Rev. Jan 2018 valid until next revision

Transcription

1 AUTOMOTIVE

2 Disclaimer: - The applications specified for reference only. - It is customer s responsibilities to inspect and test the product for suitability of the customer s own use and purpose. The customer is responsible for appropriate, safe, legal use, processing and handling of the product. - To the best of our knowledge, the information contained herein is accurate and reliable as of the date of publication. We however do not assume any liability whatsoever for the accuracy and completeness of the information contained herein. - We make no warranties which extend beyond the description herein. Nothing herein shall constitute any implied warranty of merchantability or fitness for a particular purpose. - No liability can be accepted in respect for the use of the product in conjunction with other materials. The information contained herein relates exclusively to the product when it is not used in conjunction with any third party s materials. Rev. Jan 2018 valid until next revision

3 INTRODUCTION SCG Chemicals is one of the largest integrated petrochemical companies in Asia and a key industry leader. We manufacture and supply a full range of petrochemical products ranging from upstream monomers to downstream polymer including PE, PP, PVC, PS and MMA. To better serve customers requirements, SCG Chemicals assign prime importance to development of new technology and innovation for the creation of high value-added products and services (HVA). Widely recognized for product quality as well as for excellent management and world-class operation efficiency, SCG Chemicals has joint ventured with a number of the world s leading chemical companies, including the DOW Chemical Company, Mitsui Chemicals and Mitsubishi Rayon. Our Production Capacity (As of 2018) Total Capacity : 2,878 KTA (PE / PP / PVC) HDPE 920 LDPE 152 LLDPE 120 PP 720 Polyolefin Total : 1,912 (KTA) PVC Total : 966 (KTA) PVC Resin 850 PVC Compound 80 PVC Paste Resin 36 01

4 Polypropylene Resin EL-Pro is a trademark of polypropylene resin, produced by technology of Mitsui Chemicals, Inc. of Japan, which has been well recognized and licensed to many petrochemical companies worldwide since With the technology and engineering process, it allows us to provide a diverse range of products to meet the different applications. For automotive part products from car roof to axle, and from interior to exterior that require complicated work, aesthetic beauty, strength, durability, and weathering. We deliver a complete range of polypropylene resin that allow customers to make their automotive design become reality. 02

5 General Polypropylene Resin Our EL-Pro TM general polypropylene resin is the main ingredient for automotive compound formulation with various choices of PP Block Copolymer, PP Homopolymer, and PP Random Polymer resin that suits to many automotive parts including interior, exterior and under bonnet.

6 General Polypropylene PP Block Copolymer Resin Grade Melt Flow Rate at 230 C, 2.16 kg [g/10 min] ASTM D1238 P440J P441JU P640J P642J P667J 10.0 Tensile Strength at Yield ASTM D Flexural Modulus ASTM D790 12,500 12,500 12,000 14,000 12,500 Notched Izod Impact at 23 C [J/m] ASTM D NB Heat Deflection Temperature at 0.45 MPa [ C] ASTM D Key Characteristic - Excellent impact strength - Suitable for small to medium parts - Excellent impact strength, contains UV stabilizer and anti-static agent, suitable for small to medium parts - Good flowability - High impact strength - Good flowability - Excellent stiffness - High impact strength - Mechanical property balance - Contains UV stabilizer and anti-static agent - Excellent impact strength - High Stiffness - High productivity Recommended Application - High impact and durable automotive, motorcycle - Industrial container such as paint pail - High impact and durable automotive, motorcycle, outdoor parts that require long service life - High impact automotive and motorcycle parts - Automotive and motorcycle parts - Automotive parts (Bumper) - Industrial packaging - Container and furniture 04

7 General Polypropylene PP Block Copolymer Resin Grade Melt Flow Rate at 230 C, 2.16 kg [g/10 min] ASTM D1238 P740J P744J P840J P841J P842J 40.0 Tensile Strength at Yield ASTM D Flexural Modulus ASTM D790 12,500 14,500 12,500 12,000 14,500 Notched Izod Impact at 23 C [J/m] ASTM D Heat Deflection Temperature at 0.45 MPa [ C] ASTM D Key Characteristic - Good flowability - Good impact strength - Suitable for medium parts - High processability - Good impact strength - Excellent flowability - Excellent processability - Suitable for complex and large parts - Excellent flowability - Excellent processability - Suitable for complex and large parts, contains UV stabilizer and anti-static agent - Excellent flowability - Excellent processability - Suitable for complex and large parts Recommended Application - Automotive and motorcycle parts that require good flowability such as automotive trim, complex parts - Automotive and motorcycle parts that require good processability such as automotive trim, complex parts - Automotive and motorcycle parts that require excellent flowability - Automotive and motorcycle parts that require long service life - Automotive and motorcycle parts that require excellent flowability 05

8 General Polypropylene PP Homopolymer Resin Grade Melt Flow Rate at 230 C, 2.16 kg [g/10 min] ASTM D1238 Tensile Strength at Yield ASTM D638 P401S P400S P403J Flexural Modulus ASTM D790 Notched Izod Impact at 23 C [J/m] ASTM D256 14,250 13,500 13, Heat Deflection Temperature at 0.45 MPa [ C] ASTM D Key Characteristic - Mechanical property balance - Mechanical property balance - High gloss - Good processability Recommended Application - Automotive compound - Automotive compound - Automotive compound 06

