WPE - Go4Cement Wear protection systems
|
|
- Brett Waters
- 5 years ago
- Views:
Transcription
1 WPE - Go4Cement Wear protection systems GmbH Technology from Germany
2 WPE Diamond in the cement industry Not dispense you to: More than 20 years experience in the repair and maintenance of wear-resistant linings in the cement industry. On an installation specialists who also is developer and manufacturer of wear protection products. An engineering partner with his experienced suppervisors who will support you Worldwide at your repairs and maintenance work. Benefits of WPE Diamond: Rapid availability By flexible layer thickness WPE Diamond adapts to any existing ceramic lining. Is laid without joints Can be loaded after 24 hours Thermal shock resistant Can be used up to 1200 C High wear resistance Good corrosion resistance We have wear protection solutions for every budget.
3
4 Raw meal preparation WPE Diamond WPE Cast basalt WPE Aluminaoxide ceramic WPE Hard metal WPE Hard overlaid welds WPE Ziconia oxide ceramic Clinker preparation WPE Diamond WPE Cast basalt WPE Aluminaoxide ceramic WPE Hard metal WPE Hard overlaid welds WPE Ziconia oxide ceramic WPE Refractory WPE ThermCombi Cement preparation WPE Diamond WPE Cast basalt WPE Aluminaoxide ceramic WPE Hard metal WPE Hard overlaid welds WPE Ziconia oxide ceramic Slag handling WPE Diamond WPE Cast basalt WPE Aluminaoxide ceramic WPE Hard metal WPE Hard overlaid welds WPE Ziconia oxide ceramic WPE Silicon carbide WPE ThermCombi Raw material bins Silos Chutes Chain conveyor Vertical roller mill Ball mill feed Dynamic separator Separator distribution plate Product outlets Cyclones Feed for vertical roller mill Preheater top cyclone Clinker cooler Clinker crusher Clinker Cooler Dedusting Cyclones Tertiary air duct Chutes Chainconveyor Coal mill separator Pneumatic Transport Static preseparator Chutes Pneumatic Transport Vertical Roller Mill Separator Vertical Mill Feed Fines outlet Fall-through outlet Ball Mill Feed Mill Cyclones Dynamic cement separator Static pre-separator Chutes Flash dryer Vertical roller mill Ball Mill Separator Cyclones Pneumatic transport Pneumatic meal transport Raw meal silo Preheater silo Kiln inlet
5 Vertical Roller Mills for Cement/GBFS Fuller-Loesche Gebr. Pfeiffer Fines outlet / Fall-through chute Duct between mill and cyclones/filter Fines outlet / Fall-through chute FLSmidth Atox Fines outlet / Fall-through chute FLSmidth OK Mill Loesche Polysius Fines outlet / Fall-through chute Duct between separator and cyclone Feed chutes Fines outlet / Fall-through chute Feed chutes Fines outlet / Fall-through chute Claudius Peters Babcock/HITACHI ALSTOM Loesche Vertical Mills for Coal Fines outlet Fines outlet Feed chutes Fines outlet Fines outlet Feed chutes
6 WPE Diamond WPE Diamond is an extremely dense material, consisting of a cement, in combination with special Mikrosilika and superplasticizer. Through its high-density, nonporous structure a extreme compressive strength can be generated. An advantage of this dense structure is that no corrosive material can penetrate through pores which makes to a very good corrosion protection material. With the WPE Diamond binder and an admixture of extremely hard and heatresistantceramics such as bauxite, corundum and silicon carbide WPE Diamond is a wear protection material with excellent features. WPE Diamond Cast is a castable version. This version can be used in combination with quarz, bauxite, corundum or silicon cabide. WPE Diamond Cast is temperature resistant up to 840 F. ast C WPE Diamond Cast HT is a high temperature castable version. This version can be used in combination with bauxite, corundum or silicon cabide are delivered. WPE Diamond Cast HT is temperature resistant up to 2100 F. C HT ast WPE Diamond Spray is a sprayable version. This version can be used in combination with quarz, bauxite, corundum and silicon carbide. WPE Diamond Spray is temperature resistant up to 840 F. Spray WPE Diamond Flex is a mortar version. This version can be used in combination with quarz, bauxite, corundum or silicon carbide. WPE Diamond Flex is temperature resistant up to 840 F. Flex WPE Diamond Flex HT is a mortar version. This version can be delivered in combination with bauxite, corundum or silicon carbide. WPE Diamond Flex HT is temperature resistant up to 2100 F. HT Flex
