Transcription

1

2 Company Profile Gilson Industries is a reputed name in the field of conveyor belt & transmission rubber belts and has been working with a young & dynamic Technical Team under the able guidance of its founder who has got experience of 3 decades of rubber belts. For the promotion of productivity there is a growing need for mechanical handling of bulk material to considerable distances even where significant differences in height and in most cases CONVEYOR BELTS are found to be the right answer. The objective of the company is to develop, manufacture & market conveyor belts according to the specific requirements of an esteemed customer being in with exactly of reliability built into item and in the modern plant of GI conveyor belts, almost all types are manufactured confirming to IS: 1891/International standard under strict supervision of engineers and technologist who have rich experience in this field. GI conveyor belts are standard quality products and have been accepted extensively by innumerable projects and industries throughout India. We have always believed that our customer is our teacher who tells us about our shortcomings & guide us for the future. This is the only factor by which a company grew from strength to strength and rose to its leading position today.

3 Rubber Conveyor Belts The rubber cover should be selected by taking into account the type of material to be handled and the operating condition of the belt. Conveyor belting is available in the following grades and ranging from 150 mm to 1800 mm with Moulded edge ME construction for Cotton belts and Cut edge construction CE for Nylon & EP belts in open or endless lengths. General Purpose Conveyor Belts Grade M24 High tensile strength, superior in abrasion and cut resistance. Transporting highly abrasive materials. Conforming to IS:1891 (Part- 1) BS:490 (Part-1), DIN 22102, IPSS Recommended for Limestone, metallic ores, granite, Quartz, sand, BF clinker and slag, stone chips slate, coke, Sinter gravel etc. Reinforcement Material NN, EP. Grade N17 Used for moderately abrasive and non abrasive materials. Conforming to IS:1891 (Part-1) BS:490 (Part-1), DIN 22102, IPSS Recommended for Rubble, sand (sharp), cement (ground), clay, slacked lime, charcoal, super phosphate (lump and powder), coal, ashes, soda earth, sand (smooth), pulp (dry) etc. Reinforcement Material NN, EP. Heat Resistant Conveyor Belts Grade HR Very good for general hot and moderately abrasive materials. Heat and abrasion resistant lump 125 o C (max), fines 100 o C (max). Conforming to IS:1891 (Part-2). Reinforcement Material NN, EP. Super Heat Resistant Conveyor Belts Grade SHR Best for general hot materials and services such as steel clinker, hot sintered ores, steel pallets and others. Heat and abrasion resistant lump 150 o C (max), fines 125 o C (max). Conforming to IS:1891 (Part- 2). Reinforcement Material NN, EP. Ultra Heat Resistant Conveyor Belts Grade UHR Best for extremely hot, abrasive and ambient temperature materials. Conveyed towards Sinter Plant / Furnace / Smelter Plants, Handling Lead, Zinc, Steel & Alloys Rolling Plants, Mining & Plants Handling Copper, Aluminum, Brass and Iron Ores, Mineral Mining & Plants Handling Bauxite, Manganese, Graphite, Coal, Lignite, etc. Reinforcement Material NN, EP.

4 Rubber Conveyor Belts Fire Resistant Conveyor Belts Grade FR Recommended for Coal, coke and other fire prone materials, areas prone to fire hazards. Conforming to IS:1891 (Part-5), CAN/CSA- M422-M87, DIN:22103, JISK 6324, AS Reinforcement Material NN, EP. Grade FR-79 Recommended for Coal, coke and other fire prone materials. Extra high prone to fire hazards. Conforming to IS:1891 (Part-5), CAN/CSA- M422-M87, DIN:22103, JISK 6324, AS Reinforcement Material NN, EP. Oil Resistant Conveyor Belts Grade OR Recommended for carrying parts and components coated with machine oil & other oily materials. Conforming as per International Standards. Reinforcement Material NN, EP. Rough Top Conveyor Belts Grade RT These belts are specially designed with a Rough Top / Pimpled or Ribbed / Cleated carrying surface to prevent slippage. Ideally suited to carry packaged materials on gradients of more than 20º. Low friction co-efficient with bare back bottom. Two or three plies of synthetic fabrics provide high strength & flexibility. Food Grade Conveyor Belts (Hygienic) Food Grade These belts with white rubber covers do not impart odour and do not stain the materials to be conveyed and thus are particularly suitable for food processing and pharmaceuticals industries. These belts are manufactured with FDA approved polymers and are available in high abrasion resistant / antistatic / oil resistant cover grades. Conforming as per International Standards. The Essential Characteristics of GI Conveyor Belts are: - High tensile resistance with low elongation. Good troughing and impact resistance. High flexibility of the carcass fabric to prevent bucking while wrapping on pulleys. Available up to 1800 mm width and any number of plies. Good interface adhesion of components for better flex life. Better load carrying over long haulage. Available in moulded rubber or tough slit edge finish. Resistance to environmental operating conditions. Resistance to heat and to high environmental temperatures. Resistance to chemical products such as acid, oxidizing agents even at significant concentrations. Good surface electrical conductivity, good resistance to fire and flame propagations.

