Standard Specifications for Tube

Transcription

1 Standard Specifications for Tube

2 CONTENTS Seamless Thin Wall Tube PG. 4 Seamless Ring Tube PG. 6 Metal Description Legend PG. 8 Mechanical Properties of Standard Alloys PG.10 2

3 Umicore s business unit Jewellery and Industrial Metals provides an unrivalled wide range of precious metals products and related services to the jewellery industry and to a variety of industrial applications. Its North American production site is both ISO9001 and ISO14001 certified. The Standard Specifications series define the standard specifications for custom orders. They correspond to the needs of the majority of the precious metals industry in North America and illustrate most of Umicore s production capabilities. Should you, however, have a request that seems to fall outside what is published here, then please don t hesitate to contact us for further assistance. Umicore updates its Standard Specifications regularly based on customer feedback, market trends and technological developments. For each product the Standard Specifications show: Product name and description Characteristics needed to fully define the product and a drawing illustrating the definition of those, where appropriate Available materials for these products Standard production capabilities and tolerances Temper Standard packaging In order to speed up the processing of product inquiries and orders we encourage you to use the terminology used in the Standard Specifications and to clearly indicate any requests that deviate from these Standard Specifications, such as tighter specifications. Throughout the Standard Specification series all dimensions are provided in mm and temperatures in C. Conversions to inches, feet and F are for reference only. 3

4 Seamless Thin Wall Tube Product characteristics: Material Outside diameter ( OD ) Sidewall 1 ( SW ) Length 2 Special shape requirements Flatness Tolerances (if different from the Standard Specifications ) Vickers hardness or temper (see charts in appendix) Surface finish and quality Packaging Available materials: From stock: 10Y, 14Y, 14D, 18Y, 18D, 95D, SSW, ANT Made to order: 14R, 95R, FIS or any other customer specified alloy Production capabilities: SIDEWALL (MM) SIDEWALL (INCHES) MAXIMUM OD (MM) MAXIMUM OD (INCHES) MINIMUM OD (MM) MINIMUM OD (INCHES) Other dimensions and tolerances may be available on request. For palladium white gold: SIDEWALL (MM) SIDEWALL (INCHES) MAXIMUM OD (MM) MAXIMUM OD (INCHES) MINIMUM OD (MM) MINIMUM OD (INCHES) Tolerances on dimensions: Sidewall: +/ mm ( ) OD: +/ mm ( ) 1 Sidewall is also referred to as wall thickness. Instead of the sidewall also the inner diameter ( ID ) can be specified. 2 Instead of the length the mass can be used to define the volume ordered. 4

5 Length: Maximum mm/39.0 in straight lengths. Longer tubes are on 200 mm/8 coils. The maximum weight per coil is approximately 200 g to 300 g, depending on the material and dimensions ordered. Flatness: mm/0.25 over 610 mm/2 feet for straight lengths. Special shapes: Square shape tubes are available on request. Temper: Standard temper is soft. Other tempers are available on request. Surface: Uniform in appearance, of typical colour for the temper and alloy ordered, and free of orange peel, foreign inclusions, oxide or tarnish, scratches greater than 0.02 mm/ and blisters. Items ordered at soft temper may not appear shiny when first received. Once polished or drawn the surface will shine up. Packaging: Unless otherwise specified a 200 mm/8 coil is shipped. Straight lengths are shipped in a bag or tube (for lengths over c. 300 mm/12 ). 5

6 Seamless Ring Tube Product characteristics: Material Outside diameter ( OD ) Inside diameter ( ID ) or finger size Sidewall 3 Length 4 Special shape requirements Flatness Tolerances (if different from the Standard Specifications ) Vickers hardness or temper (see charts in appendix) Surface finish and quality Packaging Available materials: From stock: 10Y, 10W, 14Y, 14W, 14R, 18Y, 18W, 18D, SCU, 95D, 95H, 95R, ANT Made to order: 19Y, 19D, 22Y, SSW or any other customer specified alloy. For Orca bond gold with silver bimetal ring tube, please refer to the technical data sheet. Standard inside diameters or finger sizes: FINGER SIZE ID (MM) ID (INCHES) Other dimensions and tolerances may be available on request. 3 The OD equals the ID plus two times the sidewall. The sidewall can also be referred to as wall thickness. 4 Instead of the length the mass can be used to define the volume ordered. 6

7 Available standard sidewall dimensions: STANDARD AVAILABLE MATERIAL SIDEWALL DIMENSIONS YELLOW GOLD ALLOYS WHITE GOLD ALLOYS PLATINUM AND PALLADIUM ALLOYS SILVER ALLOYS (INCHES) (MM) FINGER SIZE BELOW 12 FINGER SIZE 12 FINGER SIZE BELOW 12 FINGER SIZE 12 FINGER SIZE BELOW 12 FINGER SIZE FINGER SIZE BELOW Other dimensions and tolerances may be available on request. FINGER SIZE 12 Tolerances on dimensions: OD: +/ mm (0.005 ) ID: +/ mm (0.005 ) Sidewall: +/ mm (0.005 ) Length: Maximum length: Platinum and palladium products: 1000 mm (40 ) Gold and silver products: 1500 mm (60 ) Cut tube (blanks) is available on request. Flatness: 0.38 mm (0.015 ) for lengths up to 600 mm (24 ). Temper: Standard temper is soft. Other tempers are available on request. Surface: Uniform in appearance, of typical colour for the temper and alloy ordered, and free of orange peel, foreign inclusions, oxide or tarnish, scratches greater than 0.02 mm/ and blisters. Items ordered at soft temper may not appear shiny when first received. Once polished or drawn the surface will shine up. Packaging: Shipped in a plastic tube. 7

8 METAL DESCRIPTION LEGEND Gold CODE 10Y 10W 10G 10R 14Y 14W 14D 14G 14R 18Y 18W 18D 18G 18R 19Y 19D 22Y DESCRIPTION 10 karat yellow gold 10 karat white gold 10 karat green gold 10 karat red gold 14 karat yellow gold 14 karat white gold 14 karat palladium white gold 14 karat green gold 14 karat red gold 18 karat yellow gold 18 karat white gold 18 karat palladium white gold 18 karat green gold 18 karat red gold 19 karat yellow gold 19 karat palladium white gold 22 karat yellow gold KARAT MINIMUM GOLD CONTENT COMMENTS % High karat alloys available on request % High karat alloys available on request % High karat alloys available on request % High karat alloys available on request % High karat alloys available on request % High karat alloys available on request % 99.95% and 99.99% available on request 8

9 Silver CODE DESCRIPTION MINIMUM SILVER CONTENT COMMENTS SSW Sterling silver 92.50% 93.5% silver available on request FIS Fine silver 99.90% 99.95% and 99.99% available on request COS Coin silver 89.93% SOF Solder flush 92.52% SCU Silver Copper 93.50% ANT Arctic Fox anti-tarnish silver 92.70% Platinum CODE MINIMUM PLATINUM CONTENT DESCRIPTION 90W 90.00% 90% Platinum 10% Iridium 95W 95.00% 95% Platinum 5% Iridium 95H 95.20% 95% Platinum Heat Treatable 95R 95.20% 95% Platinum 5% Ruthenium FPT 99.90% 99.9% Platinum (99.99% available on request) Palladium CODE MINIMUM PALLADIUM CONTENT DESCRIPTION FPD 99.90% 99.9% Palladium 95D 95.00% 95% Palladium 5% Silver and Gallium Impurity levels for all jewellery products Nickel Lead Cadmium 90 ppm (for alloys without nickel as alloying element) 40 ppm 40 ppm 9

10 MECHANICAL PROPERTIES OF STANDARD ALLOYS 10W Soft 0.0% 177 ± 10 ¼ Hard 20.70% 240 ± 10 ½ Hard 37.10% 275 ± 10 ¾ Hard 50.10% 286 ± 10 Hard 60.50% 291 ± 10 Soft 0.0% 110 ± 10 ¼ Hard 20.70% 166 ± 10 ½ Hard 37.10% 189 ± 10 ¾ Hard 50.10% 201 ± 10 Hard 60.50% 220 ± 10 10Y 14W Soft 0.0% 188 ± 10 ¼ Hard 20.70% 243 ± 10 ½ Hard 37.10% 272 ± 10 ¾ Hard 50.10% 290 ± 10 Hard 60.50% 294 ± 10 10

11 Soft 0.0% 137 ± 10 ¼ Hard 20.70% 187 ± 10 ½ Hard 37.10% 213 ± 10 ¾ Hard 50.10% 229 ± 10 Hard 60.50% 242 ± 10 14Y 14D Soft 0.0% 190 ± 10 ¼ Hard 20.70% 237 ± 10 ½ Hard 37.10% 259 ± 10 ¾ Hard 50.10% 275 ± 10 Hard 60.50% 283 ± 10 Soft 0.0% 124 ± 10 ¼ Hard 20.70% 184 ± 10 ½ Hard 37.10% 208 ± 10 ¾ Hard 50.10% 235 ± 10 Hard 60.50% 245 ± 10 14R 11

