STP672-EB/JUI Index

Size: px
Start display at page:

Download "STP672-EB/JUI Index"

Transcription

1 STP672-EB/JUI Index Accelerated cooling in controlled rolling, effect on microstructure and properties in Arctic steels, Acicular ferrite, Aging In hydrogen environment, Precipitation in Custom 450, Alloy additions Effect on hardenability in carburizing steels, Effect on strength in ferritic SS, Effect on toughness in ferritic SS, Effect on strength in austenitic SS, Effect on Arg in line pipe steels, In high temperature alloys, In microalloyed steels, effects on SSCC, 58 Alloy design in steels, Alloy type A286, 529, 533, 534, 537, 542 A535 B, AF 115, 576 ASA, 52 Astroloy, 541, 551, 560 Corten B, 58 CoTaC, 505 Cr-Mo steels, Cr-Mo-V steels, Custom 450, EX-32, EX-55, HK-40, HSLA steels, 35-51, 53-72, , , HS-188, 510 HastelloyX, ,529 IN-100, , IN-102, 500 IN-626, 500 IN-738, IN-706, , 537 Inco Alloy D, Incoloy 800, , Inconel 751, , 596 MC 20, Mo-Nb steels, N-155, 594 Ni-Cr-Mo-V steels, NiTaC-13, 505 Nimonic 80A, 500, , 592 Nimonic 90, 529 Nimonic 100, 529 Nimonic 115,500,501 Nimonic PE-16, 497 Pyromet31,544, 597 Pyromet CTX-1, 528, 534, Pyromet CTX-2, Copyright' 1979 by AS IM International

2 644 MICON 78 Rene 95, 541, 551, 560, SAE 4800, SAE 9300, l<isl-rb Sandvik 12R72, Sandvik 12RN72, Silchrome 10, 597, 598 Stellite 6, 591, 592, Super Waspaloy, Uranus 50, V57, 534 Vasco-MA, 17 Waspaloy, , 534, 535, Wnr 4439, C-5MO steel, 15 5 Cr-Mo-V steel, PH, N, 591, N, Cr^Mo SS, Cr-4Mo-2Ni SS, SS, , , , ,407, SS, , L SS, SS, alloy, , 534,535,537, 541, 542, alloy, 532, 534, 535, 541, 542 Alpha prime Effect on 475 C embrittlement, Effect in duplex SS, Precipitation in ferritic SS, Aluminum Effect on carbide precipitation, Effect on strength and toughness in 4340, Accicular ferrite structures, 248 Aluminum-silicon interaction in steels, Anisotropy, effect on mechanical properties in duplex SS, Argon Entrapment in PM superalloys, Entrapment, effect of powder size on, 638 Oxygen decarburization, 522 Oxygen degassing, 636 Austenite Effect on corrosion resistance, 380 Precipitation in ferrite, Structural control in rolling, Austenitic SS, Average strain ratio in ferritic SS, 278 B Blistering, Boron Effect on temper embrittlement, 245 Role in austenitic SS, 395 British Petroleum HIC testing, Carbide Distribution, effect on yield strength in martensite, In high temperature alloys, 532, 533 Morphology, effect on tepjper embrittlement, Volume fraction, primary, 17 Carbon Content, effect in line pipe steels, 251

3 INDEX 645 Content in Waspaloy and Super Waspaloy, 639, 640 Content, relation to strength in martensitic SS, Effect in austenitic SS, 393 Effect on proof stress, Role in ferritic SS, 271 Carburized specimens, mechanical testing of, ,257 Chemistry-processing-properties interrelationship in line pipe steels, Chi Embrittlement, Precipitation in duplex SS, 436 Chordal fatigue, 592, 593 Chromium Carbide continuity, effect on IGSCC, 331 Carbide M23C6 detectability, 467 Carbide precipitation M7C3 and M23C6 in duplex SS, 433,434 M23C6 in Waspaloy, Carbide quantification, Depletion, effects on IGSCC, Depletion in austenitic SS, 465, 466 Effect on embrittlement in ferritic SS,335 Effect on 475 C embrittlement, 337 Effect on SCC resistance, 421, 422 In microalloyed steels, effect on HIC, Replentishment in austenitic SS, 466 Role in austenitic SS, 279 Role in ferritic SS, 271 Cladding in nuclear reactors, 633, 634 Coal Gasification, 482 Gasification, materials problems, Combustion, 481 Conversion, 481 Conversion, pressurized fluid bed, 488 Conversion, pressurized fluid bed; materials problems, in, Liquefaction, 486, 487 Liquefaction, material problems in, 487 Pretreatment, 484 Utilization, 481,482 Contamination in PM superalloys, Corrosion Locallized, relation to microstructure in duplex SS, Mechanism in exhaust valves, Pitting, in duplex SS, Corrosive media ASTM A262/B, , 410 ASTM A262/A B and E, ASTM A262E, 431, Carbonate, 585, 586 Carburizing, 402, 403 Ferric chloride, 336, 379 Ferric sulfate, 422, 423 Formic acid, 423, 424 Halogen, 585, 586 Hydrochloric acid, anodic, 431, Hydrogen sulfide, Lead oxide, 586 Magnesium chloride, 377, 378, , 470 Methane-steam, Nitric acid, 336

4 646 MICON 78 Sodium chloride, 379 Steam, 402 Sulfide, 53-56, 544, 586, 594, 595, 597 Sulfuric acid, 379 Vanadium pentoxide, 586 Water, high temperature, 309 Crystallographic texture in austenitic SS, Embrittlement 475 F, in duplex SS, , F, in ferritic SS, F, in 29Cr-4Mo SS, High temperature, Exhaust valve design, Explosive forming, 463, 464 D Deformed ferrite, Deformed ferrite percentage Effect on tensile properties in Mo-Nb steel, Effect on impact properties, 141 Delta ferrite in martensitic SS, 264 Dislocation Density, effect on yield stress, 266 Density in martensite, Substructure, effect on tensile properties in Mo-Nb steel, Substructure in steel, 248 Ductile to brittle transition temperature in a ferritic SS, DuctDity of austenitic SS, Duplex stainless steel, , , Fatigue Crack growth rate in carburizing steel, High temperature, Ferrite Composition in duplex SS, Deformation, Grain size control, Morphology, effect of heat treatment on, Ferritic stainless steels, physical metallurgy of, Forest dislocation strengthening, 248 Forging of high temperature alloys, , 555, 556 Formability of austenitic SS, Formability of ferritic SS, Fracture toughness, effect of alloying additions on, E Electric arc furnace melting, 519, 520 Electrochemical potentiokinematic reactivation, 310 Electron beam Melting, 522, 523 Remelting, 524, 525 Electroslag melting, 524 Gamma prime Composition, 548 Morphology, In Waspaloy, Solvus, 655 Volume fraction, effect superplasticity, 542 In Inco 800, on

5 INDEX 647 Gas turbines, Gatorizing, 541, 542 Grain boundary migration, Grain refinement, effects on properties in HSLA steels, 35 In super Waspaloy, 608 In ferritic SS, 462, 463 Grain size Austenitic, effect on transformation structure, Effect on tensile properties in Mo-Nb steel, Effect on temper embrittlement, 173 Effect on yield strength in tempered martensite, 267 Effect on impact transition temperature, , Effect on strength in ferritic SS, Effect on strength in austenitic SS, Effects in line pipe steels, Limiting recrystallized austenitic, Guttering, 586, 597 H Hardener content in high temperature alloys, 565, 566 High temperature gas reactors, 498, 499 Materials problems, Homogenization of high temperature alloys, Hot isostatic pressing, , Hydrogen Effect on second phase nucleation, Induced cracking in microalloyed steels, 53-54, Induced cracking in HAZ of line pipe steel, 164, 250 Interaction with lattice defects, 382, 383 IGSCC, heat to heat variation, Impact properties, effect of rolling temperature on, Impact transition temperature, microstructural factors, Impurity elements, effect on temper embrittlement, Inclusion shape, effect on HIC, 56, 60, Ingot Characteristics of high temperature alloys, Conversion of high temperature alloys, LMFBR, Materials problems, 4%-498 Low temperature sensitization, 333 Luders extension, effect of rolling temperature on, 151 M Md in austenitic SS, 463 Manganese Effect on ferrite formation, Effect on grain size in Mo, Nb steel, 149 Martensitic transformation in austenitic SS, 280, Mechanical property prediction, line pipe steels, 92-95

6 648 MICON 78 Microchemical analysis, 329 Micrograin processing, 541 Microstructural changes in controlled rolling of X-70, nolo Minigrain processing, 541 Molybdenum Effect on corrosion resistance, 469 Effect on embrittlement in ferritic SS, 335 Effect on temper embrittlement, 243 Role in austenitic SS, 394 N Nickel, effect on SCC resistance, Niobium carbonitride precipitation, effect on tensile properties in Mo-Nb steel, 136 Nitrogen Effect on proof stress in martensitic SS, Effect on strength in austenitic SS, Nonmetallic inclusions, effect on SSCC, 56 O Oxidation, intergranular, 500, 501, 619 Phosphorus-obom interaction, effect on temper embrittlement, 245 Powder metallurgy Defects, Of high temperature alloys, , , Precipitate area fraction and sized distribution, 'recipitation Effects in microalloyed steels, 36 Reactions in high temperature alloys, Reactions in Waspaloy, 606 Reactions in Super Waspaloy, Recrystallization interaction, Strain induced, Processing control of high temperature alloys, Property variation across pipe wall, 249, Quantitative metallography of transformation products in steel, R /?-phase precipitation in duplex stainless steel, 436 Radiation damage, 496, 497, 633 Rare earth additions, Recrystallization Dynamic, Metadynamic, Of304SS, Of 4439, Retardation of in HSLA steels, Regression analysis correlation, chemistry, processing and microstructure in line pipe steels, Regression analysis correlation, chemistry, processing and properties in line pipe steels, 89-99

7 INDEX 649 Rolling parameters, effects on mechanical properties, Roping in ferritic SS, 279 Secondary hardening alloys, Sensitization, effect of pre-existing strain on, Sensitization in austenitic SS, Sigma Effect on corrosion resistance, 326 Formation in duplex SS, In Inco 800, 626 SiUcon Effects on carbide precipitation, Effect on SCC, 470 Effects on strength and toughness of 4340, Role in arctic line pipe, 201 Single crystal superalloy blades, 634, 635 Slab reheating temperature, effect on toughness, Solid state reactions in steel, Splitting, , 123, 166 Steam/gas turbine combined cycles, 492 Materials problems, Step cooling, Umitations in temper embrittlement evaluations, Strain age cracking, 599 Strap test, limitation of, , , Strength-toughness optimization, microstructural factors, Stretch formability in austenitic stainless steel, Strengthening mechanisms In accelerated cooling, In austenitic SS, In ferritic SS, In martensitic SS, Sulfide stress corrosion cracking, 53-62, 64, 69, Sulfide stress corrosion cracking test method, Superalloys Cast, Eutectic, 505 Forgings, Investment castings, Sheet, 510 Single crystal, 634, 635 Types, Utilization in energy systems, 501, 502 Oxididispersion strengthened, Super Waspaloy, processing, Temper embrittlement Effect of impurity elements on, Effect of molybdenum on, 243 In Cr-Mo steels, In Cr-Mo-V steels, In Ni-Cr-Mo-V Steels, Tempering temperature, effect on impact strength of 4340, Thermomechanical processing, effect on austenite transformation, Of high temperature alloys, 541 Titanium Effects in HSLA steels, 46 Role in austenitic SS, 395 Role in microalloy steels,

8 650 MICON 78 Toughness Of ferritic SS, Of martensitic SS, Transformation products, effect on SSCC, Tungsten, effect of hardness and toughness, U U-bend testing, Vacuum arc remelting, 523, 524 Vacuum Degassing, 521 Induction melting, 520, 521 Oxygen decarburization, 521, 522 Vanadium Effect on hardness and toughness, Effects in HSLA steels, 46 Void formation induced swelling, 4%, 497 W Waspaloy forgings, processing, Weld sensitization in 304 SS, Work hardening rate, ferritic SS, 278

Materials & Processes in Manufacturing. Introduction. Introduction ME 151. Chapter 6 Ferrous Metals and Alloys

Materials & Processes in Manufacturing. Introduction. Introduction ME 151. Chapter 6 Ferrous Metals and Alloys 2003 Bill Young Materials & Processes in Manufacturing ME 151 Chapter 6 Ferrous Metals and Alloys 1 Introduction Figure 6-1 Page 106 2003 Bill Young 2 Introduction Metals are example of a material (The

More information

Subject Index. STP1042-EB/Jul. 1989

Subject Index. STP1042-EB/Jul. 1989 STP1042-EB/Jul. 1989 Subject Index A Acicular ferrite, see Intragranular ferrite plates AFNOR NF A 81460, 195 AISI 1215 steel, 51-66 chemical analysis, 53, 56 experimental procedure, 53 hardness, 53, 58

More information

Steels Processing, Structure, and Performance, Second Edition Copyright 2015 ASM International G. Krauss All rights reserved asminternational.

Steels Processing, Structure, and Performance, Second Edition Copyright 2015 ASM International G. Krauss All rights reserved asminternational. Steels Processing, Structure, and Performance, Second Edition Copyright 2015 ASM International G. Krauss All rights reserved asminternational.org Contents Preface to the Second Edition of Steels: Processing,

More information

is detrimental to hot workability and subsequent surface quality. It is used in certain steels to improve resistance to atmospheric corrosion.

is detrimental to hot workability and subsequent surface quality. It is used in certain steels to improve resistance to atmospheric corrosion. Glossary of Terms Alloying Elements ALUMINIUM - Al is used to deoxidise steel and control grain size. Grain size control is effected by forming a fine dispersion with nitrogen and oxygen which restricts

More information

Subject Index. Acicular precipitate, duplex microstructure, A508 Class 2 steel, silicon content effect on ferrite nose position,

Subject Index. Acicular precipitate, duplex microstructure, A508 Class 2 steel, silicon content effect on ferrite nose position, STP979-EB/Feb. 1988 Subject Index A Acicular precipitate, duplex microstructure, 177 A508 Class 2 steel, silicon content effect on ferrite nose position, 71, 73 Alloy 51,238 creep strength, 253 ~/' phase

More information

High-Strength Low-Alloy Steels

High-Strength Low-Alloy Steels High-Strength Low-Alloy Steels Introduction and Overview High-strength low-alloy (HSLA) steels, or microalloyed steels, are designed to provide better mechanical properties and/or greater resistance to

More information

Fundamentals of. Steel Product. Graduate Institute of Ferrous Metallurgy

Fundamentals of. Steel Product. Graduate Institute of Ferrous Metallurgy Fundamentals of Steel Product Physical Metallurgy B.C. De Cooman Graduate Institute of Ferrous Metallurgy Pohang University of Science and Technology, South Korea J.G Speer Advanced Steel Products and

More information

ATI 332 ATI 332. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES TYPICAL ANALYSIS PHYSICAL PROPERTIES

ATI 332 ATI 332. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES TYPICAL ANALYSIS PHYSICAL PROPERTIES ATI 332 Stainless Steel: Austenitic (UNS N08800) GENERAL PROPERTIES ATI 332 alloy is a nickel and chromium austenitic stainless steel designed to resist oxidation and carburization at elevated temperatures.

More information

Index. Key to Abbreviations Used in Index T = table D = definition F = figure [ ] = see this subject under this listing

Index. Key to Abbreviations Used in Index T = table D = definition F = figure [ ] = see this subject under this listing STP610-EB/NOV. 1976 Index Key to Abbreviations Used in Index T = table D = definition F = figure [ ] = see this subject under this listing Activation energy, 157, 319 Aerospace alloys (steels), 250 Air

More information

ATI ATI 2205 Alloy (UNS S31803 and S32205) Duplex Stainless Steel. Technical Data Sheet

ATI ATI 2205 Alloy (UNS S31803 and S32205) Duplex Stainless Steel. Technical Data Sheet Alloy (UNS S31803 and S32205) Duplex Stainless Steel GENERAL PROPERTIES alloy (UNS S31803 and/or S32205) is a nitrogenenhanced duplex stainless steel alloy. The nitrogen serves to significantly improve

More information

Index. Atmosphere Effect on fatigue processes, 49, 200 Auger spectroscopy, 51 A533-B steel Mode II fracture, 235, 242 B

Index. Atmosphere Effect on fatigue processes, 49, 200 Auger spectroscopy, 51 A533-B steel Mode II fracture, 235, 242 B STP600-EB/Jun. 1976 Index Abrasion Due to crack closure, 228 On Mode II fractures, 240 AgaMg-AgMg alloys, 160, 166 AISI 1025 steel Hydrogen attack, 88 Microstructure of, 91 Tensile properties, 90 AISI

More information

ATI 2205 ATI Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205)

ATI 2205 ATI Technical Data Sheet. Duplex Stainless Steel GENERAL PROPERTIES. (UNS S31803 and S32205) ATI 2205 Duplex Stainless Steel (UNS S31803 and S32205) GENERAL PROPERTIES ATI 2205 alloy (UNS S31803 and/or S32205) is a nitrogen-enhanced duplex stainless steel alloy. The nitrogen serves to significantly

More information

SUPERALLOYS. Superalloys are high-performance materials AGE-HARDENABLE

SUPERALLOYS. Superalloys are high-performance materials AGE-HARDENABLE AGE-HARDENABLE SUPERALLOYS To select the most suitable wrought age-hardenable superalloy for a specific application, engineers must know the basic mechanical properties as well as other characteristics

More information

Chapter 11 Part 2. Metals and Alloys

Chapter 11 Part 2. Metals and Alloys Chapter 11 Part 2 Metals and Alloys Nomenclature of Steels Historically, many methods for identifying alloys by their composition have been developed The commonly used schemes in this country are those

More information

Cast steel: Group of ASTM standards for steel castings and forgings

Cast steel: Group of ASTM standards for steel castings and forgings Cast steel: Group of ASTM standards for steel castings and forgings Abstract: This group of ASTM specifications covers standard properties of steel and iron castings and forgings for valves, flanges, fittings,

More information

Alloy Steels. Engineering Materials. Introduction : Msc. Shaymaa Mahmood

Alloy Steels. Engineering Materials. Introduction : Msc. Shaymaa Mahmood Alloy Steels Introduction : Steels are, essentially, alloys of iron and carbon, containing up to 1.5 % of carbon. Steel is made by oxidizing away the impurities that are present in the iron produced in

More information

PRODUCTION OF STAINLESS STEEL POWDERS BY ADVANCED STEELMAKING TECHNOLOGY. Christopher T. Schade and John Schaberl

PRODUCTION OF STAINLESS STEEL POWDERS BY ADVANCED STEELMAKING TECHNOLOGY. Christopher T. Schade and John Schaberl PRODUCTION OF STAINLESS STEEL POWDERS BY ADVANCED STEELMAKING TECHNOLOGY ABSTRACT Christopher T. Schade and John Schaberl Hoeganaes Corporation 1001 Taylors Lane Cinnaminson, NJ 08077 USA Advanced melting

More information

Heat Treating Basics-Steels

Heat Treating Basics-Steels Heat Treating Basics-Steels Semih Genculu, P.E. Steel is the most important engineering material as it combines strength, ease of fabrication, and a wide range of properties along with relatively low cost.

More information

Incoloy Alloy 800H/800HT (UNS N08810/088011)

Incoloy Alloy 800H/800HT (UNS N08810/088011) Incoloy 800H/800HT (UNS N08810/088011) Incoloy 800H/HT is an outstanding corrosion resistant alloy that is recommended for use in the high temperature industrial conditions. It has higher strength than

More information

Steel Properties. History of Steel

Steel Properties. History of Steel History of Steel Steel Properties Cast Iron Cast iron preceded wrought iron. It is brittle, has high carbon content with low tensile strength. It has excellent casting properties. It was mainly used to

More information

NICKEL CHROMIUM ALLOYS

NICKEL CHROMIUM ALLOYS NICKEL CHROMIUM AND NICKEL THORIA ALLOYS 1 NICKEL CHROMIUM ALLOYS Two distinct groups of nickel chromium alloys for high temperature uses are as follow. The first group, which includes cast alloys containing

More information

How to make N 2 listen to you in steel making!

How to make N 2 listen to you in steel making! International Journal of Scientific & Engineering Research Volume 2, Issue 10, October-2011 1 How to make N 2 listen to you in steel making! P R Sureshkumar, D R Pawar and V Krishnamoorthy Abstract- All

More information

Structural materials for Fusion and Generation IV Fission Reactors

Structural materials for Fusion and Generation IV Fission Reactors Hungarian Academy of Sciences KFKI Atomic Energy Research Institute Structural materials for Fusion and Generation IV Fission Reactors Ákos Horváth Materials Department akos.horvath@aeki.kfki.hu EFNUDAT

More information

Alloy 20 29Ni-20.5Cr-3.5Cu-2.5Mo A351 CN7M J Mo 20Cr-18Ni-6.5Mo-N-Cu A351 CK3MCuN J93254

Alloy 20 29Ni-20.5Cr-3.5Cu-2.5Mo A351 CN7M J Mo 20Cr-18Ni-6.5Mo-N-Cu A351 CK3MCuN J93254 The typical Austentic Stainless Steel 18%Cr + 10% Ni have been adopted in corrosion resistant application for decades. In accordance with more and more application, the typical Austentic stainless steel

More information

INCONEL Alloy 706 Misty Pender

INCONEL Alloy 706 Misty Pender INCONEL Alloy 706 Misty Pender 2007 University Turbine Systems Research Fellowship University of Central Florida, Orlando, FL Electric Power Research Institute, Charlotte, NC The INCONEL 706 superalloy

More information

Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys 1

Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys 1 Designation: A 941 06a Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys 1 This standard is issued under the fixed designation A 941; the number immediately following

More information

CHAPTER INTRODUCTION

CHAPTER INTRODUCTION 1 CHAPTER-1 1.0 INTRODUCTION Contents 1.0 Introduction 1 1.1 Aluminium alloys 2 1.2 Aluminium alloy classification 2 1.2.1 Aluminium alloys (Wrought) 3 1.2.2 Heat treatable alloys (Wrought). 3 1.2.3 Aluminum

More information

Materials for elevated temperature heat exchangers in reactors

Materials for elevated temperature heat exchangers in reactors Materials for elevated temperature heat exchangers in reactors Several materials have been introduced for heat exchangers in 4 th generation extremely high temperature reactor (EHTR) also called as next

More information

ATI 15-7 ATI Technical Data Sheet. Semi-Austenitic Stainless Steel INTRODUCTION

ATI 15-7 ATI Technical Data Sheet. Semi-Austenitic Stainless Steel INTRODUCTION ATI 1-7 Semi-Austenitic Stainless Steel (UNS S1700) INTRODUCTION ATI 1-7 Precipitation Hardening Alloy (S1700, AISI Type 632) is a chromium-nickel-molybdenum-aluminum semi-austenitic precipitation hardening

More information

Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p.

Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. Preface p. vii Metallurgy, Alloys, and Applications p. 1 Introduction and Overview p. 3 Major Groups of Copper and Copper Alloys p. 3 Properties of Importance p. 3 Fabrication Characteristics p. 5 Alloy

More information

Guidelines for ASTM Specification and Metal Grades

Guidelines for ASTM Specification and Metal Grades Guidelines for ASTM Specification and Metal Grades CONTENTS 27/A 27M Standard Specification for Steel Castings, Carbon Suitable For General Applications... 1 A 128/ A 128M Standard Specification for Steel

More information

WHAT IS THE ACTUAL COST OF YOUR COMMERCIAL WATER HEATER? LOOKING BEYOND EFFICIENCY INCREASING ROI THROUGH WATER HEATER MATERIAL SELECTION

WHAT IS THE ACTUAL COST OF YOUR COMMERCIAL WATER HEATER? LOOKING BEYOND EFFICIENCY INCREASING ROI THROUGH WATER HEATER MATERIAL SELECTION Engineered Water Heating Solutions WHAT IS THE ACTUAL COST OF YOUR COMMERCIAL WATER HEATER? LOOKING BEYOND EFFICIENCY INCREASING ROI THROUGH WATER HEATER MATERIAL SELECTION Water Heater Efficiency Water

More information

TEPZZ 9 4 A_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION. (43) Date of publication: Bulletin 2015/40

TEPZZ 9 4 A_T EP A1 (19) (11) EP A1 (12) EUROPEAN PATENT APPLICATION. (43) Date of publication: Bulletin 2015/40 (19) TEPZZ 9 4_ _A_T (11) EP 2 924 131 A1 (12) EUROPEAN PATENT APPLICATION (43) Date of publication:.09.1 Bulletin 1/ (21) Application number: 14162191.2 (22) Date of filing: 28.03.14 (1) Int Cl.: C21D

More information

ATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825)

ATI 825 ATI 825. Technical Data Sheet. Nickel-base Alloy INTRODUCTION PRODUCT FORMS SPECIFICATIONS & CERTIFICATES (UNS N08825) ATI 825 Nickel-base (UNS N08825) INTRODUCTION ATI 825 alloy (UNS N08825) is an austenitic nickel-iron-chromium-molybdenum-copper alloy containing high levels of chromium, nickel, molybdenum and copper

More information

Subject Index. grain size, 508 hardening, 490 helium transport to grain boundaries,

Subject Index. grain size, 508 hardening, 490 helium transport to grain boundaries, STP955-EB/Dec. 1987 Subject Index A Alloys (See under type of alloy) Aluminum cavities near grain boundaries, 220, 233 cold working, 508 copper-aluminum alloys, 14 defects introduced by proton irradiation,

More information

ATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718)

ATI 718 ATI 718. Technical Data Sheet. Nickel-Base Superalloy INTRODUCTION FORMS AND CONDITIONS AVAILABLE SPECIFICATIONS. (UNS Designation N07718) ATI 718 Nickel-Base Superalloy (UNS Designation N07718) INTRODUCTION ATI 718 alloy (N07718) is an austenitic nickel-base superalloy which is used in applications requiring high strength to approximately

More information

Chapter 7. Stainless Steels. /MS371/ Structure and Properties of Engineering Alloys

Chapter 7. Stainless Steels. /MS371/ Structure and Properties of Engineering Alloys Chapter 7 Stainless Steels Stainless steels at least % Cr in iron is required (max 30% Cr) Cr: to make iron surface by forming a surface oxide film protecting the underlying metal from corrosion Ni: to

More information

of Metal Alloys This is just an extension of the previous chapter Hardenability of Steels: The Jominy Test

of Metal Alloys This is just an extension of the previous chapter Hardenability of Steels: The Jominy Test Chapter 11 Applications and Processing of Metal Alloys This is just an extension of the previous chapter Hardenability of Steels: The Jominy Test As usual, everything is standardized! After the Jominy

More information

SANDVIK 3R65 TUBE AND PIPE, SEAMLESS

SANDVIK 3R65 TUBE AND PIPE, SEAMLESS SANDVIK 3R65 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 3R65 is a molybdenum-alloyed austenitic stainless chromium-nickel steel with a low carbon content. STANDARDS ASTM: TP316L, TP316 UNS: S31603, S31600

More information

MSE-226 Engineering Materials

MSE-226 Engineering Materials MSE-226 Engineering Materials Lecture-7 ALLOY STEELS Tool Steels TYPES of FERROUS ALLOYS FERROUS ALLOYS Plain Carbon Steels Alloy Steels Cast Irons - Low carbon Steel - Medium carbon steel - High carbon

More information

Relationship Between Design and Materials for Thermal Power Plants. S. C. Chetal

Relationship Between Design and Materials for Thermal Power Plants. S. C. Chetal Relationship Between Design and Materials for Thermal Power Plants S. C. Chetal Contents *Introduction to design codes *Operational life vs design basis life *Material selection basics *Materials for boiler

More information

Development on V-N microalloyed forging steel used in fracture splitting connecting rods

Development on V-N microalloyed forging steel used in fracture splitting connecting rods Development on V-N microalloyed forging steel used in fracture splitting connecting rods a Xianzhong Zhang, Yuzhang Xiong and Guifeng Zhou R&D Center Wuhan Steel and Iron (Group) Corp. Wuhan, Hubei, 430081,

More information

Physcial Metallurgy and Microstructure of Superalloys

Physcial Metallurgy and Microstructure of Superalloys www.materialstechnology.org Physcial Metallurgy and Microstructure of Superalloys Roger Reed University of Birmingham The definition of superalloys utilized in the classic textbook 'The Superalloys' which

More information

Development of bimodal grain structures in microalloyed steels:

Development of bimodal grain structures in microalloyed steels: Development of bimodal grain structures in microalloyed steels: Niobium and titanium are added to high strength low alloy (HSLA) steels to provide grain boundary pinning precipitates to help produce the

More information

High strength low alloy (HSLA).

High strength low alloy (HSLA). 7 Alloy Steels High strength low alloy (HSLA). a type of steel alloy that provides many benefits over regular steel alloys contain a very small percentage of carbon (less than one-tenth of a percent) and

More information

Ultimate Tensile Range (ksi min) Maximum Working Temp. 250 F 449/ /125 (class I) 250 F 425 F 325/ F 300/ F 242/ F 242/211

Ultimate Tensile Range (ksi min) Maximum Working Temp. 250 F 449/ /125 (class I) 250 F 425 F 325/ F 300/ F 242/ F 242/211 Properties Alloy Steel Music Wire ASTM A228 UNS K08500 & G10860 Cold drawn. Constant tensile strength. Highquality and good for high cycle spring 250 F 449/230 (E) 30 (G).012 to.250 High Carbon Steel Wire/Bar

More information

ATI 418 SPL alloy is readily forgeable and has fair machinability and cold formability in the annealed condition.

ATI 418 SPL alloy is readily forgeable and has fair machinability and cold formability in the annealed condition. ATI 418 SPL Stainless Steel (UNS S41800) GENERAL PROPERTIES ATI 418 SPL alloy (Greek Ascoloy) is a corrosion and heat resistant stainless steel similar in many respects to Type 410 but exhibiting improved

More information

Steel Forgings: Design, Production, Selection, Testing, and Application. Edward G. Nisbett. ASTM Stock No. MNL53

Steel Forgings: Design, Production, Selection, Testing, and Application. Edward G. Nisbett. ASTM Stock No. MNL53 Steel Forgings: Design, Production, Selection, Testing, and Application Edward G. Nisbett ASTM Stock No. MNL53 INTERNATIONAL Standards Worldwide ASTM International 100 Barr Harbor Drive PO Box C700 West

More information

Influence of rapid cooling rates for HIP on mechanical and corrosion properties of UNS S32205

Influence of rapid cooling rates for HIP on mechanical and corrosion properties of UNS S32205 Influence of rapid cooling rates for HIP on mechanical and corrosion properties of UNS S32205 Arnulf Hörtnagl 1, Paul Gümpel 1, Michael Hamentgen², Beat Hofer³ Institute for Materials System Technology

More information

Heat and corrosion resistant alloys for chemical processing systems

Heat and corrosion resistant alloys for chemical processing systems Heat and corrosion resistant alloys for chemical processing systems Regular advancement in metallurgical and fabrication procedures had led to the development of broad range of nickel alloys and their

More information

THE ROLE OF NIOBIUM IN LOW CARBON BAINITIC HSLA STEEL. Klaus Hulka Niobium Products Company GmbH, Düsseldorf, Germany

THE ROLE OF NIOBIUM IN LOW CARBON BAINITIC HSLA STEEL. Klaus Hulka Niobium Products Company GmbH, Düsseldorf, Germany THE ROLE OF NIOBIUM IN LOW CARBON BAINITIC HSLA STEEL Klaus Hulka Niobium Products Company GmbH, Düsseldorf, Germany ABSTRACT With higher strength, weight reduction can be achieved. Besides the required

More information

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties

Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless Steel & Stainless Steel Fasteners Chemical, Physical and Mechanical Properties Stainless steel describes a family of steels highly resistant to tarnishing and rusting that contain at least two

More information

MiCon 78: OPTIMIZATION OF PROCESSING, PROPERTIES, AND SERVICE PERFORMANCE THROUGH MICROSTRUCTURAL CONTROL

MiCon 78: OPTIMIZATION OF PROCESSING, PROPERTIES, AND SERVICE PERFORMANCE THROUGH MICROSTRUCTURAL CONTROL MiCon 78: OPTIMIZATION OF PROCESSING, PROPERTIES, AND SERVICE PERFORMANCE THROUGH MICROSTRUCTURAL CONTROL A symposium sponsored by ASTM Committee E-4 on Metallography AMERICAN SOCIETY FOR TESTING AND MATERIALS

More information

When temperature is small, about 500oC or 930oF, nitrogen diffusion is nominal.

When temperature is small, about 500oC or 930oF, nitrogen diffusion is nominal. Corrosion behavior of different alloys in industrial media Stainless steels are normally inclined to nitridation attack when subjected to ammonia based conditions at high temperatures. Ammonia is a widely

More information

APPLICATION OF HIGH TEMPERATURE GRADES IN CARBON BLACK INDUSTRY

APPLICATION OF HIGH TEMPERATURE GRADES IN CARBON BLACK INDUSTRY APPLICATION OF HIGH TEMPERATURE GRADES IN CARBON BLACK INDUSTRY SAFETY FIRST Sandvik s objective is zero harm to our people, the environment we work in, our customers and our suppliers. PROTECTIVE EQUIPMENT

More information

MATERIALS SCIENCE AND ENGINEERING I

MATERIALS SCIENCE AND ENGINEERING I MATERIALS SCIENCE AND ENGINEERING I LECTURE COURSE 9 ALLOY STEELS. CLASSES. INFLUENCE OF ALLOYING ELEMENTS. STRUCTURAL ALLOY STEELS. STEELS WITH SPECIAL PROPERTIES. ALLOY TOOL STEELS. ALLOY STEELS ALLOY

More information

ATI Nb. ATI Nb. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES SPECIFICATION COVERAGE CHEMICAL COMPOSITION

ATI Nb. ATI Nb. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES SPECIFICATION COVERAGE CHEMICAL COMPOSITION ATI 20-25+Nb Stainless Steel: Austenitic (UNS S35140) GENERAL PROPERTIES ATI 20-25+Nb alloy is an austenitic stainless steel intended primarily for elevated temperature service. This alloy fills a performance

More information

Contents. 3.Main Production Equipment. 2.Product Introduction. 1.Company Profile

Contents. 3.Main Production Equipment. 2.Product Introduction. 1.Company Profile Product Introduction Contents 1.Company Profile 2.Product Introduction 3.Main Production Equipment Marketing EUROPE ASIA N. AMERICA SUNE AFRICA S. AMERICA OCEANIA Hastelloy Series Hastelloy B Hastelloy

More information

Delving into Data. 718 Plus Nickel-Based Superalloy CINDAS AHAD Database

Delving into Data. 718 Plus Nickel-Based Superalloy CINDAS AHAD Database Delving into Data Here is an in-depth look at what we have to offer for one of our most popular nickel superalloys. Each of our chapters contains tables and figures in comparable detail. Please check out

More information

SANDVIK 6R44 TUBE AND PIPE, SEAMLESS

SANDVIK 6R44 TUBE AND PIPE, SEAMLESS SANDVIK 6R44 TUBE AND PIPE, SEAMLESS DATASHEET Sandvik 6R44 is an austenitic, niobium-stabilized stainless chromium-nickel steel for use at temperatures up to 850 C (1560 F). STANDARDS ASTM: TP347, TP347H

More information

Types of stainless steel

Types of stainless steel Types of stainless steel Composition (wt%) Applications Types C Ni Cr Mo Ferritic 0.06-0.2-11-30 - Household utensils; Automotive Exhaust Components Heat exchanger Austenitic

More information

Identification. Type Analysis

Identification. Type Analysis Page 1 of 12 Unit Display: English Print Now Custom 455 Stainless E-Mail Datasheet Add to My Materials UNS Number S45500 Identification Type Analysis Carbon 0.05 % Manganese 0.50 % Phosphorus 0.040 % Sulfur

More information

a Amendments for nuclear applications: Cr, 0.04 max. C, 0.10 max. Co.

a Amendments for nuclear applications: Cr, 0.04 max. C, 0.10 max. Co. www.specialmetals.com INCONEL alloy 69 (UNS N669/W. Nr. 2.4642) is a high-chromium nickel alloy having excellent resistance to many corrosive aqueous media and hightemperature atmospheres. In addition

More information

Stainless Steel (17/4PH&630) Bar

Stainless Steel (17/4PH&630) Bar SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic

More information

ATI 201 HP /ATI 201L HP

ATI 201 HP /ATI 201L HP Stainless Steel: Austenitic (UNS S20100 and S20103) GENERAL PROPERTIES and L austenitic stainless steels belong to the 200 series of Cr-Mn-Ni stainless alloys, which are similar to the 300 series of Cr-Ni

More information

ALLOYS 625 AND 725: TRENDS IN PROPERTIES AND APPLICATIONS

ALLOYS 625 AND 725: TRENDS IN PROPERTIES AND APPLICATIONS Superalloys 718, 625, 706 and Derivatives 2005 Edited by E.A. Loria TMS (The Minerals, Metals & Materials Society), 2005 ALLOYS 625 AND 725: TRENDS IN PROPERTIES AND APPLICATIONS Lewis E. Shoemaker Huntington

More information

Nickel & Stainless Steel. Product Range

Nickel & Stainless Steel. Product Range Nickel & Stainless Steel Product Range General Index ITEM BRAND SIZE Inconel 600 Inconel 601 Inconel alloy Inconel 625 Inconel 718 Monel 400 Monel alloy Monel K500 Nickel 52 Nickel alloy Nickel 200 Nickel

More information

ISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Part 1: Wrought stainless steel

ISO INTERNATIONAL STANDARD. Implants for surgery Metallic materials Part 1: Wrought stainless steel INTERNATIONAL STANDARD ISO 5832-1 Fourth edition 2007-06-15 Implants for surgery Metallic materials Part 1: Wrought stainless steel Implants chirurgicaux Matériaux métalliques Partie 1: Acier inoxydable

More information

11.3 The alloying elements in tool steels (e.g., Cr, V, W, and Mo) combine with the carbon to form very hard and wear-resistant carbide compounds.

11.3 The alloying elements in tool steels (e.g., Cr, V, W, and Mo) combine with the carbon to form very hard and wear-resistant carbide compounds. 11-2 11.2 (a) Ferrous alloys are used extensively because: (1) Iron ores exist in abundant quantities. (2) Economical extraction, refining, and fabrication techniques are available. (3) The alloys may

More information

STAINLESS STEEL DATASHEETS

STAINLESS STEEL DATASHEETS STAINLESS STEEL DATASHEETS Alloys: 304 304L 310 316 316L 316LN 316Ti 316LVM 6Mo 21-6-9 22-13-5 904L Alloys 304 / 304L Alloys 304 / 304L (UNS S30400 / S30403) Alloys 304 (S30400) and 304L (S30403) stainless

More information

Certificate of Accreditation

Certificate of Accreditation PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares

More information

Born from fire, made to endure NICKEL ALLOYS

Born from fire, made to endure NICKEL ALLOYS Born from fire, made to endure NICKEL ALLOYS Acroni is the largest slovenian steel manufacturer, which in order to produce steel recycles scrap in an electric arc furnace, casts it on continuous caster

More information

QUICK REFERENCE GUIDE THE ALLOY SPECIALISTS

QUICK REFERENCE GUIDE THE ALLOY SPECIALISTS QUICK REFERENCE GUIDE THE ALLOY SPECIALISTS CONTENTS SOLUTIONS TO MATERIALS PROBLEMS Corrosion-Resistant Alloys...4 Heat-Resistant Alloys...7 High-Performance & Special Purpose Alloys... 10 Special Metals

More information

Stainless Steel Bar

Stainless Steel Bar SPECIFICATIONS Commercial 17/4 PH EN 1.4542 Precipitation hardening stainless steels are chromium and nickel containing steels that provide an optimum combination of the properties of martensitic and austenitic

More information

Intergranular Corrosion (IGC)

Intergranular Corrosion (IGC) Intergranular Corrosion (IGC) Microstructure of metals and alloys is made up of grains (separated by grain boundaries) Intergranular corrosion is a localized attack along the grain boundaries, or immediately

More information

STANDARD STEELS STANDARD STEELS 403

STANDARD STEELS STANDARD STEELS 403 STANDARD STEELS 403 STANDARD STEELS Standard Steels Compositions, Applications, and Heat Treatments Steel is the generic term for a large family of iron carbon alloys, which are malleable, within some

More information

STAINLESS STEELS. Chromium and nickel content in the various groups of stainless steels

STAINLESS STEELS. Chromium and nickel content in the various groups of stainless steels These steels contain a high percentage of chromium and sometimes other alloys and have been designed to prevent different types of corrosion. There are two kinds of corrosion: dry corrosion (often named

More information

Metallurgy for the Non-Metallurgist

Metallurgy for the Non-Metallurgist Metallurgy for the Non-Metallurgist Metals and alloys are used in the greatest variety of applications of all engineering materials. As such it is essential for those involved in manufacturing, engineering

More information

Effect of Precipitation Hardening on Microstructural Characteristics of 15-5 Ph Steel

Effect of Precipitation Hardening on Microstructural Characteristics of 15-5 Ph Steel International Journal of Engineering Research and Development e-issn: 2278-067X, p-issn: 2278-800X, www.ijerd.com Volume 9, Issue 1 (November 2013), PP. 22-26 Effect of Precipitation Hardening on Microstructural

More information

Specification Alloyed quenched and tempered steel and. JED precipitation hardening steel 036M

Specification Alloyed quenched and tempered steel and. JED precipitation hardening steel 036M Specification 2017-05 Class: Heat-treatable steel Class No.:11 Alloyed quenched and tempered steel and JED precipitation hardening steel 036M Previous Edition Part name (for databases) 1994-03 Alloyed

More information

SANDVIK NANOFLEX STRIP STEEL

SANDVIK NANOFLEX STRIP STEEL SANDVIK NANOFLEX STRIP STEEL DATASHEET Sandvik Nanoflex is a precipitation hardening, austenitic stainless steel specifically designed for applications requiring high strength and good ductility. Mechanical

More information

Types : HYDRAULIC TUBE HORN TUBE CAPILLARY TUBE

Types : HYDRAULIC TUBE HORN TUBE CAPILLARY TUBE Inconel alloys are oxidation and corrosion resistant materials well suited for service in extreme environments. It is common in gas turbine blades, seals, and combustors, as well as turbocharger rotors

More information

GB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE

GB/T Translated English of Chinese Standard: GB/T NATIONAL STANDARD OF THE Translated English of Chinese Standard: GB/T3077-2015 www.chinesestandard.net Sales@ChineseStandard.net GB NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA ICS 77.140.60 H 40 GB/T 3077-2015 Replacing

More information

Industeel. Clad plates

Industeel. Clad plates Industeel Clad plates Our Business Industeel Leading special steels producer Industeel is a subsidiary of ArcelorMittal producing special steel hot rolled plates, forged blocks, ingots and formed pieces

More information

PART 1 MATERIALS COPYRIGHTED MATERIAL

PART 1 MATERIALS COPYRIGHTED MATERIAL PART 1 MATERIALS COPYRIGHTED MATERIAL CHAPTER 1 CARBON AND ALLOY STEELS Bruce L. Bramfitt International Steel Group, Inc. Research Laboratories Bethlehem, Pennsylvania 1 INTRODUCTION 3 2 STEEL MANUFACTURE

More information

SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components

SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components SEMASPEC Test Method for Metallurgical Analysis for Gas Distribution System Components Technology Transfer 91060574B-STD and the logo are registered service marks of, Inc. 1996, Inc. SEMASPEC Test Method

More information

Materials for Automobiles. Carburization Lec 6 22 August 2011

Materials for Automobiles. Carburization Lec 6 22 August 2011 Materials for Automobiles Carburization Lec 6 22 August 2011 Assignment 1 Suggest suitable steel for: Sewing Needle Tipper load body Hammer head State the properties expected and how the recommended steel

More information

CHROMESHIELD 22 STAINLESS STEEL

CHROMESHIELD 22 STAINLESS STEEL CHROMESHIELD 22 STAINLESS STEEL P R O D U C T D ATA B U L L E T I N Appliances Food Service Equipment Architectural Welded Components Tubing Cookware Applications Potential CHROMESHIELD 22 Stainless Steel

More information

family of stainless steels can be divided into five (5) categories:

family of stainless steels can be divided into five (5) categories: Welcome to the fifth issue of Tech Talk. This newsletter covers a range of topics on various welding products, applications, metallurgy, techniques, and economics. Previous issues are archived at www.unibraze.com.

More information

Copper Precipitation Hardened, High Strength, Weldable Steel

Copper Precipitation Hardened, High Strength, Weldable Steel Copper Precipitation Hardened, High Strength, Weldable Steel by Semyon Vaynman 1, Morris E. Fine 1, Gautam Ghosh 1, and Shrikant P. Bhat 2 "Materials for the New Millennium," Proceedings of the 4 th Materials

More information

ATI 321 /ATI 347 /ATI 348

ATI 321 /ATI 347 /ATI 348 ATI 321 /ATI 347 /ATI 348 Stainless Steel: Austenitic (UNS S32100, S34700, S34800) GENERAL INFORMATION ATI 321 (UNS S32100), ATI 347 (UNS S34700), and ATI 348 (UNS S34800) alloys are stabilized stainless

More information

MICRO-ALLOYING IMPROVES RESISTANCE TO HIGH TEMPERATURE ENVIRONMENTS

MICRO-ALLOYING IMPROVES RESISTANCE TO HIGH TEMPERATURE ENVIRONMENTS MICRO-ALLOYING IMPROVES RESISTANCE TO HIGH TEMPERATURE ENVIRONMENTS J.D. Wilson, T.J. Carney, J.C Kelly Rolled Alloys, Inc. 125 West Stems Road Temperance, MI 48182-9546 ABSTRACT Modern melting and refining

More information

Heat treatment and effects of Cr and Ni in low alloy steel

Heat treatment and effects of Cr and Ni in low alloy steel Bull. Mater. Sci., Vol. 34, No. 7, December 2011, pp. 1439 1445. Indian Academy of Sciences. Heat treatment and effects of Cr and Ni in low alloy steel MOHAMMAD ABDUR RAZZAK Materials and Metallurgical

More information

The role of alloying elements in bainitic rail steels

The role of alloying elements in bainitic rail steels The role of alloying elements in bainitic rail steels by A. Kapito*, W. Stumpf, and M.J. Papo* Synopsis The formation of bainite in steel is dependent on the size of the casting, the heat treatment, and

More information

ATI 332Mo. ATI 332Mo. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES COMPOSITION PHYSICAL PROPERTIES (UNS S35125)

ATI 332Mo. ATI 332Mo. Technical Data Sheet. Stainless Steel: Austenitic GENERAL PROPERTIES COMPOSITION PHYSICAL PROPERTIES (UNS S35125) ATI 332Mo Stainless Steel: Austenitic (UNS S35125) GENERAL PROPERTIES ATI s ATI 332Mo alloy is an austenitic stainless steel intended primarily as an economical material for automotive flexible connectors.

More information

ATI 13-8 ATI Technical Data Sheet. Precipitation Hardening Alloy INTRODUCTION FORMS AND CONDITIONS. (UNS S13800, ASTM Type XM-13)

ATI 13-8 ATI Technical Data Sheet. Precipitation Hardening Alloy INTRODUCTION FORMS AND CONDITIONS. (UNS S13800, ASTM Type XM-13) ATI 13-8 Precipitation Hardening Alloy (UNS S13800, ASTM Type XM-13) INTRODUCTION ATI 13-8 alloy (UNS S13800) is a martensitic precipitation-hardening stainless steel that has excellent strength, high

More information

SANDVIK SPRINGFLEX SF SPRING WIRE WIRE

SANDVIK SPRINGFLEX SF SPRING WIRE WIRE SANDVIK SPRINGFLEX SF SPRING WIRE WIRE DATASHEET Sandvik Springflex SF is a duplex (austenitic-ferritic) stainless steel especially designed for spring applications with extremely high fatigue requirements.

More information

View from the Penthouse

View from the Penthouse View from the Penthouse The DNFM Technical News Letter David N. French Metallurgists Ph: 502-955-9847 Fax: 502-957-5441 Web: www.davidnfrench.com Stress-corrosion-cracking (SCC) is a well-defined failure

More information

ATI 18CrCb. ATI 18CrCb. Technical Data Sheet. Stainless Steel: Ferritic GENERAL PROPERTIES STRUCTURE TYPICAL COMPOSITION (UNS S44100)

ATI 18CrCb. ATI 18CrCb. Technical Data Sheet. Stainless Steel: Ferritic GENERAL PROPERTIES STRUCTURE TYPICAL COMPOSITION (UNS S44100) ATI 18CrCb Stainless Steel: Ferritic (UNS S44100) GENERAL PROPERTIES ATI's AL 18CrCb stainless steel is a heat-resisting ferritic grade providing good oxidation and corrosion resistance for applications

More information

Standards & Specifications

Standards & Specifications Acme Alloys Products Standards & Specifications Page 1 of 12 Standards & Specifications Like any other technology, engineering and science; material science and metallurgy is an ever-widening field with

More information