7
8 WPE Diamond Physical properties Flex ast C HT C ast F HT lex Product description Flex = Mortar Cast= Castable HT = High Temperature Diamond Flex 1000 Diamond Cast 2000 Diamond Flex 2000 Diamond Cast 2000HT Diamond Flex 2000HT Diamond Flex 3000 Density kg/m Hardness Mohs Compressive strength Mpa Flexural strength Mpa Max. process temperature C Standard lining areas are: Silos Hoppers Chutes Slag granulation systems Separator Cyclone Grinding systems Dedusting systems Slurry systems Tanks Chutes Pneumatic transport pipelines Installation of WPE Diamond WPE Diamond is a two compound material (binder + ceramic aggregates). Both products plus water must mixed in a pan-pot-mixer according to the WPE installation manual. WPE Diamond can installed on metallic or on concrete surface with a expanded mesh as a anchor system. After 48 hours curing time the lined area is ready for use. Advantages: high wear resistant good corrosion resistance flexible in layer thickness overhead installation is possible thermoshock resistant jointless lining
9
10 More WPE wear products Application areas Standards Installation method Technical data WPE Cast basalt Areas with strong abrasive wear Service temperature max. 350 C Rectangular tiles, 200 mm, hex. Tiles (with 200 mm), thickness 30 mm, radial tiles, cylinders DN , thickness mm Installation in mortar, epoxy, adhesives, bolding Density: 2,8 2,9 g/cm³ Porosity: 0-3 % Hardness Mohs: 8 Compressive strength: MPa Flexural strength: 40 MPa WPE Alumina ceramic Areas with strong abrasive and impact wear Service temperature max C Tiles mm side length, thickness 6 50 mm, with/without centre hole, mosaic tiles 20x20 and 25x25 mm, thickness 4 10 mm, cylinders DN Installation in mortar, adhesives, silicon, bolding, welding Density: 3,4 3,6 g/cm³ Porosity: 0 Hardness Mohs: 9 Compressive strength: 3000 MPa Flexural strength: MPa WPE Silicon carbide Areas with strong abrasive and impact wear and High service temperature max C Standard tiles square/rectangular, thickness mm, cylinders DN , with wall thickness of 20 mm Installation in mortar, adhesives, silicon, bolding, welding Density: 3,01 g/cm³ Porosity: 0 Hardness Mohs: 9 Compressive strength: 2500 MPa Flexural strength: 100 MPa WPE Hard faced welded steel Areas with strong abrasive and impact wear Service temperature max. 500 C Plates: 2900 x 1800 mm 2900 x 1350 mm 1900 x 850 mm 900 x 850 mm Pipes with inside welding DN 100 DN 450 Bolding, welding, mechanical fixing systems Hardness: HRC Basic/Overlay: WPE Wear compound Areas with medium abrasive wear Service temperature max. 80 C Boxes 0,5 kg Boxes 5 kg Casting or troweling Density: 2,2 g/cm³ Porosity: 0 Compressive strength: 90 MPa WPE Zirconiaoxide ceramic Areas with strong abrasive and impact wear and High service temperature max C Standard tiles square/rectangular, thickness mm, cylinders DN , with wall thickness of 25 mm Installation in mortar, adhesives, silicon, bolding, welding Density: 3,4 g/cm³ Porosity: 0 3 % Hardness Mohs: 9 Compressive strength: 400 MPa Flexural strength: MPa
11
12 WPE Installation and repair service Go4Cement e nicht auf: We install on site in Europe in cement plants, power plants and steel mills ceramic wear protection with our own fitters. Our workshop manufactures new bumpered ceramic wear protection of steel components according to customer specifications. You can also deliver us your worn steel parts for repair. WPE Go4Cement EN 10/2015 Wear Protection Engineering GmbH Nordring 1 D Rheinberg fon: (0) fax : (0) info@wpe-gmbh.de
WPE Technical Newsletter
May 2, 2016 Special Edition Theme UHPC Ultra High Performance Concrete as wear protection in the cement industry WPE Technical Newsletter WPE Newsletter report on UHPC products and their applications in
More informationEconomic Wear Protection in Coal fired Power Plants Worldwide
Issue 03.06 Economic Wear Protection in Coal fired Power Plants Worldwide www.kalenborn.de A typical application in power plants is pulverized fuel piping, here protected by ABRESIST Reduce Costs and Avoid
More informationFor over 30 years, CeraWear Systems has been successfully producing and distributing technical ceramics for the most varied applications.
CERAWEAR Systems Your competent partner for industrial wear and corrosion protection solutions. Individual and competent development, production and installation of wear protection systems made of high-performance
More informationSolutions for Wear Protection in Power Plants
Solutions for Wear Protection in Power Plants 1 Reduce Costs and Avoid Downtime Kalenborn offers a complete array of wear protection materials Pipes, Components and Service Optimal solutions for every
More informationEconomic Wear Protection For the Iron and Steel Industry Worldwide
Issue 07.06 www.kalenborn.de Economic Wear Protection For the Iron and Steel Industry Worldwide Reduce Costs and Avoid Downtime Large quantities of bulk material are handled in the conveying and storing
More information800.764.0080 FABRICATED COMPONENTS CHUTES / HOPPERS SCREWS / TROUGHS PATENTED BURNER NOZZLE LININGS U.S. Patent # 8,210,111 B2 FABRICATED COMPONENTS ELBOWS / PIPING EXHAUSTER FANS Dynamic Balancing Available
More informationCeramite trowellable BKR-F and Ceramite T
Ceramite trowellable BKR-F and Ceramite T Hopper lining with Ceramite in South Africa Possible applications for trowellable BKR-F Cosmos Cement USA, Raw mill feeder Cimentaria Nationale, Lebanon, lining
More informationDensit Wear Protection Products
Densit Wear Protection Products densit aps densit WEAR protection solutions Densit Services Densit ApS specializes in the development, production and delivery of high-performance solutions for industrial
More informationBMW. Alumina92. Alumina Ceramic Division. An ISO Company
BMW Alumina Ceramic Division Alumina92 An ISO 9001-2008 Company About US Fiction, wear, and erosion are major issues, resulting in major costs to businesses operating in the Power Generation, Cement Plants,
More informationHardfacing Wear Plates
Kobatek ABRAMAX Hardfacing Wear Plates PROTECTIVE MAINTENANCE TECHNOLOGY Kobatek ABRAMAX Wear Plates Wear Plates is the general name given to a low carbon steel which coated on the surface with high abrasive
More information// WEAR PROTECTION PRODUCTS
// WEAR PROTECTION PRODUCTS // TUBES AND ELBOWS WITH CERAMIC PROTECTION FOR PNEUMATIC TRANSPORT // CERAMIC LINING FOR LARGE SURFACE CONVEYOR NOZZLE Conveyor nozzles are used to accelerate transport with
More informationSteels Ltd. Cast Basalt Division BASALT450. An ISO Company
BMW Steels Ltd Cast Basalt Division TM BASALT450 An ISO 9001-2008 Company Company Profile BMW Steels Ltd was formed in 1962 as a one stop shop have been proved second to none in the industry. for wear
More informationGTV Engineering Limited
GTV Engineering Limited Individual fabrications upto complete plant FABRICATION MACHINING HARDFACING W E A R P R O D U C T S & S E R V I C E S D I V I S I O N Fighting wear...with a difference Our cladding
More informationCC-1004 Ultra High Temperature Epoxy Adhesive
CC-1004 Ultra High Temperature Epoxy Adhesive PRODUCT DESCRIPTION TYPICAL USES Blome CC-1004 is a two part, high temperature, epoxy adhesive used for the installation of abrasion resistant brick and tile
More informationCapacity Enhancement and Energy Conservation in Cement Plant
Capacity Enhancement and Energy Conservation in Cement Plant V.K. Batra*, P.N. Chhangani**, Dinesh Satija*** and R. B. Garg**** Holtec Consulting Private Limited, Gurgaon ABSTRACT The cement industry continues
More informationWelding Alloys Group. WA Hardlite Ultra-thin composite wearplates
Welding Alloys Group WA Hardlite Ultra-thin composite wearplates Success through innovation This brochure presents the features of composite Hardlite wear plate, from the manufacturing process, the wear
More informationThe raw materials. Clay (or fly ash, slate, sand**) *) Limestone is sometimes exchanged with shells or chalk **) Fly ash, shiffer, sand
Cement Industry This presentation contains general suggestions. SSAB hereby expressly disclaims any liability for their suitability for individual applications. It is the responsibility of the user of
More informationFLUIDCON. Pneumatic conveying with FLUIDCON Operating experience and results by Claudius Peters
Pneumatic conveying with Operating experience and results by Claudius Peters The Problem Raw Meal from Silo to Preheater Tower Raw meal silo Solution A: Bucket elevator & air slide Preheater tower Solution
More informationLOESCHE METHOD FOR MANUFACTURING ULTRA-FINE BLAST FURNACE SLAG
LOESCHE ETHOD FOR ANUFACTURING ULTRA-FINE BLAST FURNACE SLAG Blast furnace slag grain with reaction seam of CSH phases (taken by B. öser, Bauhaus University, Weimar, FIB) Dr. Holger Wulfert, Dr. Winfried
More informationAbout IESPL : Improve Engineering System Pvt. Ltd. Offers Total Trunkey Solution in the field of Ash Handling and Coal Based Power Plant.
