CHEMLAND Products. - Dispersions -

Transcription

1 CHEMLAND Products. - Dispersions -

2 Introduction of UV Cutting TiO2 & ZnO Dispersions

3 extinction coefficient L/g.cm 1. Characteristic of Inorganic UV filters UV absorption development on milling premix 2 passes 4 passes 6 passes 8 passes 10 passes wavelength nm UV-Cut Effect of TiO 2 Powder Size distribution UV-Cut Effect of TiO 2 Dispersion Pass Number Company Logo Material Research Lab.

4 2. UV Protection mechanism by Organic & Inroganic UV filters UV-Cut Effect of Inorganic TiO 2

5 3. The UV-CUT benefit PRODUCTS of Inroganic UV filters

6 4. The type of TiO2 Structure Name Anatase Rutile Brookite Density Refractive Coefficient Hardness Boiling Point Structure Model Rutile Transition 1, Company Logo Material Research Lab.

7 5. Photo Catalyst of TiO2 Company Logo Material Research Lab.

8 6. Comparing different type of TiO2 Item Name M-100T UV-CL-1 UV-CL-2 M-6 T-51 Crystal Rutile Rutile Rutile Rutile Rutile TiO 2 Content (82 %) (84.8) (79.2) Al 2 O 3 content 1 11 (5.7 %) (6.3) (8.2) Stearic Acid Content 3 13 (6.0 %) (6.4) (9.8) Size(nm) (16nm) Absorbtion(%) (29.1) (32.4) Company Logo Material Research Lab.

9 6. Comparing different type of TiO2 M-100T M-6 UV-CL-1 UV-CL Company Logo Material Research Lab.

10 6. Comparing different type of TiO2 UV-CL-2 T-51 Material Research Lab.

11 7. The benefit of Chemland dispersions Certification of TiO 2 Dispersion particle by Microscope Dispersion by Homo Mixer Dispersion by Chemland Material Research Lab.

12 8. Enhanced efficacy of UV cutting effect.

13 9. Production flow chart of Dispersions. Emollient, Agent Mixing Emollient : Cyclopentasiloxane Dispersion Agent : Dimethicone copolyol TiO 2 Mixing Additive Mixing Homo Dispersion TiO 2 : UV-CL-1 Additive Mixing : Hexyl Laurate Bead Mill dispersion Inspection and Packing Manufacture Flow Chart of UV-Cut Dispersion Material Research Lab.

14 9. Specification of Dispersions. Specification of Product Tinoply-SE50 Appearance White Dispersion -. Stability of Dispersion To see the stability of dispersion system, tested 5times with Cycling test method. But, there were no Precipitation and no segregation. Composition Titanium Dioxide 40 ± 1.0% Cyclopentasiloxane 31.7±0.79% Hexyl Laurate 10±0.25% Methicone 5.5±0.14% Alumina 4.5±0.11% PEG-10 Dimethicone 8.3±0.21% -. Contents of Micro TiO2 Tinoply-SE50 is a high concentration dispersion system containing over 40% of TiO2 powder while the regular TiO2 dispersion content 30% or less. -. Capacity of UV cut Analyzed by UV Spectrometer, Tinoply-SE50 cut over 95% of UV-B ray. -. SPF Value Heavy Metal Lead (Pb) Arsenic (As) 20 ppm Max. 5 ppm Max. Get the result over 50 In Vitro tested with SPF290. Tinoply-SE50 10%, Organic screen agent 4.3%, ZnO 1% Material Research Lab.

15 10. Compare the white residue UV-CUT PRODUCTS Competitor Chemland

16 11. Benefit of evenly dispersed TiO2 TiO2 Powder Formula (4%TiO2, SPF 37.52) TiO2 Dispersion Formula (10% Dispersion, SPF 50.09)

17 12. Chemland UV dispersions UV-CUT PRODUCTS NAME INCI NAME PROSPERTIES Tinoply SE50T Titanium Dioxide - Regular dispersion of TiO2 and well compatible with oil and silicon Alumina -Great transparency Stearic acid - Good UV cut effect about UV B ( nm) Cyclopentasiloxane -Gentle and silky skin feel Hexyl Lautate -Recommended Oil base product like W/S. PEG-10 Dimethicone (Ex. Sun cream, BB cream, Sun lotion etc.) Tinoply SE50 Tinoply S50 Tinoply E50 Titanium Dioxide Alumina Methicone Cyclopentasiloxane Hexyl Lautate PEG-10 Dimethicone Titanium Dioxide Alumina Stearic acid Cyclopentasiloxane PEG-10 Dimethicone Titanium Dioxide Alumina Stearic acid C12-15 Alkyl Benzoate Polyhydroxystearic acid - Regular dispersion of TiO2 and well compatible with oil and silicon -Great transparency - Good UV cut effect about UV B ( nm) -Gentle and silky skin feel with low viscosity. -Recommended Oil base product like W/S. (Ex. Sun cream, BB cream, Sun lotion etc.) - Regular dispersion of TiO2 and well compatible with oil and silicon -Great transparency - Good UV cut effect about UV B ( nm) -Easy to use because of its low viscosity. -Recommended Oil base product like W/S. (Ex. Sun cream, BB cream, Sun lotion etc.) - Regular dispersion of TiO2 and well compatible with oil and silicon -Great transparency and long lasting - Good UV cut effect about UV B ( nm) -light skin feel. -Recommended Oil base product like W/O.

18 12. Chemland UV dispersions NAME INCI NAME PROSPERTIES Tinoply A30 Water Titanium Dioxide Alumina Sodium Polyacrylate Silica - Regular dispersion of TiO2 in water base. -Good stability - Easy to use because of its low viscosity. - Good UV cut effect about UV B ( nm) - Recommended all of O/W type products Tinoply A50B Water Titanium Dioxide Silica Glycerin 1,3 Butylene Glycol - low viscosity with high TiO2 (below 1,000 CPS) -Good compatible and transparency. -Good stability - Good UV cut effect about UV B ( nm) - Recommended all of O/W type products

19 12. Chemland UV dispersions NAME INCI NAME PROSPERTIES Zanoply-S50 Zinc Oxide Cyclopentasiloxane PEG-10 Dimethicone Triethoxycaprylylsilane - Regular dispersion of ZnO and well compat ible with oil and silicon -Great transparency - Good UV cut effect over UVA and UVB -Gentle and silky skin feel -Recommended Oil base product like W/S. Zanoply-E50 Zanoply-A50W Zinc Oxide C12-15 Alkyl Benzoate Triethoxycaprylylsilane Polyhydroxystearic Acid Zinc Oxide Water PEG-26-PPG-30 Phosphate 1,2-Hexanediol Caprylyl Glycol Tropolone Simethicone (Ex. Sun cream, BB cream, Sun lotion etc.) - Regular dispersion of ZnO and well compat ible with oil and silicon -Great transparency - Good UV cut effect over UVA and UVB -Gentle and silky skin feel -Recommended Oil base product like W/S. (Ex. Sun cream, BB cream, Sun lotion etc.) - Regular dispersion of ZnO in water base. - Good stability - Easy to use because of its low viscosity. - Good UV cut effect about UVA and UVB - Recommended all of O/W type products

20 13. UV-CUT SPF performance PRODUCTS of dispersions Concentration (%) Without organic UV filter SPF With Organic UV Filter (dosage : 4.5%) 10% % % SPF values of Suncream contains Tinoply-SE50

21 SPF Value 13. UV-CUT SPF performance PRODUCTS of dispersions y = x R 2 = Conc. Of Dispersion 1% of Tinoply-SE50 = 1.3 Unit / SPF Without any organic UV filter

22 14. Chemland product in the market Key ingredients: -Tinoply-SE50