The whiter white effect pigment. Glacier Frost White

Transcription

1 The whiter white effect pigment

2 EH 682 (9S130D) * is the whitest effect pigment in today s market. This new generation of titanium dioxide coated synthetic mica has high luster and brightness and yields a whiter white appearance in many applications such as coatings, plastics and printing inks. This appealing white pearlescent pigment has a bluish reflection color to create white to black shades without the yellowish appearance of many classical and older generation synthetic mica pearlescent pigments. In addition to the whitest appearance, the new pearl pigment provides reflections of pure white brilliance. The introduction of meets a critical need for designers, architects and brand owners in the clean white and vibrant color space. Comparison between synthetic mica and natural mica synthetic mica natural mica Synthetic mica is absolutely transparent and without any natural impurities like iron oxides * not yet standardized

3

4 New styling opportunities with whiter whites in two-coat and tri-coat applications due to a bluish undertone whiter whites in injection molded and film applications neutral gray to black effect shades when combined with carbon black reflections of pure white brilliance EH 682 (9S130D) full shade over black and white Standard white mica full shade over black and white Black reduction 90 parts EH 682 (9S130D) 10 parts carbon black Black reduction 90 parts standard white mica 10 parts carbon black

5 20 µm Technical data EH 682 (9S130D) Chemical composition Fluorophlogopite % by weight TiO 2 (Rutile) SnO % by weight < 1 % by weight Physical form white powder Physical data 1 ph 7.3 (4 % aq. suspension) conductivity bulk volume 58 µs/cm (10 % aq. suspension) 0.4 l/kg density 3.00 g/cm 3 total solids > 99.5 % by weight Particle size distribution 2 d 10 9 µm d µm d µm Fastness to solvents practically insoluble in all solvents Chemical resistance HCI (2 %) no change Chemical resistance (in coatings) NaOH (2 %) no change Heat stability > 200 C FDA-approval ongoing 1 physical data determined on lot particle size distribution (Vol %) determined with Mastersizer 2000 Ver 5.11 (Malvern Instruments)

6 Contact worldwide Asia BASF East Asia Regional Headquarters Ltd. 45/F, Jardine House No. 1 Connaught Place Central Hong Kong Tel.: Fax: Europe BASF SE Coating & Plastic Chemicals Europe E-EVP/PE J Ludwigshafen Germany Tel.: Fax: Eastern Europe, Africa, West Asia BASF SE Regional Business Management Coating & Plastic Chemicals EUM/SE Europe House Ludwigshafen Germany Tel.: Fax: North America BASF Corporation 100 Campus Drive Florham Park, NJ USA Tel.: Fax: Tel.: Fax: South America BASF S.A. Av. Faria Lima andar Itaim Bibi São Paulo SP Brazil Tel.: Fax: The data contained in this publication are based on our current knowledge and experience. In view of the many factors that may affect processing and application of our product, these data do not relieve processors from carrying out their own investigations and tests; neither do these data imply any guarantee of certain properties, nor the suitability of the product for a specific purpose. Any descriptions, drawings, photographs, data, proportions, weights etc. given herein may change without prior information and do not constitute the agreed contractual quality of the product. It is the responsibility of the recipient of our products to ensure that any proprietary rights and existing laws and legislation are observed. When handling these products, advice and information given in the safety data sheet must be complied with. Further, protective and workplace hygiene measures adequate for handling chemicals must be observed. TM = trademark of BASF Group BASF SE Coating & Plastic Chemicals Ludwigshafen Germany EVP 2908 e