12 18W Soft 0.0% 237 ± 10 ¼ Hard 20.70% 286 ± 10 ½ Hard 37.10% 296 ± 10 ¾ Hard 50.10% 311 ± 10 Hard 60.50% 328 ± 10 Soft 0.0% 160 ± 10 ¼ Hard 20.70% 188 ± 10 ½ Hard 37.10% 205 ± 10 ¾ Hard 50.10% 225 ± 10 Hard 60.50% 232 ± 10 18Y 18D Soft 0.0% 185 ± 10 ¼ Hard 20.70% 235 ± 10 ½ Hard 37.10% 253 ± 10 ¾ Hard 50.10% 264 ± 10 Hard 60.50% 272 ± 10 12

13 18G Soft 0.0% 98.5 ± 10 ¼ Hard 20.70% 150 ± 10 ½ Hard 37.10% 158 ± 10 ¾ Hard 50.10% 166 ± 10 Hard 60.50% 175 ± 10 Soft 0.0% 160 ± 10 ¼ Hard 20.70% 222 ± 10 ½ Hard 37.10% 237 ± 10 ¾ Hard 50.10% 242 ± 10 Hard 60.50% 253 ± 10 18R 19D Soft 0.0% 250 ± 10 ¼ Hard 20.70% 276 ± 10 ½ Hard 37.10% 289 ± 10 ¾ Hard 50.10% 324 ± 10 Hard 60.50% 331 ± 10 13

14 Soft 0.0% 127 ± 10 ¼ Hard 20.70% 140 ± 10 ½ Hard 37.10% 168 ± 10 ¾ Hard 50.10% 196 ± 10 Hard 60.50% 208 ± 10 19Y Soft 0.0% 75 ± 10 ¼ Hard 20.70% 105 ± 10 ½ Hard 37.10% 114 ± 10 ¾ Hard 50.10% 119 ± 10 Hard 60.50% 126 ± 10 22Y Soft 0.0% 33 ± 10 ¼ Hard 20.70% 59 ± 10 ½ Hard 37.10% 69 ± 10 ¾ Hard 50.10% 80 ± 10 Hard 60.50% 83 ± 10 FIS 14

15 SSW Soft 0.0% 80 ± 10 ¼ Hard 20.70% 100 ± 10 ½ Hard 37.10% 108 ± 10 ¾ Hard 50.10% 116 ± 10 Hard 60.50% 124 ± 10 ANT Soft 0.0% 82 ± 10 ¼ Hard 20.70% 102 ± 10 ½ Hard 37.10% 110 ± 10 ¾ Hard 50.10% 118 ± 10 Hard 60.50% 126 ± 10 SCU Soft 0.0% 80 ± 10 ¼ Hard 20.70% 100 ± 10 ½ Hard 37.10% 108 ± 10 ¾ Hard 50.10% 116 ± 10 Hard 60.50% 124 ± 10 15

16 Soft 0.0% 49 ± 10 ¼ Hard 20.70% 69 ± 10 ½ Hard 37.10% 77 ± 10 ¾ Hard 50.10% 82 ± 10 Hard 60.50% 88 ± 10 FPT 95H Soft 0.0% 230 ± 10 ¼ Hard 20.70% 282 ± 10 ½ Hard 37.10% 312 ± 10 ¾ Hard 50.10% 316 ± 10 Hard 60.50% 328 ± 10 95R Soft 0.0% 145 ± 10 ¼ Hard 20.70% 180 ± 10 ½ Hard 37.10% 189 ± 10 ¾ Hard 50.10% 197 ± 10 Hard 60.50% 205 ± 10 16

17 95D Soft 0.0% 115 ± 10 ¼ Hard 20.70% 165 ± 10 ½ Hard 37.10% 169 ± 10 ¾ Hard 50.10% 179 ± 10 Hard 60.50% 188 ± 10 The information and data provided are based on results from internal procedures. Duplication of exact material property values at another site cannot be warranted as there may be differences in the equipment and procedures used. The end user is responsible for determining product suitability for the intended application. Refer to the Material Safety Data Sheet (MSDS) before use. 17

18 Umicore Precious Metals USA Inc. 527 Pleasant Street, Building 11, Attleboro, MA United States PHONE : TOLL FREE : FAX : TOLL FREE FAX : usa-salesweb@am.umicore.com Umicore Precious Metals Canada Inc. Traditional name: Imperial Smelting and Refining Company of Canada 451 Denison Street Markham, ON L3R 1B7 Canada PHONE : TOLL FREE : FAX : TOLL FREE FAX : canada-salesweb@am.umicore.com 18