Material Safety Data Sheet

Transcription

1 Material Safety Data Sheet ABX CRP CAL, ABX CRP TROL H, 1. Product and company identification 1.1. Identification of the product Product name: ABX CRP CAL, ABX CRP TROL H, Product code: Ref.ABX: , , Company identification 1.3. Emergency phone number HORIBA ABX - Rue du Caducée - Parc Euromédecine MONTPELLIER CEDEX 4 - FRANCE Tel: (33) Fax: (33) Contact the nearest first-aid station 2. Composition/information on ingredients 2.1. Description of the kit Chemical nature: Human blood serum for : - Calibration (CRP CAL) - Accuracy control of CRP (CRP TROL L & CRP TROL H) 2.2. Hazardous ingredients (name, concentration) CAS No Name Sodium azide Concentration <0.1% Symbol T+, N Risk R28, R32, R50/ Dangerous preparation according to 67/548/EEC - 99/45/EEC (Yes/No): No 3. Hazards identification Most important hazards: Potentially biohazardous material. FORM-0307-A, revision 5 Specific risks Each human blood donor unit used in the compounding of the serum base for the above referenced products has been tested by an FDA approved method and found to be non reactive for HIV ½ (HIV) Antibody, HBc Antibody, HTVL-1 Antibody, HCV Antibody, a Serological test for Syphilis (STS), Hepatitis B Surface Antigen (HbsAg) and HIV-1 Antigen (HIVAg). The above referenced products were only formed with these donors. Because no known test method can provide total assurance that products derived from human blood will not transmit infectious diseases, products containing materials from human sources should be handled as if potentially infectious. Use safe laboratory procedures as outlined in Biosafety in Microbiological and Biomedical Laboratories. Latest version documents on 1/5

2 4. First-aid-measures Inhalation: Skin contact: Eye contact: Ingestion: Wash affected area with soap and water, rinse with water. Remove and wash contaminated clothes. Immediately wash eyes, also under the eyelids, with water for at least 15 minutes. Get medical attention if irritation develops. For small amounts, flush with water. Call a doctor. 5. Fire-fighting measures Extinguishing media: This product is non-flammable. Specific risks: Special protective equipment: Additional recommendations: Sodium Azide in contact with heavy metals form explosive azides. 6. Accidental release measures Personal precautions: Wear a lab coat, protective gloves and safety goggles. Environmental precautions: Methods for cleaning/absorption: Soak up the product with absorbent material and put in the waste. Wash the affected area with water. 7. Handling and storage 7.1. Handling Precautions: Handling recommendations: 7.2. Storage Storage conditions: Incompatible materials: Packaging materials: Wear gloves and protective goggles in case of prolonged handling. Avoid contact with the skin, eyes. Handle as though potentially infectious. Protect package from physical damage. Store at 2-8 C in a dry place. Do not freeze. Tightly closed vials, made of glass, in plastic boxes. Latest version documents on 2/5

3 8. Exposure controls/personal protection Specific control parameters: None determined. Respiratory protection: Hand protection: Eye protection: Skin protection: Hygiene measures: Use general room ventilation. None required. Protective gloves. Safety goggles. Lab coat. Good laboratory practices. Wash hands frequently. Remove and wash contaminated clothing. 9. Physical and chemical properties Physical state: Liquid. Autoflammability: Colour: Yellow to brown coloured opaque liquid. Explosive properties: Odour: No detectable odour. Oxidizing properties: ph: Vapour pressure: Boiling point: Relative density: Melting point: Solubility: Miscible with water. Flashing point: Partition coefficient: Flammability (solid, gaz): Other data: 10. Stability and reactivity Conditions to avoid: Materials to avoid: Hazardous decomposition products: Other data: Expiry date. Sodium azide may react with Pb and Cu and form dangerous material, metal azide product. Latest version documents on 3/5

4 11. Toxicological information Acute toxicity: Chronic toxicity: Inhalation: Skin contact: Eye contact: Ingestion: Other data: 12. Ecological information Mobility: Degradability: Bioaccumulative potential: Ecotoxicology: Other hazardous effects: 13. Disposal considerations Surplus or waste (residues): This reagent contains less than 0.1% of sodium azide as a preservative. As sodium azide may react with lead and copper, to form explosive metal azides, this reagent should be disposed of by flushing with copious amounts of water. The product must be disposed of as a laboratory chemical according to local regulations. Contaminated packaging: Incineration. 14. Transport information (International regulations) General information: By air (IATA): By land (ADR): By sea (IMDG): Latest version documents on 4/5

5 15. Regulatory information Symbols: R phrases: S phrases: Substances: Other regulatory requirements: Potentially biohazardous material logo on labels. In no way does this information exempt the user from knowing about or applying all the national or international regulations relating to his/her activity. 16. Other information This sheet is a complement to instructions for use but does not replace them. Information contained herewith is based on our current knowledge of the product, at the date shown, and is correct to the best of our knowledge. Furthermore, the user s attention is drawn to the dangers of using this product for anything other than its intended use. The user must accept the sole responsibility and take precautions accordingly for the use of this product. Latest version documents on 5/5