5 Flat Transmission Rubber Beltings The Transmission Belts are manufactured from the best raw-materials duly tested in our Modern Laboratory. These belts are fabricated with multiple plies of specially woven fabrics with sufficient tensile strength both in wrap & weft directions. The cotton ducks (fabrics) are completely impregnated with specially formulated rubber compounds to get the best ply adhesion & excellent flex life in actual; service. The edges of belts are sealed with special binding solution to prevent ingress of moisture and fraying of the edges. Samples from finished belts are tested for quality control before being shipped. The belts are made in a wide range viz. type of fabrics, number of plies and widths to meet customer s needs and service requirements. Fabric Types & General Specifications: - Transmission Belting Products Spectrum 1 Duck Type (Fabric) 34 Oz. 32 Oz. 28 Oz. 2 Nominal Weight: gm/sq. mtr Tensile Strength (Fabric) a) Wrap-kg/mm/width b) Weft-kg/mm/width Tensile Strength of finished belt per ply kgf/25mm a) Warp b) Weft Tensile Strength per ply of finished belting a) Wrap N/mm width b) Weft N/mm width Ply Adhesion kgf/2.5cm wide strip 7 Power rating KW/cm/ply at belt speed of 5 Mtr./sec. for pulley dia of 250mm & 180 arc of contact Range of Transmission Beltings: - a) Number Of Plies : 2 To 8 b) Width : 25mm to 250 mm

6 Flat Transmission Rubber Beltings Thickness of Transmission Beltings: - Ply Construction Nominal Belt Thickness Tolerance 3 Ply 3.9 MM ± 0.5 MM 4 Ply 5.1 MM ± 0.7 MM 5 Ply 6.4 MM ± 0.8 MM 6 Ply 7.7 MM ± 1.0 MM 8 Ply 10.4 MM ± 1.1 MM No. of Plies Maximum Belt Speed (Meters Per Second) Pulley Diameters: - Load transmission capacity of belt is directly proportional to its speed. Large diameter pulleys with increased surface speed and consequently high load capacity (of the belts), gives a greater safety to the outer plies of the belts from the effect of excessive stress and also help to regulate the load throughout the cross section of the belt. Width Of Pulley Belt Width in MM Pulley Width in MM Up to 125 MM Belt Width + 13 MM 125 MM to 250 MM Belt Width + 25 MM Installation / Inspection & Care of Transmission Belts: - 1. For getting correct initial tension the length of the belt is cut shorter than the actual steel tape measurement around the pulleys on the following basis: a) Belts upto 3 plies - 1.5% or 15 MM / Mtr. b) Belts with 4. 5 & 6 plies - 1.0% or 10 MM / Mtr. c) Belts upto 7 plies - 0.5% or 5 MM / Mtr. 2. Both ends of the belts should be square cut at the right angles to the edges and should not have ragged cotton ends. 3. Let the belt run for few minutes and read just the tension, if necessary.

7 Quality Policy Gilson Industries is firmly committed to continually enhance total customer satisfaction by consistent provision of superior products, supported with technical service worldwide, through constant innovation in technology. Quality Objectives: - 1. Satisfy our customer s needs and expectations. 2. Make commitments we fully understand and believe we can meet. 3. Meet all commitments to customers on time. 4. Verify that our products and services meet agreed requirements. 5. Monitor, benchmark and continuously improve our business, products and services, organization and employees' performance.

8 Contact Us Gilson Industries S-205, Industrial Area, Jalandhar City , State Punjab, INDIA. Contact Persons: Mr. M.S. Gill: Mr. H.S. Gill: Phone: Fax: