The objective of this document is to specify the chemicals characteristics and properties of the material Steel AISI Carbon Steel.
|
|
- Sophie Holt
- 5 years ago
- Views:
Transcription
1 STEEL AISI - 2 Steel AISI 2. Carbon Steel. Carbon C.8.23 Manganese Mn.3.6 Phosphorus P -.4 Max Sulfur S -.5 Max FM-DO-CO-2 3/3/27
2 STEEL AISI Steel AISI 862. Carbon Steel. Carbon C.7.23 Silicon Si -.4 Max Manganese Mn Chromium Cr.35.7 Nickel Ni.4.7 Molybdenum Mo.5.25 Phosphorus P -.35 Max Sulfur S -.35 Max 2.2 Hardness RC on the Surface. Covered with Tungsten Carbide. FM-DO-CO-4 3/3/27
3 DAMERON 3 Dameron 3. Nickel alloy. Carbon C -.2 Max Boron B Silicon Si Iron Fe -. Max Chromium Cr -. Max Nickel Ni Balance Balance 2.2 Thermic treatment Not recommended. 2.3 Hardness RC on the surface. FM-DO-CO-6 3/3/27
4 DAMERON 4 Dameron 4. Nickel alloy. Carbon C -.2 Boron B Silicon Si Iron Fe -. Max Chromium Cr -. Max Nickel Ni Balance Balance 2.2. Micro Structure Micro Structure (X) Not recommended RC on the surface. FM-DO-CO-8 3/3/27
5 VITRO GRAY CAST IRON (LAMINATED GRAPHITE) F-2B Vitro Gray Cast Iron (Laminated Graphite) F-2B. Carbon C Manganese Mn Silicon Si 2 2. Sulfur S.3.4 Phosphorus P -.2 Max Molybdenum Mo.4.65 Chromium Cr -. Max % equivalent carbon from 4.7 to 4.3 = C + (%Si + %P)/ Micro structure (Glass contact zone) Laminated Graphite shape. Graphite types D, E and A. Deep of chill from 3/8 to 5/8. Graphite size 7, 8, 6. Max of 3% of A5. Ferrite 8% min, Pearlite 2% max. Carbides 5% max. Micro structure X 2.3 Hardness 3 to 6 Brinell on the surface. FM-DO-CO- 3/3/27
6 VITRO VERMICULAR CAST IRON (COMPACTED GRAPHITE) FINOT Vitro Vermicular Cast Iron (Compacted Graphite) FINOT. Carbon C Manganese Mn.4.6 Silicon Si Sulfur S -.2 Max Phosphorus P -.2 Max Molybdenum Mo.2.4 Magnesium Mg.5.3 Vanadium V -.3 Max % equivalent carbon from 4.5 to 4.63 = C + (%Si + %P)/3 Micro structure X 2.2. Micro structure (Glass contact zone) Compacted Graphite shape. Graphite distribution type IV, 6% min. Ferrite 8% min, Pearlite 2% max. Carbides 5% max. Annealing. 35 to 5 Brinell on the surface. FM-DO-CO-2 3/3/27
7 NODULAR CONTINUOUS CAST IRON (SPHEROIDAL GRAPHITE) Nodular Continuous Cast Iron (Spheroidal Graphite). Carbon C Manganese Mn.5.35 Silicon Si Sulfur S -.25 Max Phosphorus P -.5 Max Magnesium Mg Micro structure Spheroidal Graphite shape. Graphite types I and II. Ferrite 75% min, Pearlite 25% max. Carbides 5% max. Micro structure X No Treatment. 6 to 8 Brinell on the surface. FM-DO-CO-4 3/3/27
8 VITRO EXCA Vitro Exca. Aluminium Al Nickel Ni Iron Fe 4 5 Silicon Si.9. Manganese Mn 2 Zinc Zn -.2 Max Lead Pb -. Max Chromium Cr -. Max Tin Sn -.5 Max Phosphorus P -.8 Max Cobalt Co -. Max Beryllium Be -. Max Copper Cu Balance Balance 2.2. Micro structure Micro structure X Not recommended. 9 to 23 Brinell on the surface. FM-DO-CO-6 3/3/27