IMPROVE ENGINEERING More SYSTEMS Then Conveying. PVT. LTD More Then Conveying. About IESPL : Improve Engineering System Pvt. Ltd. Offers Total Trunkey Solution in the field of Ash Handling and Coal Based
More informationGLASS INDUSTRY REFRACTORY & LINING PRODUCTS FOR HIGH TEMPERATURE APPLICATIONS
GLASS INDUSTRY REFRACTORY & LINING PRODUCTS FOR HIGH TEMPERATURE APPLICATIONS PRESENTATION BELREF REFRACTORIES operates out of Saint-Ghislain (Mons - Belgium) and is a world player in the supply of refractory
More informationCIMENT FONDU. Special cement for concrete and mortar solutions
Special cement for concrete and mortar solutions >> Rapid return to service Rapid hardening: more than 25 MPa in 6 hours Ciment Fondu mortars and concretes are very rapid hardening, with a setting time
More informationINDUSTRIAL ACCESSORIES COMPANY
INDUSTRIAL ACCESSORIES COMPANY Industrial Accessories Company is an industrial design/build and original equipment manufacturer of baghouses, flue gas desulfurization, heavy metal mitigating sorbent injection
More informationThe generic requirements from blast furnace refractories are summarised below:
BLAST FURNACE In the blast furnace iron ore is melted and reduced by coke and limestone. The materials are charged from the furnace top to form layers. Hot blast blown from furnace bottom burns coke and
More informationREFRACTORY PRODUCTS. This product catalogue is compacted for electronical submission without references and illustrations for typical applications.
REFRACTORY PRODUCTS We appreciate the opportunity to present our product catalogue for refractory materials. The catalogue includes typical often used materials for different applications of industrial
More informationBharat Heavy Electricals Limited Ceramic Business Unit
Bharat Heavy Electricals Limited Ceramic Business Unit If wear is your problem BHEL has the solution... CERALIN FOR A TROUBLE FREE TOMORROW The Company Bharat Heavy Electricals Limited is the largest Engineering
More informationThyssenKrupp Industrial Solutions. Our new name is. POLYCOM high-pressure grinding roll.
Our new name is ThyssenKrupp Industrial Solutions www.thyssenkrupp-industrial-solutions.com POLYCOM high-pressure grinding roll Polysius 2 POLYCOM high-pressure grinding roll The reliable and energy-saving
More informationSHANDONG QISHUAI WEAR RESISTANT EQUIPEMNT CO.,LTD
SHANDONG QISHUAI WEAR RESISTANT EQUIPEMNT CO.,LTD T:8618766918053(whatsapp) email:florahu@zbqishuai.cn Skype:florahu11 Web:www.sdqishuai.com Website on alibaba.com: zbqishuai.en.alibaba.com ADD:Dufudian,zhutai,linzi
More informationENDURACLAD INTERNATIONAL PTY LTD. Head Office: 41 Roscoe Street, Henderson WA Phone: (08)
ENDURACLAD INTERNATIONAL PTY LTD Head Office: 41 Roscoe Street, Henderson WA 6166 Phone: (08) 9437 4506 E-mail: sales@enduraclad.com.au j Where Quality follows Integrity ENDURACLAD INTERNATIONAL PTY LTD
More informationConveyor Chains for the Cement Industry
Conveyor Chains for the Cement Industry in Partnership with Cement Makers Company history The Company was founded more than 70 years ago and is now one of the world s leading chain manufacturers. s know-how
More informationOur products have been developed for the special operating. Our services. Our solutions
in cement industry A d va n c e d refractories technology Our products have been developed for the special operating conditions required in the cement manufacturing process. Nowadays, more and more alternative
More informationOK raw mill Reliable and efficient raw material grinding
raw mill Reliable and efficient raw material grinding WE DISCOVER POTENTIAL Based on proven technology The raw mill is designed with the same proven technology and modular design as our standard cement
More informationData Sheet 3115 Englisch
Englisch Floor Leveling Compound 3115 Fußboden-Nivelliermasse 3115 Very low-emission, self-leveling, high-strength, low-tension, for interior use, with Perimeter Insulation Strip SK 3018 Properties High-strength,
More informationPOLYCOM high-pressure grinding roll.
