C Chemical Composition. Copper Alloy Data C Tradename: Beryllium Copper. Designation: Active? True. Inactive Date:
|
|
- Olivia Austin
- 5 years ago
- Views:
Transcription
1 Copper Alloy Data C17510 C17510 Tradename: Beryllium Copper Designation: Active? True Inactive Date: US EPA Registered Antimicrobial? True Chemical Composition Element Cu (1,2) Fe Ni Al Be Co Si Min (%) Max (%) Rem (1) Cu + Sum of Named Elements 99.5% min. (2) Cu value includes Ag. Alloy C17510 Page 1 of 11
2 Mechanical Properties* Form Temper Temper Code Tensile Strength (ksi) YS-0.2% Offset YS-0.5% Ext (ksi) Elongation (%) Rockwell B scale Rockwell 30T scale Fatigue Strength** (ksi) Section Size (in) 1/2 Hard and Precipitation Heat Treated TH Typ 108 Typ 8 Typ 98 Typ 81 Typ 35 Typ Hard and Precipitation Heat Treated TH Typ 110 Typ 8 Typ 98 Typ 81 Typ Flat Products Precipitation Hardened TF Typ 90 Typ 12 Typ 96 Typ 80 Typ Solution Heat Treated TB00 45 Typ 25 Typ 28 Typ 32 Typ 36 Typ Solution Heat Treated and Cold Worked: 1/2 Hard TD02 68 Typ 60 Typ 8 Typ 70 Typ 64 Typ Solution Heat Treated and Cold Worked: Hard TD04 78 Typ 70 Typ 5 Typ 83 Typ 72 Typ Forgings Precipitation Hardened TF Typ 90 Typ 92 Typ 4 Solution Heat Treated TB00 42 Typ 20 Typ 50 Typ Hard and Precipitation Heat Treated TH Typ 110 Typ 14 Typ 98 Typ Rod Precipitation Hardened TF Typ 90 Typ 18 Typ 96 Typ Solution Heat Treated TB00 45 Typ 25 Typ 28 Typ 35 Typ Solution Heat Treated and Cold Worked: Hard TD04 72 Typ 65 Typ 12 Typ 68 Typ * Measured at room temperature, 68 F (20 C). ** Fatigue Strength: 100 x 10 6 cycles, unless indicated as [N] x Alloy C17510 Page 2 of 11
3 Physical Properties Melting Point - Liquidus F 1955 Melting Point - Solidus F 1885 Densitylb/cu in. at 68 F Specific Gravity 8.77 Electrical Conductivity% IACS at 68 F 48 (1) Electrical Conductivity% IACS at 68 F 45 (2) Thermal ConductivityBtu/ sq ft/ ft hr/ F at 68 F 120 Coefficient of Thermal Expansion ⁶ per F ( F) 9.8 Specific Heat CapacityBtu/ lb / F at 68 F 0.1 Modulus of Elasticity in Tensionksi Modulus of Rigidityksi 7500 (1) Cold worked and precipitation hardened condition. HT Temper (2) AT Temper Alloy C17510 Page 3 of 11
4 Fabrication Properties Technique Suitability Soldering Brazing Oxyacetylene Welding Gas Shielded Arc Welding Coated Metal Arc Welding Spot Weld Seam Weld Butt Weld Capacity for Being Cold Worked Capacity for Being Hot Formed Good Good Not Recommended Fair Fair Good Fair Fair Excellent Good Alloy C17510 Page 4 of 11
5 Common Fabrication Processes Blanking Drilling Forming and Bending Tapping Turning Alloy C17510 Page 5 of 11
6 Thermal Properties Treatment Minimum * Maximum * Value * Time ** Medium Solution Treatment Water Precipitation Treatment Air Hot Treatment * Temperature is measured in Fahrenheit. ** Time is measured in minutes. Alloy C17510 Page 6 of 11
7 Typical uses Alloy C17510 Page 7 of 11
8 Product Category Product Reason Category Reason Conductors Conductors Corrosion Resistance Corrosion Resistance Conductors Creep Properties Creep Resistant Conductors Mechanical Properties High Strength Conductors Softening Resistance Resistance to Thermal Softening Conductors Solderability Solderability Connectors, Heavy Duty Connectors, Heavy Duty Conductivity (Thermal) Thermal Conductivity Connectors, Heavy Duty Corrosion Resistance Corrosion Resistance Connectors, Heavy Duty Creep Properties Creep Resistant Connectors, Heavy Duty Mechanical Properties High Strength Connectors, Heavy Duty Mechanical Properties Retains Strength at High Temperatures Connectors, Heavy Duty Softening Resistance Resistance to Thermal Softening Fuse Clips Fuse Clips Corrosion Resistance Corrosion Resistance Fuse Clips Mechanical Properties High Strength Electrical Fuse Clips Solderability Solderability Instrument Parts Appearance Appearance Instrument Parts Instrument Parts Corrosion Resistance Corrosion Resistance Instrument Parts Mechanical Properties High Strength Instrument Parts Solderability Solderability Relay Parts Relay Parts Corrosion Resistance Corrosion Resistance Relay Parts Creep Properties Creep Resistant Relay Parts Mechanical Properties High Strength Relay Parts Softening Resistance Resistance to Thermal Softening Relay Parts Solderability Solderability Switch Parts Switch Parts Corrosion Resistance Corrosion Resistance Switch Parts Creep Properties Creep Resistant Switch Parts Mechanical Properties High Strength Switch Parts Softening Resistance Resistance to Thermal Softening Switch Parts Solderability Solderability Alloy C17510 Page 8 of 11
9 Product Category Product Reason Category Reason Fasteners Fasteners Corrosion Resistance Corrosion Resistance Fasteners Mechanical Properties High Strength Die casting plunger tips Conductivity (Thermal) Thermal Conductivity Die casting plunger tips Mechanical Properties High Strength Die casting plunger tips Mechanical Properties Retains Strength at High Temperatures High Flux Electromagnets High Flux Electromagnets Conductivity (Thermal) High Flux Electromagnets Corrosion Resistance High Flux Electromagnets Magnetic Properties High Flux Electromagnets Mechanical Properties Thermal Conductivity Corrosion Resistance Non-Magnetic High Strength Springs Corrosion Resistance Corrosion Resistance Springs Mechanical Properties Fatigue Resistance Industrial Springs Mechanical Properties High Modulus of Elasticity Springs Mechanical Properties High Strength Thermal Transfer Plates Conductivity (Thermal) Thermal Conductivity Thermal Transfer Plates Corrosion Resistance Corrosion Resistance Thermal Transfer Plates Mechanical Properties High Strength Welding Equipment Welding Equipment Conductivity (Thermal) Thermal Conductivity Welding Equipment Corrosion Resistance Corrosion Resistance Welding Equipment Creep Properties Creep Resistant Welding Equipment Mechanical Properties High Strength Welding Equipment Softening Resistance Resistance to Thermal Softening Alloy C17510 Page 9 of 11
10 Applicable Specifications Form Specific Sub-Form System Standard Description Bar ASTM B441 COPPER-COBALT-BERYLLIUM (UNS NO. C17500) AND COPPER-NICKEL-BERYLLIUM (UNS NO. C17510) ROD AND BAR ASTM B534 COPPER-COBALT-BERYLLIUM ALLOY, PLATE, SHEET, STRIP, AND ROLLED BAR Extrusions Forgings Forgings & Extrusions ASTM B870 COPPER-BERYLLIUM ALLOY FORGINGS AND EXTRUSION ALLOYS (UNS Nos. C17500 AND C17510) Heat Exchanger Tube ASTM B944 COPPER-BERYLLIUM WELDED HEAT EXCHANGER AND CONDENSER TUBE UNS No. C Plate ASTM B534 COPPER-COBALT-BERYLLIUM ALLOY, PLATE, SHEET, STRIP, AND ROLLED BAR ASTM B441 COPPER-COBALT-BERYLLIUM (UNS NO. C17500) AND COPPER-NICKEL-BERYLLIUM (UNS NO. C17510) ROD AND BAR Rod SAE J461 WROUGHT AND CAST COPPER ALLOYS SAE J463 WROUGHT COPPER AND COPPER ALLOYS Seamless tube ASTM B937 COPPER-BERYLLIUM SEAMLESS TUBE (UNS Nos and 17510) Shapes SAE J461 WROUGHT AND CAST COPPER ALLOYS SAE J463 WROUGHT COPPER AND COPPER ALLOYS Sheet ASTM B534 COPPER-COBALT-BERYLLIUM ALLOY, PLATE, SHEET, STRIP, AND ROLLED BAR ASTM B534 COPPER-COBALT-BERYLLIUM ALLOY, PLATE, SHEET, STRIP, AND ROLLED BAR Strip Tube Electric Connector & Spring Contact ASTM B888/B88M COPPER ALLOY STRIP FOR USE IN MANUFACTURE OF ELECTRICAL CONNECTORS OR SPRING CONTACTS MILITARY MIL-C COPPER BERYLLIUM ALLOY (COPPER ALLOY NUMBERS C17500 AND C17510) STRIP SAE J461 WROUGHT AND CAST COPPER ALLOYS SAE J463 WROUGHT COPPER AND COPPER ALLOYS SAE J461 WROUGHT AND CAST COPPER ALLOYS SAE J463 WROUGHT COPPER AND COPPER ALLOYS Alloy C17510 Page 10 of 11
11 Corrosion Properties No information available. Alloy C17510 Page 11 of 11
CDA ASTM ASARCON SAE AMS FEDERAL MILITARY OTHER
Product Description: Cartridge Brass, 70% Tempers: H01 Quarter Hard, H02 Half Hard, H04 Hard Solids: 3 8" to 2 1 2" OD Hex: 3 8" to 2" OD Rectangles: Consult Mill Standard Lengths: 144" Wrought Wrought
More informationUNS:C70250, C70320 EN:CW112C
Rendering date: 2018-02-01 13:53:55 http://conductivity-app.org CuNi3Si UNS:C70250, C70320 EN:CW112C Manufactures list: Diehl Metall Stiftung & CO.KG (http://www.diehlmetall.de) - CuNi3Si (SB26) KM Europa
More informationCopper & Copper Alloys CuZn40Pb2 (OF 2357)
Copper and Copper Alloys Page 1 of 6 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 57.0 Rem. 1.6 - - - - - - - - - - max. 59.0-2.2
More informationHigh Performance Alloys. Characteristics. Stamped parts connectors Relay springs Semiconductor components. Density 8.8 g/cm³
Alloy Designation High Performance Alloys EN CuNi3Si DIN CEN/TS 13388 UNS Chemical Composition percentage Cu Rest % Ni 3 % Si.65 % Mg.15 % This alloy is in accordance with RoHS 22/96/CE for electric &
More informationNickel Based Superalloy Hastelloy B-3 (UNS N10675)
Nickel Based Superalloy Hastelloy B-3 (UNS N10675) Hastelloy B-3 is manufactured for providing excellent resistance to reducing acids at the different content %s and temperature limits. It shows better
More informationHigh Performance STOL Alloys. Characteristics. Current Carrying Capacity. Density 8.9 g/cm³. Specific heat capacity J/(g K)
Alloy Designation High Performance STO Alloys EN - DIN CEN/TS 13388 - UNS Chemical Composition percentage Cu Rest % Ni 1.4.. 1.7 % Si 0.2.. 0.35 % Sn 0.02.. 0.3 % Zn 0.20.. 0.7 % Others 0.50 % This alloy
More informationC51100 CuSn4 Industrial Rolled
Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW45K JIS C 5111 BS PB 11 UNS Chemical Composition Weight percentage Cu C511 Rest Sn 3.5 4.5 % P.3.35 % This alloy is in accordance with RoHS
More informationIndustrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. xx xx xx xx x x. Density 8.93 g/cm³
Alloy Designation High Performance STOL Alloys EN CW 117 C* DIN CEN/TS 13388 UNS * chemical composition of STOL 8 has a higher Sn content up to,2 % We have developed a wide range of high performance alloys
More informationC27200 CuZn37 Industrial Rolled
C272 Alloy Designation EN DIN CEN/TS 13388 (2.321) CW58L JIS C 272 BS CZ 17 UNS C272 Brass Rolled Products KME offers a wide range of brass rolled products in the form of strips, sheets and discs in order
More informationCopper & Copper Alloys CuZn33Pb1.5AlAs (OF 2279)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 64.0 Rem. 1.2 - - - - 0.8-0.02 - - - max.
More informationIndustrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17.
Alloy Designation High Performance STOL Alloys EN DIN CEN/TS 13388 UNS Chemical Composition Weight percentage Cu 99. % Mg.4...9 % P.2...4 % This alloy is in accordance with RoHS 22/96/CE for electric &
More informationHigh Performance Alloys. Characteristics
Alloy Designation EN DIN CEN/TS 13388 UNS High Performance Alloys Chemical Composition Weight percentage We have developed a wide range of high performance alloys with excellent properties regarding conductivity,
More informationATI 15-7 ATI Technical Data Sheet. Semi-Austenitic Stainless Steel INTRODUCTION
ATI 1-7 Semi-Austenitic Stainless Steel (UNS S1700) INTRODUCTION ATI 1-7 Precipitation Hardening Alloy (S1700, AISI Type 632) is a chromium-nickel-molybdenum-aluminum semi-austenitic precipitation hardening
More informationBronze Rolled Products. Characteristics
Alloy Designation Bronze Rolled Products EN DIN CEN/TS 13388 CW453K JIS C 5210 BS PB 104 UNS Chemical Composition Weight percentage Cu C52100 Rest Sn 8 % P 0.1 % This alloy is in accordance with RoHS 2002/96/CE
More informationRA17-4 stainless. Introduction
RA17-4 stainless Introduction RA17-4 is an age-hardening martensitic alloy combining high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short-time, simple lowtemperature
More informationCopper & Copper Alloys
Copper and Copper Alloys Page 1 of 6 No responsibility is taken for the correctness of this information 12/2016 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.
More informationCopper & Copper Alloys CuNi1Si (OF 2403)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others Min. Rem. - - - - - 1.0-0.4 - - - - Max. - - 0.02-0.2
More informationATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718)
ATI 718 Nickel-Base Superalloy (UNS Designation N07718) INTRODUCTION ATI 718 alloy (N07718) is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately
More informationC27000 CuZn36 Industrial Rolled
C27 Alloy Designation EN DIN CEN/TS 13388 (2.335) CW57L JIS C 27 BS CZ 18 UNS Chemical Composition Weight percentage C27 Cu 63.5.. 65.5 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with
More informationCuSn0,15 (STOL 81) C14415 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 CuSn,15 CW 117 C High Performance CuSn,15 UNS * * Slight difference in chem. composition We have developed a wide range of high performance alloys with excellent properties
More informationCopper & Copper Alloys CuZn37Mn3Al2Si (OF 2291)
Copper and Copper Alloys Page 1 of 5 No responsibility is taken for the correctness of this information 05/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 58 Rem. - 0.1 0.35 1.8-1.4 0.6 - - - - max.
More informationMetallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p.
Preface p. vii Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. 3 Fabrication Characteristics p. 5 Alloy
More informationCOPPER PRODUCTS. 145 COPPER PRODUCTS Half Hard Tellurium Rounds
COPPER PRODUCTS 110 COPPER PRODUCTS Rounds... 12-2 Squares... 12-2 Flats - Square Edge...12-3 thru12-4 Flats - Full Round Edge (FRE)... 12-5 Cold Rolled Sheet... 12-6 110 Quarter Hard Copper Sheet... 12-6
More informationCopper & Copper Alloys CuZn38As (OF 2765)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 04/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 61.5 Rem. - - - - - - - 0.02 - - - max. 63.5-0.2
More informationC26800 CuZn33 Industrial Rolled
C268 Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition Weight percentage C268 Cu 66.. 68 % Zn Rest % Ni.3 % Sn.1 % Fe.5 % This alloy is in accordance with RoHS 22/96/CE
More informationStainless Steel 310/310S (UNS S31000/ UNS S31008)
Stainless Steel 310/310S (UNS S31000/ UNS S31008) Austenitic Stainless Steel 310/310S offers excellent resistance to oxidation up to 2000oF. It is a low grade steel that prevents embrittlement and sensitization.
More informationSpecification Product Form ASTM ASME AMS Federal or Military Plate, Sheet and Strip B 127 SB QQ-N-281 B 163 B165 B164 B564
ATI 400 Nickel-Base Alloy (UNS N04400) INTRODUCTION ATI 400 alloy (UNS N04400) is a ductile nickel-copper alloy with resistance to a variety of corrosive conditions. The alloy is most frequently applied
More informationCharacteristics. Current carrying Capacity. Density 8.85 g/cm³. Thermal expansion coefficient C /K
Alloy Designation STOL 94 High Performance STOL Alloys EN CuNi2,5SiZn DIN CEN/TS 13388 UNS Chemical Composition percentage Cu # Rest % Ni 1... 4. % Si.8.. 1. % Zn max. 2. % Sn max. 1. % Ag max..5 % Mg
More informationCopper & Copper Alloys CuZn38Pb2 (OF 2361)
Copper and Copper Alloys Heiligenstraße 70 41751 Viersen Phone +49 2162 956-6 FAX +49 2162 956-762 duelken@otto-fuchs.com Page 1 of 5 no responsibility is taken for the correctness of this information
More informationATI 601 ATI 601. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N06601)
Nickel-base Alloy (UNS N06601) INTRODUCTION alloy (UNS Designation N06601) is an austenitic nickel-chromium-iron alloy designed for both heat and corrosion resistance. As compared to ATI 600 alloy (UNS
More informationCopper & Copper Alloys CuZn31Si1 (OF 2270)
Copper and Copper Alloys Page 1 of 5 no responsibility is taken for the correctness of this information 02/2014 Cu Zn Pb Sn Fe Mn Ni Al Si As Co Cr Others min. 66.0 Rem. 0.1 - - - - - 0.7 - - - - max.
More informationHastelloy C-2000 (UNS N06200)
Hastelloy C-2000 (UNS N06200) Hastelloy C-2000 is a versatile alloy that provides high resistance to variety of chemicals including sulfuric acid, hydrochloric acid and other strong acidic media. It offers
More informationMaterial and Process. Specification
s 146-67- 1 of 7 Document By: Title Name 1. Purpose 1.1 This document defines approved revision levels of Material and Process specifications used by Onboard Systems. This list is for supplier reference
More informationHigh Performance Alloys. Characteristics
Alloy Designation EN DIN CEN/TS 13388 UNS High Performance Alloys Chemical Composition percentage We have developed a wide range of high performance alloys with excellent properties regarding conductivity,
More informationIndustrial Rolled. High Performance STOL Alloys. Characteristics. Capacity. Density 8.8 g/cm³. Thermal expansion coefficient C 17.
Alloy Designation High Performance STOL Alloys EN DIN CEN/TS 13388 UNS Chemical Composition percentage Cu 99. % Mg.4...9 % P.2...4 % This alloy is in accordance with RoHS 22/96/CE for electric & electronic
More informationHAYNES 188 alloy. Principal Features
HAYNES 188 alloy Principal Features Excellent High-Temperature Strength and Environment Resistance HAYNES 188 alloy (UNS R30188) is a cobalt-nickel-chromium-tungsten alloy that combines excellent high-temperature
More informationNickel Based Superalloy Incoloy 800 (UNS N08800)
Nickel Based Superalloy Incoloy 800 (UNS N08800) Nickel-Iron-Chromium alloy Incoloy 800 has fine strength and suitable resistance to oxidation and carburization at high temperatures. It offers elevated
More informationSPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES
SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES A02 (Identical with ASTM Specification A 276-97.) 1. Scope 1.1 This specification covers hot-finished or coldfinished bars except bars for reforging (Note
More informationNominal Composition. Weight % Nickel: 58 Balance Cobalt: 13.5 Iron:
HAYNES Waspaloy alloy Principle Features HAYNES Waspaloy alloy (UNS N07001) is an age-hardenable, nickel-based superalloy with very good strength at temperatures up to about 1800 F (980 C). It is widely
More informationASTM Standards B127 B160 B161 B162 B163 B164 B165 B166 B167 B168 B333 B335 B407 B408 B409 B423
ASTM Standards : B127 Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, B160 Specification for Nickel Rod and Bar B161 Specification for Nickel Seamless Pipe and Tube B162 Specification
More informationATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)
ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper
More informationUNS:C70260, C64700 EN:CW111C
Rendering date: 2017-12-01 16:18:32 http://conductivity-app.org CuNi2Si UNS:C70260, C64700 EN:CW111C Manufactures list: Diehl Metall Stiftung & CO.KG (http://www.diehlmetall.de) - CuNi2Si (SB22) Wieland-Werke
More informationMuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4
MuShield s High Permeability Magnetic Shielding per ASTM A753 Alloy Type 4 Available in coil, sheet, rod, billet, wire, and bar form, MuShield s High Permeability Magnetic Shielding is a soft magnetic
More informationHAYNES 25 alloy. Principle Features
HAYNES 25 alloy Principle Features Excellent High-Temperature Strength and Good Oxidation Resistance HAYNES 25 alloy (UNS R30605) is a cobalt-nickel- chromium-tungsten alloy that combines excellent high-temperature
More informationStandard Specification for Copper-Beryllium Alloy Wire 1
Designation: B 197/B 197M 01 Standard Specification for Copper-Beryllium Alloy Wire 1 This standard is issued under the fixed designation B 197/B 197M; the number immediately following the designation
More informationContinuous Casting Mould Plates For Slab/ Bloom/ Beam Blank/ Vertical Casters
R Complete Competence in Copper Continuous Casting Mould Plates For / Bloom/ Beam Blank/ Vertical Casters Mould Plate Bloom Mould Plate Beam Blank Mould Plate Casting Bloom Casting Beam Blank Casting s
More informationIncoloy Alloy 800H/800HT (UNS N08810/088011)
Incoloy 800H/800HT (UNS N08810/088011) Incoloy 800H/HT is an outstanding corrosion resistant alloy that is recommended for use in the high temperature industrial conditions. It has higher strength than
More informationHastelloy G-30 (UNS N06030) Chemical Composition
Hastelloy G-30 (UNS N06030) Hastelloy G-30 is commonly used for providing excellent resistance to chemical conditions. It offers resistance to nitric acid, phosphoric acid, hydrochloric acid and hydrofluoric
More informationStainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties
Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two
More informationCONSIDER BRUSH ALLOY 174
Brush performance alloys CONSIDER BRUSH ALLOY 174 Engineered to carry high current with lower temperature rise, predictable normal forces and an improved formability to strength ratio, Brush Alloy 174
More informationThyssenKrupp Materials NA
Copper & Alloys COPPER BRASS BRONZE BEARING BRONZE LEADED BRONZE PHOSPHOR BRONZE MANGANESE BRONZE ALUMINUM BRONZE SILICON BRONZE NICKEL SILVER A ThyssenKrupp Services company ThyssenKrupp Materials NA
More informationGuide to Copper Beryllium
Guide to Copper Beryllium strip Guide to Copper Beryllium rod wire bar tube plate Brush Wellman is the leading worldwide supplier of High Performance Copper Alloys, including Copper Beryllium. We provide
More informationT :
Aluminium Stock www.cncdirect.co.nz T : +64 9 622 2169 www.highgrademetals.co.nz About CNC Direct Limited was established by David Thumath in 2007 to supply quality well priced machine tools into the New
More informationATI 418 SPL alloy is readily forgeable and has fair machinability and cold formability in the annealed condition.
ATI 418 SPL Stainless Steel (UNS S41800) GENERAL PROPERTIES ATI 418 SPL alloy (Greek Ascoloy) is a corrosion and heat resistant stainless steel similar in many respects to Type 410 but exhibiting improved
More informationDAIMLERCHRYSLER CORPORATION
DAIMLERCHRYSLER CORPORATION No: MS-8580 Material Standard Date Published: 2003-07-30 Category Code: C-3 Change: G EASL Req.: No RESTRICTED: No WROUGHT ALUMINUM AND ALUMINUM ALLOYS 1.0 GENERAL 1.1 Purpose
More informationDatasheet for Steel Grades Carbon Steel SAE J403
This page is mainly introduced the SAE J403 Datasheet, including chemical information,mechanical properties, physical properties, mechanical properties, heat treatment, and Micro structure, etc. It also
More informationC26800 CuZn33 Industrial Rolled
Alloy Designation EN DIN CEN/TS 13388 CW56L JIS C 268 BS CZ 13 UNS Chemical Composition percentage C268 Cu 67 % Zn Rest % This alloy is in accordance with RoHS 22/96/CE for electric & electronic equipments
More informationThe ATI 17-4 precipitation hardening stainless steel (S17400) is covered by the following wrought product specifications.
ATI 17-4 Precipitation Hardening Stainless Steel (UNS S17400) INTRODUCTION ATI 17-4 precipitation hardening stainless steel (S17400), Type 630, is a chromium-nickel-copper precipitation hardening stainless
More informationAlloy Conductors. Percon Alloys. Percon HS95: A high strength, high conductivity conductor with 655 N/mm 2 strength and 63% IACS.
ALLOY CONDUCTORS Alloy Conductors RoHS compliant alloy conductors were originally invented by Fisk Alloy. Continuously innovating, we now produce a family of high performance alloy conductors, PERCON.
More informationATI 201 HP /ATI 201L HP
Stainless Steel: Austenitic (UNS S20100 and S20103) GENERAL PROPERTIES and L austenitic stainless steels belong to the 200 series of Cr-Mn-Ni stainless alloys, which are similar to the 300 series of Cr-Ni
More informationControl Lines & Flatpacks Control Line
CONTROL LINE MANUFACTURING This range includes control lines (hydraulic tubing) designed for use in harsh environments such as those created by chemical injection or well monitoring and other applications
More informationVDM Alloy 80 A Nicrofer 7520 Ti
VDM Alloy 80 A Nicrofer 7520 Ti Material Data Sheet No. 4048 February 2017 February 2017 VDM Alloy 80 A 2 VDM Alloy 80 A Nicrofer 7520 Ti VDM Alloy 80 A is a nickel-chromium alloy that can be age-hardened.
More information15-5 PH STAINLESS STEEL
Aerospace Chemical Food Processing Metalworking Paper Industries AK STEEL offers a combination of high strength and hardness, good corrosion resistance plus excellent transverse mechanical properties.
