FOR PIPE, DUCT AND EQUIPMENT THERMAL, INSULATION) This specification was approved by the
More information3 Scotchmate Reclosable Fasteners
3 Scotchmate Technical Data October, 2002 Product Description 3M Scotchmate offer advanced closure alternatives to zippers, screws, snaps, hooks and more. They offer greater design flexibility, faster
More information3 Adhesive Transfer Tapes with Adhesive 200MP
3 Adhesive Transfer Tapes with Adhesive 200MP Technical Data February, 2002 Product Description 3M Adhesive Transfer Tapes 467MPR and 468MPR with 3M Adhesive 200MP incorporate a polycoated glassine paper
More informationPROJ. NO SECTION HVAC DUCT INSULATION
SECTION 23 07 13 HVAC DUCT INSULATION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationIDENTIFICATION DEPOT, INC. 101 Fairway Drive Washington, NC PHONE FAX
ENGRAVED PLASTIC NAMEPLATES AHU-1 AHU-1 Name tag: White letters / black background Name tag: Black letters / white background Plastic valve tag Applications equipment identification plates warning signs
More informationACOUSTICAL DUCT & PIPE LAGGING INDUSTRIAL NOISE CONTROL PRODUCTS
23 07 13 ACOUSTICAL DUCT & PIPE LAGGING INDUSTRIAL NOISE CONTROL PRODUCTS ACOUSTICAL DUCT AND PIPE LAGGING Acoustical Lagging is wrapped around the outside of duct or pipe to reduce the radiated noise
More information1. Division 23 Section "Hangers and Supports for HVAC Piping and Equipment" for pipe insulation shields and protection saddles.
SECTION 23 07 19 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
More informationHigh Performance Adhesive Transfer Tapes with Adhesive 200MP
3 High Performance Adhesive Transfer Tapes with Adhesive 200MP Technical Data December, 2007 Product Description 3M Adhesive 200MP is a popular choice for graphic attachment and membrane switch applications
More informationAdhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP
Adhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP Technical Data May 2017 Product Description 3M High Performance Acrylic Adhesive
More informationHigh Performance Films
High Performance Films WIDEST RANGE OF HIGH-PERFORMANCE FLUOROPOLYMER FILMS IN THE INDUSTRY As the fluoropolymer experts, TCI offers a vast knowledge of diverse fluoropolymer technologies and superior
More informationHigh Performance Adhesive Transfer Tapes with Adhesive 200MP 467MP 468MP 467MPF 468MPF 7952MP 7955MP 7962MP 7965MP 9172MP 9185MP 9667MP 9668MP
High Performance Adhesive Transfer Tapes with Adhesive 200MP Technical Data January, 2012 Product Description 3M Adhesive 200MP is a popular choice for graphic attachment and membrane switch applications
More information3M Electrically Conductive Adhesive Transfer Tape 9707
Technical Data May 2014 3M Electrically Conductive Adhesive Transfer Tape 9707 Product Description 3M Electrically Conductive Adhesive Transfer Tape (ECATT) 9707 is a pressure sensitive adhesive (PSA)
More informationMultijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing
www.swagelok.com Multijacketed Tubing, Single-Jacketed Tubing, and Insulated Tubing Features 1/4 to in. and 6 to 12 tubing sizes available in 316/316L stainless steel and copper Seamless and welded tubing
More information3M Electromagnetic Compatible Products
3M Electromagnetic Compatible Products 3Innovation Faster, smaller, lighter, easier the skyrocketing development of today s electronics requires new solutions for significant new problems. These solutions
More informationGUIDE SPECIFICATION: MECHANICAL SYSTEMS
GUIDE SPECIFICATION: MECHANICAL SYSTEMS This specification guide includes thermal & acoustical insulation for piping, equipment, vessels, and air handling systems. This section is based on the format recommended
More informationD. Provide UL-approved assemblies for pipes and ducts passing through fire-rated floors, walls, or partitions as required.
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
More informationHeat Curing Application Methods. Fastelek Temp. Optimal Heating Temp o F to 270 o F 3 ~ 10 seconds 6 ~ 8 seconds 20 ~ 30 seconds
Fastelek is a customizable heat activated electrically conductive adhesive available in a few performance fillers, thicknesses and phase-change (melt point) temperatures. Fastelek is designed to adhere
More information