POLYCOM high-pressure grinding roll. POLYCOM high-pressure grinding roll the proven, energy-saving grinding system. Outstanding results are obtained with the high-pressure grinding roll for the comminution
More informationPart of the Sikaplan WT Membrane System
System Product Data Sheet Edition: 10.2011 Identification no: 02 07 03 02 System Sikaplan WT Tape 200 System Part of the Sikaplan WT Membrane System Product Description Sikaplan WT Tape 200 is a high performance
More informationMonolithic linings of cement kilns under conditions of combustion of alternative fuels. Annotation
Monolithic linings of cement kilns under conditions of combustion of alternative fuels Ing. Milan Henek,CSc 1, Ing. Zoltán Horváth 2, Ing. Anton Adamovič 2, Ing. Vlastimil Kocman 1 1 Průmyslová keramika,
More informationSpeical, substrate-tolerant primer
Speical, substrate-tolerant primer Availability Quantity per pallet 120 Packaging unit 2,5 kg 10 kg 25 kg Type of container Tin bucket Tin bucket Container code 03 11 26 Art. no. 0916 6364 See application
More informationCeraSurf. Wear-Resistant Ceramic Components
CeraSurf Wear-Resistant Ceramic Components CERASURF WEAR MATERIALS CERASURF WEAR RESISTANT CERAMICS CoorsTek h been producing ceramic materials for over 100 years. We have the knowledge, capabilities,
More informationRefractory concrete Products and service REFRATECHNIK
Refractory concrete Products and service REFRATECHNIK REFRA concretes and full service by Refratechnik In our constant efforts to intensify customer service and improve our products, Refratechnik has developed
More informationSalient Futures of Ramasamy Raja Nagar Unit
P.M.RAMASUBRAMANIAN V.SURESH S.MUTHUKUMAR GM Process & QC AGM - Process Dy.Manager - Mech Salient Futures of Ramasamy Raja Nagar Unit A flagship company of RAMCO Group, having five Cement manufacturing
More informationin iron-making industry
in iron-making industry B l a s t furnace lining engineering The crucial reason for iron-makers to pursue as long a blast furnace life campaign as possible is the high cost of relining. While the hearth
More informationHX900 cast-in-carbide
HX900 cast-in-carbide Cast-in-carbide for the toughest conditions HX900 is a unique wear material combining the wear resistance of cemented carbide with the shock resistance, ductility and forming capability
More informationRefractory Lining and Wear in the TORPEDO LADLE
Refractory Lining and Wear in the TORPEDO LADLE Dr. Waltraud Winkler, Linz Seminar: Refractory Technology Applications, Wear Mechanism, Failures Steel Academy Steel Institute VDEh PO box 104842 40039 Düsseldorf
More informationPicture: Loesche GmbH, Germany. CEMENT SikaGrind FOR VERTICAL ROLLER MILLS
Picture: Loesche GmbH, Germany SikaGrind FOR VERTICAL ROLLER MILLS FOR VERTICAL ROLLER MILLS In a ball mill, the particles are ground by repeated impact forces. The material needs usually more than 20
More informationCorrosion protection for Flue Gas Desulphurisation Plants
Corrosion protection for Flue Gas Desulphurisation Plants REMA TIP TOP lining systems for FGD Plants The reliable solution As a result of increasing environmental protection regulations, Flue Gas Desulphurisation
More informationMSE 351 Engineering Ceramics I
Kwame Nkrumah University of Science & Technology, Kumasi, Ghana MSE 351 Engineering Ceramics I Ing. Anthony Andrews (PhD) Department of Materials Engineering Faculty of Mechanical and Chemical Engineering
More informationWhite Fused Alumina. Specifications: Best Coarse Coarse Normal part Mixed part 100%pass these mesh NO. Grain size. Fine part.
28 Charlton Street, Mt. Warrigal. NSW. 2528. Australia. Phone: 0242 956915 Mobile: 0450 695691 e mail: john.pulbrook@bigpond.com Skype: johnpulbrook1 ABN 17 949 415 002 Our products include White Fused
More informationBlockages in Cement Storage Silos
Blockages in Cement Storage Silos Loh Han Sen Territory Sales Manager AFCM 2015 Hanoi, April 21st to 24th, 2015 More than a 100 years of experience Efficient silo conception Storage capacity from 1.000m³
More informationOptimized crusher selection for the cement industry
Optimized crusher selection for the cement industry - Technical Paper for - APCAC, XXVI Technical Congress, September 7 th -10 th, 2009 Bogota Colombia By Jürgen Muckermann ThyssenKrupp Fördertechnik GmbH,
More informationHIGH PERFORMANCE REFRACTORIES.
2018 Specialty Aluminas FOR HIGH PERFORMANCE REFRACTORIES www.alteo-alumina.com Aluminas for refractories Alumina is one of the most common oxides used in refractory applications. ln a typical refractory,
More informationSHARADAA CEMENT & DRI SPONGE IRON INDUSTRIES CASTABLES AND REFRACTORIES FOR
SHARADAA CASTABLES AND REFRACTORIES FOR CEMENT & DRI SONGE IRON INDUSTRIES KILN COOLER REHEATER CYCLONE LOW CEMENT / ULTRA LOW CEMENT CASTABLES GEL BONDED NO CEMENT CASTABLES HIGH ERFORMANCE REAIR CASTABLES
More informationPlastCoat PC 25/ PC 35
PlastCoat PC 25/ PC 35 The powerful ones Plaster spraying indoors and out with equipment geared to practical use. Quality Offensive! With their plaster spraying units WAGNGER have made it easier to get
More informationTechnical Data Sheet StoCrete TS 100
Mineral dry spray mortar, layer thickness 6 50 mm Characteristics Functionality Properties As a concrete substitute for repairing statically and non-statically relevant concrete loadbearing structures
More informationIMI Annual Meeting Steve Young Territory Sales Engineer
IMI Annual Meeting Steve Young Territory Sales Engineer Steve.Young@Henkel.com 317.832.9264 Mining Process Basic Mining Flow 1) Extraction 2) Crushing 3) Milling 5) Hydrocyclone 8) Filtering 4) Screening
More information2013 Product Catalogue
2013 Product Catalogue We Change Chemistry Of The Structure. The quality of the materials used in building and construction areas are also increasing and as a result, lifting our standarts of living to
More information2-part epoxy primer, levelling mortar, intermediate layer and mortar screed
Construction Product Data Sheet Edition 21/11/2016 Identification no: 02 08 01 02 007 0 000004 Sikafloor -161 Sikafloor -161 2-part epoxy primer, levelling mortar, intermediate layer and mortar screed
More informationCATALOGUE OF OUR PRODUCTS CONTENT... 1 REFRACTORY CASTABLES... 2 RAMMING MIXES AND MOULDABLES INSULATING REFRACTORY CASTABLES...
CATALOGUE OF OUR PRODUCTS CONTENT... 1 REFRACTORY CASTABLES... 2 RAMMING MIXES AND MOULDABLES... 11 INSULATING REFRACTORY CASTABLES... 17 REFRACTORY GUNNING MIX... 20 ASBESTOS-FREE COATING... 23 REFRACTORY
More informationWaterproofing Systems
Waterproofing Systems The House of Scandinavian Finishing Materials Waterproofing Systems Introduction Established in Sweden in 1980, Terraco continues its proud tradition of producing environmentally
More informationOK mill The most reliable and efficient mill for raw and cement grinding
mill The most reliable and efficient mill for raw and cement grinding WE DISCOVER POTENTIAL Based on proven technology FLSmidth has supplied the global cement industry with leading Vertical Roller Mill
More informationConcrete Technology. 1- Neville, AM and Brooks J.J." Concrete Technology" Second Edition, 2010.
Syllabus. Introduction 2. Cement 3. Aggregate 4. Fresh Concrete 5. Strength of Concrete 6. Elasticity, Shrinkage and Creep 7. Concrete Durability 8. Concrete Mix Design 9. Special Concretes Text Book -
More informationDALMIA SEVEN understands your specific requirements and serves them innovatively with the most advanced technology.
in cement industry A d va n c e d refractories technology DALMIA SEVEN is not only a new name, but a new promise: to bring tradition and innovation together for the purpose of serving the Indian market
More informationPM-TECHNOLOGIES. FINEST SOLUTIONS Unique technologies for kiln plant, raw meal and cement grinding! Josef Keuschnigg
PM-TECHNOLOGIES FINEST SOLUTIONS Unique technologies for kiln plant, raw meal and cement grinding! Josef Keuschnigg RE-ENGINEERING THE KILN PLANT BOTTLENECK ANALYSIS When re-engineering the kiln plant,
More informationVertical Roller Mill
Vertical Roller Mill Introduction The Vertical roller mill produced by our company is devoted to the resolve of energy-consumption in the industrial grinding mill. And after years designing and development,
More informationPlastCoat PC 15. The compact one. Interior and exterior plaster spraying with easy to use technology.
PlastCoat PC 15 The compact one Interior and exterior plaster spraying with easy to use technology. With their plaster spraying units Wagner have made it easier to get into the machine-assisted application
More informationMake your floor a unique artwork!
Make your floor a unique artwork! Content: Floor Expert EP 101... 08 Floor Expert EP 1013... 09 Floor Expert EP 310W... 10 Floor Expert EP 311...11 Floor Expert EP 211... 12 Floor Expert EP Combines design
More informationAVM Ceramics. Metallurgy Paper & Pulp Thermal
AVM Ceramics Metallurgy Paper & Pulp Thermal AVM Ceramics AVM Ceramics GmbH (Advanced Versatile Materials) The demands on an increasing technological advancement in material products worldwide dictates
More informationPROTECTIVE COATINGS 1. KOROGUARD. Technical Details. Salient Features. Application Area
PROTECTIVE COATINGS 1. KOROGUARD A specially developed 100% solid epoxy based high performance anti-corrosive coating with excellent chemical, acid and alkali resistance. 100% solids High Build system
More informationTECHNICAL SPECIFICATION DANTECO HERMANNS. CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device
TECHNICAL SPECIFICATION DANTECO HERMANNS CONTAINER FOR BULK POWDER Equipped with HERMANNS Aeration and Conveyance Device 6058(20') x 2438(8') x 2591(8'6") MODEL NO. : CX09-20SNX1 SPEC. NO : CX09-20SNX1-S3
More informationDEVCON MAINTENANCE, REPAIR AND OVERHAUL SYSTEMS
DEVCON MAINTENANCE, REPAIR AND OVERHAUL SYSTEMS Maintenance, Repair and Overhaul Systems 2-3 DEVCON MAINTENANCE, REPAIR AND OVERHAUL SYSTEMS Devcon products are the result of 50 years experience, all developed
More informationCERAMIC SURFACING POLYMERS
CERAMIC SURFACING POLYMERS INDUSTRIES WATER / WASTE WATER MeCaTec can prolong the service life of components in a wide array of industries. Piping systems Digester tanks Clarifiers Manholes Lift stations
More informationEPILOX EPOXY BINDER TECHNICAL DATA SHEET. Multi-purpose High Performance Epoxy Binder System DESCRIPTION FEATURES AND BENEFITS
EPILOX EPOXY BINDER Multi-purpose High Performance Epoxy Binder System DESCRIPTION Aftek Epilox Epoxy Binder is a two part solvent free epoxy resin binder system for combining with selected fillers and
More informationI. Materials Properties and Cathode Construction 1 INTRODUCTION 1 THE CARBON LINING 4
Table of Contents Table of Contents I. Materials Properties and Cathode Construction 1 I. Materials Properties and Cathode Construction 1 INTRODUCTION 1 INTRODUCTION 1 THE CARBON LINING 4 THE CARBON LINING..
More informationSikafloor -161 is an economic, two part, solvent free, low viscosity epoxy resin, suitable for use under hot climate condition.
Product Data Sheet Edition 05.08 Identification no: Provisional Sikafloor -161 2-part epoxy primer, levelling mortar, intermediate layer and mortar screed Construction Product Description Sikafloor -161
More informationRaicon Labs Pvt. Ltd., Plot No. 140, HSIIDC, Rai Industrial Area, Sonepat, Haryana. Discipline Mechanical Testing Issue Date
Last Amended on - Page 1 of 9 I. BUILDING MATERIALS 1. Cement Fineness by Blain Air Permeability IS 4031 (Part 2): 1999 (RA 2013) 100 m 2/ kg to 500 m 2/ kg Consistency IS 4031 (Part 4): 1988 (RA 2014)
More informationData Sheet 3550 Englisch
Data Sheet 3550 Englisch ETICS Powder Adhesive 3550 WDVS Pulverkleber 3550 mineral adhesive and reinforcing plaster for Brillux ETICS Systems I through VI Properties Mineral adhesive and reinforcing powder.
More informationFLOW-BOW - THE STRONG DEFLECTOR ELBOW
FLOW-BOW - THE STRONG DEFLECTOR ELBOW TO DEFLECT ABRASIVE BULK MATERIALS IN DENSE, PHASE MATERIAL CONVEYING PIPELINES Optimal conduction of flow, wall thickness design and high-strength spheroidal cast
More informationBulk solids measurement for high throughput rates
Bulk solids measurement for high throughput rates "Supplying intelligent measuring systems for industry since 1995" Development + Production + Sales + Commissioning + After-Sales erv ie w ov app lica tion
More informationFangYuan Group LTD. The World s Leader in Refractory Materials. Blast Furnace Lining Products
FangYuan Group LTD The World s Leader in Refractory Materials. Blast Furnace Lining Products Edition 2008 INTRODUCTION We have successfully served over 500 blast furnace lining installations and over 300
More informationAUMUND completes Modernisation of the Handling and Storage Systems at OAO Mordovcement
AUMUND completes Modernisation of the Handling and Storage Systems at OAO Mordovcement AUMUND have good reasons to be proud of the opportunity provided by OAO Mordovcement to take part in the large-scale
More informationADVANCED REINFORCED COATINGS CATALOG
ADVANCED REINFORCED COATINGS CATALOG TABLE OF CONTENTS SECTION 1 - OVERVIEW Chesterton...4 ARC...5 ARC Composites...6-7 SECTION 2 - EROSION/CORROSION-RESISTANT COATINGS 855... 10 PW...11 CRC... 12 858...
More informationSelf-leveling epoxy coating
IN COMPLIANCE WITH EUROPEAN STANDARD PRINCIPLES PI-MC-PR-IR SURFACE PROTECTION SYSTEMS FOR CONCRETE Mapefloor SL SR SYNTHETIC RESINS B2,0 AR0.5-IR4-Bfl-s1 Self-leveling epoxy coating IN COMPLIANCE WITH
More informationSELECTION CHART OF REPAIR AND SMOOTHING MORTARS
SELECTION CHART OF REPAIR AND SMOOTHING MORTARS MAPEI MORTARS FOR REPAIRING CONCRETE REPAIRING CONCRETE WITH SHRINKAGE-COMPENSATED MORTARS Mapegrout T40: Medium-strength (40 MPa) thixotropic mortar for
More informationSteel Casting & Wear Resistant Material
Steel Casting & Wear Resistant Material INTERSCAN One Stop Industrial Solutions! About Interscan INTERSCAN was established by Mr. Tauqeer Ahmed in 1993, the company was committed to deliver clients the
More informationTYPICAL PHYSICAL STRENGTH PROPERTIES OF PRO TILE
TYPICAL PHYSICAL STRENGTH PROPERTIES OF PRO TILE The following results of eight different tests show the typical physical strength properties of Pro Tile. IMPACT STRENGTH Date: September 19, 1983 cement
More informationCOROPLATE Composite wear plates Protects equipment, reduces costs.