9 General Polypropylene PP Homopolymer Resin Grade P700J P701J P702J P901J Melt Flow Rate at 230 C, 2.16 kg [g/10 min] ASTM D Tensile Strength at Yield ASTM D Flexural Modulus ASTM D790 14,500 15,500 17,000 16,500 Notched Izod Impact at 23 C [J/m] ASTM D Heat Deflection Temperature at 0.45 MPa [ C] ASTM D Key Characteristic - High gloss - High heat stability - High productivity - High gloss - High heat stability - High productivity - High clarity - High gloss - Excellent flowability - High productivity - Good stiffness and impact balance Recommended Application - Automotive compound - Automotive compound - Automotive compound - Automotive compound 07

10 General Polypropylene PP Random Copolymer Resin Grade P750J P851JO Melt Flow Rate at 230 C, 2.16 kg [g/10 min] ASTM D1238 Tensile Strength at Yield ASTM D Flexural Modulus ASTM D790 Notched Izod Impact at 23 C [J/m] ASTM D256 12,000 12, Heat Deflection Temperature at 0.45 MPa [ C] ASTM D Key Characteristic - High clarity - Good processability and stiffness - High gloss - Good processability and stiffness - High gloss - Transparency and brightness Recommended Application - Automotive compound - Automotive compound 08

11 High Performance Polypropylene Block Copolymer Resin SCG Chemicals has expanded Polypropylene resin for outperforming the traditional PP Block Copolymer resin in order to meet the automotive industrial trends such light weight, high productivity and high safety standard. Our PP Block Copolymer resins are specially designed to achieve those requirements. These products have been developed by also using the technology from Mitsui Chemicals Inc. which are suitable for both exterior and interior automotive parts.

12 High Performance Polypropylene Block Copolymer Resin Grade Melt Flow Rate at 230 C, 2.16 kg [g/10 min] ISO 1133 P747WT P739ET P639AT Tensile Strength at Yield [MPa] ISO Tensile Modulus [MPa] ISO 527 Charpy Impact Strength at 23 C [kj/m 2 ] ISO 179 Heat Deflection Temperature at 0.45 MPa [ C] ISO 75 1,200 1,270 1, Key Characteristic - Aesthetic surface; Low gloss - High impact strength - Aesthetic surface; Suppressed tiger stripe/ flow mark - Good impact strength - High flowability - Aesthetic surface; Suppressed tiger stripe/ flow mark - Good impact strength - Super high flowability Recommended Application - Automotive and compound applications; interior part such as instrument panel, door trim, pillar and etc. - Automotive and compound applications; bumper, instrument panel and etc. - Automotive and compound applications; bumper, instrument panel and etc. 10

13 Overseas Offices & Contact Information Head Office: SCG Performance Chemicals Co., Ltd. 1 Siam Cement Road, Bangsue, Bangkok, Thailand Tel: Ext Fax: automotive@scg.com Hanoi Shanghai Guangzhou Myanmar Thailand Ho Chi Minh Surabaya Australia SOUTHEAST ASIA CHINA INDONESIA PT. TPC Indo Plastic and Chemicals (Surabaya Office) Lt.5, unit S , Kompleks Graha Festival Kav.3 Mayjend Yono Soewoyo, Graha Family, Surabaya Tel Fax MYANMAR SCG Plastics Co., Ltd. 2nd floor N. 136/137, Pyay Road, Saw Bea Gyi Gone, Yangon, Myanmar Tel , SCG Plastics (China) Co., Ltd. (Shanghai Office) RM 1012 Huarong Building No , South of Pudong Road, Pudong New Area, Shanghai, China, Tel Fax SCG Plastics (China) Co., Ltd. (Guangzhou Office) Unit 3207, Block B, China Shine Plaza, No.9 Lin He Xi Road, Tianhe, Guangzhou, China Tel Fax AUSTRALIA VIETNAM SCG Plastics Co., Ltd. (Ho Chi Minh Office) 10th Floor, An Phu Plaza Ly Chinh Thang P7, Q3 Ho Chi Minh City, Vietnam Tel Fax SCG Plastics Co., Ltd. (Hanoi Office) SCT Co., Ltd. (Hanoi) Representative Office 196 Truong Chinh, Dong Da dist., Hanoi city Tel Fax TPC Vina Plastic and Chemicals Corporation Co., Ltd. (Ho Chi Minh Office) U.901-9th Fl., Harbor View Tower, 35 Nguyen Hue Street District 1, Hochiminh City, Vietnam Tel Fax SCG Trading Australia Pty Ltd. Level 4, No.1 Chandos Street, St. Leonards NSW 2065, Australia Tel , Fax

14 SCG Performance Chemicals Co., Ltd. 1 Siam Cement Road, Bangsue, Bangkok, Thailand Tel: Ext Fax: