Material Safety Data Sheet

Transcription

1 Material Safety Data Sheet NFPA HMIS Personal Protective Equipment 2 Health Hazard Fire Hazard 2 See Section 15. Section 1. Chemical Product and Company Identification Common Name/ Trade Name Manufacturer Commercial Name(s) Synonym Chemical Name Sodium aluminum phosphate - acidic SPECTRUM CHEMICAL MFG. CORP S. SAN PEDRO STREET GARDENA, CA 9248 Catalog Number(s). CAS# RTECS TSCA CI# S IN CASE OF EMERGENCY CHEMTREC (24hr) Page Number: 1 TSCA 8(b) inventory: Sodium aluminum phosphate - acidic Chemical Family Chemical Formula Supplier NaAl3H14(PO4)8.4H2 SPECTRUM CHEMICAL MFG. CORP S. SAN PEDRO STREET GARDENA, CA 9248 CALL (31) Section 2.Composition and Information on Ingredients Name CAS # Exposure Limits TWA (mg/m 3 ) STEL (mg/m 3 ) CEIL (mg/m 3 ) % by Weight 1) Sodium aluminum phosphate - acidic Toxicological Data on Ingredients Sodium aluminum phosphate - acidic LD5: LC5: Section 3. Hazards Identification Potential Acute Health Effects Potential Chronic Health Effects Hazardous in case of eye contact (irritant), of ingestion, of inhalation. Slightly hazardous in case of skin contact (irritant). CARCINOGENIC EFFECTS: MUTAGENIC EFFECTS: TERATOGENIC EFFECTS: DEVELOPMENTAL TOXICITY: Repeated or prolonged exposure is not known to aggravate medical condition.

2 Sodium aluminum phosphate - acidic Page Number: 2 Section 4. First Aid Measures Eye Contact Check for and remove any contact lenses. Do not use an eye ointment. Seek medical attention. Skin Contact Serious Skin Contact After contact with skin, wash immediately with plenty of water. Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly careful to clean folds, crevices, creases and groin. Cover the irritated skin with an emollient. If irritation persists, seek medical attention. Inhalation Allow the victim to rest in a well ventilated area. Seek immediate medical attention. Serious Inhalation Ingestion Serious Ingestion Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform mouth-to-mouth resuscitation. Seek immediate medical attention. Section 5. Fire and Explosion Data Flammability of the Product Auto-Ignition Temperature Flash Points Flammable Limits Products of Combustion Fire Hazards in Presence of Various Substances Non-flammable. Explosion Hazards in Presence of Various Substances Risks of explosion of the product in presence of mechanical impact: Risks of explosion of the product in presence of static discharge: Fire Fighting Media and Instructions Fire Hazards Explosion Hazards Section 6. Accidental Release Measures Small Spill Large Spill Use appropriate tools to put the spilled solid in a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and dispose of according to local and regional authority requirements. Use a shovel to put the material into a convenient waste disposal container. Finish cleaning by spreading water on the contaminated surface and allow to evacuate through the sanitary system.

3 Sodium aluminum phosphate - acidic Page Number: 3 Section 7. Handling and Storage Precautions Storage Do not breathe dust. Avoid contact with eyes Wear suitable protective clothing In case of insufficient ventilation, wear suitable respiratory equipment If you feel unwell, seek medical attention and show the label when possible. No specific storage is required. Use shelves or cabinets sturdy enough to bear the weight of the chemicals. Be sure that it is not necessary to strain to reach materials, and that shelves are not overloaded. Section 8. Exposure Controls/Personal Protection Engineering Controls Personal Protection Personal Protection in Case of a Large Spill Exposure Limits Use process enclosures, local exhaust ventilation, or other engineering controls to keep airborne levels below recommended exposure limits. If user operations generate dust, fume or mist, use ventilation to keep exposure to airborne contaminants below the exposure limit. Splash goggles. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Gloves. Splash goggles. Full suit. Dust respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this product. Section 9. Physical and Chemical Properties Physical state and appearance Solid. (Powdered solid.) Odor Odorless. Molecular Weight ph (1% soln/water) g/mole Taste Color White. Boiling Point Melting Point Decomposes. Critical Temperature Specific Gravity Vapor Pressure Vapor Density Volatility Odor Threshold Water/Oil Dist. Coeff. Ionicity (in Water) Dispersion Properties Solubility Insoluble in cold water. Section 1. Stability and Data Stability Instability Temperature Conditions of Instability Incompatibility with various substances Corrosivity The product is stable. Non-corrosive in presence of glass.

4 Sodium aluminum phosphate - acidic Page Number: 4 Corrosivity Polymerization No. Section 11. Toxicological Information Routes of Entry Toxicity to Animals Chronic Effects on Humans Other Toxic Effects on Humans Toxicity to Animals Chronic Effects on Humans other Toxic Effects on Humans Eye contact. Inhalation. Ingestion. LD5: LC5: Hazardous in case of ingestion, of inhalation. Slightly hazardous in case of skin contact (irritant). Nuisance dust. Section 12. Ecological Information Ecotoxicity BOD5 and COD Products of Biodegradation Toxicity of the Products of Biodegradation the Products of Biodegradation Possibly hazardous short term degradation products are not likely. However, long term degradation products may arise. The products of degradation are as toxic as the original product. Section 13. Disposal Considerations Waste Disposal Section 14. Transport Information DOT Classification Identification Not a DOT controlled material (United States). Special Provisions for Transport DOT

5 Sodium aluminum phosphate - acidic Page Number: 5 Section 15. Other Regulatory Information and Pictograms Federal and State Regulations TSCA 8(b) inventory: Sodium aluminum phosphate - acidic California Proposition 65 Warnings Other Regulations Other Classifications. WHMIS (Canada) DSCL (EEC) Not controlled under WHMIS (Canada). R36- Irritating to eyes. HMIS (U.S.A.) Health Hazard Fire Hazard Personal Protection 2 E National Fire Protection Association (U.S.A.) Health 2 Flammability Specific hazard WHMIS (Canada) DSCL (Europe) TDG (Canada) ADR (Europe) Protective Equipment Gloves. Lab coat. Dust respirator. Be sure to use an approved/certified respirator or equivalent. Splash goggles.

6 Sodium aluminum phosphate - acidic Page Number: 6 Section 16. Other Information MSDS Code References Other Special Considerations S3592 Validated by Sonia Owen on 8/11/26. Verified by Sonia Owen. Printed 9/13/26. CALL (31) Notice to Reader All chemicals may pose unknown hazards and should be used with caution. This Material Safety Data Sheet (MSDS) applies only to the material as packaged. If this product is combined with other materials, deteriorates, or becomes contaminated, it may pose hazards not mentioned in this MSDS. It shall be the user's responsibility to develop proper methods of handling and personal protection based on the actual conditions of use. While this MSDS is based on technical data judged to be reliable, Spectrum Quality Products, Inc. assumes no responsibility for the completeness or accuracy of the information contained herein.