SUPERALLOYS. Superalloys are high-performance materials AGE-HARDENABLE
|
|
- Ursula Walters
- 5 years ago
- Views:
Transcription
1 AGE-HARDENABLE SUPERALLOYS To select the most suitable wrought age-hardenable superalloy for a specific application, engineers must know the basic mechanical properties as well as other characteristics such as resistance to fatigue, crack growth, and corrosion. Richard B. Frank* Carpenter Technology Corporation Reading, Pennsylvania Superalloys are high-performance materials designed to provide high mechanical strength and resistance to surface degradation at high temperatures of 1200 F (650 C) or above. They combine high tensile, creep-rupture, and fatigue strength; good ductility and toughness; and excellent resistance to oxidation and hot corrosion. Furthermore, superalloys are designed to retain these properties during long-term exposures at elevated temperatures. This article focuses on the wrought age-hardenable alloys, which are the most common superalloys. Wrought materials can be formed by hotworking and cold-working operations. Not discussed here are the cast, powder metallurgy, and oxide dispersion-strengthened superalloys that can also offer enhanced properties. Superalloy applications The first age-hardenable, high-temperature alloy *Member of ASM International dates back to about 1929, when various developers added titanium and aluminum to the standard 80% nickel/20% chromium resistance-wire alloy. This was a precursor to the nickel-base superalloy, developed during 1940 to 1944 but still in use today. Little was done to advance the original age-hardenable alloys until the time period of 1935 to 1944, when World War II spurred demand for improved alloys suitable for the early aircraft gas turbine engines. Alloy development activity exploded in the 1950s and 1960s to keep pace with the demands of the gas turbine engine industry. Progress in superalloy development not only made the jet engine possible, but also allowed for constantly increasing thrust-to-weight ratios over the last 60 years. The primary application for superalloys is still in hot sections of aircraft gas turbine engines, accounting for over 50% of the weight of advanced engines. However, the excellent performance of these materials at elevated temperatures has expanded their application far beyond this industry. In addition to aerospace components, these alloys are specified for turbine engines for marine, industrial, and land-based power generation, as well as vehicular applications. Specific engine parts include turbine disks, blades, compressor wheels, shafts, combustor cans, afterburner parts, and engine bolts. Beyond the gas turbine engine industries, superalloys are chosen for applications in rocket engines, space, petrochemical/energy production, internal combustion engines, metal forming (hotworking tools and dies), heat-treating equipment, nuclear power reactors, and coal conversion. Although these alloys are primarily for service Table 1 Nominal compositions of wrought age-hardenable superalloys* Alloy Cr Ni Co Mo Ti Al Nb Zr Fe Other Pyromet max Bal 0.3 V NCF 3015 () Bal Pyromet Bal Pyromet Bal Pyromet max Pyromet max Pyromet max 1.25 W Pyromet max Pyromet max Pyromet max Pyromet max Low-expansion superalloys (low chromium) Pyromet CTX max max 5 Bal Thermo-Span Bal *These alloys also contain small amounts of C, Mn, S, P, S, B, and Zr. ADVANCED MATERIALS & PROCESSES/JUNE
2 Superalloys are classified into three main groups, according to whether they are based on nickel, iron, or cobalt. at elevated temperatures above 1000 F (540 C), the characteristics of high strength and excellent environmental resistance have made some superalloys an ideal choice for lower-temperature applications. Examples are prosthetic devices and components for deep sour-gas wells in oil/gas exploration. Chemical composition Table 1 shows the nominal compositions of the most common wrought age-hardenable superalloys. These alloys contain various combinations of nickel, iron, cobalt, and chromium, with lesser amounts of other elements such as molybdenum, niobium, titanium, and aluminum. With minor amounts of beneficial elements such as boron and zirconium, these alloys may contain up to 12 intentional additions that help to impart and maintain critical properties at elevated temperatures. Many other elements such as silicon, phosphorus, sulfur, oxygen, nitrogen, and a larger number of tramp elements (such as lead, bismuth, selenium) must be tightly controlled in superalloys to avoid detrimental effects on high-temperature properties. These minor and tramp elements are controlled during raw material selection prior to melting, as well as during the melting/remelting processes. Superalloys are classified into three main groups, according to whether they are based on nickel, iron, or cobalt. Nickel-base superalloys (>50% Ni) are the most common group. About half of the alloys in Table 1 are considered nickel-base alloys, and the others contain large additions of nickel. The nickel base has a high tolerance for alloy additions that might otherwise cause phase instability leading to loss of strength, ductility, and/or environmental resistance. Iron-base superalloys are less costly, but are also less tolerant of alloying additions and typically have lower mechanical properties and lower maximum temperatures. Examples are Pyromet alloy and NCF 3015() alloy. These contain an austenitic stainless steel base with additions of nickel, titanium, and aluminum to promote age hardening. Pyromet alloys and have similar amounts of nickel and iron, and can be considered nickel-iron base superalloys. The higher nickel levels of and alloys allow for larger additions of strengthening elements without deleterious effects. Cobalt-base superalloys are fewer in number than nickel- and iron-base superalloys. They are significantly higher in cost and typically cannot be age-hardened to high strength levels. However, cobalt is an important alloying addition to nickelbase alloys because it extends the maximum service temperature by reducing the solubility of the age-hardening phase. and Pyromet alloys and are nickel-base alloys with 10 to 15% cobalt. These alloys have the highest temperature capability of the common wrought agehardenable superalloys. Chromium, usually in the range of 14 to 23 wt%, is a critical alloying addition to nearly all superalloys. As in stainless steels, chromium forms a tightly adherent, protective oxide film (Cr 2 O 3 ) on the surface to resist oxidation and corrosion at high temperatures, as well as corrosion at lower temperatures. This surface layer protects the alloy from the harmful effects of the elements oxygen, nitrogen, and sulfur. Although most superalloys contain at least 14% chromium, in some applications it is critical to minimize thermal expansion. Pyromet CTX-909 and Thermo-Span alloys are considered low-expansion superalloys that have low chromium contents to minimize expansion of the nickel-cobalt-iron base. However, these lower amounts of chromium mean that resistance to