9 VITRO MINOX Vitro Minox. Aluminium Al Nickel Ni Zinc Zn 8 Silicon Si.9. Iron Fe -.2 Max Lead Pb -.2 Max Manganese Mn -.3 Max Tin Sn -. Max Chromium Cr -. Max Phosphorus P -.8 Max Cobalt Co -. Max Beryllium Be -. Max Copper Cu Balance Balance 2.2. Micro structure Micro structure X Annealing. 9 to 23 Brinell on the surface. FM-DO-CO-8 3/3/27
Safety Data Sheets (SDSs) Soon To be Avalable for Purchase from AFS
Steel SC002 High Alloy Steel Chromium (Cr) 10.0 52.0 7440 47 3 Cobalt (Co) 0 2.5 7440 48 4 Copper (Cu) 0 4.0 7440 50 8 Iron (Fe) Remainder 7439 89 6 Manganese (Mn) 0.3 6.0 7439 96 5 Molybdenum (Mo) 2.0
More informationSUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 000
SUB-Programs - Calibration range Fe Base for "PMI-MASTER Pro" Spark - mode Fe 100 Fe 200 *** Fe 250 *** Fe 300 Fe 400 Fe 500 Fe 000 Fe low alloy steel cast iron Cr hard / Ni resist stainless steel tool
More informationRITES Lab, Western Region, 210, Amit Industrial Estate, 61, Dr. S.S. Rao Road, Parel, Mumbai, Maharashtra
Last Amended on - Page 1 of 5 I. METALS & ALLOYS 1. Low-Alloy Steel Carbon ASTM E 415-08/ Manganese ASTM E 415-08/ Silicon ASTM E 415-08/ Sulphur ASTM E 415-08/ Phosphorous ASTM E 415-08/ Chromium ASTM
More informationSUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV"
SUB-Programs - Calibration range Fe Base for "FOUNDRY-MASTER UV" Fe 100 low alloy steel Fe 150 free cutting steel Fe 200 cast iron Fe 250 Cr-Hard/Ni.Resist Fe 300 stainless steel Fe 400 tool steel Fe 500
More informationCOOPERATIVE PATENT CLASSIFICATION
CPC C COOPERATIVE PATENT CLASSIFICATION CHEMISTRY; METALLURGY (S omitted) METALLURGY C22 METALLURGY (of iron C21); FERROUS OR NON-FERROUS ALLOYS; TREATMENT OF ALLOYS OR NON-FERROUS METALS (production of
More informationCERTIFIED REFERENCE MATERIALS (CRM)
CERTIFIED REFERENCE MATERIALS (CRM) Sufficiently Homogenized Indian Reference Materials certified by Round robin analysis for the use of validation of methods and calibration. CSIR-National Metallurgical
More informationAnalysis of Cast Iron Using Shimadzu PDA-7000
Analysis of Cast Iron Using Shimadzu PDA-7000 C112-0510M The analysis of low and high alloy cast iron by optical emission spectrometry is presented. Cast iron alloys are classified by their mechanical
More informationEngineering Materials
Engineering Materials Lecture 2 MEL120: Manufacturing Practices 1 Selection of Material A particular material is selected is on the basis of following considerations 1. Properties of material 1. Properties
More informationAlloy Steels. Engineering Materials. Introduction : Msc. Shaymaa Mahmood
Alloy Steels Introduction : Steels are, essentially, alloys of iron and carbon, containing up to 1.5 % of carbon. Steel is made by oxidizing away the impurities that are present in the iron produced in
More informationINDEX FOR STAMPING DIES CAST MATERIALS
INDEX FOR STAMPING DIES CAST MATERIALS 06/03/10 PAGE DATE DESCRIPTION D-1 06/03/10 Index For Dies Cast Materials D-2 03/31/10 General Information D-3 General Information D-4 General Information D-5 General
More informationSpecification ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH All.steel f.quen.a.temp, h.str.
