Cathodic Protection Electrolytic Antifouling

Size: px

Start display at page:

Download "Cathodic Protection Electrolytic Antifouling"

Whitney Carol Harper
5 years ago
Views:

1 Cathodic Protection Electrolytic Antifouling

CATHWELL AS Cathodic Protection Electrolytic Antifouling Business concept Cathwell AS is specialized in providing solutions for cathodic protection and water treatment for

In 2011 the company went through a revitalisation process changing its name to Cathwell AS.

Markets Cathwell covers a wide range of applications including vessels, subsea structures, mobile rigs & FPSO s, wind turbines and various onshore structures.

2 CATHWELL AS Cathodic Protection Electrolytic Antifouling Business concept Cathwell AS is specialized in providing solutions for cathodic protection and water treatment for maritime, offshore and onshore markets. Origin Cathwell AS, previously known as Active Cathodic Protection, was founded in In 2011 the company went through a revitalisation process changing its name to Cathwell AS. Cathwell AS acquired a cathodic protection segment from the paint company Jotun in 2003, when Jotun decided to phase out this business. Markets Cathwell covers a wide range of applications including vessels, subsea structures, mobile rigs & FPSO s, wind turbines and various onshore structures. International network Cathwell s main office is in Norway. The sales and service agents are represented in: Norway: Head office Denmark: Sales agent Poland: Service agent Greece: Sales agent France: Sales agent China, Hong Kong: Sales agent China, Shanghai: Sales & service agent Singapore: Sales & service agent USA: Sales & service agent

ELECTROLYTIC ANTIFOULING By impressing DC current through the antifouling anodes, dissolved ions will flow through the

Anode rods in sea chests The anode rods (copper and aluminium or iron) are preferentially installed in the sea chests

Anode rods in strainers The antifouling anodes may be installed in the strainers, either in addition to or as an

Box coolers Copper rod anodes are located below the box cooler tubes to provide an even distribution of copper ions to

The system control unit is continuously maintaining the correct current output in order to obtain sufficient amount of

3 ELECTROLYTIC ANTIFOULING By impressing DC current through the antifouling anodes, dissolved ions will flow through the cooling system preventing biological marine fouling. Anode rods in sea chests The anode rods (copper and aluminium or iron) are preferentially installed in the sea chests to treat the seawater before entering the piping system. Anode rods in strainers The antifouling anodes may be installed in the strainers, either in addition to or as an alternative to location in sea chests. Box coolers Copper rod anodes are located below the box cooler tubes to provide an even distribution of copper ions to the box cooler. The system control unit is continuously maintaining the correct current output in order to obtain sufficient amount of copper ions in the seawater surrounding the box cooler. Antifouling anodes Anode material: Cu, Fe and Al Anode diameter: ø mm Anode length: 0.1 to 2 m Cofferdams for flange mounting or welding CathFlow control unit 15 V / 3 A per channel 230 V, 50/60 Hz, 1 phase mains input THD (Total Harmonic Distortion) less than 5 % Individual channel adjustment and readings Computerized operation, with automatic logging and remote operation

IMPRESSED CURRENT (ICCP) Advantages of ICCP vs sacrificial anodes Fuel cost

Longer operational lifetime than sacrificial anodes (no need for replacement

breakdown than sacrificial anodes) Continuously monitoring and automatic

anodes and reference electrodes from Cathwell can be replaced while vessel is

Mechanical reinforced (solid Ti base). MMO coated with neoprene encapsualtion.

Prepared for void spaces and water ballast tanks.

MMO/Ti anode with neoprene encapsulation.

4 IMPRESSED CURRENT (ICCP) Advantages of ICCP vs sacrificial anodes Fuel cost saving achieved by a smooth hull surface (no drag as by sacrificial anodes) Longer operational lifetime than sacrificial anodes (no need for replacement every dry-docking) Unlimited protection capacity (accepts higher coating breakdown than sacrificial anodes) Continuously monitoring and automatic adjustment of the protection level As opposed to most other ICCP systems the anodes and reference electrodes from Cathwell can be replaced while vessel is floating, by use of divers. ADS-1 anode with cofferdam A output. Mechanical reinforced (solid Ti base). MMO coated with neoprene encapsualtion. Fully recessed and diver changeable. Prepared for void spaces and water ballast tanks. ADS-2 anode with cofferdam A output. MMO/Ti anode with neoprene encapsulation. Fully recessed and diver changeable. Prepared for void space and water ballast tanks. ADS-3 anode A output. MMO/Ti anode with neoprene encapsulation. Fully recessed and diver changeable. Prepared for installation in void space and water ballast tanks.

Current from the control unit is flowing from the

signal measured by the reference electrodes.

neoprene encapsulation. +/- 30 mv accuracy.

CathSense control unit Module based, compact and

5 Current from the control unit is flowing from the anodes, through the seawater to the hull providing corrosion protection. The level of protection is controlled by a potential signal measured by the reference electrodes. RSH anode and cofferdam Zinc reference electrode with neoprene encapsulation. +/- 30 mv accuracy. Fully recessed and diver changeable. CathSense control unit Module based, compact and lightweighted with high regulation accuracy and flexibility. Computerized dashboard based operation, with automatic logging and remote operation. Capacity 27 V / A. Propeller shaft grounding Grounding device either with solid silver slip ring or silver band around the propeller shaft. Double contact brushes and monitoring device are standard.

6 SACRIFICIAL ANODES Sacrificial anodes on ship hulls and ballast/cargo tanks protects steel and preserves coatings. A great variety of welded and bolted ballast tank anodes with different fastening devices are available. Customised anode types and shapes can be produced on request.

STANDARD FLUSH ANODES ALUMINIUM AND ZINC Most anode types and sizes can be supplied. Customized anode are available upon request. Standard flush anodes are for welding.

Standard ALUMINIUM flush anodes Anode Weight (kg) Dimensions (mm) Type Gross Net L1 L2 H W 2-AL 0.2 0.15 90 164 23 46 4-AL 0.4 0.3 120 210 28 62 A-10 1.0 0.8 205 280 25 82 15-AL 1.5 1.

7 STANDARD FLUSH ANODES ALUMINIUM AND ZINC Most anode types and sizes can be supplied. Customized anode are available upon request. Standard flush anodes are for welding. Bolt holes in steel inserts to be provided upon request. Doubler plates for flush anodes are available in different sizes. Standard ALUMINIUM flush anodes Anode Weight (kg) Dimensions (mm) Type Gross Net L1 L2 H W 2-AL AL A AL AL A A AL A A AL A AL AL A AL A A AL A AL AL Geometric variations between the different anodes types may occur. Standard ZINC flush anodes Anode Weight (kg) Dimensions (mm) Type Gross Net L1 L2 H W 2-Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Z Aluminium anodes Capacity: 2651 Ah/kg Consumption rate: 3.3 kg/ayear Specific gravity: 2.78 kg/dm 3 Closed circuit potential: mv vs Ag/AgCl/seawater Zinc anodes Capacity: 780 Ah/kg Consumption rate: 11.2 kg/ayear Specific gravity: 7,13 kg/dm 3 Closed circuit potential: mv vs Ag/AgCl/seawater

8 Cathwell AS Visiting address: Kongshavnsgate 18, NO-3970 Langesund, Norway Postal address: PO Box 68, NO-3993 Langesund, Norway Tel ,

Cathodic Protection Electrolytic Antifouling

Cathodic Protection Electrolytic Antifouling CATHWELL AS Cathodic Protection Electrolytic Antifouling Business concept Cathwell specialises in design, manufacture and supply of systems for cathodic protection