oxidation and hot corrosion is reduced; therefore, high-temperature coatings are often applied prior to service. Of the two alloys, 909 alloy provides the lowest expansion coefficient, while Thermo-Span alloy (5.5% chromium) provides improved environmental resistance. Other elemental additions Refractory elements such as molybdenum, tungsten, and niobium, with their large atomic diameters, raise high-temperature strength and stiffness by straining the nickel-iron base matrix. Alloys and contain larger additions of molybdenum to increase this solid solution strengthening effect. Other alloying additions such as chromium and aluminum also contribute to solid solution strengthening, but to a lesser extent. The elements titanium, aluminum, and niobium are added to the nickel or nickel-iron matrix to form an intermetallic phase Ni 3 (Al, Ti, Nb) during age-hardening heat treatments. The resultant gamma prime or gamma double-prime phases are the primary strengthening agents in superalloys. This will be discussed in more detail in the next section on age-hardening. Although elements such as boron, zirconium, and magnesium may be added at levels less than 0.1 wt%, the beneficial effects can be very potent. These elements segregate to and stabilize grain boundaries, which significantly improves hot workability, high-temperature strength, and ductility. Small additions of carbon also may be added to form carbides that restrict grain growth and grain boundary sliding during high-temperature operation. Age hardening The major strengthening mechanism in superalloys is age hardening. Yield strength of nickel alloys is typically increased by a factor of two or three by precipitation of the gamma prime and/or gamma double-prime, Ni 3 (Al, Ti, Nb) hardening phase. Although the phase is based on the nickel aluminide (Ni 3 Al) intermetallic, up to 60% of the aluminum can be replaced by titanium or niobium, which actually increases strength of the alloy. The gamma prime phase is rather unique in that its strength actually increases with temperature up to 1200 F (650 C), and it is relatively ductile 38 ADVANCED MATERIALS & PROCESSES/JUNE 2005
3 Table 2 Heat treatment and yield strength at various temperatures for selected alloys Approximate temperature 75 F 1200 F 1300 F 1400 F 1500 F 1600 F Alloy limit, F ( C) (24 C) (650 C) (705 C) (760 C) (815 C) (870 C) Heat treatment 0.2% offset yield strength, ksi (MPa) Pyromet B B-2100/2h/AC+1550 (760 ) (640) (565) (530) (450) (310) /24h/AC+1300 /20h/AC Pyromet A A-1625 /2h/AC+1300 (595 ) (870) (760) (710) /20h/AC Pyromet /8h/AC+1300 (815 ) (680) (605) (585) (545) (435) (285) /16h/AC Pyromet /1h/OQ+1325 (705 ) (690) (605) (565) (425) (230) /16h/AC NCF 3015 () /0.5h/AC+1382 (760 ) (690) (675) (650) (465) (405) /4h/AC Pyromet /1h/AC+1575 (815 ) (750) (710) (690) (670) (605) /4h/AC+1350/4h/AC Pyromet /1h/AC+1575 (815) (795) (760) (725) (685) (605) /4h/AC+1350/4h/AC B B-1975/4h/OQ+1550 (870 ) (795) (705) (690) (660) (600) (515) /4h/AC+1400 /16h/AC A A-1850 /4h/OQ+1550 (870 ) (910) (795) (785) (750) (660) (525) /4h/AC+1400 /16h/AC Pyromet /2h/WQ+1450 (760 ) (895) (795) (765) (675) (515) /2h/AC+1325 /24h/AC Pyromet /1h/AC+1550 (705 ) (1005) (860) (800) (660) /3h/AC+1325 /8h/FC to 1150 /8h/AC Pyromet /4h/AC+1400 (870 ) (1035) (965) (940) (910) (815) (540) /16h/AC Pyromet /1h/AC+1325/8h/FC (705 ) (1160) (995) (915) (765) to 1150 /8h/AC Pyromet /2h/AC+1975/4h/ (870 ) (1195) (1130) (1110) (1050) (930) (750) OQ+1200 /24h/AC+1400 /8h/AC Low-expansion superalloys (low chromium) Pyromet CTX /1h/AC+1325 (650) (1020) (970) /8h/FC to 1150 /8h/AC Thermo-Span /1h/AC+132 (675 ) (895) (825) (675) 5 /8h/FC to 1150 /8h/AC and resistant to oxidation. Gamma prime precipitates as very fine spheroidal or cuboidal particles in the nickel-iron matrix during aging. Although most of the superalloys are age-hardened by the titanium-rich gamma prime phase, a niobium-rich variant called gamma double-prime is the primary strengthening phase in some superalloys such as Pyromet alloys and. The niobium-rich phase provides higher strength up to 1200 F (650 C), but is unstable above 1200 F (650 C). Thus, and alloys have a lower temperature limit than the alloys strengthened with the titanium-rich gamma prime phase. Because the gamma double-prime reaction is more sluggish, these alloys also tend to have better hot workability and weldability. Heat treatment Proper heat treatment is critical to achieving the necessary level of properties in age-hardenable superalloys. Typical heat treatments for these alloys are listed in the mechanical property Tables 2 and 3. The initial solution heat treatment typically dissolves all precipitated phases except for some primary carbide and nitride phases. The typical range for the wrought age-hardenable superalloys is 1650 to 2100 F (900 to 1150 C) for one to four hours, followed by a rapid air cool or a quench in water, polymer, or oil. The selection of solution treatment time and temperature varies with the alloy and its phase solvus temperatures, and also depends on the specific properties that are most important for the intended application. Alloys with higher hardener contents (Ti, Al, Nb) require higher temperatures to solution any hardener phase that may have precipitated during hot working or cooling. Best tensile and fatigue properties are typically developed with lower solution temperatures that result in a finer grain size. In contrast, better longterm stress-rupture and creep properties are generally achieved with higher-temperature solution treatments that result in coarser grain size and lower tensile yield strength. For these reasons, it ADVANCED MATERIALS & PROCESSES/JUNE
4 Table 3 Stress-rupture properties of wrought age-hardenable superalloys Approximate temperature 1200 F 1300 F 1400 F 1500 F 1600 F Alloy limit, F ( C) (650 C) (705 C) (760 C) (815 C) (870 C) Heat treatment Stress for 1000-hour life, ksi (MPa) Pyromet F/1h/OQ+1325 F/16h/AC (705) (315) (200) (105) Pyromet F/8h/AC+1300 F/16h/AC (815) (450) (290) (185) (85) Pyromet F/1h/AC+1575 F/4h/ (815) (470) (310) (205) (125) AC+1350/4h/AC Pyromet F/1h/AC+1575 F/4h/ (815) (470) (310) (205) (125) AC+1350/4h/AC Pyromet F/2h/AC+1550 F/24h/ (760) (460) (295) (185) (105) AC+1300 F/20h/AC Pyromet F/2h/WQ+1450 F/2h/ (760) (510) (360) (205) (95) AC+1325 F/24h/AC Pyromet F/1h/AC+1550 F/3h/ (705) (580) (365) (170) AC+1325 F/8h/FC to 1150 F/8h/AC Pyromet F/1h/AC+1325 F/8h/FC to (705) (615) (385) (195) 1150 F/8h/AC F/4h/OQ+1550 F/4h/ (870) (615) (440) (290) (180) (110) AC+1400 F/16h/AC Pyromet F/4h/AC+1400 F/16h/AC (870) (695) (530) (340) (200) (115) Pyromet F/2h/AC+1975 F/ (870) (760) (640) (460) (310) (210) 4h/OQ+1200 F/24h/ AC+1400 F/8h/AC NCF 3015 () F/0.5h/AC+1382 F/4h/AC (760) (440) (290) (170) Low-expansion superalloys (low chromium) Pyromet CTX F/1h/AC+1325 F/8h/FC to (650) (330) 1150 F/8h/AC Thermo-Span F/1h/AC+1325 F/8h/FC to (675) (435) 1150 F/8h/AC is common to specify two or more preferred heat treatments for superalloys. In some cases, another objective of the solution treatment is to form a more