More informationINCOLOY alloy 803. Publication Number SMC-033 Copyright Special Metals Corporation, 2004 (Sept 04)
INCOLOY alloy 83 (UNS S3545), an iron-nickelchromium alloy, is designed for use in petrochemical, chemical and thermal processing applications. The nickel and chromium contents of alloy 83 are higher than
More information201 STAINLESS STEEL. Appliances. Architectural Applications. Automotive Trim. Cooking Utensils
201 STAINLESS STEEL Appliances Architectural Applications Automotive Trim Cooking Utensils TYPE 201 is an austenitic, chromium-nickel-manganese stainless steel that was developed originally to conserve
More informationGlossary of Steel Terms
Glossary of Steel Terms Steel Terms Explained. Below we list some of the most common steel terms and explain what they mean. AISI Alloy Alloy Steel Annealing ASTM Austenitic Bar Brinell (HB) Bright Drawn
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION Licensed to Juan Rodriguez AMS 5754M Issued MAY 1954 Revised AUG 2007 Superseding AMS 5754L Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 47.5Ni
More informationATI 13-8 ATI Technical Data Sheet. Precipitation Hardening Alloy INTRODUCTION FORMS AND CONDITIONS. (UNS S13800, ASTM Type XM-13)
ATI 13-8 Precipitation Hardening Alloy (UNS S13800, ASTM Type XM-13) INTRODUCTION ATI 13-8 alloy (UNS S13800) is a martensitic precipitation-hardening stainless steel that has excellent strength, high
More informationUltimate Tensile Range (ksi min) Maximum Working Temp. 250 F 449/ /125 (class I) 250 F 425 F 325/ F 300/ F 242/ F 242/211
Properties Alloy Steel Music Wire ASTM A228 UNS K08500 & G10860 Cold drawn. Constant tensile strength. Highquality and good for high cycle spring 250 F 449/230 (E) 30 (G).012 to.250 High Carbon Steel Wire/Bar
More informationZINC DIE CASTING ALLOYS
ZINC DIE CASTING ALLOYS Overview Eastern Alloys manufactures the complete range of zinc die casting alloys. ZAMAK alloys were first developed during the 1920's by The New Jersey Zinc Company. The name
More informationSTAINLESS STEEL SHEETS
STAINLESS & NICKEL ALLOY CHATHAM STEEL CORPORATION 59 STAINLESS STEEL SHEETS TYPE 04, 04L, 6, 6L No. 2B Finish Cold Rolled, Annealed *No. 2D Finish No. Finish Polished One Side No. 4 Finish Polished One
More informationTypes : HYDRAULIC TUBE HORN TUBE CAPILLARY TUBE
Inconel alloys are oxidation and corrosion resistant materials well suited for service in extreme environments. It is common in gas turbine blades, seals, and combustors, as well as turbocharger rotors
More informationPercon 17 Copper Alloy Conductor Wire
Introduction Percon 17 was developed to replace cadmium copper C162, specifically soft temper cadmium copper. This alloy is also available in hard temper. Key Attributes Is not engineered for Conductors
More informationCustom 450 Stainless Steel, UNS S45000
Custom 450 Stainless Steel, UNS S45000 Shaped, Flat, Square, Round, Fine Wire, Plated and Bare Wire Specifications: AMS5763, AMS 5773, AMS 5863, ASTM A 564, ASTM A693, ASTM A 959 Custom 450 Alloy Description
More informationThe Oil and Gas Industry s Premier Source for. Bar & Tubing Products
The Oil and Gas Industry s Premier Source for Bar & Tubing Products Alloy Steel Bars AISI OF STEEL AVERAGE PROPERTIES TYPICAL HARDNESS BHN RELATIVE MACHINABILITY BASED ON AISI 1212 AS 100 NACE MRO1-75
More informationSANDVIK NANOFLEX STRIP STEEL
SANDVIK NANOFLEX STRIP STEEL DATASHEET Sandvik Nanoflex is a precipitation hardening, austenitic stainless steel specifically designed for applications requiring high strength and good ductility. Mechanical
More informationINCONEL alloy 693. Publication Number SMC-043 Copyright Special Metals Corporation, 2005 (Feb 05)
www.specialmetals.com alloy 693 - Excellent Resistance to Metal Dusting and High Corrosion alloy 693 (UNS N6693) is a new alloy from Special Metals which offers resistance to high temperature corrosion
More informationCORROSION-RESISTANT ALLOYS
CORROSION-RESISTANT ALLOYS HASTELLOY B-3 alloy A nickel-molybdenum alloy with outstanding resistance to hydrochloric and sulfuric acids in the as-welded condition and excellent thermal stability. Contents
More informationMMPDS January 2003 CHAPTER 7
CHAPTER 7 MISCELLANEOUS ALLOYS AND HYBRID MATERIALS 7.1 GENERAL This chapter contains the engineering properties and related characteristics of miscellaneous alloys and hybrid materials. In addition to
More informationNiSPAN-C 902 (Alloy 902), UNS N09902
NiSPAN-C 902 (Alloy 902), UNS N09902 AMS 5221, AMS 5223, AMS 5225 Alloy 902 Wire Description Alloy 902is a precipitation hardenable nickel-iron with a controllable thermoplastic coefficient which is the
More informationImpact 7 Steel. A Durable, Dependable Steel Solution For Harsh Environments. Technical Data. Alloy Description. Alloy Type. Typical Applications
Impact 7 Steel Technical Data A Durable, Dependable Steel Solution For Harsh Environments Alloy Description As a world leader in steel manufacturing, TimkenSteel specializes in providing custom steel solutions
More informationSPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS
2007 SECTION II, PART A SA-479/SA-479M SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS SA-479/SA-479M (Identical with ASTM Specification A 479/A 479M-04
More informationBeryllium Copper (BeCu) Fingerstrip Gaskets
Beryllium Copper (BeCu) Fingerstrip Gaskets EMC and Thermal Management Solutions Fothershield UNIT 3 GORRELLS WAY, TRANSPENNINE TRADING ESTATE, ROCHDALE, LANCS, UK. OL11 2PX E info@fothershield.co.uk T
More information316Ti Stainless Steel, UNS S31635
316Ti Stainless Steel, UNS S31635 Shaped, Flat, Square, Round, Fine Wire, Plated and Un-plated ASTM A240 316Ti Alloy Description Type 316Ti is a titanium stabilized variation of alloy 316. This austenitic
More informationSection 906. STRUCTURAL STEEL
906.01 Section 906. STRUCTURAL STEEL 906.01. General Requirements. Finished rolled shapes must be free from imperfections that affect strength and durability in accordance with ASTM A 6. Rolled shapes
More informationHeat Treating Copper Beryllium Parts
Heat Treating Copper Beryllium Parts Heat treating is key to the versatility of the copper beryllium alloy system. Unlike other copper base alloys which acquire their strength through cold work alone,
More informationCuSn0,5 UNS:C18835 EN:CW129C. Rendering date: :32:23
Rendering date: 2018-09-26 21:32:23 http://conductivity-app.org CuSn0,5 UNS:C18835 EN:CW129C CuSn(CuSn0,2 - CuSn0,5) material with 0,2-0,55% is tin addition id single phase copper alloy with good mechanical
More informationStandard Classification for Temper Designations for Copper and Copper Alloys Wrought and Cast 1
This document is not an ASTM standard and is intended only to provide the user of an ASTM standard an indication of what changes have been made to the previous version. Because it may not be technically
More informationAluminum 6061-T6; 6061-T651
Aluminum 606 I -T6; 606 l -T651 Aluminum 6061-T6; 6061-T651 Categories: Metal; Nonferrous Metal; Aluminum Alloy; 6000 Series Aluminum Alloy Material Notes: General 6061 characteristics and uses: Excellent
More informationDATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING
DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS ALLOYS AND PROCESSING ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance
More informationPetrochemical and. Chemical Industry Processing. Applications Potential
15-5 PH STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Aerospace Food Processing Paper Metalworking Petrochemical and Chemical Industry Processing Applications Potential 15-5 PH Stainless Steel offers
More informationINCONEL DATA SHEET
IS A NICKEL CHROMIUM ALLOY UTILIZED FOR APPLICATIONS THAT OBLIGE RESISTANCE TO CORROSION AND HEAT. THESE NICKEL ALLOYS EMERGE BECAUSE OF ITS RESISTANCE TO HIGH TEMPERATURE OXIDATION, REMAINING EXCEPTIONALLY
More informationDATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS
DATA SHEET ZERON 100 UNS S32760 THE GLOBAL LEADER IN SPECIALTY ALLOYS corrosion resistant alloys ZERON 100 Data Sheet Contents Specifications, Chemical Composition, Applications and Features...2 Performance
More informationINCONEL alloy 706. Table 2 - Physical Constants
www.specialmetals.com INCONEL nickel-iron-chromium alloy 76 (UNS N976) is a precipitation-hardenable alloy that provides high mechanical strength in combination with good fabricability. The characteristics
More information301 STAINLESS STEEL. Aircraft Structural Parts. Automotive Trim. Cooking Utensils. Roof Drainage. Subway Cars
301 STAINLESS STEEL Aircraft Structural Parts Automotive Trim Cooking Utensils Roof Drainage Subway Cars TYPE 301 is an austenitic, chromium-nickel stainless steel. This alloy is non-magnetic in the annealed
More informationMaterial Specification
Semi-finished products Material Specification for strips of SPECIAL ALLOYS and COPPER Quality is our standard since 1864 Rolled products Special alloys - mechanical properties Alloy Temper Tensile strength
More informationARCAP AP1D AP1D lb/in³ 8.8 g/cm³ 240 Ohm circ mil/ft 40 microohm cm 212 F 572 F 932 F 1112 F 1832 F 100 C 300 C 500 C 600 C 1000 C
Identification VMI No. UNS No. Relevant Specifications Forms Description ARCAP C76350 n/a Strip Wire Bar Sheet Free Cutting bar and wire. Chemical Composition (%) Copper (+Silver) 61 Nominal Nickel (+Cobalt)
More informationAEROSPACE MATERIAL SPECIFICATION
AEROSPACE MATERIAL SPECIFICATION AMS 5659L Issued SEP 1965 Revised JAN 2004 Superseding AMS 5659K Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30CB (Nb) - 3.5Cu
More informationHASTELLOY B-3 alloy Principal Features
HASTELLOY B-3 alloy Principal Features Exceptional resistance to HCl and H 2 SO 4 and enhanced structural stability HASTELLOY B-3 alloy (UNS N10675) exhibits extremely high resistance to pure hydrochloric,
More information