Your partner in steel COROPLATE Composite wear plates Protects equipment, reduces costs. Wear protection in metallurgy chutes, separators, bunkers, blast furnace bells, rotary chutes, blast furnace armor
More informationPRODUCT LIST (REFRACTORIES)
PRODUCT LIST (REFRACTORIES) For IRON & STEEL INDUSTRY Coke Oven Silica Bricks Mullite, Mullite-silicon Carbide Bricks for Dry Quenching Fire Clay Bricks Hot Blast Stove Silimanite-Mullite & Andalusite
More informationStudy of the applicability of the concrete protection method by sulfuric acid-proof mortar
Study of the applicability of the concrete protection method by sulfuric acid-proof mortar Ken-ichi Fujisawa 1, Keisuke Inoue 1* 1 NIPPON JIKKOU Co.Ltd,Japan * 3-4-7 suzuri-tyou, Akashi-shi, Hyougo-ken,673-0028,
More informationINTRODUCTION TO CERAMICS, DR KASSIM AL-JOUBORY UNIVERSITY OF TECHNOLOGY BAGHDAD -IRAQ
INTRODUCTION TO CERAMICS, GLASS AND REFRACTORIES DR KASSIM AL-JOUBORY UNIVERSITY OF TECHNOLOGY BAGHDAD -IRAQ 10) REFRACTORIES ٢ Refractories are materials that can withstand high temperatures without softening
More informationFLOW AIDS THE WORLDWIDE LEADER IN VIBRATION TECHNOLOGY
FLOW AIDS THE WORLDWIDE LEADER IN VIBRATION TECHNOLOGY WHY FLOW AIDS? SITUATION Due to their characteristics, many powders inside silos, hoppers, chutes, piping, tanks or any other container will tend
More informationBulk goods measurements for high throughput rates
FlowJamHTC application overview MaxxFlow application overview Bulk goods measurements for high throughput rates "Supplying intelligent measuring systems for industry since 1994" Development + Production
More informationPREPARATION OF RAW MATERIALS AND SHAPING OF CERAMIC TILES
PREPARATION OF RAW MATERIALS AND SHAPING OF CERAMIC TILES INTRODUCTION: RAW MATERIALS FOR THE PRODUCTION OF CERAMIC TILES Mariano Paganelli FIRST PART: RAW MATERIALS PREPARATION Chapter 1. BODY FORMULATION
More informationApplication Engineering Services. Solutions for all Surface Engineering Needs
Application Engineering Services Solutions for all Surface Engineering Needs Henkel Your Partner for Maintenance & Repair Solutions With years of experience in the industrial maintenance market, Henkel
More informationstop the slip - get the grip ..trusted since 1950 ceramic pulley lagging for belt conveyor systems
stop the slip - get the grip ceramic pulley lagging for belt conveyor systems..trusted since 1950 In 1950 we invented the worldwide first porous ceramic pulley friction lagging COMBI which led to the development
More informationTechnical Data Sheet StoCrete TG 252
Repair mortar, sulphate-resistant, polymermodified, cementitious, layer thickness 6-30 mm Characteristics Area of application as concrete repair product for the repair of concrete structures (concrete
More informationCastoDur Diamond Plates
Wearfaced Parts and Solutions CastoDur Diamond Plates Enduring Performance Stronger, with Castolin Eutectic Active protection against abrasion and erosion Reduce maintenance costs thanks to the extended
More informationFGD System Selector Dewatering Area
System Selector Dewatering Area Process Water Tank Make Up Water Tanks Wastewater Treatment Clarifier Coal Handling Area Waste Water Tank Service Water Tanks Mist Eliminator Water Tanks Concrete Sumps
More informationREFRACTORIES. Definition Classification Properties Manufacture of refractory bricks Properties and applications of Refractory bricks
Topics REFRACTORIES Definition Classification Properties Manufacture of refractory bricks Properties and applications of Refractory bricks Definition Substances which can with stand high temperature without
More informationCEMENT MANUFACTURING PROCESS
CEMENT MANUFACTURING PROCESS Definition: Defined as a product material obtained by calcination of calcareous (a material containing lime) and argillaceous (a material which contain silica) materials. According
More informationProven solutions in ore processing
Proven solutions in ore processing Several customers rely on Larox solutions for their most demanding processes. Larox valves and pumps have proven their superior quality, reliability, excellent wear resistance
More informationResimac Ltd. Engineered Polymer Solutions
Resimac Ltd Engineered Polymer Solutions Resimac overview WHO WE ARE. UK based manufacturer Dedicated to research and development Emphasis on quality and quality control systems Matthew McDonnell 15 years
More information