beneficial distribution of a second phase such as carbide in Pyromet alloy and delta phase (Ni 3 Nb) in Pyromet alloy. After solution treatment, one or more aging treatments are applied to precipitate the hardening phase and possibly other phases in the suitable amount and distribution. As with solution treatment, the selection of aging temperatures depends on the alloy and the combination of properties needed. The aging range for age-hardenable superalloys is 1150 to 1600 F (620 to 870 C). Aging times range from four hours to 24 hours. Double-aging treatments are quite common to maximize strength and to develop the best combination of short-term tensile and long-term creep-rupture properties. The primary aging treatment precipitates a coarser distribution of the hardener phase, and may also improve the type and distribution of carbides on grain boundaries. The secondary age is typically about 200 F (110 C) below the primary aging temperature, precipitating a finer dispersion of the gamma-prime phase. For some higher-strength applications, the alloy is direct-aged after hot, warm, or cold working, without an intermediate solution treatment. The strain from working serves to further enhance tensile and fatigue properties, although with some sacrifice in creep-rupture properties. Mechanical properties For the design engineer or materials specifier, a review of terms defining applicable mechanical properties may be helpful: Tensile properties: The design of load-bearing structures is often based on yield strength, or in some cases, the ultimate tensile strength of the material. Yield strength is a measure of the maximum stress a material can withstand before it permanently deforms. Tensile strength is a measure of the maximum stress a material can withstand before it fractures. Elevated-temperature tensile properties are most applicable to short-term exposures at higher temperatures. Creep and stress-rupture properties are more applicable for longer-term exposures. Creep and rupture properties: Creep and rupture strengths become important when the ma- 40 ADVANCED MATERIALS & PROCESSES/JUNE 2005
5 terial must withstand the combined effects of high temperature and stress for long periods of time. At elevated temperatures, metals stretch or creep at stresses well below the yield strength. Superalloys are more resistant to creep than low-alloy or stainless steels, but creep still develops at temperatures above about 1000 F (540 C). Creep properties are a measure of the alloy s resistance to stretching under a constant load. Stress-rupture or creep-rupture properties are a measure of resistance to fracture under a constant load (creep test taken to fracture). Both properties are expressed as stress or strength values that will cause a given amount of creep (0.1% to 1%) or rupture in a given amount of time (100 to 100,000 hours). Tables 2 and 3 list typical tensile (yield) and stress-rupture strength properties of the age-hardenable superalloys at temperatures of 1200 to 1600 F (650 to 870 C). Yield strengths at room temperature are also listed in Table 2. It should be noted that the data represents approximate nominal strength values for specific heat treatments. Actual values can vary by up to 35% due to differences in composition, hot/cold working practices, and heat treatment. For example, superalloys such as Pyromet and may contain several different aim compositions within the broader industry ranges to optimize properties for specific applications. Higher levels of the age-hardening elements titanium, aluminum, and niobium result in higher strength. Hot or cold working an alloy to provide a finer grain size typically increases tensile yield strength, but decreases stress-rupture strength. As discussed previously, properties of all agehardenable superalloys depend on heat treatment. Alloys such as Pyromet and have two or more preferred heat treatments (see Table 2) depending on whether the application requires better short-term tensile and fatigue properties or long-term creep and stress-rupture properties. Examples of alternative heat treatments have been shown for and alloys, but the reader should refer to manufacturer datasheets for a more complete listing of alternative heat treatments for the other superalloys. Other properties: Although tensile and creeprupture are the most basic mechanical properties considered for high-temperature applications, design criteria may also include resistance to fatigue (low- and high-cycle), crack growth, and wear/erosion. Hardness and hot-hardness tests are sometimes used as a rough measure of yield strength and resistance to wear/erosion. Alloy selection A simplified method known as the Carpenter Selectaloy system can help designers and engineers select the most suitable superalloy based on strength and maximum temperature requirements. Figures 1 and 2 contain Selectaloy diagrams for the 14 superalloys discussed in this article. Yield strength (Fig. 1) or stress-rupture strength (Fig. 2) increases vertically on the Selectaloy diagram, and Tensile yield strength 909 // Thermo-span / / 909/ Thermo- Span / / / (24) (650) (705) (760) (815) (870) Temperature, F ( C) Fig. 1 Age-hardenable superalloy Selectaloy diagram showing yield strength. Stress-rupture strength / / Thermo- Span (650) / /X- 750/ 1300 (705) / Fig. 2 Age-hardenable superalloy Selectaloy diagram showing stressrupture strength. temperature increases from left to right. The alloys are shown multiple times on the diagrams because the alloys are useful over a range of temperatures. The diagram can be used to estimate not only how the strength of an alloy decreases with temperature, but also how the strengths of different alloys compare at different temperatures. It should be noted that the alloys were positioned on the Selectaloy diagrams based on average strength values that are representative of compositions and heat treatments typical for each alloy. An alloy s relative position could move up or down, left or right, with relatively minor modifications of composition, processing, and heat treatment. Temperature limits should be considered approximate. Therefore, while the Selectaloy diagrams are useful tools to screen candidate alloys, they are not a substitute for a more detailed evaluation of the critical properties required for an intended application. Pyromet alloy is the most basic age-hardenable superalloy in terms of properties and cost. provides the lowest strength levels, but still higher by a factor of two than other non-agehardenable stainless alloys. When increased / 1400 (760) Temperature, F ( C) 1500 (815) ADVANCED MATERIALS & PROCESSES/JUNE (870)
6 Thermo-Span 909 Alloy selection must be based on expected cost effectiveness Relative raw material cost, ten-year average Fig. 3 Relative raw material cost of age-hardenable superalloys. strength or temperature resistance is required, higher nickel alloys are typically preferred. Alloys with the highest levels of strength and temperature resistance typically contain the highest alloy contents and significant levels of cobalt. Relative cost of these alloys will be discussed in the next section. The Selectaloy diagrams presented in this article provide a method to compare basic strength properties and temperature limitations of common wrought age-hardenable superalloys. However, alloy selection will undoubtedly depend on many other considerations, including other physical and mechanical properties, as well as environmental resistance and cost. For example, Thermo-Span and Pyromet CTX-909 alloys provide a benefit of much lower expansion during heating, but at the expense of oxidation and corrosion resistance in the uncoated condition. Pyromet and alloys provide similar strength and temperature resistance, but the higher chromium content of alloy results in much improved resistance to sulfidation and other forms of hot corrosion. Alloy cost From the user s standpoint, alloy selection must be based on expected cost effectiveness. In today s competitive global environment, overdesign is less common than in the past. The trend is to select the lowest-cost material to meet design requirements for the application. However, a higher-cost alloy may be justified to minimize overall lifecycle cost, or for longer service of certain components in a system that is critical or too expensive to be shut down for maintenance. Surely, knowledge of alloy capabilities is critical in making the best decision. As temperature and strength requirements increase, so does the necessary alloy content. Figure 3 compares the relative alloying costs of the 14 alloys, with Pyromet alloy as a base (cost factor of 1.0). The cost factors are based on ten-year averages of the intrinsic alloying element costs at market prices. Higher-temperature strength and resistance typically require higher nickel and cobalt contents. Nickel and cobalt prices have historically been volatile, with high and low prices varying by a factor of four to five. More recently, the price of molybdenum, a potent solid solution strengthener, has increased in price by a factor of nearly ten over the last two years. As discussed above, the cost factors in Fig. 3 are based only on raw material elemental costs (tenyear averages) that fluctuate significantly with time. Differences in melting, working, and other processing costs, which can be substantial, are not included in these factors. Processing yields and specific end user requirements (grain size, ultrasonic testing, etc.) significantly impact product cost. However, the cost comparisons are useful because alloying costs typically represent a large portion of superalloy product cost. Since superalloys are designed for high-temperature strength and resistance to deformation, processing difficulty and cost also increase with hot strength and maximum temperature capability. It is apparent that the alloys that provide higher levels of strength, temperature resistance, and/or specialized properties also cost more, which reinforces the importance of the alloy selection process. For more information: Richard B. Frank is Staff Specialist, High Temperature R&D, Carpenter Technology Corporation, P.O. Box 14662, Reading, PA ; tel: 610/ ; fax: 610/ ; rfrank@ cartech.com; Web site: 42 ADVANCED MATERIALS & PROCESSES/JUNE 2005
NICKEL CHROMIUM ALLOYS
NICKEL CHROMIUM AND NICKEL THORIA ALLOYS 1 NICKEL CHROMIUM ALLOYS Two distinct groups of nickel chromium alloys for high temperature uses are as follow. The first group, which includes cast alloys containing
More informationPhyscial Metallurgy and Microstructure of Superalloys
www.materialstechnology.org Physcial Metallurgy and Microstructure of Superalloys Roger Reed University of Birmingham The definition of superalloys utilized in the classic textbook 'The Superalloys' which
More informationChulalongkorn University, Bangkok, Thailand. Chulalongkorn University, Bangkok, Thailand; Abstract
Journal of Metals, Materials and Minerals. Vol.16 No.2 pp.25-31, 2006 The Effect of Long-Term Thermal Exposure at Elevated Temperatures on Microstructures and Mechanical Properties in Centrifugally Casted
More informationNickel & Stainless Steel. Product Range
Nickel & Stainless Steel Product Range General Index ITEM BRAND SIZE Inconel 600 Inconel 601 Inconel alloy Inconel 625 Inconel 718 Monel 400 Monel alloy Monel K500 Nickel 52 Nickel alloy Nickel 200 Nickel
More informationATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718)
ATI 718 Nickel-Base Superalloy (UNS Designation N07718) INTRODUCTION ATI 718 alloy (N07718) is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately
More informationChapter 11 Part 2. Metals and Alloys
Chapter 11 Part 2 Metals and Alloys Nomenclature of Steels Historically, many methods for identifying alloys by their composition have been developed The commonly used schemes in this country are those
More informationSuperalloy Development for Aircraft Gas Turbines
$1.50 PER COPY 75C TO ASME MEMBERS The Society shall not be responsible for statements or opinions advanced in papers or in discussion at meetings of the Society or of its 69-GT-7 Divisions or Sections,
More informationMaterials for elevated temperature heat exchangers in reactors
Materials for elevated temperature heat exchangers in reactors Several materials have been introduced for heat exchangers in 4 th generation extremely high temperature reactor (EHTR) also called as next
More informationCHAPTER INTRODUCTION
1 CHAPTER-1 1.0 INTRODUCTION Contents 1.0 Introduction 1 1.1 Aluminium alloys 2 1.2 Aluminium alloy classification 2 1.2.1 Aluminium alloys (Wrought) 3 1.2.2 Heat treatable alloys (Wrought). 3 1.2.3 Aluminum
More informationEngineering Materials
Engineering Materials Lecture 2 MEL120: Manufacturing Practices 1 Selection of Material A particular material is selected is on the basis of following considerations 1. Properties of material 1. Properties
More informationATI 13-8 ATI Technical Data Sheet. Precipitation Hardening Alloy INTRODUCTION FORMS AND CONDITIONS. (UNS S13800, ASTM Type XM-13)
ATI 13-8 Precipitation Hardening Alloy (UNS S13800, ASTM Type XM-13) INTRODUCTION ATI 13-8 alloy (UNS S13800) is a martensitic precipitation-hardening stainless steel that has excellent strength, high
More informationATI Nb. ATI Nb. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES SPECIFICATION COVERAGE CHEMICAL COMPOSITION
ATI 20-25+Nb Stainless Steel: Austenitic (UNS S35140) GENERAL PROPERTIES ATI 20-25+Nb alloy is an austenitic stainless steel intended primarily for elevated temperature service. This alloy fills a performance
More informationEffects in Ductile Iron
Summary of Element Effects in Ductile Iron Rick Gundlach Element Materials Technology Wixom Insert Company Logo Here DIS Annual Meeting, June 7, 2012 Muskegon, Michigan Types of Alloying Elements Substitutional
More informationATI 332 ATI 332. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES TYPICAL ANALYSIS PHYSICAL PROPERTIES
ATI 332 Stainless Steel: Austenitic (UNS N08800) GENERAL PROPERTIES ATI 332 alloy is a nickel and chromium austenitic stainless steel designed to resist oxidation and carburization at elevated temperatures.
More informationATI 601 ATI 601. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N06601)
Nickel-base Alloy (UNS N06601) INTRODUCTION alloy (UNS Designation N06601) is an austenitic nickel-chromium-iron alloy designed for both heat and corrosion resistance. As compared to ATI 600 alloy (UNS
More informationHigh-Strength Low-Alloy Steels
High-Strength Low-Alloy Steels Introduction and Overview High-strength low-alloy (HSLA) steels, or microalloyed steels, are designed to provide better mechanical properties and/or greater resistance to
More informationMICRO-ALLOYING IMPROVES RESISTANCE TO HIGH TEMPERATURE ENVIRONMENTS
MICRO-ALLOYING IMPROVES RESISTANCE TO HIGH TEMPERATURE ENVIRONMENTS J.D. Wilson, T.J. Carney, J.C Kelly Rolled Alloys, Inc. 125 West Stems Road Temperance, MI 48182-9546 ABSTRACT Modern melting and refining
More informationStainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationLecture 12: High Temperature Alloys
Part IB Materials Science & Metallurgy H. K. D. H. Bhadeshia Course A, Metals and Alloys Lecture 12: High Temperature Alloys Metallic materials capable of operating at ever increasing temperatures are
More informationCreep and High Temperature Failure. Creep and High Temperature Failure. Creep Curve. Outline
Creep and High Temperature Failure Outline Creep and high temperature failure Creep testing Factors affecting creep Stress rupture life time behaviour Creep mechanisms Example Materials for high creep
More informationis detrimental to hot workability and subsequent surface quality. It is used in certain steels to improve resistance to atmospheric corrosion.
Glossary of Terms Alloying Elements ALUMINIUM - Al is used to deoxidise steel and control grain size. Grain size control is effected by forming a fine dispersion with nitrogen and oxygen which restricts
More informationStainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationStainless Steel Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationHEAT TREATMENT VARIABLES ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CAST PWA 1472
HEAT TREATMENT VARIABLES ON MICROSTRUCTURE AND MECHANICAL PROPERTIES OF CAST PWA 1472 Megan Wardell, J.F. Radavich and E.A. Loria School of Materials Engineering, Purdue University West Lafayette, IN 47907
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION Licensed to Juan Rodriguez AMS 5754M Issued MAY 1954 Revised AUG 2007 Superseding AMS 5754L Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni
More informationStainless Steel (17/4PH&630) Bar
SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic
More informationNominal Composition. Weight % Nickel: 58 Balance Cobalt: 13.5 Iron:
HAYNES Waspaloy alloy Principle Features HAYNES Waspaloy alloy (UNS N07001) is an age-hardenable, nickel-based superalloy with very good strength at temperatures up to about 1800 F (980 C). It is widely
More informationUse the arrow keys to easily navigate through the course.
STEEL Use the arrow keys to easily navigate through the course. Back Next 1 STEEL 2 A BRIEF HISTORY OF STEEL The history of steel is closely connected to the development of human culture and civilization.
More informationStainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
More informationA coefficient of thermal expansion approximately 20% lower than that of INCONEL alloy 718.
www.specialmetals.com The newest of the high-performance superalloys invented by Special Metals Corporation, INCONEL alloy 783 (UNS R3783/U.S. Patent 5,478,417), is an oxidation-resistant, low expansion,
More informationDiscover the variety of Metal Powders
Discover the variety of Metal Powders The range of our standard metal powder Non Ferrous, Tool Steel, Stainless Steel and Light Alloys SLM The Industrial Manufacturing Revolution PIONEERS in metal-based
More informationNickel-Chrome Alloy Inconel 625 (UNS N06625)
NickelChrome Alloy Inconel 625 (UNS N06625) Inconel Alloy 625 is a corrosion and oxidation resistant nickel alloy that is employed for its high strength and good aqueous corrosion resistance properties.
More informationVDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
More informationfamily of stainless steels can be divided into five (5) categories:
Welcome to the fifth issue of Tech Talk. This newsletter covers a range of topics on various welding products, applications, metallurgy, techniques, and economics. Previous issues are archived at www.unibraze.com.
