MATERIAL SAFETY DATA SHEET

Size: px
Start display at page:

Download "MATERIAL SAFETY DATA SHEET"

Transcription

1 Sanodure Violet CLW Page 1 WHMIS controlled: no Section 01 - Product Information Identification of the company: Clariant (Canada) Inc Cousens Street St.Laurent, Q.C., H4S 1X3 Information of the substance/preparation: ESHA Tel (514) , Fax (514) Emergency tel. number: +1 CANUTEC (613) Trade name: Sanodure Violet CLW Material number: Chemical family: anionic azo dyestuff/copper complex Primary product use: aluminium dye Section 02 - Composition information on hazardous ingredients Hazardous ingredients: Component CAS number Concentration Copper, elemental % Hexylene glycol % Component toxicity information: Hexylene glycol ( ) Acute oral toxicity: LD50 3,700 mg/kg (rat) Section 03 - Hazards identification Health effects of exposure: Eye and skin contact may cause irritation. Inhalation of dust may irritate the respiratory tract. Copper: prolonged or repeated exposure to copper can discolor skin and hair and irritate the skin; may cause mild dermatitis, runny nose, and irritation of the mucous membranes. Repeated ingestion may damage the liver and kidneys. Repeated inhalation can cause chronic respiratory disease. Overexposure to copper salts may cause irritation to skin, eyes and upper respiratory tract. Hexylene glycol: harmful by ingestion and inhalation. May cause central nervous system effects. Irritant to skin and respiratory system. Severe irritant to eyes. May cause allergic skin reactions. The effects of long term exposure have not been determined. Listed carcinogen: IARC: No NTP: No

2 Sanodure Violet CLW Page 2 OSHA: No Other: No Section 04 - First aid measures After inhalation: Get victim to fresh air. Give artificial respiration or oxygen if breathing has stopped or is difficult. Get prompt medical attention. Do not give fluids if victim is unconscious. After contact with skin: Remove contaminated clothing and wash affected areas with soap and plenty of water for at least 15 minutes. If redness or skin irritation occurs, seek medical attention. After contact with eyes: Immediately wash the eyes with flowing water for at least 15 minutes. Insure proper irrigation by occasionally lifting upper and lower eyelids. Thereafter seek prompt medical attention. After ingestion: If ingested, do not induce vomiting. Get immediate medical assistance. Advice to doctor / Treatment: None known. Section 05 - Fire fighting measures Flashpoint: Extinguishing media: not applicable Special fire fighting procedure: Cool container and metallic parts with a water spray jet Unusual fire and explosion hazards: all Hazardous combustion products: carbon oxides copper oxides hydrogen chloride nitrogen oxides sulfur oxides Minimum ignition energy : Organic dusts have potential to be explosive with static spark or flame initiation. Maintain good housekeeping for control of dust. > 1 J Not a dust explosion hazard. Method: modified Hartmann tube Section 06 - Accidental release measures Steps to be taken in case of spill or leak: Wear prescribed protective equipment. Sweep up or shovel into disposal containers using non-sparking tools. Eliminate ignition sources. Wet down with non-reactive liquid if required to limit dusting. If melted, allow to solidify first. Clean up spill location. Must not be released into sewers, drains or wells.

3 Sanodure Violet CLW Page 3 Section 07 - Handling and storage Advice on safe handling: Keep container tightly closed. Section 08 - Exposure controls / personal protection Occupational exposure limits: Component CAS Regulatory list Type of value Value 1 Value 2 number: Copper US ACGIH 0.2 mg/m3 Values Value_Time Weighted Average Hexylene glycol US ACGIH Values Value_Ceiling 25 ppm Respiratory protection: Hand protection: Eye protection: Other protective equipment: Wear an approved dust respirator when handling product. Rubber or Plastic Wear safety glasses with side-shields. Wear clothing suitable to avoid skin contact. Section 09 - Physical and chemical properties Form: Color: Odor: ph: Solubility in water: Melting point : Boiling point : Bulk density: Granules violet not specified app. 3 (20 C, 3 g/l) app. 20 g/l (20 C) soluble not applicable not applicable ( 1,013 hpa) 800 kg/m3 Section 10 - Stability and reactivity Thermal decomposition: 230 C Method: SANDOZ long duration test open cup Heating rate: 0 K/min, Air open cup Thermal decomposition: 260 C Method: dynamic decomposition test

4 Sanodure Violet CLW Page 4 Hazardous Polymerization: Hazardous decomposition products Will not occur. Conditions to avoid: None known. When used and handled as intended, none. Section 11 - Toxicological information Acute oral toxicity: Skin irritation: Eye irritation: LD50 > 5,000 mg/kg (rat) Method: SANDOZ internal test non-irritant (rabbit) Method: 16CFR non-irritant (rabbit) Method: 16CFR Section 12 - Ecological information Biodegradation: Fish toxicity: Bacteria toxicity: app. 60 % (14 d, TOC) Method: static method LC0 400 mg/l (48 h, rainbow trout (salmo gairdneri, oncorhynchus mykiss)) IC50 > 100 mg/l (activated sludge) Method: OECD 209 * 1984 activated sludge.respir.inhib. Section 13 - Disposal considerations Waste disposal information: Dispose in accordance with local regulations at a government approved incinerator or waste management site. Section 14 - Transport information TDG IATA IMDG Section 15 - Regulatory information Registration status: yes DSL: yes NDSL: no CEPA Listed as priority substance: no Listed as toxic substance: no TSCA Status:

5 Sanodure Violet CLW Page 5 All components of this product are listed on the TSCA Inventory. FDA: Permitted for Use per Section: NONE This product is not registered with the FDA. Section 16 - Other information The information contained on this MSDS is to the best of our knowledge an accurate summary of the data available as of the date of preparation. Clariant (Canada) Inc. is not liable for the application or use of this information in situations beyond its control or outside the normal and expected use of its product. Clariant (Canada) Inc. assumes no responsibility for damage or injury from the use of the product described herein.