Class: Heat-treatable steel Specification 16-09 ALLOYED STEEL FOR QUENCHING AND TEMPERING, HIGH STRENGTH Class No.:11 JED 723 Previous Edition Abbreviated Title 15-07 All.steel f.quen.a.temp, h.str. 8
More informationFerro alloys. 1) Ferro silicon. 2) Ferro manganese. 3) Ferro chrome. 4) Silicon manganese. 5) Ferro aluminium. 6) Ferro titanium. 7) Ferro molybdenum
Ferro alloys 1) Ferro silicon 2) Ferro manganese 3) Ferro chrome 4) Silicon manganese 5) Ferro aluminium 6) Ferro titanium 7) Ferro molybdenum 8) Ferro silicon calcium 9) Ferro silicon magnesium 10) Ferro
More informationEffects in Ductile Iron
Summary of Element Effects in Ductile Iron Rick Gundlach Element Materials Technology Wixom Insert Company Logo Here DIS Annual Meeting, June 7, 2012 Muskegon, Michigan Types of Alloying Elements Substitutional
More informationSpheroidal Graphite (Nodular) Cast Iron:
Product Type Grade of Product Sub Grade SG Iron Pearlitic Accicular Adamite Steel Based Alloy Steel Solid Rolls Graphitic IC Rolls DP Rolls SG Core G I Core ACCI Rolls Spheroidal Graphite (Nodular) Cast
More informationCERTIFICATE OF ANALYSIS
BAY 3, 4500 5TH STREET NE CALGARY, AB CANADA T2L 7C3 MAXXAM JOB #: A814851 Received: 2008/04/02, 13:15 Matrix: Water # s Received: 1 This report supersedes all previous reports with the same Maxxam job
More informationChapter 11 Part 2. Metals and Alloys
Chapter 11 Part 2 Metals and Alloys Nomenclature of Steels Historically, many methods for identifying alloys by their composition have been developed The commonly used schemes in this country are those
More informationProperties of Valve Materials
Properties of Valve Materials ASTM NO. OTHER DESIGNATION AL MANGA- CARBON CHROME COBALT COPPER IRON LEAD NESE C Cr Co Cu Fe Pb Mn MOLYB- NESE Mo Commercial Aluminum 380 SC 84 A (Modified) UNS A38000 87.0.0.3
More informationMaterials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Distribute * : Required Field Supplier Information Company Name * STMicroelectronics
More informationMACHINEABILITY RATINGS
MACHINEABILITY RATINGS OVERVIEW There are many different metals commercially available. Some are easier to machine than others. Many years ago, a system was developed to rate the relative ease or difficulty
More informationIssue February 2017 Valid to December ISO 9001 Registered Quality Management
Issue February 2017 Valid to December 2017 ISO 9001 Registered Quality Management 015 Index December 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 43
More informationSolid Solution Strengthened Ferritic Ductile Iron (SSFDI): Effects and Limitations of Residual Alloying Elements
PROGRAM OBJECTIVE(S) Solid Solution Strengthened Ferritic Ductile Iron (SSFDI): Effects and Limitations of Residual Alloying Elements Julia Scruton, Dr. Joseph Licavoli, Dr. Paul Sanders Michigan Technological
More informationPSection P. Sec. P Page 1
PSection P CHEMICAL ANALYSES OF STANDARD SIZES STANDARD METALS AND DESIGNATION SYSTEMS... 2 EFFECTS OF COMMON ALLOYING ELEMENTS IN STEEL....... 3-4 DESIGNATION OF CARBON STEELS........................
More informationmaterial specifications
METAL sheet / plate AS/NZS 1734 " and aluminium alloys - Flat sheet, coiled sheet and plate" Material Finish 304SS 0.9mm Bright annealed Alloy 5052 H32 Ultimate tensile stress 215 MPa minimum Yield tensile
More informationIssue February 2016 Valid to December ISO 9001 Registered Quality Management
Issue February 2016 Valid to December 2016 ISO 9001 Registered Quality Management 015 Index January 2016 Page Index Inside front cover Introduction & Abbreviations. 1 Information - Definitions etc. 46
More information1. Scope :- 2. Referenced Documents :-
Standard Specification for Forged or Rolled N06030, N06022, N06035, N06200, N06059, N06686, N08020, N08024, N 08026, N08367, N10276, N10665, N10675, N 10629, N08031, N06045, N06025, and R20033 Alloy Pipe
More informationCast Irons, Ductile Irons & Malleable Irons
Cast Irons, Ductile Irons & Malleable Irons CAST IRONS mium Sulfur Silicon Nickel Chro- Copper Alloying Elements TransverseTest Load Transverse Test Deflection at Center ksi Mpa Lbs. kn in. mm. HI-STRENGTH
More informationIssue February 2018 Valid to December ISO 9001 Registered Quality Management
Issue February 2018 Valid to December 2018 ISO 9001 Registered Quality Management 015 Index February 2018 Page Index Inside front cover Introduction & Abbreviations. 3 Information - Definitions etc. 53
More informationMaterials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Manufacturing Info * : Required Field Supplier Information Company Name * STMicroelectronics
More informationHAIR ELEMENTS. PATIENT: Number 496 SEX: Female AGE: 70. POTENTIALLY TOXIC ELEMENTS TOXIC RESULT REFERENCE PERCENTILE ELEMENTS µg/g RANGE 68 th 95 th
HAIR ELEMENTS PATIENT: Number 496 AGE: 70 POTENTIALLY TOXIC ELEMENTS TOXIC ELEMENTS µg/g RANGE 68 th 95 th Aluminum 2.4 < 7.0 Antimony < 0.01 < 0.050 Arsenic 0.042 < 0.060 Barium 0.27 < 2.0 Beryllium
More informationSURFACE VEHICLE STANDARD
SURFACE VEHICLE STANDARD J434 Issued 1956-09 Revised 2004-02 REV. FEB2004 Superseding J434 JUN1986 (R) Automotive Ductile (Nodular) Iron Castings 1. Scope This SAE standard covers the minimum mechanical
More informationResource Guide. Section 4: Ni-Resist
Resource Guide Section 4: Ni-Resist Section 4 Ni-Resist Description of Grades... 4-3 201 (Type 1) Ni-Resist... 4-4 202 (Type 2) Ni-Resist... 4-6 Stock Listings... 4-8 4-2 Ni-Resist Description of Grades
More informationTITLE: SABS PROFICIENCY TESTING SCHEME, RSA
TITLE: SABS PROFICIENCY TESTING SCHEME, RSA PRESENTED BY: Ms C. MODIKA Contact Info : +7(0) 48 6383 Fax No. ; +7(0) 48 609 Email : Modikac@sabs.co.za TANZANIA, 3 8 December 007 Mission Mission Statement
More informationTECHNICAL DATA SHEET 30
506 TECHNICAL DATA SHEET 30 Braze Welding Alloy with 6 Nickel Cu-Zn-Ni 900 - - - - 506 is basically an alloy of copper and zinc with 6 Nickel, which enhance the mechanical properties as compared to CUPROX.
More informationADDITIONAL SCIENCE/CHEMISTRY. A.M. TUESDAY, 14 January hour
Surname Centre Number Candidate Number Other Names 0 GCSE 4472/02 ADDITIONAL SCIENCE/CEMISTRY CEMISTRY 2 IGER TIER A.M. TUESDAY, 14 January 2014 1 hour For s use Question Maximum Mark Mark Awarded 1. 8
More informationADDITIONAL SCIENCE/CHEMISTRY. A.M. TUESDAY, 14 January hour
Surname Centre Number Candidate Number Other Names 0 GCSE 4472/02 ADDITIONAL SCIENCE/CEMISTRY CEMISTRY 2 IGER TIER A.M. TUESDAY, 14 January 2014 1 hour For s use Question Maximum Mark Mark Awarded 1. 8
More informationATI 418 SPL alloy is readily forgeable and has fair machinability and cold formability in the annealed condition.
ATI 418 SPL Stainless Steel (UNS S41800) GENERAL PROPERTIES ATI 418 SPL alloy (Greek Ascoloy) is a corrosion and heat resistant stainless steel similar in many respects to Type 410 but exhibiting improved
More informationRaw Potable Well Water Analysis: Grid Water Analysis: 2009 & 2016
Raw Potable Well Analysis: 2006-2016 Grid Analysis: 2009 & 2016 Sun Peaks, British Columbia Sun Peaks Utilities Co., Ltd. 1280 Alpine Road Sun Peaks, BC V0E 5N0 Tel: 250-578-5490 Fax: 250-578-5516 Email:
More informationDRINKING WATER ANALYSIS SUMMARY
End : Iron 1,000 ug/l 621 3/4/2013 15:10 Lead 0.11 ug/l J Iron 2,400 ug/l Nickel 0.50 ug/l J Zinc 7.9 ug/l J Nickel 0.54 ug/l J 621 3/4/2013 15:10 Manganese 34 ug/l Manganese 26 ug/l 621 3/4/2013 15:10
More informationProperties and Applications of Metals and Alloys
ENGINEERING MATERIALS Properties and Applications of Metals and Alloys C.P. Sharma ENGINEERING MATERIALS Properties and Applications of Metals and Alloys C.P. SHARMA Department of Metallurgical Engineering
More informationAAS - Atomic Absorption Mono Element ppm Standard Solutions (Spectro ECON)
CL01.0105 CL01.0106 CL01.0107 CL01.0126 CL01.0127 CL01.0135 CL01.0136 CL01.0137 CL01.0138 CL01.0205 CL01.0206 CL01.0207 CL01.0216 Aluminium standard solution (Spectro ECON) 8.948 g AlCl3.6H2O / l H2O Solution
More informationJapanese Iron and Steel Certified Reference Materials April 9, 2012
I. CRMs for Chemical Analysis Japanese Iron and Steel Certified Reference Materials April 9, 2012 I-1. Pure iron series Mass content in % C Si Mn P S Ni Cr Mo Cu Co Al As Sn B N Na X 001-6 High grade pure
More informationIntroduction: Ferrous alloys - Review. Outline. Introduction: Ferrous alloys
Introduction: Ferrous alloys - Review Outline Introduction - Review - Ferritic SS - Austinitic SS - Matensitic SS - Precipitation Hardenable SS Cast Irons - Gray CI - Ductile CI - White CI - Malleable
More informationWhat is Steel? Prepared By: John Cawley
What is Steel? Prepared By: John Cawley Presentation Objectives Describe the composition of steel. Identify the differences between steel and iron. Use the steel numbering system to identify various types
More informationCast Iron Foundry Practices 1. The family of cast irons
MME 345, Lecture 34 Cast Iron Foundry Practices 1. The family of cast irons Ref: [1] Heine, Loper and Rosenthal. Principles of Metal Casting, Tata McGraw-Hill, 1967 [2] S H Avner. Introduction to Physical
More informationGuidelines for ASTM Specification and Metal Grades
Guidelines for ASTM Specification and Metal Grades CONTENTS 27/A 27M Standard Specification for Steel Castings, Carbon Suitable For General Applications... 1 A 128/ A 128M Standard Specification for Steel
More informationEnvironmental Management and Materials Information
Environmental Management and Materials Information Product Content Information for: MAX3622CUE+ Links Qualifications Package Description Chemical Composition Detailed Package Component Data Qualifications
More informationGeneral Certificate of Secondary Education ADDITIONAL SCIENCE. FOUNDATION TIER (Grades G-C) P.M. FRIDAY, 18 January 2008 (45 minutes)
Candidate Name Centre Number Candidate Number General Certificate of Secondary Education 24/1 ADDITIONAL SCIENCE FOUNDATION TIER (Grades G-C) CHEMISTRY 2 P.M. FRIDAY, 18 January 28 (45 minutes) For Examiner
More informationMetallurgy of Aluminum Die Casting Alloys EC 305 Dave Neff
Metallurgy of Aluminum Die Casting Alloys EC 305 Dave Neff Dave Neff OUTLINE Where aluminum comes from Why alloys are useful Alloy designation and nomenclature Specific roles of alloy elements Properties
More informationEnvironmental Management and Materials Information
Environmental Management and Materials Information Product Content Information for: MAX3674ECM+T Links Qualifications Package Description Chemical Composition Detailed Package Component Data Qualifications
More informationASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423
ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: San Nicolás de los Garza, N.L. 66460 (Hereinafter
More informationAppendix C: Water Quality Data
Appendix C: Water Quality Data Your Project #: 111257005 Site: TIM HORTONS SYLVIA LAKE NSD # 16300R Attention: DAVID WHETTER STANTEC CONSULTING LTD 603-386 BROADWAY AVENUE WINNIPEG, MB CANADA R3C
More informationMetal Reference Materials - SOLID
2013 2014 Metal Reference Materials - SOLID Iron Copper Nickel Cadmium Cobalt Lead Magnesium Molybdenum Noble metals Tin Titanium Zinc SUS - Setting up Samples Fluxana is dedicated to serve and support
More informationNON FERROUS METAL MESH
WALCOOM Walcoom Corporation "Completion on time within budget, focused team and service, Walcoom is always ready to help." Walcoom offers a large selection of non ferrous metal meshes and also thoughtful
More informationISO INTERNATIONAL STANDARD. Iron ores Determination of various elements by X-ray fluorescence spectrometry Part 1: Comprehensive procedure
INTERNATIONAL STANDARD ISO 9516-1 First edition 2003-04-01 Iron ores Determination of various elements by X-ray fluorescence spectrometry Part 1: Comprehensive procedure Minerais de fer Dosage de divers
More informationEnvironmental Management and Materials Information
Environmental Management and Materials Information Product Content Information for: MAX3637ETM+ Links Qualifications Package Description Chemical Composition Detailed Package Component Data Qualifications
More informationPractice General Chemistry Speaking Test (I. Gould) (Questions from Chapter 1 of the textbook) hydrogen 1 H
Practice General hemistry Speaking Test (I. Gould) (Questions from hapter 1 of the textbook) hydrogen 1 1.0079 helium 2 e 4.0026 lithium 3 Li 6.941 beryllium 4 Be 9.012 boron 5 B 10.811 carbon 6 12.0107
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationElvaX Light for Petrochemical analysis
ElvaX Light for Petrochemical analysis Introduction ElvaX Light is a powerful and productive instrument for analysis of petroleum products, such as automotive fuels (gasoline, diesel), lubricating oil,
More informationBottom Ash Data Week 45
Bottom Ash Data 2018 Week 45 The following analytical report was sent to the Ministry of Environment and Climate Change Strategy on November 21, 2018. The data represents bottom ash composite results for
More information300089, H, , H, , H
SECTION 1: IDENTIFICATION PRODUCT IDENTIFIER: Bossweld Nickel Bronze Bare Rod PRODUCT CODES: 300089, 300089H, 300090, 300090H, 300091, 300091H SYNONYMS: Nickel Bronze (Bare/Flux coated) MANUFACTURER: Dynaweld
More informationBottom Ash Data Week 52
Bottom Ash Data 2018 Week 52 The following analytical report was sent to the Ministry of Environment and Climate Change Strategy on January 10, 2019. The data represents bottom ash composite results for
More informationBottom Ash Data Week 47
Bottom Ash Data 2018 Week 47 The following analytical report was sent to the Ministry of Environment and Climate Change Strategy on December 6, 2018. The data represents bottom ash composite results for
More informationAluminium and aluminium alloys. Castings. Chemical composition and mechanical
BSI titles relevant to the cast metals industry (as at 20/5/9) BSI Title International Equiv Aluminium and aluminium alloys. Castings. Chemical composition and mechanical where known 94/713477DC properties
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 6 Finchwell Close Contact: Mr M Collier Handsworth Tel: +44 (0)114-2437271 Sheffield Fax: +44 (0)114-2437288 South Yorkshire E-Mail: office@metalstechnology.co.uk
More informationMaterials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Manufacturing Info * : Required Field Supplier Information Company Name * STMicroelectronics
More information2.3.5 Thermal Expansion
1 of 8 15/11/2010 15:59 Home About Table of Contents Advanced Search Copyright Feedback Privacy You are here: Chapter: 2 General physics Section: 2.3 Temperature and heat SubSection: 2.3.5 Thermal expansion
More informationMicrosegregation in Nodular Cast Iron with Carbides
ARCHIVES of FOUNDRY ENGINEERING DOI: 10.2478/v10266-012-0120-z Published quarterly as the organ of the Foundry Commission of the Polish Academy of Sciences ISSN (2299-2944) Volume 12 Issue 4/2012 127 134
More informationCERTIFICATE OF ANALYSIS REVISED REPORT
Your C.O.C. #: A122303 Attention: STEPHEN LEGAREE EDMONTON 9331 9331-48 Street EDMONTON, AB CANADA T6B 2R4 Report #: R1787645 Version: 2R CERTIFICATE OF ANALYSIS REVISED REPORT MAXXAM JOB #: B4B4991 Received:
More informationSURFACE VEHICLE STANDARD
400 Commonwealth Drive, Warrendale, PA 15096-0001 SURFACE VEHICLE STANDARD J403 Issued 1911-06 Revised 2001-11 Superseding J403 JUN2000 REV. NOV2001 s of SAE Carbon Steels 1. Scope In 1941, the SAE Iron
More informationMaterials Declaration Form
Materials Declaration Form IPC 1752 Version 2 Form Type * Distribute Sectionals * Material Info Subsectionals * A-D Manufacturing Info * : Required Field Supplier Information Company Name * STMicroelectronics
More informationARC XL Series. Broadband g-line & i-line Anti-Reflective Coatings
ARC XL Series Broadband g-line & i-line Anti-Reflective Coatings Why Use a Brewer Science ARC? Resist Resist Substrate ARC Substrate Without Brewer ARC With Brewer ARC Lithography Reflective Problems In
More informationNomenclature. A systematic method of writing chemical formulas and naming compounds
Nomenclature A systematic method of writing chemical formulas and naming compounds Chemical symbols Symbols are used to represent elements Either one capital letter, or a capital letter with a lower case
More informationTheir widespread use is accounted for by three factors:
TYPES OF METAL ALLOYS Metal alloys, by virtue of composition, are often grouped into two classes ferrous and nonferrous. Ferrous alloys, those in which iron is the principal constituent, include steels
More information--> Buy True-PDF --> Auto-delivered in 0~10 minutes. NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA
ICS 77.140.01 H 40 GB NATIONAL STANDARD OF THE PEOPLE'S REPUBLIC OF CHINA GB/T 221-2008 Replacing GB/T 221-2000 Notations for Designations of Iron and Steel GB/T 221-2008 How to BUY & immediately GET a
More informationUnderstanding your EAL agricultural soil results
Understanding your EAL agricultural soil results An EAL agricultural soil test report holds a wealth of information. To assist in its interpretation, please refer to the colour coded text below and within
More informationReamer & Drill Selection Procedures
Please note: All information contained in these pages is accurate to the best of our knowledge. Materials and conditions can vary, causing differences over which we have no control. Therefore, we cannot
More informationRELIABLE PIPES & TUBES LTD.
RELIABLE PIPES & TUBES LTD. OHSAS 18001:2007 CERTIFIED ISO 9001:2008 CERTIFIED ISO 14001:2004 CERTIFIED PED CERT NO 01 202 IND/Q-11-0033 GOVT. RECOGNIZED EXPORT HOUSE Manufacturer & Exporters of Monel,
More informationChapter 1.6. Polished Single-Crystal Silicon, Prime Wafers (all numbers nominal) Wafer Specification Table. Diameter 100 mm 4-inch 150 mm 6-inch
Chapter 1.6 I - Substrate Specifications Polished Single-Crystal Silicon, Prime Wafers (all numbers nominal) Wafer Specification Table Diameter 100 mm 4-inch 150 mm 6-inch Thickness 525 µm 20.5 mils 675
More informationAdvanced School on Applications of First Principles and Molecular Simulations in Physical Sciences
Advanced School on Applications of First Principles and Molecular Simulations in Physical Sciences Simulations of metals and alloys Paul O. ADEBAMBO, Dept. of Physics, FUNAAB Content Classification of
More informationCERTIFICATE OF ANALYSIS 1.0 ACCREDITATION / REGISTRATION 2.0 PRODUCT DESCRIPTION
300 Technology Drive Christiansburg, VA 24073. USA inorganicventures.com CERTIFICATE OF ANALYSIS tel: 800.669.6799. 540.585.3030 fax: 540.585.3012 info@inorganicventures.com 1.0 ACCREDITATION / REGISTRATION
More informationAtmy Analytical Labs Pvt. Ltd., I-38, DLF Industrial Area, Phase-1, Faridabad, Haryana. Discipline Chemical Testing Issue Date
Last Amended on - Page 1 of 11 I. METAL & ALLOYS 1. Steel (Carbon Steel & Low Alloy Steel) Carbon ASTM E-415: 2014, IS 228 (Part 1): 1997 (RA 2008) 0.01 % to 1.5 % 0.01 % to 1.5 % Silicon ASTM E-415: 2014,
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Metals and Minerals Division 2 Perry Road Witham Essex CM8 3TU Contact: Mrs C Hargreaves Tel: +44 (0)1376 536800 Fax: +44 (0)1376 520819 E-Mail:
More informationMarc King. Hiler Industries LaPorte, IN
Carbidic Ductile Iron Marc King Metallurgist Hiler Industries LaPorte, IN Why would anybody in their right mind want to add carbides to ductile iron? Ductile Iron is a great engineering material: Great
More informationCHAPTER9. Phase Diagrams Equilibrium Microstructural Development
CHAPTER9 Phase Diagrams Equilibrium Microstructural Development The microstructure of a slowly cooled eutectic soft solder ( 38 wt%pb wt % Sn) consists of a lamellar structure of tin-rich solid solution
More informationNew GCSE 4462/02 SCIENCE A HIGHER TIER CHEMISTRY 1
Surname Other Names Centre Number 0 Candidate Number New GCSE 4462/02 SCIENCE A HIGHER TIER CHEMISTRY 1 ADDITIONAL MATERIALS A.M. WEDNESDAY, 18 January 2012 1 hour In addition to this paper you may require
More informationAlloy Steels. Chapter 7. Copyright 2007 Dr. Ali Ourdjini.
7 Alloy Steels At the end of this lesson students should be able to: Classify alloy steels Explain: effects of alloying elements to steel properties Discuss: composition, microstructure, mechanical properties
More informationMETALLIC MATERIALS SPECIFICATION HANDBOOK
METALLIC MATERIALS SPECIFICATION HANDBOOK METALLIC MATERIALS SPECIFICATION HANDBOOK FOURTH EDITION Robert B. Ross Ross Materials Technology Ltd, East Kilbride, Glasgow Volume I SPRINGER-SCIENCE+BUSINESS
More informationADDITIONAL SCIENCE/CHEMISTRY
Surname Centre Number Candidate Number Other Names 0 GCSE 4472/02 S15-4472-02 ADDITIONAL SCIENCE/CHEMISTRY CHEMISTRY 2 HIGHER TIER A.M. THURSDAY, 14 May 2015 1 hour For s use Question Maximum Mark Mark
More informationEnvironmental Management and Materials Information
Environmental Management and Materials Information Product Content Information for: MAX44285FAWA+ Links Qualifications Package Description Chemical Composition Detailed Package Component Data Other Component
More informationMaterial Evaporation Application Comment MP P / Optical films, Oxide films, Electrical contacts. Doping, Electrical contacts.
for vapour Aluminum (Al) -, Optical, Oxide, Electrical BN liners with lid are recommended due to the reactivity and the fact that Al creeps out. Cooling down of the cell with 1K per minute. 660 972 Antimony
More informationCertificate of Analysis
Town of Niverville ATTN: RYAN DYCK/ANDREW REMPEL PO Box 267 Niverville MB R0A 1E0 Date Received: Report Date: Version: 27-APR-16 14:57 (MT) FINAL Client Phone: 204-392-3012 Certificate of Analysis Lab
More informationNew GCSE 4472/02 ADDITIONAL SCIENCE
Surname Other Names Centre Number 0 Candidate Number New GCSE 4472/02 ADDITIONAL SCIENCE Higher Tier CHEMISTRY 2 A.M. MONDAY, 14 January 2013 1 hour ADDITIONAL MATERIALS In addition to this paper you will
More informationFerrous Alloys. Steels
Ferrous Alloys Ferrous alloys those of which iron is the prime constituent are produced in larger quantities than any other metal type. They are especially important as engineering construction materials.
More informationAnalysis of Copper and Copper Base Alloys, Using Shimadzu PDA-7000
C112-0514M Analysis of Copper and Copper Base Alloys, Using Shimadzu PDA-7000 Copper alloys are designated by their chemical composition with characteristic properties such as high corrosion resistance,
More informationMaterial Properties and Phase Diagrams
PY2M20 Material Properties and Phase Diagrams Lecture 6 P. Stamenov, PhD School of Physics, TCD PY2M20-6 Microstructures in Eutectic ti Systems: I C o < 2 wt% Sn Result: - at extreme ends - polycrystal
More informationWater Monitoring - Teralba Quarry EPA Point No.4 - Adit Overflow
No. Dates Water Monitoring - Teralba Quarry - 2018 - EPA Point No.4 - Adit Overflow EPA No 4-148 ABCDE EPA No 4-149 ABCDE EPA No 4-150 ABCDE January 2018. Febrary 2018. March 2018. EPA No 4-151 AB April
More informationICP-AES Determination of 15 Kind of impurity elements in the Vanadium-aluminum alloy
Available online at www.sciencedirect.com Procedia Engineering 24 (2011 ) 447 453 2011 International Conference on Advances in Engineering ICP-AES Determination of 15 Kind of impurity elements in the Vanadium-aluminum
More informationENMAT101A Engineering Materials and Processes Associate Degree of Applied Engineering (Renewable Energy Technologies) Lecture 15 Cast Iron
ENMAT101A Engineering Materials and Processes Associate Degree of Applied Engineering (Renewable Energy Technologies) Lecture 15 Cast Iron http://www.sicoconrod.net www.highered.tafensw.edu.au Cast Iron
More informationSpecification Aluminium Die-Casting Alloy, high silicon content Aluminium Die-Casting Alloy, high silicon content
Specification 2012-10 Class: Aluminium and Al-alloys Class No.:21 Aluminium Die-Casting Alloy, high silicon content JED 853 Previous Edition Part name (for databases) 2011-11 Aluminium Die-Casting Alloy,
More information