More informationTitanium and titanium alloys. Josef Stráský
Titanium and titanium alloys Josef Stráský Lecture 3: Technological aspects of Ti alloys Pure Ti metallurgy, properties and applications α+β alloys microstructures, metallurgy, heat treatment Ti-6Al-4V
More informationIncoloy Alloy 800H/800HT (UNS N08810/088011)
Incoloy 800H/800HT (UNS N08810/088011) Incoloy 800H/HT is an outstanding corrosion resistant alloy that is recommended for use in the high temperature industrial conditions. It has higher strength than
More informationDEVELOPMENT OF CASTABLE PRECIPITATION HARDENED NI-BASE ALLOYS FOR 750 C TECHNOLOGY WITHIN NEXTGENPOWER PROJECT
DEVELOPMENT OF CASTABLE PRECIPITATION HARDENED NI-BASE ALLOYS FOR 750 C TECHNOLOGY WITHIN NEXTGENPOWER PROJECT R. Leese (1) S. Roberts (2) Goodwin Steel Castings Limited, Ivy House Foundry, Ivy House Road,
More informationSTAINLESS STEELS. Chromium and nickel content in the various groups of stainless steels
These steels contain a high percentage of chromium and sometimes other alloys and have been designed to prevent different types of corrosion. There are two kinds of corrosion: dry corrosion (often named
More information4.0 Alloying Elements and Microstructural Phases
4.0 Alloying Elements and Microstructural Phases There is a direct link between microstructure and properties and if the microstructure is altered by heat treatment, fabrication or composition then the
More informationSTRENGTHENING PRECIPITATES IN ARGON ATOMIZED PM ALLOY 625. Frank J. Rizzo. Crucible Compaction Metals 1001 Robb Hill Road Oakdale, Pennsylvania 15071
STRENGTHENING PRECIPITATES IN ARGON ATOMIZED PM ALLOY 625 Frank J. Rizzo Crucible Compaction Metals 1001 Robb Hill Road Oakdale, Pennsylvania 15071 Abstract The argon atomized powder metal version of alloy
More informationSEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components
SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components Technology Transfer 91060574B-STD and the logo are registered service marks of, Inc. 1996, Inc. SEMASPEC Test Method
More informationDEVELOPMENT OF A FABRICABLE GAMMA-PRIME (γ') STRENGTHENED SUPERALLOY
DEVELOPMENT OF A FABRICABLE GAMMA-PRIME (γ') STRENGTHENED SUPERALLOY L. M. Pike Haynes International, West Park Ave., Kokomo, IN 46904-9013, USA Keywords: wrought superalloy, alloy development, fabricability,
More informationComposite Materials. Metal matrix composites
Composite Materials Metal matrix composites Introduction The properties that make MMCs attractive are high strength and stiffness, good wear resistance, high service temperature, tailorable coefficient
More informationA STUDY OF CASTING CHARACTERISTICS FOR DIE-CAST ALUMINUM ALLOY
ME8109: Casting And Solidification of Material A STUDY OF CASTING CHARACTERISTICS FOR DIE-CAST ALUMINUM ALLOY Department of Mechanical & Industrial Engineering Graduate Program in Mechanical Engineering
More informationALLOYS 625 AND 725: TRENDS IN PROPERTIES AND APPLICATIONS
Superalloys 718, 625, 706 and Derivatives 2005 Edited by E.A. Loria TMS (The Minerals, Metals & Materials Society), 2005 ALLOYS 625 AND 725: TRENDS IN PROPERTIES AND APPLICATIONS Lewis E. Shoemaker Huntington
More informationElectron Beam Melted (EBM) Co-Cr-Mo Alloy for Orthopaedic Implant Applications Abstract Introduction The Electron Beam Melting Process
Electron Beam Melted (EBM) Co-Cr-Mo Alloy for Orthopaedic Implant Applications R.S. Kircher, A.M. Christensen, K.W. Wurth Medical Modeling, Inc., Golden, CO 80401 Abstract The Electron Beam Melting (EBM)
More informationTypical aerospace-standard materials
JOHANN MAIER GmbH & Co. KG Schockenriedstraße 3 70565 Stuttgart-Vaihingen Typical aerospace-standard materials 1.4314.7 Stainless, austenitic steel 0,05C-1Cr-Ni X5 CrNi 1 1.4301 / AISI 304 60 * * Special
More informationHigh strength low alloy (HSLA).
7 Alloy Steels High strength low alloy (HSLA). a type of steel alloy that provides many benefits over regular steel alloys contain a very small percentage of carbon (less than one-tenth of a percent) and
More informationMLX 17 X1CrNiMoAlTi
A very High Strength Stainless Steel CONTINUOUS METALLURGICAL SPECIAL STEELS INNOVATION RESEARCH SERVICE DEVELOPMENT Enhancing your performance THE INDUSTRIAL ENVIRONMENT The use of Precipitation Hardening
More informationAlloy Steels. Engineering Materials. Introduction : Msc. Shaymaa Mahmood
Alloy Steels Introduction : Steels are, essentially, alloys of iron and carbon, containing up to 1.5 % of carbon. Steel is made by oxidizing away the impurities that are present in the iron produced in
More informationHastelloy G-30 (UNS N06030) Chemical Composition
Hastelloy G-30 (UNS N06030) Hastelloy G-30 is commonly used for providing excellent resistance to chemical conditions. It offers resistance to nitric acid, phosphoric acid, hydrochloric acid and hydrofluoric
More information3D METALS Discover the variety of Metal Powders The range of our standard metal powders
3D METALS Discover the variety of Metal Powders The range of our standard metal powders Non Ferrous, Tool Steel, Stainless Steel and Light Alloys SLM The Industrial Manufacturing Revolution PIONEERS in
More informationAlloy Design and Innovative Manufacturing Technology of High-Strength Ni-base Wrought Alloy for Efficiency Improvement in Thermal Power Plants
Alloy Design and Innovative Manufacturing Technology of High-Strength Ni-base Wrought Alloy for Efficiency Improvement in Thermal Power Plants 32 SHINYA IMANO *1 JUN SATO *2 HIRONORI KAMOSHIDA *2 TAKASHI
More informationSTAINLESS STEELS. Experience has shown that, at least for stainless. for Corrosion Resistance
STAINLESS STEELS for Corrosion Resistance Newly developed stainless steels provide increased corrosion resistance, improved mechanical properties, easier forming and fabrication, and/or improved economy.
More informationINCONEL Alloy 706 Misty Pender
INCONEL Alloy 706 Misty Pender 2007 University Turbine Systems Research Fellowship University of Central Florida, Orlando, FL Electric Power Research Institute, Charlotte, NC The INCONEL 706 superalloy
More informationSPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS
2007 SECTION II, PART A SA-479/SA-479M SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS SA-479/SA-479M (Identical with ASTM Specification A 479/A 479M-04
More informationNONFERROUS METALS AND ALLOYS
NONFERROUS METALS AND ALLOYS Chapter 7 7.1 Introduction Usage of nonferrous metals and alloys has increased due to technology Possess certain properties that ferrous materials do not have Resistance to
More information(C) Global Journal of Engineering Science and Research Management
LOW CYCLE FATIGUE LIFE PREDICTION OF INCONEL 617 IN ELEVATED TEMPERATURE FOR POSSIBLE USE IN GAS TURBINE COMBUSTION CHAMBER LINERS Ravi Dewangan *1, Shailendra Kumar Bohidar 2, Prof. Brijesh Patel 3 1
More informationNickel Based Superalloy Hastelloy B-3 (UNS N10675)
Nickel Based Superalloy Hastelloy B-3 (UNS N10675) Hastelloy B-3 is manufactured for providing excellent resistance to reducing acids at the different content %s and temperature limits. It shows better
More informationATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)
ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper
More informationNonferrous Metals and Alloys: Production, General Properties, and Applications
Nonferrous Metals and Alloys: Production, General Properties, and Applications Manufacturing Engineering and Technology 2001 Prentice-Hall Page 6-1 Approximate Cost per Unit Volume for Wrought Metals and
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA
ICS 77.140.01 H 40 GB NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA GB/T 221-2008 Replacing GB/T 221-2000 Notations for Designations of Iron and Steel GB/T 221-2008 How to BUY & immediately GET a
More informationRelationship Between Design and Materials for Thermal Power Plants. S. C. Chetal
Relationship Between Design and Materials for Thermal Power Plants S. C. Chetal Contents *Introduction to design codes *Operational life vs design basis life *Material selection basics *Materials for boiler
More informationSURFACE MODIFICATIONS OF PM STAINLESS STEELS FOR ENHANCED CORROSION RESISTANCE
SURFACE MODIFICATIONS OF PM STAINLESS STEELS FOR ENHANCED CORROSION RESISTANCE Chris Schade Hoeganaes Corporation Cinnaminson, NJ 08077 ABSTRACT In general, PM stainless steel parts have inferior corrosion
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC C COOPERATIVE PATENT CLASSIFICATION CHEMISTRY; METALLURGY (S omitted) METALLURGY C22 METALLURGY (of iron C21); FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON-FERROUS METALS (production of
More informationCast steel: Group of ASTM standards for steel castings and forgings
Cast steel: Group of ASTM standards for steel castings and forgings Abstract: This group of ASTM specifications covers standard properties of steel and iron castings and forgings for valves, flanges, fittings,
More informationQUANTITATIVE METALOGRAPHY OF HEAT TREATED ŽS6K SUPERALLOY
J. Belan: Quantitative metalography of heat treated ŽS6K superalloy 121 QUANTITATIVE METALOGRAPHY OF HEAT TREATED ŽS6K SUPERALLOY Juraj Belan 1,* 1 Department of Materials Engineering, Faculty of Mechanical
More information1. Introduction. 2. Objective of development and effects of alloying elements
Recent boilers have been designed for higher temperatures and pressures than those in the past and require steels with high temperature strength that is greater than that of conventional 18-8 austenitic
More informationSteel Properties. History of Steel
History of Steel Steel Properties Cast Iron Cast iron preceded wrought iron. It is brittle, has high carbon content with low tensile strength. It has excellent casting properties. It was mainly used to
More informationE-BRITE E-BRITE. Technical Data Sheet. Stainless Steel: Superferritic GENERAL PROPERTIES PLANAR SOLID OXIDE FUEL CELLS CHEMICAL COMPOSITION
E-BRITE Stainless Steel: Superferritic (UNS 44627, ASTM Type XM-27) GENERAL PROPERTIES E-BRITE alloy is a high purity ferritic stainless steel which combines excellent resistance to corrosion and oxidation
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 5659L Issued SEP 1965 Revised JAN 2004 Superseding AMS 5659K Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30CB (Nb) - 3.5Cu
More informationMECHANICAL PROPERTIES AND MICROSTRUCTURE OF IN713LC NICKEL SUPERALLOY CASTINGS
MECHANICAL PROPERTIES AND MICROSTRUCTURE OF IN713LC NICKEL SUPERALLOY CASTINGS Jiří ZÝKA 1, Irena ANDRŠOVÁ 1, Božena PODHORNÁ 1, Karel HRBÁČEK 2 1 UJP PRAHA a.s., Nad Kamínkou 1345, Prague, Czech republic,
More informationGamma Prime Phase Stability after Long-Term Thermal Exposure in Cast Nickel Based Superalloy, IN-738
312 Chiang Mai J. Sci. 2009; 36(3) Chiang Mai J. Sci. 2009; 36(3) : 312-319 www.science.cmu.ac.th/journal-science/josci.html Contributed Paper Gamma Prime Phase Stability after Long-Term Thermal Exposure
More informationMetallurgy of Aluminum Die Casting Alloys EC 305 Dave Neff
Metallurgy of Aluminum Die Casting Alloys EC 305 Dave Neff Dave Neff OUTLINE Where aluminum comes from Why alloys are useful Alloy designation and nomenclature Specific roles of alloy elements Properties
More informationSteels Processing, Structure, and Performance, Second Edition Copyright 2015 ASM International G. Krauss All rights reserved asminternational.
Steels Processing, Structure, and Performance, Second Edition Copyright 2015 ASM International G. Krauss All rights reserved asminternational.org Contents Preface to the Second Edition of Steels: Processing,
More information11.3 The alloying elements in tool steels (e.g., Cr, V, W, and Mo) combine with the carbon to form very hard and wear-resistant carbide compounds.
11-2 11.2 (a) Ferrous alloys are used extensively because: (1) Iron ores exist in abundant quantities. (2) Economical extraction, refining, and fabrication techniques are available. (3) The alloys may
More informationof Metal Alloys This is just an extension of the previous chapter Hardenability of Steels: The Jominy Test
Chapter 11 Applications and Processing of Metal Alloys This is just an extension of the previous chapter Hardenability of Steels: The Jominy Test As usual, everything is standardized! After the Jominy
More informationDesign of 10%Cr Martensitic Steels for Improved Creep Resistance in Power Plant Applications
Design of 10%Cr Martensitic Steels for Improved Creep Resistance in Power Plant Applications U.A. Sachadel, P.F. Morris, P.D. Clarke Tata Steel Europe 8th International Charles Parsons Turbine Conference
More informationEVALUATION OF ALLVAC 718PLUS ALLOY IN THE COLD WORKED AND HEAT TREATED CONDITION
Superalloys 718, 625, 706 and Derivatives 2005 Edited by E.A. Loria TMS (The Minerals, Metals & Materials Society), 2005 EVALUATION OF ALLVAC 718PLUS ALLOY IN THE COLD WORKED AND HEAT TREATED CONDITION
More informationBorn from fire, made to endure NICKEL ALLOYS
Born from fire, made to endure NICKEL ALLOYS Acroni is the largest slovenian steel manufacturer, which in order to produce steel recycles scrap in an electric arc furnace, casts it on continuous caster
More informationEOS NickelAlloy IN718 for EOSINT M 270 Systems
EOS NickelAlloy IN718 for EOSINT M 270 Systems A number of different materials are available for use with EOSINT M systems, offering a broad range of e-manufacturing applications. EOS NickelAlloy IN718
More informationStainless Steel 310/310S (UNS S31000/ UNS S31008)
Stainless Steel 310/310S (UNS S31000/ UNS S31008) Austenitic Stainless Steel 310/310S offers excellent resistance to oxidation up to 2000oF. It is a low grade steel that prevents embrittlement and sensitization.
More informationIdentification. Type Analysis
Page 1 of 12 Unit Display: English Print Now Custom 455 Stainless E-Mail Datasheet Add to My Materials UNS Number S45500 Identification Type Analysis Carbon 0.05 % Manganese 0.50 % Phosphorus 0.040 % Sulfur
More informationSTAINLESS STEEL DATASHEETS
STAINLESS STEEL DATASHEETS Alloys: 304 304L 310 316 316L 316LN 316Ti 316LVM 6Mo 21-6-9 22-13-5 904L Alloys 304 / 304L Alloys 304 / 304L (UNS S30400 / S30403) Alloys 304 (S30400) and 304L (S30403) stainless
More informationFundamentals of. Steel Product. Graduate Institute of Ferrous Metallurgy
Fundamentals of Steel Product Physical Metallurgy B.C. De Cooman Graduate Institute of Ferrous Metallurgy Pohang University of Science and Technology, South Korea J.G Speer Advanced Steel Products and
More informationME-371/571 ENGINEERING MATERIALS
ME-371/571 ENGINEERING MATERIALS Problem Set 2 1. An SAE-AISI 1035 steel alloy is slowly cooled from 950 C to room What is the pro-eutectoid phase, and at what temperature would it first appear? What are
More informationATI 441 HP ATI 441 HP. Technical Data Sheet. Stainless Steel: Ferritic INTRODUCTION STRUCTURE TYPICAL COMPOSITION (UNS S44100)
ATI 441 HP Stainless Steel: Ferritic (UNS S44100) INTRODUCTION ATI 441 HP alloy is a heat resisting ferritic grade that provides good oxidation and corrosion resistance for applications like automotive
More informationshort name: NR* technical product sheet created :57 1/10 seamless tube EN tol. acc. EN/ISO 1127 NR ,0 0,075 4,0 0,125
technical product sheet short name: NR* seamless tube EN 10216-5 tol. acc. EN/ISO 1127 Art.-Nr. kg s D NR-033-020 NR-030-040 NR-030-030 NR-030-020 NR-030-016 NR-028-035 NR-026-032 NR-026-026 NR-026-023
More informationSignificance of Alloying Element Levels in Realizing the Specified Tensile Properties in 18 wt% Nickel Maraging Steel
Materials Sciences and Application, 2011, 2, 1116-1120 doi:10.4236/msa.2011.28150 Published Online August 2011 (http://www.scirp.org/journal/msa) Significance of Alloying Element Levels in Realizing the
More informationMore Oxidation and Creep Resistance Upgrade for Type 409. Potential Substitute for 18 Cr-Cb & Type 439. Excellent Forming and Welding Characteristics
11 Cr-Cb STAINLESS STEEL P R O D U C T D ATA B U L L E T I N More Oxidation and Creep Resistance Upgrade for Type 409 Potential Substitute for 18 Cr-Cb & Type 439 Excellent Forming and Welding Characteristics
More informationSTP672-EB/JUI Index
STP672-EB/JUI. 1979 Index Accelerated cooling in controlled rolling, effect on microstructure and properties in Arctic steels, 112-119 Acicular ferrite, 145-146 Aging In hydrogen environment, 382-392 Precipitation
More informationSTRUCTURAL AND FRACTURE CHARACTERISTICS OF NICKEL-BASED ALLOYS
STRUCTURAL AND FRACTURE CHARACTERISTICS OF NICKEL-BASED ALLOYS Jitka MALCHARCZIKOVÁ a, Vít MICHENKA b, Martin POHLUDKA a, David KAŇÁK b, René FRIDRICH b a VŠB-TU Ostrava, 17. listopadu 15/2172, 708 33
More informationATI 15-7 ATI Technical Data Sheet. Semi-Austenitic Stainless Steel INTRODUCTION
ATI 1-7 Semi-Austenitic Stainless Steel (UNS S1700) INTRODUCTION ATI 1-7 Precipitation Hardening Alloy (S1700, AISI Type 632) is a chromium-nickel-molybdenum-aluminum semi-austenitic precipitation hardening
More informationMSE-226 Engineering Materials
MSE-226 Engineering Materials Lecture-7 ALLOY STEELS Tool Steels TYPES of FERROUS ALLOYS FERROUS ALLOYS Plain Carbon Steels Alloy Steels Cast Irons - Low carbon Steel - Medium carbon steel - High carbon
More informationHAYNES 244 alloy a new 760 C capable low thermal expansion alloy
MATEC Web of Conferences 14, 17004 (2014) DOI: 10.1051/matecconf/20141417004 c Owned by the authors, published by EDP Sciences, 2014 HAYNES 244 alloy a new 760 C capable low thermal expansion alloy Michael
More informationInfluence of rapid cooling rates for HIP on mechanical and corrosion properties of UNS S32205
Influence of rapid cooling rates for HIP on mechanical and corrosion properties of UNS S32205 Arnulf Hörtnagl 1, Paul Gümpel 1, Michael Hamentgen², Beat Hofer³ Institute for Materials System Technology
More informationAppendix 3 JIS Steel and Related Standards 471
Appendix 3 JIS Steel and Related Standards 471 G 3314:1995 G 3315:2002 G 3316:1987 G 3317:1994 G 3318:1994 G 3320:1999 G 3321:1998 G 3322:1998 G 3350:1987 G 3351:1987 G 3352:2003 G 3353:1990 G 3429:1988
More informationWhat is Steel? Prepared By: John Cawley
What is Steel? Prepared By: John Cawley Presentation Objectives Describe the composition of steel. Identify the differences between steel and iron. Use the steel numbering system to identify various types
More informationمرکز آموزش تخصصی ایران مواد
شبکه آزمایشگاهی FESEM, SEM, TEM,XRD XRF, SPS, TGA, DTA, DSC, FTIR, BET www.imlabsnet.ir مرکز آموزش تخصصی Iran Mavad Education Professional Center آموزش های تخصصی و نرم افزاری مهندسی مواد و متالورژی www.impec.ir
More information