SIGRAFLEX FOIL. Flexible Graphite Foil Manufactured from Expanded Graphite

Transcription

1 Flexible Graphite Foil Manufactured from Expanded Graphite

2 SIGRAFLEX flexible graphite foil is a homogeneous material that contains no adhesives or binders. Even after long service periods, SIGRAFLEX displays no notable changes in its properties compared with other sealing materials. Inhibitors can be added to enhance the oxidation and corrosion resistance properties of the flexible graphite. SIGRAFLEX graphite foil is also available with self-adhesive backing. For applications in stuffing box pack- ings, a special PTFE-coated foil is supplied with markedly improved friction and leakage behavior. SIGRAFLEX APX foil offers maximum protection against oxidation and thus ensures greater reliability and longer service lives. SIGRAFLEX graphite foil is available in various dimensions and densities, and with a purity level of 96 % up to %. SIGRAFLEX graphite foil is supplied as standard in both roll and tape form. The different SIGRAFLEX grades and their respective code designations are as follows: APX D C E Z CS/ZS ZX TF Graphite foil with outstanding oxidation resistance Graphite foil of automotive quality Graphite foil of industrial quality Graphite foil with conventional oxidation inhibitor Graphite foil of nuclear quality Graphite foil of industrial/nuclear quality with self-adhesive backing Graphite foil of nuclear quality with corrosion inhibitor Graphite foil with PTFE coating for stuffing box packings Properties Flexible, soft Impermeable to gases and liquids Can be used from -250 C up to 3000 C depending on installation and operating conditions: in an inert atmosphere up to approx C for applications in air at more than approx. 400 C, users should request our advice Resistant to most media Asbestos-free, presents no health hazard No ageing or embrittlement, because of absence of binders and fillers Can be supplied with high purity Long-term stability of compressibility and recovery over a wide temperature range No measurable cold or warm flow up to maximum permissible gasket pressure Properties highly anisotropic, particularly in respect of electrical and thermal conductivity Low coefficient of friction Resistant to radiation Very good resistance to thermal shock Excellent residual stress Easily processed by cutting or punching Can be bonded using commercial adhesives Any existing industrial property rights must be observed

3 Applications Semi-finished products for gaskets and packings Static seals Gaskets, exhaust manifold and cylinder head gaskets Graphite top layer for kammprofile gaskets Spiral-wound graphite gaskets Dynamic seals Stuffing box packings Crinkle tapes for stuffing box packings Foils for thermal applications Heating elements Insulations/heat shields Release foils in glassworks and hot presses Backing strips for welding operations Semi-finished products for electrical applications Electrostatic filter plates Cathodes for electrolysis of liquids, electrical contacts Foils for chemical applications Vessel linings and coatings against hot and aggressive media

4 Material Data Foil grade D C E Z APX Bulk density g/cm Ash content % <_ 4 <_ 2.0 <_ 1.0 <_ 0.15 <_ 2 Chloride content ppm <_ 50 <_ 50 <_ 20 <_ 20 <_ 50 Foil thickness mm Roll width* mm /1000 Tape width* mm >_ 4 mm Roll length* m 50 Typical material data of SIGRAFLEX grade Z with bulk densities of 1.0 g/m 3 Thermal conductivity at 20 C in plane W/mK 190 through plane W/mK 4.8 Resistivity at 20 C in plane Ωµm 9 through plane Ωµm >_ 650 Specific heat (20 C) kj/kgk 0.7 Coefficient of emission at 20 C C C C 0.65 Coefficient of thermal expansion C in plane 10-6 /K approx. 1 through plane 10-6 /K approx. 30 Permeability coefficient for air through plane cm 2 /s < < Shore hardness (D) 30 Tensile strength N/mm 2 >_ 4 Elongation at break % >_ 1 Max. permissible compressive stress Specimen: 20 x 20 mm x thickness 0.35 mm N/mm mm N/mm mm N/mm Residual stress (DIN 52913), 16 h, 300 C N/mm 2 >_ 48 initial stress 50 N/mm 2 Coefficient of friction at 20 C (in air) against steel, peak-to-valley height <_ 10 µm * Other dimensions on request Approvals BAM Drinking water Foodstuffs KTW

5 Forms Supplied Graphite foils are available in the above-mentioned grades, bulk densities and dimensions. They are supplied in roll or tape form in a standard length of 50 m. Typical Order Ash content <_ 0.15 % Density 0.7 g/cm 3 Thickness 0.50 mm Width mm Length 50 m 50 m x mm F07Z Ash content <_ 2.00 % Density 1.0 g/cm 3 Thickness 0.80 mm Width 1000 mm Length 50 m 50 m x 1000 mm F08010C Packaging The foils are wound onto cardboard cores. Stable flanges with handles ensure that the wound foil does not come into contact with the floor and is easy to handle. Rolls of this type are supplied in rigid cartons. Foil width: mm Winding core diameter: 4 Carton dimensions in mm W x H x L: 240 x 240 x 620 W x H x L: 300 x 300 x 620 Foil width: 1000 mm Winding core diameter: 4 Carton dimensions in mm W x H x L: 240 x 240 x 1060 W x H x L: 300 x 300 x 1060 Tape width: 5.2 mm Winding core diameter: 4 Carton dimensions in mm W x H x L: 240 x 240 x 1060 W x H x L: 300 x 300 x 1060 Summary of Available Foils in Grade C and Z Type Ash content Thickness Width Density designation % mm mm g/cm 3 F01513Z F02012Z F02510Z F03510Z F03811Z <_ F07Z F05010Z F07510Z F08010Z F03510C F03811C F07C <_ F05010C F07510C F08010C Other Relevant Publications SIGRAFLEX, Products Manufactured from Flexible Graphite Foil Data sheets: SIGRAFLEX STANDARD SIGRAFLEX ECONOMY SIGRAFLEX UNIVERSAL SIGRAFLEX UNIVERSAL PRO SIGRAFLEX SELECT SIGRAFLEX HOCHDRUCK SIGRAFLEX HOCHDRUCKPRO SIGRAFLEX MF SIGRAFLEX SIGRAFLON H, High- Quality Sealing Sheet Made from Reinforced PTFE SIGRAFLEX, Graphite Foils and Laminated Sheets for Thermal Insulation and Electric Heating Elements

6 Product Overview Product Characteristics Recommended applications SIGRAFLEX Flexible, -250 C to approx. C; for compressed packings, F...C / Z / APX continuous spiral-wound and kammprofile gaskets SIGRAFLEX STANDARD Unreinforced, Large segmented gaskets; enamel or glass flanges; L...CI impregnated highly corrosive media SIGRAFLEX ECONOMY Reinforced with Pumps; fittings; gas; offshore; V...C4 bonded s/s foil waste gas pipelines SIGRAFLEX UNIVERSAL Reinforced with Pipework and vessels in the chemical and V...C2I perforated s/s sheet, petrochemical industries and in power stations impregnated SIGRAFLEX UNIVERSAL PRO Reinforced with For applications subject to the German TA Luft V...C2I-P perforated s/s sheet, (Clean Air Act); for pipework and vessels in the impregnated chemical and petrochemical industries and in power stations SIGRAFLEX SELECT High-integrity For applications subject to the German TA Luft V16010C3I s/s foil reinforcement, (Clean Air Act); raised-face flanges; pipework impregnated in the chemical and petrochemical industries SIGRAFLEX HOCHDRUCK High-integrity Universal gasket for solving sealing problems in V...Z3I multilayer laminate, pipework, process equipment, tongue-and-groove impregnated flanges and special-dimension sealed joints in the chemical and petrochemical industries and in power stations SIGRAFLEX HOCHDRUCKPRO High-integrity Universal gasket sheet for applications subject to the V...Z3I-P multilayer laminate, German TA Luft (Clean Air Act) and solving sealing impregnated problems in pipework, process equipment, tongue-andgroove flanges and special-dimension sealed joints in the chemical and petrochemical industries and in power stations SIGRAFLEX MF High-integrity Maximum requirements for sealability (German TA Luft), V...Z2MF laminate made of safety, chemical resistance and process hygiene; graphite, s/s and PTFE sealed joints in the chemical, petrochemical, pharmaceutical and food industries SIGRAFLEX High-integrity PTFE-envelope gaskets in enameled pipework, V...Z3E s/s foil reinforcement vessels, stub connections, etc. Forms supplied: roll or tape sheet material gasket with inner eyelet, for applications subject to the German Clean Air Act This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should therefore not be construed as guaranteeing specific properties of the products described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale /1 5NÄ Printed in Germany registered trademarks of SGL Carbon Group companies Expanded Graphite SGL TECHNOLOGIES GmbH Werner-von-Siemens-Str Meitingen/Germany Phone Fax expandedgraphite@sglcarbon.de