Aluminium Alloy ALUMEC 89 Hot Rolled PLATE

Transcription

1 SPECIFICATIONS MECHANICAL PROPERTIES Commercial 7000 Series Property Value Hardness Brinell HB Alumec 89 is a high strength aluminium alloy supplied in the form of hot rolled, heat treated plate. It undergoes a special cold stretching operation for maximum stress relieving. Thanks to its high strength and good stability, Alumec 89 has become widely used in the tooling industry. Delivery condition: heat treated to Brinell. Alumec 89 has the following characteristics which make it suitable for many types of tools especially plastics moulds: Excellent machinability - High cutting speeds, reduced machining time, lower tooling costs, quicker deliveries. Low weight - The low weight, which is approximately 1/3 of the weight of steel, allows easier and more convenient tool handling. Low inertia makes it possible to speed up closing and opening of moulds. High thermal conductivity - Cycle times are reduced and less complicated cooling systems may be used. Good stability - A special stress relieving operation guarantees minimal deformation during and after machining. Good corrosion resistance - Good resistance against all commonly used plastics materials. Suitable for surface treatments - Alumec 89 can be hard anodized, hard chromium or nickel plated for increased hardness, wear resistance and corrosion resistance. Full manufacturer's information and MSDS Datasheet are attached. TEMPER TYPES Heat treated to Brinell. SUPPLIED FORMS Plate GENERIC PHYSICAL PROPERTIES CONTACT Address: Unit 29 Beeches Industrial Estate Lavenham Road Yate, Bristol BS37 5QX Tel: Fax: sales@durbinmetals.co.uk Web: REVISION HISTORY Datasheet Updated 18 December 2017 DISCLAIMER This Data is indicative only and as such is not to be relied upon in place of the full specification. In particular, mechanical property requirements vary widely with temper, product and product dimensions. All information is based on our present knowledge and is given in good faith. No liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon. Please note that the 'Datasheet Update' date shown above is no guarantee of accuracy or whether the datasheet is up to date. The information provided in this datasheet has been drawn from various recognised sources, including EN Standards, recognised industry references (printed & online) and manufacturers data. No guarantee is given that the information is from the latest issue of those sources or about the accuracy of those sources. Property Density Thermal Conductivity Value 2.83 g/cm³ 165 W/m.K Material supplied by the Company may vary significantly from this data, but will conform to all relevant and applicable standards. As the products detailed may be used for a wide variety of purposes and as the Company has no control over their use; the Company specifically excludes all conditions or warranties expressed or implied by statute or otherwise as to dimensions, properties and/or fitness for any particular purpose, whether expressed or implied. Advice given by the Company to any third party is given for that party s assistance only and without liability on the part of the Company. All transactions are subject to the Company s current Conditions of Sale. The extent of the Company s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request. [1 OF 21] CONTINUED

2 [2 OF 21] CONTINUED

3 [3 OF 21] CONTINUED

4 [4 OF 21] CONTINUED

5 [5 OF 21] CONTINUED

6 [6 OF 21] CONTINUED

7 [7 OF 21] CONTINUED

8 [8 OF 21] CONTINUED

9 [9 OF 21] CONTINUED

10 [10 OF 21] CONTINUED

11 [11 OF 21] CONTINUED

12 [12 OF 21] CONTINUED

13 [13 OF 21] CONTINUED

14 [14 OF 21] CONTINUED

15 [15 OF 21] CONTINUED

16 [16 OF 21] CONTINUED

17 [17 OF 21] CONTINUED

18 [18 OF 21] CONTINUED

19 [19 OF 21] CONTINUED

20 [20 OF 21] CONTINUED

21 [21 OF 21]