STANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics.
|
|
- Peter Hampton
- 5 years ago
- Views:
Transcription
1 STANDARD PRODUCT RANGE FRIAIT -DEGUSSIT High Performance Ceramics
2 TABE OF CONTENTS Electrical Engineering High Temperature Technology Surface Finishing 06 Feedthroughs 09 Tube-To-Tube Insulator 10 Standoffs 14 Tubes 18 Multi-bore tubes 19 Insulating beads 20 Protective tubes/ Multi-bore tubes for thermocouples 21 Rods, Bars, Bands 22 Crucibles 25 Boats, Combustion trays 26 Plates 28 Grinding bodies 28 Insulating powders, Cement 32 Fine grinding tools 37 Burnishing wheels CONTACT Global Sales Phone: Fax: Phone: Fax: Phone: Fax: FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
3 TOERANCES IN HIGH-TEMPERATURE TECHNOOGY The dimensional accuracy of the size of the sintered parts essentially depends on the material and the forming method. Tubes, multi-bore tubes and rods ø 3 mm as well as bands: Diameter ± 5 % (but not less than ± 0,1 mm); Cut length tolerance: ± 1 %, < 100 mm upon request; Straightness: maximum crescent height 0.5% of total length Tubes, multi-bore tubes and rods ø < 3 mm: Diameter ± 5 % (but not less than ± 0,05 mm); Cut length tolerance: ± 1 %, < 100 mm upon request; Straightness: maximum crescent height: 0.5% of total length Crucibles, boats, combustion trays: Tolerances ± 3 % (but not less ± 0,1 mm) Plates: Tolerances ± 3 % (but not less ± 0,1 mm); Deflection: maximum 0,5 % of the diagonal Insulating beads and grinding bodies: Tolerances ± 3 % (but not less than ± 0,1 mm) All dimensions in mm MATERIAS Material FRIATEC-Brand Characterisation Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 Aluminium Oxide Al 2 O 3 (+ ZrO 2 ) Aluminium Oxide, fine grain stabilized ZrO 2 Zirkonium Oxide ZrO 2 Zirkonium Oxide DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT DD57 FRIAIT FZT FRIAIT FZM DEGUSSIT FZY Pure Al 2 O 3, dense, excellent thermal and electrical resistance properties, corrosion resistant, permeable to microwaves Pure Al 2 O 3, slightly porous, good resistance to thermal shock, extremely good creep strength Pure Al 2 O 3, very porous, good thermal insulation, highest resistance to thermal shock of all the Al 2 O 3 materials Pure Al 2 O 3, dense, without any binder, red colour, wear resistant and tough, also called sintered ruby Pure Al 2 O 3, dense, extremely resistant to wear and corrosion, very high electrical insulating properties A 2 O 3 toughened with ZrO 2, dense, high strength, good resistance to thermal shock, extremely resistant to wear and corrosion, fine grain size ZrO 2 partially stabilized with MgO, dense, high strength and highly wear resistant, extremely resistant to corrosion and thermal shock Partially stabilized with Y 2 O 3, dense, high purity ZrO 2, high temperature and corrosion resistance, ion conducting for measuring oxygen FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 03
4 Available are also parts with different dimensions, in different ceramic and metal materials as well as coated parts.
5 EECTRICA ENGINEERING Feedthroughs, Tube-To-Tube Insulator, Standoffs
6 SINGE TERMINA FEEDTHROUGHS Voltage (DC) Ø M Ø D Ø F Ø J G K 1 Product No. ØM 4 kv M4 1, kv M6 2, kv M6 2,5 10, kv M8 3,8 13,5 6, Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) Fe (Ni42) (Ni42) 13 G 1 K ØJ ØF SINGE TERMINA FEEDTHROUGHS Voltage (DC) Conductor Current Ø D Ø F G K 1 2 Product No (Ni42) (Ni42) 2 G 1 K 2 kv NiFeCo 4 A 1,5x0, kv NiFeCo 5 A 1, kv NiFeCo 5 A 1, kv Cu 15 A 1, kv Ni42 5 A 1, kv Cu 15 A 1, kv Ni42 8 A kv Cu 25 A kv NiFeCo 5 A 1, kv Cu 15 A 1, kv Ni42 12 A kv Cu 40 A kv Ni42 20 A 4 10, kv Cu 60 A 4 10, kv Ni42 25 A 5 13, kv Cu 80 A 5 13, kv Cu 120 A 8 19, Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØF 06 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
7 SINGE TERMINA FEEDTHROUGHS Voltage (DC) Conductor Current Ø D Ø F G Ø K 1 2 Product No. 1 kv Ni42 4 A 1,5x0,25 4 2,8 35 4, kv Ni42 5 A 1,5 4 2,8 35 4, kv Cu 5 A 1,5 4 2,8 35 4, kv Ni42 30 A 7,5x0, kv Cu 90 A 7,5x0, Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØK (Ni42) G (Ni42) 2 ØF SINGE TERMINA FEEDTHROUGHS Voltage (DC) No. of Flutes eakage Path Ø M Ø D Ø F Ø A Ø A1 G K K1 2 Product No. 25 kv 3 54 M6 2, This feedthrough could be adjusted with different conductors for special electrical standards Also available with welded-on flanges (CF, KF, etc.) ØA ØM Fe (Ni42) 10,4 G K (Ni42) K1 Ø13 ØA1 ØF FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 07
8 SINGE TERMINA FEEDTHROUGHS Voltage (DC) No. of Flutes eakage Path Ø M Ø D Ø F Ø A Ø A1 G K1 2 Product No. Fe (Ni42) ØA M kv M8 3,8 88, , Order-related manufacture This feedthrough could be adjusted with different conductors for special electrical standards Also available with welded-on flanges (CF, KF, etc.) G (Ni42) 6.4 K1 Ø36 ØA1 ØF MUTITERMINA FEEDTHROUGHS Voltage (DC) Current Ø D Ø A Ø G Ø J 1 2 No. of Feedthroughs Product No. ØG 500 V Pin-Pin 4 A 1,5x0, ,2 15, kv Pin-Flange Order-related manufacture Feedthrough are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØM (Ni42) (Ni42) 2 1 ØJ 5x72 ØA FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
9 MUTITERMINA FEEDTHROUGHS Voltage (DC) Current Ø D Ø F Ø J G 1 2 No. of Feedthroughs Product No. 500 V Pin-Pin 1 kv Pin-Flange 4 A 1,5x0, , V Pin-Pin 1 kv Pin-Flange 4 A 1,5x0, , Feedthroughs are also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØF (Ni42) (Ni42) 2 G ØJ TUBE-TO-TUBE INSUATORS Voltage (DC) Ø F Ø A Ø J G Product No. 5 kv 8x6 13, Tube-To-Tube Insulator is also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØF (NiCo2918) G (Ni42) (NiCo2918) 8 ØJ ØA TUBE-TO-TUBE INSUATORS Voltage (DC) Ø F Ø A Ø J G Product No. 15 kv Tube-To-Tube Insulator is also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) ØA ØF (CrNiFe) (Ni42) 15 G 15 ØJ FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 09
10 TUBE-TO-TUBE INSUATORS Voltage (DC) No. of Flutes eakage Path Ø F Ø A Ø J G Product No. 15 kv Tube-To-Tube Insulator is also available in other dimensions Also available with welded-on flanges (CF, KF, etc.) STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 15 kv Standoff is also available in other dimensions Ø14 M (Ni42) (Ni42) 10 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
11 STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 40 kv Customized parts with different lengths, different diameters or different number of flutes are also available Ø14 M (Ni42) (Ni42) 1 STANDOFFS Voltage (DC) eakage Path Ø D 1 Product No. 10 kv 25 7, kv 38 9, Standoffs are also available in other dimensions (Cu) (Cu) 1 M3 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 11
12 Available are also parts with different dimensions and in different ceramic materials.
13 HIGH TEMPERATURE TECHNOOGY Tubes, Rods, Multi-Bore Tubes, Bands, Crucibles, Discs, Plates, Boats, Combustion Trays, Grinding Pieces, Insulating powders, Cement
14 TUBES DEGUSSIT A24 Ød Ø D Ø d max. Product No. 3 1, Ø D Ø d max. Product No. DEGUSSIT A ARGE-DIAMETER TUBES Ø D Ø d max. Product No. Ød Order-related manufacture 14 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
15 TUBES - ONE END COSED Ø D Ø d max. Product No. 3 1, * * * * * * DEGUSSIT A24 Ød Ø D Ø d max. Product No. DEGUSSIT A * standard size for thermocouple (see chapter: protective tubes for standard length one end closed) Available with flange (Surcharge: +10% of Price per Metre) FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 15
16 THIN INSUATING TUBES Ø D Ø d max. Product No. 0,5 0, ,6 0, ,8 0, Ød 1 0, , ,1 0, ,2 0, ,5 0, , ,6 0, ,7 1, , , , ,5 1, ,7 1, ,8 2, TUBES - THIN WAED Ø D Ø d max. Product No Ød FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
17 TUBES FOR OXYGEN SENSORS Ø D Ø d max. Product No. DEGUSSIT FZY Order-Related Product Ød TUBES FOR OXYGEN SENSORS - ONE END COSED Ø D Ø d max. Product No. DEGUSSIT FZY Order-Related Product Ød RECTANGUAR TUBES B H Wall Thickness max. Product No , , Order-Related Product B H RIBBED TUBES Ø D Ø d max. Thread breadth Thread depth Thread pitch Product No Ød FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 17
18 MUTI-BORE TUBES - ROUND on request with notch Ø D Ø d Number of bores max. Product No. 0,9 0, ,2 0, ,2 0, ,55 0, , , ,35 0, ,5 0, ,8 0, , , * 4 0, * 4 1, , ,5 1, * 6 1, * 8 0, , , * 8,5 1, * * standard size for thermocouple (see chapter: multi-bore tubes for standard-length thermocouples) MUTI-BORE TUBES - OVA on request with notch B H Ø d Number of bores max. Product No ,9 0, ,4 0, ,5 0, ,2 1, FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
19 INSUATING BEADS Ø D Ø d Product No. 3, , , , , Packing unit: 100 pcs. Ød INSUATING BEADS Ø D Ø d Number of bores Product No. 4 0, , , , Packing unit: 100 pcs. FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 19
20 PROTECTIVE TUBES FOR STANDARD-ENGTH THERMOCOUPES ONE END COSED DEGUSSIT A24 Ød Ø D Ø d max. Product No Ø D Ø d max. Product No. DEGUSSIT A MUTI-BORE TUBES FOR STANDARD-ENGTH THERMOCOUPES Ø D Ø d Number of bores max. Product No. 4 0, , , , ,5 1, ,5 1, THERMOCOUPES DEGUSSIT A24 Protective tubes and bore tubes 3 ength outer protective tube 1 ength inner protective tube 2 ength bore tube For a standard thermocouple with an outer protective tube 180 you need an inner protective tube 200 and bore tube FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
21 RODS Ø D max. Product No. 0, , , , , , , Ø D max. Product No. BARS Tolerances Diameter: +1 / +4 mm ength: +/- 5 mm Deflection: max. 0,5 % of the total lenght Order-Related Product B H max. Product No. BANDS Order-Related Product B H FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 21
22 CRUCIBES - CYINDRICA, FAT BASE DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT FZY 1 2 Ø D1 Ø D2 H Approx. Vol. ml Product No , H Ø D1 Ø D2 H Approx. Vol. ml Product No. DEGUSSIT A Ø D1 Ø D2 H Approx. Vol. ml Product No. DEGUSSIT A , , Ø D1 Ø D2 H Approx. Vol. ml Product No. DEGUSSIT FZY Order-Related Product 22 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
23 CRUCIBES CONICA HIGH FORM Ø D1 Ø D2 Ø D3 H Approx. Vol. ml Product No DEGUSSIT FZY Ø D1 Ø D2 Ø D3 H Approx. Vol. ml Product No. DEGUSSIT FZY Order-Related Product 3 H CRUCIBES CONICA WIDE FORM Ø D1 Ø D2 Ø D3 H Approx. Vol. ml Product No H 3 CRUCIBES - CYINDRICA, ROUND BASE Ø D1 Ø D2 H Approx. Vol. ml Tammann No. Product No I a I b I c II a II b II c III a III b III c ,070 IV a Tammann H FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 23
24 SIP-ON CRUCIBES Approx. Vol. ml Product No Order-Related Product Ø5 Ø4 0, Ø2 Ø4 SIP-ON CRUCIBES Approx. Vol. ml Product No Order-Related Product Ø 17 Ø 16 R 8 R Ø 2,5 Ø 3,6 SIP-ON CRUCIBES Approx. Vol. ml Product No Order-Related Product Ø8 Ø6 ( 15 ) 0,6 6 8,4 8 6 Ø2,55 Ø4,3 24 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
25 BOATS B H W Approx. Vol. ml Product No , , , B W H COMBUSTION TRAYS B H W Approx. Vol. ml Product No B H W Approx. Vol. ml Product No. DEGUSSIT A B DEGUSSIT A24 DEGUSSIT A25 DEGUSSIT FZY H B H W Approx. Vol. ml Product No. DEGUSSIT A * W B H W Approx. Vol. ml Product No. DEGUSSIT FZY Order-Related Product * W conical FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 25
26 PATES - ROUND DEGUSSIT A25 Ø D H Product No PATES - ROUND WITH HOE Ø D H Product No. DEGUSSIT A Plates sizes of plates up to approx. Ø 350 x 20 upon request Ø D1 Ø D2 H Product No Plates sizes of plates up to approx. Ø 350 x 20 upon request 26 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
27 PATES - RECTANGUAR B H Product No DEGUSSIT A25 FRIAIT FZM H B H Product No. DEGUSSIT A B B H Product No , , , B H Product No. FRIAIT FZM , Plates sizes of plates up to approx. 700 x 350 x 20 upon request FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 27
28 GRINDING BODIES Ø D H pcs./l pcs./kg kg/l Product No , , , , , INSUATING POWDER - CACINED Aluminium oxide Al 2 O 3 >99,5 % Type Crystal size Product No. VM 99% < 10 µm Primarily for electrical insulation of cathode heaters and as fillers of casting resins. INSUATING POWDER - FUSED Aluminium oxide Al 2 O 3 >99,7% Type Crystal size Product No. E No. 100 ~ 150 µm E No. 250 ~ 40 µm Primarily in dry filling for thermal insulation of electrical furnaces. CEMENT Aluminium oxide A 2 O 3 >95% Type Crystal size Product No. A2O3 ~ 150 µm For sealing thermocouples in furnace linings, embedding heating coils or platinum crucibles, etc. The cement is diluted with water to the required consistency. Since it is not cold-hardening, it contains 0.5% organic binder in order to increase its dry strength. This binder is burned off completely during the heating process. Above 1200 C progressive hardening of the cement begins, as a result of sintering. 28 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
29 Ø D Product No. PRECISION BAS Quality: Grade 25, polished surface Sphericity: 0,6 µm Diameter Tolerance: 2,5 µm 1, , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 29
30 Available are also parts with different dimensions and in different ceramic materials.
31 SURFACE FINISHING Fine Grinding Tools, Burnishing Wheels
32 FINE-GRINDING TOO - BENCHSTONE DEGUSSIT DD57 DEGUSSIT A24 Dimensions Colour Type Product No. DEGUSSIT DD x 25 x 10 ruby red fine x 25 x 10 ruby red medium x 25 x 15 ruby red fine x 25 x 15 ruby red medium x 50 x 12 ruby red fine x 50 x 12 ruby red medium Dimensions Colour Type Product No. DEGUSSIT A x 25 x 10 white coarse x 25 x 15 white coarse FINE-GRINDING TOO - BENCHSTONE IN WOODEN CASE, REMOVABE DEGUSSIT DD57 Dimensions Colour Type Product No. 120 x 50 x 10 ruby red fine / medium FINE-GRINDING TOO - BENCHSTONE IN WOODEN CASE, GUED IN DEGUSSIT DD57 DEGUSSIT A24 Dimensions Colour Type Product No. DEGUSSIT DD x 25 x 10 ruby red fine x 25 x 10 ruby red medium x 50 x 10 ruby red fine x 50 x 10 ruby red medium x 50 x 12 ruby red fine x 50 x 12 ruby red medium FINE-GRINDING TOO - TRIANGUAR Dimensions Colour Type Product No. DEGUSSIT A x 25 x 10 white coarse DEGUSSIT DD57 Dimensions Colour Type Product No. 100 x 4 ruby red fine x 4 ruby red medium x 6 ruby red fine x 6 ruby red medium x 6 ruby red coarse x 8 ruby red fine x 8 ruby red medium x 8 ruby red coarse x 10 ruby red fine x 10 ruby red medium x 10 ruby red coarse x 13 ruby red fine x 13 ruby red medium x 13 ruby red coarse FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
33 FINE-GRINDING TOO - RECTANGUAR Dimensions Colour Type Product No. DEGUSSIT DD x 6 x 3 ruby red fine x 6 x 3 ruby red medium x 8 x 6 ruby red fine x 8 x 6 ruby red medium x 8 x 6 ruby red coarse FINE-GRINDING TOO - SQUARE Dimensions Colour Type Product No. DEGUSSIT DD x 4 ruby red fine x 4 ruby red medium x 6 ruby red fine x 6 ruby red medium x 6 ruby red coarse x 8 ruby red fine x 8 ruby red medium x 8 ruby red coarse x 10 ruby red fine x 10 ruby red medium x 10 ruby red coarse x 13 ruby red fine x 13 ruby red medium x 12 ruby red coarse FINE-GRINDING TOO - SEMI-CIRCUAR Dimensions Colour Type Product No. DEGUSSIT DD x 10 ruby red medium x 10 ruby red coarse FINE-GRINDING TOO - CIRCUAR Dimensions Colour Type Product No. DEGUSSIT DD x 4 ruby red fine x 4 ruby red medium x 6 ruby red fine x 6 ruby red medium x 6 ruby red coarse x 8 ruby red fine x 8 ruby red medium x 8 ruby red coarse x 10 ruby red fine x 10 ruby red medium x 10 ruby red coarse FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 33
34 ASSORTMENT OF FIES DEGUSSIT DD57 Type Product No. Assortment Shape Dimensions Colour Type Product No. ASSORTMENT OF FIES - MIDGET FIES 100 x 10 ruby red medium x 10 ruby red medium x 8 x 6 ruby red coarse x 6 ruby red medium x 10 ruby red coarse The assortment of files, Product No , contains one of each file listed above. The Files are also available separately DEGUSSIT DD57 Type Product No. Assortment BADE SHARPENER Shape Dimensions Colour Type PU pcs. Product No. 50 x 2 ruby red fine x 3 ruby red fine x 1 ruby red fine x 2 ruby red fine x 3 x 0,3 ruby red fine x 1 ruby red fine x 2 ruby red fine x 3 ruby red fine x 4 ruby red fine x 5 x 1,5 ruby red fine x 4 x 1,5 ruby red fine The assortment of midget files, Product No , contains 1 holder and 2 collets as well as one of each midget file listed above. PU= packing unit The files are also available separately DEGUSSIT DD57 Dimensions Colour Type Product No. 10 x 200 ruby red fine FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
35 FINE-GRINDING TOO - BADE Dimensions Colour Type Product No. DEGUSSIT DD x 15 x 3/0,5 ruby red fine x 15 x 3/0,5 ruby red medium FINE-GRINDING TOO - TAPERED Dimensions Colour Type Product No. DEGUSSIT DD x 30 x 7/2 ruby red medium FINE-GRINDING TOO - RHOMBOID Dimensions Colour Type Product No. DEGUSSIT DD x 13 x 5 ruby red coarse FINE-GRINDING TOO - CONICA Dimensions Colour Type Product No. DEGUSSIT DD x 5 x 2 ruby red fine x 5 x 2 ruby red coarse FINE-GRINDING TOO - PENCI Dimensions Colour Type Product No. DEGUSSIT DD x 5 ruby red fine FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 35
36 FINE-GRINDING TOO - MOUNTED POINT, CYINDRICA DEGUSSIT DD57 Ø D1 Ø D2 H Type Product No fine fine fine fine fine fine fine fine fine fine fine medium medium medium medium medium medium medium medium medium medium medium Order-Related Product FINE-GRINDING TOO - MOUNTED POINT, CYINDRICA-CONICA DEGUSSIT DD57 point angle 60 Ø D1 Ø D2 H Type Product No fine fine fine fine fine fine medium medium medium medium medium medium ength of the shaft 30 upto 35 mm Ø D1: Ceramics Ø D2: Metal Shaft H: Ceramics Order-Related Product 36 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
37 FINE-GRINDING WHEES Ø D1 Ø D2 B Design Product No with metal bushing with metal bushing with metal bushing with metal bushing with metal bushing with metal bushing with metal bushing without metal bushing without metal bushing without metal bushing without metal bushing without metal bushing without metal bushing without metal bushing Order-Related Product Profile 2 and 3 upon request 1 2 DEGUSSIT DD57 fine B BURNISHING WHEES Ø D1 Ø D2 Ø D3 a Product No Order-Related Product DEGUSSIT DD57 fine a 12 BURNISHING WHEES Ø D1 Ø D2 Ø D3 a Product No Order-Related Product 1 2 DEGUSSIT DD57 fine 3 a FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 37
38 COMPETENCE PUS RESPONSIBIITY Our customers rightly expect first-class performance with lasting value. Besides the competence to achieve this, we also undertake the responsibility for it. Ask for the evidence: FRIATEC is the technological and market leader in ceramic materials for the 21st Century Image-intensifier for radiology X-Ray tube for radiology 14 Isolator for the printing industry Guide strip for the printing industry 03 Pressure sensor for aerospace 15 Square tubes for the printing industry 04 Camera housing for aerospace 16 Tubes, rods and capillaries for high temperature applications 05 Accelerator tube for radiologye 17 Thermal protection tubes for the glass and metallurgical industries 06 Feedthroughs for high-vacuum applications 18 Crucibles and boats for industry and research 07 High-voltage feedthroughs for vacuum technology 19 FZY-probes for oxygen measurement in gases 08 Insulating tubes for high-vacuum technology 20 Dielectric elements for fuel cells 09 High current feedthroughs for energy systems Wafer carrier for the semiconductor industry 22 Thermal protection tubes for high temperature applications Dielectric elements for fuel cells 11 Test plates for the semiconductor industry 23 Shaping roller for the glass industry 12 Sensor elements for the semiconductor industry 24 Glow-block for heat treatment of lamp filaments 38 FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range
39 Electrical Engineering High Temperature Technology Mechanical Engineering Surface Finishing Ozone generator for the semiconductor industry 37 Stirrers for the chemical industry 26 Control discs for production and laboratory processes 38 High-pressure pump piston for the chemical industry 27 Dosing pistons with control edge for the food-processing and 39 Adhesive nozzle for the paper industry pharmaceutical industries 40 Valve disc for pulp-processing 28 Pump inserts for medical technology Float body for flow-measurement in the chemical industry 42 Protection tubes for the glass industry Vacuum plate for paper-making 30 Electrode holder for flow-measurement in the chemical industry 43 Midget file for the glass-processing industry Hand lappers for the glass-processing industry Flow meters for the food-processing industry 32 Welding pins for automotive-body manufacture 45 Grinding wheel for the glass-processing industry 33 Centring pin for automotive-body manufacture 46 Grinding tools for metal working 34 Metal-forming tools for automotive-body manufacture 47 Bench-stones for metal working 35 Isolation shells for magnetically-coupled pump in the chemical industry 48 Mounted points for metal working 36 Pump impeller for the chemical industry FRIAIT -DEGUSSIT High Performance Ceramics - Standard Product Range 39
40 FRIATEC Aktiengesellschaft - Ceramics Division Steinzeugstrasse Mannheim (Germany) Tel info-frialit@friatec.de B
STANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics.
STANDARD PRODUCT RANGE FRIAIT -DEGUSSIT High Performance Ceramics www.friatec.com CONTACT Global Sales Phone: +49 621 486-1353 Fax: +49 621 486-25 1353 Phone: +49 621 486-1240 Fax: +49 621 486-25 1240
More informationSTANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics.
STANDARD PRODUCT RANGE FRIAIT -DEGUSSIT High Performance Ceramics www.friatec.com CONTACT Global Sales Phone: +49 621 486-1353 Fax: +49 621 486-25 1353 Phone: +49 621 486-1240 Fax: +49 621 486-25 1240
More informationSTANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics. www-friatec-ceramics.com
STANDARD PRODUCT RANGE FRIAIT -DEGUSSIT High Performance Ceramics www-friatec-ceramics.com CONTACT Marc erenard Phone: +33 (0)1 85 78 38 04 Email: marc.lerenard@eu.umicore.com MATERIAS Material FRIATEC-Brand
More informationSTANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics.
STANDARD PRODUCT RANGE FRIAIT -DEGUSSIT High Performance Ceramics www.friatec.com CONTACT Global Sales Phone: +49 621 486-1353 Fax: +49 621 486-25 1353 Phone: +49 621 486-1240 Fax: +49 621 486-25 1240
More informationSTANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics.
STANDARD PRODUCT RANGE FRIAIT -DEGUSSIT High Performance Ceramics www.friatec-ceramics.com CONTACT Marc erenard Phone: +33 (0)1 85 78 38 04 Email: marc.lerenard@eu.umicore.com MATERIAS Material FRIATEC-Brand
More informationElectrical Engineering High Temperature Technology Surface Finishing 32 39
Electrical Engineering 02 11 High Temperature Technology 12 31 Surface Finishing 32 39 FRIAIT -DEGUSSIT Oxide Ceramics Electrical Engineering Ceramic-Metal Assemblies Metallised Ceramics SINGE TERMINA
More informationSTANDARD PRODUCT RANGE. FRIALIT -DEGUSSIT High Performance Ceramics.
STANDARD PRODUCT RANGE FRIALIT -DEGUSSIT High Performance Ceramics www.friatec-ceramics.com CONTACT Marc Lerenard Phone: +33 (0)1 85 78 38 04 E-mail: marc.lerenard@eu.umicore.com MATERIALS Material FRIATEC-Brand
More informationFRIALIT -DEGUSSIT Oxide Ceramics. Materials, Applications and Properties
-DEGUSSIT Oxide Ceramics Materials, Applications and Properties Team and Application Areas 02 03 Materials and Typical Applications 04 05 Material Properties 06 07 Team and Application Areas -DEGUSSIT
More informationFRIALIT -DEGUSSIT Oxide Ceramics. Materials, Applications and Properties
- Oxide Ceramics Materials, Applications and Properties Team and Application Areas 02 03 Materials and Typical Applications 04 05 Material Properties 06 07 Team and Application Areas - Oxide Ceramics
More informationFRIALIT -DEGUSSIT Oxide Ceramics. Applications Spectrum
FRIALIT -DEGUSSIT Oxide Ceramics Applications Spectrum Electrical Engineering 02 13 High Temperature Technologies 14 23 Mechanical Engineering 24 35 Surface Finishing 36 41 Overview 42 43 Contacts 44
More informationPositioning and welding pins. FRIALIT -DEGUSSIT High-Performance Ceramics.
Positioning and welding pins FRIALIT -DEGUSSIT High-Performance Ceramics www.friatec.de LOW COSTS HIGH QUALITY IN CAR BODY CONSTRUCTION Renowned automobile manufacturers use positioning and welding pins
More informationHIGH-TEMPERATURE TECHNOLOGY. Components made of FRIALIT -DEGUSSIT High-Performance Ceramics.
HIGHTEMPERATURE TECHNOLOGY Components made of FRIALIT DEGUSSIT HighPerformance Ceramics www.friatec.com/ceramics FRIALIT DEGUSSIT HIGHTEMPERATURE TECHNOLOGY INVENTIVE, EXPERIENCED, SUCCESSFUL The quality
More informationSPACER CANS FOR THE PUMP INDUSTRY. FRIALIT -DEGUSSIT High-Performance Ceramics.
SPACER CANS FOR THE PUMP INDUSTRY FRIALIT -DEGUSSIT High-Performance Ceramics www.friatec.com/ceramics FRIALIT -DEGUSSIT SPACER CANS WEAR- AND CORROSION RESISTANT The current development of state-of-the-art
More informationThermocouples Straight Design Model TC501, for Flue Gas Measurement
Electrical Temperature Measurement Thermocouples Straight Design Model TC501, for Flue Gas Measurement WIKA Data Sheet TE 65.30 Applications T Blast furnaces, air heaters T Red-heat and heat treatment
More informationVacuum Technology VaKuumtechnik. Laser technology Lasertechnik. Measurung technology Messtechnik
Vacuum Technology VaKuumtechnik Laser technology Lasertechnik Measurung technology Messtechnik History With over 100 years history, LAPP Insulators delivers power supply around the world. Beeing technology
More informationHALDENWANGER Ceramics for Kilns
Ceramics for Kilns CONTENTS I N T R O D U C T I O N 3 SIGNIFICANCE of ceramics for kiln construction and furniture M A T E R I A L S 4-5 SUMMARY of our ceramic materials 6-7 8 9 INSULATION COMPOUNDS REFRACTORY
More informationMicro CIM for Precision Instruments and Medical Applications. SmartManufacturingSeries.com
Micro CIM for Precision Instruments and Medical Applications SmartManufacturingSeries.com Outline Discussion of micro-scale ceramic injection molding experience Introduction to CIM Case Studies Conclusions
More informationBRUSHES WITH SHANK 62 63
6 6 Wheel Brushes with Shank Knot Wheel Brushes with Shank Ø 6 mm D A H Z R RPM Pack. STH 0.5 0.0 STH 0.50 0.00 ROH 0.50 0.00 mm inch mm inch mm inch max. Art.-No. Art.-No. Art.-No. 75 9 /8 5 5/8 8 5,000
More informationGRAPHITE INDIA LIMITED
GRAPHITE INDIA LIMITED SPECIALITY DIVISION Uniquely special... CORPORATE PROFILE Incorporated in 1963 with Technical Collaboration with M/s. Great Lakes Carbon Corporation, USA. GIL Today is one among
More informationKeep in shape when the heat is on. Kanthal APMT for strength and corrosion resistance at extreme temperatures
Keep in shape when the heat is on Kanthal APMT for strength and corrosion resistance at extreme temperatures Superior performance when the heat is on When furnace temperatures reach as high as 1250 C (2282
More informationA Brilliant Idea behind Every Product.
A Brilliant Idea behind Every Product. www.lappinsulators-alumina.com Ceramic-to-metal Joints Metal Sleeve Brazing Solder Al 2 O 3 - ceramic Ceramic-to-metal Parts with Multifunctional Benefits Ceramic-to-metal
More informationVDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
More informationKnot Wheel Brushes WHEEL BRUSHES
W HE E L B RU S H E S 4 5 Knot Wheel Brushes Knot Wheel Brushes Knot wheel brushes for grinders, angle grinders and stationary machines used in the preparation and reworking of bolt fillet and butt welds.
More information> RX12UF. Cobalt content w/w. Grade. Properties and recommendations. HARTMETALL ESTECH AG 6285 Hitzkirch
pli > Ultra-fine grain carbides are characterized by a very high hardness and wear resistance. They are used for milling tools and drills for processing abrasive, soft and tough materials, in nozzles and
More informationD.0. Thermocouple. Introduction
D.0 Introduction Description s are widely used to measure the temperature inside a vacuum or pressure chamber. CeramTec s thermocouple feedthroughs, manufactured with thermocouple materials or compensating
More informationSINGLE CRYSTAL SAPPHIRE
SINGLE CRYSTAL SAPPHIRE Single Crystal Sapphire plays an everincreasingly important role as a material for high reliability Opto-Electronics today due to excellent mechanical characteristics, chemical
More informationTECHNICAL CERAMICS.
2018 Specialty Aluminas FOR TECHNICAL CERAMICS www.alteo-alumina.com markets & applications Alumina is one of the most important oxide materials for technical ceramics and is used in a wide range of applications.
More informationisd dunaferr Product catalogue
isd dunaferr Product catalogue COLD BENT STEEL SECTIONS (Open and hollow) Cold bent steel sections are produced from slit coils by continuous roller bending, using section-shaped pairs of rolls mounted
More informationFRIALIT -DEGUSSIT HIGH-PERFORMANCE CERAMICS SLIDE & ROLLING BEARINGS. Full ceramic or hybrid bearings.
FRIALIT -DEGUSSIT HIGH-PERFORMANCE CERAMICS SLIDE & ROLLING BEARINGS Full ceramic or hybrid bearings www.aliaxis-ui.se 202 INDEX Introduction 0405 Bearings in general 0607 Characteristics of high performance
More informationCordierite. Low Thermal Expansion Ceramic
Cordierite Low Thermal Expansion Ceramic Our strength wide variety of customized ceramic materials KYOCERA it all started with ceramics Our first product was a U-shaped ceramic insulator used in early
More informationJAI Engineers UK Limited. Advanced Technical Ceramic Precision Products
Advanced Technical Ceramic Precision Products JAI Engineers UK Ltd. JAI Pumping Technologies Ltd. JAI ENGINEERS UK LIMITED JAI PUMPING TECHNOLOGY LIMITED JAI Engineers UK Ltd. JAI Pumping Technologies
More informationMasterflex Polishing Products
Masterflex Polishing Products How to Order Masterflex Polishing Products When ordering it is important to give as much information about the operation as possible so that the correct grading is supplied.
More informationKBM Corporation Introduction. KBM treasures the trust with customers and has been trying to give the highest satisfaction to customers.
KBM Corporation Introduction KBM treasures the trust with customers and has been trying to give the highest satisfaction to customers. Company Outline KBM General Profile Domestic and foreign subsidiaries
More informationSpecial Electrically Resistant Heated Furnaces
Special Electrically Resistant Heated Furnaces Drying of Ceramic Components Autor: Roland Waitz, Malte Möller Many ceramic masses are fabricated in plastic or liquid condition by addition of water. In
More informationD.0. Thermocouple. Introduction
D.0 Introduction Description s are widely used to measure the temperature inside a vacuum or pressure chamber. CeramTec s thermocouple feedthroughs, manufactured with thermocouple materials or compensating
More informationMECHANICAL ENGINEERING. Components made of FRIALIT -DEGUSSIT High-Performance Ceramics.
MECHANICAL ENGINEERING Components made of FRIALIT DEGUSSIT HighPerformance Ceramics www.friatec.com/ceramics FRIALIT DEGUSSIT HIGHPERFORMANCE CERAMICS MEETING THE HIGHEST REQUIREMENTS In mechanical engineering,
More informationTemperature sensors for automotive applications
Temperature sensors for automotive applications When the precise measurement of temperature is a critical aspect to the safety of a process, the importance of precision quality thermocouple material is
More informationAbrasive & Polishing Sticks, Grinding Wheels
A COMPANY Content Abrasive & Polishing Sticks, 8 Abrasive & Mounted Points...2 Diamond Grinding Points...7...15 Grinding Pins...19 Abrasive Caps, Belts, Discs & Carriers...24 www.dmeeu.com - 1 - SCHL 1400...
More informationThermocouple for Flue Gas Temperature Measurements,
Electrical Temperature Measurement Thermocouples for Flue Gas Temperature Measurements Model TC81 with Thermowell Model TW81 WIKA Data Sheet TE 65.81 Applications Blast furnaces, air heaters Red-heat and
More informationApplication of the Optical Floating Zone Apparatus for Researching Material Sciences. Part-1
Technical Report -2 Application of the Optical Floating Zone Apparatus for Researching Material Sciences Part-1 Practice of Single Crystal Growth Using Optical Floating Zone Furnaces CrystalSystemsCorp.
More informationIs there a quality difference between seamless and welded tube for clean and ultra-clean applications? By Cor Tiele
Is there a quality difference between seamless and welded tube for clean and ultra-clean applications? By Cor Tiele www.bpe-technology.com Introduction In the Semiconductor, Biotech and Pharmaceutical
More informationPrecision Mounted Points
Precision Mounted Points Solutions for Industry www.master-abrasives.co.uk Introduction Master Abrasives The MASTER brand is known internationally as a high-quality brand of abrasives, tools and consumables
More informationFeatures & Grade. ZrO2. Base Material. Micro Structure (X5000) TaeguTec Ceramic Wear. Features and application AW AW10-960
& Grade TaeguTec Ceramic Wear SiC ZrO2 AC1 AS2 AS7 AB3-998 - 99-96 Base Material Grade and application Micro Structure (X5) Density g/cm 3 3.18 3.4 3.5 2.4 4.25 6.5 5.7 3.98 3.85 3.7 Hardness HV 25 16
More informationDevelopment of the High Voltage Bushing for the ITER NBI
J. Plasma Fusion Res. SERIES, Vol. 9 (2010) Development of the High Voltage Bushing for the ITER NBI Hiroyuki TOBARI, Takashi INOUE, Masayuki DAIRAKU, Naotaka UMEDA, Mieko KASHIWAGI, Masaki TANIGUCHI,
More informationProduct information. UP-DO Pump Series Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.
Product information Normal priming, centrifugal pumps with a double mechanical seal material: stainless steel 1.4581 Description Normal priming centrifugal pumps with a double Mechanical seal Application:
More informationCOMPONENTS, ASSEMBLIES, STANDARD PRODUCTS HIGH-PERFORMANCE CERAMICS AND ENGINEERING PLASTICS FOR GENERAL MECHANICAL ENGINEERING GERMAN ENGINEERING
COMPONENTS, ASSEMBLIES, STANDARD PRODUCTS HIGH-PERFORMANCE CERAMICS AND ENGINEERING PLASTICS FOR GENERAL MECHANICAL ENGINEERING GERMAN ENGINEERING 1 THERE ARE MATERIALS THAT ONE DOESN'T THINK OF IMMEDIATELY...
More informationSynthetic and Natural Graphite
Synthetic and Natural Graphite The relative applications and fundamentals of the synthetic ti and natural graphite markets Tom Burkett Vice President GMS SGL Group Industrial Minerals Graphite & Graphene
More informationGRINDING AND OTHER ABRASIVE PROCESSES
GRINDING AND OTHER ABRASIVE PROCESSES Grinding Related Abrasive Process Abrasive Machining Material removal by action of hard, abrasive particles usually in the form of a bonded wheel Generally used as
More informationFLEXIBLE AND SEMI-FLEXIBLE ABRASIVES
FLEXIBLE AND SEMI-FLEXIBLE ABRASIVES FLEXIBLE AND SEMI- FLEXIBLE ABRASIVES 119 Fibre discs for use on angle grinders Derusting, deburring, removal. DRONCO fibre discs are excellent for all abrasive
More informationResistance Temperature Detectors Mineral Insulated Thermocouples Thermoelements, Accessories and Service All-round supplier
Resistance Temperature Detectors Mineral Insulated Thermocouples Thermoelements, Accessories and Service All-round supplier of temperature sensors and component parts for all industrial applications Manufactured
More informationPolishing-, Ceramic Stones & Accessories
Polishing-, Ceramic Stones & Accessories 5 a company A COMPANY Content Polishing-, Ceramic Stones & Accessories 5 Polishing-, Ceramic Stones & Accessories Polishing Stones...2 Ceramic Stones...16 Super
More informationCOMPETENCE IN CERAMICS
COMPETENCE IN CERAMICS MATERIALS ZrO 2 Zirconia ZrO 2 is the candidate high-performance material among oxide ceramics. ZrO 2 shows excellent bending strength and fracture toughness behaviour and therefore
More informationFW SERIES. Friction welding machine SH-FW30/45/60 SHENG HUI. .Fully automated production line: -Increase production -Reduce manpower
FW SERIES Friction welding machine SHENG HUI SH-FW30/45/60.Fully automated production line: -Increase production -Reduce manpower.after welding, the strength is higher than that of the base metal, and
More informationRobust flue gas probes for industrial emissions measurements.
Robust flue gas probes for industrial emissions measurements. For reliable measurements using testo 340 and testo 350, even in the harshest of conditions. Robust flue gas probes for industrial emissions
More informationThermocouple Reference Table
Thermocouple is the description for electrical feedthroughs that are commonly used for temperature measurement systems. A thermocouple feedthrough does not measure temperature, but rather it is used to
More informationThe Element Carbon. Diamond & Derivates. Fullerene & Nanotubes. Graphite & Derivates
The Element Carbon 6 C 12.01 Diamond & Derivates Graphite & Derivates Fullerene & Nanotubes SGL Group 2007: Sales: 1373 mio. Employees: 5862 Net profit: 131 mio. R&D costs: 30 mio. Supplier (Gr. Powder...)
More informationThe Convenience Stores For Metal
STEEL BARS Data and Specifications C1018 Cold Finished Bar A low carbon steel with medium manganese content. Applications: Cold forming and bending operations (for severe bends stress relieving may be
More informationSSAB water mains. A reliable and economically advantageous solution for water supply.
SSAB water mains A reliable and economically advantageous solution for water supply www.ssab.com/infra SSAB S SYSTEM OF WATER MAINS DISTRIBUTES CLEAN WATER SAFELY A system made up of steel water mains
More informationRESISTANCE HEATING ALLOYS AND SYSTEMS FOR INDUSTRIAL FURNACES PRODUCT OVERVIEW
RESISTANCE HEATING ALLOYS AND SYSTEMS FOR INDUSTRIAL FURNACES PRODUCT OVERVIEW 2 RESISTANCE HEATING ALLOYS AND SYSTEMS FOR INDUSTRIAL FURNACES CONTENT METALLIC HEATING ELEMENTS FROM SANDVIK 4 KANTHAL OR
More informationPlastCoat PC 15. The compact one. Interior and exterior plaster spraying with easy to use technology.
PlastCoat PC 15 The compact one Interior and exterior plaster spraying with easy to use technology. With their plaster spraying units Wagner have made it easier to get into the machine-assisted application
More informationPlastCoat PC 25/ PC 35
PlastCoat PC 25/ PC 35 The powerful ones Plaster spraying indoors and out with equipment geared to practical use. Quality Offensive! With their plaster spraying units WAGNGER have made it easier to get
More informationTECHNICAL DATA SHEET GRILON TS V0
TECHNICAL DATA SHEET GRILON TS V0 General product description Grilon TS V0 is an unreinforced, normal viscosity, self-extinguishing PA66 + PA6 injection moulding grade. Grilon TS V0 has the following important
More informationContinuous Cast Iron. Your foremost provider of specialty products, services and solutions
Continuous Cast Iron Your foremost provider of specialty products, services and solutions Quik Guide Continous Cast Iron Quik Guide TYPE DURA-BAR MACHINABILITY GRADE RATING 1 TYPICAL APPLICATIONS G1 125%
More informationStainless Steel Bright Bars (Cold Drawn)
Stainless Steel Bright Bars (Cold Drawn) Applications : Machined Components, Pump Shafts, Valves, Fasteners, Machine Tools, Dairy Equipments, Surgical & Medical Parts, Threaded Bars, Studs, Bolts, Pins,
More informationOptimization of Magnetic Abrasive Finishing Parameters during finishing of Brass Tube
Optimization of Magnetic Abrasive Finishing Parameters during finishing of Brass Tube Baljinder Singh 1, and Charanjit Singh Kalra 2 1 Assistant Professor, DIET, Kharar, Punjab, India 2 Assistant Professor,
More informationTechnical Information
Diamondtools Technical Information The Diamond Diamonds are the hardest known material.they are selected depending on the field of application. For diamond blade manufacture synthetic diamonds are solely
More information35, rue des Bas-Trévois CS Troyes Cedex - France Tél : +33 (0) Fax : +33 (0) web :
STEEL INDUSTRY 35, rue des Bas-Trévois CS 90104-10003 Troyes Cedex - France Tél : +33 (0)3 25 76 29 50 - Fax : +33 (0)3 25 80 31 62 web : www.sedis.com - e-mail : https://sedis.com/contact Finland Sweden
More informationCHAPTER 3 DEVELOPMENT OF ELECTROPLATING SETUP FOR PLATING ABS AND POLYAMIDES
82 CHAPTER 3 DEVELOPMENT OF ELECTROPLATING SETUP FOR PLATING ABS AND POLYAMIDES 3.1 BACKGROUND OF ELECTROPLATING 83 3.2 DETAILS OF THE DEVELOPMENT OF ELECTROPLATING SETUP 83 3.2.1 Polypropylene Tank for
More informationPCD Grooving Tools, PCD Turning Tools, PCD Boring Tools for machining Pistons
PCD Grooving Tools, PCD Turning Tools, PCD Boring Tools for machining Pistons Development Background of Automotive Engine Piston Global automotive piston market is expected to reach $15,705 million by
More informationPTFE semi-finished products and finished parts
Material characteristics PTFE = Polytetrafluorethylene PTFE is excellently suited as a construction material for the chemicals industry. It temperature resistance ranges from -190 C to +250 C, and it can
More informationObjectives. This chapter provides fundamental background on processes of drawing of rods, wires and tubes.
WIRE DRAWING Objectives This chapter provides fundamental background on processes of drawing of rods, wires and tubes. Mathematical approaches for the calculation of drawing load will be introduced. Finally
More informationIndustrial flue gas probes. Instruction manual
Industrial flue gas probes Instruction manual 2 1 Contents 1 Contents 1 Contents... 3 2 Safety and the environment... 4 2.1. About this document... 4 2.2. Ensure safety... 4 2.3. Protecting the environment...
More informationDesign & Installation Manual
Design & Installation Manual Insert Registered Legal Entity name, address and number, or all other details as required to comply with regional regulations Ceramic Fibre Lining Systems CONTENTS Introduction
More informationThe Convenience Stores For Metal
TOOL STEEL SELECTOR GUIDE Application Suggested Grades Arbors... O1, A2, A6 Battering Tools... S5, S1, S7 Blacksmith Tools... S5, S1 Boiler-Shop Tools... S5, S1, S7 Bolt Clippers... S5, S1 Boring Tools...
More informationINDEX. page Stone 4 Steel 5 Super Thin 6 Stainless Steel 7 High Speed Steel 8 High Speed Stone 8 Rail Track 8 Aluminium 9 Air Tool 9
INDEX Bonded Abrasives (cutting & grinding discs) page Stone 4 Steel 5 Super Thin 6 Stainless Steel 7 High Speed Steel 8 High Speed Stone 8 Rail Track 8 Aluminium 9 Air Tool 9 Coated Abrasives (sanding
More informationA 30/36 V BF. coarse medium fi n e soft medium hard. A aluminium oxide M R U BA resin bond
Cutting and Grinding Discs echnical Information Durability Resin bonded grinding and cutting wheels for free-hand application must be used within three years of manufacture. Please see metal ring for the
More informationA 30/36 V BF. coarse medium fi n e soft medium hard. A aluminium oxide M R U BA resin bond
Cutting and Grinding Discs echnical Information Durability Resin bonded grinding and cutting wheels for free-hand application must be used within three years of manufacture. Please see metal ring for the
More informationSURFACE TEMPERATURE SENSORS
SURFACE TEMPERATURE SENSORS These sensors are thermocouples and resistance thermometers for surface temperature measurement of objects. C400 R400 Magnet sensors measurement and monitoring of objects such
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION ABP SERIES OF AUTOMATIC BLISTER PACKAGING MACHINERY Ridat ABP series of machines are some of the most advanced models in the comprehensive range of Ridat blister packaging equipment.
More informationA wide range of cold-formable steel grades and aluminium alloys are used as wire materials within a diameter range from 5 mm to 34 mm.
Cold-Formed Parts 2 ESKA manufactures complex precision cold-formed parts for applications with large and medium quantities. The highly-efficient cold- forming process ensures economic manufacture of near-net-shape
More informationData sheet Armatop A - new / Page 1. Areas of application Bonding Bonding of mineral wool, polystyrene and cork external wall insulation boards.
Data sheet Armatop A - new / Page 1 Armatop A - new Bonding and reinforcing compounds for alsecco external wall systems Areas of application Bonding Bonding of mineral wool, polystyrene and cork external
More informationRevised RoHS Annex As of 1 st January Entered force 24 September 2010, corrected 29 September 2010*
Revised RoHS Annex As of 1 st January 2011. Entered force 24 September 2010, corrected 29 September 2010* 1 1 Mercury in single capped (compact) fluorescent lamps not exceeding (per burner): 1(a) For general
More informationGraphite and C/C Products for Semiconductor & Solar Applications
Graphite and C/C Products for Semiconductor & Solar Applications Graphite and C/C Products for Semiconductor & Solar Applications www.schunk-group.com SCHUNK GROUP HIGH TEMPERATURE APPLICATIONS Schunk
More informationUSN. Hosur : 6A/6B/6C 10ME665. Discuss briefly. 1 a.
USN 1 P E PESIT Bangalore South Campus Hosur road, 1km before Electronic City, Bengaluru -100 Department of Mechanical Engineering INTERNAL ASSESSMENT TEST 3 Solutions Subject & Code : NTM 10ME665 Name
More informationPRODUCTGUIDE TECHNICAL CERAMICS.
Clarke & Severn Electronics Ph +612 9482 1944 Email sales@clarke.com.au www.clarke.com.au www.greenleafcorporation.com www.greenleafglobalsupport.com PRODUCTGUIDE TECHNICAL CERAMICS Properties of Ceramics
More informationCeramic Linear Bearings
Ceramic Linear Bearings ov-ceramic-bearings-divider - Updated - 18-09-2017 163 Ceramic Linear Bearings Technical Information Ceramic linear bearings Self-lubricating These ceramic coated linear bearings
More informationION`X HV ROUND MAGNETRONS INTRODUCTION SPECIFICATIONS OPTIONS ACCESSORIES
ION`X Rely on quality know-how performance ION`X HV ROUND MAGNETRONS INTRODUCTION SPECIFICATIONS OPTIONS ACCESSORIES ROUND MAGNETRONS UHV MAGNETRONS RECTANGULAR ROUND MAGNETRONS UHV MAGNETRONS RECTANGULAR
More information#201 Migun-Techno-World, 533 Yongsan-Dong, Yuseong-Gu, Daejeon-City, KOREA Tel: , 1688 Fax:
#201 Migun-Techno-World, 533 Yongsan-Dong, Yuseong-Gu, Daejeon-City, KOREA 305-500 Tel: 82-42-861-1687, 1688 Fax: 82-42-861-1689 http://www.coxem.com E-mail: infor@coxem.com Table of contents Before using
More informationThermocouple Reference Table
Thermocouple is the description for electrical feedthroughs that are commonly used for temperature measurement systems. A thermocouple feedthrough does not measure temperature, but rather it is used to
More informationSIGRAFLEX FOIL. Flexible Graphite Foil Manufactured from Expanded Graphite
Flexible Graphite Foil Manufactured from Expanded Graphite SIGRAFLEX flexible graphite foil is a homogeneous material that contains no adhesives or binders. Even after long service periods, SIGRAFLEX displays
More informationHARD CHROME REPLACEMENT
bv Impact 4, 6921 RZ Duiven P.O. Box 1027, 6920 BA Duiven The Netherlands Tel: +31 263190140 Fax: +31 263190141 E-mail: info@fst.nl Homepage: www.fst.nl Inc. 3040 Charlevoix Dr. SE Suite 203 I Grand Rapids,
More informationHard-facing Material. Scope of Application. Characteristics. The Hard-facing Materials Cover:
Hard-facing Material The Hard-facing Materials Cover: Cast Tungsten Carbide (Ordinary and Spherical), Cemented Carbide Pellet (YQ), Spray Welding Powder (Ordinary and Spherical), Single-crystal WC Powder
More informationBimetallic Barrel Benchmark Xaloy vs. Reiloy May 28th, 2013
Bimetallic Barrel Benchmark Xaloy vs. Reiloy May 28th, 2013 Scope available parts X-102 barrel Ø 35 mm x 1010 mm X-800 barrel Ø 40 mm x 1010 mm R121 barrel internally RP19.5 R216 barrel evaluated properties
More informationHardmetals progressive die materials
Tel:+86-731-8812288 88122855 Fax:+86-731-88122998 8812286 P.C:4125 Hardmetals progressive die materials Materials properties and their scope of applications Co % Hardness HRA Density g/cm 3 Transverse
More informationThe specialist of tailor made tubes and components
The specialist of tailor made tubes and components The core business of AMT is the supply of "custom made" carbon and alloy precision steel tubing to manufacture mechanical parts and elements Precision
More informationSteel Casting & Wear Resistant Material
Steel Casting & Wear Resistant Material INTERSCAN One Stop Industrial Solutions! About Interscan INTERSCAN was established by Mr. Tauqeer Ahmed in 1993, the company was committed to deliver clients the
More informationDevelopment of New Grade SUMIBORON BN7000 for Cast Iron and Ferrous Powder Metal Machining
SPECIAL ISSUE Development of New SUMIBORON for Cast Iron and Ferrous Powder Metal Machining Yusuke Matsuda*, Katsumi OKaMura, shinya uesaka and tomohiro FuKaYa SUMIBORON P (polycrystalline cubic boron
More informationTHINK. Filter Technology SIKA-B
THINK Filter Technology SIKA-B ENGINEERING THAT MOVES THE WORLD Since 1759 250 years of exceptional engineering GKN Sinter Metals Filters, the leading manufacturer of porous sinter metal products, offers
More informationPCD Piston Tools. Zhengzhou Halnn Superhard Materials Co.,Ltd.
PCD Piston Tools Zhengzhou Halnn Superhard Materials Co.,Ltd www.halnncbn.com Development Background of Automotive Engine Piston Global automotive piston market is expected to reach $15,705 million by
More information